| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
This adds the build infrastructure for checking DT binding schema
documents and validating dts files using the binding schema.
Check DT binding schema documents:
make dt_binding_check
Build dts files and check using DT binding schema:
make dtbs_check
Optionally, DT_SCHEMA_FILES can be passed in with a schema file(s) to
use for validation. This makes it easier to find and fix errors
generated by a specific schema.
Currently, the validation targets are separate from a normal build to
avoid a hard dependency on the external DT schema project and because
there are lots of warnings generated.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-doc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
This adds the following commits from upstream:
f267e674d145 checks: Fix crash with multiple source annotations
3616b9a811b6 checks: Use source position information for check failures
2bdbd07a1223 checks: Make each message output atomic
a1eff70c02cf util: Add xa{v}sprintf_append functions
82a52ce4573b libfdt: Add a test for fdt_getprop_by_offset()
607b8586b383 PEP8 / Flake8 cleanups for setup.py
f9c0a425b648 Remove broken objdir / srcdir support
5182b5e6f28c pylibfdt: Use common PREFIX variable
d45bf1f5f2a6 Refine make tests_clean target
99284c4db9cb Refine pylibfdt_clean target
a4629cfaedfb Refine libfdt_clean target
08380fc43aa2 tests: Use modern octal literals for Python
8113c00b99d3 pylibfdt: Allow switch to Python 3 via environment variable PYTHON
11738cf01f15 libfdt: Don't use memcpy to handle unaligned reads on ARM
86a288a73670 checks: Restructure check_msg to decrease indentation
5667e7ef9a9a annotations: add the annotation functionality
8e20ccf52f90 annotations: add positions
ca930e20bb54 tests: Don't lose errors from make checkm
43366bb4eeee tests: Property count valgrind errors in wrapped tests
5062516fb8cb srcpos: Remove srcpos_empty
a3143fafbf83 Revert "annotations: add positions"
403cc79f06a1 checks: Update SPI bus check for 'spi-slave'
baa1d2cf7894 annotations: add positions
ff2ad38f6a5a Merge remote-tracking branch 'origin/pr/18'
aa7254d9cb17 libfdt: return correct value if #size-cells property is not present
49903aed7783 use ptrdiff_t modifier for printing pointer differences
da2b691ccf68 treesource: Fix dts output for phandles in middle of a sequence of ints
8f8b77a0d62d tests: Wrap check_align() calls with base_run_test()
522d81d572f2 Fix dts output with a REF_PATH marker
e45198c98359 Added test cases for target references
0fcffda15e9f Merge nodes with local target label references
1e4a0928f3b3 pylibfdt: Don't have setup.py depend on where it's invoked from
ca399b14956f pylibfdt: Eliminate run_setup make function
98972f1b3e33 pylibfdt: Improved version extraction
7ba2be6cda5f pylibfdt: Don't silence setup.py when V=1
7691f9d39301 pylibfdt: Make SETUP make variable
855b9963def9 pylibfdt: Simpler CFLAGS handling
47cafbeeb977 pylibfdt: Link extension module with libfdt rather than rebuilding
dd695d6afb19 pylibfdt: Correctly set build output directory
59327523d0d8 pylibfdt: We don't need include files from the base directory
e84742aa7b93 checks: fix simple-bus compatible matching
8c59a97ce096 Fix missing labels when emitting dts format
d448f9a5fd94 Revert dts output formatting changes of spaces around brackets
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
|
|
There is nothing arch specific about building dtb files other than their
location under /arch/*/boot/dts/. Keeping each arch aligned is a pain.
The dependencies and supported targets are all slightly different.
Also, a cross-compiler for each arch is needed, but really the host
compiler preprocessor is perfectly fine for building dtbs. Move the
build rules to a common location and remove the arch specific ones. This
is done in a single step to avoid warnings about overriding rules.
The build dependencies had been a mixture of 'scripts' and/or 'prepare'.
These pull in several dependencies some of which need a target compiler
(specifically devicetable-offsets.h) and aren't needed to build dtbs.
All that is really needed is dtc, so adjust the dependencies to only be
dtc.
This change enables support 'dtbs_install' on some arches which were
missing the target.
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Paul Burton <paul.burton@mips.com>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-kbuild@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: uclinux-h8-devel@lists.sourceforge.jp
Cc: linux-mips@linux-mips.org
Cc: nios2-dev@lists.rocketboards.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-xtensa@linux-xtensa.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Major changes are I2C and SPI bus checks, YAML output format (for
future validation), some new libfdt functions, and more libfdt
validation of dtbs.
The YAML addition adds an optional dependency on libyaml. pkg-config is
used to test for it and pkg-config became a kconfig dependency in 4.18.
