| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
created by classifiers
tcf_action_init() has logic for checking mismatches between action and
filter offload flags (skip_sw/skip_hw). AFAIU, this is intended to run
on the transition between the new tc_act_bind(flags) returning true (aka
now gets bound to classifier) and tc_act_bind(act->tcfa_flags) returning
false (aka action was not bound to classifier before). Otherwise, the
check is skipped.
For the case where an action is not standalone, but rather it was
created by a classifier and is bound to it, tcf_action_init() skips the
check entirely, and this means it allows mismatched flags to occur.
Taking the matchall classifier code path as an example (with mirred as
an action), the reason is the following:
1 | mall_change()
2 | -> mall_replace_hw_filter()
3 | -> tcf_exts_validate_ex()
4 | -> flags |= TCA_ACT_FLAGS_BIND;
5 | -> tcf_action_init()
6 | -> tcf_action_init_1()
7 | -> a_o->init()
8 | -> tcf_mirred_init()
9 | -> tcf_idr_create_from_flags()
10 | -> tcf_idr_create()
11 | -> p->tcfa_flags = flags;
12 | -> tc_act_bind(flags))
13 | -> tc_act_bind(act->tcfa_flags)
When invoked from tcf_exts_validate_ex() like matchall does (but other
classifiers validate their extensions as well), tcf_action_init() runs
in a call path where "flags" always contains TCA_ACT_FLAGS_BIND (set by
line 4). So line 12 is always true, and line 13 is always true as well.
No transition ever takes place, and the check is skipped.
The code was added in this form in commit c86e0209dc77 ("flow_offload:
validate flags of filter and actions"), but I'm attributing the blame
even earlier in that series, to when TCA_ACT_FLAGS_SKIP_HW and
TCA_ACT_FLAGS_SKIP_SW were added to the UAPI.
Following the development process of this change, the check did not
always exist in this form. A change took place between v3 [1] and v4 [2],
AFAIU due to review feedback that it doesn't make sense for action flags
to be different than classifier flags. I think I agree with that
feedback, but it was translated into code that omits enforcing this for
"classic" actions created at the same time with the filters themselves.
There are 3 more important cases to discuss. First there is this command:
$ tc qdisc add dev eth0 clasct
$ tc filter add dev eth0 ingress matchall skip_sw \
action mirred ingress mirror dev eth1
which should be allowed, because prior to the concept of dedicated
action flags, it used to work and it used to mean the action inherited
the skip_sw/skip_hw flags from the classifier. It's not a mismatch.
Then we have this command:
$ tc qdisc add dev eth0 clasct
$ tc filter add dev eth0 ingress matchall skip_sw \
action mirred ingress mirror dev eth1 skip_hw
where there is a mismatch and it should be rejected.
Finally, we have:
$ tc qdisc add dev eth0 clasct
$ tc filter add dev eth0 ingress matchall skip_sw \
action mirred ingress mirror dev eth1 skip_sw
where the offload flags coincide, and this should be treated the same as
the first command based on inheritance, and accepted.
[1]: https://lore.kernel.org/netdev/20211028110646.13791-9-simon.horman@corigine.com/
[2]: https://lore.kernel.org/netdev/20211118130805.23897-10-simon.horman@corigine.com/
Fixes: 7adc57651211 ("flow_offload: add skip_hw and skip_sw to control if offload the action")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20241017161049.3570037-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
1e7962114c10 ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error")
165f87691a89 ("bnxt_en: add timestamping statistics support")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot found hanging tasks waiting on rtnl_lock [1]
A reproducer is available in the syzbot bug.
When a request to add multiple actions with the same index is sent, the
second request will block forever on the first request. This holds
rtnl_lock, and causes tasks to hang.
Return -EAGAIN to prevent infinite looping, while keeping documented
behavior.
[1]
INFO: task kworker/1:0:5088 blocked for more than 143 seconds.
Not tainted 6.9.0-rc4-syzkaller-00173-g3cdb45594619 #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/1:0 state:D stack:23744 pid:5088 tgid:5088 ppid:2 flags:0x00004000
Workqueue: events_power_efficient reg_check_chans_work
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5409 [inline]
__schedule+0xf15/0x5d00 kernel/sched/core.c:6746
__schedule_loop kernel/sched/core.c:6823 [inline]
schedule+0xe7/0x350 kernel/sched/core.c:6838
schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:6895
__mutex_lock_common kernel/locking/mutex.c:684 [inline]
__mutex_lock+0x5b8/0x9c0 kernel/locking/mutex.c:752
wiphy_lock include/net/cfg80211.h:5953 [inline]
reg_leave_invalid_chans net/wireless/reg.c:2466 [inline]
reg_check_chans_work+0x10a/0x10e0 net/wireless/reg.c:2481
Fixes: 0190c1d452a9 ("net: sched: atomically check-allocate action")
Reported-by: syzbot+b87c222546179f4513a7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b87c222546179f4513a7
Signed-off-by: David Ruth <druth@chromium.org>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240614190326.1349786-1-druth@chromium.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Toke mentioned unrcu_pointer() existence, allowing
to remove some of the ugly casts we have when using
xchg() for rcu protected pointers.
