| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Mark groups which were deleted due to fast leave/EHT.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A block report can result in empty source and host sets for both include
and exclude groups so if there are no hosts left we can safely remove
the group. Pull the block group handling so it can cover both cases and
add a check if EHT requires the delete.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We should be able to handle host filter mode changing. For exclude mode
we must create a zero-src entry so the group will be kept even without
any S,G entries (non-zero source sets). That entry doesn't count to the
entry limit and can always be created, its timer is refreshed on new
exclude reports and if we change the host filter mode to include then it
gets removed and we rely only on the non-zero source sets.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is an optimization specifically for TO_INCLUDE which sends queries
for the older entries and thus lowers the S,G timers to LMQT. If we have
the following situation for a group in either include or exclude mode:
- host A was interested in srcs X and Y, but is timing out
- host B sends TO_INCLUDE src Z, the bridge lowers X and Y's timeouts
to LMQT
- host B sends BLOCK src Z after LMQT time has passed
=> since host B is the last host we can delete the group, but if we
still have host A's EHT entries for X and Y (i.e. if they weren't
lowered to LMQT previously) then we'll have to wait another LMQT
time before deleting the group, with this optimization we can
directly remove it regardless of the group mode as there are no more
interested hosts
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for IGMPv3/MLDv2 include and exclude EHT handling. Similar to
how the reports are processed we have 2 cases when the group is in include
or exclude mode, these are processed as follows:
- group include
- is_include: create missing entries
- to_include: flush existing entries and create a new set from the
report, obviously if the src set is empty then we delete the group
- group exclude
- is_exclude: create missing entries
- to_exclude: flush existing entries and create a new set from the
report, any empty source set entries are removed
If the group is in a different mode then we just flush all entries reported
by the host and we create a new set with the new mode entries created from
the report. If the report is include type, the source list is empty and
the group has empty sources' set then we remove it. Any source set entries
which are empty are removed as well. If the group is in exclude mode it
can exist without any S,G entries (allowing for all traffic to pass).
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for IGMPv3/MLDv2 allow/block EHT handling. Similar to how
the reports are processed we have 2 cases when the group is in include
or exclude mode, these are processed as follows:
- group include
- allow: create missing entries
- block: remove existing matching entries and remove the corresponding
S,G entries if there are no more set host entries, then possibly
delete the whole group if there are no more S,G entries
- group exclude
- allow
- host include: create missing entries
- host exclude: remove existing matching entries and remove the
corresponding S,G entries if there are no more set host entries
- block
- host include: remove existing matching entries and remove the
corresponding S,G entries if there are no more set host entries,
then possibly delete the whole group if there are no more S,G entries
- host exclude: create missing entries
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that we can delete set entries, we can use that to remove EHT hosts.
Since the group's host set entries exist only when there are related
source set entries we just have to flush all source set entries
joined by the host set entry and it will be automatically removed.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add EHT source set and set-entry create, delete and lookup functions.
These allow to manipulate source sets which contain their own host sets
with entries which joined that S,G. We're limiting the maximum number of
tracked S,G entries per host to PG_SRC_ENT_LIMIT (currently 32) which is
the current maximum of S,G entries for a group. There's a per-set timer
which will be used to destroy the whole set later.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add functions to create, destroy and lookup an EHT host. These are
per-host entries contained in the eht_host_tree in net_bridge_port_group
which are used to store a list of all sources (S,G) entries joined for that
group by each host, the host's current filter mode and total number of
joined entries.
No functional changes yet, these would be used in later patches.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add EHT structures for tracking hosts and sources per group. We keep one
set for each host which has all of the host's S,G entries, and one set for
each multicast source which has all hosts that have joined that S,G. For
each host, source entry we record the filter_mode and we keep an expiry
timer. There is also one global expiry timer per source set, it is
updated with each set entry update, it will be later used to lower the
set's timer instead of lowering each entry's timer separately.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need to preserve the srcs pointer since we'll be passing it for EHT
handling later.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prepare __grp_src_block_incl() for being able to cause a notification
due to changes. Currently it cannot happen, but EHT would change that
since we'll be deleting sources immediately. Make sure that if the pg is
deleted we don't return true as that would cause the caller to access
freed pg. This patch shouldn't cause any functional change.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need to pass the host address so later it can be used for explicit
host tracking. No functional change.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename src_size argument to addr_size in preparation for passing host
address as an argument to IGMPv3/MLDv2 functions.
