summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2015-08-25ah6: fix error return codeJulia Lawall1-1/+3
Return a negative error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25RDS: check for valid cm_id before initiating connectionsantosh.shilimkar@oracle.com1-2/+13
Connection could have been dropped while the route is being resolved so check for valid cm_id before initiating the connection. Reviewed-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25RDS: return EMSGSIZE for oversize requests before processing/queueingMukesh Kacker1-5/+6
rds_send_queue_rm() allows for the "current datagram" being queued to exceed SO_SNDBUF thresholds by checking bytes queued without counting in length of current datagram. (Since sk_sndbuf is set to twice requested SO_SNDBUF value as a kernel heuristic this is usually fine!) If this "current datagram" squeezing past the threshold is itself many times the size of the sk_sndbuf threshold itself then even twice the SO_SNDBUF does not save us and it gets queued but cannot be transmitted. Threads block and deadlock and device becomes unusable. The check for this datagram not exceeding SNDBUF thresholds (EMSGSIZE) is not done on this datagram as that check is only done if queueing attempt fails. (Datagrams that follow this datagram fail queueing attempts, go through the check and eventually trip EMSGSIZE error but zero length datagrams silently fail!) This fix moves the check for datagrams exceeding SNDBUF limits before any processing or queueing is attempted and returns EMSGSIZE early in the rds_sndmsg() code. This change also ensures that all datagrams get checked for exceeding SNDBUF/sk_sndbuf size limits and the large datagrams that exceed those limits do not get to rds_send_queue_rm() code for processing. Signed-off-by: Mukesh Kacker <mukesh.kacker@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25RDS: make sure rds_send_drop_to properly takes the m_rs_locksantosh.shilimkar@oracle.com1-1/+15
rds_send_drop_to() is used during socket tear down to find all the messages on the socket and flush them . It can race with the acking code unless it takes the m_rs_lock on each and every message. This plugs a hole where we didn't take m_rs_lock on any message that didn't have the RDS_MSG_ON_CONN set. Taking m_rs_lock avoids double frees and other memory corruptions as the ack code trusts the message m_rs pointer on a socket that had actually been freed. We must take m_rs_lock to access m_rs. Because of lock nesting and rs access, we also need to acquire rs_lock. Reviewed-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25RDS: Don't destroy the rdma id until after we're done using itSantosh Shilimkar1-1/+2
During connection resets, we are destroying the rdma id too soon. We can't destroy it when it is still in use. So lets move rdma_destroy_id() after we clear the rings. Reviewed-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25RDS: Fix assertion level from fatal to warningsantosh.shilimkar@oracle.com2-2/+2
Fix the asserion level since its not fatal and can be hit in normal execution paths. There is no need to take the system down. We keep the WARN_ON() to detect the condition if we get here with bad pages. Reviewed-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25RDS: Make sure we do a signaled send for large-sendsantosh.shilimkar@oracle.com1-0/+5
WR(Work Requests )always generate a WC(Work Completion) with signaled send. Default RDS ib code is setup for un-signaled completion. Since RDS connction is persistent, we can end up sending the data even after large-send when the remote end is not active(for any reason). By doing a signaled send at least once per large-send, we can at least detect the problem in work completion handler there by avoiding sending more data to inactive remote. Reviewed-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25RDS: Mark message mapped before transmitsantosh.shilimkar@oracle.com1-8/+16
rds_send_xmit() marks the rds message map flag after xmit_[rdma/atomic]() which is clearly wrong. We need to maintain the ownership between transport and rds. Also take care of error path. Reviewed-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25RDS: add a sock_destruct callback debug aidsantosh.shilimkar@oracle.com1-0/+9
