summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2021-01-26mac80211: pause TX while changing interface typeJohannes Berg2-0/+7
syzbot reported a crash that happened when changing the interface type around a lot, and while it might have been easy to fix just the symptom there, a little deeper investigation found that really the reason is that we allowed packets to be transmitted while in the middle of changing the interface type. Disallow TX by stopping the queues while changing the type. Fixes: 34d4bc4d41d2 ("mac80211: support runtime interface type changes") Reported-by: syzbot+d7a3b15976bf7de2238a@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20210122171115.b321f98f4d4f.I6997841933c17b093535c31d29355be3c0c39628@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-26wext: fix NULL-ptr-dereference with cfg80211's lack of commit()Johannes Berg1-2/+3
Since cfg80211 doesn't implement commit, we never really cared about that code there (and it's configured out w/o CONFIG_WIRELESS_EXT). After all, since it has no commit, it shouldn't return -EIWCOMMIT to indicate commit is needed. However, EIWCOMMIT is actually an alias for EINPROGRESS, which _can_ happen if e.g. we try to change the frequency but we're already in the process of connecting to some network, and drivers could return that value (or even cfg80211 itself might). This then causes us to crash because dev->wireless_handlers is NULL but we try to check dev->wireless_handlers->standard[0]. Fix this by also checking dev->wireless_handlers. Also simplify the code a little bit. Cc: stable@vger.kernel.org Reported-by: syzbot+444248c79e117bc99f46@syzkaller.appspotmail.com Reported-by: syzbot+8b2a88a09653d4084179@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20210121171621.2076e4a37d5a.I5d9c72220fe7bb133fb718751da0180a57ecba4e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-26cfg80211: avoid holding the RTNL when calling the driverJohannes Berg21-463/+725
Currently, _everything_ in cfg80211 holds the RTNL, and if you have a slow USB device (or a few) you can get some bad lock contention on that. Fix that by re-adding a mutex to each wiphy/rdev as we had at some point, so we have locking for the wireless_dev lists and all the other things in there, and also so that drivers still don't have to worry too much about it (they still won't get parallel calls for a single device). Then, we can restrict the RTNL to a few cases where we add or remove interfaces and really need the added protection. Some of the global list management still also uses the RTNL, since we need to have it anyway for netdev management, but we only hold the RTNL for very short periods of time here. Link: https://lore.kernel.org/r/20210122161942.81df9f5e047a.I4a8e1a60b18863ea8c5e6d3a0faeafb2d45b2f40@changeid Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> [marvell driver issues] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-26bridge: Use PTR_ERR_OR_ZERO instead if(IS_ERR(...)) + PTR_ERRJiapeng Zhong1-1/+1
coccicheck suggested using PTR_ERR_OR_ZERO() and looking at the code. Fix the following coccicheck warnings: ./net/bridge/br_multicast.c:1295:7-13: WARNING: PTR_ERR_OR_ZERO can be used. Reported-by: Abaci <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/1611542381-91178-1-git-send-email-abaci-bugfix@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26netfilter: flowtable: add hash offset field to tuplePablo Neira Ayuso1-3/+3
Add a placeholder field to calculate hash tuple offset. Similar to 2c407aca6497 ("netfilter: conntrack: avoid gcc-10 zero-length-bounds warning"). Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-01-26ipvs: add weighted random twos choice algorithmDarby Payne3-0/+151
Adds the random twos choice load-balancing algorithm. The algorithm will pick two random servers based on weights. Then select the server with the least amount of connections normalized by weight. The algorithm avoids the "herd behavior" problem. The algorithm comes from a paper by Michael Mitzenmacher available here http://www.eecs.harvard.edu/~michaelm/NEWWORK/postscripts/twosurvey.pdf Signed-off-by: Darby Payne <darby.payne@gmail.com> Acked-by: Julian Anastasov <ja@ssi.bg> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-01-26xsk: Fold xp_assign_dev and __xp_assign_devBjörn Töpel1-9/+3
Fold xp_assign_dev and __xp_assign_dev. The former directly calls the latter. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20210122105351.11751-3-bjorn.topel@gmail.com
