summaryrefslogtreecommitdiff
path: root/net/ncsi
AgeCommit message (Collapse)AuthorFilesLines
2024-10-03net/ncsi: Disable the ncsi work before freeing the associated structureEddie James1-0/+2
The work function can run after the ncsi device is freed, resulting in use-after-free bugs or kernel panic. Fixes: 2d283bdd079c ("net/ncsi: Resource management") Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://patch.msgid.link/20240925155523.1017097-1-eajames@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-02net/ncsi: Fix the multi thread manner of NCSI driverDelphineCCChiu3-38/+41
Currently NCSI driver will send several NCSI commands back to back without waiting the response of previous NCSI command or timeout in some state when NIC have multi channel. This operation against the single thread manner defined by NCSI SPEC(section 6.3.2.3 in DSP0222_1.1.1) According to NCSI SPEC(section 6.2.13.1 in DSP0222_1.1.1), we should probe one channel at a time by sending NCSI commands (Clear initial state, Get version ID, Get capabilities...), than repeat this steps until the max number of channels which we got from NCSI command (Get capabilities) has been probed. Fixes: e6f44ed6d04d ("net/ncsi: Package and channel management") Signed-off-by: DelphineCCChiu <delphine_cc_chiu@wiwynn.com> Link: https://lore.kernel.org/r/20240529065856.825241-1-delphine_cc_chiu@wiwynn.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-18net/ncsi: Add NC-SI 1.2 Get MC MAC Address commandPeter Delevoryas4-4/+59
This change adds support for the NC-SI 1.2 Get MC MAC Address command, specified here: https://www.dmtf.org/sites/default/files/standards/documents/DSP0222_1.2.0.pdf It serves the exact same function as the existing OEM Get MAC Address commands, so if a channel reports that it supports NC-SI 1.2, we prefer to use the standard command rather than the OEM command. Verified with an invalid MAC address and 2 valid ones: [ 55.137072] ftgmac100 1e690000.ftgmac eth0: NCSI: Received 3 provisioned MAC addresses [ 55.137614] ftgmac100 1e690000.ftgmac eth0: NCSI: MAC address 0: 00:00:00:00:00:00 [ 55.138026] ftgmac100 1e690000.ftgmac eth0: NCSI: MAC address 1: fa:ce:b0:0c:20:22 [ 55.138528] ftgmac100 1e690000.ftgmac eth0: NCSI: MAC address 2: fa:ce:b0:0c:20:23 [ 55.139241] ftgmac100 1e690000.ftgmac eth0: NCSI: Unable to assign 00:00:00:00:00:00 to device [ 55.140098] ftgmac100 1e690000.ftgmac eth0: NCSI: Set MAC address to fa:ce:b0:0c:20:22 Signed-off-by: Peter Delevoryas <peter@pjd.dev> Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-18net/ncsi: Fix netlink major/minor version numbersPeter Delevoryas4-8/+36
The netlink interface for major and minor version numbers doesn't actually return the major and minor version numbers. It reports a u32 that contains the (major, minor, update, alpha1) components as the major version number, and then alpha2 as the minor version number. For whatever reason, the u32 byte order was reversed (ntohl): maybe it was assumed that the encoded value was a single big-endian u32, and alpha2 was the minor version. The correct way to get the supported NC-SI version from the network controller is to parse the Get Version ID response as described in 8.4.44 of the NC-SI spec[1]. Get Version ID Response Packet Format Bits +--------+--------+--------+--------+ Bytes | 31..24 | 23..16 | 15..8 | 7..0 | +-------+--------+--------+--------+--------+ | 0..15 | NC-SI Header | +-------+--------+--------+--------+--------+ | 16..19| Response code | Reason code | +-------+--------+--------+--------+--------+ |20..23 | Major | Minor | Update | Alpha1 | +-------+--------+--------+--------+--------+ |24..27 | reserved | Alpha2 | +-------+--------+--------+--------+--------+ | .... other stuff .... | The major, minor, and update fields are all binary-coded decimal (BCD) encoded [2]. The spec provides examples below the Get Version ID response format in section 8.4.44.1, but for practical purposes, this is an example from a live network card: root@bmc:~# ncsi-util 0x15 NC-SI Command Response: cmd: GET_VERSION_ID(0x15) Response: COMMAND_COMPLETED(0x0000) Reason: NO_ERROR(0x0000) Payload length = 40 20: 0xf1 0xf1 0xf0 0x00 <<<<<<<<< (major, minor, update, alpha1) 24: 0x00 0x00 0x00 0x00 <<<<<<<<< (_, _, _, alpha2) 28: 0x6d 0x6c 0x78 0x30 32: 0x2e 0x31 0x00 0x00 36: 0x00 0x00 0x00 0x00 40: 0x16 0x1d 0x07 0xd2 44: 0x10 0x1d 0x15 0xb3 48: 0x00 0x17 