This helps to detect the accidental processes/apps trying to destroy the RDS socket which they are sharing with other processes/apps. Reviewed-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25RDS: check for congestion updates during rds_send_xmitsantosh.shilimkar@oracle.com1-1/+2
Ensure we don't keep sending the data if the link is congested. Reviewed-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25RDS: make sure we post recv bufferssantosh.shilimkar@oracle.com5-8/+57
If we get an ENOMEM during rds_ib_recv_refill, we might never come back and refill again later. Patch makes sure to kick krdsd into helping out. To achieve this we add RDS_RECV_REFILL flag and update in the refill path based on that so that at least some therad will keep posting receive buffers. Since krdsd and softirq both might race for refill, we decide to schedule on work queue based on ring_low instead of ring_empty. Reviewed-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25RDS: don't update ip address tables if the address hasn't changedsantosh.shilimkar@oracle.com1-2/+7
If the ip address tables hasn't changed, there is no need to remove them only to be added back again. Lets fix it. Reviewed-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25RDS: destroy the ib state earlier during shutdownsantosh.shilimkar@oracle.com1-8/+10
Destroy ib state early during shutdown. Otherwise we can get callbacks after the QP isn't really able to handle them. Reviewed-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25RDS: always free recv frag as we free its ring entrysantosh.shilimkar@oracle.com1-3/+10
We were still seeing rare occurrences of the WARN_ON(recv->r_frag) which indicates that the recv refill path was finding allocated frags in ring entries that were marked free. These were usually followed by OOM crashes. They only seem to be occurring in the presence of completion errors and connection resets. This patch ensures that we free the frag as we mark the ring entry free. This should stop the refill path from finding allocated frags in ring entries that were marked free. Reviewed-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25RDS: restore return value in rds_cmsg_rdma_args()santosh.shilimkar@oracle.com1-0/+2
In rds_cmsg_rdma_args() 'ret' is used by rds_pin_pages() which returns number of pinned pages on success. And the same value is returned to the caller of rds_cmsg_rdma_args() on success which is not intended. Commit f4a3fc03c1d7 ("RDS: Clean up error handling in rds_cmsg_rdma_args") removed the 'ret = 0' line which broke RDS RDMA mode. Fix it by restoring the return value on rds_pin_pages() success keeping the clean-up in place. Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25tcp: refine pacing rate determinationEric Dumazet2-1/+36
When TCP pacing was added back in linux-3.12, we chose to apply a fixed ratio of 200 % against current rate, to allow probing for optimal throughput even during slow start phase, where cwnd can be doubled every other gRTT. At Google, we found it was better applying a different ratio while in Congestion Avoidance phase. This ratio was set to 120 %. We've used the normal tcp_in_slow_start() helper for a while, then tuned the condition to select the conservative ratio as soon as cwnd >= ssthresh/2 : - After cwnd reduction, it is safer to ramp up more slowly, as we approach optimal cwnd. - Initial ramp up (ssthresh == INFINITY) still allows doubling cwnd every other RTT. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25xfrm: Use VRF master index if output device is enslavedDavid Ahern2-4/+10
Directs route lookups to VRF table. Compiles out if NET_VRF is not enabled. With this patch able to successfully bring up ipsec tunnels in VRFs, even with duplicate network configuration. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25tcp: fix slow start after idle vs TSO/GSOEric Dumazet3-8/+9