2021-01-26xsk: Remove explicit_free parameter from __xsk_rcv()Björn Töpel1-16/+31
The explicit_free parameter of the __xsk_rcv() function was used to mark whether the call was via the generic XDP or the native XDP path. Instead of clutter the code with if-statements and "true/false" parameters which are hard to understand, simply move the explicit free to the __xsk_map_redirect() which is always called from the native XDP path. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20210122105351.11751-2-bjorn.topel@gmail.com
2021-01-26netfilter: ctnetlink: remove get_ct indirectionFlorian Westphal3-10/+15
Use nf_ct_get() directly, its a small inline helper without dependencies. Add CONFIG_NF_CONNTRACK guards to elide the relevant part when conntrack isn't available at all. v2: add ifdef guard around nf_ct_get call (kernel test robot) Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-01-25SUNRPC: Handle 0 length opaque XDR object data properlyDave Wysochanski1-3/+6
When handling an auth_gss downcall, it's possible to get 0-length opaque object for the acceptor. In the case of a 0-length XDR object, make sure simple_get_netobj() fills in dest->data = NULL, and does not continue to kmemdup() which will set dest->data = ZERO_SIZE_PTR for the acceptor. The trace event code can handle NULL but not ZERO_SIZE_PTR for a string, and so without this patch the rpcgss_context trace event will crash the kernel as follows: [ 162.887992] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 162.898693] #PF: supervisor read access in kernel mode [ 162.900830] #PF: error_code(0x0000) - not-present page [ 162.902940] PGD 0 P4D 0 [ 162.904027] Oops: 0000 [#1] SMP PTI [ 162.905493] CPU: 4 PID: 4321 Comm: rpc.gssd Kdump: loaded Not tainted 5.10.0 #133 [ 162.908548] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 162.910978] RIP: 0010:strlen+0x0/0x20 [ 162.912505] Code: 48 89 f9 74 09 48 83 c1 01 80 39 00 75 f7 31 d2 44 0f b6 04 16 44 88 04 11 48 83 c2 01 45 84 c0 75 ee c3 0f 1f 80 00 00 00 00 <80> 3f 00 74 10 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 31 [ 162.920101] RSP: 0018:ffffaec900c77d90 EFLAGS: 00010202 [ 162.922263] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000fffde697 [ 162.925158] RDX: 000000000000002f RSI: 0000000000000080 RDI: 0000000000000010 [ 162.928073] RBP: 0000000000000010 R08: 0000000000000e10 R09: 0000000000000000 [ 162.930976] R10: ffff8e698a590cb8 R11: 0000000000000001 R12: 0000000000000e10 [ 162.933883] R13: 00000000fffde697 R14: 000000010034d517 R15: 0000000000070028 [ 162.936777] FS: 00007f1e1eb93700(0000) GS:ffff8e6ab7d00000(0000) knlGS:0000000000000000 [ 162.940067] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 162.942417] CR2: 0000000000000010 CR3: 0000000104eba000 CR4: 00000000000406e0 [ 162.945300] Call Trace: [ 162.946428] trace_event_raw_event_rpcgss_context+0x84/0x140 [auth_rpcgss] [ 162.949308] ? __kmalloc_track_caller+0x35/0x5a0 [ 162.951224] ? gss_pipe_downcall+0x3a3/0x6a0 [auth_rpcgss] [ 162.953484] gss_pipe_downcall+0x585/0x6a0 [auth_rpcgss] [ 162.955953] rpc_pipe_write+0x58/0x70 [sunrpc] [ 162.957849] vfs_write+0xcb/0x2c0 [ 162.959264] ksys_write+0x68/0xe0 [ 162.960706] do_syscall_64+0x33/0x40 [ 162.962238] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 162.964346] RIP: 0033:0x7f1e1f1e57df Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-01-25SUNRPC: Move simple_get_bytes and simple_get_netobj into private headerDave Wysochanski3-58/+45
Remove duplicated helper functions to parse opaque XDR objects and place inside new file net/sunrpc/auth_gss/auth_gss_internal.h. In the new file carry the license and copyright from the source file net/sunrpc/auth_gss/auth_gss.c. Finally, update the comment inside include/linux/sunrpc/xdr.h since lockd is not the only user of struct xdr_netobj. Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-01-25Bluetooth: L2CAP: Try harder to accept device not knowing optionsBastien Nocera1-0/+1