0x15 0xb3 52: 0x00 0x00 0x81 0x19 This should be parsed as "1.1.0". "f" in the upper-nibble means to ignore it, contributing zero. If both nibbles are "f", I think the whole field is supposed to be ignored. Major and minor are "required", meaning they're not supposed to be "ff", but the update field is "optional" so I think it can be ff. I think the simplest thing to do is just set the major and minor to zero instead of juggling some conditional logic or something. bcd2bin() from "include/linux/bcd.h" seems to assume both nibbles are 0-9, so I've provided a custom BCD decoding function. Alpha1 and alpha2 are ISO/IEC 8859-1 encoded, which just means ASCII characters as far as I can tell, although the full encoding table for non-alphabetic characters is slightly different (I think). I imagine the alpha fields are just supposed to be alphabetic characters, but I haven't seen any network cards actually report a non-zero value for either. If people wrote software against this netlink behavior, and were parsing the major and minor versions themselves from the u32, then this would definitely break their code. [1] https://www.dmtf.org/sites/default/files/standards/documents/DSP0222_1.0.0.pdf [2] https://en.wikipedia.org/wiki/Binary-coded_decimal [2] https://en.wikipedia.org/wiki/ISO/IEC_8859-1 Signed-off-by: Peter Delevoryas <peter@pjd.dev> Fixes: 138635cc27c9 ("net/ncsi: NCSI response packet handler") Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-18net/ncsi: Simplify Kconfig/dts control flowPeter Delevoryas1-17/+3
Background: 1. CONFIG_NCSI_OEM_CMD_KEEP_PHY If this is enabled, we send an extra OEM Intel command in the probe sequence immediately after discovering a channel (e.g. after "Clear Initial State"). 2. CONFIG_NCSI_OEM_CMD_GET_MAC If this is enabled, we send one of 3 OEM "Get MAC Address" commands from Broadcom, Mellanox (Nvidida), and Intel in the *configuration* sequence for a channel. 3. mellanox,multi-host (or mlx,multi-host) Introduced by this patch: https://lore.kernel.org/all/20200108234341.2590674-1-vijaykhemka@fb.com/ Which was actually originally from cosmo.chou@quantatw.com: https://github.com/facebook/openbmc-linux/commit/9f132a10ec48db84613519258cd8a317fb9c8f1b Cosmo claimed that the Nvidia ConnectX-4 and ConnectX-6 NIC's don't respond to Get Version ID, et. al in the probe sequence unless you send the Set MC Affinity command first. Problem Statement: We've been using a combination of #ifdef code blocks and IS_ENABLED() conditions to conditionally send these OEM commands. It makes adding any new code around these commands hard to understand. Solution: In this patch, I just want to remove the conditionally compiled blocks of code, and always use IS_ENABLED(...) to do dynamic control flow. I don't think the small amount of code this adds to non-users of the OEM Kconfigs is a big deal. Signed-off-by: Peter Delevoryas <peter@pjd.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-15Revert ncsi: Propagate carrier gain/loss events to the NCSI controllerJohnathan Mantey1-5/+0
This reverts commit 3780bb29311eccb7a1c9641032a112eed237f7e3. The cited commit introduced unwanted behavior. The intent for the commit was to be able to detect carrier loss/gain for just the NIC connected to the BMC. The unwanted effect is a carrier loss for auxiliary paths also causes the BMC to lose carrier. The BMC never regains carrier despite the secondary NIC regaining a link. This change, when merged, needs to be backported to stable kernels. 5.4-stable, 5.10-stable, 5.15-stable, 6.1-stable, 6.5-stable Fixes: 3780bb29311e ("ncsi: Propagate carrier gain/loss events to the NCSI controller") CC: stable@vger.kernel.org Signed-off-by: Johnathan Mantey <johnathanx.mantey@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-18ncsi: Propagate carrier gain/loss events to the NCSI controllerJohnathan Mantey1-0/+5
Report the carrier/no-carrier state for the network interface shared between the BMC and the passthrough channel. Without this functionality the BMC is unable to reconfigure the NIC in the event of a re-cabling to a different subnet. Signed-off-by: Johnathan Mantey <johnathanx.mantey@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16genetlink: make genl_info->nlhdr constJakub Kicinski2-2/+2