slow start after idle might reduce cwnd, but we perform this after first packet was cooked and sent. With TSO/GSO, it means that we might send a full TSO packet even if cwnd should have been reduced to IW10. Moving the SSAI check in skb_entail() makes sense, because we slightly reduce number of times this check is done, especially for large send() and TCP Small queue callbacks from softirq context. As Neal pointed out, we also need to perform the check if/when receive window opens. Tested: Following packetdrill test demonstrates the problem // Test of slow start after idle `sysctl -q net.ipv4.tcp_slow_start_after_idle=1` 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 65535 <mss 1000,sackOK,nop,nop,nop,wscale 7> +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 6> +.100 < . 1:1(0) ack 1 win 511 +0 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_SOCKET, SO_SNDBUF, [200000], 4) = 0 +0 write(4, ..., 26000) = 26000 +0 > . 1:5001(5000) ack 1 +0 > . 5001:10001(5000) ack 1 +0 %{ assert tcpi_snd_cwnd == 10 }% +.100 < . 1:1(0) ack 10001 win 511 +0 %{ assert tcpi_snd_cwnd == 20, tcpi_snd_cwnd }% +0 > . 10001:20001(10000) ack 1 +0 > P. 20001:26001(6000) ack 1 +.100 < . 1:1(0) ack 26001 win 511 +0 %{ assert tcpi_snd_cwnd == 36, tcpi_snd_cwnd }% +4 write(4, ..., 20000) = 20000 // If slow start after idle works properly, we should send 5 MSS here (cwnd/2) +0 > . 26001:31001(5000) ack 1 +0 %{ assert tcpi_snd_cwnd == 10, tcpi_snd_cwnd }% +0 > . 31001:36001(5000) ack 1 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-24ila: Precompute checksum difference for translationsTom Herbert1-0/+18
In the ILA build state for LWT compute the checksum difference to apply to transport checksums that include the IPv6 pseudo header. The difference is between the route destination (from fib6_config) and the locator to write. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-24lwt: Add cfg argument to build_stateTom Herbert6-10/+19
Add cfg and family arguments to lwt build state functions. cfg is a void pointer and will either be a pointer to a fib_config or fib6_config structure. The family parameter indicates which one (either AF_INET or AF_INET6). LWT encpasulation implementation may use the fib configuration to build the LWT state. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-24Merge tag 'nfc-next-4.3-1' of ↵David S. Miller3-5/+106
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel Ortiz says: ==================== NFC 4.3 pull request This is the NFC pull request for 4.3. With this one we have: - A new driver for Samsung's S3FWRN5 NFC chipset. In order to properly support this driver, a few NCI core routines needed to be exported. Future drivers like Intel's Fields Peak will benefit from this. - SPI support as a physical transport for STM st21nfcb. - An additional netlink API for sending replies back to userspace from vendor commands. - 2 small fixes for TI's trf7970a - A few st-nci fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-24tipc: fix stale link problem during synchronizationJon Paul Maloy2-3/+12
Recent changes to the link synchronization means that we can now just drop packets arriving on the synchronizing link before the synch point is reached. This has lead to significant simplifications to the implementation, but also turns out to have a flip side that we need to consider. Under unlucky circumstances, the two endpoints may end up repeatedly dropping each other's packets, while immediately asking for retransmission of the same packets, just to drop them once more. This pattern will eventually be broken when the synch point is reached on the other link, but before that, the endpoints may have arrived at the retransmission limit (stale counter) that indicates that the link should be broken. We see this happen at rare occasions. The fix for this is to not ask for retransmissions when a link is in state LINK_SYNCHING. The fact that the link has reached this state means that it has already received the first SYNCH packet, and that it knows the synch point. Hence, it doesn't need any more packets until the other link has reached the synch point, whereafter it can go ahead and ask for the missing packets. However, because of the reduced traffic on the synching link that follows this change, it may now take longer to discover that the synch point has been reached. We compensate for this by letting all packets, on any of the links, trig a check for synchronization termination. This is possible because the packets themselves don't contain any information that is needed for discovering this condition. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-24tipc: interrupt link synchronization when a link goes downJon Paul Maloy2-4/+9