This adds the following commits from upstream:
c86da84d30e4 Add support for YAML encoded output
361b5e7d8067 Make type_marker_length helper public
bfbfab047e45 pylibfdt: Add a means to add and delete notes
9005f4108e7c pylibfdt: Allow delprop() to return errors
b94c056b137e Make valgrind optional
fd06c54d4711 tests: Better testing of dtc -I fs mode
c3f50c9a86d9 tests: Allow dtbs_equal_unordered to ignore mem reserves
0ac9fdee37c7 dtc: trivial '-I fs -O dts' test
0fd1c8c783f3 pylibfdt: fdt_get_mem_rsv returns 2 uint64_t values
04853cad18f4 pylibfdt: Don't incorrectly / unnecessarily override uint64_t typemap
9619c8619c37 Kill bogus TYPE_BLOB marker type
ac68ff92ae20 parser: add TYPE_STRING marker to path references
90a190eb04d9 checks: add SPI bus checks
53a1bd546905 checks: add I2C bus checks
88f18909db73 dtc: Bump version to v1.4.7
85bce8b2f06d tests: Correction to vg_prepare_blob()
57f7f9e7bc7c tests: Don't call memcmp() with NULL arguments
c12b2b0c20eb libfdt: fdt_address_cells() and fdt_size_cells()
3fe0eeda0b7f livetree: Set phandle properties type to uint32
853649acceba pylibfdt: Support the sequential-write interface
9b0e4fe26093 tests: Improve fdt_resize() tests
1087504bb3e8 libfdt: Add necessary header padding in fdt_create()
c72fa777e613 libfdt: Copy the struct region in fdt_resize()
32b9c6130762 Preserve datatype markers when emitting dts format
6dcb8ba408ec libfdt: Add helpers for accessing unaligned words
42607f21d43e tests: Fix incorrect check name 'prop_name_chars'
9d78c33bf8a1 tests: fix grep for checks error messages
b770f3d1c13f pylibfdt: Support setting the name of a node
2f0d07e678e0 pylibfdt: Add functions to set and get properties as strings
354d3dc55939 pylibfdt: Update the bytearray size with pack()
3c374d46acce pylibfdt: Allow reading integer values from properties
49d32ce40bb4 pylibfdt: Use an unsigned type for fdt32_t
481246a0c13a pylibfdt: Avoid accessing the internal _fdt member in tests
9aafa33d99ed pylibfdt: Add functions to update properties
5a598671fdbf pylibfdt: Support device-tree creation/expansion
483e170625e1 pylibfdt: Add support for reading the memory reserve map
29bb05aa4200 pylibfdt: Add support for the rest of the header functions
582a7159a5d0 pylibfdt: Add support for fdt_next_node()
f0f8c9169819 pylibfdt: Reorder functions to match libfdt.h
64a69d123935 pylibfdt: Return string instead of bytearray from getprop()
4d09a83420df fdtput: Add documentation
e617cbe1bd67 fdtget: Add documentation
180a93924014 Use <inttypes.h> format specifiers in a bunch of places we should
b9af3b396576 scripts/dtc: Fixed format mismatch in fprintf
4b8fcc3d015c libfdt: Add fdt_check_full() function
c14223fb2292 tests: Use valgrind client requests for better checking
5b67d2b955a3 tests: Better handling of valgrind errors saving blobs
e2556aaeb506 tests: Remove unused #define
fb9c6abddaa8 Use size_t for blob lengths in utilfdt_read*
0112fda03bf6 libfdt: Add fdt_header_size()
6473a21d8bfe Consolidate utilfdt_read_len() variants
d5db5382c5e5 libfdt: Safer access to memory reservations
719d582e98ec libfdt: Propagate name errors in fdt_getprop_by_offset()
70166d62a27f libfdt: Safer access to strings section
eb890c0f77dc libfdt: Make fdt_check_header() more thorough
899d6fad93f3 libfdt: Improve sequential write state checking
04b5b4062ccd libfdt: Clean up header checking functions
44d3efedc816 Preserve datatype information when parsing dts
f0be81bd8de0 Make Property a subclass of bytearray
24b1f3f064d4 pylibfdt: Add a method to access the device tree directly
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
dtc has a new source file, yamltree.c, that needs to be copied when
syncing dtc sources.
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
It is tedious to specify extra compiler options for every file.
HOST_EXTRACFLAGS is useful to add options to all files in a
directory.
-I$(src)/libfdt is needed for all the files in this directory
to include libfdt_env.h etc. from scripts/dtc/libfdt/.
On the other hand, -I$(src) is used to include check-in headers
from generated C files. Thus, I added it only to dtc-lexer.lex.o
and dtc-parser.tab.o .
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
This adds the following commits from upstream:
84e414b0b5bc tests: Add a test case for the omit-if-no-ref keyword
4038fd90056e dtc: add ability to make nodes conditional on them being referenced
e1f139ea4900 checks: drop warning for missing PCI bridge bus-range
f4eba68d89ee checks: Print duplicate node name instead of parent name
46df1fb1b211 .travis.yml: Run valgrind checks via Travis
14a3002a1aee tests: Update valgrind suppressions for sw_tree1
02c5fe9debc0 tests: Remove valgrind error from tests/get_path
df536831d02c checks: add graph binding checks
2347c96edcbe checks: add a check for duplicate unit-addresses of child nodes
8f1b35f88395 Correct overlay syntactic sugar for generating target-path fragments
afbddcd418fb Suppress warnings on overlay fragments
119e27300359 Improve tests for dtc overlay generation
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Cherry-picked from dtc upstream commit e1f139ea4900fd0324c646822b4061fec6e08321.
Having a 'bus-range' property for PCI bridges should not be required,
so remove the warning when missing. There was some confusion with the
Linux kernel printing a message that no property is present and the OS
assigned the bus number. This message was intended to be informational
rather than a warning.
When the firmware doesn't enumerate the PCI bus and leaves it up to the
OS to do, then it is perfectly fine for the OS to assign bus numbers
and bus-range is not necessary.
There are a few cases where bus-range is needed or useful as Arnd
Bergmann summarized:
- Traditionally Linux avoided using multiple PCI domains, but instead
configured separate PCI host bridges to have non-overlapping
bus ranges so we can present them to user space as a single
domain, and run the kernel without CONFIG_PCI_DOMAINS.
Specifying the bus ranges this way would and give stable bus
numbers across boots when the probe order is not fixed.
