summaryrefslogtreecommitdiff
path: root/net/tipc/socket.c
AgeCommit message (Collapse)AuthorFilesLines
2020-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-4/+1
Two minor conflicts: 1) net/ipv4/route.c, adding a new local variable while moving another local variable and removing it's initial assignment. 2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes. One pretty prints the port mode differently, whilst another changes the driver to try and obtain the port mode from the port node rather than the switch node. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-19net: tipc: delete duplicated wordsRandy Dunlap1-1/+1
Drop repeated words in net/tipc/. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jon Maloy <jmaloy@redhat.com> Cc: Ying Xue <ying.xue@windriver.com> Cc: tipc-discussion@lists.sourceforge.net Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10tipc: fix shutdown() of connection oriented socketTetsuo Handa1-4/+1
I confirmed that the problem fixed by commit 2a63866c8b51a3f7 ("tipc: fix shutdown() of connectionless socket") also applies to stream socket. ---------- #include <sys/socket.h> #include <unistd.h> #include <sys/wait.h> int main(int argc, char *argv[]) { int fds[2] = { -1, -1 }; socketpair(PF_TIPC, SOCK_STREAM /* or SOCK_DGRAM */, 0, fds); if (fork() == 0) _exit(read(fds[0], NULL, 1)); shutdown(fds[0], SHUT_RDWR); /* This must make read() return. */ wait(NULL); /* To be woken up by _exit(). */ return 0; } ---------- Since shutdown(SHUT_RDWR) should affect all processes sharing that socket, unconditionally setting sk->sk_shutdown to SHUTDOWN_MASK will be the right behavior. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-3/+6
We got slightly different patches removing a double word in a comment in net/ipv4/raw.c - picked the version from net. Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached values instead of VNIC login response buffer (following what commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login response buffer") did). Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds1-3/+6
Pull networking fixes from David Miller: 1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi Kivilinna. 2) Fix loss of RTT samples in rxrpc, from David Howells. 3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu. 4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka. 5) We disable BH for too lokng in sctp_get_port_local(), add a cond_resched() here as well, from Xin Long. 6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu. 7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from Yonghong Song. 8) Missing of_node_put() in mt7530 DSA driver, from Sumera Priyadarsini. 9) Fix crash in bnxt_fw_reset_task(), from Michael Chan. 10) Fix geneve tunnel checksumming bug in hns3, from Yi Li. 11) Memory leak in rxkad_verify_response, from Dinghao Liu. 12) In tipc, don't use smp_processor_id() in preemptible context. From Tuong Lien. 13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu. 14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter. 15) Fix ABI mismatch between driver and firmware in nfp, from Louis Peens. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits) net/smc: fix sock refcounting in case of termination net/smc: reset sndbuf_desc if freed net/smc: set rx_off for SMCR explicitly net/smc: fix toleration of fake add_link messages tg3: Fix soft lockup when tg3_reset_task() fails. doc: net: dsa: Fix typo in config code sample net: dp83867: Fix WoL SecureOn password nfp: flower: fix ABI mismatch between driver and firmware tipc: fix shutdown() of connectionless socket ipv6: Fix sysctl max for fib_multipath_hash_policy drivers/net/wan/hdlc: Change the default of hard_header_len to 0 net: gemini: Fix another missing clk_disable_unprepare() in probe net: bcmgenet: fix mask check in bcmgenet_validate_flow() amd-xgbe: Add support for new port mode net: usb: dm9601: Add USB ID of Keenetic Plus DSL vhost: fix typo in error message net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init() pktgen: fix error message with wrong function name net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode cxgb4: fix thermal zone device registration ...
2020-09-03tipc: fix shutdown() of connectionless socketTetsuo Handa1-3/+6
syzbot is reporting hung task at nbd_ioctl() [1], for there are two problems regarding TIPC's connectionless socket's shutdown() operation. ---------- #include <fcntl.h> #include <sys/socket.h> #include <sys/ioctl.h> #include <linux/nbd.h> #include <unistd.h> int main(int argc, char *argv[]) { const int fd = open("/dev/nbd0", 3); alarm(5); ioctl(fd, NBD_SET_SOCK, socket(PF_TIPC, SOCK_DGRAM, 0)); ioctl(fd, NBD_DO_IT, 0); /* To be interrupted by SIGALRM. */ return 0; } ---------- One problem is that wait_for_completion() from flush_workqueue() from nbd_start_device_ioctl() from nbd_ioctl() cannot be completed when nbd_start_device_ioctl() received a signal at wait_event_interruptible(), for tipc_shutdown() from kernel_sock_shutdown(SHUT_RDWR) from nbd_mark_nsock_dead() from sock_shutdown() from nbd_start_device_ioctl() is failing to wake up a WQ thread sleeping at wait_woken() from tipc_wait_for_rcvmsg() from sock_recvmsg() from sock_xmit() from nbd_read_stat() from recv_work() scheduled by nbd_start_device() from nbd_start_device_ioctl(). Fix this problem by always invoking sk->sk_state_change() (like inet_shutdown() does) when tipc_shutdown() is called. The other problem is that tipc_wait_for_rcvmsg() cannot return when tipc_shutdown() is called, for tipc_shutdown() sets sk->sk_shutdown to SEND_SHUTDOWN (despite "how" is SHUT_RDWR) while tipc_wait_for_rcvmsg() needs sk->sk_shutdown set to RCV_SHUTDOWN or SHUTDOWN_MASK. Fix this problem by setting sk->sk_shutdown to SHUTDOWN_MASK (like inet_shutdown() does) when the socket is connectionless. [1] https://syzkaller.appspot.com/bug?id=3fe51d307c1f0a845485cf1798aa059d12bf18b2 Reported-by: syzbot <syzbot+e36f41d207137b5d12f7@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31tipc: Remove unused macro TIPC_FWD_MSGYueHaibing1-1/+0
There is no caller in tree any more. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-18net: tipc: Convert to use the preferred fallthrough macroMiaohe Lin1-2/+2