When we introduced the new link failover/synch mechanism in commit 6e498158a827fd515b514842e9a06bdf0f75ab86 ("tipc: move link synch and failover to link aggregation level"), we missed the case when the non-tunnel link goes down during the link synchronization period. In this case the tunnel link will remain in state LINK_SYNCHING, something leading to unpredictable behavior when the failover procedure is initiated. In this commit, we ensure that the node and remaining link goes back to regular communication state (SELF_UP_PEER_UP/LINK_ESTABLISHED) when one of the parallel links goes down. We also ensure that we don't re-enter synch mode if subsequent SYNCH packets arrive on the remaining link. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-24tipc: eliminate risk of premature link setup during failoverJon Paul Maloy1-1/+3
When a link goes down, and there is still a working link towards its destination node, a failover is initiated, and the failed link is not allowed to re-establish until that procedure is finished. To ensure this, the concerned link endpoints are set to state LINK_FAILINGOVER, and the node endpoints to NODE_FAILINGOVER during the failover period. However, if the link reset is due to a disabled bearer, the corres- ponding link endpoint is deleted, and only the node endpoint knows about the ongoing failover. Now, if the disabled bearer is re-enabled during the failover period, the discovery mechanism may create a new link endpoint that is ready to be established, despite that this is not permitted. This situation may cause both the ongoing failover and any subsequent link synchronization to fail. In this commit, we ensure that a newly created link goes directly to state LINK_FAILINGOVER if the corresponding node state is NODE_FAILINGOVER. This eliminates the problem described above. Furthermore, we tighten the criteria for which packets are allowed to end a failover state in the function tipc_node_check_state(). By checking that the receiving link is up and running, instead of just checking that it is not in failover mode, we eliminate the risk that protocol packets from the re-created link may cause the failover to be prematurely terminated. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-24fou: Do WARN_ON_ONCE in gue_gro_receive for bad proto callbacksTom Herbert1-1/+1
Do WARN_ON_ONCE instead of WARN_ON in gue_gro_receive when the offload callcaks are bad (either don't exist or gro_receive is not specified). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-24gro: Fix remcsum offload to deal with frags in GROTom Herbert1-16/+12
The remote checksum offload GRO did not consider the case that frag0 might be in use. This patch fixes that by accessing headers using the skb_gro functions and not saving offsets relative to skb->head. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller11-89/+129
Conflicts: drivers/net/usb/qmi_wwan.c Overlapping additions of new device IDs to qmi_wwan.c Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller32-433/+1152
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next This is second pull request includes the conflict resolution patch that resulted from the updates that we got for the conntrack template through kmalloc. No changes with regards to the previously sent 15 patches. The following patchset contains Netfilter updates for your net-next tree, they are: 1) Rework the existing nf_tables counter expression to make it per-cpu. 2) Prepare and factor out common packet duplication code from the TEE target so it can be reused from the new dup expression. 3) Add the new dup expression for the nf_tables IPv4 and IPv6 families. 4) Convert the nf_tables limit expression to use a token-based approach with 64-bits precision. 5) Enhance the nf_tables limit expression to support limiting at packet byte. This comes after several preparation patches. 