summaryrefslogtreecommitdiff
path: root/net/wireless/rdev-ops.h
AgeCommit message (Collapse)AuthorFilesLines
2021-12-20cfg80211: rename offchannel_chain structs to background_chain to avoid ↵Lorenzo Bianconi1-5/+5
confusion with ETSI standard ETSI standard defines "Offchannel CAC" as: "Off-Channel CAC is performed by a number of non-continuous checks spread over a period in time. This period, which is required to determine the presence of radar signals, is defined as the Off-Channel CAC Time.. Minimum Off-Channel CAC Time 6 minutes and Maximum Off-Channel CAC Time 4 hours..". mac80211 implementation refers to a dedicated hw chain used for continuous radar monitoring. Rename offchannel_* references to background_* in order to avoid confusion with ETSI standard. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/4204cc1d648d76b44557981713231e030a3bd991.1638190762.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-19cfg80211: implement APIs for dedicated radar detection HWLorenzo Bianconi1-0/+17
If a dedicated (off-channel) radar detection hardware (chain) is available in the hardware/driver, allow this to be used by calling the NL80211_CMD_RADAR_DETECT command with a new flag attribute requesting off-channel radar detection is used. Offchannel CAC (channel availability check) avoids the CAC downtime when switching to a radar channel or when turning on the AP. Drivers advertise support for this using the new feature flag NL80211_EXT_FEATURE_RADAR_OFFCHAN. Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/7468e291ef5d05d692c1738d25b8f778d8ea5c3f.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/1e60e60fef00e14401adae81c3d49f3e5f307537.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/85fa50f57fc3adb2934c8d9ca0be30394de6b7e8.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/4b6c08671ad59aae0ac46fc94c02f31b1610eb72.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/241849ccaf2c228873c6f8495bf87b19159ba458.1634979655.git.lorenzo@kernel.org [remove offchan_mutex, fix cfg80211_stop_offchan_radar_detection(), remove gfp_t argument, fix documentation, fix tracing] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-09-27cfg80211: AP mode driver offload for FILS association cryptoSubrat Mishra1-0/+14
Add a driver FILS crypto offload extended capability flag to indicate that the driver running in AP mode is capable of handling encryption and decryption of (Re)Association request and response frames. Add a command to set FILS AAD data to driver. This feature is supported on drivers running in AP mode only. This extended capability is exchanged with hostapd during cfg80211 init. If the driver indicates this capability, then before sending the Authentication response frame, hostapd sets FILS AAD data to the driver. This allows the driver to decrypt (Re)Association Request frame and encrypt (Re)Association Response frame. FILS Key derivation will still be done in hostapd. Signed-off-by: Subrat Mishra <subratm@codeaurora.org> Link: https://lore.kernel.org/r/1631685143-13530-1-git-send-email-subratm@codeaurora.org [fix whitespace] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-08-17nl80211: add support for BSS coloringJohn Crispin1-0/+13
This patch adds support for BSS color collisions to the wireless subsystem. Add the required functionality to nl80211 that will notify about color collisions, triggering the color change and notifying when it is completed. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/500b3582aec8fe2c42ef46f3117b148cb7cbceb5.1625247619.git.lorenzo@kernel.org [remove unnecessary NULL initialisation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23cfg80211: trace more information in assoc trace eventJohannes Berg1-1/+11
Add more information to the assoc trace event so we can see more precisely what's going on and what options were used. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.86c58fca486d.Iabd8f036d2ef1d770fd20ed3ccd149f32154f430@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11nl80211: add common API to configure SAR power limitationsCarl Huang1-0/+12
