summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2019-08-22mac80211: minstrel_ht: fix infinite loop because supported is not being shiftedColin Ian King1-1/+1
Currently the for-loop will spin forever if variable supported is non-zero because supported is never changed. Fix this by adding in the missing right shift of supported. Addresses-Coverity: ("Infinite loop") Fixes: 48cb39522a9d ("mac80211: minstrel_ht: improve rate probing for devices with static fallback") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20190822122034.28664-1-colin.king@canonical.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-22nexthops: remove redundant assignment to variable errColin Ian King1-1/+1
Variable err is initialized to a value that is never read and it is re-assigned later. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused Value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-21mac80211: minstrel_ht: improve rate probing for devices with static fallbackFelix Fietkau3-28/+225
On some devices that only support static rate fallback tables sending rate control probing packets can be really expensive. Probing lower rates can already hurt throughput quite a bit. What hurts even more is the fact that on mt76x0/mt76x2, single probing packets can only be forced by directing packets at a different internal hardware queue, which causes some heavy reordering and extra latency. The reordering issue is mainly problematic while pushing lots of packets to a particular station. If there is little activity, the overhead of probing is neglegible. The static fallback behavior is designed to pretty much only handle rate control algorithms that use only a very limited set of rates on which the algorithm switches up/down based on packet error rate. In order to better support that kind of hardware, this patch implements a different approach to rate probing where it switches to a slightly higher rate, waits for tx status feedback, then updates the stats and switches back to the new max throughput rate. This only triggers above a packet rate of 100 per stats interval (~50ms). For that kind of probing, the code has to reduce the set of probing rates a lot more compared to single packet probing, so it uses only one packet per MCS group which is either slightly faster, or as close as possible to the max throughput rate. This allows switching between similar rates with different numbers of streams. The algorithm assumes that the hardware will work its way lower within an MCS group in case of retransmissions, so that lower rates don't have to be probed by the high packets per second rate probing code. To further reduce the search space, it also does not probe rates with lower channel bandwidth than the max throughput rate. At the moment, these changes will only affect mt76x0/mt76x2. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: minstrel_ht: fix default max throughput rate indexesFelix Fietkau1-6/+14
Use the first supported rate instead of 0 (which can be invalid) Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20190820095449.45255-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: minstrel_ht: reduce unnecessary rate probing attemptsFelix Fietkau1-0/+15
On hardware with static fallback tables (e.g. mt76x2), rate probing attempts can be very expensive. On such devices, avoid sampling rates slower than the per-group max throughput rate, based on the assumption that the fallback table will take care of probing lower rates within that group if the higher rates fail. To further reduce unnecessary probing attempts, skip duplicate attempts on rates slower than the max throughput rate. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20190820095449.45255-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: minstrel_ht: fix per-group max throughput rate initializationFelix Fietkau1-1/+1
The group number needs to be multiplied by the number of rates per group to get the full rate index Fixes: 5935839ad735 ("mac80211: improve minstrel_ht rate sorting by throughput & probability") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20190820095449.45255-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21nl80211: Add support for EDMG channelsAlexei Avshalom Lazar5-6/+240