6) Add a burst parameter to indicate the amount of packets or bytes that can exceed the limiting. 7) Add netns support to nfacct, from Andreas Schultz. 8) Pass the nf_conn_zone structure instead of the zone ID in nf_tables to allow accessing more zone specific information, from Daniel Borkmann. 9) Allow to define zone per-direction to support netns containers with overlapping network addressing, also from Daniel. 10) Extend the CT target to allow setting the zone based on the skb->mark as a way to support simple mappings from iptables, also from Daniel. 11) Make the nf_tables payload expression aware of the fact that VLAN offload may have removed a vlan header, from Florian Westphal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21Merge branch 'master' of ↵Pablo Neira Ayuso176-2008/+4138
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next Resolve conflicts with conntrack template fixes. Conflicts: net/netfilter/nf_conntrack_core.c net/netfilter/nf_synproxy_core.c net/netfilter/xt_CT.c Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-08-21ipv6: route: per route IP tunnel metadata via lightweight tunnelJiri Benc1-0/+102
Allow specification of per route IP tunnel instructions also for IPv6. This complements commit 3093fbe7ff4b ("route: Per route IP tunnel metadata via lightweight tunnel"). Signed-off-by: Jiri Benc <jbenc@redhat.com> CC: YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21ipv6: route: extend flow representation with tunnel keyJiri Benc1-0/+6
Use flowi_tunnel in flowi6 similarly to what is done with IPv4. This complements commit 1b7179d3adff ("route: Extend flow representation with tunnel key"). Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21ipv6: ndisc: inherit metadata dst when creating ndisc requestsJiri Benc3-5/+9
If output device wants to see the dst, inherit the dst of the original skb in the ndisc request. This is an IPv6 counterpart of commit 0accfc268f4d ("arp: Inherit metadata dst when creating ARP requests"). Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21ipv6: drop metadata dst in ip6_route_inputJiri Benc1-0/+1
The fix in commit 48fb6b554501 is incomplete, as now ip6_route_input can be called with non-NULL dst if it's a metadata dst and the reference is leaked. Drop the reference. Fixes: 48fb6b554501 ("ipv6: fix crash over flow-based vxlan device") Fixes: ee122c79d422 ("vxlan: Flow based tunneling") CC: Wei-Chun Chao <weichunc@plumgrid.com> CC: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21route: move lwtunnel state to dst_entryJiri Benc10-102/+39
Currently, the lwtunnel state resides in per-protocol data. This is a problem if we encapsulate ipv6 traffic in an ipv4 tunnel (or vice versa). The xmit function of the tunnel does not know whether the packet has been routed to it by ipv4 or ipv6, yet it needs the lwtstate data. Moving the lwtstate data to dst_entry makes such inter-protocol tunneling possible. As a bonus, this brings a nice diffstat. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21ip_tunnels: use tos and ttl fields also for IPv6Jiri Benc6-18/+18
Rename the ipv4_tos and ipv4_ttl fields to just 'tos' and 'ttl', as they'll be used with IPv6 tunnels, too. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21ip_tunnels: add IPv6 addresses to ip_tunnel_keyJiri Benc8-25/+25
Add the IPv6 addresses as an union with IPv4 ones. When using IPv4, the newly introduced padding after the IPv4 addresses needs to be zeroed out. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21net: Fix nexthop lookupsDavid Ahern1-1/+8
Andreas reported breakage adding routes with local nexthops: $ ip route show table main ... 172.28.0.0/24 dev vnf-xe1p0 proto kernel scope link src 172.28.0.16 $ ip route add 10.0.0.0/8 via 172.28.0.32 table 100 dev vnf-xe1p0 RTNETLINK answers: Resource temporarily unavailable 3bfd847203c changed the lookup to use the passed in table but for cases like this the nexthop is in the local table rather than the passed in table. Fixes: 3bfd847203c ("net: Use passed in table for nexthop lookups") Reported-by: Andreas Schultz <aschultz@tpip.net> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21bridge: fix netlink max attr sizeScott Feldman1-1/+1
