summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2021-07-31ipv6: ip6_finish_output2: set sk into newly allocated nskbVasily Averin1-1/+1
[ Upstream commit 2d85a1b31dde84038ea07ad825c3d8d3e71f4344 ] skb_set_owner_w() should set sk not to old skb but to new nskb. Fixes: 5796015fa968 ("ipv6: allocate enough headroom in ip6_finish_output2()") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Link: https://lore.kernel.org/r/70c0744f-89ae-1869-7e3e-4fa292158f4b@virtuozzo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-31ipv6: allocate enough headroom in ip6_finish_output2()Vasily Averin1-0/+28
[ Upstream commit 5796015fa968a3349027a27dcd04c71d95c53ba5 ] When TEE target mirrors traffic to another interface, sk_buff may not have enough headroom to be processed correctly. ip_finish_output2() detect this situation for ipv4 and allocates new skb with enogh headroom. However ipv6 lacks this logic in ip_finish_output2 and it leads to skb_under_panic: skbuff: skb_under_panic: text:ffffffffc0866ad4 len:96 put:24 head:ffff97be85e31800 data:ffff97be85e317f8 tail:0x58 end:0xc0 dev:gre0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:110! invalid opcode: 0000 [#1] SMP PTI CPU: 2 PID: 393 Comm: kworker/2:2 Tainted: G OE 5.13.0 #13 Hardware name: Virtuozzo KVM, BIOS 1.11.0-2.vz7.4 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:skb_panic+0x48/0x4a Call Trace: skb_push.cold.111+0x10/0x10 ipgre_header+0x24/0xf0 [ip_gre] neigh_connected_output+0xae/0xf0 ip6_finish_output2+0x1a8/0x5a0 ip6_output+0x5c/0x110 nf_dup_ipv6+0x158/0x1000 [nf_dup_ipv6] tee_tg6+0x2e/0x40 [xt_TEE] ip6t_do_table+0x294/0x470 [ip6_tables] nf_hook_slow+0x44/0xc0 nf_hook.constprop.34+0x72/0xe0 ndisc_send_skb+0x20d/0x2e0 ndisc_send_ns+0xd1/0x210 addrconf_dad_work+0x3c8/0x540 process_one_work+0x1d1/0x370 worker_thread+0x30/0x390 kthread+0x116/0x130 ret_from_fork+0x22/0x30 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-31sctp: move 198 addresses from unusable to private scopeXin Long1-1/+2
[ Upstream commit 1d11fa231cabeae09a95cb3e4cf1d9dd34e00f08 ] The doc draft-stewart-tsvwg-sctp-ipv4-00 that restricts 198 addresses was never published. These addresses as private addresses should be allowed to use in SCTP. As Michael Tuexen suggested, this patch is to move 198 addresses from unusable to private scope. Reported-by: Sérgio <surkamp@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-31net: annotate data race around sk_ll_usecEric Dumazet1-1/+1
[ Upstream commit 0dbffbb5335a1e3aa6855e4ee317e25e669dd302 ] sk_ll_usec is read locklessly from sk_can_busy_loop() while another thread can change its value in sock_setsockopt() This is correct but needs annotations. BUG: KCSAN: data-race in __skb_try_recv_datagram / sock_setsockopt write to 0xffff88814eb5f904 of 4 bytes by task 14011 on cpu 0: sock_setsockopt+0x1287/0x2090 net/core/sock.c:1175 __sys_setsockopt+0x14f/0x200 net/socket.c:2100 __do_sys_setsockopt net/socket.c:2115 [inline] __se_sys_setsockopt net/socket.c:2112 [inline] __x64_sys_setsockopt+0x62/0x70 net/socket.c:2112 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88814eb5f904 of 4 bytes by task 14001 on cpu 1: sk_can_busy_loop include/net/busy_poll.h:41 [inline] __skb_try_recv_datagram+0x14f/0x320 net/core/datagram.c:273 unix_dgram_recvmsg+0x14c/0x870 net/unix/af_unix.c:2101 unix_seqpacket_recvmsg+0x5a/0x70 net/unix/af_unix.c:2067 ____sys_recvmsg+0x15d/0x310 include/linux/uio.h:244 ___sys_recvmsg net/socket.c:2598 [inline] do_recvmmsg+0x35c/0x9f0 net/socket.c:2692 __sys_recvmmsg net/socket.c:2771 [inline] __do_sys_recvmmsg net/socket.c:2794 [inline] __se_sys_recvmmsg net/socket.c:2787 [inline] __x64_sys_recvmmsg+0xcf/0x150 net/socket.c:2787 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0x00000101 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 14001 Comm: syz-executor.3 Not tainted 5.13.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-31net/802/garp: fix memleak in garp_request_join()Yang Yingliang1-0/+14
[ Upstream commit 42ca63f980842918560b25f0244307fd83b4777c ] I got kmemleak report when doing fuzz test: BUG: memory leak unreferenced object 0xffff88810c909b80 (size 64): comm "syz", pid 957, jiffies 4295220394 (age 399.090s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 08 00 00 00 01 02 00 04 ................ backtrace: [<00000000ca1f2e2e>] garp_request_join+0x285/0x3d0 [<00000000bf153351>] vlan_gvrp_request_join+0x15b/0x190 [<0000000024005e72>] vlan_dev_open+0x706/0x980 [<00000000dc20c4d4>] __dev_open+0x2bb/0x460 [<0000000066573004>] __dev_change_flags+0x501/0x650 [<0000000035b42f83>] rtnl_configure_link+0xee/0x280 [<00000000a5e69de0>] __rtnl_newlink+0xed5/0x1550 [<00000000a5258f4a>] rtnl_newlink+0x66/0x90 [<00000000506568ee>] rtnetlink_rcv_msg+0x439/0xbd0 [<00000000b7eaeae1>] netlink_rcv_skb+0x14d/0x420 [<00000000c373ce66>] netlink_unicast+0x550/0x750 [<00000000ec74ce74>] netlink_sendmsg+0x88b/0xda0 [<00000000381ff246>] sock_sendmsg+0xc9/0x120 [<000000008f6a2db3>] ____sys_sendmsg+0x6e8/0x820 [<000000008d9c1735>] ___sys_sendmsg+0x145/0x1c0 [<00000000aa39dd8b>] __sys_sendmsg+0xfe/0x1d0 Calling garp_request_leave() after garp_request_join(), the attr->state is set to GARP_APPLICANT_VO, garp_attr_destroy() won't be called in last transmit event in garp_uninit_applicant(), the attr of applicant will be leaked. To fix this leak, iterate and free each attr of applicant before rerturning from garp_uninit_applicant(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-31net/802/mrp: fix memleak in mrp_request_join()Yang Yingliang1-0/+14
[ Upstream commit 996af62167d0e0ec69b938a3561e96f84ffff1aa ] I got kmemleak report when doing fuzz test: BUG: memory leak unreferenced object 0xffff88810c239500 (size 64): comm "syz-executor940", pid 882, jiffies 4294712870 (age 14.631s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 01 00 00 00 01 02 00 04 ................ backtrace: [<00000000a323afa4>] slab_alloc_node mm/slub.c:2972 [inline] [<00000000a323afa4>] slab_alloc mm/slub.c:2980 [inline] [<00000000a323afa4>] __kmalloc+0x167/0x340 mm/slub.c:4130 [<000000005034ca11>] kmalloc include/linux/slab.h:595 [inline] [<000000005034ca11>] mrp_attr_create net/802/mrp.c:276 [inline] [<000000005034ca11>] mrp_request_join+0x265/0x550 net/802/mrp.c:530 [<00000000fcfd81f3>] vlan_mvrp_request_join+0x145/0x170 net/8021q/vlan_mvrp.c:40 [<000000009258546e>] vlan_dev_open+0x477/0x890 net/8021q/vlan_dev.c:292 [<0000000059acd82b>] __dev_open+0x281/0x410 net/core/dev.c:1609 [<000000004e6dc695>] __dev_change_flags+0x424/0x560 net/core/dev.c:8767 [<00000000471a09af>] rtnl_configure_link+0xd9/0x210 net/core/rtnetlink.c:3122 [<0000000037a4672b>] __rtnl_newlink+0xe08/0x13e0 net/core/rtnetlink.c:3448 [<000000008d5d0fda>] rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3488 [<000000004882fe39>] rtnetlink_rcv_msg+0x369/0xa10 net/core/rtnetlink.c:5552 [<00000000907e6c54>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504 [<00000000e7d7a8c4>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<00000000e7d7a8c4>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340 [<00000000e0645d50>] netlink_sendmsg+0x78e/0xc90 net/netlink/af_netlink.c:1929 [<00000000c24559b7>] sock_sendmsg_nosec net/socket.c:654 [inline] [<00000000c24559b7>] sock_sendmsg+0x139/0x170 net/socket.c:674 [<00000000fc210bc2>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350 [<00000000be4577b5>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404 Calling mrp_request_leave() after mrp_request_join(), the attr->state is set to MRP_APPLICANT_VO, mrp_attr_destroy() won't be called in last TX event in mrp_uninit_applicant(), the attr of applicant will be leaked. To fix this leak, iterate and free each attr of applicant before rerturning from mrp_uninit_applicant(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-31af_unix: fix garbage collect vs MSG_PEEKMiklos Szeredi1-2/+49
commit cbcf01128d0a92e131bd09f1688fe032480b65ca upstream. unix_gc() assumes that candidate sockets can never gain an external reference (i.e. be installed into an fd) while the unix_gc_lock is held. Except for MSG_PEEK this is guaranteed by modifying inflight count under the unix_gc_lock. MSG_PEEK does not touch any variable protected by unix_gc_lock (file count is not), yet it needs to be serialized with garbage collection. Do this by locking/unlocking unix_gc_lock: 1) increment file count 2) lock/unlock barrier to make sure incremented file count is visible to garbage collection 3) install file into fd This is a lock barrier (unlike smp_mb()) that ensures that garbage collection is run completely before or completely after the barrier. Cc: <stable@vger.kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28skbuff: Fix build with SKB extensions disabledFlorian Fainelli1-1/+2
commit 9615fe36b31d926f1c5107013b772dc226a6a7ca upstream. We will fail to build with CONFIG_SKB_EXTENSIONS disabled after 8550ff8d8c75 ("skbuff: Release nfct refcount on napi stolen or re-used skbs") since there is an unconditionally use of skb_ext_find() without an appropriate stub. Simply build the code conditionally and properly guard against both COFNIG_SKB_EXTENSIONS as well as CONFIG_NET_TC_SKB_EXT being disabled. Fixes: Fixes: 8550ff8d8c75 ("skbuff: Release nfct refcount on napi stolen or re-used skbs") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28skbuff: Release nfct refcount on napi stolen or re-used skbsPaul Blakey2-0/+14
commit 8550ff8d8c75416e984d9c4b082845e57e560984 upstream. When multiple SKBs are merged to a new skb under napi GRO, or SKB is re-used by napi, if nfct was set for them in the driver, it will not be released while freeing their stolen head state or on re-use. Release nfct on napi's stolen or re-used SKBs, and in gro_list_prepare, check conntrack metadata diff. Fixes: 5c6b94604744 ("net/mlx5e: CT: Handle misses after executing CT action") Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28mptcp: fix 'masking a bool' warningMatthieu Baerts1-1/+1
commit c4512c63b1193c73b3f09c598a6d0a7f88da1dd8 upstream. Dan Carpenter reported an issue introduced in commit fde56eea01f9 ("mptcp: refine mptcp_cleanup_rbuf") where a new boolean (ack_pending) is masked with 0x9. This is not the intention to ignore values by using a boolean. This variable should not have a 'bool' type: we should keep the 'u8' to allow this comparison. Fixes: fde56eea01f9 ("mptcp: refine mptcp_cleanup_rbuf") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28net: sched: cls_api: Fix the the wrong parameterYajun Deng1-1/+1
[ Upstream commit 9d85a6f44bd5585761947f40f7821c9cd78a1bbe ] The 4th parameter in tc_chain_notify() should be flags rather than seq. Let's change it back correctly. Fixes: 32a4f5ecd738 ("net: sched: introduce chain object to uapi") Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28tcp: disable TFO blackhole logic by defaultWei Wang2-2/+9
[ Upstream commit 213ad73d06073b197a02476db3a4998e219ddb06 ] Multiple complaints have been raised from the TFO users on the internet stating that the TFO blackhole logic is too aggressive and gets falsely triggered too often. (e.g. https://blog.apnic.net/2021/07/05/tcp-fast-open-not-so-fast/) Considering that most middleboxes no longer drop TFO packets, we decide to disable the blackhole logic by setting /proc/sys/net/ipv4/tcp_fastopen_blackhole_timeout_set to 0 by default. Fixes: cf1ef3f0719b4 ("net/tcp_fastopen: Disable active side TFO in certain scenarios") Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28udp: check encap socket in __udp_lib_errVadim Fedorenko2-12/+38
[ Upstream commit 9bfce73c8921c92a9565562e6e7d458d37b7ce80 ] Commit d26796ae5894 ("udp: check udp sock encap_type in __udp_lib_err") added checks for encapsulated sockets but it broke cases when there is no implementation of encap_err_lookup for encapsulation, i.e. ESP in UDP encapsulation. Fix it by calling encap_err_lookup only if socket implements this method otherwise treat it as legal socket. Fixes: d26796ae5894 ("udp: check udp sock encap_type in __udp_lib_err") Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28sctp: update active_key for asoc when old key is being replacedXin Long1-0/+2
[ Upstream commit 58acd10092268831e49de279446c314727101292 ] syzbot reported a call trace: BUG: KASAN: use-after-free in sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112 Call Trace: sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112 sctp_set_owner_w net/sctp/socket.c:131 [inline] sctp_sendmsg_to_asoc+0x152e/0x2180 net/sctp/socket.c:1865 sctp_sendmsg+0x103b/0x1d30 net/sctp/socket.c:2027 inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:821 sock_sendmsg_nosec net/socket.c:703 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:723 This is an use-after-free issue caused by not updating asoc->shkey after it was replaced in the key list asoc->endpoint_shared_keys, and the old key was freed. This patch is to fix by also updating active_key for asoc when old key is being replaced with a new one. Note that this issue doesn't exist in sctp_auth_del_key_id(), as it's not allowed to delete the active_key from the asoc. Fixes: 1b1e0bc99474 ("sctp: add refcnt support for sh_key") Reported-by: syzbot+b774577370208727d12b@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28ipv6: fix another slab-out-of-bounds in fib6_nh_flush_exceptionsPaolo Abeni1-1/+1
