| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Currently rpcrdma_reps_destroy() assumes that, at transport
tear-down, the content of the rb_free_reps list is the same as the
content of the rb_all_reps list. Although that is usually true,
using the rb_all_reps list should be more reliable because of
the way it's managed. And, rpcrdma_reps_unmap() uses rb_all_reps;
these two functions should both traverse the "all" list.
Ensure that all rpcrdma_reps are always destroyed whether they are
on the rep free list or not.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Defer destruction of an rpcrdma_rep until transport tear-down to
preserve the rb_all_reps list while Receives flush.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Currently the Receive completion handler refreshes the Receive Queue
whenever a successful Receive completion occurs.
On disconnect, xprtrdma drains the Receive Queue. The first few
Receive completions after a disconnect are typically successful,
until the first flushed Receive.
This means the Receive completion handler continues to post more
Receive WRs after the drain sentinel has been posted. The late-
posted Receives flush after the drain sentinel has completed,
leading to a crash later in rpcrdma_xprt_disconnect().
To prevent this crash, xprtrdma has to ensure that the Receive
handler stops posting Receives before ib_drain_rq() posts its
drain sentinel.
Suggested-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Commit e340c2d6ef2a ("xprtrdma: Reduce the doorbell rate (Receive)")
increased the number of Receive WRs that are posted by the client,
but did not increase the size of the Receive Queue allocated during
transport set-up.
This is usually not an issue because RPCRDMA_BACKWARD_WRS is defined
as (32) when SUNRPC_BACKCHANNEL is defined. In cases where it isn't,
there is a real risk of Receive Queue wrapping.
Fixes: e340c2d6ef2a ("xprtrdma: Reduce the doorbell rate (Receive)")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Currently if a major timeout value is reached, but the minor value has
not been reached, an ETIMEOUT will not be sent back to the caller.
This can occur if the v4 server is not responding to requests and
retrans is configured larger than the default of two.
For example, A TCP mount with a configured timeout value of 50 and a
retransmission count of 3 to a v4 server which is not responding:
1. Initial value and increment set to 5s, maxval set to 20s, retries at 3
2. Major timeout is set to 20s, minor timeout set to 5s initially
3. xport_adjust_timeout() is called after 5s, retry with 10s timeout,
minor timeout is bumped to 10s
4. And again after another 10s, 15s total time with minor timeout set
to 15s
5. After 20s total time xport_adjust_timeout is called as major timeout is
reached, but skipped because the minor timeout is not reached
- After this time the cpu spins continually calling
xport_adjust_timeout() and returning 0 for 10 seconds.
As seen on perf sched:
39243.913182 [0005] mount.nfs[3794] 4607.938 0.017 9746.863
6. This continues until the 15s minor timeout condition is reached (in
this case for 10 seconds). After which the ETIMEOUT is processed
back to the caller, the cpu spinning stops, and normal operations
continue
Fixes: 7de62bc09fe6 ("SUNRPC dont update timeout value on connection reset")
Signed-off-by: Chris Dion <Christopher.Dion@dell.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
This tracepoint can crash when dereferencing snd_task because
when some transports connect, they put a cookie in that field
instead of a pointer to an rpc_task.
BUG: KASAN: use-after-free in trace_event_raw_event_xprt_writelock_event+0x141/0x18e [sunrpc]
Read of size 2 at addr ffff8881a83bd3a0 by task git/331872
CPU: 11 PID: 331872 Comm: git Tainted: G S 5.12.0-rc2-00007-g3ab6e585a7f9 #1453
Hardware name: Supermicro SYS-6028R-T/X10DRi, BIOS 1.1a 10/16/2015
Call Trace:
dump_stack+0x9c/0xcf
print_address_description.constprop.0+0x18/0x239
kasan_report+0x174/0x1b0
trace_event_raw_event_xprt_writelock_event+0x141/0x18e [sunrpc]
xprt_prepare_transmit+0x8e/0xc1 [sunrpc]
call_transmit+0x4d/0xc6 [sunrpc]
Fixes: 9ce07ae5eb1d ("SUNRPC: Replace dprintk() call site in xprt_prepare_transmit")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
A separate tracepoint can be left enabled all the time to capture
rare but important retransmission events. So for example:
kworker/u26:3-568 [009] 156.967933: xprt_retransmit: task:44093@5 xid=0xa25dbc79 nfsv3 WRITE ntrans=2
Or, for example, enable all nfs and nfs4 tracepoints, and set up a
trigger to disable tracing when xprt_retransmit fires to capture
everything that leads up to it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
I've hit some crashes that occur in the xprt_rdma_inject_disconnect
path. It appears that, for some provides, rdma_disconnect() can
take so long that the transport can disconnect and release its
hardware resources while rdma_disconnect() is still running,
resulting in a UAF in the provider.
The transport's fault injection method may depend on the stability
of transport data structures. That means it needs to be invoked
only from contexts that hold the transport write lock.
