summaryrefslogtreecommitdiff
path: root/net/wireless/trace.h
AgeCommit message (Collapse)AuthorFilesLines
2024-09-06wifi: cfg80211: handle DFS per linkAditya Kumar Singh1-11/+20
Currently, during starting a radar detection, no link id information is parsed and passed down. In order to support starting radar detection during Multi Link Operation, it is required to pass link id as well. Add changes to first parse and then pass link id in the start radar detection path. Additionally, update notification APIs to allow drivers/mac80211 to pass the link ID. However, everything is handled at link 0 only until all API's are ready to handle it per link. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-6-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06wifi: trace: unlink rdev_end_cac trace event from wiphy_netdev_evt classAditya Kumar Singh1-3/+12
rdev_end_cac trace event is linked with wiphy_netdev_evt event class. There is no option to pass link ID currently to wiphy_netdev_evt class. A subsequent change would pass link ID to rdev_end_cac event and hence it can no longer derive the event class from wiphy_netdev_evt. Therefore, unlink rdev_end_cac event from wiphy_netdev_evt and define it's own independent trace event. Link ID would be passed in subsequent change. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-4-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: cfg80211: add regulatory flag to allow VLP AP operationJohannes Berg1-6/+9
Add a regulatory flag to allow VLP AP operation even on channels otherwise marked NO_IR, which may be possible in some regulatory domains/countries. Note that this requires checking also when the beacon is changed, since that may change the regulatory power type. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240523120945.63792ce19790.Ie2a02750d283b78fbf3c686b10565fb0388889e2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-11Merge tag 'wireless-next-2024-06-07' of ↵Jakub Kicinski1-69/+143
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.11 The first "new features" pull request for v6.11 with changes both in stack and in drivers. Nothing out of ordinary, except that we have two conflicts this time: net/mac80211/cfg.c https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au drivers/net/wireless/microchip/wilc1000/netdev.c https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au Major changes: cfg80211/mac80211 * parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers wilc1000 * read MAC address during probe to make it visible to user space iwlwifi * bump FW API to 91 for BZ/SC devices * report 64-bit radiotap timestamp * enable P2P low latency by default * handle Transmit Power Envelope (TPE) advertised by AP * start using guard() rtlwifi * RTL8192DU support ath12k * remove unsupported tx monitor handling * channel 2 in 6 GHz band support * Spatial Multiplexing Power Save (SMPS) in 6 GHz band support * multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support * dynamic VLAN support * add panic handler for resetting the firmware state ath10k * add qcom,no-msa-ready-indicator Device Tree property * LED support for various chipsets * tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits) wifi: ath12k: add hw_link_id in ath12k_pdev wifi: ath12k: add panic handler wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity() wifi: brcm80211: remove unused structs wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type) wifi: ath12k: do not process consecutive RDDM event dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup() wifi: rtlwifi: handle return value of usb init TX/RX wifi: rtlwifi: Enable the new rtl8192du driver wifi: rtlwifi: Add rtl8192du/sw.c wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg wifi: rtlwifi: Add rtl8192du/dm.{c,h} wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h} wifi: rtlwifi: Add rtl8192du/rf.{c,h} wifi: rtlwifi: Add rtl8192du/trx.{c,h} wifi: rtlwifi: Add rtl8192du/phy.{c,h} wifi: rtlwifi: Add rtl8192du/hw.{c,h} wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU wifi: rtlwifi: Add rtl8192du/table.{c,h} ... Signed-off-by: Jakub Kicinski <kuba@kernel.org> ==================== Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-23wifi: cfg80211: add tracing for wiphy workJohannes Berg1-0/+74
Add trace events to trace when wiphy works are queued (or delayed ones scheduled), and other APIs are called. Also add an event when the worker starts, before acquiring the mutex, to be able to see potential delays due to locking. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Benjamin Berg <benjamin.berg@intel.com> Link: https://msgid.link/20240506210002.bf1840a1d22d.I4abba048c1c4017345640219cf1384a0b2288dd3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: cfg80211: sort trace events againJohannes Berg1-69/+69
