summaryrefslogtreecommitdiff
path: root/net/nfc
AgeCommit message (Collapse)AuthorFilesLines
2021-04-26Merge tag 'tty-5.13-rc1' of ↵Linus Torvalds1-81/+67
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial driver updates from Greg KH: "Here is the big set of tty and serial driver updates for 5.13-rc1. Actually busy this release, with a number of cleanups happening: - much needed core tty cleanups by Jiri Slaby - removal of unused and orphaned old-style serial drivers. If anyone shows up with this hardware, it is trivial to restore these but we really do not think they are in use anymore. - fixes and cleanups from Johan Hovold on a number of termios setting corner cases that loads of drivers got wrong as well as removing unneeded code due to tty core changes from long ago that were never propagated out to the drivers - loads of platform-specific serial port driver updates and fixes - coding style cleanups and other small fixes and updates all over the tty/serial tree. All of these have been in linux-next for a while now with no reported issues" * tag 'tty-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits) serial: extend compile-test coverage serial: stm32: add FIFO threshold configuration dt-bindings: serial: 8250: update TX FIFO trigger level dt-bindings: serial: stm32: override FIFO threshold properties dt-bindings: serial: add RX and TX FIFO properties serial: xilinx_uartps: drop low-latency workaround serial: vt8500: drop low-latency workaround serial: timbuart: drop low-latency workaround serial: sunsu: drop low-latency workaround serial: sifive: drop low-latency workaround serial: txx9: drop low-latency workaround serial: sa1100: drop low-latency workaround serial: rp2: drop low-latency workaround serial: rda: drop low-latency workaround serial: owl: drop low-latency workaround serial: msm_serial: drop low-latency workaround serial: mpc52xx_uart: drop low-latency workaround serial: meson: drop low-latency workaround serial: mcf: drop low-latency workaround serial: lpc32xx_hs: drop low-latency workaround ...
2021-03-26nfc: Avoid endless loops caused by repeated llcp_sock_connect()Xiaoming Ni1-0/+4
When sock_wait_state() returns -EINPROGRESS, "sk->sk_state" is LLCP_CONNECTING. In this case, llcp_sock_connect() is repeatedly invoked, nfc_llcp_sock_link() will add sk to local->connecting_sockets twice. sk->sk_node->next will point to itself, that will make an endless loop and hang-up the system. To fix it, check whether sk->sk_state is LLCP_CONNECTING in llcp_sock_connect() to avoid repeated invoking. Fixes: b4011239a08e ("NFC: llcp: Fix non blocking sockets connections") Reported-by: "kiyin(尹亮)" <kiyin@tencent.com> Link: https://www.openwall.com/lists/oss-security/2020/11/01/1 Cc: <stable@vger.kernel.org> #v3.11 Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-26nfc: fix memory leak in llcp_sock_connect()Xiaoming Ni1-0/+2
In llcp_sock_connect(), use kmemdup to allocate memory for "llcp_sock->service_name". The memory is not released in the sock_unlink label of the subsequent failure branch. As a result, memory leakage occurs. fix CVE-2020-25672 Fixes: d646960f7986 ("NFC: Initial LLCP support") Reported-by: "kiyin(尹亮)" <kiyin@tencent.com> Link: https://www.openwall.com/lists/oss-security/2020/11/01/1 Cc: <stable@vger.kernel.org> #v3.3 Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-26nfc: fix refcount leak in llcp_sock_connect()Xiaoming Ni1-0/+2
nfc_llcp_local_get() is invoked in llcp_sock_connect(), but nfc_llcp_local_put() is not invoked in subsequent failure branches. As a result, refcount leakage occurs. To fix it, add calling nfc_llcp_local_put(). fix CVE-2020-25671 Fixes: c7aa12252f51 ("NFC: Take a reference on the LLCP local pointer when creating a socket") Reported-by: "kiyin(尹亮)" <kiyin@tencent.com> Link: https://www.openwall.com/lists/oss-security/2020/11/01/1 Cc: <stable@vger.kernel.org> #v3.6 Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-26nfc: fix refcount leak in llcp_sock_bind()Xiaoming Ni1-0/+2