Fixes: 4a0682583988 ("SUNRPC: Transport fault injection")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
If the server sends CB_ calls on a connection that is not associated
with the backchannel, refuse to process the call and shut down the
connection. This avoids a NULL dereference crash in
xprt_complete_bc_request(). There's not much more we can do in this
situation unless we want to look into allowing all connections to be
associated with the fore and back channel.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Currently rpcbind client is created without setting rpc timeout (thus
using the default value). But if the rpc_task already has a customized
timeout in its tk_client field, it's also ignored.
Let's use the same timeout setting in rpc_task->tk_client->cl_timeout
for rpcbind connection.
Signed-off-by: Eryu Guan <eguan@linux.alibaba.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
When we have multiple RPC requests queued up, it makes sense to set the
TCP_CORK option while the transmit queue is non-empty.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Pull networking fixes from David Miller:
"Various fixes, all over:
1) Fix overflow in ptp_qoriq_adjfine(), from Yangbo Lu.
2) Always store the rx queue mapping in veth, from Maciej
Fijalkowski.
3) Don't allow vmlinux btf in map_create, from Alexei Starovoitov.
4) Fix memory leak in octeontx2-af from Colin Ian King.
5) Use kvalloc in bpf x86 JIT for storing jit'd addresses, from
Yonghong Song.
6) Fix tx ptp stats in mlx5, from Aya Levin.
7) Check correct ip version in tun decap, fropm Roi Dayan.
8) Fix rate calculation in mlx5 E-Switch code, from arav Pandit.
9) Work item memork leak in mlx5, from Shay Drory.
10) Fix ip6ip6 tunnel crash with bpf, from Daniel Borkmann.
11) Lack of preemptrion awareness in macvlan, from Eric Dumazet.
12) Fix data race in pxa168_eth, from Pavel Andrianov.
13) Range validate stab in red_check_params(), from Eric Dumazet.
14) Inherit vlan filtering setting properly in b53 driver, from
Florian Fainelli.
15) Fix rtnl locking in igc driver, from Sasha Neftin.
16) Pause handling fixes in igc driver, from Muhammad Husaini
Zulkifli.
17) Missing rtnl locking in e1000_reset_task, from Vitaly Lifshits.
18) Use after free in qlcnic, from Lv Yunlong.
19) fix crash in fritzpci mISDN, from Tong Zhang.
20) Premature rx buffer reuse in igb, from Li RongQing.
21) Missing termination of ip[a driver message handler arrays, from
Alex Elder.
22) Fix race between "x25_close" and "x25_xmit"/"x25_rx" in hdlc_x25
driver, from Xie He.
23) Use after free in c_can_pci_remove(), from Tong Zhang.
24) Uninitialized variable use in nl80211, from Jarod Wilson.
25) Off by one size calc in bpf verifier, from Piotr Krysiuk.
26) Use delayed work instead of deferrable for flowtable GC, from
Yinjun Zhang.
27) Fix infinite loop in NPC unmap of octeontx2 driver, from
Hariprasad Kelam.
28) Fix being unable to change MTU of dwmac-sun8i devices due to lack
of fifo sizes, from Corentin Labbe.
29) DMA use after free in r8169 with WoL, fom Heiner Kallweit.
30) Mismatched prototypes in isdn-capi, from Arnd Bergmann.
31) Fix psample UAPI breakage, from Ido Schimmel"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (171 commits)
psample: Fix user API breakage
math: Export mul_u64_u64_div_u64
ch_ktls: fix enum-conversion warning
octeontx2-af: Fix memory leak of object buf
ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation
net: bridge: don't notify switchdev for local FDB addresses
net/sched: act_ct: clear post_ct if doing ct_clear
net: dsa: don't assign an error value to tag_ops
isdn: capi: fix mismatched prototypes
net/mlx5: SF, do not use ecpu bit for vhca state processing
net/mlx5e: Fix division by 0 in mlx5e_select_queue
net/mlx5e: Fix error path for ethtool set-priv-flag
net/mlx5e: Offload tuple rewrite for non-CT flows
net/mlx5e: Allow to match on MPLS parameters only for MPLS over UDP
net/mlx5: Add back multicast stats for uplink representor
net: ipconfig: ic_dev can be NULL in ic_close_devs
MAINTAINERS: Combine "QLOGIC QLGE 10Gb ETHERNET DRIVER" sections into one
docs: networking: Fix a typo
r8169: fix DMA being used after buffer free if WoL is enabled
net: ipa: fix init header command validation
...
|
|
As explained in this discussion:
https://lore.kernel.org/netdev/20210117193009.io3nungdwuzmo5f7@skbuf/
the switchdev notifiers for FDB entries managed to have a zero-day bug.