They were meant to be split into ops and APIs, but some ops were added in the wrong place. Fix that. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506210002.0b3a86a5d8d7.I5591c03223bdb95597e181de63a2eded424de34c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23tracing/treewide: Remove second parameter of __assign_str()Steven Rostedt (Google)1-1/+1
With the rework of how the __string() handles dynamic strings where it saves off the source string in field in the helper structure[1], the assignment of that value to the trace event field is stored in the helper value and does not need to be passed in again. This means that with: __string(field, mystring) Which use to be assigned with __assign_str(field, mystring), no longer needs the second parameter and it is unused. With this, __assign_str() will now only get a single parameter. There's over 700 users of __assign_str() and because coccinelle does not handle the TRACE_EVENT() macro I ended up using the following sed script: git grep -l __assign_str | while read a ; do sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file; mv /tmp/test-file $a; done I then searched for __assign_str() that did not end with ';' as those were multi line assignments that the sed script above would fail to catch. Note, the same updates will need to be done for: __assign_str_len() __assign_rel_str() __assign_rel_str_len() I tested this with both an allmodconfig and an allyesconfig (build only for both). [1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/ Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts. Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs Tested-by: Guenter Roeck <linux@roeck-us.net>
2024-05-03wifi: cfg80211: handle color change per linkAditya Kumar Singh1-2/+4
Currently, during color change, no link id information is passed down. In order to support color change during Multi Link Operation, it is required to pass link id as well. Additionally, update notification APIs to allow drivers/mac80211 to pass the link ID. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240422053412.2024075-2-quic_adisi@quicinc.com Link: https://msgid.link/20240422053412.2024075-3-quic_adisi@quicinc.com [squash, actually only pass 0 from mac80211] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-08wifi: cfg80211: fix the order of arguments for trace events of the tx_rx_evt ↵Igor Artemiev1-2/+2
class The declarations of the tx_rx_evt class and the rdev_set_antenna event use the wrong order of arguments in the TP_ARGS macro. Fix the order of arguments in the TP_ARGS macro. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Igor Artemiev <Igor.A.Artemiev@mcst.ru> Link: https://msgid.link/20240405152431.270267-1-Igor.A.Artemiev@mcst.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: cfg80211: fix rdev_dump_mpp() arguments orderIgor Artemiev1-1/+1
Fix the order of arguments in the TP_ARGS macro for the rdev_dump_mpp tracepoint event. Found by Linux Verification Center (linuxtesting.org). Signed-off-by: Igor Artemiev <Igor.A.Artemiev@mcst.ru> Link: https://msgid.link/20240311164519.118398-1-Igor.A.Artemiev@mcst.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04wifi: cfg80211: print flags in tracing in hexJohannes Berg1-5/+5
It's confusing to see decimal, e.g. 20, here. Printing the flags in hex (0x14 == 20) is much clearer. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240228094254.5f7f4ab2e137.Id5e665104bbc51377b4591289e32f8c1d4711dce@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-12wifi: cfg80211: add support for link id attribute in NL80211_CMD_DEL_STATIONAditya Kumar Singh1-2/+5
Currently whenever NL80211_CMD_DEL_STATION command is called without any MAC address, all stations present on that interface are flushed. However with MLO there is a need to flush such stations only which are using at least a particular link from the AP MLD interface. For example - 2 GHz and 5 GHz are part of an AP MLD. To this interface, following stations are connected - 1. One non-EHT STA on 2 GHz link. 2. One non-EHT STA on 5 GHz link. 3. One Multi-Link STA having 2 GHz and 5 GHz as active links. Now if currently, NL80211_CMD_DEL_STATION is issued by the 2 GHz link without any MAC address, it would flush all station entries. However, flushing of station entry #2 at least is not desireable since it is connected to 5 GHz link alone. Hence, add an option to pass link ID as well in the command so that if link ID is passed, stations using that passed link ID alone would be flushed and others will not. So after this, station entries #1 and #3 alone would be flushed and #2 will remain as it is. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240205162952.1697646-2-quic_adisi@quicinc.com [clarify documentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: cfg80211: send link id in channel_switch opsAditya Kumar Singh1-2/+5
Currently, during channel switch, no link id information is passed down. In order to support channel switch during Multi Link Operation, it is required to pass link id as well. Add changes to pass link id in the channel_switch cfg80211_ops. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240130140918.1172387-2-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: cfg80211/mac80211: move puncturing into chandefJohannes Berg1-19/+19