struct netlink_callback has a const nlh pointer, make the pointer in struct genl_info const as well, to make copying between the two easier. Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230814214723.2924989-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-09net/ncsi: change from ndo_set_mac_address to dev_set_mac_addressIvan Mikhaylov1-2/+3
Change ndo_set_mac_address to dev_set_mac_address because dev_set_mac_address provides a way to notify network layer about MAC change. In other case, services may not aware about MAC change and keep using old one which set from network adapter driver. As example, DHCP client from systemd do not update MAC address without notification from net subsystem which leads to the problem with acquiring the right address from DHCP server. Fixes: cb10c7c0dfd9e ("net/ncsi: Add NCSI Broadcom OEM command") Cc: stable@vger.kernel.org # v6.0+ 2f38e84 net/ncsi: make one oem_gma function for all mfr id Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-09net/ncsi: make one oem_gma function for all mfr idIvan Mikhaylov1-69/+19
Make the one Get Mac Address function for all manufacturers and change this call in handlers accordingly. Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-28net/ncsi: clear Tx enable mode when handling a Config required AENCosmo Chou1-0/+1
ncsi_channel_is_tx() determines whether a given channel should be used for Tx or not. However, when reconfiguring the channel by handling a Configuration Required AEN, there is a misjudgment that the channel Tx has already been enabled, which results in the Enable Channel Network Tx command not being sent. Clear the channel Tx enable flag before reconfiguring the channel to avoid the misjudgment. Fixes: 8d951a75d022 ("net/ncsi: Configure multi-package, multi-channel modes with failover") Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-16net: Use of_property_read_bool() for boolean propertiesRob Herring1-2/+2
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to of_property_read_bool(). Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for net/can Acked-by: Kalle Valo <kvalo@kernel.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-07net/ncsi: Silence runtime memcpy() false positive warningKees Cook1-1/+2
The memcpy() in ncsi_cmd_handler_oem deserializes nca->data into a flexible array structure that overlapping with non-flex-array members (mfr_id) intentionally. Since the mem_to_flex() API is not finished, temporarily silence this warning, since it is a false positive, using unsafe_memcpy(). Reported-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/netdev/CACPK8Xdfi=OJKP0x0D1w87fQeFZ4A2DP2qzGCRcuVbpU-9=4sQ@mail.gmail.com/ Cc: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20221202212418.never.837-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-29genetlink: start to validate reserved header bytesJakub Kicinski1-0/+1
We had historically not checked that genlmsghdr.reserved is 0 on input which prevents us from using those precious bytes in the future. One use case would be to extend the cmd field, which is currently just 8 bits wide and 256 is not a lot of commands for some core families. To make sure that new families do the right thing by default put the onus of opting out of validation on existing families. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Paul Moore <paul@paul-moore.com> (NetLabel) Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-24net/ncsi: use proper "mellanox" DT vendor prefixKrzysztof Kozlowski1-1/+2
"mlx" Devicetree vendor prefix is not documented and instead "mellanox" should be used. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220622115416.7400-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-15all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriateYury Norov1-2/+2
find_first{,_zero}_bit is a more effective analogue of 'next' version if start == 0. This patch replaces 'next' with 'first' where things look trivial. Signed-off-by: Yury Norov <yury.norov@gmail.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2021-12-30net/ncsi: check for error return from call to nla_put_u32Jiasheng Jiang1-1/+5
As we can see from the comment of the nla_put() that it could return -EMSGSIZE if the tailroom of the skb is insufficient. Therefore, it should be better to check the return value of the nla_put_u32 and return the error code if error accurs. Also, there are many other functions have the same problem, and if this patch is correct, I will commit a new version to fix all. Fixes: 955dc68cb9b2 ("net/ncsi: Add generic netlink family") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20211229032118.1706294-1-jiasheng@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-24net/ncsi : Add payload to be 32-bit aligned to fix dropped packetsKumar Thangavel1-8/+16