No functional change.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On MPTCP-level ack reception, the packet scheduler
may select a subflow other then the current one.
Prior to this commit we rely on the workqueue to trigger
action on such subflow.
This changeset introduces an infrastructure that allows
any MPTCP subflow to schedule actions (MPTCP xmit) on
others subflows without resorting to (multiple) process
reschedule.
A dummy NAPI instance is used instead. When MPTCP needs to
trigger action an a different subflow, it enqueues the target
subflow on the NAPI backlog and schedule such instance as needed.
The dummy NAPI poll method walks the sockets backlog and tries
to acquire the (BH) socket lock on each of them. If the socket
is owned by the user space, the action will be completed by
the sock release cb, otherwise push is started.
This change leverages the delegated action infrastructure
to avoid invoking the MPTCP worker to spool the pending data,
when the packet scheduler picks a subflow other then the one
currently processing the incoming MPTCP-level ack.
Additionally we further refine the subflow selection
invoking the packet scheduler for each chunk of data
even inside __mptcp_subflow_push_pending().
v1 -> v2:
- fix possible UaF at shutdown time, resetting sock ops
after removing the ulp context
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Otherwise the packet scheduler policy will not be
enforced when pushing pending data at MPTCP-level
ack reception time.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current packet scheduler can enqueue up to sndbuf
data on each subflow. If the send buffer is large and
the subflows are not symmetric, this could lead to
suboptimal aggregate bandwidth utilization.
Limit the amount of queued data to the maximum send
window.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After commit 6e628cd3a8f7 ("mptcp: use mptcp release_cb for
delayed tasks"), MPTCP never sets the flag bit SOCK_NOSPACE
on its subflow. As a side effect, autotune never takes place,
as it happens inside tcp_new_space(), which in turn is called
only when the mentioned bit is set.
Let's sendmsg() set the subflows NOSPACE bit when looking for
more memory and use the subflow write_space callback to propagate
the snd buf update and wake-up the user-space.
Additionally, this allows dropping a bunch of duplicate code and
makes the SNDBUF_LIMITED chrono relevant again for MPTCP subflows.
Fixes: 6e628cd3a8f7 ("mptcp: use mptcp release_cb for delayed tasks")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, incoming subflows link to the parent socket,
while outgoing ones link to a per subflow socket. The latter
is not really needed, except at the initial connect() time and
for the first subflow.
Always graft the outgoing subflow to the parent socket and
free the unneeded ones early.
This allows some code cleanup, reduces the amount of memory
used and will simplify the next patch
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds TCP_NLA_TTL to SCM_TIMESTAMPING_OPT_STATS that exports
the time-to-live or hop limit of the latest incoming packet with
SCM_TSTAMP_ACK. The value exported may not be from the packet that acks
the sequence when incoming packets are aggregated. Exporting the
time-to-live or hop limit value of incoming packets helps to estimate
the hop count of the path of the flow that may change over time.
Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20210120204155.552275-1-ysseung@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull ceph fixes from Ilya Dryomov:
"A patch to zero out sensitive cryptographic data and two minor
cleanups prompted by the fact that a bunch of code was moved in this
cycle"
* tag 'ceph-for-5.11-rc5' of git://github.com/ceph/ceph-client:
libceph: fix "Boolean result is used in bitwise operation" warning
libceph, ceph: disambiguate ceph_connection_operations handlers
libceph: zero out session key and connection secret
|
|
devlink port function can be in active or inactive state.
Allow users to get and set port function's state.
When the port function it activated, its operational state may change
after a while when the device is created and driver binds to it.
Similarly on deactivation flow.
To clearly describe the state of the port function and its device's
operational state in the host system, define state and opstate
attributes.