Convert the uses of fallthrough comments to fallthrough macro. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-25net: pass a sockptr_t into ->setsockoptChristoph Hellwig1-4/+4
Rework the remaining setsockopt code to pass a sockptr_t instead of a plain user pointer. This removes the last remaining set_fs(KERNEL_DS) outside of architecture specific code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154] Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14net: tipc: kerneldoc fixesAndrew Lunn1-5/+3
Simple fixes which require no deep knowledge of the code. Cc: Jon Maloy <jmaloy@redhat.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-11tipc: fix kernel WARNING in tipc_msg_append()Tuong Lien1-1/+2
syzbot found the following issue: WARNING: CPU: 0 PID: 6808 at include/linux/thread_info.h:150 check_copy_size include/linux/thread_info.h:150 [inline] WARNING: CPU: 0 PID: 6808 at include/linux/thread_info.h:150 copy_from_iter include/linux/uio.h:144 [inline] WARNING: CPU: 0 PID: 6808 at include/linux/thread_info.h:150 tipc_msg_append+0x49a/0x5e0 net/tipc/msg.c:242 Kernel panic - not syncing: panic_on_warn set ... This happens after commit 5e9eeccc58f3 ("tipc: fix NULL pointer dereference in streaming") that tried to build at least one buffer even when the message data length is zero... However, it now exposes another bug that the 'mss' can be zero and the 'cpy' will be negative, thus the above kernel WARNING will appear! The zero value of 'mss' is never expected because it means Nagle is not enabled for the socket (actually the socket type was 'SOCK_SEQPACKET'), so the function 'tipc_msg_append()' must not be called at all. But that was in this particular case since the message data length was zero, and the 'send <= maxnagle' check became true. We resolve the issue by explicitly checking if Nagle is enabled for the socket, i.e. 'maxnagle != 0' before calling the 'tipc_msg_append()'. We also reinforce the function to against such a negative values if any. Reported-by: syzbot+75139a7d2605236b0b7f@syzkaller.appspotmail.com Fixes: c0bceb97db9e ("tipc: add smart nagle feature") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-02tipc: Fix NULL pointer dereference in __tipc_sendstream()YueHaibing1-2/+6
tipc_sendstream() may send zero length packet, then tipc_msg_append() do not alloc skb, skb_peek_tail() will get NULL, msg_set_ack_required will trigger NULL pointer dereference. Reported-by: syzbot+8eac6d030e7807c21d32@syzkaller.appspotmail.com Fixes: 0a3e060f340d ("tipc: add test for Nagle algorithm effectiveness") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28tipc: call tsk_set_importance from tipc_topsrv_create_listenerChristoph Hellwig1-9/+9
Avoid using kernel_setsockopt for the TIPC_IMPORTANCE option when we can just use the internal helper. The only change needed is to pass a struct sock instead of tipc_sock, which is private to socket.c Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27tipc: add test for Nagle algorithm effectivenessTuong Lien1-12/+52
When streaming in Nagle mode, we try to bundle small messages from user as many as possible if there is one outstanding buffer, i.e. not ACK-ed by the receiving side, which helps boost up the overall throughput. So, the algorithm's effectiveness really depends on when Nagle ACK comes or what the specific network latency (RTT) is, compared to the user's message sending rate. In a bad case, the user's sending rate is low or the network latency is small, there will not be many bundles, so making a Nagle ACK or waiting for it is not meaningful. For example: a user sends its messages every 100ms and the RTT is 50ms, then for each messages, we require one Nagle ACK but then there is only one user message sent without any bundles. In a better case, even if we have a few bundles (e.g. the RTT = 300ms), but now the user sends messages in medium size, then there will not be any difference at all, that says 3 x 1000-byte data messages if bundled will still result in 3 bundles with MTU = 1500. When Nagle is ineffective, the delay in user message sending is clearly wasted instead of sending directly. Besides, adding Nagle ACKs will consume some processor load on both the sending and receiving sides. This commit adds a test on the effectiveness of the Nagle algorithm for an individual connection in the network on which it actually runs. Particularly, upon receipt of a Nagle ACK we will compare the number of bundles in the backlog queue to the number of user messages which would be sent directly without Nagle. If the ratio is good (e.g. >= 2), Nagle mode will be kept for further message sending. Otherwise, we will leave Nagle and put a 'penalty' on the connection, so it will have to spend more 'one-way' messages before being able to re-enter Nagle. In addition, the 'ack-required' bit is only set when really needed that the number of Nagle ACKs will be reduced during Nagle mode. Testing with benchmark showed that with the patch, there was not much difference in throughput for small messages since the tool continuously sends messages without a break, so Nagle would still take in effect. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13tipc: fix large latency in smart Nagle streamingTuong Lien1-11/+31
Currently when a connection is in Nagle mode, we set the 'ack_required' bit in the last sending buffer and wait for the corresponding ACK prior to pushing more data. However, on the receiving side, the ACK is issued only when application really reads the whole data. Even if part of the last buffer is received, we will not do the ACK as required. This might cause an unnecessary delay since the receiver does not always fetch the message as fast as the sender, resulting in a large latency in the user message sending, which is: [one RTT + the receiver processing time]. The commit makes Nagle ACK as soon as possible i.e. when a message with the 'ack_required' arrives in the receiving side's stack even before it is processed or put in the socket receive queue... This way, we can limit the streaming latency to one RTT as committed in Nagle mode. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26tipc: Add a missing case of TIPC_DIRECT_MSG typeHoang Le1-1/+1