Aloka originally suggested that puncturing should be part of the chandef, so that it's treated correctly. At the time, I disagreed and it ended up not part of the chandef, but I've now realized that this was wrong. Even for clients, the RX, and perhaps more importantly, CCA configuration needs to take puncturing into account. Move puncturing into the chandef, and adjust all the code accordingly. Also add a few tests for puncturing in chandef compatibility checking. Link: https://lore.kernel.org/linux-wireless/20220214223051.3610-1-quic_alokad@quicinc.com/ Suggested-by: Aloka Dixit <quic_alokad@quicinc.com> Link: https://msgid.link/20240129194108.307183a5d2e5.I4d7fe2f126b2366c1312010e2900dfb2abffa0f6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12wifi: cfg80211: Add support for setting TID to link mappingIlan Peer1-0/+20
Add support for setting the TID to link mapping for a non-AP MLD station. This is useful in cases user space needs to restrict the possible set of active links, e.g., since it got a BSS Transition Management request forcing to use only a subset of the valid links etc. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231211085121.da4d56a5f3ff.Iacf88e943326bf9c169c49b728c4a3445fdedc97@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-06wifi: cfg80211: make RX assoc data constJohannes Berg1-1/+1
This is just a collection of data and we only read it, so make it const. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: mac80211: rename struct cfg80211_rx_assoc_resp to ↵Kalle Valo1-1/+1
cfg80211_rx_assoc_resp_data make htmldocs warns: Documentation/driver-api/80211/cfg80211:48: ./include/net/cfg80211.h:7290: WARNING: Duplicate C declaration, also defined at cfg80211:7251. Declaration is '.. c:function:: void cfg80211_rx_assoc_resp (struct net_device *dev, struct cfg80211_rx_assoc_resp *data)'. This is because there's a function named cfg80211_rx_assoc_resp() and a struct named cfg80211_rx_assoc_resp, see previous patch for more info. To workaround this rename the struct to cfg80211_rx_assoc_resp_data. The parameter for the function is named 'data' anyway so the naming here is consistent. Compile tested only. Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231012114229.2931808-3-kvalo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-26wifi: cfg80211: add local_state_change to deauth traceJohannes Berg1-2/+4
Add the local_state_change request to the deauth trace for easier debugging. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-25wifi: cfg80211: split struct cfg80211_ap_settingsJohannes Berg1-1/+1
Using the full struct cfg80211_ap_settings for an update is misleading, since most settings cannot be updated. Split the update case off into a new struct cfg80211_ap_update. Change-Id: I3ba4dd9280938ab41252f145227a7005edf327e4 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-13wifi: cfg80211: modify prototype for change_beaconAloka Dixit1-38/+36
Modify the prototype for change_beacon() in struct cfg80211_op to accept cfg80211_ap_settings instead of cfg80211_beacon_data so that it can process data in addition to beacons. Modify the prototypes of ieee80211_change_beacon() and driver specific functions accordingly. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20230727174100.11721-4-quic_alokad@quicinc.com [while at it, remove pointless "if (info)" check in tracing that just makes all the lines longer than they need be - it's never NULL] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-13wifi: cfg80211: remove scan_width supportJohannes Berg1-4/+2
There really isn't any support for scanning at different channel widths than 20 MHz since there's no way to set it. Remove this support for now, if somebody wants to maintain this whole thing later we can revisit how it should work. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: cfg80211/nl80211: Add support to indicate STA MLD setup links removalVeerendranath Jakkam1-0/+15
STA MLD setup links may get removed if AP MLD remove the corresponding affiliated APs with Multi-Link reconfiguration as described in P802.11be_D3.0, section 35.3.6.2.2 Removing affiliated APs. Currently, there is no support to notify such operation to cfg80211 and userspace. Add support for the drivers to indicate STA MLD setup links removal to cfg80211 and notify the same to userspace. Upon receiving such indication from the driver, clear the MLO links information of the removed links in the WDEV. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230317142153.237900-1-quic_vjakkam@quicinc.com [rename function and attribute, fix kernel-doc] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: cfg80211: add inform_bss op to update BSSBenjamin Berg1-0/+17