NL80211_CMD_SET_SAR_SPECS is added to configure SAR from user space. NL80211_ATTR_SAR_SPEC is used to pass the SAR power specification when used with NL80211_CMD_SET_SAR_SPECS. Wireless driver needs to register SAR type, supported frequency ranges to wiphy, so user space can query it. The index in frequency range is used to specify which sub band the power limitation applies to. The SAR type is for compatibility, so later other SAR mechanism can be implemented without breaking the user space SAR applications. Normal process is user space queries the SAR capability, and gets the index of supported frequency ranges and associates the power limitation with this index and sends to kernel. Here is an example of message send to kernel: 8c 00 00 00 08 00 01 00 00 00 00 00 38 00 2b 81 08 00 01 00 00 00 00 00 2c 00 02 80 14 00 00 80 08 00 02 00 00 00 00 00 08 00 01 00 38 00 00 00 14 00 01 80 08 00 02 00 01 00 00 00 08 00 01 00 48 00 00 00 NL80211_CMD_SET_SAR_SPECS: 0x8c NL80211_ATTR_WIPHY: 0x01(phy idx is 0) NL80211_ATTR_SAR_SPEC: 0x812b (NLA_NESTED) NL80211_SAR_ATTR_TYPE: 0x00 (NL80211_SAR_TYPE_POWER) NL80211_SAR_ATTR_SPECS: 0x8002 (NLA_NESTED) freq range 0 power: 0x38 in 0.25dbm unit (14dbm) freq range 1 power: 0x48 in 0.25dbm unit (18dbm) Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Abhishek Kumar <kuabhs@chromium.org> Link: https://lore.kernel.org/r/20201203103728.3034-2-cjhuang@codeaurora.org [minor edits, NLA parse cleanups] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-11cfg80211: remove WDS codeJohannes Berg1-10/+0
Remove all the code that was there to configure WDS interfaces, now that there's no way to reach it anymore. Link: https://lore.kernel.org/r/20201109105103.8f5b98e4068d.I5f5129041649ef2862b69683574bb3344743727b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27nl80211: add ability to report TX status for control port TXMarkus Theil1-3/+6
This adds the necessary capabilities in nl80211 to allow drivers to assign a cookie to control port TX frames (returned via extack in the netlink ACK message of the command) and then later report the frame's status. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200508144202.7678-2-markus.theil@tu-ilmenau.de [use extack cookie instead of explicit message, recombine patches] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24cfg80211: change internal management frame registration APIJohannes Berg1-4/+7
Almost all drivers below cfg80211 get the API wrong (except for cfg80211) and are unable to cope with multiple registrations for the same frame type, which is valid due to the match filter. This seems to indicate the API is wrong, and we should maintain the full information in cfg80211 instead of the drivers. Change the API to no longer inform the driver about individual registrations and unregistrations, but rather every time about the entire state of the entire wiphy and single wdev, whenever it may have changed. This also simplifies the code in cfg80211 as it no longer has to track exactly what was unregistered and can free things immediately. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200417124300.f47f3828afc8.I7f81ef59c2c5a340d7075fb3c6d0e08e8aeffe07@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-24nl80211: modify TID-config APIJohannes Berg1-4/+4
Make some changes to the TID-config API: * use u16 in nl80211 (only, and restrict to using 8 bits for now), to avoid issues in the future if we ever want to use higher TIDs. * reject empty TIDs mask (via netlink policy) * change feature advertising to not use extended feature flags but have own mechanism for this, which simplifies the code * fix all variable names from 'tid' to 'tids' since it's a mask * change to cfg80211_ name prefixes, not ieee80211_ * fix some minor docs/spelling things. Change-Id: Ia234d464b3f914cdeab82f540e018855be580dce Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-24nl80211: Add NL command to support TID speicific configurationsTamizh chelvam1-0/+24
Add the new NL80211_CMD_SET_TID_CONFIG command to support data TID specific configuration. Per TID configuration is passed in the nested NL80211_ATTR_TID_CONFIG attribute. This patch adds support to configure per TID noack policy through the NL80211_TID_CONFIG_ATTR_NOACK attribute. Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org> Link: https://lore.kernel.org/r/1579506687-18296-2-git-send-email-tamizhr@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-24cfg80211: Support key configuration for Beacon protection (BIGTK)Jouni Malinen1-0/+13
IEEE P802.11-REVmd/D3.0 adds support for protecting Beacon frames using a new set of keys (BIGTK; key index 6..7) similarly to the way group-addressed Robust Management frames are protected (IGTK; key index 4..5). Extend cfg80211 and nl80211 to allow the new BIGTK to be configured. Add an extended feature flag to indicate driver support for the new key index values to avoid array overflows in driver implementations and also to indicate to user space when this functionality is available. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20200222132548.20835-2-jouni@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-24Revert "nl80211: add src and dst addr attributes for control port tx/rx"Johannes Berg1-4/+4