[ Upstream commit 8fb4792f091e608a0a1d353dfdf07ef55a719db5 ] While running the self-tests on a KASAN enabled kernel, I observed a slab-out-of-bounds splat very similar to the one reported in commit 821bbf79fe46 ("ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions"). We additionally need to take care of fib6_metrics initialization failure when the caller provides an nh. The fix is similar, explicitly free the route instead of calling fib6_info_release on a half-initialized object. Fixes: f88d8ea67fbdb ("ipv6: Plumb support for nexthop object in a fib6_info") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28net/sched: act_skbmod: Skip non-Ethernet packetsPeilin Ye1-4/+8
[ Upstream commit 727d6a8b7ef3d25080fad228b2c4a1d4da5999c6 ] Currently tcf_skbmod_act() assumes that packets use Ethernet as their L2 protocol, which is not always the case. As an example, for CAN devices: $ ip link add dev vcan0 type vcan $ ip link set up vcan0 $ tc qdisc add dev vcan0 root handle 1: htb $ tc filter add dev vcan0 parent 1: protocol ip prio 10 \ matchall action skbmod swap mac Doing the above silently corrupts all the packets. Do not perform skbmod actions for non-Ethernet packets. Fixes: 86da71b57383 ("net_sched: Introduce skbmod action") Reviewed-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28net/tcp_fastopen: fix data races around tfo_active_disable_stampEric Dumazet1-3/+16
[ Upstream commit 6f20c8adb1813467ea52c1296d52c4e95978cb2f ] tfo_active_disable_stamp is read and written locklessly. We need to annotate these accesses appropriately. Then, we need to perform the atomic_inc(tfo_active_disable_times) after the timestamp has been updated, and thus add barriers to make sure tcp_fastopen_active_should_disable() wont read a stale timestamp. Fixes: cf1ef3f0719b ("net/tcp_fastopen: Disable active side TFO in certain scenarios") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28netrom: Decrease sock refcount when sock timers expireNguyen Dinh Phi1-9/+11
[ Upstream commit 517a16b1a88bdb6b530f48d5d153478b2552d9a8 ] Commit 63346650c1a9 ("netrom: switch to sock timer API") switched to use sock timer API. It replaces mod_timer() by sk_reset_timer(), and del_timer() by sk_stop_timer(). Function sk_reset_timer() will increase the refcount of sock if it is called on an inactive timer, hence, in case the timer expires, we need to decrease the refcount ourselves in the handler, otherwise, the sock refcount will be unbalanced and the sock will never be freed. Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com> Reported-by: syzbot+10f1194569953b72f1ae@syzkaller.appspotmail.com Fixes: 63346650c1a9 ("netrom: switch to sock timer API") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28sctp: trim optlen when it's a huge value in sctp_setsockoptXin Long1-0/+4
[ Upstream commit 2f3fdd8d4805015fa964807e1c7f3d88f31bd389 ] After commit ca84bd058dae ("sctp: copy the optval from user space in sctp_setsockopt"), it does memory allocation in sctp_setsockopt with the optlen, and it would fail the allocation and return error if the optlen from user space is a huge value. This breaks some sockopts, like SCTP_HMAC_IDENT, SCTP_RESET_STREAMS and SCTP_AUTH_KEY, as when processing these sockopts before, optlen would be trimmed to a biggest value it needs when optlen is a huge value, instead of failing the allocation and returning error. This patch is to fix the allocation failure when it's a huge optlen from user space by trimming it to the biggest size sctp sockopt may need when necessary, and this biggest size is from sctp_setsockopt_reset_streams() for SCTP_RESET_STREAMS, which is bigger than those for SCTP_HMAC_IDENT and SCTP_AUTH_KEY. Fixes: ca84bd058dae ("sctp: copy the optval from user space in sctp_setsockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28net: sched: fix memory leak in tcindex_partial_destroy_workPavel Skripkin1-1/+4
[ Upstream commit f5051bcece50140abd1a11a2d36dc3ec5484fc32 ] Syzbot reported memory leak in tcindex_set_parms(). The problem was in non-freed perfect hash in tcindex_partial_destroy_work(). In tcindex_set_parms() new tcindex_data is allocated and some fields from old one are copied to new one, but not the perfect hash. Since tcindex_partial_destroy_work() is the destroy function for old tcindex_data, we need to free perfect hash to avoid memory leak. Reported-and-tested-by: syzbot+f0bbb2287b8993d4fa74@syzkaller.appspotmail.com Fixes: 331b72922c5f ("net: sched: RCU cls_tcindex") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28net: decnet: Fix sleeping inside in af_decnetYajun Deng1-15/+12
[ Upstream commit 5f119ba1d5771bbf46d57cff7417dcd84d3084ba ] The release_sock() is blocking function, it would change the state after sleeping. use wait_woken() instead. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28net: fix uninit-value in caif_seqpkt_sendmsgZiyang Xuan1-1/+2
[ Upstream commit 991e634360f2622a683b48dfe44fe6d9cb765a09 ] When nr_segs equal to zero in iovec_from_user, the object msg->msg_iter.iov is uninit stack memory in caif_seqpkt_sendmsg which is defined in ___sys_sendmsg. So we cann't just judge msg->msg_iter.iov->base directlly. We can use nr_segs to judge msg in caif_seqpkt_sendmsg whether has data buffers. ===================================================== BUG: KMSAN: uninit-value in caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2343 ___sys_sendmsg net/socket.c:2397 [inline] __sys_sendmmsg+0x808/0xc90 net/socket.c:2480 __compat_sys_sendmmsg net/compat.c:656 [inline] Reported-by: syzbot+09a5d591c1f98cf5efcb@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=1ace85e8fc9b0d5a45c08c2656c3e91762daa9b8 Fixes: bece7b2398d0 ("caif: Rewritten socket implementation") Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28bpf, sockmap, udp: sk_prot needs inuse_idx set for proc statsJakub Sitnicki1-1/+1
[ Upstream commit 54ea2f49fd9400dd698c25450be3352b5613b3b4 ] The proc socket stats use sk_prot->inuse_idx value to record inuse sock stats. We currently do not set this correctly from sockmap side. The result is reading sock stats '/proc/net/sockstat' gives incorrect values. The socket counter is incremented correctly, but because we don't set the counter correctly when we replace sk_prot we may omit the decrement. To get the correct inuse_idx value move the core_initcall that initializes the UDP proto handlers to late_initcall. This way it is initialized after UDP has the chance to assign the inuse_idx value from the register protocol handler. Fixes: edc6741cc660 ("bpf: Add sockmap hooks for UDP sockets") Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Cong Wang <cong.wang@bytedance.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20210714154750.528206-1-jakub@cloudflare.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28bpf, sockmap, tcp: sk_prot needs inuse_idx set for proc statsJohn Fastabend1-1/+1