In the commit f73b12812a3d ("tipc: improve throughput between nodes in netns"), we're missing a check to handle TIPC_DIRECT_MSG type, it's still using old sending mechanism for this message type. So, throughput improvement is not significant as expected. Besides that, when sending a large message with that type, we're also handle wrong receiving queue, it should be enqueued in socket receiving instead of multicast messages. Fix this by adding the missing case for TIPC_DIRECT_MSG. Fixes: f73b12812a3d ("tipc: improve throughput between nodes in netns") Reported-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-10tipc: fix successful connect() but timed outTuong Lien1-0/+2
In commit 9546a0b7ce00 ("tipc: fix wrong connect() return code"), we fixed the issue with the 'connect()' that returns zero even though the connecting has failed by waiting for the connection to be 'ESTABLISHED' really. However, the approach has one drawback in conjunction with our 'lightweight' connection setup mechanism that the following scenario can happen: (server) (client) +- accept()| | wait_for_conn() | | |connect() -------+ | |<-------[SYN]---------| > sleeping | | *CONNECTING | |--------->*ESTABLISHED | | |--------[ACK]-------->*ESTABLISHED > wakeup() send()|--------[DATA]------->|\ > wakeup() send()|--------[DATA]------->| | > wakeup() . . . . |-> recvq . . . . . | . send()|--------[DATA]------->|/ > wakeup() close()|--------[FIN]-------->*DISCONNECTING | *DISCONNECTING | | | ~~~~~~~~~~~~~~~~~~> schedule() | wait again . . | ETIMEDOUT Upon the receipt of the server 'ACK', the client becomes 'ESTABLISHED' and the 'wait_for_conn()' process is woken up but not run. Meanwhile, the server starts to send a number of data following by a 'close()' shortly without waiting any response from the client, which then forces the client socket to be 'DISCONNECTING' immediately. When the wait process is switched to be running, it continues to wait until the timer expires because of the unexpected socket state. The client 'connect()' will finally get ‘-ETIMEDOUT’ and force to release the socket whereas there remains the messages in its receive queue. Obviously the issue would not happen if the server had some delay prior to its 'close()' (or the number of 'DATA' messages is large enough), but any kind of delay would make the connection setup/shutdown "heavy". We solve this by simply allowing the 'connect()' returns zero in this particular case. The socket is already 'DISCONNECTING', so any further write will get '-EPIPE' but the socket is still able to read the messages existing in its receive queue. Note: This solution doesn't break the previous one as it deals with a different situation that the socket state is 'DISCONNECTING' but has no error (i.e. sk->sk_err = 0). Fixes: 9546a0b7ce00 ("tipc: fix wrong connect() return code") Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09tipc: fix wrong connect() return codeTuong Lien1-2/+2
The current 'tipc_wait_for_connect()' function does a wait-loop for the condition 'sk->sk_state != TIPC_CONNECTING' to conclude if the socket connecting has done. However, when the condition is met, it returns '0' even in the case the connecting is actually failed, the socket state is set to 'TIPC_DISCONNECTING' (e.g. when the server socket has closed..). This results in a wrong return code for the 'connect()' call from user, making it believe that the connection is established and go ahead with building, sending a message, etc. but finally failed e.g. '-EPIPE'. This commit fixes the issue by changing the wait condition to the 'tipc_sk_connected(sk)', so the function will return '0' only when the connection is really established. Otherwise, either the socket 'sk_err' if any or '-ETIMEDOUT'/'-EINTR' will be returned correspondingly. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09tipc: fix link overflow issue at socket shutdownTuong Lien1-21/+32
When a socket is suddenly shutdown or released, it will reject all the unreceived messages in its receive queue. This applies to a connected socket too, whereas there is only one 'FIN' message required to be sent back to its peer in this case. In case there are many messages in the queue and/or some connections with such messages are shutdown at the same time, the link layer will easily get overflowed at the 'TIPC_SYSTEM_IMPORTANCE' backlog level because of the message rejections. As a result, the link will be taken down. Moreover, immediately when the link is re-established, the socket layer can continue to reject the messages and the same issue happens... The commit refactors the '__tipc_shutdown()' function to only send one 'FIN' in the situation mentioned above. For the connectionless case, it is unavoidable but usually there is no rejections for such socket messages because they are 'dest-droppable' by default. In addition, the new code makes the other socket states clear (e.g.'TIPC_LISTEN') and treats as a separate case to avoid misbehaving. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11tipc: fix retrans failure due to wrong destinationTuong Lien1-14/+18
When a user message is sent, TIPC will check if the socket has faced a congestion at link layer. If that happens, it will make a sleep to wait for the congestion to disappear. This leaves a gap for other users to take over the socket (e.g. multi threads) since the socket is released as well. Also, in case of connectionless (e.g. SOCK_RDM), user is free to send messages to various destinations (e.g. via 'sendto()'), then the socket's preformatted header has to be updated correspondingly prior to the actual payload message building. Unfortunately, the latter action is done before the first action which causes a condition issue that the destination of a certain message can be modified incorrectly in the middle, leading to wrong destination when that message is built. Consequently, when the message is sent to the link layer, it gets stuck there forever because the peer node will simply reject it. After a number of retransmission attempts, the link is eventually taken down and the retransmission failure is reported. This commit fixes the problem by rearranging the order of actions to prevent the race condition from occurring, so the message building is 'atomic' and its header will not be modified by anyone. Fixes: 365ad353c256 ("tipc: reduce risk of user starvation during link congestion") Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-29tipc: fix duplicate SYN messages under link congestionTung Nguyen1-7/+10