Also make inet_rcv_compat const.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20240604111603.45871-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The cls_,sch_,act_ modules may be loaded lazily during network
configuration but without user's awareness and control.
Switch the lazy loading from canonical module names to a module alias.
This allows finer control over lazy loading, the precedent from
commit 7f78e0351394 ("fs: Limit sys_mount to only request filesystem
modules.") explains it already:
Using aliases means user space can control the policy of which
filesystem^W net/sched modules are auto-loaded by editing
/etc/modprobe.d/*.conf with blacklist and alias directives.
Allowing simple, safe, well understood work-arounds to known
problematic software.
By default, nothing changes. However, if a specific module is
blacklisted (its canonical name), it won't be modprobe'd when requested
under its alias (i.e. kernel auto-loading). It would appear as if the
given module was unknown.
The module can still be loaded under its canonical name, which is an
explicit (privileged) user action.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240201130943.19536-4-mkoutny@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of using two bools derived from a flags passed as arguments to
the parent function of tc_action_load_ops, just pass the flags itself
to tc_action_load_ops to simplify its parameters.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Bound actions always return '0' and as of today we rely on '0'
being returned in order to properly skip bound actions in
tcf_idr_insert_many. In order to further improve maintainability,
introduce the ACT_P_BOUND return code.
Actions are updated to return 'ACT_P_BOUND' instead of plain '0'.
tcf_idr_insert_many is then updated to check for 'ACT_P_BOUND'.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231229132642.1489088-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Continue expanding Daniel's patch by adding new skb drop reasons that
are idiosyncratic to TC.
More specifically:
- SKB_DROP_REASON_TC_COOKIE_ERROR: An error occurred whilst
processing a tc ext cookie.
- SKB_DROP_REASON_TC_CHAIN_NOTFOUND: tc chain lookup failed.
- SKB_DROP_REASON_TC_RECLASSIFY_LOOP: tc exceeded max reclassify loop
iterations
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move drop_reason from struct tcf_result to skb cb - more specifically to
struct tc_skb_cb. With that, we'll be able to also set the drop reason for
the remaining qdiscs (aside from clsact) that do not have access to
tcf_result when time comes to set the skb drop reason.
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcf_idr_insert_many will replace the allocated -EBUSY pointer in
tcf_idr_check_alloc with the real action pointer, exposing it
to all operations. This operation is only needed when the action pointer
is created (ACT_P_CREATED). For actions which are bound to (returned 0),
the pointer already resides in the idr making such operation a nop.
Even though it's a nop, it's still not a cheap operation as internally
the idr code walks the idr and then does a replace on the appropriate slot.
So if the action was bound, better skip the idr replace entirely.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20231211181807.96028-3-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of relying only on the idrinfo->lock mutex for
bind/alloc logic, rely on a combination of rcu + mutex + atomics
to better scale the case where multiple rtnl-less filters are
binding to the same action object.
Action binding happens when an action index is specified explicitly and
an action exists which such index exists. Example:
tc actions add action drop index 1
tc filter add ... matchall action drop index 1
tc filter add ... matchall action drop index 1
tc filter add ... matchall action drop index 1
tc filter ls ...
filter protocol all pref 49150 matchall chain 0 filter protocol all pref 49150 matchall chain 0 handle 0x1
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 4 bind 3
filter protocol all pref 49151 matchall chain 0 filter protocol all pref 49151 matchall chain 0 handle 0x1
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 4 bind 3
filter protocol all pref 49152 matchall chain 0 filter protocol all pref 49152 matchall chain 0 handle 0x1
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 4 bind 3
When no index is specified, as before, grab the mutex and allocate
in the idr the next available id. In this version, as opposed to before,
it's simplified to store the -EBUSY pointer instead of the previous
alloc + replace combination.
When an index is specified, rely on rcu to find if there's an object in
such index. If there's none, fallback to the above, serializing on the
mutex and reserving the specified id. If there's one, it can be an -EBUSY
pointer, in which case we just try again until it's an action, or an action.
Given the rcu guarantees, the action found could be dead and therefore
we need to bump the refcount if it's not 0, handling the case it's
in fact 0.
As bind and the action refcount are already atomics, these increments can
happen without the mutex protection while many tcf_idr_check_alloc race
to bind to the same action instance.
In case binding encounters a parallel delete or add, it will return
-EAGAIN in order to try again. Both filter and action apis already
have the retry machinery in-place. In case it's an unlocked filter it
retries under the rtnl lock.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20231211181807.96028-2-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As of today tc-action events are unconditionally built and sent to
RTNLGRP_TC. As with the introduction of rtnl_notify_needed we can check
before-hand if they are really needed.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231208192847.714940-6-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use max() in a couple of places that are open coding it with the
ternary operator.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231208192847.714940-5-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The actions array is contiguous, so stop processing whenever a NULL
is found. This is already the assumption for tcf_action_destroy[1],
which is called from tcf_actions_init.