Example of a PCI SF port which supports a port function:
$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev
$ devlink port show
pci/0000:06:00.0/65535: type eth netdev ens2f0np0 flavour physical port 0 splittable false
$ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88
pci/0000:08:00.0/32768: type eth netdev eth6 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
$ devlink port show pci/0000:06:00.0/32768
pci/0000:06:00.0/32768: type eth netdev ens2f0npf0sf88 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false
function:
hw_addr 00:00:00:00:88:88 state inactive opstate detached
$ devlink port function set pci/0000:06:00.0/32768 hw_addr 00:00:00:00:88:88 state active
$ devlink port show pci/0000:06:00.0/32768 -jp
{
"port": {
"pci/0000:06:00.0/32768": {
"type": "eth",
"netdev": "ens2f0npf0sf88",
"flavour": "pcisf",
"controller": 0,
"pfnum": 0,
"sfnum": 88,
"external": false,
"splittable": false,
"function": {
"hw_addr": "00:00:00:00:88:88",
"state": "active",
"opstate": "attached"
}
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Extended devlink interface for the user to add and delete a port.
Extend devlink to connect user requests to driver to add/delete
a port in the device.
Driver routines are invoked without holding devlink instance lock.
This enables driver to perform several devlink objects registration,
unregistration such as (port, health reporter, resource etc) by using
existing devlink APIs.
This also helps to uniformly use the code for port unregistration
during driver unload and during port deletion initiated by user.
Examples of add, show and delete commands:
$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev
$ devlink port show
pci/0000:06:00.0/65535: type eth netdev ens2f0np0 flavour physical port 0 splittable false
$ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88
pci/0000:06:00.0/32768: type eth netdev eth6 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
$ devlink port show pci/0000:06:00.0/32768
pci/0000:06:00.0/32768: type eth netdev eth6 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
$ udevadm test-builtin net_id /sys/class/net/eth6
Load module index
Parsed configuration file /usr/lib/systemd/network/99-default.link
Created link configuration context.
Using default interface naming scheme 'v245'.
ID_NET_NAMING_SCHEME=v245
ID_NET_NAME_PATH=enp6s0f0npf0sf88
ID_NET_NAME_SLOT=ens2f0npf0sf88
Unload module index
Unloaded link configuration context.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
A PCI sub-function (SF) represents a portion of the device similar
to PCI VF.
In an eswitch, PCI SF may have port which is normally represented
using a representor netdevice.
To have better visibility of eswitch port, its association with SF,
and its representor netdevice, introduce a PCI SF port flavour.
When devlink port flavour is PCI SF, fill up PCI SF attributes of the
port.
Extend port name creation using PCI PF and SF number scheme on best
effort basis, so that vendor drivers can skip defining their own
scheme.
This is done as cApfNSfM, where A, N and M are controller, PCI PF and
PCI SF number respectively.
This is similar to existing naming for PCI PF and PCI VF ports.
An example view of a PCI SF port:
$ devlink port show pci/0000:06:00.0/32768
pci/0000:06:00.0/32768: type eth netdev ens2f0npf0sf88 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false
function:
hw_addr 00:00:00:00:88:88 state active opstate attached
$ devlink port show pci/0000:06:00.0/32768 -jp
{
"port": {
"pci/0000:06:00.0/32768": {
"type": "eth",
"netdev": "ens2f0npf0sf88",
"flavour": "pcisf",
"controller": 0,
"pfnum": 0,
"sfnum": 88,
"splittable": false,
"function": {
"hw_addr": "00:00:00:00:88:88",
"state": "active",
"opstate": "attached"
}
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Prepare code to fill zero or more port function optional attributes.
Subsequent patch makes use of this to fill more port function
attributes.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
We used to not require anything in terms of registering netdevs
with cfg80211, using a netdev notifier instead. However, in the
next patch reducing RTNL locking, this causes big problems, and
the simplest way is to just require drivers to do things better.
Change the registration/unregistration semantics to require the
drivers to call cfg80211_(un)register_netdevice() when this is
happening due to a cfg80211 request, i.e. add_virtual_intf() or
del_virtual_intf() (or if it somehow has to happen in any other
cfg80211 callback).
Otherwise, in other contexts, drivers may continue to use the
normal netdev (un)registration functions as usual.
