summaryrefslogtreecommitdiff
path: root/net/openvswitch
AgeCommit message (Collapse)AuthorFilesLines
2014-06-05vxlan: Add support for UDP checksums (v4 sending, v6 zero csums)Tom Herbert1-1/+1
Added VXLAN link configuration for sending UDP checksums, and allowing TX and RX of UDP6 checksums. Also, call common iptunnel_handle_offloads and added GSO support for checksums. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-23openvswitch: Simplify genetlink code.Pravin B Shelar1-95/+90
Following patch get rid of struct genl_family_and_ops which is redundant due to changes to struct genl_family. Signed-off-by: Kyle Mestery <mestery@noironetworks.com> Acked-by: Kyle Mestery <mestery@noironetworks.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-23openvswitch: Minimize ovs_flow_cmd_new|set critical sections.Jarno Rajahalme1-76/+116
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-23openvswitch: Split ovs_flow_cmd_new_or_set().Jarno Rajahalme1-44/+116
Following patch will be easier to reason about with separate ovs_flow_cmd_new() and ovs_flow_cmd_set() functions. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-23openvswitch: Minimize ovs_flow_cmd_del critical section.Jarno Rajahalme1-25/+28
ovs_flow_cmd_del() now allocates reply (if needed) after the flow has already been removed from the flow table. If the reply allocation fails, a netlink error is signaled with netlink_set_err(), as is already done in ovs_flow_cmd_new_or_set() in the similar situation. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-23openvswitch: Reduce locking requirements.Jarno Rajahalme1-25/+29
Reduce and clarify locking requirements for ovs_flow_cmd_alloc_info(), ovs_flow_cmd_fill_info() and ovs_flow_cmd_build_info(). A datapath pointer is available only when holding a lock. Change ovs_flow_cmd_fill_info() and ovs_flow_cmd_build_info() to take a dp_ifindex directly, rather than a datapath pointer that is then (only) used to get the dp_ifindex. This is useful, since the dp_ifindex is available even when the datapath pointer is not, both before and after taking a lock, which makes further critical section reduction possible. Make ovs_flow_cmd_alloc_info() take an 'acts' argument instead a 'flow' pointer. This allows some future patches to do the allocation before acquiring the flow pointer. The locking requirements after this patch are: ovs_flow_cmd_alloc_info(): May be called without locking, must not be called while holding the RCU read lock (due to memory allocation). If 'acts' belong to a flow in the flow table, however, then the caller must hold ovs_mutex. ovs_flow_cmd_fill_info(): Either ovs_mutex or RCU read lock must be held. ovs_flow_cmd_build_info(): This calls both of the above, so the caller must hold ovs_mutex. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-23openvswitch: Fix ovs_flow_stats_get/clear RCU dereference.Jarno Rajahalme2-7/+9
For ovs_flow_stats_get() using ovsl_dereference() was wrong, since flow dumps call this with RCU read lock. ovs_flow_stats_clear() is always called with ovs_mutex, so can use ovsl_dereference(). Also, make the ovs_flow_stats_get() 'flow' argument const to make later patches cleaner. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-23openvswitch: Fix typo.Jarno Rajahalme1-1/+1
Incorrect struct name was confusing, even though otherwise inconsequental. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-23openvswitch: Minimize dp and vport critical sections.Jarno Rajahalme1-108/+110
Move most memory allocations away from the ovs_mutex critical sections. vport allocations still happen while the lock is taken, as changing that would require major refactoring. Also, vports are created very rarely so it should not matter. Change ovs_dp_cmd_get() now only takes the rcu_read_lock(), rather than ovs_lock(), as nothing need to be changed. This was done by ovs_vport_cmd_get() already. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-23openvswitch: Make flow mask removal symmetric.Jarno Rajahalme1-19/+25