[1] https://elixir.bootlin.com/linux/v6.7-rc3/source/net/sched/act_api.c#L1115
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ops array is contiguous, so stop processing whenever a NULL is found
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In tcf_action_add, when putting the reference for the bound actions
it assigns NULLs to just created actions passing a non contiguous
array to tcf_action_put_many.
Refactor the code so the actions array is always contiguous.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the auxiliary macro tcf_act_for_each_action in all the
functions that expect a contiguous action array
Suggested-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Getting the following splat [1] with CONFIG_DEBUG_NET=y and this
reproducer [2]. Problem seems to be that classifiers clear 'struct
tcf_result::drop_reason', thereby triggering the warning in
__kfree_skb_reason() due to reason being 'SKB_NOT_DROPPED_YET' (0).
Fixed by disambiguating a legit error from a verdict with a bogus drop_reason
[1]
WARNING: CPU: 0 PID: 181 at net/core/skbuff.c:1082 kfree_skb_reason+0x38/0x130
Modules linked in:
CPU: 0 PID: 181 Comm: mausezahn Not tainted 6.6.0-rc6-custom-ge43e6d9582e0 #682
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
RIP: 0010:kfree_skb_reason+0x38/0x130
[...]
Call Trace:
<IRQ>
__netif_receive_skb_core.constprop.0+0x837/0xdb0
__netif_receive_skb_one_core+0x3c/0x70
process_backlog+0x95/0x130
__napi_poll+0x25/0x1b0
net_rx_action+0x29b/0x310
__do_softirq+0xc0/0x29b
do_softirq+0x43/0x60
</IRQ>
[2]
ip link add name veth0 type veth peer name veth1
ip link set dev veth0 up
ip link set dev veth1 up
tc qdisc add dev veth1 clsact
tc filter add dev veth1 ingress pref 1 proto all flower dst_mac 00:11:22:33:44:55 action drop
mausezahn veth0 -a own -b 00:11:22:33:44:55 -q -c 1
Ido reported:
[...] getting the following splat [1] with CONFIG_DEBUG_NET=y and this
reproducer [2]. Problem seems to be that classifiers clear 'struct
tcf_result::drop_reason', thereby triggering the warning in
__kfree_skb_reason() due to reason being 'SKB_NOT_DROPPED_YET' (0). [...]
[1]
WARNING: CPU: 0 PID: 181 at net/core/skbuff.c:1082 kfree_skb_reason+0x38/0x130
Modules linked in:
CPU: 0 PID: 181 Comm: mausezahn Not tainted 6.6.0-rc6-custom-ge43e6d9582e0 #682
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
RIP: 0010:kfree_skb_reason+0x38/0x130
[...]
Call Trace:
<IRQ>
__netif_receive_skb_core.constprop.0+0x837/0xdb0
__netif_receive_skb_one_core+0x3c/0x70
process_backlog+0x95/0x130
__napi_poll+0x25/0x1b0
net_rx_action+0x29b/0x310
__do_softirq+0xc0/0x29b
do_softirq+0x43/0x60
</IRQ>
[2]
#!/bin/bash
ip link add name veth0 type veth peer name veth1
ip link set dev veth0 up
ip link set dev veth1 up
tc qdisc add dev veth1 clsact
tc filter add dev veth1 ingress pref 1 proto all flower dst_mac 00:11:22:33:44:55 action drop
mausezahn veth0 -a own -b 00:11:22:33:44:55 -q -c 1
What happens is that inside most classifiers the tcf_result is copied over
from a filter template e.g. *res = f->res which then implicitly overrides
the prior SKB_DROP_REASON_TC_{INGRESS,EGRESS} default drop code which was
set via sch_handle_{ingress,egress}() for kfree_skb_reason().
Commit text above copied verbatim from Daniel. The general idea of the patch
is not very different from what Ido originally posted but instead done at the
cls_api codepath.
Fixes: 54a59aed395c ("net, sched: Make tc-related drop reason more flexible")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/netdev/ZTjY959R+AFXf3Xy@shredder
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
Direct replacement is safe here since return value of -errno
is used to check for truncation instead of sizeof(dest).
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
4 places in the act api code are using 'TCA_' definitions where they
should be using 'TCA_ACT_', which is confusing for the reader, although
functionally they are equivalent.
Cc: Hangbin Liu <haliu@redhat.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Hangbin Liu <haliu@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In my previous commit 0349b8779cc9 ("sched: add new attr TCA_EXT_WARN_MSG
to report tc extact message") I didn't notice the tc action use different
enum with filter. So we can't use TCA_EXT_WARN_MSG directly for tc action.
Let's add a TCA_ROOT_EXT_WARN_MSG for tc action specifically and put this
param before going to the TCA_ACT_TAB nest.
Fixes: 0349b8779cc9 ("sched: add new attr TCA_EXT_WARN_MSG to report tc extact message")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 923b2e30dc9cd05931da0f64e2e23d040865c035.