The current implementation of L2CAP options negotiation will continue the negotiation when a device responds with L2CAP_CONF_UNACCEPT ("unaccepted options"), but not when the device replies with L2CAP_CONF_UNKNOWN ("unknown options"). Trying to continue the negotiation without ERTM support will allow Bluetooth-capable XBox One controllers (notably models 1708 and 1797) to connect. btmon before patch: > ACL Data RX: Handle 256 flags 0x02 dlen 16 #64 [hci0] 59.182702 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 64 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 23 #65 [hci0] 59.182744 L2CAP: Configure Request (0x04) ident 3 len 15 Destination CID: 64 Flags: 0x0000 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Basic (0x00) TX window size: 0 Max transmit: 0 Retransmission timeout: 0 Monitor timeout: 0 Maximum PDU size: 0 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #66 [hci0] 59.183948 L2CAP: Configure Request (0x04) ident 1 len 8 Destination CID: 64 Flags: 0x0000 Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1480 < ACL Data TX: Handle 256 flags 0x00 dlen 18 #67 [hci0] 59.183994 L2CAP: Configure Response (0x05) ident 1 len 10 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1480 > ACL Data RX: Handle 256 flags 0x02 dlen 15 #69 [hci0] 59.187676 L2CAP: Configure Response (0x05) ident 3 len 7 Source CID: 64 Flags: 0x0000 Result: Failure - unknown options (0x0003) 04 . < ACL Data TX: Handle 256 flags 0x00 dlen 12 #70 [hci0] 59.187722 L2CAP: Disconnection Request (0x06) ident 4 len 4 Destination CID: 64 Source CID: 64 > ACL Data RX: Handle 256 flags 0x02 dlen 12 #73 [hci0] 59.192714 L2CAP: Disconnection Response (0x07) ident 4 len 4 Destination CID: 64 Source CID: 64 btmon after patch: > ACL Data RX: Handle 256 flags 0x02 dlen 16 #248 [hci0] 103.502970 L2CAP: Connection Response (0x03) ident 5 len 8 Destination CID: 65 Source CID: 65 Result: Connection pending (0x0001) Status: No further information available (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 16 #249 [hci0] 103.504184 L2CAP: Connection Response (0x03) ident 5 len 8 Destination CID: 65 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 23 #250 [hci0] 103.504398 L2CAP: Configure Request (0x04) ident 6 len 15 Destination CID: 65 Flags: 0x0000 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Basic (0x00) TX window size: 0 Max transmit: 0 Retransmission timeout: 0 Monitor timeout: 0 Maximum PDU size: 0 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #251 [hci0] 103.505472 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 65 Flags: 0x0000 Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1480 < ACL Data TX: Handle 256 flags 0x00 dlen 18 #252 [hci0] 103.505689 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1480 > ACL Data RX: Handle 256 flags 0x02 dlen 15 #254 [hci0] 103.509165 L2CAP: Configure Response (0x05) ident 6 len 7 Source CID: 65 Flags: 0x0000 Result: Failure - unknown options (0x0003) 04 . < ACL Data TX: Handle 256 flags 0x00 dlen 12 #255 [hci0] 103.509426 L2CAP: Configure Request (0x04) ident 7 len 4 Destination CID: 65 Flags: 0x0000 < ACL Data TX: Handle 256 flags 0x00 dlen 12 #257 [hci0] 103.511870 L2CAP: Connection Request (0x02) ident 8 len 4 PSM: 1 (0x0001) Source CID: 66 > ACL Data RX: Handle 256 flags 0x02 dlen 14 #259 [hci0] 103.514121 L2CAP: Configure Response (0x05) ident 7 len 6 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Signed-off-by: Florian Dollinger <dollinger.florian@gmx.de> Co-developed-by: Florian Dollinger <dollinger.florian@gmx.de> Reviewed-by: Luiz Augusto Von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: L2CAP: Fix handling fragmented lengthLuiz Augusto von Dentz1-25/+93
Bluetooth Core Specification v5.2, Vol. 3, Part A, section 1.4, table 1.1: 'Start Fragments always either begin with the first octet of the Basic L2CAP header of a PDU or they have a length of zero (see [Vol 2] Part B, Section 6.6.2).' Apparently this was changed by the following errata: https://www.bluetooth.org/tse/errata_view.cfm?errata_id=10216 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: btusb: fix memory leak on suspend and resumeVamshi K Sthambamkadi1-1/+2
kmemleak report: unreferenced object 0xffff9b1127f00500 (size 208): comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 60 ed 05 11 9b ff ff 00 00 00 00 00 00 00 00 .`.............. backtrace: [<000000006ab3fd59>] kmem_cache_alloc_node+0x17a/0x480 [<0000000051a5f6f9>] __alloc_skb+0x5b/0x1d0 [<0000000037e2d252>] hci_prepare_cmd+0x32/0xc0 [bluetooth] [<0000000010b586d5>] hci_req_add_ev+0x84/0xe0 [bluetooth] [<00000000d2deb520>] hci_req_clear_event_filter+0x42/0x70 [bluetooth] [<00000000f864bd8c>] hci_req_prepare_suspend+0x84/0x470 [bluetooth] [<000000001deb2cc4>] hci_prepare_suspend+0x31/0x40 [bluetooth] [<000000002677dd79>] process_one_work+0x209/0x3b0 [<00000000aaa62b07>] worker_thread+0x34/0x400 [<00000000826d176c>] kthread+0x126/0x140 [<000000002305e558>] ret_from_fork+0x22/0x30 unreferenced object 0xffff9b1125c6ee00 (size 512): comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s) hex dump (first 32 bytes): 04 00 00 00 0d 00 00 00 05 0c 01 00 11 9b ff ff ................ 