- On certain ARM64 systems, we must only use the first
128 bus numbers based on the way the IOMMU identifies
the device with truncated bus/dev/fn number. There are probably
others like this, with various limitations.
- To leave some room for hotplugged devices, each slot on
a host bridge can in theory get a range of bus numbers
that are available when assigning bus numbers at boot time
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- pass HOSTLDFLAGS when compiling single .c host programs
- build genksyms lexer and parser files instead of using shipped
versions
- rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency
- let the top .gitignore globally ignore artifacts generated by flex,
bison, and asn1_compiler
- let the top Makefile globally clean artifacts generated by flex,
bison, and asn1_compiler
- use safer .SECONDARY marker instead of .PRECIOUS to prevent
intermediate files from being removed
- support -fmacro-prefix-map option to make __FILE__ a relative path
- fix # escaping to prepare for the future GNU Make release
- clean up deb-pkg by using debian tools instead of handrolled
source/changes generation
- improve rpm-pkg portability by supporting kernel-install as a
fallback of new-kernel-pkg
- extend Kconfig listnewconfig target to provide more information
* tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: extend output of 'listnewconfig'
kbuild: rpm-pkg: use kernel-install as a fallback for new-kernel-pkg
Kbuild: fix # escaping in .cmd files for future Make
kbuild: deb-pkg: split generating packaging and build
kbuild: use -fmacro-prefix-map to make __FILE__ a relative path
kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers
kbuild: rename *-asn1.[ch] to *.asn1.[ch]
kbuild: clean up *-asn1.[ch] patterns from top-level Makefile
.gitignore: move *-asn1.[ch] patterns to the top-level .gitignore
kbuild: add %.dtb.S and %.dtb to 'targets' automatically
kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically
genksyms: generate lexer and parser during build instead of shipping
kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile
.gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore
kbuild: use HOSTLDFLAGS for single .c executables
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"I have one regression fix for a minor build problem after the
architecture removal series, plus a rework of the barriers in the
readl/writel functions, thanks to work by Sinan Kaya:
This started from a discussion on the linuxpcc and rdma mailing
lists[1]. To summarize, we decided that architectures are responsible
to serialize readl() and writel() accesses on a device MMIO space
relative to DMA performed by that device.
This series provides a pessimistic implementation of that behavior for
asm-generic/io.h, which is in turn used by a number of architectures
(h8300, microblaze, nios2, openrisc, s390, sparc, um, unicore32, and
xtensa). Some of those presumably need no extra barriers, or something
weaker than rmb()/wmb(), and they are advised to override the new
default for better performance.
For inb()/outb(), the same barriers are used, but architectures might
want to add another barrier to outb() here if that can guarantee
non-posted behavior (some architectures can, others cannot do that).
The readl_relaxed()/writel_relaxed() family of functions retains the
existing behavior with no extra barriers"
[1] https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-March/170481.html
* tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
io: change writeX_relaxed() to remove barriers
io: change readX_relaxed() to remove barriers
dts: remove cris & metag dts hard link file
io: change inX() to have their own IO barrier overrides
io: change outX() to have their own IO barrier overrides
io: define stronger ordering for the default writeX() implementation
io: define stronger ordering for the default readX() implementation
io: define several IO & PIO barrier types for the asm-generic version
|
|
Files generated by if_changed* must be added to 'targets' to include
*.cmd files. Otherwise, they would be regenerated every time.
The build system automatically adds objects to 'targets' where
appropriate, such as obj-y, extra-y, etc. but does nothing for
intermediate files. So, each Makefile needs to add them by itself.
There are some common cases where objects are generated by chained
rules. Lexers and parsers are compiled like follows:
%.lex.o <- %.lex.c <- %.l
%.tab.o <- %.tab.c <- %.y
They are common patterns, so it is reasonable to take care of them
in the core Makefile instead of requiring each Makefile to do so.
At this moment, you cannot delete 'target += zconf.lex.c' in the
Kconfig Makefile because zconf.lex.c is included from zconf.tab.c
instead of being compiled separately. It should be deleted after
Kconfig is more refactored.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
|
|
Files suffixed by .lex.c, .tab.[ch] are generated lexers, parsers,
respectively. Clean them up globally from the top Makefile.
Some of the final host programs those lexer/parser are linked into
are necessary for building external modules, but the intermediates
are unneeded. They can be cleaned away by 'make clean' instead of
'make mrproper'.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
|
|
These patterns are common to host programs that require lexer and parser.
Move them to the top .gitignore.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
|
|
arch cris & metag have been removed from supported archs.
The dts hard link files should also be removed, or the ctags
tool will give warning.
execute"ctags -R", output:
ctags: Warning: cannot open source file
"scripts/dtc/include-prefixes/cris" : No such file or directory
ctags: Warning: cannot open source file
"scripts/dtc/include-prefixes/metag" : No such file or directory
Signed-off-by: Liu Changcheng <changcheng.liu@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This adds the following commits from upstream:
aadd0b65c987 checks: centralize printing of property names in failure messages
88960e398907 checks: centralize printing of node path in check_msg
f1879e1a50eb Add limited read-only support for older (V2 and V3) device tree to libfdt.