The bridge would not say that this entry is local:
ip link add br0 type bridge
ip link set swp0 master br0
bridge fdb add dev swp0 00:01:02:03:04:05 master local
and the switchdev driver would be more than happy to offload it as a
normal static FDB entry. This is despite the fact that 'local' and
non-'local' entries have completely opposite directions: a local entry
is locally terminated and not forwarded, whereas a static entry is
forwarded and not locally terminated. So, for example, DSA would install
this entry on swp0 instead of installing it on the CPU port as it should.
There is an even sadder part, which is that the 'local' flag is implicit
if 'static' is not specified, meaning that this command produces the
same result of adding a 'local' entry:
bridge fdb add dev swp0 00:01:02:03:04:05 master
I've updated the man pages for 'bridge', and after reading it now, it
should be pretty clear to any user that the commands above were broken
and should have never resulted in the 00:01:02:03:04:05 address being
forwarded (this behavior is coherent with non-switchdev interfaces):
https://patchwork.kernel.org/project/netdevbpf/cover/20210211104502.2081443-1-olteanv@gmail.com/
If you're a user reading this and this is what you want, just use:
bridge fdb add dev swp0 00:01:02:03:04:05 master static
Because switchdev should have given drivers the means from day one to
classify FDB entries as local/non-local, but didn't, it means that all
drivers are currently broken. So we can just as well omit the switchdev
notifications for local FDB entries, which is exactly what this patch
does to close the bug in stable trees. For further development work
where drivers might want to trap the local FDB entries to the host, we
can add a 'bool is_local' to br_switchdev_fdb_call_notifiers(), and
selectively make drivers act upon that bit, while all the others ignore
those entries if the 'is_local' bit is set.
Fixes: 6b26b51b1d13 ("net: bridge: Add support for notifying devices about FDB add/del")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Invalid detection works with two distinct moments: act_ct tries to find
a conntrack entry and set post_ct true, indicating that that was
attempted. Then, when flow dissector tries to dissect CT info and no
entry is there, it knows that it was tried and no entry was found, and
synthesizes/sets
key->ct_state = TCA_FLOWER_KEY_CT_FLAGS_TRACKED |
TCA_FLOWER_KEY_CT_FLAGS_INVALID;
mimicing what OVS does.
OVS has this a bit more streamlined, as it recomputes the key after
trying to find a conntrack entry for it.
Issue here is, when we have 'tc action ct clear', it didn't clear
post_ct, causing a subsequent match on 'ct_state -trk' to fail, due to
the above. The fix, thus, is to clear it.
Reproducer rules:
tc filter add dev enp130s0f0np0_0 ingress prio 1 chain 0 \
protocol ip flower ip_proto tcp ct_state -trk \
action ct zone 1 pipe \
action goto chain 2
tc filter add dev enp130s0f0np0_0 ingress prio 1 chain 2 \
protocol ip flower \
action ct clear pipe \
action goto chain 4
tc filter add dev enp130s0f0np0_0 ingress prio 1 chain 4 \
protocol ip flower ct_state -trk \
action mirred egress redirect dev enp130s0f1np1_0
With the fix, the 3rd rule matches, like it does with OVS kernel
datapath.
Fixes: 7baf2429a1a9 ("net/sched: cls_flower add CT_FLAGS_INVALID flag support")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use a temporary variable to hold the return value from
dsa_tag_driver_get() instead of assigning it to dst->tag_ops. Leaving
an error value in dst->tag_ops can result in deferencing an invalid
pointer when a deferred switch configuration happens later.
Fixes: 357f203bb3b5 ("net: dsa: keep a copy of the tagging protocol in the DSA switch tree")
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ic_close_dev contains a generalization of the logic to not close a
network interface if it's the host port for a DSA switch. This logic is
disguised behind an iteration through the lowers of ic_dev in
ic_close_dev.
When no interface for ipconfig can be found, ic_dev is NULL, and
ic_close_dev:
- dereferences a NULL pointer when assigning selected_dev
- would attempt to search through the lower interfaces of a NULL
net_device pointer
So we should protect against that case.
The "lower_dev" iterator variable was shortened to "lower" in order to
keep the 80 character limit.
Fixes: f68cbaed67cb ("net: ipconfig: avoid use-after-free in ic_close_devs")
Fixes: 46acf7bdbc72 ("Revert "net: ipv4: handle DSA enabled master network devices"")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit d4eb538e1f48 ("can: isotp: TX-path: ensure that CAN frame flags are
initialized") ensured the TX flags to be properly set for outgoing CAN
frames.
In fact the root cause of the issue results from a missing initialization
of outgoing CAN frames created by isotp. This is no problem on the CAN bus
as the CAN driver only picks the correctly defined content from the struct
can(fd)_frame. But when the outgoing frames are monitored (e.g. with
candump) we potentially leak some bytes in the unused content of
struct can(fd)_frame.
Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20210319100619.10858-1-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
For AF_VSOCK, accept() currently returns sockets that are unlabelled.