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ backtrace: [<000000009f07c0cc>] slab_post_alloc_hook+0x59/0x270 [<0000000049431dc2>] __kmalloc_node_track_caller+0x15f/0x330 [<00000000027a42f6>] __kmalloc_reserve.isra.70+0x31/0x90 [<00000000e8e3e76a>] __alloc_skb+0x87/0x1d0 [<0000000037e2d252>] hci_prepare_cmd+0x32/0xc0 [bluetooth] [<0000000010b586d5>] hci_req_add_ev+0x84/0xe0 [bluetooth] [<00000000d2deb520>] hci_req_clear_event_filter+0x42/0x70 [bluetooth] [<00000000f864bd8c>] hci_req_prepare_suspend+0x84/0x470 [bluetooth] [<000000001deb2cc4>] hci_prepare_suspend+0x31/0x40 [bluetooth] [<000000002677dd79>] process_one_work+0x209/0x3b0 [<00000000aaa62b07>] worker_thread+0x34/0x400 [<00000000826d176c>] kthread+0x126/0x140 [<000000002305e558>] ret_from_fork+0x22/0x30 unreferenced object 0xffff9b112b395788 (size 8): comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s) hex dump (first 8 bytes): 20 00 00 00 00 00 04 00 ....... backtrace: [<0000000052dc28d2>] kmem_cache_alloc_trace+0x15e/0x460 [<0000000046147591>] alloc_ctrl_urb+0x52/0xe0 [btusb] [<00000000a2ed3e9e>] btusb_send_frame+0x91/0x100 [btusb] [<000000001e66030e>] hci_send_frame+0x7e/0xf0 [bluetooth] [<00000000bf6b7269>] hci_cmd_work+0xc5/0x130 [bluetooth] [<000000002677dd79>] process_one_work+0x209/0x3b0 [<00000000aaa62b07>] worker_thread+0x34/0x400 [<00000000826d176c>] kthread+0x126/0x140 [<000000002305e558>] ret_from_fork+0x22/0x30 In pm sleep-resume context, while the btusb device rebinds, it enters hci_unregister_dev(), whilst there is a possibility of hdev receiving PM_POST_SUSPEND suspend_notifier event, leading to generation of msg frames. When hci_unregister_dev() completes, i.e. hdev context is destroyed/freed, those intermittently sent msg frames cause memory leak. BUG details: Below is stack trace of thread that enters hci_unregister_dev(), marks the hdev flag HCI_UNREGISTER to 1, and then goes onto to wait on notifier lock - refer unregister_pm_notifier(). hci_unregister_dev+0xa5/0x320 [bluetoot] btusb_disconnect+0x68/0x150 [btusb] usb_unbind_interface+0x77/0x250 ? kernfs_remove_by_name_ns+0x75/0xa0 device_release_driver_internal+0xfe/0x1 device_release_driver+0x12/0x20 bus_remove_device+0xe1/0x150 device_del+0x192/0x3e0 ? usb_remove_ep_devs+0x1f/0x30 usb_disable_device+0x92/0x1b0 usb_disconnect+0xc2/0x270 hub_event+0x9f6/0x15d0 ? rpm_idle+0x23/0x360 ? rpm_idle+0x26b/0x360 process_one_work+0x209/0x3b0 worker_thread+0x34/0x400 ? process_one_work+0x3b0/0x3b0 kthread+0x126/0x140 ? kthread_park+0x90/0x90 ret_from_fork+0x22/0x30 Below is stack trace of thread executing hci_suspend_notifier() which processes the PM_POST_SUSPEND event, while the unbinding thread is waiting on lock. hci_suspend_notifier.cold.39+0x5/0x2b [bluetooth] blocking_notifier_call_chain+0x69/0x90 pm_notifier_call_chain+0x1a/0x20 pm_suspend.cold.9+0x334/0x352 state_store+0x84/0xf0 kobj_attr_store+0x12/0x20 sysfs_kf_write+0x3b/0x40 kernfs_fop_write+0xda/0x1c0 vfs_write+0xbb/0x250 ksys_write+0x61/0xe0 __x64_sys_write+0x1a/0x20 do_syscall_64+0x37/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix hci_suspend_notifer(), not to act on events when flag HCI_UNREGISTER is set. Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: Put HCI device if inquiry procedure interruptsPan Bian1-2/+4
Jump to the label done to decrement the reference count of HCI device hdev on path that the Inquiry procedure is interrupted. Fixes: 3e13fa1e1fab ("Bluetooth: Fix hci_inquiry ioctl usage") Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: drop HCI device reference before returnPan Bian1-0/+1
Call hci_dev_put() to decrement reference count of HCI device hdev if fails to duplicate memory. Fixes: 0b26ab9dce74 ("Bluetooth: AMP: Handle Accept phylink command status evt") Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: disable advertisement filters during suspendHoward Chung3-5/+44
This adds logic to disable and reenable advertisement filters during suspend and resume. After this patch, we would only receive packets from devices in allow list during suspend. Signed-off-by: Howard Chung <howardchung@google.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: advmon offload MSFT interleave scanning integrationArchie Pusaka1-9/+11