Masks are inserted when flows are inserted to the table, so it is logical to correspondingly remove masks when flows are removed from the table, in ovs_flow_table_remove(). This allows ovs_flow_free() to be called without locking, which will be used by later patches. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-23openvswitch: Build flow cmd netlink reply only if needed.Jarno Rajahalme1-22/+48
Use netlink_has_listeners() and NLM_F_ECHO flag to determine if a reply is needed or not for OVS_FLOW_CMD_NEW, OVS_FLOW_CMD_SET, or OVS_FLOW_CMD_DEL. Currently, OVS userspace does not request a reply for OVS_FLOW_CMD_NEW, but usually does for OVS_FLOW_CMD_DEL, as stats may have changed. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-23openvswitch: Clarify locking.Jarno Rajahalme2-7/+9
Remove unnecessary locking from functions that are always called with appropriate locking. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Thomas Graf <tgraf@redhat.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-23openvswitch: Avoid assigning a NULL pointer to flow actions.Jarno Rajahalme1-6/+8
Flow SET can accept an empty set of actions, with the intended semantics of leaving existing actions unmodified. This seems to have been brokin after OVS 1.7, as we have assigned the flow's actions pointer to NULL in this case, but we never check for the NULL pointer later on. This patch restores the intended behavior and documents it in the include/linux/openvswitch.h. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-23openvswitch: Compact sw_flow_key.Jarno Rajahalme3-123/+62
Minimize padding in sw_flow_key and move 'tp' top the main struct. These changes simplify code when accessing the transport port numbers and the tcp flags, and makes the sw_flow_key 8 bytes smaller on 64-bit systems (128->120 bytes). These changes also make the keys for IPv4 packets to fit in one cache line. There is a valid concern for safety of packing the struct ovs_key_ipv4_tunnel, as it would be possible to take the address of the tun_id member as a __be64 * which could result in unaligned access in some systems. However: - sw_flow_key itself is 64-bit aligned, so the tun_id within is always 64-bit aligned. - We never make arrays of ovs_key_ipv4_tunnel (which would force every second tun_key to be misaligned). - We never take the address of the tun_id in to a __be64 *. - Whereever we use struct ovs_key_ipv4_tunnel outside the sw_flow_key, it is in stack (on tunnel input functions), where compiler has full control of the alignment. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-17net/openvswitch: Use with RCU_INIT_POINTER(x, NULL) in vport-gre.cMonam Agarwal1-1/+1
This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL) The rcu_assign_pointer() ensures that the initialization of a structure is carried out before storing a pointer to that structure. And in the case of the NULL pointer, there is no structure to initialize. So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL) Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-17openvswitch: Use TCP flags in the flow key for stats.Jarno Rajahalme1-7/+5
We already extract the TCP flags for the key, might as well use that for stats. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-17openvswitch: Fix output of SCTP mask.Jarno Rajahalme1-4/+4
The 'output' argument of the ovs_nla_put_flow() is the one from which the bits are written to the netlink attributes. For SCTP we accidentally used the bits from the 'swkey' instead. This caused the mask attributes to include the bits from the actual flow key instead of the mask. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-17openvswitch: Per NUMA node flow stats.Jarno Rajahalme4-55/+122