37dea76e9700 srcpos: drop special handling of tab
65893da4aee0 libfdt: overlay: Add missing license
962a45ca034d Avoid installing pylibfdt when dependencies are missing
cd6ea1b2bea6 Makefile: Split INSTALL out into INSTALL_{PROGRAM,LIB,DATA,SCRIPT}
51b3a16338df Makefile.tests: Add LIBDL make(1) variable for portability sake
333d533a8f4d Attempt to auto-detect stat(1) being used if not given proper invocation
e54388015af1 dtc: Bump version to v1.4.6
a1fe86f380cb fdtoverlay: Switch from using alloca to malloc
c8d5472de3ff tests: Improve compatibility with other platforms
c81d389a10cc checks: add chosen node checks
e671852042a7 checks: add aliases node checks
d0c44ebe3f42 checks: check for #{size,address}-cells without child nodes
18a3d84bb802 checks: add string list check for *-names properties
8fe94fd6f19f checks: add string list check
6c5730819604 checks: add a string check for 'label' property
a384191eba09 checks: fix sound-dai phandle with arg property check
b260c4f610c0 Fix ambiguous grammar for devicetree rule
fe667e382bac tests: Add some basic tests for the pci_bridge checks
7975f6422260 Fix widespread incorrect use of strneq(), replace with new strprefixeq()
fca296445eab Add strstarts() helper function
cc392f089007 tests: Check non-matching cases for fdt_node_check_compatible()
bba26a5291c8 livetree: avoid assertion of orphan phandles with overlays
c8f8194d76cc implement strnlen for systems that need it
c8b38f65fdec libfdt: Remove leading underscores from identifiers
3b62fdaebfe5 Remove leading underscores from identifiers
2d45d1c5c65e Replace FDT_VERSION() with stringify()
2e6fe5a107b5 Fix some errors in comments
b0ae9e4b0ceb tests: Correct warning in sw_tree1.c
Commit c8b38f65fdec upstream ("libfdt: Remove leading underscores from
identifiers") changed the multiple inclusion define protection, so the
kernel's libfdt_env.h needs the corresponding update.
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Now that the kernel build supports flex and bison, remove the _shipped
files and generate them during the build instead.
Based on Masahiro's original patch.
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
"A bigger diffstat than usual with the kbuild changes and a tree wide
fix in the binding documentation.
Summary:
- kbuild cleanups and improvements for dtbs
- Code clean-up of overlay code and fixing for some long standing
memory leak and race condition in applying overlays
- Improvements to DT memory usage making sysfs/kobjects optional and
skipping unflattening of disabled nodes. This is part of kernel
tinification efforts.
- Final piece of removing storing the full path for every DT node.
The prerequisite conversion of printk's to use device_node format
specifier happened in 4.14.
- Sync with current upstream dtc. This brings additional checks to
dtb compiling.
- Binding doc tree wide removal of leading 0s from examples
- RTC binding documentation adding missing devices and some
consolidation of duplicated bindings
- Vendor prefix documentation for nutsboard, Silicon Storage
Technology, shimafuji, Tecon Microprocessor Technologies, DH
electronics GmbH, Opal Kelly, and Next Thing"
* tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: usb: add #phy-cells to usb-nop-xceiv
dt-bindings: Remove leading zeros from bindings notation
kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib
MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry
kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile
.gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore
.gitignore: sort normal pattern rules alphabetically
dt-bindings: add vendor prefix for Next Thing Co.
scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9
of: dynamic: fix memory leak related to properties of __of_node_dup
of: overlay: make pr_err() string unique
of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove
of: overlay: remove unneeded check for NULL kbasename()
of: overlay: remove a dependency on device node full_name
of: overlay: simplify applying symbols from an overlay
of: overlay: avoid race condition between applying multiple overlays
of: overlay: loosen overly strict phandle clash check
of: overlay: expand check of whether overlay changeset can be removed
of: overlay: detect cases where device tree may become corrupt
of: overlay: minor restructuring
...
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pickup the fix for handling unresolved phandles in overlays.
This adds the following commits from upstream:
c1e55a5513e9 checks: fix handling of unresolved phandles for dts plugins
f8872e29ce06 tests: Avoid 64-bit arithmetic in assembler
48c91c08bcfa libfdt: add stringlist functions to linker script
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
This adds the following commits from upstream:
b1a60033c110 tests: Add a test for overlays syntactic sugar
737b2df39cc8 overlay: Add syntactic sugar version of overlays
497432fd2131 checks: Use proper format modifier for size_t
22a65c5331c2 dtc: Bump version to v1.4.5
c575d8059fff Add fdtoverlay to .gitignore
b6a6f9490d19 fdtoverlay: Sanity check blob size
8c1eb1526d2d pylibfdt: Use Python2 explicitly
ee3d26f6960b checks: add interrupts property check
c1e7738988f5 checks: add gpio binding properties check
b3bbac02d5e3 checks: add phandle with arg property checks
fe50bd1ecc1d fdtget: Split out cell list display into a new function
62d812308d11 README: Add a note about test_tree1.dts
5bed86aee9e8 pylibfdt: Add support for fdt_subnode_offset()
46f31b65b3b3 pylibfdt: Add support for fdt_node_offset_by_phandle()
a3ae43723687 pylibfdt: Add support for fdt_parent_offset()
a198af80344c pylibfdt: Add support for fdt_get_phandle()
b9eba92ea50f tests: Return a failure code when any tests fail
155faf6cc209 pylibfdt: Use local pylibfdt module
50e5cd07f325 pylibfdt: Add a test for use of uint32_t
ab78860f09f5 pylibfdt: Add stdint include to fix uint32_t
36f511fb1113 tests: Add stacked overlay tests on fdtoverlay
1bb00655d3e5 fdt: Allow stacked overlays phandle references
a33c2247ac8d Introduce fdt_setprop_placeholder() method
0016f8c2aa32 dtc: change default phandles to ePAPR style instead of both