nfc_llcp_local_get() is invoked in llcp_sock_bind(), but nfc_llcp_local_put() is not invoked in subsequent failure branches. As a result, refcount leakage occurs. To fix it, add calling nfc_llcp_local_put(). fix CVE-2020-25670 Fixes: c7aa12252f51 ("NFC: Take a reference on the LLCP local pointer when creating a socket") Reported-by: "kiyin(尹亮)" <kiyin@tencent.com> Link: https://www.openwall.com/lists/oss-security/2020/11/01/1 Cc: <stable@vger.kernel.org> #v3.6 Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-10net: nfc: nci: drop nci_uart_default_recvJiri Slaby1-10/+0
nci_uart_register returns -EINVAL immediately when nu->ops.recv is not set. So the same 'if' later never triggers so nci_uart_default_recv is never used. Drop it. Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210302062214.29627-17-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10net: nfc: nci: drop nci_uart_ops::recv_bufJiri Slaby1-69/+67
There is noone setting nci_uart_ops::recv_buf, so the default one (nci_uart_default_recv_buf) is always used. So drop this hook, move nci_uart_default_recv_buf before the use in nci_uart_tty_receive and remove unused parameter flags. Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210302062214.29627-16-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10net: nfc: nci: remove memset of nci_uart_driversJiri Slaby1-1/+0
nci_uart_drivers is a global definition, so there is no need to initialize its memory to zero during module load. Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210302062214.29627-15-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10tty: remove TTY_LDISC_MAGICJiri Slaby1-1/+0
First, it is never checked. Second, use of it as a debugging aid is at least questionable. With the current tools, I don't think anyone used this kind of thing for debugging purposes for years. On the top of that, e.g. serdev does not set this field of tty_ldisc_ops at all. So get rid of this legacy. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210302062214.29627-8-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-21Merge tag 'tty-5.12-rc1' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of tty/serial driver changes for 5.12-rc1. Nothing huge, just lots of good cleanups and additions: - n_tty line discipline cleanups - vt core cleanups and reworks to make the code more "modern" - stm32 driver additions - tty led support added to the tty core and led layer - minor serial driver fixups and additions All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (54 commits) serial: core: Remove BUG_ON(in_interrupt()) check vt_ioctl: Remove in_interrupt() check dt-bindings: serial: imx: Switch to my personal address vt: keyboard, use new API for keyboard_tasklet serial: stm32: improve platform_get_irq condition handling in init_port serial: ifx6x60: Remove driver for deprecated platform tty: fix up iterate_tty_read() EOVERFLOW handling tty: fix up hung_up_tty_read() conversion tty: fix up hung_up_tty_write() conversion tty: teach the n_tty ICANON case about the new "cookie continuations" too tty: teach n_tty line discipline about the new "cookie continuations" tty: clean up legacy leftovers from n_tty line discipline tty: implement read_iter tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer serial: remove sirf prima/atlas driver serial: mxs-auart: Remove <asm/cacheflush.h> serial: mxs-auart: Remove serial_mxs_probe_dt() serial: fsl_lpuart: Use of_device_get_match_data() dt-bindings: serial: renesas,hscif: Add r8a779a0 support tty: serial: Drop unused efm32 serial driver ...