Keep kernel flow stats for each NUMA node rather than each (logical) CPU. This avoids using the per-CPU allocator and removes most of the kernel-side OVS locking overhead otherwise on the top of perf reports and allows OVS to scale better with higher number of threads. With 9 handlers and 4 revalidators netperf TCP_CRR test flow setup rate doubles on a server with two hyper-threaded physical CPUs (16 logical cores each) compared to the current OVS master. Tested with non-trivial flow table with a TCP port match rule forcing all new connections with unique port numbers to OVS userspace. The IP addresses are still wildcarded, so the kernel flows are not considered as exact match 5-tuple flows. This type of flows can be expected to appear in large numbers as the result of more effective wildcarding made possible by improvements in OVS userspace flow classifier. Perf results for this test (master): Events: 305K cycles + 8.43% ovs-vswitchd [kernel.kallsyms] [k] mutex_spin_on_owner + 5.64% ovs-vswitchd [kernel.kallsyms] [k] __ticket_spin_lock + 4.75% ovs-vswitchd ovs-vswitchd [.] find_match_wc + 3.32% ovs-vswitchd libpthread-2.15.so [.] pthread_mutex_lock + 2.61% ovs-vswitchd [kernel.kallsyms] [k] pcpu_alloc_area + 2.19% ovs-vswitchd ovs-vswitchd [.] flow_hash_in_minimask_range + 2.03% swapper [kernel.kallsyms] [k] intel_idle + 1.84% ovs-vswitchd libpthread-2.15.so [.] pthread_mutex_unlock + 1.64% ovs-vswitchd ovs-vswitchd [.] classifier_lookup + 1.58% ovs-vswitchd libc-2.15.so [.] 0x7f4e6 + 1.07% ovs-vswitchd [kernel.kallsyms] [k] memset + 1.03% netperf [kernel.kallsyms] [k] __ticket_spin_lock + 0.92% swapper [kernel.kallsyms] [k] __ticket_spin_lock ... And after this patch: Events: 356K cycles + 6.85% ovs-vswitchd ovs-vswitchd [.] find_match_wc + 4.63% ovs-vswitchd libpthread-2.15.so [.] pthread_mutex_lock + 3.06% ovs-vswitchd [kernel.kallsyms] [k] __ticket_spin_lock + 2.81% ovs-vswitchd ovs-vswitchd [.] flow_hash_in_minimask_range + 2.51% ovs-vswitchd libpthread-2.15.so [.] pthread_mutex_unlock + 2.27% ovs-vswitchd ovs-vswitchd [.] classifier_lookup + 1.84% ovs-vswitchd libc-2.15.so [.] 0x15d30f + 1.74% ovs-vswitchd [kernel.kallsyms] [k] mutex_spin_on_owner + 1.47% swapper [kernel.kallsyms] [k] intel_idle + 1.34% ovs-vswitchd ovs-vswitchd [.] flow_hash_in_minimask + 1.33% ovs-vswitchd ovs-vswitchd [.] rule_actions_unref + 1.16% ovs-vswitchd ovs-vswitchd [.] hindex_node_with_hash + 1.16% ovs-vswitchd ovs-vswitchd [.] do_xlate_actions + 1.09% ovs-vswitchd ovs-vswitchd [.] ofproto_rule_ref + 1.01% netperf [kernel.kallsyms] [k] __ticket_spin_lock ... There is a small increase in kernel spinlock overhead due to the same spinlock being shared between multiple cores of the same physical CPU, but that is barely visible in the netperf TCP_CRR test performance (maybe ~1% performance drop, hard to tell exactly due to variance in the test results), when testing for kernel module throughput (with no userspace activity, handful of kernel flows). On flow setup, a single stats instance is allocated (for the NUMA node 0). As CPUs from multiple NUMA nodes start updating stats, new NUMA-node specific stats instances are allocated. This allocation on the packet processing code path is made to never block or look for emergency memory pools, minimizing the allocation latency. If the allocation fails, the existing preallocated stats instance is used. Also, if only CPUs from one NUMA-node are updating the preallocated stats instance, no additional stats instances are allocated. This eliminates the need to pre-allocate stats instances that will not be used, also relieving the stats reader from the burden of reading stats that are never used. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-17openvswitch: Remove 5-tuple optimization.Jarno Rajahalme7-113/+32
The 5-tuple optimization becomes unnecessary with a later per-NUMA node stats patch. Remove it first to make the changes easier to grasp. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-17openvswitch: Use ether_addr_copyJoe Perches3-16/+16
It's slightly smaller/faster for some architectures. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-17openvswitch: flow_netlink: Use pr_fmt to OVS_NLERR outputJoe Perches1-0/+2
Add "openvswitch: " prefix to OVS_NLERR output to match the other OVS_NLERR output of datapath.c Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-17openvswitch: Use net_ratelimit in OVS_NLERRJoe Perches1-3/+5
Each use of pr_<level>_once has a per-site flag. Some of the OVS_NLERR messages look as if seeing them multiple times could be useful, so use net_ratelimit() instead of pr_info_once. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-17openvswitch: Added (unsigned long long) cast in printfDaniele Di Proietto1-2/+2