This new function is called from within the inform_bss(_frame)_data functions in order for the driver to update data that it is tracking. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230616094949.8d7781b0f965.I80041183072b75c081996a1a5a230b34aff5c668@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: cfg80211: make TDLS management link-awareMukesh Sisodiya1-5/+8
For multi-link operation(MLO) TDLS management frames need to be transmitted on a specific link. The TDLS setup request will add BSSID along with peer address and userspace will pass the link-id based on BSSID value to the driver(or mac80211). Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230616094948.cb3d87c22812.Ia3d15ac4a9a182145bf2d418bcb3ddf4539cd0a7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-14wifi: cfg80211: replace strlcpy() with strscpy()Azeem Shaikh1-1/+1
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). Direct replacement is safe here since WIPHY_ASSIGN is only used by TRACE macros and the return values are ignored. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230612232301.2572316-1-azeemshaikh38@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: cfg80211/mac80211: report link ID on control port RXJohannes Berg1-4/+7
For control port RX, report the link ID for MLO. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.fe06dfc3791b.Iddcab94789cafe336417be406072ce8a6312fc2d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: nl80211: add a command to enable/disable HW timestampingAvraham Stern1-0/+25
Add a command to enable and disable HW timestamping of TM and FTM frames. HW timestamping can be enabled for a specific mac address or for all addresses. The low level driver will indicate how many peers HW timestamping can be enabled concurrently, and this information will be passed to userspace. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.05678d7b1c17.Iccc08869ea8156f1c71a3111a47f86dd56234bd0@changeid [switch to needing netdev UP, minor edits] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: include puncturing bitmap in channel switch eventsAloka Dixit1-8/+16
Add puncturing bitmap in channel switch notifications and corresponding trace functions. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Link: https://lore.kernel.org/r/20230131001227.25014-4-quic_alokad@quicinc.com [fix qtnfmac] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: Extend cfg80211_update_owe_info_event() for MLD APVeerendranath Jakkam1-14/+24
Add support to offload OWE processing to user space for MLD AP when driver's SME in use. Add new parameters in struct cfg80211_update_owe_info to provide below information in cfg80211_update_owe_info_event() call: - MLO link ID of the AP, with which station requested (re)association. This is applicable for both MLO and non-MLO station connections when the AP affiliated with an MLD. - Station's MLD address if the connection is MLO capable. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230126143256.960563-3-quic_vjakkam@quicinc.com [reformat the trace event macro] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: Authentication offload to user space for MLO connection in ↵Veerendranath Jakkam1-2/+5
STA mode Currently authentication request event interface doesn't have support to indicate the user space whether it should enable MLO or not during the authentication with the specified AP. But driver needs such capability since the connection is MLO or not decided by the driver in case of SME offload to the driver. Add support for driver to indicate MLD address of the AP in authentication offload request to inform user space to enable MLO during authentication process. Driver shall look at NL80211_ATTR_MLO_SUPPORT flag capability in NL80211_CMD_CONNECT to know whether the user space supports enabling MLO during the authentication offload. User space should enable MLO during the authentication only when it receives the AP MLD address in authentication offload request. User space shouldn't enable MLO if the authentication offload request doesn't indicate the AP MLD address even if the AP is MLO capable. When MLO is enabled, user space should use the MAC address of the interface (on which driver sent request) as self MLD address. User space and driver to use MLD addresses in RA, TA and BSSID fields of the frames between them, and driver translates the MLD addresses to/from link addresses based on the link chosen for the authentication. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230116125058.1604843-1-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: trace: remove MAC_PR_{FMT,ARG}Johannes Berg1-124/+120
With %pM, this really is no longer needed, and actually longer to spell out. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: cfg80211: Add link_id to cfg80211_ch_switch_started_notify()Veerendranath Jakkam1-4/+7