2021-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-1/+2
drivers/net/can/dev.c b552766c872f ("can: dev: prevent potential information leak in can_fill_info()") 3e77f70e7345 ("can: dev: move driver related infrastructure into separate subdir") 0a042c6ec991 ("can: dev: move netlink related code into seperate file") Code move. drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c 57ac4a31c483 ("net/mlx5e: Correctly handle changing the number of queues when the interface is down") 214baf22870c ("net/mlx5e: Support HTB offload") Adjacent code changes net/switchdev/switchdev.c 20776b465c0c ("net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP") ffb68fc58e96 ("net: switchdev: remove the transaction structure from port object notifiers") bae33f2b5afe ("net: switchdev: remove the transaction structure from port attributes") Transaction parameter gets dropped otherwise keep the fix. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28net: remove redundant 'depends on NET'Masahiro Yamada1-1/+0
These Kconfig files are included from net/Kconfig, inside the if NET ... endif. Remove 'depends on NET', which we know it is already met. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20210125232026.106855-1-masahiroy@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25Merge 5.11-rc5 into tty-nextGreg Kroah-Hartman1-1/+1
We need the fixes in here and this resolves a merge issue in drivers/tty/tty_io.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-24NFC: fix resource leak when target index is invalidPan Bian1-1/+1
Goto to the label put_dev instead of the label error to fix potential resource leak on path that the target index is invalid. Fixes: c4fbb6515a4d ("NFC: The core part should generate the target index") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210121152748.98409-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-24NFC: fix possible resource leakPan Bian1-0/+1
Put the device to avoid resource leak on path that the polling flag is invalid. Fixes: a831b9132065 ("NFC: Do not return EBUSY when stopping a poll that's already stopped") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210121153745.122184-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21Merge branch 'tty-splice' of ↵Greg Kroah-Hartman1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into tty-next Fixes both the "splice/sendfile to a tty" and "splice/sendfile from a tty" regression from 5.10. * 'tty-splice' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: tty: teach the n_tty ICANON case about the new "cookie continuations" too tty: teach n_tty line discipline about the new "cookie continuations" tty: clean up legacy leftovers from n_tty line discipline tty: implement read_iter tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer tty: implement write_iter
2021-01-21tty: convert tty_ldisc_ops 'read()' function to take a kernel pointerLinus Torvalds1-1/+2
The tty line discipline .read() function was passed the final user pointer destination as an argument, which doesn't match the 'write()' function, and makes it very inconvenient to do a splice method for ttys. This is a conversion to use a kernel buffer instead. NOTE! It does this by passing the tty line discipline ->read() function an additional "cookie" to fill in, and an offset into the cookie data. The line discipline can fill in the cookie data with its own private information, and then the reader will repeat the read until either the cookie is cleared or it runs out of data. The only real user of this is N_HDLC, which can use this to handle big packets, even if the kernel buffer is smaller than the whole packet. Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
Conflicts: drivers/net/can/dev.c commit 03f16c5075b2 ("can: dev: can_restart: fix use after free bug") commit 3e77f70e7345 ("can: dev: move driver related infrastructure into separate subdir") Code move. drivers/net/dsa/b53/b53_common.c commit 8e4052c32d6b ("net: dsa: b53: fix an off by one in checking "vlan->vid"") commit b7a9e0da2d1c ("net: switchdev: remove vid_begin -> vid_end range from VLAN objects") Field rename. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: nfc: nci: fix the wrong NCI_CORE_INIT parametersBongsu Jeon1-1/+1
Fix the code because NCI_CORE_INIT_CMD includes two parameters in NCI2.0 but there is no parameters in NCI1.x. Fixes: bcd684aace34 ("net/nfc/nci: Support NCI 2.x initial sequence") Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com> Link: https://lore.kernel.org/r/20210118205522.317087-1-bongsu.jeon@samsung.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-16nfc: netlink: use &w->w in nfc_genl_rcv_nl_eventGeliang Tang1-2/+2
