summaryrefslogtreecommitdiff
path: root/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2012-04-12Merge branch 'master' into for-davemJohn W. Linville8-34/+147
Conflicts: drivers/net/wireless/iwlwifi/iwl-testmode.c net/wireless/nl80211.c
2012-04-12Merge branch 'master' of ↵John W. Linville3-23/+24
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-04-12cfg80211: add channel switch notify eventThomas Pedersen3-0/+63
The firmware may decide to switch channels while already beaconing, e.g. in response to a cfg80211 connect request on a different vif. Add this event to notify userspace when an AP or GO interface has successfully migrated to a new channel, so it can update its configuration accordingly. Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12cfg80211/mac80211: enable proper device_set_wakeup_enable handlingJohannes Berg2-1/+8
In WoWLAN, we only get the triggers when we actually get to suspend. As a consequence, drivers currently don't know that the device should enable wakeup. However, the device_set_wakeup_enable() API is intended to be called when the wakeup is enabled, not later when needed. Add a new set_wakeup() call to cfg80211 and mac80211 to allow drivers to properly call device_set_wakeup_enable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10{nl,cfg}80211: Support for mesh synchronizationJavier Cardona2-0/+19
Report Toffset to userspace. Let userspace select the mesh synchronization method. Signed-off-by: Marco Porsch <marco.porsch@s2005.tu-chemnitz.de> Signed-off-by: Pavel Zubarev <pavel.zubarev@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10cfg80211/nl80211: clarify TX queue APIJohannes Berg1-2/+5
With the plan to change mac80211's queue API to not map ACs to queues 1:1, it seems necessary to clarify some APIs that act on ACs rather than on queues to spell that out explicitly. Do this. Also verify that the AC number given is valid. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-8/+2
2012-04-10cfg80211: warn if db.txt is empty with CONFIG_CFG80211_INTERNAL_REGDBLuis R. Rodriguez1-0/+10
It has happened twice now where elaborate troubleshooting has undergone on systems where CONFIG_CFG80211_INTERNAL_REGDB [0] has been set but yet net/wireless/db.txt was not updated. Despite the documentation on this it seems system integrators could use some more help with this, so throw out a kernel warning at boot time when their database is empty. This does mean that the error-prone system integrator won't likely realize the issue until they boot the machine but -- it does not seem to make sense to enable a build bug breaking random build testing. [0] http://wireless.kernel.org/en/developers/Regulatory/CRDA#CONFIG_CFG80211_INTERNAL_REGDB Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Youngsin Lee <youngsin@qualcomm.com> Cc: Raja Mani <rmani@qca.qualcomm.com> Cc: Senthil Kumar Balasubramanian <senthilb@qca.qualcomm.com> Cc: Vipin Mehta <vipimeht@qca.qualcomm.com> Cc: yahuan@qca.qualcomm.com Cc: jjan@qca.qualcomm.com Cc: vthiagar@qca.qualcomm.com Cc: henrykim@qualcomm.com Cc: jouni@qca.qualcomm.com Cc: athiruve@qca.qualcomm.com Cc: cjkim@qualcomm.com Cc: philipk@qca.qualcomm.com Cc: sunnykim@qualcomm.com Cc: sskwak@qualcomm.com Cc: kkim@qualcomm.com Cc: mattbyun@qualcomm.com Cc: ryanlee@qualcomm.com Cc: simbap@qualcomm.com Cc: krislee@qualcomm.com Cc: conner@qualcomm.com Cc: hojinkim@qualcomm.com Cc: honglee@qualcomm.com Cc: johnwkim@qualcomm.com Cc: jinyong@qca.qualcomm.com Cc: stable@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10cfg80211: use compare_ether_addr on MAC addresses instead of memcmpFelix Fietkau2-16/+18
Because of the constant size and guaranteed 16 bit alignment, the inline compare_ether_addr function is much cheaper than calling memcmp. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09net/wireless/wext-core.c: add missing kfreeJulia Lawall1-2/+4
Free extra as done in the error-handling code just above. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09nl80211: ensure interface is up in various APIsJohannes Berg1-13/+18
The nl80211 handling code should ensure as much as it can that the interface is in a valid state, it can certainly ensure the interface is running. Not doing so can cause calls through mac80211 into the driver that result in warnings and unspecified behaviour in the driver. Cc: stable@vger.kernel.org Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-06Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds1-8/+2