Update NC-SI command handler (both standard and OEM) to take into account of payload paddings in allocating skb (in case of payload size is not 32-bit aligned). The checksum field follows payload field, without taking payload padding into account can cause checksum being truncated, leading to dropped packets. Fixes: fb4ee67529ff ("net/ncsi: Add NCSI OEM command support") Signed-off-by: Kumar Thangavel <thangavel.k@hcl.com> Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-02net/ncsi: add get MAC address command to get Intel i210 MAC addressIvan Mikhaylov4-1/+75
This patch adds OEM Intel GMA command and response handler for it. Signed-off-by: Brad Ho <Brad_Ho@phoenix.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> Link: https://lore.kernel.org/r/20210830171806.119857-2-i.mikhaylov@yadro.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-09net/ncsi: add dummy response handler for Intel boardsIvan Mikhaylov1-1/+8
Add the dummy response handler for Intel boards to prevent incorrect handling of OEM commands. Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-09net/ncsi: add NCSI Intel OEM command to keep PHY upIvan Mikhaylov3-0/+56
This allows to keep PHY link up and prevents any channel resets during the host load. It is KEEP_PHY_LINK_UP option(Veto bit) in i210 datasheet which block PHY reset and power state changes. Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-09net/ncsi: fix restricted cast warning of sparseIvan Mikhaylov2-4/+4
Sparse reports: net/ncsi/ncsi-rsp.c:406:24: warning: cast to restricted __be32 net/ncsi/ncsi-manage.c:732:33: warning: cast to restricted __be32 net/ncsi/ncsi-manage.c:756:25: warning: cast to restricted __be32 net/ncsi/ncsi-manage.c:779:25: warning: cast to restricted __be32 Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08net/ncsi: Fix spelling mistakesZheng Yongjun2-3/+3
Fix some spelling mistakes in comments: constuct ==> construct chanels ==> channels Detination ==> Destination Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-7/+13
Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-03-30net/ncsi: Avoid channel_monitor hrtimer deadlockMilton Miller1-7/+13
Calling ncsi_stop_channel_monitor from channel_monitor is a guaranteed deadlock on SMP because stop calls del_timer_sync on the timer that invoked channel_monitor as its timer function. Recognise the inherent race of marking the monitor disabled before deleting the timer by just returning if enable was cleared. After a timeout (the default case -- reset to START when response received) just mark the monitor.enabled false. If the channel has an entry on the channel_queue list, or if the state is not ACTIVE or INACTIVE, then warn and mark the timer stopped and don't restart, as the locking is broken somehow. Fixes: 0795fb2021f0 ("net/ncsi: Stop monitor if channel times out or is inactive") Signed-off-by: Milton Miller <miltonm@us.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29ncsi: internal.h: Fix a spelloBhaskar Chowdhury1-1/+1
s/Firware/Firmware/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-23net/ncsi: Use real net-device for response handlerJohn Wang1-1/+1
When aggregating ncsi interfaces and dedicated interfaces to bond interfaces, the ncsi response handler will use the wrong net device to find ncsi_dev, so that the ncsi interface will not work properly. Here, we use the original net device to fix it. Fixes: 138635cc27c9 ("net/ncsi: NCSI response packet handler") Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com> Link: https://lore.kernel.org/r/20201223055523.2069-1-wangzhiqiang.bj@bytedance.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-13net/ncsi: Fix netlink registrationJoel Stanley3-27/+3