Internally, we still use the netdev notifier and track (by the
new wdev->registered bool) if the wdev had already been added
to cfg80211 or not.
Link: https://lore.kernel.org/r/20210122161942.cf2f4b65e4e9.Ida8234e50da13eb675b557bac52a713ad4eddf71@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
On lower data rates, the throughput calculation has a significant rounding
error, causing rates like 48M and 54M OFDM to share the same throughput
value with >= 90% success probablity.
This is because the result of the division (prob_avg * 1000) / nsecs
is really small (8 in this example).
Improve accuracy by moving over some zeroes, making better use of the full
range of u32 before the division.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210115120242.89616-10-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The shorter interval was leading to too many frames being used for probing
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210115120242.89616-9-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
- do not select rates faster than the max throughput rate if probability is lower
- reset previous rate before sorting again
This ensures that the max prob rate gets set to a more reliable rate
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210115120242.89616-8-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Always allow sampling of rates faster than the primary max throughput rate.
When the second max_tp_rate is higher than the first one, sample attempts were
previously skipped, potentially causing rate control to get stuck at a slightly
lower rate
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210115120242.89616-7-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the driver does not report A-MPDU length, estimate it based on the rate.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210115120242.89616-6-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The new noise filter has been the default for a while now with no reported
downside and significant improvement compared to the old code.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210115120242.89616-5-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Now that minstrel_ht supports legacy rates, it is no longer needed
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210115120242.89616-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The legacy minstrel code is essentially unmaintained and receives only very
little testing. In order to bring the significant algorithm improvements from
minstrel_ht to legacy clients, this patch adds support for OFDM rates to
minstrel_ht and removes the fallback to the legacy codepath.
This also makes it work much better on hardware with rate selection constraints,
e.g. mt76.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210115120242.89616-3-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
- move ack overhead out of rate duration table
- remove cck_supported, cck_supported_short
Preparation for adding OFDM legacy rates support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210115120242.89616-2-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Introduce aql_enable node in debugfs in order to enable/disable aql.
This is useful for debugging purpose.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/e7a934d5d84e4796c4f97ea5de4e66c824296b07.1610214851.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The current phyrate conversion does not include extended MCS and provides
incorrect rates. Add a flag for extended MCS in DMG and add corresponding
phyrate table for the correct conversions using base MCS in DMG specs.
Signed-off-by: Max Chen <mxchen@codeaurora.org>
Link: https://lore.kernel.org/r/1609977050-7089-2-git-send-email-mxchen@codeaurora.org
[reduce data size, make a single WARN]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Observed the warning in cfg80211_calculate_bitrate_vht() using an
11ac chip reporting MCS-11. Since devices reporting non-standard
MCS-9 is already supported add similar entries for MCS-10 and MCS-11.
Actually, the value of MCS-9@20MHz is slightly off so corrected that.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://lore.kernel.org/r/20210105105839.3795-1-arend.vanspriel@broadcom.com
[fix array size]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For VHT capbility, we do intersection of MCS and NSS for peers in
mac80211, to simplify drivers.
Add this for HE as well.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Link: https://lore.kernel.org/r/1609816120-9411-3-git-send-email-wgong@codeaurora.org
[reword commit message, style cleanups, fix endian annotations]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2021-01-21
1) Fix a rare panic on SMP systems when packet reordering
happens between anti replay check and update.
From Shmulik Ladkani.
2) Fix disable_xfrm sysctl when used on xfrm interfaces.
From Eyal Birger.
3) Fix a race in PF_KEY when the availability of crypto
algorithms is set. From Cong Wang.
4) Fix a return value override in the xfrm policy selftests.
From Po-Hsu Lin.
5) Fix an integer wraparound in xfrm_policy_addr_delta.