This is necessary, since u64 is not unsigned long long in all architectures: u64 could be also uint64_t. Signed-off-by: Daniele Di Proietto <daniele.di.proietto@gmail.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-17openvswitch: avoid cast-qual warning in vport_privDaniele Di Proietto1-1/+1
This function must cast a const value to a non const value. By adding an uintptr_t cast the warning is suppressed. To avoid the cast (proper solution) several function signatures must be changed. Signed-off-by: Daniele Di Proietto <daniele.di.proietto@gmail.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-17openvswitch: avoid warnings in vport_from_privDaniele Di Proietto1-2/+2
This change, firstly, avoids declaring the formal parameter const, since it is treated as non const. (to avoid -Wcast-qual) Secondly, it cast the pointer from void* to u8*, since it is used in arithmetic (to avoid -Wpointer-arith) Signed-off-by: Daniele Di Proietto <daniele.di.proietto@gmail.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-17openvswitch: use const in some local vars and castsDaniele Di Proietto2-9/+13
In few functions, const formal parameters are assigned or cast to non-const. These changes suppress warnings if compiled with -Wcast-qual. Signed-off-by: Daniele Di Proietto <daniele.di.proietto@gmail.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-14net: get rid of SET_ETHTOOL_OPSWilfried Klaebe1-1/+1
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12net: rename local_df to ignore_dfWANG Cong2-2/+2
As suggested by several people, rename local_df to ignore_df, since it means "ignore df bit if it is set". Cc: Maciej Żenczykowski <maze@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-25vxlan: add x-netns supportNicolas Dichtel1-1/+2
This patch allows to switch the netns when packet is encapsulated or decapsulated. The vxlan socket is openned into the i/o netns, ie into the netns where encapsulated packets are received. The socket lookup is done into this netns to find the corresponding vxlan tunnel. After decapsulation, the packet is injecting into the corresponding interface which may stand to another netns. When one of the two netns is removed, the tunnel is destroyed. Configuration example: ip netns add netns1 ip netns exec netns1 ip link set lo up ip link add vxlan10 type vxlan id 10 group 239.0.0.10 dev eth0 dstport 0 ip link set vxlan10 netns netns1 ip netns exec netns1 ip addr add 192.168.0.249/24 broadcast 192.168.0.255 dev vxlan10 ip netns exec netns1 ip link set vxlan10 up Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-15ipv4: add a sock pointer to dst->output() path.Eric Dumazet1-1/+1
In the dst->output() path for ipv4, the code assumes the skb it has to transmit is attached to an inet socket, specifically via ip_mc_output() : The sk_mc_loop() test triggers a WARN_ON() when the provider of the packet is an AF_PACKET socket. The dst->output() method gets an additional 'struct sock *sk' parameter. This needs a cascade of changes so that this parameter can be propagated from vxlan to final consumer. Fixes: 8f646c922d55 ("vxlan: keep original skb ownership") Reported-by: lucien xin <lucien.xin@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-21/+11
Conflicts: drivers/net/ethernet/marvell/mvneta.c The mvneta.c conflict is a case of overlapping changes, a conversion to devm_ioremap_resource() vs. a conversion to netdev_alloc_pcpu_stats. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-29openvswitch: fix a possible deadlock and lockdep warningFlavio Leitner1-20/+6