If a user unbinds and re-binds a NC-SI aware driver the kernel will attempt to register the netlink interface at runtime. The structure is marked __ro_after_init so registration fails spectacularly at this point. # echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/unbind # echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/bind ftgmac100 1e660000.ethernet: Read MAC address 52:54:00:12:34:56 from chip ftgmac100 1e660000.ethernet: Using NCSI interface 8<--- cut here --- Unable to handle kernel paging request at virtual address 80a8f858 pgd = 8c768dd6 [80a8f858] *pgd=80a0841e(bad) Internal error: Oops: 80d [#1] SMP ARM CPU: 0 PID: 116 Comm: sh Not tainted 5.10.0-rc3-next-20201111-00003-gdd25b227ec1e #51 Hardware name: Generic DT based system PC is at genl_register_family+0x1f8/0x6d4 LR is at 0xff26ffff pc : [<8073f930>] lr : [<ff26ffff>] psr: 20000153 sp : 8553bc80 ip : 81406244 fp : 8553bd04 r10: 8085d12c r9 : 80a8f73c r8 : 85739000 r7 : 00000017 r6 : 80a8f860 r5 : 80c8ab98 r4 : 80a8f858 r3 : 00000000 r2 : 00000000 r1 : 81406130 r0 : 00000017 Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none Control: 00c5387d Table: 85524008 DAC: 00000051 Process sh (pid: 116, stack limit = 0x1f1988d6) ... Backtrace: [<8073f738>] (genl_register_family) from [<80860ac0>] (ncsi_init_netlink+0x20/0x48) r10:8085d12c r9:80c8fb0c r8:85739000 r7:00000000 r6:81218000 r5:85739000 r4:8121c000 [<80860aa0>] (ncsi_init_netlink) from [<8085d740>] (ncsi_register_dev+0x1b0/0x210) r5:8121c400 r4:8121c000 [<8085d590>] (ncsi_register_dev) from [<805a8060>] (ftgmac100_probe+0x6e0/0x778) r10:00000004 r9:80950228 r8:8115bc10 r7:8115ab00 r6:9eae2c24 r5:813b6f88 r4:85739000 [<805a7980>] (ftgmac100_probe) from [<805355ec>] (platform_drv_probe+0x58/0xa8) r9:80c76bb0 r8:00000000 r7:80cd4974 r6:80c76bb0 r5:8115bc10 r4:00000000 [<80535594>] (platform_drv_probe) from [<80532d58>] (really_probe+0x204/0x514) r7:80cd4974 r6:00000000 r5:80cd4868 r4:8115bc10 Jakub pointed out that ncsi_register_dev is obviously broken, because there is only one family so it would never work if there was more than one ncsi netdev. Fix the crash by registering the netlink family once on boot, and drop the code to unregister it. Fixes: 955dc68cb9b2 ("net/ncsi: Add generic netlink family") Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Link: https://lore.kernel.org/r/20201112061210.914621-1-joel@jms.id.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-03genetlink: move to smaller ops wherever possibleJakub Kicinski1-3/+3
Bulk of the genetlink users can use smaller ops, move them. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-23net/ncsi: use eth_zero_addr() to clear mac addressMiaohe Lin1-1/+1
Use eth_zero_addr() to clear mac address insetad of memset(). Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-13treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-2/+2
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-10net/ncsi: Support for multi host mellanox cardVijay Khemka2-0/+89
Multi host Mellanox cards require MAC affinity to be set before receiving any config commands. All config commands should also have unicast address for source address in command header. Adding GMA and SMAF(Set Mac Affinity) for Mellanox card and call these in channel probe state machine if it is defined in device tree. Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09net/ncsi: Send device address as source addressVijay Khemka1-1/+9
After receiving device mac address from device, send this as a source address for further commands instead of broadcast address. This will help in multi host NIC cards. Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-31net/ncsi: Fix gma flag setting after responseVijay Khemka2-3/+6
gma_flag was set at the time of GMA command request but it should only be set after getting successful response. Movinng this flag setting in GMA response handler. This flag is used mainly for not repeating GMA command once received MAC address. Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> Reviewed-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-20net/ncsi: Disable global multicast filterVijay Khemka2-93/+12
Disabling multicast filtering from NCSI if it is supported. As it should not filter any multicast packets. In current code, multicast filter is enabled and with an exception of optional field supported by device are disabled filtering. Mainly I see if goal is to disable filtering for IPV6 packets then let it disabled for every other types as well. As we are seeing issues with LLDP not working with this enabled filtering. And there are other issues with IPV6. By Disabling this multicast completely, it is working for both IPV6 as well as LLDP. Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-09-01net/ncsi: add response handlers for PLDM over NC-SIBen Wei2-2/+14