e3b9a9588a35 tests: fdtoverlay unit test
42409146f2db fdtoverlay: A tool that applies overlays
aae22722fc8d manual: Document missing options
13ce6e1c2fc4 dtc: fix sprintf() format string error, again
d990b8013889 Makefile: Fix build on MSYS2 and Cygwin
51f56dedf8ea Clean up shared library compile/link options
21a2bc896e3d Suppress expected error message in fdtdump test
2a42b14d0d03 dtc: check.c fix compile error
a10cb3c818d3 Fix get_node_by_path string equality check
548aea2c436a fdtdump: Discourage use of fdtdump
c2258841a785 fdtdump: Fix over-zealous version check
9067ee4be0e6 Fix a few whitespace and style nits
e56f2b07be38 pylibfdt: Use setup.py to build the swig file
896f1c133265 pylibfdt: Use Makefile constructs to implement NO_PYTHON
90db6d9989ca pylibfdt: Allow setup.py to operate stand-alone
e20d9658cd8f Add Coverity Scan support
b04a2cf08862 pylibfdt: Fix code style in setup.py
1c5170d3a466 pylibfdt: Rename libfdt.swig to libfdt.i
580a9f6c2880 Add a libfdt function to write a property placeholder
ab15256d8d02 pylibfdt: Use the call function to simplify the Makefile
9f2e3a3a1f19 pylibfdt: Use the correct libfdt version in the module
e91c652af215 pylibfdt: Enable installation of Python module
8a892fd85d94 pylibfdt: Allow building to be disabled
741cdff85d3e .travis.yml: Add builds with and without Python library prerequisites
14c4171f4f9a pylibfdt: Use package_dir to set the package directory
89a5062ab231 pylibfdt: Use environment to pass C flags and files
4e0e0d049757 pylibfdt: Allow pkg-config to be supplied in the environment
6afd7d9688f5 Correct typo: s/pylibgfdt/pylibfdt/
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
libfdt has gained some new files. We need to include them in the
kernel's copy.
Reported-by: Kyle Yan <kyan@codeaurora.org>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Update dtx_diff include paths in the same manner as:
commit b12869a8d519 ("of: remove drivers/of/testcase-data from
include search path for CPP"), commit 5ffa2aed389c ("of: remove
arch/$(SRCARCH)/boot/dts from include search path for CPP"), and
commit 50f9ddaf64e1 ("of: search scripts/dtc/include-prefixes path
for both CPP and DTC").
Remove proposed include path kernel/dts/, which was never implemented
for the dtb build.
For the diff case, each source file is compiled separately. For
each of those compiles, provide the location of the source file
as an include path, not the location of both source files.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
dtc uses an incorrect format specifier for printing a uint64_t value.
uint64_t may be either 'unsigned long' or 'unsigned long long' depending
on the host architecture.
Fix this by using %llx and casting to unsigned long long, which ensures
that we always have a wide enough variable to print 64 bits of hex.
HOSTCC scripts/dtc/checks.o
scripts/dtc/checks.c: In function 'check_simple_bus_reg':
scripts/dtc/checks.c:876:2: warning: format '%zx' expects argument of type 'size_t', but argument 4 has type 'uint64_t' [-Wformat=]
snprintf(unit_addr, sizeof(unit_addr), "%zx", reg);
^
scripts/dtc/checks.c:876:2: warning: format '%zx' expects argument of type 'size_t', but argument 4 has type 'uint64_t' [-Wformat=]
Link: http://lkml.kernel.org/r/20170829222034.GJ20805@n2100.armlinux.org.uk
Fixes: 828d4cdd012c ("dtc: check.c fix compile error")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Update the cpp include flags for compiling device tree dts files
to match the changes made to the kernel build process in
commit d5d332d3f7e8 ("devicetree: Move include prefixes from arch
to separate directory").
Cc: <stable@vger.kernel.org> # 4.12
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull misc Kbuild updates from Masahiro Yamada:
- Use more portable shebang for Perl scripts
- Remove trailing spaces from GCC version in kernel log
- Make initramfs generation deterministic
* tag 'kbuild-misc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: create deterministic initramfs directory listings
scripts/mkcompile_h: Remove trailing spaces from compiler version
scripts: Switch to more portable Perl shebang
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
- vsprintf format specifier %pOF for device_node's. This will enable us
to stop storing the full node names. Conversion of users will happen
next cycle.
- Update documentation to point to DT specification instead of ePAPR.
- Split out graph and property functions to a separate file.
- New of-graph functions for ALSA
- Add vendor prefixes for RISC-V, Linksys, iWave Systems, Roofull,
Itead, and BananaPi.
- Improve dtx_diff utility filename printing.
* tag 'devicetree-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (32 commits)
of: document /sys/firmware/fdt
dt-bindings: Add RISC-V vendor prefix
vsprintf: Add %p extension "%pOF" for device tree
of: find_node_by_full_name rewrite to compare each level
of: use kbasename instead of open coding
dt-bindings: thermal: add file extension to brcm,ns-thermal
of: update ePAPR references to point to Devicetree Specification
scripts/dtc: dtx_diff - Show real file names in diff header
of: detect invalid phandle in overlay
of: be consistent in form of file mode
of: make __of_attach_node() static
of: address.c header comment typo
of: fdt.c header comment typo
of: make of_fdt_is_compatible() static
dt-bindings: display-timing.txt convert non-ascii characters to ascii
Documentation: remove overlay-notes reference to non-existent file
dt-bindings: usb: exynos-usb: Add missing required VDD properties
dt-bindings: Add vendor prefix for Linksys
MAINTAINERS: add device tree ABI documentation file
of: Add vendor prefix for iWave Systems Technologies Pvt. Ltd
...
|
|
As the comparison uses process substitution to pass files after
conversion to DTS format, the diff header doesn't show the real
filenames, but the names of the file descriptors used:
--- /dev/fd/63 2017-06-22 11:21:47.531637188 +0200
+++ /dev/fd/62 2017-06-22 11:21:47.531637188 +0200
This is especially annoying when comparing a bunch of DT files in a
loop, as the output doesn't show a clue about which files it refers to.