This reverts commit 8c3ed7aa2b9ef666195b789e9b02e28383243fa8. As Jouni points out, there's really no need for this, since the RSN pre-authentication frames are normal data frames, not port control frames (locally). We can still revert this now since it hasn't actually gone beyond -next. Fixes: 8c3ed7aa2b9e ("nl80211: add src and dst addr attributes for control port tx/rx") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200224101910.b746e263287a.I9eb15d6895515179d50964dec3550c9dc784bb93@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-17Merge tag 'mac80211-next-for-net-next-2020-02-14' of ↵David S. Miller1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== A few big new things: * 802.11 frame encapsulation offload support * more HE (802.11ax) support, including some for 6 GHz band * powersave in hwsim, for better testing Of course as usual there are various cleanups and small fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07nl80211: add src and dst addr attributes for control port tx/rxMarkus Theil1-4/+4
When using control port over nl80211 in AP mode with pre-authentication, APs need to forward frames to other APs defined by their MAC address. Before this patch, pre-auth frames reaching user space over nl80211 control port have no longer any information about the dest attached, which can be used for forwarding to a controller or injecting the frame back to a ethernet interface over a AF_PACKET socket. Analog problems exist, when forwarding pre-auth frames from AP -> STA. This patch therefore adds the NL80211_ATTR_DST_MAC and NL80211_ATTR_SRC_MAC attributes to provide more context information when forwarding. The respective arguments are optional on tx and included on rx. Therefore unaware existing software is not affected. Software which wants to detect this feature, can do so by checking against: NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_MAC_ADDRS Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200115125522.3755-1-markus.theil@tu-ilmenau.de [split into separate cfg80211/mac80211 patches] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-15cfg80211: check for set_wiphy_paramsJohannes Berg1-0/+4
Check if set_wiphy_params is assigned and return an error if not, some drivers (e.g. virt_wifi where syzbot reported it) don't have it. Reported-by: syzbot+e8a797964a4180eb57d5@syzkaller.appspotmail.com Reported-by: syzbot+34b582cf32c1db008f8e@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200113125358.ac07f276efff.Ibd85ee1b12e47b9efb00a2adc5cd3fac50da791a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-15cfg80211: Fix radar event during another phy CACOrr Mazor1-0/+10
In case a radar event of CAC_FINISHED or RADAR_DETECTED happens during another phy is during CAC we might need to cancel that CAC. If we got a radar in a channel that another phy is now doing CAC on then the CAC should be canceled there. If, for example, 2 phys doing CAC on the same channels, or on comptable channels, once on of them will finish his CAC the other might need to cancel his CAC, since it is no longer relevant. To fix that the commit adds an callback and implement it in mac80211 to end CAC. This commit also adds a call to said callback if after a radar event we see the CAC is no longer relevant Signed-off-by: Orr Mazor <Orr.Mazor@tandemg.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20191222145449.15792-1-Orr.Mazor@tandemg.com [slightly reformat/reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26cfg80211: add support to probe unexercised mesh linkRajkumar Manoharan1-0/+13
Adding support to allow mesh HWMP to measure link metrics on unexercised direct mesh path by sending some data frames to other mesh points which are not currently selected as a primary traffic path but only 1 hop away. The absence of the primary path to the chosen node makes it necessary to apply some form of marking on a chosen packet stream so that the packets can be properly steered to the selected node for testing, and not by the regular mesh path lookup. Tested-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26nl80211/cfg80211: Extended Key ID supportAlexander Wetzel1-1/+2
Add support for IEEE 802.11-2016 "Extended Key ID for Individually Addressed Frames". Extend cfg80211 and nl80211 to allow pairwise keys to be installed for Rx only, enable Tx separately and allow Key ID 1 for pairwise keys. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> [use NLA_POLICY_RANGE() for NL80211_KEY_MODE] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-08cfg80211/nl80211: Offload OWE processing to user space in AP modeSunil Dutt1-0/+13