[ Upstream commit 228a4a7ba8e99bb9ef980b62f71e3be33f4aae69 ] The proc socket stats use sk_prot->inuse_idx value to record inuse sock stats. We currently do not set this correctly from sockmap side. The result is reading sock stats '/proc/net/sockstat' gives incorrect values. The socket counter is incremented correctly, but because we don't set the counter correctly when we replace sk_prot we may omit the decrement. To get the correct inuse_idx value move the core_initcall that initializes the TCP proto handlers to late_initcall. This way it is initialized after TCP has the chance to assign the inuse_idx value from the register protocol handler. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Suggested-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Cong Wang <cong.wang@bytedance.com> Link: https://lore.kernel.org/bpf/20210712195546.423990-3-john.fastabend@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28bpf, sockmap: Fix potential memory leak on unlikely error caseJohn Fastabend1-5/+11
[ Upstream commit 7e6b27a69167f97c56b5437871d29e9722c3e470 ] If skb_linearize is needed and fails we could leak a msg on the error handling. To fix ensure we kfree the msg block before returning error. Found during code review. Fixes: 4363023d2668e ("bpf, sockmap: Avoid failures from skb_to_sgvec when skb has frag_list") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Cong Wang <cong.wang@bytedance.com> Link: https://lore.kernel.org/bpf/20210712195546.423990-2-john.fastabend@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28xdp, net: Fix use-after-free in bpf_xdp_link_releaseXuan Zhuo1-4/+10
[ Upstream commit 5acc7d3e8d342858405fbbc671221f676b547ce7 ] The problem occurs between dev_get_by_index() and dev_xdp_attach_link(). At this point, dev_xdp_uninstall() is called. Then xdp link will not be detached automatically when dev is released. But link->dev already points to dev, when xdp link is released, dev will still be accessed, but dev has been released. dev_get_by_index() | link->dev = dev | | rtnl_lock() | unregister_netdevice_many() | dev_xdp_uninstall() | rtnl_unlock() rtnl_lock(); | dev_xdp_attach_link() | rtnl_unlock(); | | netdev_run_todo() // dev released bpf_xdp_link_release() | /* access dev. | use-after-free */ | [ 45.966867] BUG: KASAN: use-after-free in bpf_xdp_link_release+0x3b8/0x3d0 [ 45.967619] Read of size 8 at addr ffff00000f9980c8 by task a.out/732 [ 45.968297] [ 45.968502] CPU: 1 PID: 732 Comm: a.out Not tainted 5.13.0+ #22 [ 45.969222] Hardware name: linux,dummy-virt (DT) [ 45.969795] Call trace: [ 45.970106] dump_backtrace+0x0/0x4c8 [ 45.970564] show_stack+0x30/0x40 [ 45.970981] dump_stack_lvl+0x120/0x18c [ 45.971470] print_address_description.constprop.0+0x74/0x30c [ 45.972182] kasan_report+0x1e8/0x200 [ 45.972659] __asan_report_load8_noabort+0x2c/0x50 [ 45.973273] bpf_xdp_link_release+0x3b8/0x3d0 [ 45.973834] bpf_link_free+0xd0/0x188 [ 45.974315] bpf_link_put+0x1d0/0x218 [ 45.974790] bpf_link_release+0x3c/0x58 [ 45.975291] __fput+0x20c/0x7e8 [ 45.975706] ____fput+0x24/0x30 [ 45.976117] task_work_run+0x104/0x258 [ 45.976609] do_notify_resume+0x894/0xaf8 [ 45.977121] work_pending+0xc/0x328 [ 45.977575] [ 45.977775] The buggy address belongs to the page: [ 45.978369] page:fffffc00003e6600 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4f998 [ 45.979522] flags: 0x7fffe0000000000(node=0|zone=0|lastcpupid=0x3ffff) [ 45.980349] raw: 07fffe0000000000 fffffc00003e6708 ffff0000dac3c010 0000000000000000 [ 45.981309] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 45.982259] page dumped because: kasan: bad access detected [ 45.982948] [ 45.983153] Memory state around the buggy address: [ 45.983753] ffff00000f997f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 45.984645] ffff00000f998000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.985533] >ffff00000f998080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.986419] ^ [ 45.987112] ffff00000f998100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.988006] ffff00000f998180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.988895] ================================================================== [ 45.989773] Disabling lock debugging due to kernel taint [ 45.990552] Kernel panic - not syncing: panic_on_warn set ... [ 45.991166] CPU: 1 PID: 732 Comm: a.out Tainted: G B 5.13.0+ #22 [ 45.991929] Hardware name: linux,dummy-virt (DT) [ 45.992448] Call trace: [ 45.992753] dump_backtrace+0x0/0x4c8 [ 45.993208] show_stack+0x30/0x40 [ 45.993627] dump_stack_lvl+0x120/0x18c [ 45.994113] dump_stack+0x1c/0x34 [ 45.994530] panic+0x3a4/0x7d8 [ 45.994930] end_report+0x194/0x198 [ 45.995380] kasan_report+0x134/0x200 [ 45.995850] __asan_report_load8_noabort+0x2c/0x50 [ 45.996453] bpf_xdp_link_release+0x3b8/0x3d0 [ 45.997007] bpf_link_free+0xd0/0x188 [ 45.997474] bpf_link_put+0x1d0/0x218 [ 45.997942] bpf_link_release+0x3c/0x58 [ 45.998429] __fput+0x20c/0x7e8 [ 45.998833] ____fput+0x24/0x30 [ 45.999247] task_work_run+0x104/0x258 [ 45.999731] do_notify_resume+0x894/0xaf8 [ 46.000236] work_pending+0xc/0x328 [ 46.000697] SMP: stopping secondary CPUs [ 46.001226] Dumping ftrace buffer: [ 46.001663] (ftrace buffer empty) [ 46.002110] Kernel Offset: disabled [ 46.002545] CPU features: 0x00000001,23202c00 [ 46.003080] Memory Limit: none Fixes: aa8d3a716b59db6c ("bpf, xdp: Add bpf_link-based XDP attachment API") Reported-by: Abaci <abaci@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Dust Li <dust.li@linux.alibaba.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210710031635.41649-1-xuanzhuo@linux.alibaba.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28bpf, test: fix NULL pointer dereference on invalid expected_attach_typeXuan Zhuo1-0/+3