There are two problematic situations. A deadlock can happen when is_percpu is false because it can get interrupted while holding the spinlock. Then it executes ovs_flow_stats_update() in softirq context which tries to get the same lock. The second sitation is that when is_percpu is true, the code correctly disables BH but only for the local CPU, so the following can happen when locking the remote CPU without disabling BH: CPU#0 CPU#1 ovs_flow_stats_get() stats_read() +->spin_lock remote CPU#1 ovs_flow_stats_get() | <interrupted> stats_read() | ... +--> spin_lock remote CPU#0 | | <interrupted> | ovs_flow_stats_update() | ... | spin_lock local CPU#0 <--+ ovs_flow_stats_update() +---------------------------------- spin_lock local CPU#1 This patch disables BH for both cases fixing the deadlocks. Acked-by: Jesse Gross <jesse@nicira.com> ================================= [ INFO: inconsistent lock state ] 3.14.0-rc8-00007-g632b06a #1 Tainted: G I --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/0/0 [HC0[0]:SC1[5]:HE1:SE0] takes: (&(&cpu_stats->lock)->rlock){+.?...}, at: [<ffffffffa05dd8a1>] ovs_flow_stats_update+0x51/0xd0 [openvswitch] {SOFTIRQ-ON-W} state was registered at: [<ffffffff810f973f>] __lock_acquire+0x68f/0x1c40 [<ffffffff810fb4e2>] lock_acquire+0xa2/0x1d0 [<ffffffff817d8d9e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa05dd9e4>] ovs_flow_stats_get+0xc4/0x1e0 [openvswitch] [<ffffffffa05da855>] ovs_flow_cmd_fill_info+0x185/0x360 [openvswitch] [<ffffffffa05daf05>] ovs_flow_cmd_build_info.constprop.27+0x55/0x90 [openvswitch] [<ffffffffa05db41d>] ovs_flow_cmd_new_or_set+0x4dd/0x570 [openvswitch] [<ffffffff816c245d>] genl_family_rcv_msg+0x1cd/0x3f0 [<ffffffff816c270e>] genl_rcv_msg+0x8e/0xd0 [<ffffffff816c0239>] netlink_rcv_skb+0xa9/0xc0 [<ffffffff816c0798>] genl_rcv+0x28/0x40 [<ffffffff816bf830>] netlink_unicast+0x100/0x1e0 [<ffffffff816bfc57>] netlink_sendmsg+0x347/0x770 [<ffffffff81668e9c>] sock_sendmsg+0x9c/0xe0 [<ffffffff816692d9>] ___sys_sendmsg+0x3a9/0x3c0 [<ffffffff8166a911>] __sys_sendmsg+0x51/0x90 [<ffffffff8166a962>] SyS_sendmsg+0x12/0x20 [<ffffffff817e3ce9>] system_call_fastpath+0x16/0x1b irq event stamp: 1740726 hardirqs last enabled at (1740726): [<ffffffff8175d5e0>] ip6_finish_output2+0x4f0/0x840 hardirqs last disabled at (1740725): [<ffffffff8175d59b>] ip6_finish_output2+0x4ab/0x840 softirqs last enabled at (1740674): [<ffffffff8109be12>] _local_bh_enable+0x22/0x50 softirqs last disabled at (1740675): [<ffffffff8109db05>] irq_exit+0xc5/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&cpu_stats->lock)->rlock); <Interrupt> lock(&(&cpu_stats->lock)->rlock); *** DEADLOCK *** 5 locks held by swapper/0/0: #0: (((&ifa->dad_timer))){+.-...}, at: [<ffffffff810a7155>] call_timer_fn+0x5/0x320 #1: (rcu_read_lock){.+.+..}, at: [<ffffffff81788a55>] mld_sendpack+0x5/0x4a0 #2: (rcu_read_lock_bh){.+....}, at: [<ffffffff8175d149>] ip6_finish_output2+0x59/0x840 #3: (rcu_read_lock_bh){.+....}, at: [<ffffffff8168ba75>] __dev_queue_xmit+0x5/0x9b0 #4: (rcu_read_lock){.+.+..}, at: [<ffffffffa05e41b5>] internal_dev_xmit+0x5/0x110 [openvswitch] stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Tainted: G I 3.14.0-rc8-00007-g632b06a #1 Hardware name: /DX58SO, BIOS SOX5810J.86A.5599.2012.0529.2218 05/29/2012 0000000000000000 0fcf20709903df0c ffff88042d603808 ffffffff817cfe3c ffffffff81c134c0 ffff88042d603858 ffffffff817cb6da 0000000000000005 ffffffff00000001 ffff880400000000 0000000000000006 ffffffff81c134c0 Call Trace: <IRQ> [<ffffffff817cfe3c>] dump_stack+0x4d/0x66 [<ffffffff817cb6da>] print_usage_bug+0x1f4/0x205 [<ffffffff810f7f10>] ? check_usage_backwards+0x180/0x180 [<ffffffff810f8963>] mark_lock+0x223/0x2b0 [<ffffffff810f96d3>] __lock_acquire+0x623/0x1c40 [<ffffffff810f5707>] ? __lock_is_held+0x57/0x80 [<ffffffffa05e26c6>] ? masked_flow_lookup+0x236/0x250 [openvswitch] [<ffffffff810fb4e2>] lock_acquire+0xa2/0x1d0 [<ffffffffa05dd8a1>] ? ovs_flow_stats_update+0x51/0xd0 [openvswitch] [<ffffffff817d8d9e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa05dd8a1>] ? ovs_flow_stats_update+0x51/0xd0 [openvswitch] [<ffffffffa05dd8a1>] ovs_flow_stats_update+0x51/0xd0 [openvswitch] [<ffffffffa05dcc64>] ovs_dp_process_received_packet+0x84/0x120 [openvswitch] [<ffffffff810f93f7>] ? __lock_acquire+0x347/0x1c40 [<ffffffffa05e3bea>] ovs_vport_receive+0x2a/0x30 [openvswitch] [<ffffffffa05e4218>] internal_dev_xmit+0x68/0x110 [openvswitch] [<ffffffffa05e41b5>] ? internal_dev_xmit+0x5/0x110 [openvswitch] [<ffffffff8168b4a6>] dev_hard_start_xmit+0x2e6/0x8b0 [<ffffffff8168be87>] __dev_queue_xmit+0x417/0x9b0 [<ffffffff8168ba75>] ? __dev_queue_xmit+0x5/0x9b0 [<ffffffff8175d5e0>] ? ip6_finish_output2+0x4f0/0x840 [<ffffffff8168c430>] dev_queue_xmit+0x10/0x20 [<ffffffff8175d641>] ip6_finish_output2+0x551/0x840 [<ffffffff8176128a>] ? ip6_finish_output+0x9a/0x220 [<ffffffff8176128a>] ip6_finish_output+0x9a/0x220 [<ffffffff8176145f>] ip6_output+0x4f/0x1f0 [<ffffffff81788c29>] mld_sendpack+0x1d9/0x4a0 [<ffffffff817895b8>] mld_send_initial_cr.part.32+0x88/0xa0 [<ffffffff817691b0>] ? addrconf_dad_completed+0x220/0x220 [<ffffffff8178e301>] ipv6_mc_dad_complete+0x31/0x50 [<ffffffff817690d7>] addrconf_dad_completed+0x147/0x220 [<ffffffff817691b0>] ? addrconf_dad_completed+0x220/0x220 [<ffffffff8176934f>] addrconf_dad_timer+0x19f/0x1c0 [<ffffffff810a71e9>] call_timer_fn+0x99/0x320 [<ffffffff810a7155>] ? call_timer_fn+0x5/0x320 [<ffffffff817691b0>] ? addrconf_dad_completed+0x220/0x220 [<ffffffff810a76c4>] run_timer_softirq+0x254/0x3b0 [<ffffffff8109d47d>] __do_softirq+0x12d/0x480 Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-27core, nfqueue, openvswitch: Orphan frags in skb_zerocopy and handle errorsZoltan Kiss1-1/+5
skb_zerocopy can copy elements of the frags array between skbs, but it doesn't orphan them. Also, it doesn't handle errors, so this patch takes care of that as well, and modify the callers accordingly. skb_tx_error() is also added to the callers so they will signal the failed delivery towards the creator of the skb. Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-5/+7
Conflicts: Documentation/devicetree/bindings/net/micrel-ks8851.txt net/core/netpoll.c The net/core/netpoll.c conflict is a bug fix in 'net' happening to code which is completely removed in 'net-next'. In micrel-ks8851.txt we simply have overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20openvswitch: Correctly report flow used times for first 5 minutes after boot.Ben Pfaff1-1/+1
The kernel starts out its "jiffies" timer as 5 minutes below zero, as shown in include/linux/jiffies.h: /* * Have the 32 bit jiffies value wrap 5 minutes after boot * so jiffies wrap bugs show up earlier. */ #define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ)) The loop in ovs_flow_stats_get() starts out with 'used' set to 0, then takes any "later" time. This means that for the first five minutes after boot, flows will always be reported as never used, since 0 is greater than any time already seen. Signed-off-by: Ben Pfaff <blp@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-03-15net: Replace u64_stats_fetch_begin_bh to u64_stats_fetch_begin_irqEric W. Biederman2-4/+4
Replace the bh safe variant with the hard irq safe variant. We need a hard irq safe variant to deal with netpoll transmitting packets from hard irq context, and we need it in most if not all of the places using the bh safe variant. Except on 32bit uni-processor the code is exactly the same so don't bother with a bh variant, just have a hard irq safe variant that everyone can use. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16openvswitch: Fix race.Jarno Rajahalme1-3/+4
ovs_vport_cmd_dump() did rcu_read_lock() only after getting the datapath, which could have been deleted in between. Resolved by taking rcu_read_lock() before the get_dp() call. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-02-16openvswitch: Read tcp flags only then the tranport header is present.Jarno Rajahalme1-0/+1
Only the first IP fragment can have a TCP header, check for this. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-02-16ovs: fix dp check in ovs_dp_reset_user_featuresJiri Pirko1-1/+1
This fixes crash when userspace does "ovs-dpctl add-dp dev" where dev is existing non-dp netdevice. Introduced by: commit 44da5ae5fbea4686f667dc854e5ea16814e44c59 "openvswitch: Drop user features if old user space attempted to create datapath" Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-02-15openvswitch: rename ->sync to ->syncpWANG Cong2-7/+7
Openvswitch defines u64_stats_sync as ->sync rather than ->syncp, so fails to compile with netdev_alloc_pcpu_stats(). So just rename it to ->syncp. Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: 1c213bd24ad04f4430031 (net: introduce netdev_alloc_pcpu_stats() for drivers) Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-15net: introduce netdev_alloc_pcpu_stats() for driversWANG Cong2-16/+2