This is not a correct fix as TCA_EXT_WARN_MSG is not a hierarchy to
TCA_ACT_TAB. I didn't notice the TC actions use different enum when adding
TCA_EXT_WARN_MSG. To fix the difference I will add a new WARN enum in
TCA_ROOT_MAX as Jamal suggested.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TCA_EXT_WARN_MSG is currently sitting outside of the expected hierarchy
for the tc actions code. It should sit within TCA_ACT_TAB.
Fixes: 0349b8779cc9 ("sched: add new attr TCA_EXT_WARN_MSG to report tc extact message")
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For drivers to support partial offload of a filter's action list,
add support for action miss to specify an action instance to
continue from in sw.
CT action in particular can't be fully offloaded, as new connections
need to be handled in software. This imposes other limitations on
the actions that can be offloaded together with the CT action, such
as packet modifications.
Assign each action on a filter's action list a unique miss_cookie
which drivers can then use to fill action_miss part of the tc skb
extension. On getting back this miss_cookie, find the action
instance with relevant cookie and continue classifying from there.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
struct tc_action->act_cookie is a user defined cookie,
and the related struct flow_action_entry->act_cookie is
used as an handle similar to struct flow_cls_offload->cookie.
Rename tc_action->act_cookie to user_cookie, and
flow_action_entry->act_cookie to cookie so their names
would better fit their usage.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are currently two mechanisms for populating hardware stats:
1. Using flow_offload api to query the flow's statistics.
The api assumes that the same stats values apply to all
the flow's actions.
This assumption breaks when action drops or jumps over following
actions.
2. Using hw_action api to query specific action stats via a driver
callback method. This api assures the correct action stats for
the offloaded action, however, it does not apply to the rest of the
actions in the flow's actions array.
Extend the flow_offload stats callback to indicate that a per action
stats update is required.
Use the existing flow_offload_action api to query the action's hw stats.
In addition, currently the tc action stats utility only updates hw actions.
Reuse the existing action stats cb infrastructure to query any action
stats.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently a hardware action is uniquely identified by the <id, hw_index>
tuple. However, the id is set by the flow_act_setup callback and tc core
cannot enforce this, and it is possible that a future change could break
this. In addition, <id, hw_index> are not unique across network namespaces.
Uniquely identify the action by setting an action cookie by the tc core.
Use the unique action cookie to query the action's hardware stats.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently the hw action stats update is called from tcf_exts_hw_stats_update,
when a tc filter is dumped, and from tcf_action_copy_stats, when a hw
action is dumped.
However, the tcf_action_copy_stats is also called from tcf_action_dump.
As such, the hw action stats update cb is called 3 times for every
tc flower filter dump.
Move the tc action hw stats update from tcf_action_copy_stats to
tcf_dump_walker to update the hw action stats when tc action is dumped.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We will report extack message if there is an error via netlink_ack(). But
if the rule is not to be exclusively executed by the hardware, extack is not
passed along and offloading failures don't get logged.
In commit 81c7288b170a ("sched: cls: enable verbose logging") Marcelo
made cls could log verbose info for offloading failures, which helps
improving Open vSwitch debuggability when using flower offloading.
It would also be helpful if userspace monitor tools, like "tc monitor",
could log this kind of message, as it doesn't require vswitchd log level
adjusment. Let's add a new tc attributes to report the extack message so
the monitor program could receive the failures. e.g.
# tc monitor
added chain dev enp3s0f1np1 parent ffff: chain 0
added filter dev enp3s0f1np1 ingress protocol all pref 49152 flower chain 0 handle 0x1
ct_state +trk+new
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 1 bind 1
Warning: mlx5_core: matching on ct_state +new isn't supported.
In this patch I only report the extack message on add/del operations.
It doesn't look like we need to report the extack message on get/dump
operations.
Note this message not only reporte to multicast groups, it could also
be reported unicast, which may affect the current usersapce tool's behaivor.
Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230113034353.2766735-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Expose the necessary tc act functions and wire up act_api to use
direct calls in retpoline kernels.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Being able to get tc_action_net by using net_id stored in tc_action_ops
and execute the generic walk/search function, add __tcf_generic_walker()
and __tcf_idr_search() helpers.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If during an action flush operation one of the actions is still being
referenced, the flush operation is aborted and the kernel returns to
user space with an error. However, if the kernel was able to flush, for
example, 3 actions and failed on the fourth, the kernel will not notify
user space that it deleted 3 actions before failing.
This patch fixes that behaviour by notifying user space of how many
actions were deleted before flush failed and by setting extack with a
message describing what happened.
Fixes: 55334a5db5cd ("net_sched: act: refuse to remove bound action outside")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The callback is used by various actions to populate the flow action
structure prior to offload. Pass extack to this callback so that the
various actions will be able to report accurate error messages to user
space.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add extack message to return exact message to user when adding invalid
filter with conflict flags for TC action.
In previous implement we just return EINVAL which is confusing for user.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Link: https://lore.kernel.org/r/1646191769-17761-1-git-send-email-baowen.zheng@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix following coccicheck warning:
./net/sched/act_api.c:277:7-49: WARNING avoid newline at end of message
in NL_SET_ERR_MSG_MOD
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have been living dangerously, at the mercy of malicious users,
abusing TC_ACT_REPEAT, as shown by this syzpot report [1].