[ Upstream commit 5e21bb4e812566aef86fbb77c96a4ec0782286e4 ] These two types of XDP progs (BPF_XDP_DEVMAP, BPF_XDP_CPUMAP) will not be executed directly in the driver, therefore we should also not directly run them from here. To run in these two situations, there must be further preparations done, otherwise these may cause a kernel panic. For more details, see also dev_xdp_attach(). [ 46.982479] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 46.984295] #PF: supervisor read access in kernel mode [ 46.985777] #PF: error_code(0x0000) - not-present page [ 46.987227] PGD 800000010dca4067 P4D 800000010dca4067 PUD 10dca6067 PMD 0 [ 46.989201] Oops: 0000 [#1] SMP PTI [ 46.990304] CPU: 7 PID: 562 Comm: a.out Not tainted 5.13.0+ #44 [ 46.992001] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/24 [ 46.995113] RIP: 0010:___bpf_prog_run+0x17b/0x1710 [ 46.996586] Code: 49 03 14 cc e8 76 f6 fe ff e9 ad fe ff ff 0f b6 43 01 48 0f bf 4b 02 48 83 c3 08 89 c2 83 e0 0f c0 ea 04 02 [ 47.001562] RSP: 0018:ffffc900005afc58 EFLAGS: 00010246 [ 47.003115] RAX: 0000000000000000 RBX: ffffc9000023f068 RCX: 0000000000000000 [ 47.005163] RDX: 0000000000000000 RSI: 0000000000000079 RDI: ffffc900005afc98 [ 47.007135] RBP: 0000000000000000 R08: ffffc9000023f048 R09: c0000000ffffdfff [ 47.009171] R10: 0000000000000001 R11: ffffc900005afb40 R12: ffffc900005afc98 [ 47.011172] R13: 0000000000000001 R14: 0000000000000001 R15: ffffffff825258a8 [ 47.013244] FS: 00007f04a5207580(0000) GS:ffff88842fdc0000(0000) knlGS:0000000000000000 [ 47.015705] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 47.017475] CR2: 0000000000000000 CR3: 0000000100182005 CR4: 0000000000770ee0 [ 47.019558] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 47.021595] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 47.023574] PKRU: 55555554 [ 47.024571] Call Trace: [ 47.025424] __bpf_prog_run32+0x32/0x50 [ 47.026296] ? printk+0x53/0x6a [ 47.027066] ? ktime_get+0x39/0x90 [ 47.027895] bpf_test_run.cold.28+0x23/0x123 [ 47.028866] ? printk+0x53/0x6a [ 47.029630] bpf_prog_test_run_xdp+0x149/0x1d0 [ 47.030649] __sys_bpf+0x1305/0x23d0 [ 47.031482] __x64_sys_bpf+0x17/0x20 [ 47.032316] do_syscall_64+0x3a/0x80 [ 47.033165] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 47.034254] RIP: 0033:0x7f04a51364dd [ 47.035133] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 48 [ 47.038768] RSP: 002b:00007fff8f9fc518 EFLAGS: 00000213 ORIG_RAX: 0000000000000141 [ 47.040344] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f04a51364dd [ 47.041749] RDX: 0000000000000048 RSI: 0000000020002a80 RDI: 000000000000000a [ 47.043171] RBP: 00007fff8f9fc530 R08: 0000000002049300 R09: 0000000020000100 [ 47.044626] R10: 0000000000000004 R11: 0000000000000213 R12: 0000000000401070 [ 47.046088] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 47.047579] Modules linked in: [ 47.048318] CR2: 0000000000000000 [ 47.049120] ---[ end trace 7ad34443d5be719a ]--- [ 47.050273] RIP: 0010:___bpf_prog_run+0x17b/0x1710 [ 47.051343] Code: 49 03 14 cc e8 76 f6 fe ff e9 ad fe ff ff 0f b6 43 01 48 0f bf 4b 02 48 83 c3 08 89 c2 83 e0 0f c0 ea 04 02 [ 47.054943] RSP: 0018:ffffc900005afc58 EFLAGS: 00010246 [ 47.056068] RAX: 0000000000000000 RBX: ffffc9000023f068 RCX: 0000000000000000 [ 47.057522] RDX: 0000000000000000 RSI: 0000000000000079 RDI: ffffc900005afc98 [ 47.058961] RBP: 0000000000000000 R08: ffffc9000023f048 R09: c0000000ffffdfff [ 47.060390] R10: 0000000000000001 R11: ffffc900005afb40 R12: ffffc900005afc98 [ 47.061803] R13: 0000000000000001 R14: 0000000000000001 R15: ffffffff825258a8 [ 47.063249] FS: 00007f04a5207580(0000) GS:ffff88842fdc0000(0000) knlGS:0000000000000000 [ 47.065070] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 47.066307] CR2: 0000000000000000 CR3: 0000000100182005 CR4: 0000000000770ee0 [ 47.067747] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 47.069217] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 47.070652] PKRU: 55555554 [ 47.071318] Kernel panic - not syncing: Fatal exception [ 47.072854] Kernel Offset: disabled [ 47.073683] ---[ end Kernel panic - not syncing: Fatal exception ]--- Fixes: 9216477449f3 ("bpf: cpumap: Add the possibility to attach an eBPF program to cpumap") Fixes: fbee97feed9b ("bpf: Add support to attach bpf program to a devmap entry") Reported-by: Abaci <abaci@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Dust Li <dust.li@linux.alibaba.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: David Ahern <dsahern@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20210708080409.73525-1-xuanzhuo@linux.alibaba.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28mptcp: properly account bulk freed memoryPaolo Abeni4-6/+18
[ Upstream commit ce599c516386f09ca30848a1a4eb93d3fffbe187 ] After commit 879526030c8b ("mptcp: protect the rx path with the msk socket spinlock") the rmem currently used by a given msk is really sk_rmem_alloc - rmem_released. The safety check in mptcp_data_ready() does not take the above in due account, as a result legit incoming data is kept in subflow receive queue with no reason, delaying or blocking MPTCP-level ack generation. This change addresses the issue introducing a new helper to fetch the rmem memory and using it as needed. Additionally add a MIB counter for the exceptional event described above - the peer is misbehaving. Finally, introduce the required annotation when rmem_released is updated. Fixes: 879526030c8b ("mptcp: protect the rx path with the msk socket spinlock") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/211 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28mptcp: refine mptcp_cleanup_rbufPaolo Abeni2-34/+23
[ Upstream commit fde56eea01f96b664eb63033990be0fd2a945da5 ] The current cleanup rbuf tries a bit too hard to avoid acquiring the subflow socket lock. We may end-up delaying the needed ack, or skip acking a blocked subflow. Address the above extending the conditions used to trigger the cleanup to reflect more closely what TCP does and invoking tcp_cleanup_rbuf() on all the active subflows. Note that we can't replicate the exact tests implemented in tcp_cleanup_rbuf(), as MPTCP lacks some of the required info - e.g. ping-pong mode. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28mptcp: use fast lock for subflows when possiblePaolo Abeni2-10/+15
[ Upstream commit 75e908c33615999abe1f3a8429d25dea30d28e4e ] There are a bunch of callsite where the ssk socket lock is acquired using the full-blown version eligible for the fast variant. Let's move to the latter. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28mptcp: avoid processing packet if a subflow resetJianguo Wu2-10/+28
[ Upstream commit 6787b7e350d3552651a3422d3d8980fbc8d65368 ] If check_fully_established() causes a subflow reset, it should not continue to process the packet in tcp_data_queue(). Add a return value to mptcp_incoming_options(), and return false if a subflow has been reset, else return true. Then drop the packet in tcp_data_queue()/tcp_rcv_state_process() if mptcp_incoming_options() return false. Fixes: d582484726c4 ("mptcp: fix fallback for MP_JOIN subflows") Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28mptcp: add sk parameter for mptcp_get_optionsGeliang Tang3-8/+10
[ Upstream commit c863225b79426459feca2ef5b0cc2f07e8e68771 ] This patch added a new parameter name sk in mptcp_get_options(). Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28mptcp: fix syncookie process if mptcp can not_accept new subflowJianguo Wu1-3/+3