This interface allows the host driver to offload OWE processing to user space. This intends to support OWE (Opportunistic Wireless Encryption) AKM by the drivers that implement SME but rely on the user space for the cryptographic/OWE processing in AP mode. Such drivers are not capable of processing/deriving the DH IE. A new NL80211 command - NL80211_CMD_UPDATE_OWE_INFO is introduced to send the request/event between the host driver and user space. Driver shall provide the OWE info (MAC address and DH IE) of the peer to user space for cryptographic processing of the DH IE through the event. Accordingly, the user space shall update the OWE info/DH IE to the driver. Following is the sequence in AP mode for OWE authentication. Driver passes the OWE info obtained from the peer in the Association Request to the user space through the event cfg80211_update_owe_info_event. User space shall process the OWE info received and generate new OWE info. This OWE info is passed to the driver through NL80211_CMD_UPDATE_OWE_INFO request. Driver eventually uses this OWE info to send the Association Response to the peer. This OWE info in the command interface carries the IEs that include PMKID of the peer if the PMKSA is still valid or an updated DH IE for generating a new PMKSA with the peer. Signed-off-by: Liangwei Dong <liangwei@codeaurora.org> Signed-off-by: Sunil Dutt <usdutt@codeaurora.org> Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org> [remove policy initialization - no longer exists] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-09cfg80211: add peer measurement with FTM initiator APIJohannes Berg1-0/+25
Add a new "peer measurement" API, that can be used to measure certain things related to a peer. Right now, only implement FTM (flight time measurement) over it, but the idea is that it'll be extensible to also support measuring the necessary things to calculate e.g. angle-of-arrival for WiGig. The API is structured to have a generic list of peers and channels to measure with/on, and then for each of those a set of measurements (again, only FTM right now) to perform. Results are sent to the requesting socket, including a final complete message. Closing the controlling netlink socket will abort a running measurement. v3: - add a bit to report "final" for partial results - remove list keeping etc. and just unicast out the results to the requester (big code reduction ...) - also send complete message unicast, and as a result remove the multicast group - separate out struct cfg80211_pmsr_ftm_request_peer from struct cfg80211_pmsr_request_peer - document timeout == 0 if no timeout - disallow setting timeout nl80211 attribute to 0, must not include attribute for no timeout - make MAC address randomization optional - change num bursts exponent default to 0 (1 burst, rather rather than the old default of 15==don't care) v4: - clarify NL80211_ATTR_TIMEOUT documentation v5: - remove unnecessary nl80211 multicast/family changes - remove partial results bit/flag, final is sufficient - add max_bursts_exponent, max_ftms_per_burst to capability - rename "frames per burst" -> "FTMs per burst" v6: - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down() and call it in leave, so the device can't go down with any pending measurements v7: - wording fixes (Lior) - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior) v8: - copyright statements - minor coding style fixes - fix error path leak Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02cfg80211: support FTM responder configuration/statisticsPradeep Kumar Chitrapu1-0/+15
Allow userspace to enable fine timing measurement responder functionality with configurable lci/civic parameters in AP mode. This can be done at AP start or changing beacon parameters. A new EXT_FEATURE flag is introduced for drivers to advertise the capability. Also nl80211 API support for retrieving statistics is added. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> [remove unused cfg80211_ftm_responder_params, clarify docs, move validation into policy] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-08cfg80211: Expose TXQ stats and parameters to userspaceToke Høiland-Jørgensen1-0/+12
This adds support for exporting the mac80211 TXQ stats via nl80211 by way of a nested TXQ stats attribute, as well as for configuring the quantum and limits that were previously only changeable through debugfs. This commit adds just the nl80211 API, a subsequent commit adds support to mac80211 itself. Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29nl80211: Implement TX of control port framesDenis Kenzior1-0/+15