Merge batch of fixes from Andrew Morton: "The simple_open() cleanup was held back while I wanted for laggards to merge things. I still need to send a few checkpoint/restore patches. I've been wobbly about merging them because I'm wobbly about the overall prospects for success of the project. But after speaking with Pavel at the LSF conference, it sounds like they're further toward completion than I feared - apparently davem is at the "has stopped complaining" stage regarding the net changes. So I need to go back and re-review those patchs and their (lengthy) discussion." * emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches) memcg swap: use mem_cgroup_uncharge_swap fix backlight: add driver for DA9052/53 PMIC v1 C6X: use set_current_blocked() and block_sigmask() MAINTAINERS: add entry for sparse checker MAINTAINERS: fix REMOTEPROC F: typo alpha: use set_current_blocked() and block_sigmask() simple_open: automatically convert to simple_open() scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open() libfs: add simple_open() hugetlbfs: remove unregister_filesystem() when initializing module drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback fs/xattr.c:setxattr(): improve handling of allocation failures fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed fs/xattr.c: suppress page allocation failure warnings from sys_listxattr() sysrq: use SEND_SIG_FORCED instead of force_sig() proc: fix mount -t proc -o AAA
2012-04-06simple_open: automatically convert to simple_open()Stephen Boyd1-8/+2
Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-02wireless: Stop using NLA_PUT*().David S. Miller2-545/+662
These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-26cfg80211: allow CFG80211_SIGNAL_TYPE_UNSPEC in station_infoJohn W. Linville1-10/+19
The station_info struct had demanded dBm signal values, but the cfg80211 wireless extensions implementation was also accepting "unspecified" (i.e. RSSI) unit values while the nl80211 code was completely unaware of them. Resolve this by formally allowing the "unspecified" units while making nl80211 ignore them. Signed-off-by: John W. Linville <linville@tuxdriver.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
2012-03-13cfg80211: clarify timestamp in cfg80211_inform_bssJohannes Berg1-4/+3
This is intended to be the timestamp sent by the peer in the beacon/probe response, not any form of host timestamp. Clarify the documentation and variable names. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12cfg80211: Add background scan period attribute.Bala Shanmugam2-0/+11
Receive background scan period as part of connect command and pass the same to the driver. Signed-off-by: Bala Shanmugam <bkamatch@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07cfg80211: expose cfg80211_calculate_bitrate()Thomas Pedersen1-0/+1
Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07cfg80211/mac80211: report signal strength for mgmt framesJohannes Berg3-6/+13
Add the signal strength (in dBm only for now) to frames that are received via nl80211's various frame APIs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06cfg80211: Add an attribute to set inactivity timeout in AP modeVasanthakumar Thiagarajan1-0/+8
This patch adds an attribute, NL80211_ATTR_INACTIVITY_TIMEOUT, to set the inactivity timeout which can be used to remove the station in AP mode. This can be passed in NL80211_CMD_START_AP and used by the drivers which have AP MLME in firmware but don't support get_station() properly. To disable inactivity timer in userspace, wpa_s for example, there is a new flag, NL80211_FEATURE_INACTIVITY_TIMER, in nl80211_feature_flags through which drivers can register their capability to use the inactivity timeout to free the stations. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06{nl,cfg,mac}80211: Implement RSSI threshold for mesh peeringAshok Nagarajan2-0/+8
Mesh peer links are established only if average rssi of the peer candidate satisfies the threshold. This is not in 802.11s specification but was requested by David Fulgham, an open80211s user. This is a way to avoid marginal peer links with stations that are barely within range. This patch adds a new mesh configuration parameter, mesh_rssi_threshold. This feature is supported only for hardwares that report signal in dBm. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29cfg80211: remove cookies from callbacksJohannes Berg1-3/+3