Other socket families derive the child's SID from the SID of the parent
and the SID of the incoming packet. This is typically done as the
connected socket is placed in the queue that accept() removes from.
Reuse the existing 'security_sk_clone' hook to copy the SID from the
parent (server) socket to the child. There is no packet SID in this
case.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The sk's sk_route_caps is set in sctp_packet_config, and later it
only needs to change when traversing the transport_list in a loop,
as the dst might be changed in the tx path.
So move sk_route_caps check and set into sctp_outq_flush_transports
from sctp_packet_transmit. This also fixes a dst leak reported by
Chen Yi:
https://bugzilla.kernel.org/show_bug.cgi?id=212227
As calling sk_setup_caps() in sctp_packet_transmit may also set the
sk_route_caps for the ctrl sock in a netns. When the netns is being
deleted, the ctrl sock's releasing is later than dst dev's deleting,
which will cause this dev's deleting to hang and dmesg error occurs:
unregister_netdevice: waiting for xxx to become free. Usage count = 1
Reported-by: Chen Yi <yiche@redhat.com>
Fixes: bcd623d8e9fa ("sctp: call sk_setup_caps in sctp_packet_transmit instead")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Several patches to testore use of memory barriers instead of RCU to
ensure consistent access to ruleset, from Mark Tomlinson.
2) Fix dump of expectation via ctnetlink, from Florian Westphal.
3) GRE helper works for IPv6, from Ludovic Senecaux.
4) Set error on unsupported flowtable flags.
5) Use delayed instead of deferrable workqueue in the flowtable,
from Yinjun Zhang.
6) Fix spurious EEXIST in case of add-after-delete flowtable in
the same batch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
__dev_alloc_name(), when supplied with a name containing '%d',
will search for the first available device number to generate a
unique device name.
Since commit ff92741270bf8b6e78aa885f166b68c7a67ab13a ("net:
introduce name_node struct to be used in hashlist") network
devices may have alternate names. __dev_alloc_name() does take
these alternate names into account, possibly generating a name
that is already taken and failing with -ENFILE as a result.
This demonstrates the bug:
# rmmod dummy 2>/dev/null
# ip link property add dev lo altname dummy0
# modprobe dummy numdummies=1
modprobe: ERROR: could not insert 'dummy': Too many open files in system
Instead of creating a device named dummy1, modprobe fails.
Fix this by checking all the names in the d->name_node list, not just d->name.
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Fixes: ff92741270bf ("net: introduce name_node struct to be used in hashlist")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 6af1799aaf3f1bc8defedddfa00df3192445bbf3.
Commit 6af1799aaf3f ("ipv6: drop incoming packets having a v4mapped
source address") introduced an input check against v4mapped addresses.
Use of such addresses on the wire is indeed questionable and not
allowed on public Internet. As the commit pointed out
https://tools.ietf.org/html/draft-itojun-v6ops-v4mapped-harmful-02
lists potential issues.
Unfortunately there are applications which use v4mapped addresses,
and breaking them is a clear regression. For example v4mapped
addresses (or any semi-valid addresses, really) may be used
for uni-direction event streams or packet export.
Since the issue which sparked the addition of the check was with
TCP and request_socks in particular push the check down to TCPv6
and DCCP. This restores the ability to receive UDPv6 packets with
v4mapped address as the source.
Keep using the IPSTATS_MIB_INHDRERRORS statistic to minimize the
user-visible changes.
Fixes: 6af1799aaf3f ("ipv6: drop incoming packets having a v4mapped source address")
Reported-by: Sunyi Shao <sunyishao@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the flowtable has been previously removed in this batch, skip the
hook overlap checks. This fixes spurious EEXIST errors when removing and
adding the flowtable in the same batch.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Currently flowtable's GC work is initialized as deferrable, which
means GC cannot work on time when system is idle. So the hardware
offloaded flow may be deleted for timeout, since its used time is
not timely updated.
Resolve it by initializing the GC work as delayed work instead of
deferrable.
Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Honor flowtable flags from the control update path. Disallow disabling
to toggle hardware offload support though.
Fixes: 8bb69f3b2918 ("netfilter: nf_tables: add flowtable offload control plane")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Error was not set accordingly.
Fixes: 8bb69f3b2918 ("netfilter: nf_tables: add flowtable offload control plane")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This fix permits gre connections to be tracked within ip6tables rules
Signed-off-by: Ludovic Senecaux <linuxludo@free.fr>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Currently, napi_thread_wait() checks for NAPI_STATE_SCHED bit to
determine if the kthread owns this napi and could call napi->poll() on
it. However, if socket busy poll is enabled, it is possible that the
busy poll thread grabs this SCHED bit (after the previous napi->poll()
invokes napi_complete_done() and clears SCHED bit) and tries to poll
on the same napi. napi_disable() could grab the SCHED bit as well.