This commit implements the TX side of NL80211_CMD_CONTROL_PORT_FRAME. Userspace provides the raw EAPoL frame using NL80211_ATTR_FRAME. Userspace should also provide the destination address and the protocol type to use when sending the frame. This is used to implement TX of Pre-authentication frames. If CONTROL_PORT_ETHERTYPE_NO_ENCRYPT is specified, then the driver will be asked not to encrypt the outgoing frame. A new EXT_FEATURE flag is introduced so that nl80211 code can check whether a given wiphy has capability to pass EAPoL frames over nl80211. Signed-off-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-01-31cfg80211/nl80211: Optional authentication offload to userspaceSrinivas Dasari1-0/+15
This interface allows the host driver to offload the authentication to user space. This is exclusively defined for host drivers that do not define separate commands for authentication and association, but rely on userspace SME (e.g., in wpa_supplicant for the ~WPA_DRIVER_FLAGS_SME case) for the authentication to happen. This can be used to implement SAE without full implementation in the kernel/firmware while still being able to use NL80211_CMD_CONNECT with driver-based BSS selection. Host driver sends NL80211_CMD_EXTERNAL_AUTH event to start/abort authentication to the port on which connect is triggered and status of authentication is further indicated by user space to host driver through the same command response interface. User space entities advertise this capability through the NL80211_ATTR_EXTERNAL_AUTH_SUPP flag in the NL80211_CMD_CONNECT request. Host drivers shall look at this capability to offload the authentication. Signed-off-by: Srinivas Dasari <dasaris@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> [add socket connection ownership check] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13cfg80211: support 4-way handshake offloading for 802.1XAvraham Stern1-0/+25
Add API for setting the PMK to the driver. For FT support, allow setting also the PMK-R0 Name. This can be used by drivers that support 4-Way handshake offload while IEEE802.1X authentication is managed by upper layers. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> [arend.vanspriel@broadcom.com: add WANT_1X_4WAY_HS attribute] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> [reword NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X docs a bit to say that the device may require it] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-27cfg80211: add request id parameter to .sched_scan_stop() signatureArend Van Spriel1-3/+3
For multiple scheduled scan support the driver needs to know which scheduled scan request is being stopped. Pass the request id in the .sched_scan_stop() callback. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-27nl80211: allow multiple active scheduled scan requestsArend Van Spriel1-1/+1
This patch implements the idea to have multiple scheduled scan requests running concurrently. It mainly illustrates how to deal with the incoming request from user-space in terms of backward compatibility. In order to use multiple scheduled scans user-space needs to provide a flag attribute NL80211_ATTR_SCHED_SCAN_MULTI to indicate support. If not the request is treated as a legacy scan. Drivers currently supporting scheduled scan are now indicating they support a single scheduled scan request. This obsoletes WIPHY_FLAG_SUPPORTS_SCHED_SCAN. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> [clean up netlink destroy path to avoid allocations, code cleanups] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-13cfg80211: move add/change interface monitor flags into paramsJohannes Berg1-5/+4
Instead passing both flags, which can be NULL, and vif_params, which are never NULL, move the flags into the vif_params and use BIT(0), which is invalid from userspace, to indicate that the flags were changed. While updating all drivers, fix a small bug in wil6210 where it was setting the flags to 0 instead of leaving them unchanged. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-06cfg80211: Accept multiple RSSI thresholds for CQMAndrew Zaborowski1-0/+12
Change the SET CQM command's RSSI threshold attribute to accept any number of thresholds as a sorted array. The API should be backwards compatible so that if one s32 threshold value is passed, the old mechanism is enabled. The netlink event generated is the same in both cases. cfg80211 handles an arbitrary number of RSSI thresholds but drivers have to provide a method (set_cqm_rssi_range_config) that configures a range set by a high and a low value. Drivers have to call back when the RSSI goes out of that range and there's no additional event for each time the range is reconfigured as there was with the current one-threshold API. This method doesn't have a hysteresis parameter because there's no benefit to the cfg80211 code from having the hysteresis be handled by hardware/driver in terms of the number of wakeups. At the same time it would likely be less consistent between drivers if offloaded or done in the drivers. Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-27cfg80211: Add support to update connection parametersvamsi krishna1-0/+12