Scenario: 1. A client socket initiates a SYN message to a listening socket. 2. The send link is congested, the SYN message is put in the send link and a wakeup message is put in wakeup queue. 3. The congestion situation is abated, the wakeup message is pulled out of the wakeup queue. Function tipc_sk_push_backlog() is called to send out delayed messages by Nagle. However, the client socket is still in CONNECTING state. So, it sends the SYN message in the socket write queue to the listening socket again. 4. The listening socket receives the first SYN message and creates first server socket. The client socket receives ACK- and establishes a connection to the first server socket. The client socket closes its connection with the first server socket. 5. The listening socket receives the second SYN message and creates second server socket. The second server socket sends ACK- to the client socket, but it has been closed. It results in connection reset error when reading from the server socket in user space. Solution: return from function tipc_sk_push_backlog() immediately if there is pending SYN message in the socket write queue. Fixes: c0bceb97db9e ("tipc: add smart nagle feature") Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-29tipc: fix wrong timeout input for tipc_wait_for_cond()Tung Nguyen1-1/+1
In function __tipc_shutdown(), the timeout value passed to tipc_wait_for_cond() is not jiffies. This commit fixes it by converting that value from milliseconds to jiffies. Fixes: 365ad353c256 ("tipc: reduce risk of user starvation during link congestion") Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-29tipc: fix wrong socket reference counter after tipc_sk_timeout() returnsTung Nguyen1-0/+1
When tipc_sk_timeout() is executed but user space is grabbing ownership, this function rearms itself and returns. However, the socket reference counter is not reduced. This causes potential unexpected behavior. This commit fixes it by calling sock_put() before tipc_sk_timeout() returns in the above-mentioned case. Fixes: afe8792fec69 ("tipc: refactor function tipc_sk_timeout()") Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-29tipc: fix potential memory leak in __tipc_sendmsg()Tung Nguyen1-1/+3
When initiating a connection message to a server side, the connection message is cloned and added to the socket write queue. However, if the cloning is failed, only the socket write queue is purged. It causes memory leak because the original connection message is not freed. This commit fixes it by purging the list of connection message when it cannot be cloned. Fixes: 6787927475e5 ("tipc: buffer overflow handling in listener socket") Reported-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-23net: use rhashtable_lookup() instead of rhashtable_lookup_fast()Taehee Yoo1-1/+1
rhashtable_lookup_fast() internally calls rcu_read_lock() then, calls rhashtable_lookup(). So if rcu_read_lock() is already held, rhashtable_lookup() is enough. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-2/+2
The only slightly tricky merge conflict was the netdevsim because the mutex locking fix overlapped a lot of driver reload reorganization. The rest were (relatively) trivial in nature. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30tipc: add smart nagle featureJon Maloy1-18/+99
We introduce a feature that works like a combination of TCP_NAGLE and TCP_CORK, but without some of the weaknesses of those. In particular, we will not observe long delivery delays because of delayed acks, since the algorithm itself decides if and when acks are to be sent from the receiving peer. - The nagle property as such is determined by manipulating a new 'maxnagle' field in struct tipc_sock. If certain conditions are met, 'maxnagle' will define max size of the messages which can be bundled. If it is set to zero no messages are ever bundled, implying that the nagle property is disabled. - A socket with the nagle property enabled enters nagle mode when more than 4 messages have been sent out without receiving any data message from the peer. - A socket leaves nagle mode whenever it receives a data message from the peer. In nagle mode, messages smaller than 'maxnagle' are accumulated in the socket write queue. The last buffer in the queue is marked with a new 'ack_required' bit, which forces the receiving peer to send a CONN_ACK message back to the sender upon reception. The accumulated contents of the write queue is transmitted when one of the following events or conditions occur. - A CONN_ACK message is received from the peer. - A data message is received from the peer. - A SOCK_WAKEUP pseudo message is received from the link level. - The write queue contains more than 64 1k blocks of data. - The connection is being shut down. - There is no CONN_ACK message to expect. I.e., there is currently no outstanding message where the 'ack_required' bit was set. As a consequence, the first message added after we enter nagle mode is always sent directly with this bit set. This new feature gives a 50-100% improvement of throughput for small (i.e., less than MTU size) messages, while it might add up to one RTT to latency time when the socket is in nagle mode. Acked-by: Ying Xue <ying.xue@windreiver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30tipc: improve throughput between nodes in netnsHoang Le1-3/+3