.maxtype should match .policy. Probably just been getting lucky here because IFLA_BRPORT_MAX > IFLA_BR_MAX. Fixes: 13323516 ("bridge: implement rtnl_link_ops->changelink") Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21ipv4: Make fib_encap_match staticYing Xue1-3/+3
Make fib_encap_match() static as it isn't used outside the file. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20nfc: netlink: Add capability to reply to vendor_cmd with dataChristophe Ricard1-2/+84
A proprietary vendor command may send back useful data to the user application. For example, the field level applied on the NFC router antenna. Still based on net/wireless/nl80211.c implementation, add nfc_vendor_cmd_alloc_reply_skb and nfc_vendor_cmd_reply in order to send back over netlink data generated by a proprietary command. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20nfc: nci: hci: Add check on skb nci_hci_send_cmd parameterChristophe Ricard1-1/+1
skb can be NULL and may lead to a NULL pointer error. Add a check condition before setting HCI rx buffer. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20NFC: nci: export nci_core_reset and nci_core_initRobert Baldyga1-0/+14
Some drivers needs to have ability to reinit NCI core, for example after updating firmware in setup() of post_setup() callback. This patch makes nci_core_reset() and nci_core_init() functions public, to make it possible. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20NFC: nci: Add post_setup handlerRobert Baldyga1-0/+4
Some drivers require non-standard configuration after NCI_CORE_INIT request, because they need to know ndev->manufact_specific_info or ndev->manufact_id. This patch adds post_setup handler allowing to do such custom configuration. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20vrf: vrf_master_ifindex_rcu is not always called with rcu read lockNikolay Aleksandrov1-2/+2
While running net-next I hit this: [ 634.073119] =============================== [ 634.073150] [ INFO: suspicious RCU usage. ] [ 634.073182] 4.2.0-rc6+ #45 Not tainted [ 634.073213] ------------------------------- [ 634.073244] include/net/vrf.h:38 suspicious rcu_dereference_check() usage! [ 634.073274] other info that might help us debug this: [ 634.073307] rcu_scheduler_active = 1, debug_locks = 1 [ 634.073338] 2 locks held by swapper/0/0: [ 634.073369] #0: (((&n->timer))){+.-...}, at: [<ffffffff8112bc35>] call_timer_fn+0x5/0x480 [ 634.073412] #1: (slock-AF_INET){+.-...}, at: [<ffffffff8174f0f5>] icmp_send+0x155/0x5f0 [ 634.073450] stack backtrace: [ 634.073483] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.2.0-rc6+ #45 [ 634.073514] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 634.073545] 0000000000000000 0593ba8242d9ace4 ffff88002fc03b48 ffffffff81803f1b [ 634.073612] 0000000000000000 ffffffff81e12500 ffff88002fc03b78 ffffffff811003c5 [ 634.073642] 0000000000000000 ffff88002ec4e600 ffffffff81f00f80 ffff88002fc03cf0 [ 634.073669] Call Trace: [ 634.073694] <IRQ> [<ffffffff81803f1b>] dump_stack+0x4c/0x65 [ 634.073728] [<ffffffff811003c5>] lockdep_rcu_suspicious+0xc5/0x100 [ 634.073763] [<ffffffff8174eb56>] icmp_route_lookup+0x176/0x5c0 [ 634.073793] [<ffffffff8174f2fb>] ? icmp_send+0x35b/0x5f0 [ 634.073818] [<ffffffff8174f274>] ? icmp_send+0x2d4/0x5f0 [ 634.073844] [<ffffffff8174f3ce>] icmp_send+0x42e/0x5f0 [ 634.073873] [<ffffffff8170b662>] ipv4_link_failure+0x22/0xa0 [ 634.073899] [<ffffffff8174bdda>] arp_error_report+0x3a/0x80 [ 634.073926] [<ffffffff816d6100>] ? neigh_lookup+0x2c0/0x2c0 [ 634.073952] [<ffffffff816d396e>] neigh_invalidate+0x8e/0x110 [ 634.073984] [<ffffffff816d62ae>] neigh_timer_handler+0x1ae/0x290 [ 634.074013] [<ffffffff816d6100>] ? neigh_lookup+0x2c0/0x2c0 [ 634.074013] [<ffffffff8112bce3>] call_timer_fn+0xb3/0x480 [ 634.074013] [<ffffffff8112bc35>] ? call_timer_fn+0x5/0x480 [ 634.074013] [<ffffffff816d6100>] ? neigh_lookup+0x2c0/0x2c0 [ 634.074013] [<ffffffff8112c2bc>] run_timer_softirq+0x20c/0x430 [ 634.074013] [<ffffffff810af50e>] __do_softirq+0xde/0x630 [ 634.074013] [<ffffffff810afc97>] irq_exit+0x117/0x120 [ 634.074013] [<ffffffff81810976>] smp_apic_timer_interrupt+0x46/0x60 [ 