This patch tries to fix this race by adding a new bit
NAPI_STATE_SCHED_THREADED in napi->state. This bit gets set in
____napi_schedule() if the threaded mode is enabled, and gets cleared
in napi_complete_done(), and we only poll the napi in kthread if this
bit is set. This helps distinguish the ownership of the napi between
kthread and other scenarios and fixes the race issue.
Fixes: 29863d41bb6e ("net: implement threaded-able napi poll loop support")
Reported-by: Martin Zaharinov <micron10@gmail.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Wei Wang <weiwan@google.com>
Cc: Alexander Duyck <alexanderduyck@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was
implemented. We can safely remove it, because the kernel has grown
to have many more reliable mechanisms to determine if device is
supported or not.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
First round of fixes for 5.12-rc:
* HE (802.11ax) elements can be extended, handle that
* fix locking in network namespace changes that was
broken due to the RTNL-redux work
* various other small fixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ct_state validate should not only check the mask bit and also
check mask_bit & key_bit..
For the +new+est case example, The 'new' and 'est' bits should be
set in both state_mask and state flags. Or the -new-est case also
will be reject by kernel.
When Openvswitch with two flows
ct_state=+trk+new,action=commit,forward
ct_state=+trk+est,action=forward
A packet go through the kernel and the contrack state is invalid,
The ct_state will be +trk-inv. Upcall to the ovs-vswitchd, the
finally dp action will be drop with -new-est+trk.
Fixes: 1bcc51ac0731 ("net/sched: cls_flower: Reject invalid ct_state flags rules")
Fixes: 3aed8b63336c ("net/sched: cls_flower: validate ct_state for invalid and reply flags")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When openvswitch conntrack offload with act_ct action. The first rule
do conntrack in the act_ct in tc subsystem. And miss the next rule in
the tc and fallback to the ovs datapath but miss set post_ct flag
which will lead the ct_state_key with -trk flag.
Fixes: 7baf2429a1a9 ("net/sched: cls_flower add CT_FLAGS_INVALID flag support")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Build currently fails with -Werror=maybe-uninitialized set:
net/wireless/nl80211.c: In function '__cfg80211_wdev_from_attrs':
net/wireless/nl80211.c:124:44: error: 'wdev_id' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
Easy fix is to just initialize wdev_id to 0, since it's value doesn't
otherwise matter unless have_wdev_id is true.
Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver")
CC: Johannes Berg <johannes@sipsolutions.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jakub Kicinski <kuba@kernel.org>
CC: linux-wireless@vger.kernel.org
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Link: https://lore.kernel.org/r/20210312163651.1398207-1-jarod@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Even if the first channel from sband channel list is invalid
or disabled mac80211 ends up choosing it as the default channel
for monitor interfaces, making them not usable.
Fix this by assigning the first available valid or enabled
channel instead.
Signed-off-by: Karthikeyan Kathirvel <kathirve@codeaurora.org>
Link: https://lore.kernel.org/r/1615440547-7661-1-git-send-email-kathirve@codeaurora.org
[reword commit message, comment, code cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We have all the network interfaces marked as netns-local
since the only reasonable thing to do right now is to set
a whole device, including all netdevs, into a different
network namespace. For this reason, we also have our own
way of changing the network namespace.
Unfortunately, the RTNL locking changes broke this, and
it now results in many RTNL assertions. The trivial fix
for those (just hold RTNL for the changes) however leads
to deadlocks in the cfg80211 netdev notifier.
Since we only need the wiphy, and that's still protected
by the RTNL, add a new NL80211_FLAG_NO_WIPHY_MTX flag to
the nl80211 ops and use it to _not_ take the wiphy mutex
but only the RTNL. This way, the notifier does all the
work necessary during unregistration/registration of the
netdevs from the old and in the new namespace.
Reported-by: Sid Hayn <sidhayn@gmail.com>
Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20210310215839.eadf7c43781b.I5fc6cf6676f800ab8008e03bbea9c3349b02d804@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
crypto_aead_encrypt returns <0 on error, so if these calls are not checked,
execution may continue with failed encrypts. It also seems that these two
crypto_aead_encrypt calls are the only instances in the codebase that are
not checked for errors.
Signed-off-by: Daniel Phan <daniel.phan36@gmail.com>
Link: https://lore.kernel.org/r/20210309204137.823268-1-daniel.phan36@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We observed some Cisco APs sending the following HE Operation IE in
associate response:
ff 0a 24 f4 3f 00 01 fc ff 00 00 00
Its HE operation parameter is 0x003ff4, so the expected total length is
7 which does not match the actual length = 10. This causes association
failing with "HE AP is missing HE Capability/operation."
According to P802.11ax_D4 Table9-94, HE operation is extensible, and
according to 802.11-2016 10.27.8, STA should discard the part beyond
the maximum length and parse the truncated element.
Allow HE operation element to be longer than expected to handle this
case and future extensions.