Currently, TIPC transports intra-node user data messages directly socket to socket, hence shortcutting all the lower layers of the communication stack. This gives TIPC very good intra node performance, both regarding throughput and latency. We now introduce a similar mechanism for TIPC data traffic across network namespaces located in the same kernel. On the send path, the call chain is as always accompanied by the sending node's network name space pointer. However, once we have reliably established that the receiving node is represented by a namespace on the same host, we just replace the namespace pointer with the receiving node/namespace's ditto, and follow the regular socket receive patch though the receiving node. This technique gives us a throughput similar to the node internal throughput, several times larger than if we let the traffic go though the full network stacks. As a comparison, max throughput for 64k messages is four times larger than TCP throughput for the same type of traffic. To meet any security concerns, the following should be noted. - All nodes joining a cluster are supposed to have been be certified and authenticated by mechanisms outside TIPC. This is no different for nodes/namespaces on the same host; they have to auto discover each other using the attached interfaces, and establish links which are supervised via the regular link monitoring mechanism. Hence, a kernel local node has no other way to join a cluster than any other node, and have to obey to policies set in the IP or device layers of the stack. - Only when a sender has established with 100% certainty that the peer node is located in a kernel local namespace does it choose to let user data messages, and only those, take the crossover path to the receiving node/namespace. - If the receiving node/namespace is removed, its namespace pointer is invalidated at all peer nodes, and their neighbor link monitoring will eventually note that this node is gone. - To ensure the "100% certainty" criteria, and prevent any possible spoofing, received discovery messages must contain a proof that the sender knows a common secret. We use the hash mix of the sending node/namespace for this purpose, since it can be accessed directly by all other namespaces in the kernel. Upon reception of a discovery message, the receiver checks this proof against all the local namespaces'hash_mix:es. If it finds a match, that, along with a matching node id and cluster id, this is deemed sufficient proof that the peer node in question is in a local namespace, and a wormhole can be opened. - We should also consider that TIPC is intended to be a cluster local IPC mechanism (just like e.g. UNIX sockets) rather than a network protocol, and hence we think it can justified to allow it to shortcut the lower protocol layers. Regarding traceability, we should notice that since commit 6c9081a3915d ("tipc: add loopback device tracking") it is possible to follow the node internal packet flow by just activating tcpdump on the loopback interface. This will be true even for this mechanism; by activating tcpdump on the involved nodes' loopback interfaces their inter-name space messaging can easily be tracked. v2: - update 'net' pointer when node left/rejoined v3: - grab read/write lock when using node ref obj v4: - clone traffics between netns to loopback Suggested-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: use skb_queue_empty_lockless() in poll() handlersEric Dumazet1-2/+2
Many poll() handlers are lockless. Using skb_queue_empty_lockless() instead of skb_queue_empty() is more appropriate. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-4/+4
Several cases of overlapping changes which were for the most part trivially resolvable. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-10net: silence KCSAN warnings about sk->sk_backlog.len readsEric Dumazet1-1/+1
sk->sk_backlog.len can be written by BH handlers, and read from process contexts in a lockless way. Note the write side should also use WRITE_ONCE() or a variant. We need some agreement about the best way to do this. syzbot reported : BUG: KCSAN: data-race in tcp_add_backlog / tcp_grow_window.isra.0 write to 0xffff88812665f32c of 4 bytes by interrupt on cpu 1: sk_add_backlog include/net/sock.h:934 [inline] tcp_add_backlog+0x4a0/0xcc0 net/ipv4/tcp_ipv4.c:1737 tcp_v4_rcv+0x1aba/0x1bf0 net/ipv4/tcp_ipv4.c:1925 ip_protocol_deliver_rcu+0x51/0x470 net/ipv4/ip_input.c:204 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:442 [inline] ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5004 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5118 netif_receive_skb_internal+0x59/0x190 net/core/dev.c:5208 napi_skb_finish net/core/dev.c:5671 [inline] napi_gro_receive+0x28f/0x330 net/core/dev.c:5704 receive_buf+0x284/0x30b0 drivers/net/virtio_net.c:1061 virtnet_receive drivers/net/virtio_net.c:1323 [inline] virtnet_poll+0x436/0x7d0 drivers/net/virtio_net.c:1428 napi_poll net/core/dev.c:6352 [inline] net_rx_action+0x3ae/0xa50 net/core/dev.c:6418 read to 0xffff88812665f32c of 4 bytes by task 7292 on cpu 0: tcp_space include/net/tcp.h:1373 [inline] tcp_grow_window.isra.0+0x6b/0x480 net/ipv4/tcp_input.c:413 tcp_event_data_recv+0x68f/0x990 net/ipv4/tcp_input.c:717 tcp_rcv_established+0xbfe/0xf50 net/ipv4/tcp_input.c:5618 tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1542 sk_backlog_rcv include/net/sock.h:945 [inline] __release_sock+0x135/0x1e0 net/core/sock.c:2427 release_sock+0x61/0x160 net/core/sock.c:2943 tcp_recvmsg+0x63b/0x1a30 net/ipv4/tcp.c:2181 inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838 sock_recvmsg_nosec net/socket.c:871 [inline] sock_recvmsg net/socket.c:889 [inline] sock_recvmsg+0x92/0xb0 net/socket.c:885 sock_read_iter+0x15f/0x1e0 net/socket.c:967 call_read_iter include/linux/fs.h:1864 [inline] new_sync_read+0x389/0x4f0 fs/read_write.c:414 __vfs_read+0xb1/0xc0 fs/read_write.c:427 vfs_read fs/read_write.c:461 [inline] vfs_read+0x143/0x2c0 fs/read_write.c:446 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 7292 Comm: syz-fuzzer Not tainted 5.3.0+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-10net: silence KCSAN warnings around sk_add_backlog() callsEric Dumazet1-3/+3