This patch adds handlers for PLDM over NC-SI command response. This enables NC-SI driver recognizes the packet type so the responses don't get dropped as unknown packet type. PLDM over NC-SI are not handled in kernel driver for now, but can be passed back to user space via Netlink for further handling. Signed-off-by: Ben Wei <benwei@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-6/+16
Minor conflict in r8169, bug fix had two versions in net and net-next, take the net-next hunks. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-23net/ncsi: update response packet length for GCPS/GNS/GNPTS commandsBen Wei1-3/+3
Update response packet length for the following commands per NC-SI spec - Get Controller Packet Statistics - Get NC-SI Statistics - Get NC-SI Pass-through Statistics command Signed-off-by: Ben Wei <benwei@fb.com> Reviewed-by: Justin Lee <justin.lee1@dell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-23net/ncsi: Fix the payload copying for the request coming from NetlinkJustin.Lee1@Dell.com1-2/+9
The request coming from Netlink should use the OEM generic handler. The standard command handler expects payload in bytes/words/dwords but the actual payload is stored in data if the request is coming from Netlink. Signed-off-by: Justin Lee <justin.lee1@dell.com> Reviewed-by: Vijay Khemka <vijaykhemka@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-20net/ncsi: Ensure 32-bit boundary for data cksumTerry S. Duncan2-4/+7
The NCSI spec indicates that if the data does not end on a 32 bit boundary, one to three padding bytes equal to 0x00 shall be present to align the checksum field to a 32-bit boundary. Signed-off-by: Terry S. Duncan <terry.s.duncan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner8-40/+8
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-28genetlink: optionally validate strictly/dumpsJohannes Berg1-0/+6
Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28netlink: make validation more configurable for future strictnessJohannes Berg1-2/+2
We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28netlink: make nla_nest_start() add NLA_F_NESTED flagMichal Kubecek1-6/+6
Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+5
Two easy cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24net/ncsi: handle overflow when incrementing mac addressTao Ren1-1/+5
Previously BMC's MAC address is calculated by simply adding 1 to the last byte of network controller's MAC address, and it produces incorrect result when network controller's MAC address ends with 0xFF. The problem can be fixed by calling eth_addr_inc() function to increment MAC address; besides, the MAC address is also validated before assigning to BMC. Fixes: cb10c7c0dfd9 ("net/ncsi: Add NCSI Broadcom OEM command") Signed-off-by: Tao Ren <taoren@fb.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-22genetlink: make policy common to familyJohannes Berg1-6/+1
Since maxattr is common, the policy can't really differ sanely, so make it common as well. The only user that did in fact manage to make a non-common policy is taskstats, which has to be really careful about it (since it's still using a common maxattr!). This is no longer supported, but we can fake it using pre_doit. This reduces the size of e.g. nl80211.o (which has lots of commands): text data bss dec hex filename 398745 14323 2240 415308 6564c net/wireless/nl80211.o (before) 397913 14331 2240 414484 65314 net/wireless/nl80211.o (after) -------------------------------- -832 +8 0 -824 Which is obviously just 8 bytes for each command, and an added 8 bytes for the new policy pointer. I'm not sure why the ops list is counted as .text though. Most of the code transformations were done using the following spatch: @ops@ identifier OPS; expression POLICY; @@ struct genl_ops OPS[] = { ..., { - .policy = POLICY, }, ... }; @@ identifier ops.OPS; expression ops.POLICY; identifier fam; expression M; @@ struct genl_family fam = { .ops = OPS, .maxattr = M, + .policy = POLICY, ... }; This also gets rid of devlink_nl_cmd_region_read_dumpit() accessing the cb->data as ops, which we want to change in a later genl patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-16net: ncsi: fix a missing check for nla_nest_startKangjie Lu1-0/+4
nla_nest_start may fail and thus deserves a check. The fix returns -EMSGSIZE in case it fails. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-21 23:58:55 +0300