Use the struct member w of the struct urelease_work directly instead of casting it. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Link: https://lore.kernel.org/r/f0ed86d6d54ac0834bd2e161d172bf7bb5647cf7.1610683862.git.geliangtang@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13hci: llc_shdlc: style: Simplify bool comparisonYANG LI1-1/+1
Fix the following coccicheck warning: ./net/nfc/hci/llc_shdlc.c:239:5-21: WARNING: Comparison to bool Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com> Reported-by: Abaci Robot<abaci@linux.alibaba.com> Link: https://lore.kernel.org/r/1610357063-57705-1-git-send-email-abaci-bugfix@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06net: nfc: nci: Change the NCI close sequenceBongsu Jeon1-2/+2
If there is a NCI command in work queue after closing the NCI device at nci_unregister_device, The NCI command timer starts at flush_workqueue function and then NCI command timeout handler would be called 5 second after flushing the NCI command work queue and destroying the queue. At that time, the timeout handler would try to use NCI command work queue that is destroyed already. it will causes the problem. To avoid this abnormal situation, change the sequence to prevent the NCI command timeout handler from being called after destroying the NCI command work queue. Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: sched: fix spelling mistake in Kconfig "trys" -> "tries"Colin Ian King1-1/+1
There is a spelling mistake in the Kconfig help text. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-05net/nfc/nci: Support NCI 2.x initial sequenceBongsu Jeon3-16/+104
implement the NCI 2.x initial sequence to support NCI 2.x NFCC. Since NCI 2.0, CORE_RESET and CORE_INIT sequence have been changed. If NFCEE supports NCI 2.x, then NCI 2.x initial sequence will work. In NCI 1.0, Initial sequence and payloads are as below: (DH) (NFCC) | -- CORE_RESET_CMD --> | | <-- CORE_RESET_RSP -- | | -- CORE_INIT_CMD --> | | <-- CORE_INIT_RSP -- | CORE_RESET_RSP payloads are Status, NCI version, Configuration Status. CORE_INIT_CMD payloads are empty. CORE_INIT_RSP payloads are Status, NFCC Features, Number of Supported RF Interfaces, Supported RF Interface, Max Logical Connections, Max Routing table Size, Max Control Packet Payload Size, Max Size for Large Parameters, Manufacturer ID, Manufacturer Specific Information. In NCI 2.0, Initial Sequence and Parameters are as below: (DH) (NFCC) | -- CORE_RESET_CMD --> | | <-- CORE_RESET_RSP -- | | <-- CORE_RESET_NTF -- | | -- CORE_INIT_CMD --> | | <-- CORE_INIT_RSP -- | CORE_RESET_RSP payloads are Status. CORE_RESET_NTF payloads are Reset Trigger, Configuration Status, NCI Version, Manufacturer ID, Manufacturer Specific Information Length, Manufacturer Specific Information. CORE_INIT_CMD payloads are Feature1, Feature2. CORE_INIT_RSP payloads are Status, NFCC Features, Max Logical Connections, Max Routing Table Size, Max Control Packet Payload Size, Max Data Packet Payload Size of the Static HCI Connection, Number of Credits of the Static HCI Connection, Max NFC-V RF Frame Size, Number of Supported RF Interfaces, Supported RF Interfaces. Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com> Link: https://lore.kernel.org/r/20201202223147.3472-1-bongsu.jeon@samsung.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16treewide: rename nla_strlcpy to nla_strscpy.Francis Laniel1-1/+1
Calls to nla_strlcpy are now replaced by calls to nla_strscpy which is the new name of this function. Signed-off-by: Francis Laniel <laniel_francis@privacyrequired.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-15nfc: refined function nci_hci_resp_receivedAlex Shi1-6/+3
We don't use the parameter result actually, so better to remove it and skip a gcc warning for unused variable. Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Link: https://lore.kernel.org/r/1605239517-49707-1-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-30net: nfc: Fix kerneldoc warningsAndrew Lunn3-1/+14