sk_add_backlog() callers usually read sk->sk_rcvbuf without owning the socket lock. This means sk_rcvbuf value can be changed by other cpus, and KCSAN complains. Add READ_ONCE() annotations to document the lockless nature of these reads. Note that writes over sk_rcvbuf should also use WRITE_ONCE(), but this will be done in separate patches to ease stable backports (if we decide this is relevant for stable trees). BUG: KCSAN: data-race in tcp_add_backlog / tcp_recvmsg write to 0xffff88812ab369f8 of 8 bytes by interrupt on cpu 1: __sk_add_backlog include/net/sock.h:902 [inline] sk_add_backlog include/net/sock.h:933 [inline] tcp_add_backlog+0x45a/0xcc0 net/ipv4/tcp_ipv4.c:1737 tcp_v4_rcv+0x1aba/0x1bf0 net/ipv4/tcp_ipv4.c:1925 ip_protocol_deliver_rcu+0x51/0x470 net/ipv4/ip_input.c:204 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:442 [inline] ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5004 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5118 netif_receive_skb_internal+0x59/0x190 net/core/dev.c:5208 napi_skb_finish net/core/dev.c:5671 [inline] napi_gro_receive+0x28f/0x330 net/core/dev.c:5704 receive_buf+0x284/0x30b0 drivers/net/virtio_net.c:1061 virtnet_receive drivers/net/virtio_net.c:1323 [inline] virtnet_poll+0x436/0x7d0 drivers/net/virtio_net.c:1428 napi_poll net/core/dev.c:6352 [inline] net_rx_action+0x3ae/0xa50 net/core/dev.c:6418 read to 0xffff88812ab369f8 of 8 bytes by task 7271 on cpu 0: tcp_recvmsg+0x470/0x1a30 net/ipv4/tcp.c:2047 inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838 sock_recvmsg_nosec net/socket.c:871 [inline] sock_recvmsg net/socket.c:889 [inline] sock_recvmsg+0x92/0xb0 net/socket.c:885 sock_read_iter+0x15f/0x1e0 net/socket.c:967 call_read_iter include/linux/fs.h:1864 [inline] new_sync_read+0x389/0x4f0 fs/read_write.c:414 __vfs_read+0xb1/0xc0 fs/read_write.c:427 vfs_read fs/read_write.c:461 [inline] vfs_read+0x143/0x2c0 fs/read_write.c:446 ksys_read+0xd5/0x1b0 fs/read_write.c:587 __do_sys_read fs/read_write.c:597 [inline] __se_sys_read fs/read_write.c:595 [inline] __x64_sys_read+0x4c/0x60 fs/read_write.c:595 do_syscall_64+0xcf/0x2f0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 7271 Comm: syz-fuzzer Not tainted 5.3.0+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-06net: tipc: have genetlink code to parse the attrs during dumpitJiri Pirko1-5/+1
Benefit from the fact that the generic netlink code can parse the attrs for dumpit op and avoid need to parse it in the op callback. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-19tipc: clean up skb list lock handling on send pathJon Maloy1-7/+7
The policy for handling the skb list locks on the send and receive paths is simple. - On the send path we never need to grab the lock on the 'xmitq' list when the destination is an exernal node. - On the receive path we always need to grab the lock on the 'inputq' list, irrespective of source node. However, when transmitting node local messages those will eventually end up on the receive path of a local socket, meaning that the argument 'xmitq' in tipc_node_xmit() will become the 'ínputq' argument in the function tipc_sk_rcv(). This has been handled by always initializing the spinlock of the 'xmitq' list at message creation, just in case it may end up on the receive path later, and despite knowing that the lock in most cases never will be used. This approach is inaccurate and confusing, and has also concealed the fact that the stated 'no lock grabbing' policy for the send path is violated in some cases. We now clean up this by never initializing the lock at message creation, instead doing this at the moment we find that the message actually will enter the receive path. At the same time we fix the four locations where we incorrectly access the spinlock on the send/error path. This patch also reverts commit d12cffe9329f ("tipc: ensure head->lock is initialised") which has now become redundant. CC: Eric Dumazet <edumazet@google.com> Reported-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31tipc: fix unitilized skb list crashJon Maloy1-2/+1
Our test suite somtimes provokes the following crash: Description of problem: [ 1092.597234] BUG: unable to handle kernel NULL pointer dereference at 00000000000000e8 [ 1092.605072] PGD 0 P4D 0 [ 1092.607620] Oops: 0000 [#1] SMP PTI [ 1092.611118] CPU: 37 PID: 0 Comm: swapper/37 Kdump: loaded Not tainted 4.18.0-122.el8.x86_64 #1 [ 1092.619724] Hardware name: Dell Inc. PowerEdge R740/08D89F, BIOS 1.3.7 02/08/2018 [ 1092.627215] RIP: 0010:tipc_mcast_filter_msg+0x93/0x2d0 [tipc] [ 1092.632955] Code: 0f 84 aa 01 00 00 89 cf 4d 01 ca 4c 8b 26 c1 ef 19 83 e7 0f 83 ff 0c 4d 0f 45 d1 41 8b 6a 10 0f cd 4c 39 e6 0f 84 81 01 00 00 <4d> 8b 9c 24 e8 00 00 00 45 8b 13 41 0f ca 44 89 d7 c1 ef 13 83 e7 [ 1092.651703] RSP: 0018:ffff929e5fa83a18 EFLAGS: 00010282 [ 1092.656927] RAX: ffff929e3fb38100 RBX: 00000000069f29ee RCX: 00000000416c0045 [ 1092.664058] RDX: ffff929e5fa83a88 RSI: ffff929e31a28420 RDI: 0000000000000000 [ 1092.671209] RBP: 0000000029b11821 R08: 0000000000000000 R09: ffff929e39b4407a [ 1092.678343] R10: ffff929e39b4407a R11: 0000000000000007 R12: 0000000000000000 [ 1092.685475] R13: 0000000000000001 R14: ffff929e3fb38100 R15: ffff929e39b4407a [ 1092.692614] FS: 0000000000000000(0000) GS:ffff929e5fa80000(0000) knlGS:0000000000000000 [ 1092.700702] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1092.706447] CR2: 00000000000000e8 CR3: 000000031300a004 CR4: 00000000007606e0 [ 1092.713579] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1092.720712] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1092.727843] PKRU: 55555554 [ 1092.730556] Call Trace: [ 1092.733010] <IRQ> [ 1092.735034] tipc_sk_filter_rcv+0x7ca/0xb80 [tipc] [ 1092.739828] ? __kmalloc_node_track_caller+0x1cb/0x290 [ 1092.744974] ? dev_hard_start_xmit+0xa5/0x210 [ 1092.749332] tipc_sk_rcv+0x389/0x640 [tipc] [ 1092.753519] tipc_sk_mcast_rcv+0x23c/0x3a0 [tipc] [ 1092.758224] tipc_rcv+0x57a/0xf20 [tipc] [ 1092.762154] ? ktime_get_real_ts64+0x40/0xe0 [ 1092.766432] ? tpacket_rcv+0x50/0x9f0 [ 1092.770098] tipc_l2_rcv_msg+0x4a/0x70 [tipc] [ 1092.774452] __netif_receive_skb_core+0xb62/0xbd0 [ 1092.779164] ? enqueue_entity+0xf6/0x630 [ 1092.783084] ? kmem_cache_alloc+0x158/0x1c0 [ 1092.787272] ? __build_skb+0x25/0xd0 [ 1092.790849] netif_receive_skb_internal+0x42/0xf0 [ 1092.795557] napi_gro_receive+0xba/0xe0 [ 1092.799417] mlx5e_handle_rx_cqe+0x83/0xd0 [mlx5_core] [ 1092.804564] mlx5e_poll_rx_cq+0xd5/0x920 [mlx5_core] [ 1092.809536] mlx5e_napi_poll+0xb2/0xce0 [mlx5_core] [ 1092.814415] ? __wake_up_common_lock+0x89/0xc0 [ 1092.818861] net_rx_action+0x149/0x3b0 [ 1092.822616] __do_softirq+0xe3/0x30a [ 1092.826193] irq_exit+0x100/0x110 [ 1092.829512] do_IRQ+0x85/0xd0 [ 1092.832483] common_interrupt+0xf/0xf [ 1092.836147] </IRQ> [ 1092.838255] RIP: 0010:cpuidle_enter_state+0xb7/0x2a0 [ 1092.843221] Code: e8 3e 79 a5 ff 80 7c 24 03 00 74 17 9c 58 0f 1f 44 00 00 f6 c4 02 0f 85 d7 01 00 00 31 ff e8 a0 6b ab ff fb 66 0f 1f 44 00 00 <48> b8 ff ff ff ff f3 01 00 00 4c 29 f3 ba ff ff ff 7f 48 39 c3 7f [ 1092.861967] RSP: 0018:ffffaa5ec6533e98 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd [ 1092.869530] RAX: ffff929e5faa3100 RBX: 000000fe63dd2092 RCX: 000000000000001f [ 1092.876665] RDX: 000000fe63dd2092 RSI: 000000003a518aaa RDI: 0000000000000000 [ 1092.883795] RBP: 0000000000000003 R08: 0000000000000004 R09: 0000000000022940 [ 1092.890929] R10: 0000040cb0666b56 R11: ffff929e5faa20a8 R12: ffff929e5faade78 [ 1092.898060] R13: ffffffffb59258f8 R14: 000000fe60f3228d R15: 0000000000000000 [ 1092.905196] ? cpuidle_enter_state+0x92/0x2a0 [ 1092.909555] do_idle+0x236/0x280 [ 1092.912785] cpu_startup_entry+0x6f/0x80 [ 1092.916715] start_secondary+0x1a7/0x200 [ 1092.920642] secondary_startup_64+0xb7/0xc0 [...] The reason is that the skb list tipc_socket::mc_method.deferredq only is initialized for connectionless sockets, while nothing stops arriving multicast messages from being filtered by connection oriented sockets, with subsequent access to the said list. We fix this by initializing the list unconditionally at socket creation. This eliminates the crash, while the message still is dropped further down in tipc_sk_filter_rcv() as it should be. Reported-by: Li Shuang <shuali@redhat.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09tipc: fix hanging clients using poll with EPOLLOUT flagParthasarathy Bhuvaragan1-2/+2
commit 517d7c79bdb398 ("tipc: fix hanging poll() for stream sockets") introduced a regression for clients using non-blocking sockets. After the commit, we send EPOLLOUT event to the client even in TIPC_CONNECTING state. This causes the subsequent send() to fail with ENOTCONN, as the socket is still not in TIPC_ESTABLISHED state. In this commit, we: - improve the fix for hanging poll() by replacing sk_data_ready() with sk_state_change() to wake up all clients. - revert the faulty updates introduced by commit 517d7c79bdb398 ("tipc: fix hanging poll() for stream sockets"). Fixes: 517d7c79bdb398 ("tipc: fix hanging poll() for stream sockets") Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@gmail.com> Acked-by: Jon Maloy <jon.maloy@ericsson.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28netlink: make validation more configurable for future strictnessJohannes Berg1-3/+3
We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28netlink: make nla_nest_start() add NLA_F_NESTED flagMichal Kubecek1-5/+5
Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-20tipc: introduce new socket option TIPC_SOCK_RECVQ_USEDTung Nguyen1-0/+3
When using TIPC_SOCK_RECVQ_DEPTH for getsockopt(), it returns the number of buffers in receive socket buffer which is not so helpful for user space applications. This commit introduces the new option TIPC_SOCK_RECVQ_USED which returns the current allocated bytes of the receive socket buffer. This helps user space applications dimension its buffer usage to avoid buffer overload issue. Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21tipc: fix a null pointer derefHoang Le1-1/+1
In commit c55c8edafa91 ("tipc: smooth change between replicast and broadcast") we introduced new method to eliminate the risk of message reordering that happen in between different nodes. Unfortunately, we forgot checking at receiving side to ignore intra node. We fix this by checking and returning if arrived message from intra node. syzbot report: ================================================================== kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 7820 Comm: syz-executor418 Not tainted 5.0.0+ #61 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tipc_mcast_filter_msg+0x21b/0x13d0 net/tipc/bcast.c:782 Code: 45 c0 0f 84 39 06 00 00 48 89 5d 98 e8 ce ab a5 fa 49 8d bc 24 c8 00 00 00 48 b9 00 00 00 00 00 fc ff df 48 89 f8 48 c1 e8 03 <80> 3c 08 00 0f 85 9a 0e 00 00 49 8b 9c 24 c8 00 00 00 48 be 00 00 RSP: 0018:ffff8880959defc8 EFLAGS: 00010202 RAX: 0000000000000019 RBX: ffff888081258a48 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffffffff86cab862 RDI: 00000000000000c8 RBP: ffff8880959df030 R08: ffff8880813d0200 R09: ffffed1015d05bc8 R10: ffffed1015d05bc7 R11: ffff8880ae82de3b R12: 0000000000000000 R13: 000000000000002c R14: 0000000000000000 R15: ffff888081258a48 FS: 000000000106a880(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020001cc0 CR3: 0000000094a20000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tipc_sk_filter_rcv+0x182d/0x34f0 net/tipc/socket.c:2168 tipc_sk_enqueue net/tipc/socket.c:2254 [inline] tipc_sk_rcv+0xc45/0x25a0 net/tipc/socket.c:2305 tipc_sk_mcast_rcv+0x724/0x1020 net/tipc/socket.c:1209 tipc_mcast_xmit+0x7fe/0x1200 net/tipc/bcast.c:410 tipc_sendmcast+0xb36/0xfc0 net/tipc/socket.c:820 __tipc_sendmsg+0x10df/0x18d0 net/tipc/socket.c:1358 tipc_sendmsg+0x53/0x80 net/tipc/socket.c:1291 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:661 ___sys_sendmsg+0x806/0x930 net/socket.c:2260 __sys_sendmsg+0x105/0x1d0 net/socket.c:2298 __do_sys_sendmsg net/socket.c:2307 [inline] __se_sys_sendmsg net/socket.c:2305 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2305 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4401c9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffd887fa9d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004401c9 RDX: 0000000000000000 RSI: 0000000020002140 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401a50 R13: 0000000000401ae0 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace ba79875754e1708f ]--- Reported-by: syzbot+be4bdf2cc3e85e952c50@syzkaller.appspotmail.com Fixes: c55c8eda ("tipc: smooth change between replicast and broadcast") Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21tipc: fix use-after-free in tipc_sk_filter_rcvHoang Le1-1/+2