Add functionality to update the connection parameters when in connected state, so that driver/firmware uses the updated parameters for subsequent roaming. This is for drivers that support internal BSS selection and roaming. The new command does not change the current association state, i.e., it can be used to update IE contents for future (re)associations without causing an immediate disassociation or reassociation with the current BSS. This commit implements the required functionality for updating IEs for (Re)Association Request frame only. Other parameters can be added in future when required. Signed-off-by: vamsi krishna <vamsin@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-27cfg80211: configure multicast to unicast for AP interfacesMichael Braun1-0/+12
Add the ability to configure if an AP (and associated VLANs) will do multicast-to-unicast conversion for ARP, IPv4 and IPv6 frames (possibly within 802.1Q). If enabled, such frames are to be sent to each station separately, with the DA replaced by their own MAC address rather than the group address. Note that this may break certain expectations of the receiver, such as the ability to drop unicast IP packets received within multicast L2 frames, or the ability to not send ICMP destination unreachable messages for packets received in L2 multicast (which is required, but the receiver can't tell the difference if this new option is enabled.) This also doesn't implement the 802.11 DMS (directed multicast service). Signed-off-by: Michael Braun <michael-dev@fami-braun.de> [fix disabling, add better documentation & commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-30cfg80211: allow the user space to change current NAN configurationAyala Beker1-0/+17
Some NAN configuration paramaters may change during the operation of the NAN device. For example, a user may want to update master preference value when the device gets plugged/unplugged to the power. Add API that allows to do so. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-30cfg80211: add add_nan_func / del_nan_funcAyala Beker1-0/+21
A NAN function can be either publish, subscribe or follow up. Make all the necessary verifications and just pass the request to the driver. Allow the user space application that starts NAN to forbid any other socket to add or remove functions. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-30cfg80211: add start / stop NAN commandsAyala Beker1-0/+20
This allows user space to start/stop NAN interface. A NAN interface is like P2P device in a few aspects: it doesn't have a netdev associated to it. Add the new interface type and prevent operations that can't be executed on NAN interface like scan. Define several attributes that may be configured by user space when starting NAN functionality (master preference and dual band operation) Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-12cfg80211: remove enum ieee80211_bandJohannes Berg1-1/+1
This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04cfg80211: Add support for aborting an ongoing scanVidyullatha Kanchanapally1-0/+8
Implement new functionality for aborting an ongoing scan. Add NL80211_CMD_ABORT_SCAN to the nl80211 interface. After aborting the scan, driver shall provide the scan status by calling cfg80211_scan_done(). Reviewed-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Vidyullatha Kanchanapally <vkanchan@qti.qualcomm.com> Signed-off-by: Sunil Dutt <usdutt@qti.qualcomm.com> [change command to take wdev instead of netdev so that it can be used on p2p-device scans] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04cfg80211: Add missing tracing to cfg80211Ilan Peer1-0/+43
Add missing tracing for: 1. start_radar_detection() 2. set_mcast_rates() 3. set_coalesce() Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17cfg80211: allow mgmt_frame_register callback to sleepJohannes Berg1-0/+2
This callback is currently not allowed to sleep, which makes it more difficult to implement proper driver methods in mac80211 than it has to be. Instead of doing asynchronous work here in mac80211, make it possible for the callback to sleep by doing some asynchronous work in cfg80211. This also enables improvements to other drivers, like ath6kl, that would like to sleep in this callback. While at it, also fix the code to call the driver on the implicit unregistration when an interface is removed, and do that also when a P2P-Device wdev is destroyed (otherwise we leak the structs.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30cfg80211: pass name_assign_type to rdev_add_virtual_intf()Tom Gundersen1-2/+3