In "cfg80211: no cookies in cfg80211_send_XXX()" Holger Schurig removed the cookies in the calls from mac80211 to cfg80211, but the ones in the other direction were left in. Remove them now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22cfg80211: restructure AP/GO mode APIJohannes Berg1-113/+142
The AP/GO mode API isn't very clearly defined, it has "set beacon" and "new beacon" etc. Modify the API to the following: * start AP -- all settings * change beacon -- new beacon data * stop AP -- stop AP mode operation This also reflects in the nl80211 API, rename the commands there correspondingly (but keep the old names for compatibility.) Overall, this makes it much clearer what's going on in the API. Kalle developed the ath6kl changes, I created the rest of the patch. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mac80211: off by one in mcs mask handlingDan Carpenter1-1/+1
"ridx" is used as an index into the mcs_mask[] array which has IEEE80211_HT_MCS_MASK_LEN elements. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06cfg80211/mac80211: userspace peer authorization in IBSSAntonio Quartulli1-8/+12
If the IBSS network is RSN-protected, let userspace authorize the stations instead of adding them as AUTHORIZED by default. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06cfg80211: export cfg80211_ref_bssJohannes Berg2-5/+12
This is needed by mac80211 to keep a reference to a BSS alive for the auth process. Remove the old version of cfg80211_ref_bss() since it's not actually used. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06cfg80211: stop tracking authenticated stateJohannes Berg4-318/+72
To track authenticated state seems to have been a design mistake in cfg80211. It is possible to have out of band authentication (FT), tracking multiple authentications caused more problems than it ever helped, and the implementation in mac80211 is too complex. Remove all this complexity, and let userspace do whatever it wants to, mac80211 can deal with that just fine. Association is still tracked of course, but authentication no longer is. Local auth state changes are thus no longer of value, so ignore them completely. This will also help implement SAE -- asking the driver to do an authentication is now almost equivalent to sending an authentication frame, with the exception of shared key authentication which is still handled completely. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-31nl80211: add support for mcs masksSimon Wunderlich1-1/+60
Allow to set mcs masks through nl80211. We also allow to set MCS rates but no legacy rates (and vice versa). Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-27{nl,cfg,mac}80211: Add support of setting non-forwarding entity in MeshChun-Yeow Yeoh2-0/+6
A mesh node that joins the mesh network is by default a forwarding entity. This patch allows the mesh node to set as non-forwarding entity. Whenever dot11MeshForwarding is set to 0, the mesh node can prevent itself from forwarding the traffic which is not destined to him. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-27cfg80211: fix a few -Wshadow warningsJohannes Berg1-5/+3
It seems that -Wshadow is no longer default in sparse runs, but let's fix the warnings anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24wireless: Save original maximum regulatory transmission power for the ↵Hong Wu1-17/+2
calucation of the local maximum transmit power The local maximum transmit power is the maximum power a wireless device allowed to transmit. If Power Constraint is presented, the local maximum power equals to the maximum allowed power defined in regulatory domain minus power constraint. The maximum transmit power is maximum power a wireless device capable of transmitting, and should be used in Power Capability element (7.3.2.16 IEEE802.11 2007). The transmit power from a wireless device should not greater than the local maximum transmit power. The maximum transmit power was not calculated correctly in the current Linux wireless/mac80211 when Power Constraint is presented. Signed-off-by: Hong Wu <hong.wu@dspg.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-12nl80211: fix old station flags compatibilityJohannes Berg1-4/+30