net//nfc/core.c:1046: warning: Function parameter or member 'tx_headroom' not described in 'nfc_allocate_device' net//nfc/core.c:1046: warning: Function parameter or member 'tx_tailroom' not described in 'nfc_allocate_device' net//nfc/core.c:198: warning: Excess function parameter 'protocols' description in 'nfc_start_poll' net//nfc/core.c:198: warning: Function parameter or member 'im_protocols' not described in 'nfc_start_poll' net//nfc/core.c:198: warning: Function parameter or member 'tm_protocols' not described in 'nfc_start_poll' net//nfc/core.c:441: warning: Function parameter or member 'mode' not described in 'nfc_deactivate_target' net//nfc/core.c:711: warning: Function parameter or member 'dev' not described in 'nfc_alloc_send_skb' net//nfc/core.c:711: warning: Function parameter or member 'err' not described in 'nfc_alloc_send_skb' net//nfc/core.c:711: warning: Function parameter or member 'flags' not described in 'nfc_alloc_send_skb' net//nfc/core.c:711: warning: Function parameter or member 'sk' not described in 'nfc_alloc_send_skb' net//nfc/digital_core.c:470: warning: Function parameter or member 'im_protocols' not described in 'digital_start_poll' net//nfc/digital_core.c:470: warning: Function parameter or member 'nfc_dev' not described in 'digital_start_poll' net//nfc/digital_core.c:470: warning: Function parameter or member 'tm_protocols' not described in 'digital_start_poll' net//nfc/nci/core.c:1119: warning: Function parameter or member 'tx_headroom' not described in 'nci_allocate_device' net//nfc/nci/core.c:1119: warning: Function parameter or member 'tx_tailroom' not described in 'nci_allocate_device' Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201028005653.930467-1-andrew@lunn.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-21nfc: Ensure presence of NFC_ATTR_FIRMWARE_NAME attribute in ↵Defang Bo1-1/+1
nfc_genl_fw_download() Check that the NFC_ATTR_FIRMWARE_NAME attributes are provided by the netlink client prior to accessing them.This prevents potential unhandled NULL pointer dereference exceptions which can be triggered by malicious user-mode programs, if they omit one or both of these attributes. Similar to commit a0323b979f81 ("nfc: Ensure presence of required attributes in the activate_target handler"). Fixes: 9674da8759df ("NFC: Add firmware upload netlink command") Signed-off-by: Defang Bo <bodefang@126.com> Link: https://lore.kernel.org/r/1603107538-4744-1-git-send-email-bodefang@126.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-06NFC: digital: Remove two unused macroesWang Hai1-3/+0
DIGITAL_NFC_DEP_REQ_RES_TAILROOM is never used after it was introduced. DIGITAL_NFC_DEP_REQ_RES_HEADROOM is no more used after below commit e8e7f4217564 ("NFC: digital: Remove useless call to skb_reserve()") Remove them. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-08-11net/nfc/rawsock.c: add CAP_NET_RAW check.Qingyu Li1-2/+5
When creating a raw AF_NFC socket, CAP_NET_RAW needs to be checked first. Signed-off-by: Qingyu Li <ieatmuttonchuan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+4
The UDP reuseport conflict was a little bit tricky. The net-next code, via bpf-next, extracted the reuseport handling into a helper so that the BPF sk lookup code could invoke it. At the same time, the logic for reuseport handling of unconnected sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace which changed the logic to carry on the reuseport result into the rest of the lookup loop if we do not return immediately. This requires moving the reuseport_has_conns() logic into the callers. While we are here, get rid of inline directives as they do not belong in foo.c files. The other changes were cases of more straightforward overlapping modifications. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-25net: pass a sockptr_t into ->setsockoptChristoph Hellwig1-3/+3
Rework the remaining setsockopt code to pass a sockptr_t instead of a plain user pointer. This removes the last remaining set_fs(KERNEL_DS) outside of architecture specific code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154] Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: make ->{get,set}sockopt in proto_ops optionalChristoph Hellwig2-6/+0
Just check for a NULL method instead of wiring up sock_no_{get,set}sockopt. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17nfc: nci: add missed destroy_workqueue in nci_register_deviceWang Hai1-1/+4
When nfc_register_device fails in nci_register_device, destroy_workqueue() shouled be called to destroy ndev->tx_wq. Fixes: 3c1c0f5dc80b ("NFC: NCI: Fix nci_register_device init sequence") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14net: nfc: kerneldoc fixesAndrew Lunn2-4/+3