Fix this by explicitly passing the original file names to the diff
command using the --label option, giving e.g.:
--- arch/arm/boot/dts/r8a7791-koelsch.dtb
+++ arch/arm/boot/dts/r8a7791-porter.dtb
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree fixes from Rob Herring:
- fix missing allocation failure handling in fdt code
- fix dtc compile error on 32-bit hosts
- revert bad sparse changes causing GCC7 warnings
* tag 'devicetree-fixes-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: fdt: add missing allocation-failure check
dtc: check.c fix compile error
Partially Revert "of: fix sparse warnings in fdt, irq, reserved mem, and resolver code"
|
|
We use a directory under arch/$ARCH/boot/dts as an include path
that has links outside of the subtree to find dt-bindings from under
include/dt-bindings. That's been working well, but new DT architectures
haven't been adding them by default.
Recently there's been a desire to share some of the DT material between
arm and arm64, which originally caused developers to create symlinks or
relative includes between the subtrees. This isn't ideal -- it breaks
if the DT files aren't stored in the exact same hierarchy as the kernel
tree, and generally it's just icky.
As a somewhat cleaner solution we decided to add a $ARCH/ prefix link
once, and allow DTS files to reference dtsi (and dts) files in other
architectures that way.
Original approach was to create these links under each architecture,
but it lead to the problem of recursive symlinks.
As a remedy, move the include link directories out of the architecture
trees into a common location. At the same time, they can now share one
directory and one dt-bindings/ link as well.
Fixes: 4027494ae6e3 ('ARM: dts: add arm/arm64 include symlinks')
Reported-by: Russell King <linux@armlinux.org.uk>
Reported-by: Omar Sandoval <osandov@osandov.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linux-arch <linux-arch@vger.kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Fix the following compile error found on odroid-xu4:
checks.c: In function ‘check_simple_bus_reg’:
checks.c:876:41: error: format ‘%lx’ expects argument of type
‘long unsigned int’, but argument 4 has type
‘uint64_t{aka long long unsigned int}’ [-Werror=format=]
snprintf(unit_addr, sizeof(unit_addr), "%lx", reg);
^
checks.c:876:41: error: format ‘%lx’ expects argument of type
‘long unsigned int’, but argument 4 has type
‘uint64_t {aka long long unsigned int}’ [-Werror=format=]
cc1: all warnings being treated as errors
Makefile:304: recipe for target 'checks.o' failed
make: *** [checks.o] Error 1
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
[dwg: Correct new format to be correct in general]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[robh: cherry-picked from upstream dtc commit 2a42b14d0d03]
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The default NetBSD package manager is pkgsrc and it installs Perl
along other third party programs under custom and configurable prefix.
The default prefix for binary prebuilt packages is /usr/pkg, and the
Perl executable lands in /usr/pkg/bin/perl.
This change switches "/usr/bin/perl" to "/usr/bin/env perl" as it's
the most portable solution that should work for almost everybody.
Perl's executable is detected automatically.
This change switches -w option passed to the executable with more
modern "use warnings;" approach. There is no functional change to the
default behavior.
While there, drop "require 5" from scripts/namespace.pl (Perl from 1994?).
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
dtc gained new warnings checking PCI and simple buses, unit address
formatting, and stricter node and property name checking. Disable the
new dtc warnings by default as there are 1000s. As before, warnings are
enabled with W=1 or W=2. The strict node and property name checks are a
bit subjective, so they are only enabled for W=2.
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
This adds the following commits from upstream:
756ffc4f52f6 Build pylibfdt as part of the normal build process
8cb3896358e9 Adjust libfdt.h to work with swig
b40aa8359aff Mention pylibfdt in the documentation
12cfb740cc76 Add tests for pylibfdt
50f250701631 Add an initial Python library for libfdt
cdbb2b6c7a3a checks: Warn on node name unit-addresses with '0x' or leading 0s
4c15d5da17cc checks: Add bus checks for simple-bus buses
33c3985226d3 checks: Add bus checks for PCI buses
558cd81bdd43 dtc: Bump version to v1.4.4
c17a811c62eb fdtput: Remove star from value_len documentation
194d5caaefcb fdtget: Use @return to document the return value
d922ecdd017b tests: Make realloc_fdt() really allocate *fdt
921cc17fec29 libfdt: overlay: Check the value of the right variable
9ffdf60bf463 dtc: Simplify asm_emit_string() implementation
881012e44386 libfdt: Change names of sparse helper macros
bad5b28049e5 Fix assorted sparse warnings
672ac09ea04d Clean up gcc attributes
49300f2ade6a dtc: Don't abuse struct fdt_reserve_entry
fa8bc7f928ac dtc: Bump version to v1.4.3
34a9886a177f Add printf format attributes
f72508e2b6ca Correct some broken printf() like format mismatches
397d5ef0203c libfdt: Add fdt_setprop_empty()
69a1bd6ad3f9 libfdt: Remove undefined behaviour setting empty properties
acd1b534a592 Print output filename as part of warning messages
120775eb1cf3 dtc: Use streq() in preference to strcmp()
852e9ecbe197 checks: Add Warning for stricter node name character checking
ef0e8f061534 checks: Add Warning for stricter property name character checking
00d7bb1f4b0e dtc: pos parameter to srcpos_string() can't be NULL
95d57726bca4 livetree.c: Fix memory leak
3b9c97093d6e dtc: Fix NULL pointer use in dtlabel + dtref case
43eb551426ea manual: Fix typo it -> in
4baf15f7f13f Makefile: Add tags rule
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Further automate the dtc update script to fill in the dtc version and
commit log.