skb free-ed in: 1/ condition 1: tipc_sk_filter_rcv -> tipc_sk_proto_rcv 2/ condition 2: tipc_sk_filter_rcv -> tipc_group_filter_msg This leads to a "use-after-free" access in the next condition. We fix this by intializing the variable at declaration, then it is safe to check this variable to continue processing if condition matches. syzbot report: ================================================================== BUG: KASAN: use-after-free in tipc_sk_filter_rcv+0x2166/0x34f0 net/tipc/socket.c:2167 Read of size 4 at addr ffff88808ea58534 by task kworker/u4:0/7 CPU: 0 PID: 7 Comm: kworker/u4:0 Not tainted 5.0.0+ #61 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: tipc_send tipc_conn_send_work Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131 tipc_sk_filter_rcv+0x2166/0x34f0 net/tipc/socket.c:2167 tipc_sk_enqueue net/tipc/socket.c:2254 [inline] tipc_sk_rcv+0xc45/0x25a0 net/tipc/socket.c:2305 tipc_topsrv_kern_evt+0x3b7/0x580 net/tipc/topsrv.c:610 tipc_conn_send_to_sock+0x43e/0x5f0 net/tipc/topsrv.c:283 tipc_conn_send_work+0x65/0x80 net/tipc/topsrv.c:303 process_one_work+0x98e/0x1790 kernel/workqueue.c:2269 worker_thread+0x98/0xe40 kernel/workqueue.c:2415 kthread+0x357/0x430 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Reported-by: syzbot+e863893591cc7a622e40@syzkaller.appspotmail.com Fixes: c55c8eda ("tipc: smooth change between replicast and broadcast") Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19tipc: smooth change between replicast and broadcastHoang Le1-0/+5
Currently, a multicast stream may start out using replicast, because there are few destinations, and then it should ideally switch to L2/broadcast IGMP/multicast when the number of destinations grows beyond a certain limit. The opposite should happen when the number decreases below the limit. To eliminate the risk of message reordering caused by method change, a sending socket must stick to a previously selected method until it enters an idle period of 5 seconds. Means there is a 5 seconds pause in the traffic from the sender socket. If the sender never makes such a pause, the method will never change, and transmission may become very inefficient as the cluster grows. With this commit, we allow such a switch between replicast and broadcast without any need for a traffic pause. Solution is to send a dummy message with only the header, also with the SYN bit set, via broadcast or replicast. For the data message, the SYN bit is set and sending via replicast or broadcast (inverse method with dummy). Then, at receiving side any messages follow first SYN bit message (data or dummy message), they will be held in deferred queue until another pair (dummy or data message) arrived in other link. v2: reverse christmas tree declaration Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18tipc: allow service ranges to be connect()'ed on RDM/DGRAMErik Hugne1-5/+15
We move the check that prevents connecting service ranges to after the RDM/DGRAM check, and move address sanity control to a separate function that also validates the service range. Fixes: 23998835be98 ("tipc: improve address sanity check in tipc_connect()") Signed-off-by: Erik Hugne <erik.hugne@gmail.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-17net: tipc: fix a missing check for nla_nest_startKangjie Lu1-0/+2
nla_nest_start may fail. The fix check its status and returns -EMSGSIZE in case it fails. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-05tipc: fix RDM/DGRAM connect() regressionErik Hugne1-1/+1
Fix regression bug introduced in commit 365ad353c256 ("tipc: reduce risk of user starvation during link congestion") Only signal -EDESTADDRREQ for RDM/DGRAM if we don't have a cached sockaddr. Fixes: 365ad353c256 ("tipc: reduce risk of user starvation during link congestion") Signed-off-by: Erik Hugne <erik.hugne@gmail.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+5
2019-02-27tipc: fix race condition causing hung sendtoTung Nguyen1-1/+5
When sending multicast messages via blocking socket, if sending link is congested (tsk->cong_link_cnt is set to 1), the sending thread will be put into sleeping state. However, tipc_sk_filter_rcv() is called under socket spin lock but tipc_wait_for_cond() is not. So, there is no guarantee that the setting of tsk->cong_link_cnt to 0 in tipc_sk_proto_rcv() in CPU-1 will be perceived by CPU-0. If that is the case, the sending thread in CPU-0 after being waken up, will continue to see tsk->cong_link_cnt as 1 and put the sending thread into sleeping state again. The sending thread will sleep forever. CPU-0 | CPU-1 tipc_wait_for_cond() | { | // condition_ = !tsk->cong_link_cnt | while ((rc_ = !(condition_))) { | ... | release_sock(sk_); | wait_woken(); | | if (!sock_owned_by_user(sk)) | tipc_sk_filter_rcv() | { | ... | tipc_sk_proto_rcv() | { | ... | tsk->cong_link_cnt--; | ... | sk->sk_write_space(sk); | ... | } | ... | } sched_annotate_sleep(); | lock_sock(sk_); | remove_wait_queue(); | } | } | This commit fixes it by adding memory barrier to tipc_sk_proto_rcv() and tipc_wait_for_cond(). Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-5/+6
Three conflicts, one of which, for marvell10g.c is non-trivial and requires some follow-up from Heiner or someone else. The issue is that Heiner converted the marvell10g driver over to use the generic c45 code as much as possible. However, in 'net' a bug fix appeared which makes sure that a new local mask (MDIO_AN_10GBT_CTRL_ADV_NBT_MASK) with value 0x01e0 is cleared. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22tipc: improve function tipc_wait_for_rcvmsg()Tung Nguyen1-4/+5
This commit replaces schedule_timeout() with wait_woken() in function tipc_wait_for_rcvmsg(). wait_woken() uses memory barriers in its implementation to avoid potential race condition when putting a process into sleeping state and then waking it up. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-29 00:20:36 +0300