This will expose in /sys whether the ifname of a device is set by userspace or generated by the kernel. The latter kind (wlanX, etc) is not deterministic, so userspace needs to rename these devices to names that are guaranteed to stay the same between reboots. The former, however should never be renamed, so userspace needs to be able to reliably tell the difference. Similar functionality was introduced for the rtnetlink core in commit 5517750f058e ("net: rtnetlink - make create_link take name_assign_type") Signed-off-by: Tom Gundersen <teg@jklm.no> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Brett Rudley <brudley@broadcom.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: Franky (Zhenhui) Lin <frankyl@broadcom.com> Cc: Hante Meuleman <meuleman@broadcom.com> Cc: Johannes Berg <johannes@sipsolutions.net> [reformat changelog to fit 72 cols] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg80211: introduce TDLS channel switch commandsArik Nemtsov1-0/+24
Introduce commands to initiate and cancel TDLS channel-switching. Once TDLS channel-switching is started, the lower level driver is responsible for continually initiating channel-switch operations and returning to the base (AP) channel to listen for beacons from time to time. Upon cancellation of the channel-switch all communication between the relevant TDLS peers will continue on the base channel. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-04cfg80211: 802.11p OCB mode handlingRostislav Lisovy1-0/+21
This patch adds new iface type (NL80211_IFTYPE_OCB) representing the OCB (Outside the Context of a BSS) mode. When establishing a connection to the network a cfg80211_join_ocb function is called (particular nl80211_command is added as well). A mandatory parameters during the ocb_join operation are 'center frequency' and 'channel width (5/10 MHz)'. Changes done in mac80211 are minimal possible required to avoid many warnings (warning: enumeration value 'NL80211_IFTYPE_OCB' not handled in switch) during compilation. Full functionality (where needed) is added in the following patch. Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-20cfg80211: Convert del_station() callback to use a param structJouni Malinen1-3/+4
This makes it easier to add new parameters for the del_station calls without having to modify all drivers that use this. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-09cfg80211: add ops to query mesh proxy path tableHenning Rogge1-1/+26
Add two new cfg80211 operations for querying a table with proxied mesh paths. Signed-off-by: Henning Rogge <henning.rogge@fkie.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-11cfg80211: add WMM traffic stream APIJohannes Berg1-0/+31
Add nl80211 and driver API to validate, add and delete traffic streams with appropriate settings. The API calls for userspace doing the action frame handshake with the peer, and then allows only to set up the parameters in the driver. To avoid setting up a session only to tear it down again, the validate API is provided, but the real usage later can still fail so userspace must be prepared for that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23cfg80211: pass TDLS initiator in tdls_mgmt operationsArik Nemtsov1-3/+3
The TDLS initiator is set once during link setup. If determines the address ordering in the link identifier IE. Fix dependent drivers - mwifiex and mac80211. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23cfg80211: make ethtool the driver's responsibilityJohannes Berg1-48/+0
Currently, cfg80211 tries to implement ethtool, but that doesn't really scale well, with all the different operations. Make the lower-level driver responsible for it, which currently only has an effect on mac80211. It will similarly not scale well at that level though, since mac80211 also has many drivers. To cleanly implement this in mac80211, introduce a new file and move some code to appropriate places. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-21cfg80211: implement cfg80211_get_station cfg80211 APIAntonio Quartulli1-1/+1
Implement and export the new cfg80211_get_station() API. This utility can be used by other kernel modules to obtain detailed information about a given wireless station. It will be in particular useful to batman-adv which will implement a wireless rate based metric. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-28cfg80211: Dynamic channel bandwidth changes in AP modeJouni Malinen1-0/+13
This extends NL80211_CMD_SET_CHANNEL to allow dynamic channel bandwidth changes in AP mode (including P2P GO) during a lifetime of the BSS. This can be used to implement, e.g., HT 20/40 MHz co-existence rules on the 2.4 GHz band. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-21 11:10:42 +0300