My patch to validate station flags broke compatibility with the old station flags setting where all flags are always set at once since it always set the mask as all possible flags which ended up being rejected later in the station add/modify code. Fix by parsing only the current flags in the old flags attribute -- new applications and new flags should use (and will now require) the new flags attribute where the mask is given by the application. Reported-and-tested-by: Thomas Hilber <ath9k-dev@toh.cx> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04wireless: Treat IPv6 diffserv the same as IPv4 for 802.11eDave Täht1-1/+5
Wireless will select a different hardware queue based on the top 3 bits of the diffserv field, for ipv4. Extend that queue selection mechanism to ipv6, and make the calls orthogonal. Signed-off-by: Dave Täht <dave.taht@bufferbloat.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04cfg80211: relicense reg.c reg.h and genregdb.awk to ISCLuis R. Rodriguez4-7/+54
Following the tradition we have had with ath5k, ath9k, CRDA, wireless-regdb I'd like to license this code under the permissive ISC license for the code sharing purposes with other OSes, it'd sure be nice to help the landscape in this area. Although I am %82.89 owner of the regulatory code I have asked every contributor to the regulatory code and have receieved positive Acked-bys from everyone except two deceased entities: o Frans Pop RIP 2010 [0] - Frans Pop <elendil@planet.nl> - Frans Pop <fjp@debian.org> o Nokia RIP February, 11, 2011 [1], [2] - ext-yuri.ershov@nokia.com - kalle.valo@nokia.com Frans Pop's contribution was a simple patch 55f98938, titled, "wireless: remove trailing space in messages" which just add a \n to some printk lines. I'm going to treat these additions as uncopyrightable. As for the contributions made by employees on behalf of Nokia my contact point was Petri Karhula <petri.karhula@nokia.com> but after one month he noted he had not been able to get traction from the legal department on this request, as such it I proceeded by replacing their contributions in previous patches. The end goal is to help a clean rewrite that starts in userspace that is shared under ISC license which currently is taking place with the regulatory simulator [3]. [0] http://lists.debian.org/debian-devel/2011/12/msg00263.html [1] http://press.nokia.com/2011/02/11/nokia-outlines-new-strategy-introduces-new-leadership-operational-structure/ [2] http://NokiaPlanB.com [3] git://github.com/mcgrof/regsim.git Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Acked-by: Dan Carpenter <error27@gmail.com> Acked-by: Mihai Moldovan <ionic@ionic.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sven Neumann <s.neumann@raumfeld.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Tony Vroon <tony@linx.net> Acked-by: Pavel Roskin <proski@gnu.org> Acked-by: Bob Copeland <me@bobcopeland.com> Acked-by: Lucas De Marchi <lucas.demarchi@profusion.mobi> Acked-by: Pat Erley <pat-lkml@erley.org> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: John W. Linville <linville@tuxdriver.com> Acked-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Joe Perches <joe@perches.com> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: John Gordon <john@devicescape.com> Acked-by: Simon Barber <protocolmagic@gmail.com> Acked-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Acked-by: Jiri Benc <jbenc@upir.cz> Acked-by: Bruno Randolf <br1@einfach.org> Acked-by: Scott James Remnant <keybuk@google.com> Acked-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04cfg80211: replace reg.c Nokia commit 269ac5Luis R. Rodriguez1-3/+3
Nokia hasn't gotten back to me in over 1 month for a relicense change request. There are only a few changes that they contributed, so just reverting their changes but replacing with another set. This change replaces this commit: commit 269ac5fd2d75b118d76a2291e28796527db2f3f8 Author: Kalle Valo <kalle.valo@nokia.com> Date: Tue Dec 1 10:47:15 2009 +0200 cfg80211: indent regulatory messages with spaces The regulatory messages in syslog look weird: kernel: cfg80211: Regulatory domain: US kernel: ^I(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) kernel: ^I(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) kernel: ^I(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) kernel: ^I(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) kernel: ^I(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) kernel: ^I(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) kernel: ^I(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) Indent them with four spaces instead of the tab character to get prettier output. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Acked: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Cc: Petri Karhula <petri.karhula@nokia.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04cfg80211: replace reg.c Nokia commit c4c32294Luis R. Rodriguez1-6/+6