There are many drivers calling alloc_percpu() to allocate pcpu stats and then initializing ->syncp. So just introduce a helper function for them. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-05openvswitch: Suppress error messages on megaflow updatesAndy Zhou1-4/+1
With subfacets, we'd expect megaflow updates message to carry the original micro flow. If not, EINVAL is returned and kernel logs an error message. Now that the user space subfacet layer is removed, it is expected that flow updates can arrive with a micro flow other than the original. Change the return code to EEXIST and remove the kernel error log message. Reported-by: Ben Pfaff <blp@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-02-05openvswitch: Fix ovs_flow_free() ovs-lock assert.Pravin B Shelar1-2/+4
ovs_flow_free() is not called under ovs-lock during packet execute path (ovs_packet_cmd_execute()). Since packet execute does not touch flow->mask, there is no need to take that lock either. So move assert in case where flow->mask is checked. Found by code inspection. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-02-05openvswitch: Fix ovs_dp_cmd_msg_size()Daniele Di Proietto1-0/+1
commit 43d4be9cb55f3bac5253e9289996fd9d735531db (openvswitch: Allow user space to announce ability to accept unaligned Netlink messages) introduced OVS_DP_ATTR_USER_FEATURES netlink attribute in datapath responses, but the attribute size was not taken into account in ovs_dp_cmd_msg_size(). Signed-off-by: Daniele Di Proietto <daniele.di.proietto@gmail.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-02-05openvswitch: Fix kernel panic on ovs_flow_freeAndy Zhou3-48/+47
Both mega flow mask's reference counter and per flow table mask list should only be accessed when holding ovs_mutex() lock. However this is not true with ovs_flow_table_flush(). The patch fixes this bug. Reported-by: Joe Stringer <joestringer@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-02-05openvswitch: Pad OVS_PACKET_ATTR_PACKET if linear copy was performedThomas Graf1-0/+8
While the zerocopy method is correctly omitted if user space does not support unaligned Netlink messages. The attribute is still not padded correctly as skb_zerocopy() will not ensure padding and the attribute size is no longer pre calculated though nla_reserve() which ensured padding previously. This patch applies appropriate padding if a linear data copy was performed in skb_zerocopy(). Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Zoltan Kiss <zoltan.kiss@citrix.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-01-15net: replace macros net_random and net_srandom with direct calls to prandomAruna-Hewapathirane1-1/+1
This patch removes the net_random and net_srandom macros and replaces them with direct calls to the prandom ones. As new commits only seem to use prandom_u32 there is no use to keep them around. This change makes it easier to grep for users of prandom_u32. Signed-off-by: Aruna-Hewapathirane <aruna.hewapathirane@gmail.com> Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-09openvswitch: Use kmem_cache_free() instead of kfree()Wei Yongjun1-1/+1
memory allocated by kmem_cache_alloc() should be freed using kmem_cache_free(), not kfree(). Fixes: e298e5057006 ('openvswitch: Per cpu flow stats.') Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-07Merge branch 'master' of ↵David S. Miller10-157/+349
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch Jesse Gross says: ==================== [GIT net-next] Open vSwitch Open vSwitch changes for net-next/3.14. Highlights are: * Performance improvements in the mechanism to get packets to userspace using memory mapped netlink and skb zero copy where appropriate. * Per-cpu flow stats in situations where flows are likely to be shared across CPUs. Standard flow stats are used in other situations to save memory and allocation time. * A handful of code cleanups and rationalization. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-07ovs: make functions localStephen Hemminger4-6/+7
Several functions and datastructures could be local Found with 'make namespacecheck' Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Jesse Gross <jesse@nicira.com>