[ Upstream commit 8547ea5f52dd8ef19b69c25c41b1415481b3503b ] Lots of "TCP: tcp_fin: Impossible, sk->sk_state=7" in client side when doing stress testing using wrk and webfsd. There are at least two cases may trigger this warning: 1.mptcp is in syncookie, and server recv MP_JOIN SYN request, in subflow_check_req(), the mptcp_can_accept_new_subflow() return false, so subflow_init_req_cookie_join_save() isn't called, i.e. not store the data present in the MP_JOIN syn request and the random nonce in hash table - join_entries[], but still send synack. When recv 3rd-ack, mptcp_token_join_cookie_init_state() will return false, and 3rd-ack is dropped, then if mptcp conn is closed by client, client will send a DATA_FIN and a MPTCP FIN, the DATA_FIN doesn't have MP_CAPABLE or MP_JOIN, so mptcp_subflow_init_cookie_req() will return 0, and pass the cookie check, MP_JOIN request is fallback to normal TCP. Server will send a TCP FIN if closed, in client side, when process TCP FIN, it will do reset, the code path is: tcp_data_queue()->mptcp_incoming_options() ->check_fully_established()->mptcp_subflow_reset(). mptcp_subflow_reset() will set sock state to TCP_CLOSE, so tcp_fin will hit TCP_CLOSE, and print the warning. 2.mptcp is in syncookie, and server recv 3rd-ack, in mptcp_subflow_init_cookie_req(), mptcp_can_accept_new_subflow() return false, and subflow_req->mp_join is not set to 1, so in subflow_syn_recv_sock() will not reset the MP_JOIN subflow, but fallback to normal TCP, and then the same thing happens when server will send a TCP FIN if closed. For case1, subflow_check_req() return -EPERM, then tcp_conn_request() will drop MP_JOIN SYN. For case2, let subflow_syn_recv_sock() call mptcp_can_accept_new_subflow(), and do fatal fallback, send reset. Fixes: 9466a1ccebbe ("mptcp: enable JOIN requests even if cookies are in use") Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28mptcp: remove redundant req destruct in subflow_check_req()Jianguo Wu1-5/+0
[ Upstream commit 030d37bd1cd2443a1f21db47eb301899bfa45a2a ] In subflow_check_req(), if subflow sport is mismatch, will put msk, destroy token, and destruct req, then return -EPERM, which can be done by subflow_req_destructor() via: tcp_conn_request() |--__reqsk_free() |--subflow_req_destructor() So we should remove these redundant code, otherwise will call tcp_v4_reqsk_destructor() twice, and may double free inet_rsk(req)->ireq_opt. Fixes: 5bc56388c74f ("mptcp: add port number check for MP_JOIN") Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28mptcp: fix warning in __skb_flow_dissect() when do syn cookie for subflow joinJianguo Wu1-1/+15
[ Upstream commit 0c71929b5893e410e0efbe1bbeca6f19a5f19956 ] I did stress test with wrk[1] and webfsd[2] with the assistance of mptcp-tools[3]: Server side: ./use_mptcp.sh webfsd -4 -R /tmp/ -p 8099 Client side: ./use_mptcp.sh wrk -c 200 -d 30 -t 4 http://192.168.174.129:8099/ and got the following warning message: [ 55.552626] TCP: request_sock_subflow: Possible SYN flooding on port 8099. Sending cookies. Check SNMP counters. [ 55.553024] ------------[ cut here ]------------ [ 55.553027] WARNING: CPU: 0 PID: 10 at net/core/flow_dissector.c:984 __skb_flow_dissect+0x280/0x1650 ... [ 55.553117] CPU: 0 PID: 10 Comm: ksoftirqd/0 Not tainted 5.12.0+ #18 [ 55.553121] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020 [ 55.553124] RIP: 0010:__skb_flow_dissect+0x280/0x1650 ... [ 55.553133] RSP: 0018:ffffb79580087770 EFLAGS: 00010246 [ 55.553137] RAX: 0000000000000000 RBX: ffffffff8ddb58e0 RCX: ffffb79580087888 [ 55.553139] RDX: ffffffff8ddb58e0 RSI: ffff8f7e4652b600 RDI: 0000000000000000 [ 55.553141] RBP: ffffb79580087858 R08: 0000000000000000 R09: 0000000000000008 [ 55.553143] R10: 000000008c622965 R11: 00000000d3313a5b R12: ffff8f7e4652b600 [ 55.553146] R13: ffff8f7e465c9062 R14: 0000000000000000 R15: ffffb79580087888 [ 55.553149] FS: 0000000000000000(0000) GS:ffff8f7f75e00000(0000) knlGS:0000000000000000 [ 55.553152] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 55.553154] CR2: 00007f73d1d19000 CR3: 0000000135e10004 CR4: 00000000003706f0 [ 55.553160] Call Trace: [ 55.553166] ? __sha256_final+0x67/0xd0 [ 55.553173] ? sha256+0x7e/0xa0 [ 55.553177] __skb_get_hash+0x57/0x210 [ 55.553182] subflow_init_req_cookie_join_save+0xac/0xc0 [ 55.553189] subflow_check_req+0x474/0x550 [ 55.553195] ? ip_route_output_key_hash+0x67/0x90 [ 55.553200] ? xfrm_lookup_route+0x1d/0xa0 [ 55.553207] subflow_v4_route_req+0x8e/0xd0 [ 55.553212] tcp_conn_request+0x31e/0xab0 [ 55.553218] ? selinux_socket_sock_rcv_skb+0x116/0x210 [ 55.553224] ? tcp_rcv_state_process+0x179/0x6d0 [ 55.553229] tcp_rcv_state_process+0x179/0x6d0 [ 55.553235] tcp_v4_do_rcv+0xaf/0x220 [ 55.553239] tcp_v4_rcv+0xce4/0xd80 [ 55.553243] ? ip_route_input_rcu+0x246/0x260 [ 55.553248] ip_protocol_deliver_rcu+0x35/0x1b0 [ 55.553253] ip_local_deliver_finish+0x44/0x50 [ 55.553258] ip_local_deliver+0x6c/0x110 [ 55.553262] ? ip_rcv_finish_core.isra.19+0x5a/0x400 [ 55.553267] ip_rcv+0xd1/0xe0 ... After debugging, I found in __skb_flow_dissect(), skb->dev and skb->sk are both NULL, then net is NULL, and trigger WARN_ON_ONCE(!net), actually net is always NULL in this code path, as skb->dev is set to NULL in tcp_v4_rcv(), and skb->sk is never set. Code snippet in __skb_flow_dissect() that trigger warning: 975 if (skb) { 976 if (!net) { 977 if (skb->dev) 978 net = dev_net(skb->dev); 979 else if (skb->sk) 980 net = sock_net(skb->sk); 981 } 982 } 983 984 WARN_ON_ONCE(!net); So, using seq and transport header derived hash. [1] https://github.com/wg/wrk [2] https://github.com/ourway/webfsd [3] https://github.com/pabeni/mptcp-tools Fixes: 9466a1ccebbe ("mptcp: enable JOIN requests even if cookies are in use") Suggested-by: Paolo Abeni <pabeni@redhat.com> Suggested-by: Florian Westphal <fw@strlen.de> Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28ipv6: fix 'disable_policy' for fwd packetsNicolas Dichtel1-1/+3
[ Upstream commit ccd27f05ae7b8ebc40af5b004e94517a919aa862 ] The goal of commit df789fe75206 ("ipv6: Provide ipv6 version of "disable_policy" sysctl") was to have the disable_policy from ipv4 available on ipv6. However, it's not exactly the same mechanism. On IPv4, all packets coming from an interface, which has disable_policy set, bypass the policy check. For ipv6, this is done only for local packets, ie for packets destinated to an address configured on the incoming interface. Let's align ipv6 with ipv4 so that the 'disable_policy' sysctl has the same effect for both protocols. My first approach was to create a new kind of route cache entries, to be able to set DST_NOPOLICY without modifying routes. This would have added a lot of code. Because the local delivery path is already handled, I choose to focus on the forwarding path to minimize code churn. Fixes: df789fe75206 ("ipv6: Provide ipv6 version of "disable_policy" sysctl") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25udp: properly flush normal packet at GRO timePaolo Abeni1-2/+4