802.11ay specification defines Enhanced Directional Multi-Gigabit (EDMG) STA and AP which allow channel bonding of 2 channels and more. Introduce new NL attributes that are needed for enabling and configuring EDMG support. Two new attributes are used by kernel to publish driver's EDMG capabilities to the userspace: NL80211_BAND_ATTR_EDMG_CHANNELS - bitmap field that indicates the 2.16 GHz channel(s) that are supported by the driver. When this attribute is not set it means driver does not support EDMG. NL80211_BAND_ATTR_EDMG_BW_CONFIG - represent the channel bandwidth configurations supported by the driver. Additional two new attributes are used by the userspace for connect command and for AP configuration: NL80211_ATTR_WIPHY_EDMG_CHANNELS NL80211_ATTR_WIPHY_EDMG_BW_CONFIG New rate info flag - RATE_INFO_FLAGS_EDMG, can be reported from driver and used for bitrate calculation that will take into account EDMG according to the 802.11ay specification. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Link: https://lore.kernel.org/r/1566138918-3823-2-git-send-email-ailizaro@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: fix possible NULL pointerderef in obss pd codeJohn Crispin1-1/+2
he_spr_ie_elem is dereferenced before the NULL check. fix this by moving the assignment after the check. fixes commit 697f6c507c74 ("mac80211: propagate HE operation info into bss_conf") This was reported by the static code checker. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190813070712.25509-1-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: add assoc-at supportBen Greear2-0/+5
Report timestamp for when sta becomes associated. Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20190809180001.26393-2-greearb@candelatech.com [fix ktime_get_boot_ns() to ktime_get_boottime_ns(), assoc_at type to u64] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: Support assoc-at timer in sta-infoBen Greear1-0/+1
Report timestamp of when sta became associated. This is the boottime clock, units are nano-seconds. Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20190809180001.26393-1-greearb@candelatech.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: apply same mandatory rate flags for 5GHz and 6GHzArend van Spriel1-0/+1
For the new 6GHz band the same rules apply for mandatory rates so add it to set_mandatory_flags_band() function. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-9-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: ibss: use 11a mandatory rates for 6GHz band operationArend van Spriel1-5/+11
The default mandatory rates, ie. when not specified by user-space, is determined by the band. Select 11a rateset for 6GHz band. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-8-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: use same IR permissive rules for 6GHz bandArend van Spriel1-1/+2
The function cfg80211_ir_permissive_chan() is applicable for 6GHz band as well so make sure it is handled. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-7-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: add 6GHz in code handling array with NUM_NL80211_BANDS entriesArend van Spriel2-1/+3
In nl80211.c there is a policy for all bands in NUM_NL80211_BANDS and in trace.h there is a callback trace for multicast rates which is per band in NUM_NL80211_BANDS. Both need to be extended for the new NL80211_BAND_6GHZ. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-6-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: extend ieee80211_operating_class_to_band() for 6GHzArend van Spriel1-0/+3
Add 6GHz operating class range as defined in 802.11ax D4.1 Annex E. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-5-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: util: add 6GHz channel to freq conversion and vice versaArend van Spriel1-1/+9
Extend the functions ieee80211_channel_to_frequency() and ieee80211_frequency_to_channel() to support 6GHz band according specification in 802.11ax D4.1 27.3.22.2. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-4-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: add 6GHz UNII band definitionsArend van Spriel1-2/+19
For the new 6GHz there are new UNII band definitions as listed in the FCC notice [1]. [1] https://docs.fcc.gov/public/attachments/FCC-18-147A1_Rcd.pdf Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-3-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21nl80211: add 6GHz band definition to enum nl80211_bandArend van Spriel1-0/+1
In the 802.11ax specification a new band is introduced, which is also proposed by FCC for unlicensed use. This band is referred to as 6GHz spanning frequency range from 5925 to 7125 MHz. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-2-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: add missing length field increment when generating Radiotap headerJohn Crispin1-0/+1