When MSFT extension is supported, we don't have to interleave the scan as we could just do allowlist scan. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: advmon offload MSFT handle filter enablementArchie Pusaka2-0/+73
Implements the feature to disable/enable the filter used for advertising monitor on MSFT controller, effectively have the same effect as "remove all monitors" and "add all previously removed monitors". This feature would be needed when suspending, where we would not want to get packets from anything outside the allowlist. Note that the integration with the suspending part is not included in this patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: advmon offload MSFT handle controller resetArchie Pusaka1-5/+71
When the controller is powered off, the registered advertising monitor is removed from the controller. This patch handles the re-registration of those monitors when the power is on. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: advmon offload MSFT remove monitorArchie Pusaka4-48/+317
Implements the monitor removal functionality for advertising monitor offloading to MSFT controllers. Supply handle = 0 to remove all monitors. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: advmon offload MSFT add monitorArchie Pusaka4-40/+342
Enables advertising monitor offloading to the controller, if MSFT extension is supported. The kernel won't adjust the monitor parameters to match what the controller supports - that is the user space's responsibility. This patch only manages the addition of monitors. Monitor removal is going to be handled by another patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: advmon offload MSFT add rssi supportArchie Pusaka1-72/+153
MSFT needs rssi parameter for monitoring advertisement packet, therefore we should supply them from mgmt. This adds a new opcode to add advertisement monitor with rssi parameters. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25SUNRPC: Correct a commentChuck Lever1-1/+1
Clean up: The rq_argpages field was removed from struct svc_rqst in the pre-git era. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2021-01-25svcrdma: DMA-sync the receive buffer in svc_rdma_recvfrom()Chuck Lever1-3/+3
The Receive completion handler doesn't look at the contents of the Receive buffer. The DMA sync isn't terribly expensive but it's one less thing that needs to be done by the Receive completion handler, which is single-threaded (per svc_xprt). This helps scalability. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-01-25svcrdma: Reduce Receive doorbell rateChuck Lever1-39/+43
This is similar to commit e340c2d6ef2a ("xprtrdma: Reduce the doorbell rate (Receive)") which added Receive batching to the client. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2021-01-25svcrdma: Deprecate stat variables that are no longer usedChuck Lever1-57/+27
Clean up. We are not permitted to remove old proc files. Instead, convert these variables to stubs that are only ever allowed to display a value of zero. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2021-01-25svcrdma: Restore read and write statsChuck Lever2-8/+20
Now that we have an efficient mechanism to update these two stats, let's start maintaining them again. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2021-01-25svcrdma: Convert rdma_stat_sq_starve to a per-CPU counterChuck Lever3-5/+11
Avoid the overhead of a memory bus lock cycle for counting a value that is hardly every used. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2021-01-25svcrdma: Convert rdma_stat_recv to a per-CPU counterChuck Lever2-6/+52
Receives are frequent events. Avoid the overhead of a memory bus lock cycle for counting a value that is hardly every used. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2021-01-25svcrdma: Refactor svc_rdma_init() and svc_rdma_clean_up()Chuck Lever1-7/+23
Setting up the proc variables is about to get more complicated. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2021-01-25Merge 5.11-rc5 into tty-nextGreg Kroah-Hartman82-389/+691
We need the fixes in here and this resolves a merge issue in drivers/tty/tty_io.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-24fs: make helpers idmap mount awareChristian Brauner1-2/+3