commit b43c8909be52f2baca8884f967b418a88424494a upstream. If an UDP packet enters the GRO engine but is not eligible for aggregation and is not targeting an UDP tunnel, udp_gro_receive() will not set the flush bit, and packet could delayed till the next napi flush. Fix the issue ensuring non GROed packets traverse skb_gro_flush_final(). Reported-and-tested-by: Matthias Treydte <mt@waldheinz.de> Fixes: 18f25dc39990 ("udp: skip L4 aggregation for UDP tunnel packets") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-25udp: annotate data races around unix_sk(sk)->gso_sizeEric Dumazet2-4/+4
commit 18a419bad63b7f68a1979e28459782518e7b6bbe upstream. Accesses to unix_sk(sk)->gso_size are lockless. Add READ_ONCE()/WRITE_ONCE() around them. BUG: KCSAN: data-race in udp_lib_setsockopt / udpv6_sendmsg write to 0xffff88812d78f47c of 2 bytes by task 10849 on cpu 1: udp_lib_setsockopt+0x3b3/0x710 net/ipv4/udp.c:2696 udpv6_setsockopt+0x63/0x90 net/ipv6/udp.c:1630 sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3265 __sys_setsockopt+0x18f/0x200 net/socket.c:2104 __do_sys_setsockopt net/socket.c:2115 [inline] __se_sys_setsockopt net/socket.c:2112 [inline] __x64_sys_setsockopt+0x62/0x70 net/socket.c:2112 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88812d78f47c of 2 bytes by task 10852 on cpu 0: udpv6_sendmsg+0x161/0x16b0 net/ipv6/udp.c:1299 inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:642 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2337 ___sys_sendmsg net/socket.c:2391 [inline] __sys_sendmmsg+0x315/0x4b0 net/socket.c:2477 __do_sys_sendmmsg net/socket.c:2506 [inline] __se_sys_sendmmsg net/socket.c:2503 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2503 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000 -> 0x0005 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 10852 Comm: syz-executor.0 Not tainted 5.13.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: bec1f6f69736 ("udp: generate gso with UDP_SEGMENT") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-25tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy pathTalal Ahmad1-0/+3
commit 358ed624207012f03318235017ac6fb41f8af592 upstream. sk_wmem_schedule makes sure that sk_forward_alloc has enough bytes for charging that is going to be done by sk_mem_charge. In the transmit zerocopy path, there is sk_mem_charge but there was no call to sk_wmem_schedule. This change adds that call. Without this call to sk_wmem_schedule, sk_forward_alloc can go negetive which is a bug because sk_forward_alloc is a per-socket space that has been forward charged so this can't be negative. Fixes: f214f915e7db ("tcp: enable MSG_ZEROCOPY") Signed-off-by: Talal Ahmad <talalahmad@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Wei Wang <weiwan@google.com> Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-25ipv6: tcp: drop silly ICMPv6 packet too big messagesEric Dumazet2-2/+18
commit c7bb4b89033b764eb07db4e060548a6311d801ee upstream. While TCP stack scales reasonably well, there is still one part that can be used to DDOS it. IPv6 Packet too big messages have to lookup/insert a new route, and if abused by attackers, can easily put hosts under high stress, with many cpus contending on a spinlock while one is stuck in fib6_run_gc() ip6_protocol_deliver_rcu() icmpv6_rcv() icmpv6_notify() tcp_v6_err() tcp_v6_mtu_reduced() inet6_csk_update_pmtu() ip6_rt_update_pmtu() __ip6_rt_update_pmtu() ip6_rt_cache_alloc() ip6_dst_alloc() dst_alloc() ip6_dst_gc() fib6_run_gc() spin_lock_bh() ... Some of our servers have been hit by malicious ICMPv6 packets trying to _increase_ the MTU/MSS of TCP flows. We believe these ICMPv6 packets are a result of a bug in one ISP stack, since they were blindly sent back for _every_ (small) packet sent to them. These packets are for one TCP flow: 09:24:36.266491 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 09:24:36.266509 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 09:24:36.316688 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 09:24:36.316704 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 09:24:36.608151 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 TCP stack can filter some silly requests : 1) MTU below IPV6_MIN_MTU can be filtered early in tcp_v6_err() 2) tcp_v6_mtu_reduced() can drop requests trying to increase current MSS. This tests happen before the IPv6 routing stack is entered, thus removing the potential contention and route exhaustion. Note that IPv6 stack was performing these checks, but too late (ie : after the route has been added, and after the potential garbage collect war) v2: fix typo caught by Martin, thanks ! v3: exports tcp_mtu_to_mss(), caught by David, thanks ! Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-25tcp: fix tcp_init_transfer() to not reset icsk_ca_initializedNguyen Dinh Phi1-1/+1
commit be5d1b61a2ad28c7e57fe8bfa277373e8ecffcdc upstream. This commit fixes a bug (found by syzkaller) that could cause spurious double-initializations for congestion control modules, which could cause memory leaks or other problems for congestion control modules (like CDG) that allocate memory in their init functions. The buggy scenario constructed by syzkaller was something like: (1) create a TCP socket (2) initiate a TFO connect via sendto() (3) while socket is in TCP_SYN_SENT, call setsockopt(TCP_CONGESTION), which calls: tcp_set_congestion_control() -> tcp_reinit_congestion_control() -> tcp_init_congestion_control() (4) receive ACK, connection is established, call tcp_init_transfer(), set icsk_ca_initialized=0 (without first calling cc->release()), call tcp_init_congestion_control() again. Note that in this sequence tcp_init_congestion_control() is called twice without a cc->release() call in between. Thus, for CC modules that allocate memory in their init() function, e.g, CDG, a memory leak may occur. The syzkaller tool managed to find a reproducer that triggered such a leak in CDG. The bug was introduced when that commit 8919a9b31eb4 ("tcp: Only init congestion control if not initialized already") introduced icsk_ca_initialized and set icsk_ca_initialized to 0 in tcp_init_transfer(), missing the possibility for a sequence like the one above, where a process could call setsockopt(TCP_CONGESTION) in state TCP_SYN_SENT (i.e. after the connect() or TFO open sendmsg()), which would call tcp_init_congestion_control(). It did not intend to reset any initialization that the user had already explicitly made; it just missed the possibility of that particular sequence (which syzkaller managed to find). Fixes: 8919a9b31eb4 ("tcp: Only init congestion control if not initialized already") Reported-by: syzbot+f1e24a0594d4e3a895d3@syzkaller.appspotmail.com Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com> Acked-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-25tcp: annotate data races around tp->mtu_infoEric Dumazet2-4/+4