Add an arbitrary limit (32) to the number of times an action can
return TC_ACT_REPEAT.
v2: switch the limit to 32 instead of 10.
Use net_warn_ratelimited() instead of pr_err_once().
[1] (C repro available on demand)
rcu: INFO: rcu_preempt self-detected stall on CPU
rcu: 1-...!: (10500 ticks this GP) idle=021/1/0x4000000000000000 softirq=5592/5592 fqs=0
(t=10502 jiffies g=5305 q=190)
rcu: rcu_preempt kthread timer wakeup didn't happen for 10502 jiffies! g5305 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402
rcu: Possible timer handling issue on cpu=0 timer-softirq=3527
rcu: rcu_preempt kthread starved for 10505 jiffies! g5305 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0
rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt state:I stack:29344 pid: 14 ppid: 2 flags:0x00004000
Call Trace:
<TASK>
context_switch kernel/sched/core.c:4986 [inline]
__schedule+0xab2/0x4db0 kernel/sched/core.c:6295
schedule+0xd2/0x260 kernel/sched/core.c:6368
schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881
rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1963
rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2136
kthread+0x2e9/0x3a0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
rcu: Stack dump where RCU GP kthread last ran:
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 3646 Comm: syz-executor358 Not tainted 5.17.0-rc3-syzkaller-00149-gbf8e59fd315f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:rep_nop arch/x86/include/asm/vdso/processor.h:13 [inline]
RIP: 0010:cpu_relax arch/x86/include/asm/vdso/processor.h:18 [inline]
RIP: 0010:pv_wait_head_or_lock kernel/locking/qspinlock_paravirt.h:437 [inline]
RIP: 0010:__pv_queued_spin_lock_slowpath+0x3b8/0xb40 kernel/locking/qspinlock.c:508
Code: 48 89 eb c6 45 01 01 41 bc 00 80 00 00 48 c1 e9 03 83 e3 07 41 be 01 00 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8d 2c 01 eb 0c <f3> 90 41 83 ec 01 0f 84 72 04 00 00 41 0f b6 45 00 38 d8 7f 08 84
RSP: 0018:ffffc9000283f1b0 EFLAGS: 00000206
RAX: 0000000000000003 RBX: 0000000000000000 RCX: 1ffff1100fc0071e
RDX: 0000000000000001 RSI: 0000000000000201 RDI: 0000000000000000
RBP: ffff88807e0038f0 R08: 0000000000000001 R09: ffffffff8ffbf9ff
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000004c1e
R13: ffffed100fc0071e R14: 0000000000000001 R15: ffff8880b9c3aa80
FS: 00005555562bf300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffdbfef12b8 CR3: 00000000723c2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
pv_queued_spin_lock_slowpath arch/x86/include/asm/paravirt.h:591 [inline]
queued_spin_lock_slowpath arch/x86/include/asm/qspinlock.h:51 [inline]
queued_spin_lock include/asm-generic/qspinlock.h:85 [inline]
do_raw_spin_lock+0x200/0x2b0 kernel/locking/spinlock_debug.c:115
spin_lock_bh include/linux/spinlock.h:354 [inline]
sch_tree_lock include/net/sch_generic.h:610 [inline]
sch_tree_lock include/net/sch_generic.h:605 [inline]
prio_tune+0x3b9/0xb50 net/sched/sch_prio.c:211
prio_init+0x5c/0x80 net/sched/sch_prio.c:244
qdisc_create.constprop.0+0x44a/0x10f0 net/sched/sch_api.c:1253
tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660
rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5594
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:725
____sys_sendmsg+0x6e8/0x810 net/socket.c:2413
___sys_sendmsg+0xf3/0x170 net/socket.c:2467
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2496
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f7ee98aae99
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffdbfef12d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007ffdbfef1300 RCX: 00007f7ee98aae99
RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000003
RBP: 0000000000000000 R08: 000000000000000d R09: 000000000000000d
R10: 000000000000000d R11: 0000000000000246 R12: 00007ffdbfef12f0
R13: 00000000000f4240 R14: 000000000004ca47 R15: 00007ffdbfef12e4
</TASK>
INFO: NMI handler (nmi_cpu_backtrace_handler) took too long to run: 2.293 msecs
NMI backtrace for cpu 1
CPU: 1 PID: 3260 Comm: kworker/1:3 Not tainted 5.17.0-rc3-syzkaller-00149-gbf8e59fd315f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: mld mld_ifc_work
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
nmi_cpu_backtrace.cold+0x47/0x144 lib/nmi_backtrace.c:111
nmi_trigger_cpumask_backtrace+0x1b3/0x230 lib/nmi_backtrace.c:62
trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline]
rcu_dump_cpu_stacks+0x25e/0x3f0 kernel/rcu/tree_stall.h:343
print_cpu_stall kernel/rcu/tree_stall.h:604 [inline]