Nokia hasn't gotten back to me in over 1 month for a relicense change request. There are only a few changes that they contributed, so just reverting their changes but replacing with another set. This change replaces this commit: commit c4c322941ce0d7e2b7b8794ad70683123d9cb26a Author: Yuri Ershov <ext-yuri.ershov@nokia.com> Date: Tue Jun 29 15:08:08 2010 +0400 cfg80211: Update of regulatory request initiator handling In some cases there could be possible dereferencing freed pointer. The update is intended to avoid this issue. Signed-off-by: Yuri Ershov <ext-yuri.ershov@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Cc: Petri Karhula <petri.karhula@nokia.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04wireless: Protect regdomain change by mutexDmitry Shmidt1-1/+4
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19cfg80211: Return beacon loss count in stationPaul Stewart1-0/+3
If station info contains a beacon loss count, return it to userspace. Signed-off-by: Paul Stewart <pstew@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-16cfg80211: Restore orig channel values upon disconnectRajkumar Manoharan1-0/+26
When we restore regulatory settings the world regulatory domain is properly reset on cfg80211 (or user prefered regulatory domain) but we were never setting back channel values for drivers that use WIPHY_FLAG_CUSTOM_REGULATORY. Set these values up again by using the orig_ channel parameters. This fixes restoring custom regulatory settings upon disconnect events. Cc: compat@orbit-lab.org Cc: Paul Stewart <pstew@google.com> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Cc: Senthilkumar Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-16cfg80211: allow following country IE power for custom regdom cardsLuis R. Rodriguez1-4/+16
By definition WIPHY_FLAG_STRICT_REGULATORY was intended to allow the wiphy to adjust itself to the country IE power information if the card had no regulatory data but we had no way to tell cfg80211 that if the card also had its own custom regulatory domain (these are typically custom world regulatory domains) that we want to follow the country IE's noted values for power for each channel. We add support for this and document it. This is not a critical fix but a performance optimization for cards with custom regulatory domains that associate to an AP with sends out country IEs with a higher EIRP than the one on the custom regulatory domain. In practice the only driver affected right now are the Atheros drivers as they are the only drivers using both WIPHY_FLAG_STRICT_REGULATORY and WIPHY_FLAG_CUSTOM_REGULATORY -- used on cards that have an Atheros world regulatory domain. Cards that have been programmed to follow a country specifically will not follow the country IE power. So although not a stable fix distributions should consider cherry picking this. Cc: compat@orbit-lab.org Cc: Paul Stewart <pstew@google.com> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Cc: Senthilkumar Balasubramanian <senthilb@qca.qualcomm.com> Reported-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15cfg80211: validate nl80211 station handling betterJohannes Berg1-87/+112
The nl80211 station handling code is a bit messy and doesn't do a lot of validation. It seems like this could be an issue for drivers that don't use mac80211 to validate everything. As cfg80211 doesn't keep station state, move the validation of allowing supported_rates to change for TDLS only in station mode to mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15nl80211: add TDLS peer flag to policyJohannes Berg1-0/+1
This was evidently missed in the TDLS patch (07ba55d7). Cc: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14nl80211: accept testmode dump with netdevJohannes Berg1-19/+31
All nl80211 commands that need only the wiphy still allow identifying it by giving an interface index, except, as Kenny pointed out, the testmode dump support. Fix this by looking up the wiphy via the ifidx in this case as well. Tested-by: Kenny Hsu <kenny.hsu@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14cfg80211: notify core hints that helps to restore regd settingsRajkumar Manoharan1-2/+14