634.074013] [<ffffffff8180e950>] apic_timer_interrupt+0x70/0x80 [ 634.074013] <EOI> [<ffffffff8106b9d6>] ? native_safe_halt+0x6/0x10 [ 634.074013] [<ffffffff81101d8d>] ? trace_hardirqs_on+0xd/0x10 [ 634.074013] [<ffffffff81027d43>] default_idle+0x23/0x200 [ 634.074013] [<ffffffff8102852f>] arch_cpu_idle+0xf/0x20 [ 634.074013] [<ffffffff810f89ba>] default_idle_call+0x2a/0x40 [ 634.074013] [<ffffffff810f8dcc>] cpu_startup_entry+0x39c/0x4c0 [ 634.074013] [<ffffffff817f9cad>] rest_init+0x13d/0x150 [ 634.074013] [<ffffffff81f69038>] start_kernel+0x4a8/0x4c9 [ 634.074013] [<ffffffff81f68120>] ? early_idt_handler_array+0x120/0x120 [ 634.074013] [<ffffffff81f68339>] x86_64_start_reservations+0x2a/0x2c [ 634.074013] [<ffffffff81f68485>] x86_64_start_kernel+0x14a/0x16d It would seem vrf_master_ifindex_rcu() can be called without RCU held in other contexts as well so introduce a new helper which acquires rcu and returns the ifindex. Also add curly braces around both the "if" and "else" parts as per the style guide. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-19netfilter: nft_payload: work around vlan header strippingFlorian Westphal1-1/+56
make payload expression aware of the fact that VLAN offload may have removed a vlan header. When we encounter tagged skb, transparently insert the tag into the register so that vlan header matching can work without userspace being aware of offload features. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-08-19lwtunnel: ip tunnel: fix multiple routes with different encapJiri Benc1-0/+7
Currently, two routes going through the same tunnel interface are considered the same even when they are routed to a different host after encapsulation. This causes all routes added after the first one to have incorrect encapsulation parameters. This is nicely visible by doing: # ip r a 192.168.1.2/32 dev vxlan0 tunnel dst 10.0.0.2 # ip r a 192.168.1.3/32 dev vxlan0 tunnel dst 10.0.0.3 # ip r [...] 192.168.1.2/32 tunnel id 0 src 0.0.0.0 dst 10.0.0.2 [...] 192.168.1.3/32 tunnel id 0 src 0.0.0.0 dst 10.0.0.2 [...] Implement the missing comparison function. Fixes: 3093fbe7ff4bc ("route: Per route IP tunnel metadata via lightweight tunnel") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-19lwtunnel: fix memory leakJiri Benc1-4/+6
The built lwtunnel_state struct has to be freed after comparison. Fixes: 571e722676fe3 ("ipv4: support for fib route lwtunnel encap attributes") Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-19batman-adv: Fix memory leak on tt add with invalid vlanSven Eckelmann1-1/+4
The object tt_local is allocated with kmalloc and not initialized when the function batadv_tt_local_add checks for the vlan. But this function can only cleanup the object when the (not yet initialized) reference counter of the object is 1. This is unlikely and thus the object would leak when the vlan could not be found. Instead the uninitialized object tt_local has to be freed manually and the pointer has to set to NULL to avoid calling the function which would try to decrement the reference counter of the not existing object. CID: 1316518 Fixes: 354136bcc3c4 ("batman-adv: fix kernel crash due to missing NULL checks") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-19net: dsa: Allow multi hop routes to be expressedAndrew Lunn1-10/+30
With more than two switches in a hierarchy, it becomes necessary to describe multi-hop routes between switches. The current binding does not allow this, although the older platform_data did. Extend the link property to be a list rather than a single phandle to a remote switch. It is then possible to express that a port should be used to reach more than one switch and the switch maybe more than one hop away. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: sched: drop all special handling of tx_queue_len == 0Phil Sutter5-17/+9
Those were all workarounds for the formerly double meaning of tx_queue_len, which broke scheduling algorithms if untreated. Now that all in-tree drivers have been converted away from setting tx_queue_len = 0, it should be safe to drop these workarounds for categorically broken setups. Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-25 01:40:08 +0300