From Visa Hankala.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Fix wraparound in xfrm_policy_addr_delta()
selftests: xfrm: fix test return value override issue in xfrm_policy.sh
af_key: relax availability checks for skb size calculation
xfrm: fix disable_xfrm sysctl when used on xfrm interfaces
xfrm: Fix oops in xfrm_replay_advance_bmp
====================
Link: https://lore.kernel.org/r/20210121121558.621339-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This line dates back to 2013, but cppcheck complained because commit
2f713615ddd9 ("libceph: move msgr1 protocol implementation to its own
file") moved it. Add parenthesis to silence the warning.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
When it does not support 160MHz in HE phy capabilities information,
it should not treat the NSS number of 160MHz as a valid number,
otherwise the final NSS will be set to 0.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Link: https://lore.kernel.org/r/1609816120-9411-2-git-send-email-wgong@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Upon receiving CSA with 160MHz extended NSS BW from associated AP,
STA should set the HT operation_mode based on new_center_freq_seg1
because it is later used as ccfs2 in ieee80211_chandef_vht_oper().
Signed-off-by: Aviad Brikman <aviad.brikman@celeno.com>
Signed-off-by: Shay Bar <shay.bar@celeno.com>
Link: https://lore.kernel.org/r/20201222064714.24888-1-shay.bar@celeno.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This patch adds support for LDPC encoding to the radiotap tx parse
function. Piror to this change adding the LDPC flag to the radiotap
header did not encode frames with LDPC.
Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de>
Link: https://lore.kernel.org/r/20201219170710.11706-1-borgers@mi.fu-berlin.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This allows drivers to pass 802.3 frames to mac80211, with some restrictions:
- the skb must be passed with a valid sta
- fast-rx needs to be active for the sta
- monitor mode needs to be disabled
mac80211 will tell the driver when it is safe to enable rx decap offload for
a particular station.
In order to implement support, a driver must:
- call ieee80211_hw_set(hw, SUPPORTS_RX_DECAP_OFFLOAD)
- implement ops->sta_set_decap_offload
- mark 802.3 frames with RX_FLAG_8023
If it doesn't want to enable offload for some vif types, it can mask out
IEEE80211_OFFLOAD_DECAP_ENABLED in vif->offload_flags from within the
.add_interface or .update_vif_offload driver ops
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20201218184718.93650-6-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
A sorted flow list is only needed to drop packets in the biggest flow when
hitting the overmemory condition.
By scanning flows only when needed, we can avoid paying the cost of
maintaining the list under normal conditions
In order to avoid scanning lots of empty flows and touching too many cold
cache lines, a bitmap of flows with backlog is maintained
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20201218184718.93650-3-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Simplifies the code and prepares for a rework of scanning for flows on
overmemory drop.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20201218184718.93650-2-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into tty-next
Fixes both the "splice/sendfile to a tty" and "splice/sendfile from a
tty" regression from 5.10.
* 'tty-splice' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux:
tty: teach the n_tty ICANON case about the new "cookie continuations" too
tty: teach n_tty line discipline about the new "cookie continuations"
tty: clean up legacy leftovers from n_tty line discipline
tty: implement read_iter
tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer
tty: implement write_iter
|
|
This patch is to let it always do CRC checksum in sctp_gso_segment()
by removing CRC flag from the dev features in gre_gso_segment() for
SCTP over GRE, just as it does in Commit 527beb8ef9c0 ("udp: support
sctp over udp in skb_udp_tunnel_segment") for SCTP over UDP.
It could set csum/csum_start in GSO CB properly in sctp_gso_segment()
after that commit, so it would do checksum with gso_make_checksum()
in gre_gso_segment(), and Commit 622e32b7d4a6 ("net: gre: recompute
gre csum for sctp over gre tunnels") can be reverted now.
Note that when need_csum is false, we can still leave CRC checksum
of SCTP to HW by not clearing this CRC flag if it's supported, as
Jakub and Alex noticed.
v1->v2:
- improve the changelog.
- fix "rev xmas tree" in varibles declaration.
v2->v3:
- remove CRC flag from dev features only when need_csum is true.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/00439f24d5f69e2c6fa2beadc681d056c15c258f.1610772251.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In __skb_udp_tunnel_segment(), when it's a SCTP over VxLAN/GENEVE
packet and need_csum is false, which means the outer udp checksum
doesn't need to be computed, csum_start and csum_offset could be
used by the inner SCTP CRC CSUM for SCTP HW CRC offload.
So this patch is to not remove the CRC flag from dev features when
need_csum is false.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/1e81b700642498546eaa3f298e023fd7ad394f85.1610776757.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