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Sync to upstream dtc commit 0931cea3ba20 ("dtc: fdtdump: check fdt if
not in scanning mode"). In particular, this pulls in dtc overlay
support.
This adds the following commits from upstream:
f88865469b65 dtc: Fix memory leak in character literal parsing
00fbb8696b66 Rename boot_info
1ef86ad2c24f dtc: Clean up /dts-v1/ and /plugin/ handling in grammar
e3c769aa9c16 dtc: Don't always generate __symbols__ for plugins
c96cb3c0169e tests: Don't use -@ on plugin de/recompile tests
66381538ce24 tests: Remove "suppression of fixups" tests
ba765b273f0f tests: Clarify dtc overlay tests
6ea8cd944fcd tests: More thorough tests of libfdt overlay application without dtc
7d8ef6e1db97 tests: Correct fdt handling of overlays without fixups and base trees without symbols
b4dc0ed8b127 tests: Fix double expansion bugs in test code
3ea879dc0c8f tests: Split overlay tests into those with do/don't exercise dtc plugin generation
47b4d66a2f11 tests: Test auto-alias generation on base tree, not overlay
72e1ad811523 tests: Make overlay/plugin tests unconditional
e7b3c3b5951b tests: Add overlay tests
9637e3f772a9 tests: Add check_path test
20f29d8d41f6 dtc: Plugin and fixup support
a2c92cac53f8 dtc: Document the dynamic plugin internals
8f70ac39801d checks: Pass boot_info instead of root node
ea10f953878f libfdt: add missing errors to fdt_strerror()
daa75e8fa594 libfdt: fix fdt_stringlist_search()
e28eff5b787a libfdt: fix fdt_stringlist_count()
ae97c7722840 tests: overlay: Rename the device tree blobs to be more explicit
96162d2bd9cb tests: overlay: Add test suffix to the compiled blobs
5ce8634733b7 libfdt: Add fdt_overlay_apply to the exported symbols
804a9db90ad2 fdt: strerr: Remove spurious BADOVERLAY
e8c3a1a493fa tests: overlay: Move back the bad fixup tests
7a72d89d3f81 libfdt: overlay: Fix symbols and fixups nodes condition
cabbaa972cdd libfdt: overlay: Report a bad overlay for mismatching local fixups
deb0a5c1aeaa libfdt: Add BADPHANDLE error string
7b7a6be9ba15 libfdt: Don't use 'index' as a local variable name
aea8860d831e tests: Add tests cases for the overlay code
0cdd06c5135b libfdt: Add overlay application function
39240cc865cf libfdt: Extend the reach of FDT_ERR_BADPHANDLE
4aa3a6f5e6d9 libfdt: Add new errors for the overlay code
6d1832c9e64b dtc: Remove "home page" link
45fd440a9561 Fix some typing errors in libfdt.h and livetree.c
a59be4939c13 Merge tag 'v1.4.2'
a34bb721caca dtc: Fix assorted problems in the testcases for the -a option
874f40588d3e Implement the -a option to pad dtb aligned
ec02b34c05be dtc: Makefile improvements for release uploading
1ed45d40a137 dtc: Bump version to 1.4.2
36fd7331fb11 libfdt: simplify fdt_del_mem_rsv()
d877364e4a0f libfdt: Add fdt_setprop_inplace_namelen_partial
3e9037aaad44 libfdt: Add fdt_getprop_namelen_w
84e0e1346c68 libfdt: Add max phandle retrieval function
d29126c90acb libfdt: Add iterator over properties
902d0f0953d0 libfdt: Add a subnodes iterator macro
c539075ba8ba fdtput.c: Fix memory leak.
f79ddb83e185 fdtget.c: Fix memory leak
1074ee54b63f convert-dtsv0-lexer.l: fix memory leak
e24d39a024e6 fdtdump.c: make sure size_t argument to memchr is always unsigned.
44a59713cf05 Remove unused srcpos_dump() function
cb9241ae3453 DTC: Fix memory leak on flatname.
1ee0ae24ea09 Simplify check field and macro names
9d97527a8621 Remove property check functions
2e709d158e11 Remove tree check functions
c4cb12e193e3 Alter grammar to allow multiple /dts-v1/ tags
d71d25d76012 Use xasprintf() in srcpos
9dc404958e9c util: Add xasprintf portable asprintf variant
beef80b8b55f Correct a missing space in a fdt_header cast
68d43cec1253 Correct line lengths in libfdt.h
b0dbceafd49a Correct space-after-tab in libfdt.h
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Determining which kernel config options need to be enabled for a
given devicetree can be a painful process. Create a new tool to
find the drivers that may match a devicetree node compatible,
find the kernel config options that enable the driver, and
optionally report whether the kernel config option is enabled.