Add link_id parameter to cfg80211_ch_switch_started_notify() to allow driver to indicate on which link channel switch started on MLD. Send the data to userspace so it knows as well. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20220722131143.3438042-1-quic_vjakkam@quicinc.com Link: https://lore.kernel.org/r/20220722131143.3438042-2-quic_vjakkam@quicinc.com [squash two patches] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: cfg80211: Add link_id parameter to various key operations for MLOVeerendranath Jakkam1-34/+52
Add support for various key operations on MLD by adding new parameter link_id. Pass the link_id received from userspace to driver for add_key, get_key, del_key, set_default_key, set_default_mgmt_key and set_default_beacon_key to support configuring keys specific to each MLO link. Userspace must not specify link ID for MLO pairwise key since it is common for all the MLO links. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20220730052643.1959111-4-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: cfg80211/nl80211: move rx management data into a structAvraham Stern1-4/+4
The functions for reporting rx management take many arguments. Collect all the arguments into a struct, which also make it easier to add more arguments if needed. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211/mac80211: Support control port TX from specific linkAndrei Otcheretianski1-4/+7
In case of authentication with a legacy station, link addressed EAPOL frames should be sent. Support it. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211: extend cfg80211_rx_assoc_resp() for MLOJohannes Berg1-8/+8
Extend the cfg80211_rx_assoc_resp() to cover multiple BSSes, the AP MLD address and local link addresses for MLO. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211: adjust assoc comeback for MLOJohannes Berg1-5/+5
We only report the BSSID to userspace, so change the argument from BSS struct pointer to AP address, which we'll use to carry either the BSSID or AP MLD address. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211: prepare association failure APIs for MLOJohannes Berg1-3/+16
For MLO, we need the ability to report back multiple BSS structures to release, as well as the AP MLD address (if attempting to make an MLO connection). Unify cfg80211_assoc_timeout() and cfg80211_abandon_assoc() into a new cfg80211_assoc_failure() that gets a structure parameter with the necessary data. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211: remove BSS pointer from cfg80211_disassoc_requestJohannes Berg1-4/+1
The race described by the comment in mac80211 hasn't existed since the locking rework to use the same lock and for MLO we need to pass the AP MLD address, so just pass the BSSID or AP MLD address instead of the BSS struct pointer, and adjust all the code accordingly. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211: drop BSS elements from assoc trace for nowJohannes Berg1-11/+2
For multi-link operation, this cannot work as the req->bss pointer will be NULL, and we'll need to do more work on this to really add tracing for the MLO case here. Drop the BSS elements for now as they're not the most useful thing, and it's hard to size things correctly for the MLO case (without adding a lot of code that's also executed when tracing isn't enabled.) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211/mac80211: separate link params from station paramsShaul Triebitz1-10/+14
Put the link_station_parameters structure in the station_parameters structure (and remove the station_parameters fields already existing in link_station_parameters). Now, for an MLD station, the default link is added together with the station. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211: add API to add/modify/remove a link stationShaul Triebitz1-0/+97
Add an API for adding/modifying/removing a link of a station. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: cfg80211: add optional link add/remove callbacksJohannes Berg1-1/+19
Add some optional callbacks for link add/remove so that drivers can react here. Initially, I thought it would be sufficient to just create the link in start_ap etc., but it turns out that's not so simple, since there are quite a few callbacks that can be called: if they're erroneously without start_ap, things might crash. Thus it might be easier for drivers to allocate all the necessary data structures immediately, to not have to worry about it in each callback, since cfg80211 checks that the link ID is valid (has been added.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: cfg80211: sort trace.hJohannes Berg1-137/+137
We wanted to have this sorted by direction (to/from driver), but didn't maintain that well. Sort the file now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: cfg80211: do some rework towards MLO link APIsJohannes Berg1-21/+65