commit 561022acb1ce62e50f7a8258687a21b84282a4cb upstream. While tp->mtu_info is read while socket is owned, the write sides happen from err handlers (tcp_v[46]_mtu_reduced) which only own the socket spinlock. Fixes: 563d34d05786 ("tcp: dont drop MTU reduction indications") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-25net: dsa: properly check for the bridge_leave methods in ↵Vladimir Oltean1-2/+2
dsa_switch_bridge_leave() commit bcb9928a155444dbd212473e60241ca0a7f641e1 upstream. This was not caught because there is no switch driver which implements the .port_bridge_join but not .port_bridge_leave method, but it should nonetheless be fixed, as in certain conditions (driver development) it might lead to NULL pointer dereference. Fixes: f66a6a69f97a ("net: dsa: permit cross-chip bridging between all trees in the system") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-25net: do not reuse skbuff allocated from skbuff_fclone_cache in the skb cacheAntoine Tenart1-0/+2
commit 28b34f01a73435a754956ebae826e728c03ffa38 upstream. Some socket buffers allocated in the fclone cache (in __alloc_skb) can end-up in the following path[1]: napi_skb_finish __kfree_skb_defer napi_skb_cache_put The issue is napi_skb_cache_put is not fclone friendly and will put those skbuff in the skb cache to be reused later, although this cache only expects skbuff allocated from skbuff_head_cache. When this happens the skbuff is eventually freed using the wrong origin cache, and we can see traces similar to: [ 1223.947534] cache_from_obj: Wrong slab cache. skbuff_head_cache but object is from skbuff_fclone_cache [ 1223.948895] WARNING: CPU: 3 PID: 0 at mm/slab.h:442 kmem_cache_free+0x251/0x3e0 [ 1223.950211] Modules linked in: [ 1223.950680] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.13.0+ #474 [ 1223.951587] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-3.fc34 04/01/2014 [ 1223.953060] RIP: 0010:kmem_cache_free+0x251/0x3e0 Leading sometimes to other memory related issues. Fix this by using __kfree_skb for fclone skbuff, similar to what is done the other place __kfree_skb_defer is called. [1] At least in setups using veth pairs and tunnels. Building a kernel with KASAN we can for example see packets allocated in sk_stream_alloc_skb hit the above path and later the issue arises when the skbuff is reused. Fixes: 9243adfc311a ("skbuff: queue NAPI_MERGED_FREE skbs into NAPI cache instead of freeing") Cc: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-25net: send SYNACK packet with accepted fwmarkAlexander Ovechkin1-1/+1
commit 43b90bfad34bcb81b8a5bc7dc650800f4be1787e upstream. commit e05a90ec9e16 ("net: reflect mark on tcp syn ack packets") fixed IPv4 only. This part is for the IPv6 side. Fixes: e05a90ec9e16 ("net: reflect mark on tcp syn ack packets") Signed-off-by: Alexander Ovechkin <ovov@yandex-team.ru> Acked-by: Dmitry Yakunin <zeil@yandex-team.ru> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-25net: ip_tunnel: fix mtu calculation for ETHER tunnel devicesHangbin Liu1-3/+15
commit 9992a078b1771da354ac1f9737e1e639b687caa2 upstream. Commit 28e104d00281 ("net: ip_tunnel: fix mtu calculation") removed dev->hard_header_len subtraction when calculate MTU for tunnel devices as there is an overhead for device that has header_ops. But there are ETHER tunnel devices, like gre_tap or erspan, which don't have header_ops but set dev->hard_header_len during setup. This makes pkts greater than (MTU - ETH_HLEN) could not be xmited. Fix it by subtracting the ETHER tunnel devices' dev->hard_header_len for MTU calculation. Fixes: 28e104d00281 ("net: ip_tunnel: fix mtu calculation") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-25net: bridge: sync fdb to new unicast-filtering portsWolfgang Bumiller1-1/+16
commit a019abd8022061b917da767cd1a66ed823724eab upstream. Since commit 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode.") bridges with `vlan_filtering 1` and only 1 auto-port don't set IFF_PROMISC for unicast-filtering-capable ports. Normally on port changes `br_manage_promisc` is called to update the promisc flags and unicast filters if necessary, but it cannot distinguish between *new* ports and ones losing their promisc flag, and new ports end up not receiving the MAC address list. Fix this by calling `br_fdb_sync_static` in `br_add_if` after the port promisc flags are updated and the unicast filter was supposed to have been filled. Fixes: 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode.") Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-25net/sched: act_ct: remove and free nf_table callbacksLouis Peens1-0/+11
commit 77ac5e40c44eb78333fbc38482d61fc2af7dda0a upstream. When cleaning up the nf_table in tcf_ct_flow_table_cleanup_work there is no guarantee that the callback list, added to by nf_flow_table_offload_add_cb, is empty. This means that it is possible that the flow_block_cb memory allocated will be lost. Fix this by iterating the list and freeing the flow_block_cb entries before freeing the nf_table entry (via freeing ct_ft). Fixes: 978703f42549 ("netfilter: flowtable: Add API for registering to flow table events") Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-25netfilter: nf_tables: Fix dereference of null pointer flowColin Ian King1-1/+2
commit 4ca041f919f13783b0b03894783deee00dbca19a upstream. In the case where chain->flags & NFT_CHAIN_HW_OFFLOAD is false then nft_flow_rule_create is not called and flow is NULL. The subsequent error handling execution via label err_destroy_flow_rule will lead to a null pointer dereference on flow when calling nft_flow_rule_destroy. Since the error path to err_destroy_flow_rule has to cater for null and non-null flows, only call nft_flow_rule_destroy if flow is non-null to fix this issue. Addresses-Coverity: ("Explicity null dereference") Fixes: 3c5e44622011 ("netfilter: nf_tables: memleak in hw offload abort path") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-25net/sched: act_ct: fix err check for nf_conntrack_confirmwenxu1-1/+2
commit 8955b90c3cdad199137809aac8ccbbb585355913 upstream. The confirm operation should be checked. If there are any failed, the packet should be dropped like in ovs and netfilter. Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct") Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-20 18:47:39 +0300