Extend some inode methods with an additional user namespace argument. A filesystem that is aware of idmapped mounts will receive the user namespace the mount has been marked with. This can be used for additional permission checking and also to enable filesystems to translate between uids and gids if they need to. We have implemented all relevant helpers in earlier patches. As requested we simply extend the exisiting inode method instead of introducing new ones. This is a little more code churn but it's mostly mechanical and doesnt't leave us with additional inode methods. Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24af_unix: handle idmapped mountsChristian Brauner1-2/+2
When binding a non-abstract AF_UNIX socket it will gain a representation in the filesystem. Enable the socket infrastructure to handle idmapped mounts by passing down the user namespace of the mount the socket will be created from. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-18-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Morris <jamorris@linux.microsoft.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24namei: prepare for idmapped mountsChristian Brauner1-1/+2
The various vfs_*() helpers are called by filesystems or by the vfs itself to perform core operations such as create, link, mkdir, mknod, rename, rmdir, tmpfile and unlink. Enable them to handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace and pass it down. Afterwards the checks and operations are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-15-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24acl: handle idmapped mountsChristian Brauner1-0/+1
The posix acl permission checking helpers determine whether a caller is privileged over an inode according to the acls associated with the inode. Add helpers that make it possible to handle acls on idmapped mounts. The vfs and the filesystems targeted by this first iteration make use of posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to translate basic posix access and default permissions such as the ACL_USER and ACL_GROUP type according to the initial user namespace (or the superblock's user namespace) to and from the caller's current user namespace. Adapt these two helpers to handle idmapped mounts whereby we either map from or into the mount's user namespace depending on in which direction we're translating. Similarly, cap_convert_nscap() is used by the vfs to translate user namespace and non-user namespace aware filesystem capabilities from the superblock's user namespace to the caller's user namespace. Enable it to handle idmapped mounts by accounting for the mount's user namespace. In addition the fileystems targeted in the first iteration of this patch series make use of the posix_acl_chmod() and, posix_acl_update_mode() helpers. Both helpers perform permission checks on the target inode. Let them handle idmapped mounts. These two helpers are called when posix acls are set by the respective filesystems to handle this case we extend the ->set() method to take an additional user namespace argument to pass the mount's user namespace down. Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24fs: add file and path permissions helpersChristian Brauner1-1/+1
Add two simple helpers to check permissions on a file and path respectively and convert over some callers. It simplifies quite a few codepaths and also reduces the churn in later patches quite a bit. Christoph also correctly points out that this makes codepaths (e.g. ioctls) way easier to follow that would otherwise have to do more complex argument passing than necessary. Link: https://lore.kernel.org/r/20210121131959.646623-4-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Morris <jamorris@linux.microsoft.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPENPengcheng Yang2-6/+9
Upon receiving a cumulative ACK that changes the congestion state from Disorder to Open, the TLP timer is not set. If the sender is app-limited, it can only wait for the RTO timer to expire and retransmit. The reason for this is that the TLP timer is set before the congestion state changes in tcp_ack(), so we delay the time point of calling tcp_set_xmit_timer() until after tcp_fastretrans_alert() returns and remove the FLAG_SET_XMIT_TIMER from ack_flag when the RACK reorder timer is set. This commit has two additional benefits: 1) Make sure to reset RTO according to RFC6298 when receiving ACK, to avoid spurious RTO caused by RTO timer early expires. 2) Reduce the xmit timer reschedule once per ACK when the RACK reorder timer is set. Fixes: df92c8394e6e ("tcp: fix xmit timer to only be reset if data ACKed/SACKed") Link: https://lore.kernel.org/netdev/1611311242-6675-1-git-send-email-yangpc@wangsu.com Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Cc: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/1611464834-23030-1-git-send-email-yangpc@wangsu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-24udp: allow forwarding of plain (non-fraglisted) UDP GRO packetsAlexander Lobakin1-1/+2