check_cpu_stall kernel/rcu/tree_stall.h:688 [inline]
rcu_pending kernel/rcu/tree.c:3919 [inline]
rcu_sched_clock_irq.cold+0x5c/0x759 kernel/rcu/tree.c:2617
update_process_times+0x16d/0x200 kernel/time/timer.c:1785
tick_sched_handle+0x9b/0x180 kernel/time/tick-sched.c:226
tick_sched_timer+0x1b0/0x2d0 kernel/time/tick-sched.c:1428
__run_hrtimer kernel/time/hrtimer.c:1685 [inline]
__hrtimer_run_queues+0x1c0/0xe50 kernel/time/hrtimer.c:1749
hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811
local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline]
__sysvec_apic_timer_interrupt+0x146/0x530 arch/x86/kernel/apic/apic.c:1103
sysvec_apic_timer_interrupt+0x8e/0xc0 arch/x86/kernel/apic/apic.c:1097
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638
RIP: 0010:__sanitizer_cov_trace_const_cmp4+0xc/0x70 kernel/kcov.c:286
Code: 00 00 00 48 89 7c 30 e8 48 89 4c 30 f0 4c 89 54 d8 20 48 89 10 5b c3 0f 1f 80 00 00 00 00 41 89 f8 bf 03 00 00 00 4c 8b 14 24 <89> f1 65 48 8b 34 25 00 70 02 00 e8 14 f9 ff ff 84 c0 74 4b 48 8b
RSP: 0018:ffffc90002c5eea8 EFLAGS: 00000246
RAX: 0000000000000007 RBX: ffff88801c625800 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: ffff8880137d3100 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff874fcd88 R11: 0000000000000000 R12: ffff88801d692dc0
R13: ffff8880137d3104 R14: 0000000000000000 R15: ffff88801d692de8
tcf_police_act+0x358/0x11d0 net/sched/act_police.c:256
tcf_action_exec net/sched/act_api.c:1049 [inline]
tcf_action_exec+0x1a6/0x530 net/sched/act_api.c:1026
tcf_exts_exec include/net/pkt_cls.h:326 [inline]
route4_classify+0xef0/0x1400 net/sched/cls_route.c:179
__tcf_classify net/sched/cls_api.c:1549 [inline]
tcf_classify+0x3e8/0x9d0 net/sched/cls_api.c:1615
prio_classify net/sched/sch_prio.c:42 [inline]
prio_enqueue+0x3a7/0x790 net/sched/sch_prio.c:75
dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3668
__dev_xmit_skb net/core/dev.c:3756 [inline]
__dev_queue_xmit+0x1f61/0x3660 net/core/dev.c:4081
neigh_hh_output include/net/neighbour.h:533 [inline]
neigh_output include/net/neighbour.h:547 [inline]
ip_finish_output2+0x14dc/0x2170 net/ipv4/ip_output.c:228
__ip_finish_output net/ipv4/ip_output.c:306 [inline]
__ip_finish_output+0x396/0x650 net/ipv4/ip_output.c:288
ip_finish_output+0x32/0x200 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip_output+0x196/0x310 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:451 [inline]
ip_local_out+0xaf/0x1a0 net/ipv4/ip_output.c:126
iptunnel_xmit+0x628/0xa50 net/ipv4/ip_tunnel_core.c:82
geneve_xmit_skb drivers/net/geneve.c:966 [inline]
geneve_xmit+0x10c8/0x3530 drivers/net/geneve.c:1077
__netdev_start_xmit include/linux/netdevice.h:4683 [inline]
netdev_start_xmit include/linux/netdevice.h:4697 [inline]
xmit_one net/core/dev.c:3473 [inline]
dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3489
__dev_queue_xmit+0x2985/0x3660 net/core/dev.c:4116
neigh_hh_output include/net/neighbour.h:533 [inline]
neigh_output include/net/neighbour.h:547 [inline]
ip6_finish_output2+0xf7a/0x14f0 net/ipv6/ip6_output.c:126
__ip6_finish_output net/ipv6/ip6_output.c:191 [inline]
__ip6_finish_output+0x61e/0xe90 net/ipv6/ip6_output.c:170
ip6_finish_output+0x32/0x200 net/ipv6/ip6_output.c:201
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:224
dst_output include/net/dst.h:451 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
NF_HOOK include/linux/netfilter.h:301 [inline]
mld_sendpack+0x9a3/0xe40 net/ipv6/mcast.c:1826
mld_send_cr net/ipv6/mcast.c:2127 [inline]
mld_ifc_work+0x71c/0xdc0 net/ipv6/mcast.c:2659
process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307
worker_thread+0x657/0x1110 kernel/workqueue.c:2454
kthread+0x2e9/0x3a0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
----------------
Code disassembly (best guess):
0: 48 89 eb mov %rbp,%rbx
3: c6 45 01 01 movb $0x1,0x1(%rbp)
7: 41 bc 00 80 00 00 mov $0x8000,%r12d
d: 48 c1 e9 03 shr $0x3,%rcx
11: 83 e3 07 and $0x7,%ebx
14: 41 be 01 00 00 00 mov $0x1,%r14d
1a: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax
21: fc ff df
24: 4c 8d 2c 01 lea (%rcx,%rax,1),%r13
28: eb 0c jmp 0x36
* 2a: f3 90 pause <-- trapping instruction
2c: 41 83 ec 01 sub $0x1,%r12d
30: 0f 84 72 04 00 00 je 0x4a8
36: 41 0f b6 45 00 movzbl 0x0(%r13),%eax
3b: 38 d8 cmp %bl,%al
3d: 7f 08 jg 0x47
3f: 84 .byte 0x84
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220215235305.3272331-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix suspicious rcu_dereference_protected() usage when offloading tc action.