Simple fixes which require no deep knowledge of the code. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-13treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-1/+1
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-3/+20
Minor overlapping changes, nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06net: nfc: fix bounds checking bugs on "pipe"Dan Carpenter1-3/+16
This is similar to commit 674d9de02aa7 ("NFC: Fix possible memory corruption when handling SHDLC I-Frame commands") and commit d7ee81ad09f0 ("NFC: nci: Add some bounds checking in nci_hci_cmd_received()") which added range checks on "pipe". The "pipe" variable comes skb->data[0] in nfc_hci_msg_rx_work(). It's in the 0-255 range. We're using it as the array index into the hdev->pipes[] array which has NFC_HCI_MAX_PIPES (128) members. Fixes: 118278f20aa8 ("NFC: hci: Add pipes table to reference them with a tuple {gate, host}") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04nfc: add missing attribute validation for vendor subcommandJakub Kicinski1-0/+2
Add missing attribute validation for vendor subcommand attributes to the netlink policy. Fixes: 9e58095f9660 ("NFC: netlink: Implement vendor command support") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04nfc: add missing attribute validation for deactivate targetJakub Kicinski1-0/+1
Add missing attribute validation for NFC_ATTR_TARGET_INDEX to the netlink policy. Fixes: 4d63adfe12dd ("NFC: Add NFC_CMD_DEACTIVATE_TARGET support") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04nfc: add missing attribute validation for SE APIJakub Kicinski1-0/+1
Add missing attribute validation for NFC_ATTR_SE_INDEX to the netlink policy. Fixes: 5ce3f32b5264 ("NFC: netlink: SE API implementation") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-18NFC: digital: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-2/+2
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: nfc: nci: fix a possible sleep-in-atomic-context bug in ↵Jia-Ju Bai1-1/+1
nci_uart_tty_receive() The kernel may sleep while holding a spinlock. The function call path (from bottom to top) in Linux 4.19 is: net/nfc/nci/uart.c, 349: nci_skb_alloc in nci_uart_default_recv_buf net/nfc/nci/uart.c, 255: (FUNC_PTR)nci_uart_default_recv_buf in nci_uart_tty_receive net/nfc/nci/uart.c, 254: spin_lock in nci_uart_tty_receive nci_skb_alloc(GFP_KERNEL) can sleep at runtime. (FUNC_PTR) means a function pointer is called. To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC for nci_skb_alloc(). This bug is found by a static analysis tool STCheck written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-05NFC: NCI: use new `delay` structure for SPI transfer delaysAlexandru Ardelean1-2/+4
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_secs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6485 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21net: Fix Kconfig indentation, continuedKrzysztof Kozlowski1-7/+7
Adjust indentation from spaces to tab (+optional two spaces) as in coding style. This fixes various indentation mixups (seven spaces, tab+one space, etc). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-2/+0
One conflict in the BPF samples Makefile, some fixes in 'net' whilst we were converting over to Makefile.target rules in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08nfc: netlink: fix double device reference dropPan Bian1-2/+0
The function nfc_put_device(dev) is called twice to drop the reference to dev when there is no associated local llcp. Remove one of them to fix the bug. Fixes: 52feb444a903 ("NFC: Extend netlink interface for LTO, RW, and MIUX parameters support") Fixes: d9b8d8e19b07 ("NFC: llcp: Service Name Lookup netlink interface") Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-2/+2
The only slightly tricky merge conflict was the netdevsim because the mutex locking fix overlapped a lot of driver reload reorganization. The rest were (relatively) trivial in nature. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: use skb_queue_empty_lockless() in poll() handlersEric Dumazet1-2/+2
Many poll() handlers are lockless. Using skb_queue_empty_lockless() instead of skb_queue_empty() is more appropriate. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-06net: nfc: have genetlink code to parse the attrs during dumpitJiri Pirko1-12/+5
Benefit from the fact that the generic netlink code can parse the attrs for dumpit op and avoid need to parse it in the op callback. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>