Regulatory updates set by CORE are ignored for custom regulatory cards. Let us notify the changes to the driver, as some drivers uses core hint to restore its orig_* reg domain setting. Cc: Paul Stewart <pstew@google.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14cfg80211: Fix race in bss timeoutVasanthakumar Thiagarajan3-28/+45
It is quite possible to run into a race in bss timeout where the drivers see the bss entry just before notifying cfg80211 of a roaming event but it got timed out by the time rdev->event_work got scehduled from cfg80211_wq. This would result in the following WARN-ON() along with the failure to notify the user space of the roaming. The other situation which is happening with ath6kl that runs into issue is when the driver reports roam to same AP event where the AP bss entry already got expired. To fix this, move cfg80211_get_bss() from __cfg80211_roamed() to cfg80211_roamed(). [158645.538384] WARNING: at net/wireless/sme.c:586 __cfg80211_roamed+0xc2/0x1b1() [158645.538810] Call Trace: [158645.538838] [<c1033527>] warn_slowpath_common+0x65/0x7a [158645.538917] [<c14cfacf>] ? __cfg80211_roamed+0xc2/0x1b1 [158645.538946] [<c103354b>] warn_slowpath_null+0xf/0x13 [158645.539055] [<c14cfacf>] __cfg80211_roamed+0xc2/0x1b1 [158645.539086] [<c14beb5b>] cfg80211_process_rdev_events+0x153/0x1cc [158645.539166] [<c14bd57b>] cfg80211_event_work+0x26/0x36 [158645.539195] [<c10482ae>] process_one_work+0x219/0x38b [158645.539273] [<c14bd555>] ? wiphy_new+0x419/0x419 [158645.539301] [<c10486cb>] worker_thread+0xf6/0x1bf [158645.539379] [<c10485d5>] ? rescuer_thread+0x1b5/0x1b5 [158645.539407] [<c104b3e2>] kthread+0x62/0x67 [158645.539484] [<c104b380>] ? __init_kthread_worker+0x42/0x42 [158645.539514] [<c151309a>] kernel_thread_helper+0x6/0xd Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-08wireless: disable wext sysfs by defaultJohannes Berg1-3/+4
This code has been on the list to remove for a long time, so disable it by default, add a warning to its Kconfig, and schedule it for removal in 3.5. The only known dependency, hal, has not required it since its 0.5.12 release, which was in early 2009 and hal has since been deprecated completely. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07nl80211: Parse channel type attribute in an ibss join requestAlexander Simon2-7/+37
Prepare cfg80211 for IBSS HT: * extend cfg80211 ibss struct with channel_type * Check if extension channel can be used * Export can_beacon_sec_chan for use in mac80211 (will be called from ibss.c later). Signed-off-by: Alexander Simon <an.alexsimon@googlemail.com> [siwu@hrz.tu-chemnitz.de: Updates] * fix cfg80211_can_beacon_ext_chan comment * remove implicit channel_type enum assumptions * remove radar channel flags check * add HT IBSS feature flag * reword commit message Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-03Merge branch 'master' of ↵John W. Linville2-16/+36
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/iwl-agn.c drivers/net/wireless/libertas/cfg.c
2011-11-30cfg80211: amend regulatory NULL dereference fixLuis R. Rodriguez1-2/+4
Johannes' patch for "cfg80211: fix regulatory NULL dereference" broke user regulaotry hints and it did not address the fact that last_request was left populated even if the previous regulatory hint was stale due to the wiphy disappearing. Fix user reguluatory hints by only bailing out if for those regulatory hints where a request_wiphy is expected. The stale last_request considerations are addressed through the previous fixes on last_request where we reset the last_request to a static world regdom request upon reset_regdomains(). In this case though we further enhance the effect by simply restoring reguluatory settings completely. Cc: stable@vger.kernel.org Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-30cfg80211: fix race on init and driver registrationLuis R. Rodriguez1-16/+27
There is a theoretical race that if hit will trigger a crash. The race is between when we issue the first regulatory hint, regulatory_hint_core(), gets processed by the workqueue and between when the first device gets registered to the wireless core. This is not easy to reproduce but it was easy to do so through the regulatory simulator I have been working on. This is a port of the fix I implemented there [1]. [1] https://github.com/mcgrof/regsim/commit/a246ccf81f059cb662eee288aa13100f631e4cc8 Cc: stable@vger.kernel.org Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>