We should hold tcfa_lock to offload tc action in action initiation.
Without these changes, the following warning will be observed:
WARNING: suspicious RCU usage
5.16.0-rc5-net-next-01504-g7d1f236dcffa-dirty #50 Tainted: G I
-----------------------------
include/net/tc_act/tc_tunnel_key.h:33 suspicious rcu_dereference_protected() usage!
1 lock held by tc/12108:
CPU: 4 PID: 12108 Comm: tc Tainted: G
Hardware name: Dell Inc. PowerEdge R740/07WCGN, BIOS 1.6.11 11/20/2018
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x5e
dump_stack+0x10/0x12
lockdep_rcu_suspicious+0xed/0xf8
tcf_tunnel_key_offload_act_setup+0x1de/0x300 [act_tunnel_key]
tcf_action_offload_add_ex+0xc0/0x1f0
tcf_action_init+0x26a/0x2f0
tcf_action_add+0xa9/0x1f0
tc_ctl_action+0xfb/0x170
rtnetlink_rcv_msg+0x169/0x510
? sched_clock+0x9/0x10
? rtnl_newlink+0x70/0x70
netlink_rcv_skb+0x55/0x100
rtnetlink_rcv+0x15/0x20
netlink_unicast+0x1a8/0x270
netlink_sendmsg+0x245/0x490
sock_sendmsg+0x65/0x70
____sys_sendmsg+0x219/0x260
? __import_iovec+0x2c/0x150
___sys_sendmsg+0xb7/0x100
? __lock_acquire+0x3d5/0x1f40
? __this_cpu_preempt_check+0x13/0x20
? lock_is_held_type+0xe4/0x140
? sched_clock+0x9/0x10
? ktime_get_coarse_real_ts64+0xbe/0xd0
? __this_cpu_preempt_check+0x13/0x20
? lockdep_hardirqs_on+0x7e/0x100
? ktime_get_coarse_real_ts64+0xbe/0xd0
? trace_hardirqs_on+0x2a/0xf0
__sys_sendmsg+0x5a/0xa0
? syscall_trace_enter.constprop.0+0x1dd/0x220
__x64_sys_sendmsg+0x1f/0x30
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f4db7bb7a60
Fixes: 8cbfe939abe9 ("flow_offload: allow user to offload tc action to net device")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add process to validate flags of filter and actions when adding
a tc filter.
We need to prevent adding filter with flags conflicts with its actions.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add reoffload process to update hw_count when driver
is inserted or removed.
We will delete the action if it is with skip_sw flag and
not offloaded to any hardware in reoffload process.
When reoffloading actions, we still offload the actions
that are added independent of filters.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Save full action flags and return user flags when return flags to
user space.
Save full action flags to distinguish if the action is created
independent from classifier.
We made this change mainly for further patch to reoffload tc actions.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When collecting stats for actions update them using both
hardware and software counters.
Stats update process should not run in context of preempt_disable.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We add skip_hw and skip_sw for user to control if offload the action
to hardware.
We also add in_hw_count for user to indicate if the action is offloaded
to any hardware.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use flow_indr_dev_register/flow_indr_dev_setup_offload to
offload tc action.
We need to call tc_cleanup_flow_action to clean up tc action entry since
in tc_setup_action, some actions may hold dev refcnt, especially the mirror
action.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Qdisc::running sequence counter has two uses:
1. Reliably reading qdisc's tc statistics while the qdisc is running
(a seqcount read/retry loop at gnet_stats_add_basic()).
2. As a flag, indicating whether the qdisc in question is running
(without any retry loops).
For the first usage, the Qdisc::running sequence counter write section,
qdisc_run_begin() => qdisc_run_end(), covers a much wider area than what
is actually needed: the raw qdisc's bstats update. A u64_stats sync
point was thus introduced (in previous commits) inside the bstats
structure itself. A local u64_stats write section is then started and
stopped for the bstats updates.
Use that u64_stats sync point mechanism for the bstats read/retry loop
at gnet_stats_add_basic().
For the second qdisc->running usage, a __QDISC_STATE_RUNNING bit flag,
accessed with atomic bitops, is sufficient. Using a bit flag instead of
a sequence counter at qdisc_run_begin/end() and qdisc_is_running() leads
to the SMP barriers implicitly added through raw_read_seqcount() and
write_seqcount_begin/end() getting removed. All call sites have been
surveyed though, and no required ordering was identified.