Fixes: e4d005b80dee ("mac80211: refactor extended element parsing")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Yen-lin Lai <yenlinlai@chromium.org>
Link: https://lore.kernel.org/r/20210223051926.2653301-1-yenlinlai@chromium.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This probably came in through some refactoring and what is
now a call to minstrel_ht_group_min_rate_offset(), remove
the unused variable.
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210219105744.f2538a80f6cf.I3d53554c158d5b896ac07ea546bceac67372ec28@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Clear beacon ie pointer and ie length after free
in order to prevent double free.
==================================================================
BUG: KASAN: double-free or invalid-free \
in ieee80211_ibss_leave+0x83/0xe0 net/mac80211/ibss.c:1876
CPU: 0 PID: 8472 Comm: syz-executor100 Not tainted 5.11.0-rc6-syzkaller #0
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:120
print_address_description.constprop.0.cold+0x5b/0x2c6 mm/kasan/report.c:230
kasan_report_invalid_free+0x51/0x80 mm/kasan/report.c:355
____kasan_slab_free+0xcc/0xe0 mm/kasan/common.c:341
kasan_slab_free include/linux/kasan.h:192 [inline]
__cache_free mm/slab.c:3424 [inline]
kfree+0xed/0x270 mm/slab.c:3760
ieee80211_ibss_leave+0x83/0xe0 net/mac80211/ibss.c:1876
rdev_leave_ibss net/wireless/rdev-ops.h:545 [inline]
__cfg80211_leave_ibss+0x19a/0x4c0 net/wireless/ibss.c:212
__cfg80211_leave+0x327/0x430 net/wireless/core.c:1172
cfg80211_leave net/wireless/core.c:1221 [inline]
cfg80211_netdev_notifier_call+0x9e8/0x12c0 net/wireless/core.c:1335
notifier_call_chain+0xb5/0x200 kernel/notifier.c:83
call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:2040
call_netdevice_notifiers_extack net/core/dev.c:2052 [inline]
call_netdevice_notifiers net/core/dev.c:2066 [inline]
__dev_close_many+0xee/0x2e0 net/core/dev.c:1586
__dev_close net/core/dev.c:1624 [inline]
__dev_change_flags+0x2cb/0x730 net/core/dev.c:8476
dev_change_flags+0x8a/0x160 net/core/dev.c:8549
dev_ifsioc+0x210/0xa70 net/core/dev_ioctl.c:265
dev_ioctl+0x1b1/0xc40 net/core/dev_ioctl.c:511
sock_do_ioctl+0x148/0x2d0 net/socket.c:1060
sock_ioctl+0x477/0x6a0 net/socket.c:1177
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported-by: syzbot+93976391bf299d425f44@syzkaller.appspotmail.com
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20210213133653.367130-1-markus.theil@tu-ilmenau.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Coverity reported the strange "if (~...)" condition that's
always true. It suggested that ! was intended instead of ~,
but upon further analysis I'm convinced that what really was
intended was a comparison to 0xff/0xffff (in HT/VHT cases
respectively), since this indicates that all of the rates
are enabled.
Change the comparison accordingly.
I'm guessing this never really mattered because a reset to
not having a rate mask is basically equivalent to having a
mask that enables all rates.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: 2ffbe6d33366 ("mac80211: fix and optimize MCS mask handling")
Fixes: b119ad6e726c ("mac80211: add rate mask logic for vht rates")
Reviewed-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210212112213.36b38078f569.I8546a20c80bc1669058eb453e213630b846e107b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Miscellaneous NFSD fixes for v5.12-rc"
* tag 'nfsd-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
svcrdma: Revert "svcrdma: Reduce Receive doorbell rate"
NFSD: fix error handling in NFSv4.0 callbacks
NFSD: fix dest to src mount in inter-server COPY
Revert "nfsd4: a client's own opens needn't prevent delegations"
Revert "nfsd4: remove check_conflicting_opens warning"
rpc: fix NULL dereference on kmalloc failure
sunrpc: fix refcount leak for rpc auth modules
NFSD: Repair misuse of sv_lock in 5.10.16-rt30.
nfsd: don't abort copies early
fs: nfsd: fix kconfig dependency warning for NFSD_V4
svcrdma: disable timeouts on rdma backchannel
nfsd: Don't keep looking up unhashed files in the nfsd file cache
|
|
The previous patch ensures that the TX flags (struct
can_isotp_ll_options::tx_flags) are 0 for classic CAN frames or a user
configured value for CAN-FD frames.
This patch sets the CAN frames flags unconditionally to the ISO-TP TX
flags, so that they are initialized to a proper value. Otherwise when
running "candump -x" on a classical CAN ISO-TP stream shows wrongly
set "B" and "E" flags.
| $ candump any,0:0,#FFFFFFFF -extA
| [...]
| can0 TX B E 713 [8] 2B 0A 0B 0C 0D 0E 0F 00
| can0 TX B E 713 [8] 2C 01 02 03 04 05 06 07
| can0 TX B E 713 [8] 2D 08 09 0A 0B 0C 0D 0E
| can0 TX B E 713 [8] 2E 0F 00 01 02 03 04 05
Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/r/20210218215434.1708249-2-mkl@pengutronix.de
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
CAN-FD frames have struct canfd_frame::flags, while classic CAN frames
don't.