In order to support multi-link operation with multiple links, start adding some APIs. The notable addition here is to have the link ID in a new nl80211 attribute, that will be used to differentiate the links in many nl80211 operations. So far, this patch adds the netlink NL80211_ATTR_MLO_LINK_ID attribute (as well as the NL80211_ATTR_MLO_LINKS attribute) and plugs it through the system in some places, checking the validity etc. along with other infrastructure needed for it. For now, I've decided to include only the over-the-air link ID in the API. I know we discussed that we eventually need to have to have other ways of identifying a link, but for local AP mode and auth/assoc commands as well as set_key etc. we'll use the OTA ID. Also included in this patch is some refactoring of the data structures in struct wireless_dev, splitting for the first time the data into type dependent pieces, to make reasoning about these things easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20cfg80211: rename offchannel_chain structs to background_chain to avoid ↵Lorenzo Bianconi1-1/+1
confusion with ETSI standard ETSI standard defines "Offchannel CAC" as: "Off-Channel CAC is performed by a number of non-continuous checks spread over a period in time. This period, which is required to determine the presence of radar signals, is defined as the Off-Channel CAC Time.. Minimum Off-Channel CAC Time 6 minutes and Maximum Off-Channel CAC Time 4 hours..". mac80211 implementation refers to a dedicated hw chain used for continuous radar monitoring. Rename offchannel_* references to background_* in order to avoid confusion with ETSI standard. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/4204cc1d648d76b44557981713231e030a3bd991.1638190762.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20cfg80211: Add support for notifying association comebackIlan Peer1-0/+17
Thought the underline driver MLME can handle association temporal rejection with comeback, it is still useful to notify this to user space, as user space might want to handle the temporal rejection differently. For example, in case the comeback time is too long, user space can deauthenticate immediately and try to associate with a different AP. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.2467809e8cb3.I45574185b582666bc78eef0c29a4c36b478e5382@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-26cfg80211: schedule offchan_cac_abort_wk in cfg80211_radar_eventLorenzo Bianconi1-4/+7
If necessary schedule offchan_cac_abort_wk work in cfg80211_radar_event routine adding offchan parameter to cfg80211_radar_event signature. Rename cfg80211_radar_event in __cfg80211_radar_event and introduce the two following inline helpers: - cfg80211_radar_event - cfg80211_offchan_radar_event Doing so the drv will not need to run cfg80211_offchan_cac_abort() after radar detection on the offchannel chain. Tested-by: Owen Peng <owen.peng@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/3ff583e021e3343a3ced54a7b09b5e184d1880dc.1637062727.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-19cfg80211: implement APIs for dedicated radar detection HWLorenzo Bianconi1-0/+19
If a dedicated (off-channel) radar detection hardware (chain) is available in the hardware/driver, allow this to be used by calling the NL80211_CMD_RADAR_DETECT command with a new flag attribute requesting off-channel radar detection is used. Offchannel CAC (channel availability check) avoids the CAC downtime when switching to a radar channel or when turning on the AP. Drivers advertise support for this using the new feature flag NL80211_EXT_FEATURE_RADAR_OFFCHAN. Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/7468e291ef5d05d692c1738d25b8f778d8ea5c3f.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/1e60e60fef00e14401adae81c3d49f3e5f307537.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/85fa50f57fc3adb2934c8d9ca0be30394de6b7e8.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/4b6c08671ad59aae0ac46fc94c02f31b1610eb72.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/241849ccaf2c228873c6f8495bf87b19159ba458.1634979655.git.lorenzo@kernel.org [remove offchan_mutex, fix cfg80211_stop_offchan_radar_detection(), remove gfp_t argument, fix documentation, fix tracing] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-09-27cfg80211: AP mode driver offload for FILS association cryptoSubrat Mishra1-0/+31
Add a driver FILS crypto offload extended capability flag to indicate that the driver running in AP mode is capable of handling encryption and decryption of (Re)Association request and response frames. Add a command to set FILS AAD data to driver. This feature is supported on drivers running in AP mode only. This extended capability is exchanged with hostapd during cfg80211 init. If the driver indicates this capability, then before sending the Authentication response frame, hostapd sets FILS AAD data to the driver. This allows the driver to decrypt (Re)Association Request frame and encrypt (Re)Association Response frame. FILS Key derivation will still be done in hostapd. Signed-off-by: Subrat Mishra <subratm@codeaurora.org> Link: https://lore.kernel.org/r/1631685143-13530-1-git-send-email-subratm@codeaurora.org [fix whitespace] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-19 04:34:25 +0300