The code generating the Tx Radiotap header when using tx_status_ext was missing a field increment after setting the VHT bandwidth. Fixes: 3d07ffcaf320 ("mac80211: add struct ieee80211_tx_status support to ieee80211_add_tx_radiotap_header") Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190807075949.32414-4-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: 80Mhz was not reported properly when using tx_status_extJohn Crispin1-1/+1
When reporting 80MHz, we need to set 4 and not 2 inside the corresponding field inside the Tx Radiotap header. Fixes: 3d07ffcaf320 ("mac80211: add struct ieee80211_tx_status support to ieee80211_add_tx_radiotap_header") Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190807075949.32414-3-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: fix bad guard when reporting legacy ratesJohn Crispin1-7/+7
When reporting legacy rates inside the TX Radiotap header we need to split the check between "uses tx_statua_ext" and "is legacy rate". Not doing so would make the code drop into the !tx_status_ext path. Fixes: 3d07ffcaf320 ("mac80211: add struct ieee80211_tx_status support to ieee80211_add_tx_radiotap_header") Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190807075949.32414-2-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: fix TX legacy rate reporting when tx_status_ext is usedJohn Crispin1-3/+9
The RX Radiotap header length was not calculated properly when reporting legacy rates using tx_status_ext. Fixes: 3d07ffcaf320 ("mac80211: add struct ieee80211_tx_status support to ieee80211_add_tx_radiotap_header") Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190807075949.32414-1-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-20net: dsa: enable and disable all portsVivien Didelot1-0/+11
Call the .port_enable and .port_disable functions for all ports, not only the user ports, so that drivers may optimize the power consumption of all ports after a successful setup. Unused ports are now disabled on setup. CPU and DSA ports are now enabled on setup and disabled on teardown. User ports were already enabled at slave creation and disabled at slave destruction. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-20net: dsa: use a single switch statement for port setupVivien Didelot1-48/+39
It is currently difficult to read the different steps involved in the setup and teardown of ports in the DSA code. Keep it simple with a single switch statement for each port type: UNUSED, CPU, DSA, or USER. Also no need to call devlink_port_unregister from within dsa_port_setup as this step is inconditionally handled by dsa_port_teardown on error. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-20sctp: remove net sctp.x_enable working as a global switchXin Long1-16/+12
The netns sctp feature flags shouldn't work as a global switch, which is mostly like a firewall/netfilter's job. Also, it will break asoc as it discard or accept chunks incorrectly when net sctp.x_enable is changed after the asoc is created. Since each type of chunk's processing function will check the corresp asoc's feature flag, this 'global switch' should be removed, and net sctp.x_enable will only work as the default feature flags for the future sctp sockets/endpoints. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-20sctp: add SCTP_AUTH_SUPPORTED sockoptXin Long1-0/+86
SCTP_AUTH_SUPPORTED sockopt is used to set enpoint's auth flag. With this feature, each endpoint will have its own flag for its future asoc's auth_capable, instead of netns auth flag. Note that when both ep's auth_enable is enabled, endpoint auth related data should be initialized. If asconf_enable is also set, SCTP_CID_ASCONF/SCTP_CID_ASCONF_ACK should be added into auth_chunk_list. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-20sctp: add sctp_auth_init and sctp_auth_freeXin Long2-56/+74
This patch is to factor out sctp_auth_init and sctp_auth_free functions, and sctp_auth_init will also be used in the next patch for SCTP_AUTH_SUPPORTED sockopt. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-20sctp: use ep and asoc auth_enable properlyXin Long2-33/+44
sctp has per endpoint auth flag and per asoc auth flag, and the asoc one should be checked when coming to asoc and the endpoint one should be checked when coming to endpoint. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-20sctp: add SCTP_ASCONF_SUPPORTED sockoptXin Long1-0/+82
SCTP_ASCONF_SUPPORTED sockopt is used to set enpoint's asconf flag. With this feature, each endpoint will have its own flag for its future asoc's asconf_capable, instead of netns asconf flag. Note that when both ep's asconf_enable and auth_enable are enabled, SCTP_CID_ASCONF and SCTP_CID_ASCONF_ACK should be added into auth_chunk_list. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-20sctp: check asoc peer.asconf_capable before processing asconfXin Long1-2/+4