Now that the qdisc->running sequence counter is no longer used, remove
it.
Note, using u64_stats implies no sequence counter protection for 64-bit
architectures. This can lead to the qdisc tc statistics "packets" vs.
"bytes" values getting out of sync on rare occasions. The individual
values will still be valid.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The only factor differentiating per-CPU bstats data type (struct
gnet_stats_basic_cpu) from the packed non-per-CPU one (struct
gnet_stats_basic_packed) was a u64_stats sync point inside the former.
The two data types are now equivalent: earlier commits added a u64_stats
sync point to the latter.
Combine both data types into "struct gnet_stats_basic_sync". This
eliminates redundancy and simplifies the bstats read/write APIs.
Use u64_stats_t for bstats "packets" and "bytes" data types. On 64-bit
architectures, u64_stats sync points do not use sequence counter
protection.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The not-per-CPU variant of qdisc tc (traffic control) statistics,
Qdisc::gnet_stats_basic_packed bstats, is protected with Qdisc::running
sequence counter.
This sequence counter is used for reliably protecting bstats reads from
parallel writes. Meanwhile, the seqcount's write section covers a much
wider area than bstats update: qdisc_run_begin() => qdisc_run_end().
That read/write section asymmetry can lead to needless retries of the
read section. To prepare for removing the Qdisc::running sequence
counter altogether, introduce a u64_stats sync point inside bstats
instead.
Modify _bstats_update() to start/end the bstats u64_stats write
section.
For bisectability, and finer commits granularity, the bstats read
section is still protected with a Qdisc::running read/retry loop and
qdisc_run_begin/end() still starts/ends that seqcount write section.
Once all call sites are modified to use _bstats_update(), the
Qdisc::running seqcount will be removed and bstats read/retry loop will
be modified to utilize the internal u64_stats sync point.
Note, using u64_stats implies no sequence counter protection for 64-bit
architectures. This can lead to the statistics "packets" vs. "bytes"
values getting out of sync on rare occasions. The individual values will
still be valid.
[bigeasy: Minor commit message edits, init all gnet_stats_basic_packed.]
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TC action ->init() API has 10 parameters, it becomes harder
to read. Some of them are just boolean and can be replaced
by flags. Similarly for the internal API tcf_action_init()
and tcf_exts_validate().
This patch converts them to flags and fold them into
the upper 16 bits of "flags", whose lower 16 bits are still
reserved for user-space. More specifically, the following
kernel flags are introduced:
TCA_ACT_FLAGS_POLICE replace 'name' in a few contexts, to
distinguish whether it is compatible with policer.
TCA_ACT_FLAGS_BIND replaces 'bind', to indicate whether
this action is bound to a filter.
TCA_ACT_FLAGS_REPLACE replaces 'ovr' in most contexts,
means we are replacing an existing action.
TCA_ACT_FLAGS_NO_RTNL replaces 'rtnl_held' but has the
opposite meaning, because we still hold RTNL in most
cases.
The only user-space flag TCA_ACT_FLAGS_NO_PERCPU_STATS is
untouched and still stored as before.
I have tested this patch with tdc and I do not see any
failure related to this patch.
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Acked-by: Jamal Hadi Salim<jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It has been deal with the 'if (err' statement in rtnetlink_send()
and rtnl_unicast(). so remove unnecessary if statement.
v2: use the raw name rtnetlink_send().
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When nla_put_u32() fails, 'ret' could be 0, it should
return error code in tcf_del_walker().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With recent changes that separated action module load from action
initialization tcf_action_init() function error handling code was modified
to manually release the loaded modules if loading/initialization of any
further action in same batch failed. For the case when all modules
successfully loaded and some of the actions were initialized before one of
them failed in init handler. In this case for all previous actions the
module will be released twice by the error handler: First time by the loop
that manually calls module_put() for all ops, and second time by the action
destroy code that puts the module after destroying the action.
Reproduction:
$ sudo tc actions add action simple sdata \"2\" index 2
$ sudo tc actions add action simple sdata \"1\" index 1 \
action simple sdata \"2\" index 2
RTNETLINK answers: File exists
We have an error talking to the kernel
$ sudo tc actions ls action simple
total acts 1
action order 0: Simple <"2">
index 2 ref 1 bind 0
$ sudo tc actions flush action simple
$ sudo tc actions ls action simple
$ sudo tc actions add action simple sdata \"2\" index 2
Error: Failed to load TC action module.
We have an error talking to the kernel
$ lsmod | grep simple
act_simple 20480 -1
Fix the issue by modifying module reference counting handling in action
initialization code:
- Get module reference in tcf_idr_create() and put it in tcf_idr_release()
instead of taking over the reference held by the caller.
- Modify users of tcf_action_init_1() to always release the module
reference which they obtain before calling init function instead of
assuming that created action takes over the reference.
- Finally, modify tcf_action_init_1() to not release the module reference
when overwriting existing action as this is no longer necessary since both
upper and lower layers obtain and manage their own module references
independently.
Fixes: d349f9976868 ("net_sched: fix RTNL deadlock again caused by request_module()")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