Signed-off-by: Gaurav Minocha <gaurav.minocha.os@gmail.com>
Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Sync to upstream dtc commit 53bf130b1cdd ("libfdt: simplify
fdt_node_check_compatible()"). This adds the following commits from
upstream:
53bf130 libfdt: simplify fdt_node_check_compatible()
c9d9121 Warn on node name unit-address presence/absence mismatch
2e53f9d Catch unsigned 32bit overflow when parsing flattened device tree offsets
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Sync to upstream dtc commit b06e55c88b9b ("Prevent crash on modulo by
zero"). This adds the following commits from upstream:
b06e55c Prevent crash on modulo by zero
b433450 Fix some bugs in processing of line directives
d728ad5 Fix crash on nul character in string escape sequence
1ab2205 Gracefully handle bad octal literals
1937095 Prevent crash on division by zero
d0b3ab0 libfdt: Fix undefined behaviour in fdt_offset_ptr()
d4c7c25 libfdt: check for potential overrun in _fdt_splice()
f58799b libfdt: Add some missing symbols to version.lds
af9f26d Remove duplicated -Werror in dtc Makefile
604e61e fdt: Add functions to retrieve strings
8702bd1 fdt: Add a function to get the index of a string
2218387 fdt: Add a function to count strings
554fde2 libfdt: fix comment block of fdt_get_property_namelen()
e5e6df7 fdtdump: Fix bug printing bytestrings with negative values
067829e Remove redundant fdtdump test code
897a429 Move fdt_path_offset alias tests to right tests section
2d1417c Add simple .travis.yml
f6dbc6c guess output file format
5e78dff guess input file format based on file content or file name
8b927bf tests: convert `echo -n` to `printf`
64c46b0 Fix crash with poorly defined #size-cells
Cc: Grant Likely <grant.likely@linaro.org>
Tested-by: Frank Rowand <frank.rowand@sonymobile.com>
Reviewed-by: Frank Rowand <frank.rowand@sonymobile.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
If kernel config options are not properly set, "make scripts" will not
compile dtc. Update the unable to find dtc error message to check
the kernel config and give better advice on how to create dtc.
Reword another error message to increase clarity.
Signed-off-by: Frank Rowand <frank.rowand@sonymobile.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Create script to diff device trees.
The device tree can be in any of the forms recognized by the dtc compiler:
- source
- binary blob
- file system tree (from /proc/devicetree)
If the device tree is a source file, then it is pre-processed in the
same way as it would be when built in the linux kernel source tree
before diffing.
Signed-off-by: Frank Rowand <frank.rowand@sonymobile.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Sync dtc with upstream as of commit 9d3649bd3be2 (Add testcases for
fdt_path_offset_namelen()).
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: devicetree@vger.kernel.org
|
|
The following script is used to import dtc upstream
into kernel. It was missing import of dtc/libfdt, with
this commit it will include the same.
Also, currently in arch and driver code that needs early access to
the flattened device tree it is necessary to add specific CFLAGS
so that when scripts/dtc/libfdt/libfdt.h is included the C
preprocessor is able to locate the libfdt versions of libfdt_env.h
and fdt.h without generating an error. So, this script replaces
angular brackets with quotation used to include header files
fdt.h and libfdt_env.h
Signed-off-by: Gaurav Minocha <gaurav.minocha.os@gmail.com>
[robh: reword commit headline and add 'git add']
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
|
|
A very simple script that automates pulling in a newer version of DTC.
Not particularly robust, but a whole lot better than doing it by hand
every time.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
|
|
Update to the latest version of dtc with the following notable
enhancements and bug fixes:
* fdtput: expand fdt if value does not fit
* dtc/fdt{get, put}/convert-dtsv0-lexer: convert to new usage helpers
* libfdt: Add fdt_next_subnode() to permit easy subnode iteration
* utilfdt_read: pass back up the length of data read
* util_version: new helper for displaying version info
* die: constify format string arg
* utilfdt_read_err: use xmalloc funcs
* Export fdt_stringlist_contains()
* dtc: Drop the '-S is deprecated' warning
* dtc/libfdt: sparse fixes
* dtc/libfdt: introduce fdt types for annotation by endian checkers
* Fix util_is_printable_string
* dtc: srcpos_verror() should print to stderr
* libfdt: Added missing functions to shared library
Shipped bison/flex generated files were built on an Ubuntu 13.10 system.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
|
|
Preparation patch before updating to upstream dtc version 1.4.0. This
change only contains the changes caused by a new version of bison
on the shipped files. There are no functional changes.
The shipped files were build on an Ubuntu 13.10 system
Signed-off-by: Grant Likely <grant.likely@linaro.org>
|
|
Previously, the #line parsing regex ended with ({WS}+[0-9]+)?. The {WS}
could match line-break characters. If the #line directive did not contain
the optional flags field at the end, this could cause any integer data on
the next line to be consumed as part of the #line directive parsing. This
could cause syntax errors (i.e. #line parsing consuming the leading 0
from a hex literal 0x1234, leaving x1234 to be parsed as cell data,
which is a syntax error), or invalid compilation results (i.e. simply
consuming literal 1234 as part of the #line processing, thus removing it
from the cell data).
Fix this by replacing {WS} with [ \t] so that it can't match line-breaks.
Convert all instances of {WS}, even though the other instances should be
irrelevant for any well-formed #line directive. This is done for
consistency and ultimate safety.
[Cherry picked from DTC commit a1ee6f068e1c8dbc62873645037a353d7852d5cc]
Reported-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
This patch merely updates the generated dtc parser and lexer files to
the output generated by Bison 2.5. The previous versions were generated
from version 2.4.1. The only reason for this commit is to minimize the
diff on the next commit which fixes a bug in the DTC #line directive
parsing. Otherwise the Bison changes would be intermingled with the
functional changes.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