This patch refuses to set TX flags (struct
can_isotp_ll_options::tx_flags) on non CAN-FD isotp sockets.
Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/r/20210218215434.1708249-2-mkl@pengutronix.de
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
When a non-initial netns is destroyed, the usual policy is to delete
all virtual network interfaces contained, but move physical interfaces
back to the initial netns. This keeps the physical interface visible
on the system.
CAN devices are somewhat special, as they define rtnl_link_ops even
if they are physical devices. If a CAN interface is moved into a
non-initial netns, destroying that netns lets the interface vanish
instead of moving it back to the initial netns. default_device_exit()
skips CAN interfaces due to having rtnl_link_ops set. Reproducer:
ip netns add foo
ip link set can0 netns foo
ip netns delete foo
WARNING: CPU: 1 PID: 84 at net/core/dev.c:11030 ops_exit_list+0x38/0x60
CPU: 1 PID: 84 Comm: kworker/u4:2 Not tainted 5.10.19 #1
Workqueue: netns cleanup_net
[<c010e700>] (unwind_backtrace) from [<c010a1d8>] (show_stack+0x10/0x14)
[<c010a1d8>] (show_stack) from [<c086dc10>] (dump_stack+0x94/0xa8)
[<c086dc10>] (dump_stack) from [<c086b938>] (__warn+0xb8/0x114)
[<c086b938>] (__warn) from [<c086ba10>] (warn_slowpath_fmt+0x7c/0xac)
[<c086ba10>] (warn_slowpath_fmt) from [<c0629f20>] (ops_exit_list+0x38/0x60)
[<c0629f20>] (ops_exit_list) from [<c062a5c4>] (cleanup_net+0x230/0x380)
[<c062a5c4>] (cleanup_net) from [<c0142c20>] (process_one_work+0x1d8/0x438)
[<c0142c20>] (process_one_work) from [<c0142ee4>] (worker_thread+0x64/0x5a8)
[<c0142ee4>] (worker_thread) from [<c0148a98>] (kthread+0x148/0x14c)
[<c0148a98>] (kthread) from [<c0100148>] (ret_from_fork+0x14/0x2c)
To properly restore physical CAN devices to the initial netns on owning
netns exit, introduce a flag on rtnl_link_ops that can be set by drivers.
For CAN devices setting this flag, default_device_exit() considers them
non-virtual, applying the usual namespace move.
The issue was introduced in the commit mentioned below, as at that time
CAN devices did not have a dellink() operation.
Fixes: e008b5fc8dc7 ("net: Simplfy default_device_exit and improve batching.")
Link: https://lore.kernel.org/r/20210302122423.872326-1-martin@strongswan.org
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Currently, Linux computes the HMAC contained in ADD_ADDR sub-option using
the Address Id and the IP Address, and hardcodes a destination port equal
to zero. This is not ok for ADD_ADDR with port: ensure to account for the
endpoint port when computing the HMAC, in compliance with RFC8684 §3.4.1.
Fixes: 22fb85ffaefb ("mptcp: add port support for ADD_ADDR suboption writing")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Acked-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently tcp_check_req can be called with obsolete req socket for which big
socket have been already created (because of CPU race or early demux
assigning req socket to multiple packets in gro batch).
Commit e0f9759f530bf789e984 ("tcp: try to keep packet if SYN_RCV race
is lost") added retry in case when tcp_check_req is called for PSH|ACK packet.
But if client sends RST+ACK immediatly after connection being
established (it is performing healthcheck, for example) retry does not
occur. In that case tcp_check_req tries to close req socket,
leaving big socket active.
Fixes: e0f9759f530 ("tcp: try to keep packet if SYN_RCV race is lost")
Signed-off-by: Alexander Ovechkin <ovov@yandex-team.ru>
Reported-by: Oleg Senin <olegsenin@yandex-team.ru>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Before calling tipc_aead_key_size(ptr), we need to ensure
we have enough data to dereference ptr->keylen.
We probably also want to make sure tipc_aead_key_size()
wont overflow with malicious ptr->keylen values.