asconf chunks should be dropped when the asoc doesn't support asconf feature. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-20sctp: not set peer.asconf_capable in sctp_association_initXin Long1-9/+0
asoc->peer.asconf_capable is to be set during handshake, and its value should be initialized to 0. net->sctp.addip_noauth will be checked in sctp_process_init when processing INIT_ACK on client and COOKIE_ECHO on server. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-20sctp: add asconf_enable in struct sctp_endpointXin Long3-20/+18
This patch is to make addip/asconf flag per endpoint, and its value is initialized by the per netns flag, net->sctp.addip_enable. It also replaces the checks of net->sctp.addip_enable with ep->asconf_enable in some places. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-20net: remove empty inet_exit_netLi RongQing1-5/+0
Pointer members of an object with static storage duration, if not explicitly initialized, will be initialized to a NULL pointer. The net namespace API checks if this pointer is not NULL before using it, it are safe to remove the function. Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-19net: flow_offload: convert block_ing_cb_list to regular list typeVlad Buslov1-6/+7
RCU list block_ing_cb_list is protected by rcu read lock in flow_block_ing_cmd() and with flow_indr_block_ing_cb_lock mutex in all functions that use it. However, flow_block_ing_cmd() needs to call blocking functions while iterating block_ing_cb_list which leads to following suspicious RCU usage warning: [ 401.510948] ============================= [ 401.510952] WARNING: suspicious RCU usage [ 401.510993] 5.3.0-rc3+ #589 Not tainted [ 401.510996] ----------------------------- [ 401.511001] include/linux/rcupdate.h:265 Illegal context switch in RCU read-side critical section! [ 401.511004] other info that might help us debug this: [ 401.511008] rcu_scheduler_active = 2, debug_locks = 1 [ 401.511012] 7 locks held by test-ecmp-add-v/7576: [ 401.511015] #0: 00000000081d71a5 (sb_writers#4){.+.+}, at: vfs_write+0x166/0x1d0 [ 401.511037] #1: 000000002bd338c3 (&of->mutex){+.+.}, at: kernfs_fop_write+0xef/0x1b0 [ 401.511051] #2: 00000000c921c634 (kn->count#317){.+.+}, at: kernfs_fop_write+0xf7/0x1b0 [ 401.511062] #3: 00000000a19cdd56 (&dev->mutex){....}, at: sriov_numvfs_store+0x6b/0x130 [ 401.511079] #4: 000000005425fa52 (pernet_ops_rwsem){++++}, at: unregister_netdevice_notifier+0x30/0x140 [ 401.511092] #5: 00000000c5822793 (rtnl_mutex){+.+.}, at: unregister_netdevice_notifier+0x35/0x140 [ 401.511101] #6: 00000000c2f3507e (rcu_read_lock){....}, at: flow_block_ing_cmd+0x5/0x130 [ 401.511115] stack backtrace: [ 401.511121] CPU: 21 PID: 7576 Comm: test-ecmp-add-v Not tainted 5.3.0-rc3+ #589 [ 401.511124] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 401.511127] Call Trace: [ 401.511138] dump_stack+0x85/0xc0 [ 401.511146] ___might_sleep+0x100/0x180 [ 401.511154] __mutex_lock+0x5b/0x960 [ 401.511162] ? find_held_lock+0x2b/0x80 [ 401.511173] ? __tcf_get_next_chain+0x1d/0xb0 [ 401.511179] ? mark_held_locks+0x49/0x70 [ 401.511194] ? __tcf_get_next_chain+0x1d/0xb0 [ 401.511198] __tcf_get_next_chain+0x1d/0xb0 [ 401.511251] ? uplink_rep_async_event+0x70/0x70 [mlx5_core] [ 401.511261] tcf_block_playback_offloads+0x39/0x160 [ 401.511276] tcf_block_setup+0x1b0/0x240 [ 401.511312] ? mlx5e_rep_indr_setup_tc_cb+0xca/0x290 [mlx5_core] [ 401.511347] ? mlx5e_rep_indr_tc_block_unbind+0x50/0x50 [mlx5_core] [ 401.511359] tc_indr_block_get_and_ing_cmd+0x11b/0x1e0 [ 401.511404] ? mlx5e_rep_indr_tc_block_unbind+0x50/0x50 [mlx5_core] [ 401.511414] flow_block_ing_cmd+0x7e/0x130 [ 401.511453] ? mlx5e_rep_indr_tc_block_unbind+0x50/0x50 [mlx5_core] [ 401.511462] __flow_indr_block_cb_unregister+0x7f/0xf0 [ 401.511502] mlx5e_nic_rep_netdevice_event+0x75/0xb0 [mlx5_core] [ 401.511513] unregister_netdevice_notifier+0xe9/0x140 [ 401.511554] mlx5e_cleanup_rep_tx+0x6f/0xe0 [mlx5_core] [ 401.511597] mlx5e_detach_netdev+0x4b/0x60 [mlx5_core] [ 401.511637] mlx5e_vport_rep_unload+0x71/0xc0 [mlx5_core] [ 401.511679] esw_offloads_disable+0x5b/0x90 [mlx5_core] [ 401.511724] mlx5_eswitch_disable.cold+0xdf/0x176 [mlx5_core] [ 401.511759] mlx5_device_disable_sriov+0xab/0xb0 [mlx5_core] [ 401.511794] mlx5_core_sriov_configure+0xaf/0xd0 [mlx5_core] [ 401.511805] sriov_numvfs_store+0xf8/0x130 [ 401.511817] kernfs_fop_write+0x122/0x1b0 [ 401.511826] vfs_write+0xdb/0x1d0 [ 401.511835] ksys_write+0x65/0xe0 [ 401.511847] do_syscall_64+0x5c/0xb0 [ 401.511857] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 401.511862] RIP: 0033:0x7fad892d30f8 [ 401.511868] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 96 0d 00 8b 00 85 c0 75 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 60 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89 [ 401.511871] RSP: 002b:00007ffca2a9fad8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 401.511875] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fad892d30f8 [ 401.511878] RDX: 0000000000000002 RSI: 000055afeb072a90 RDI: 0000000000000001 [ 401.511881] RBP: 000055afeb072a90 R08: 00000000ffffffff R09: 000000000000000a [ 401.511884] R10: 000055afeb058710 R11: 0000000000000246 R12: 0000000000000002 [ 401.511887] R13: 00007fad893a8780 R14: 0000000000000002 R15: 00007fad893a3740 To fix the described incorrect RCU usage, convert block_ing_cb_list from RCU list to regular list and protect it with flow_indr_block_ing_cb_lock mutex in flow_block_ing_cmd(). Fixes: 1150ab0f1b33 ("flow_offload: support get multi-subsystem block") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller39-196/+429
Merge conflict of mlx5 resolved using instructions in merge commit 9566e650bf7fdf58384bb06df634f7531ca3a97e. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-19netfilter: nf_tables: map basechain priority to hardware priorityPablo Neira Ayuso2-3/+18
This patch adds initial support for offloading basechains using the priority range from 1 to 65535. This is restricting the netfilter priority range to 16-bit integer since this is what most drivers assume so far from tc. It should be possible to extend this range of supported priorities later on once drivers are updated to support for 32-bit integer priorities. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-19tipc: clean up skb list lock handling on send pathJon Maloy6-25/+26
The policy for handling the skb list locks on the send and receive paths is simple. - On the send path we never need to grab the lock on the 'xmitq' list when the destination is an exernal node. - On the receive path we always need to grab the lock on the 'inputq' list, irrespective of source node. However, when transmitting node local messages those will eventually end up on the receive path of a local socket, meaning that the argument 'xmitq' in tipc_node_xmit() will become the 'ínputq' argument in the function tipc_sk_rcv(). This has been handled by always initializing the spinlock of the 'xmitq' list at message creation, just in case it may end up on the receive path later, and despite knowing that the lock in most cases never will be used. This approach is inaccurate and confusing, and has also concealed the fact that the stated 'no lock grabbing' policy for the send path is violated in some cases. We now clean up this by never initializing the lock at message creation, instead doing this at the moment we find that the message actually will enter the receive path. At the same time we fix the four locations where we incorrectly access the spinlock on the send/error path. This patch also reverts commit d12cffe9329f ("tipc: ensure head->lock is initialised") which has now become redundant. CC: Eric Dumazet <edumazet@google.com> Reported-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17devlink: Add generic packet traps and groupsIdo Schimmel1-0/+12
Add generic packet traps and groups that can report dropped packets as well as exceptions such as TTL error. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17devlink: Add packet trap infrastructureIdo Schimmel2-5/+1064
Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17drop_monitor: Allow user to start monitoring hardware dropsIdo Schimmel1-3/+121
Drop monitor has start and stop commands, but so far these were only used to start and stop monitoring of software drops. Now that drop monitor can also monitor hardware drops, we should allow the user to control these as well. Do that by adding SW and HW flags to these commands. If no flag is specified, then only start / stop monitoring software drops. This is done in order to maintain backward-compatibility with existing user space applications. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17drop_monitor: Add support for summary alert mode for hardware dropsIdo Schimmel1-2/+193