Commit 9fd1ff5d2ac7 ("udp: Support UDP fraglist GRO/GSO.") actually not only added a support for fraglisted UDP GRO, but also tweaked some logics the way that non-fraglisted UDP GRO started to work for forwarding too. Commit 2e4ef10f5850 ("net: add GSO UDP L4 and GSO fraglists to the list of software-backed types") added GSO UDP L4 to the list of software GSO to allow virtual netdevs to forward them as is up to the real drivers. Tests showed that currently forwarding and NATing of plain UDP GRO packets are performed fully correctly, regardless if the target netdevice has a support for hardware/driver GSO UDP L4 or not. Add the last element and allow to form plain UDP GRO packets if we are on forwarding path, and the new NETIF_F_GRO_UDP_FWD is enabled on a receiving netdevice. If both NETIF_F_GRO_FRAGLIST and NETIF_F_GRO_UDP_FWD are set, fraglisted GRO takes precedence. This keeps the current behaviour and is generally more optimal for now, as the number of NICs with hardware USO offload is relatively small. Signed-off-by: Alexander Lobakin <alobakin@pm.me> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-24net: introduce a netdev feature for UDP GRO forwardingAlexander Lobakin1-0/+1
Introduce a new netdev feature, NETIF_F_GRO_UDP_FWD, to allow user to turn UDP GRO on and off for forwarding. Defaults to off to not change current datapath. Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-24tcp: make TCP_USER_TIMEOUT accurate for zero window probesEnke Chen3-2/+22
The TCP_USER_TIMEOUT is checked by the 0-window probe timer. As the timer has backoff with a max interval of about two minutes, the actual timeout for TCP_USER_TIMEOUT can be off by up to two minutes. In this patch the TCP_USER_TIMEOUT is made more accurate by taking it into account when computing the timer value for the 0-window probes. This patch is similar to and builds on top of the one that made TCP_USER_TIMEOUT accurate for RTOs in commit b701a99e431d ("tcp: Add tcp_clamp_rto_to_user_timeout() helper to improve accuracy"). Fixes: 9721e709fa68 ("tcp: simplify window probe aborting on USER_TIMEOUT") Signed-off-by: Enke Chen <enchen@paloaltonetworks.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210122191306.GA99540@localhost.localdomain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-24NFC: fix resource leak when target index is invalidPan Bian1-1/+1
Goto to the label put_dev instead of the label error to fix potential resource leak on path that the target index is invalid. Fixes: c4fbb6515a4d ("NFC: The core part should generate the target index") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210121152748.98409-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-24NFC: fix possible resource leakPan Bian1-0/+1
Put the device to avoid resource leak on path that the polling flag is invalid. Fixes: a831b9132065 ("NFC: Do not return EBUSY when stopping a poll that's already stopped") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210121153745.122184-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23net: mrp: move struct definitions out of uapiRasmus Villemoes1-0/+29
None of these are actually used in the kernel/userspace interface - there's a userspace component of implementing MRP, and userspace will need to construct certain frames to put on the wire, but there's no reason the kernel should provide the relevant definitions in a UAPI header. In fact, some of those definitions were broken until previous commit, so only keep the few that are actually referenced in the kernel code, and move them to the br_private_mrp.h header. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23mlxsw: Register physical ports as a devlink resourceDanielle Ratson1-0/+4