Syzbot reported:
BUG: KMSAN: uninit-value in __tipc_nl_node_set_key net/tipc/node.c:2971 [inline]
BUG: KMSAN: uninit-value in tipc_nl_node_set_key+0x9bf/0x13b0 net/tipc/node.c:3023
CPU: 0 PID: 21060 Comm: syz-executor.5 Not tainted 5.11.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x21c/0x280 lib/dump_stack.c:120
kmsan_report+0xfb/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x5f/0xa0 mm/kmsan/kmsan_instr.c:197
__tipc_nl_node_set_key net/tipc/node.c:2971 [inline]
tipc_nl_node_set_key+0x9bf/0x13b0 net/tipc/node.c:3023
genl_family_rcv_msg_doit net/netlink/genetlink.c:739 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:783 [inline]
genl_rcv_msg+0x1319/0x1610 net/netlink/genetlink.c:800
netlink_rcv_skb+0x6fa/0x810 net/netlink/af_netlink.c:2494
genl_rcv+0x63/0x80 net/netlink/genetlink.c:811
netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
netlink_unicast+0x11d6/0x14a0 net/netlink/af_netlink.c:1330
netlink_sendmsg+0x1740/0x1840 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg net/socket.c:672 [inline]
____sys_sendmsg+0xcfc/0x12f0 net/socket.c:2345
___sys_sendmsg net/socket.c:2399 [inline]
__sys_sendmsg+0x714/0x830 net/socket.c:2432
__compat_sys_sendmsg net/compat.c:347 [inline]
__do_compat_sys_sendmsg net/compat.c:354 [inline]
__se_compat_sys_sendmsg+0xa7/0xc0 net/compat.c:351
__ia32_compat_sys_sendmsg+0x4a/0x70 net/compat.c:351
do_syscall_32_irqs_on arch/x86/entry/common.c:79 [inline]
__do_fast_syscall_32+0x102/0x160 arch/x86/entry/common.c:141
do_fast_syscall_32+0x6a/0xc0 arch/x86/entry/common.c:166
do_SYSENTER_32+0x73/0x90 arch/x86/entry/common.c:209
entry_SYSENTER_compat_after_hwframe+0x4d/0x5c
RIP: 0023:0xf7f60549
Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00
RSP: 002b:00000000f555a5fc EFLAGS: 00000296 ORIG_RAX: 0000000000000172
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000020000200
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:121 [inline]
kmsan_internal_poison_shadow+0x5c/0xf0 mm/kmsan/kmsan.c:104
kmsan_slab_alloc+0x8d/0xe0 mm/kmsan/kmsan_hooks.c:76
slab_alloc_node mm/slub.c:2907 [inline]
__kmalloc_node_track_caller+0xa37/0x1430 mm/slub.c:4527
__kmalloc_reserve net/core/skbuff.c:142 [inline]
__alloc_skb+0x2f8/0xb30 net/core/skbuff.c:210
alloc_skb include/linux/skbuff.h:1099 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1176 [inline]
netlink_sendmsg+0xdbc/0x1840 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg net/socket.c:672 [inline]
____sys_sendmsg+0xcfc/0x12f0 net/socket.c:2345
___sys_sendmsg net/socket.c:2399 [inline]
__sys_sendmsg+0x714/0x830 net/socket.c:2432
__compat_sys_sendmsg net/compat.c:347 [inline]
__do_compat_sys_sendmsg net/compat.c:354 [inline]
__se_compat_sys_sendmsg+0xa7/0xc0 net/compat.c:351
__ia32_compat_sys_sendmsg+0x4a/0x70 net/compat.c:351
do_syscall_32_irqs_on arch/x86/entry/common.c:79 [inline]
__do_fast_syscall_32+0x102/0x160 arch/x86/entry/common.c:141
do_fast_syscall_32+0x6a/0xc0 arch/x86/entry/common.c:166
do_SYSENTER_32+0x73/0x90 arch/x86/entry/common.c:209
entry_SYSENTER_compat_after_hwframe+0x4d/0x5c
Fixes: e1f32190cf7d ("tipc: add support for AEAD key setting via netlink")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tuong Lien <tuong.t.lien@dektech.com.au>
Cc: Jon Maloy <jmaloy@redhat.com>
Cc: Ying Xue <ying.xue@windriver.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Before this change, the mask is never included in the netlink message, so
"conntrack -E expect" always prints 0.0.0.0.
In older kernels the l3num callback struct was passed as argument, based
on tuple->src.l3num. After the l3num indirection got removed, the call
chain is based on m.src.l3num, but this value is 0xffff.
Init l3num to the correct value.
Fixes: f957be9d349a3 ("netfilter: conntrack: remove ctnetlink callbacks from l3 protocol trackers")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When a new table value was assigned, it was followed by a write memory
barrier. This ensured that all writes before this point would complete
before any writes after this point. However, to determine whether the
rules are unused, the sequence counter is read. To ensure that all
writes have been done before these reads, a full memory barrier is
needed, not just a write memory barrier. The same argument applies when
incrementing the counter, before the rules are read.
Changing to using smp_mb() instead of smp_wmb() fixes the kernel panic
reported in cc00bcaa5899 (which is still present), while still
maintaining the same speed of replacing tables.
The smb_mb() barriers potentially slow the packet path, however testing
has shown no measurable change in performance on a 4-core MIPS64
platform.
Fixes: 7f5c6d4f665b ("netfilter: get rid of atomic ops in fast path")
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