In summary alert mode a notification is sent with a list of recent drop reasons and a count of how many packets were dropped due to this reason. To avoid expensive operations in the context in which packets are dropped, each CPU holds an array whose number of entries is the maximum number of drop reasons that can be encoded in the netlink notification. Each entry stores the drop reason and a count. When a packet is dropped the array is traversed and a new entry is created or the count of an existing entry is incremented. Later, in process context, the array is replaced with a newly allocated copy and the old array is encoded in a netlink notification. To avoid breaking user space, the notification includes the ancillary header, which is 'struct net_dm_alert_msg' with number of entries set to '0'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17drop_monitor: Add support for packet alert mode for hardware dropsIdo Schimmel1-4/+300
In a similar fashion to software drops, extend drop monitor to send netlink events when packets are dropped by the underlying hardware. The main difference is that instead of encoding the program counter (PC) from which kfree_skb() was called in the netlink message, we encode the hardware trap name. The two are mostly equivalent since they should both help the user understand why the packet was dropped. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17drop_monitor: Consider all monitoring states before performing configurationIdo Schimmel1-2/+7
The drop monitor configuration (e.g., alert mode) is global, but user will be able to enable monitoring of only software or hardware drops. Therefore, ensure that monitoring of both software and hardware drops are disabled before allowing drop monitor configuration to take place. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17drop_monitor: Add basic infrastructure for hardware dropsIdo Schimmel1-0/+28
Export a function that can be invoked in order to report packets that were dropped by the underlying hardware along with metadata. Subsequent patches will add support for the different alert modes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17drop_monitor: Initialize hardware per-CPU dataIdo Schimmel1-2/+23
Like software drops, hardware drops also need the same type of per-CPU data. Therefore, initialize it during module initialization and de-initialize it during module exit. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17drop_monitor: Move per-CPU data init/fini to separate functionsIdo Schimmel1-17/+36
Currently drop monitor only reports software drops to user space, but subsequent patches are going to add support for hardware drops. Like software drops, the per-CPU data of hardware drops needs to be initialized and de-initialized upon module initialization and exit. To avoid code duplication, break this code into separate functions, so that these could be re-used for hardware drops. No functional changes intended. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17Merge branch 'for-upstream' of ↵David S. Miller4-3/+40
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Johan Hedberg says: ==================== pull request: bluetooth 2019-08-17 Here's a set of Bluetooth fixes for the 5.3-rc series: - Multiple fixes for Qualcomm (btqca & hci_qca) drivers - Minimum encryption key size debugfs setting (this is required for Bluetooth Qualification) - Fix hidp_send_message() to have a meaningful return value ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17net: bridge: mdb: allow add/delete for host-joined groupsNikolay Aleksandrov3-30/+80
Currently this is needed only for user-space compatibility, so similar object adds/deletes as the dumped ones would succeed. Later it can be used for L2 mcast MAC add/delete. v3: fix compiler warning (DaveM) v2: don't send a notification when used from user-space, arm the group timer if no ports are left after host entry del Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17net: bridge: mdb: dump host-joined entries as wellNikolay Aleksandrov1-10/+31
Currently we dump only the port mdb entries but we can have host-joined entries on the bridge itself and they should be treated as normal temp mdbs, they're already notified: $ bridge monitor all [MDB]dev br0 port br0 grp ff02::8 temp The group will not be shown in the bridge mdb output, but it takes 1 slot and it's timing out. If it's only host-joined then the mdb show output can even be empty. After this patch we show the host-joined groups: $ bridge mdb show dev br0 port br0 grp ff02::8 temp Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17net: bridge: mdb: factor out mdb fillingNikolay Aleksandrov1-31/+37
We have to factor out the mdb fill portion in order to re-use it later for the bridge mdb entries. No functional changes intended. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 21:38:20 +0300