The switch ASIC has a limited capacity of physical ('flavour physical' in devlink terminology) ports that it can support. While each system is brought up with a different number of ports, this number can be increased via splitting up to the ASIC's limit. Expose physical ports as a devlink resource so that user space will have visibility to the maximum number of ports that can be supported and the current occupancy. In addition, add a "Generic Resources" section in devlink-resource documentation so the different drivers will be aligned by the same resource name when exposing to user space. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23sch_htb: Stats for offloaded HTBMaxim Mikityanskiy1-0/+53
This commit adds support for statistics of offloaded HTB. Bytes and packets counters for leaf and inner nodes are supported, the values are taken from per-queue qdiscs, and the numbers that the user sees should have the same behavior as the software (non-offloaded) HTB. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23sch_htb: Hierarchical QoS hardware offloadMaxim Mikityanskiy1-28/+473
HTB doesn't scale well because of contention on a single lock, and it also consumes CPU. This patch adds support for offloading HTB to hardware that supports hierarchical rate limiting. In the offload mode, HTB passes control commands to the driver using ndo_setup_tc. The driver has to replicate the whole hierarchy of classes and their settings (rate, ceil) in the NIC. Every modification of the HTB tree caused by the admin results in ndo_setup_tc being called. After this setup, the HTB algorithm is done completely in the NIC. An SQ (send queue) is created for every leaf class and attached to the hierarchy, so that the NIC can calculate and obey aggregated rate limits, too. In the future, it can be changed, so that multiple SQs will back a single leaf class. ndo_select_queue is responsible for selecting the right queue that serves the traffic class of each packet. The data path works as follows: a packet is classified by clsact, the driver selects a hardware queue according to its class, and the packet is enqueued into this queue's qdisc. This solution addresses two main problems of scaling HTB: 1. Contention by flow classification. Currently the filters are attached to the HTB instance as follows: # tc filter add dev eth0 parent 1:0 protocol ip flower dst_port 80 classid 1:10 It's possible to move classification to clsact egress hook, which is thread-safe and lock-free: # tc filter add dev eth0 egress protocol ip flower dst_port 80 action skbedit priority 1:10 This way classification still happens in software, but the lock contention is eliminated, and it happens before selecting the TX queue, allowing the driver to translate the class to the corresponding hardware queue in ndo_select_queue. Note that this is already compatible with non-offloaded HTB and doesn't require changes to the kernel nor iproute2. 2. Contention by handling packets. HTB is not multi-queue, it attaches to a whole net device, and handling of all packets takes the same lock. When HTB is offloaded, it registers itself as a multi-queue qdisc, similarly to mq: HTB is attached to the netdev, and each queue has its own qdisc. Some features of HTB may be not supported by some particular hardware, for example, the maximum number of classes may be limited, the granularity of rate and ceil parameters may be different, etc. - so, the offload is not enabled by default, a new parameter is used to enable it: # tc qdisc replace dev eth0 root handle 1: htb offload Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23net: sched: Add extack to Qdisc_class_ops.deleteMaxim Mikityanskiy9-11/+20
In a following commit, sch_htb will start using extack in the delete class operation to pass hardware errors in offload mode. This commit prepares for that by adding the extack parameter to this callback and converting usage of the existing qdiscs. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23tcp: Add receive timestamp support for receive zerocopy.Arjun Roy1-32/+84
tcp_recvmsg() uses the CMSG mechanism to receive control information like packet receive timestamps. This patch adds CMSG fields to struct tcp_zerocopy_receive, and provides receive timestamps if available to the user. Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23tcp: Remove CMSG magic numbers for tcp_recvmsg().Arjun Roy1-4/+10
At present, tcp_recvmsg() uses flags to track if any CMSGs are pending and what those CMSGs are. These flags are currently magic numbers, used only within tcp_recvmsg(). To prepare for receive timestamp support in tcp receive zerocopy, gently refactor these magic numbers into enums. Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 19:43:35 +0300