summaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)AuthorFilesLines
2012-02-06Merge branch 'master' of ↵John W. Linville21-201/+367
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/rtlwifi/rtl8192se/sw.c
2012-02-02mac80211: timeout a single frame in the rx reorder bufferEliad Peller1-1/+1
The current code checks for stored_mpdu_num > 1, causing the reorder_timer to be triggered indefinitely, but the frame is never timed-out (until the next packet is received) Signed-off-by: Eliad Peller <eliad@wizery.com> Cc: <stable@vger.kernel.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-31mac80211: Move num_sta_ps counter decrement after synchronize_rcuHelmut Schaa1-9/+9
Unted the assumption that the sta struct is still accessible before the synchronize_rcu call we should move the num_sta_ps counter decrement after synchronize_rcu to avoid incorrect decrements if num_sta_ps. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-31mac80211: add support for mcs masksSimon Wunderlich6-9/+167
* Handle MCS masks set by the user. * Match rates provided by the rate control algorithm to the mask set, also in HT mode, and switch back to legacy mode if necessary. * add debugfs files to observate the rate selection Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-31mac80211: Fix incorrect num_sta_ps decrement in ap_sta_ps_endHelmut Schaa2-7/+5
If the driver blocked this specific STA with the help of ieee80211_sta_block_awake we won't clear WLAN_STA_PS_STA later but still decrement num_sta_ps. Hence, the next data frame from this STA will trigger ap_sta_ps_end again and also decrement num_sta_ps again leading to an incorrect num_sta_ps counter. This can result in problems with powersaving clients not waking up from PS because the TIM calculation might be skipped due to the incorrect num_sta_ps counter. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-31mac80211: Fix incorrect num_sta_ps decrement in __sta_info_destroyHelmut Schaa1-3/+1
When WLAN_STA_PS_DRIVER is set by ieee80211_sta_block_awake the num_sta_ps counter is not incremented. Hence, we shouldn't decrement it in __sta_info_destroy if only WLAN_STA_PS_DRIVER is set. This could result in an incorrect num_sta_ps counter leading to strange side effects with associated powersaving clients. Fix this by only decrementing num_sta_ps when WLAN_STA_PS_STA was set before. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-31mac80211: station state transition error handlingJohannes Berg8-39/+59
In the future, when we start notifying drivers, state transitions could potentially fail. To make it easier to distinguish between programming bugs and driver failures: * rename sta_info_move_state() to sta_info_pre_move_state() which can only be called before the station is inserted (and check this with a new station flag). * rename sta_info_move_state_checked() to just plain sta_info_move_state(), as it will be the regular function that can fail for more than just one reason (bad transition or an error from the driver) This makes the programming model easier -- one of the functions can only be called before insertion and can't fail, the other can fail. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-31Revert "mac80211: Do not scan for IBSS merge with a fixed BSSID."John W. Linville1-3/+2
This reverts commit f1e3be1561c43b6bbe2426e34849fb1486dc313b. Johannes Berg <johannes@sipsolutions.net> thinks that this patch is incorrect. I'll defer to his judgment. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-27mac80211: Do not scan for IBSS merge with a fixed BSSID.Nicolas Cavallari1-2/+3
Currently, when we are on an IBSS network with no active station, we would scan for other BSSID, even if fixed_bssid is on, due to a bug in ibss.c, where fixed_channel would be checked instead of fixed_bssid. This would trigger useless scans where scan results would not be used anyway. This patch also reverts commit 39d02a7d90602d4557ee05db2a157a4e0, which assumed that the ifibss->fixed_channel check was legitimate to disable single-channel scans. IBSS single-channel scan should now be fixed. Signed-off-by: Nicolas Cavallari <cavallar@lri.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-27mac80211: send null packet on active (psm) reconfigurationEliad Peller1-0/+15
The sta might be in psm against the ap (e.g. because this was the before a hw restart), so we explicitly send a null packet in order to make sure it'll sync against the ap (and get out of psm). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-27{nl,cfg,mac}80211: Add support of setting non-forwarding entity in MeshChun-Yeow Yeoh3-1/+4
A mesh node that joins the mesh network is by default a forwarding entity. This patch allows the mesh node to set as non-forwarding entity. Whenever dot11MeshForwarding is set to 0, the mesh node can prevent itself from forwarding the traffic which is not destined to him. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-27mac80211: fix a few -Wshadow warningsJohannes Berg2-6/+3
It seems that -Wshadow is no longer default in sparse runs, but let's fix the warnings anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-27mac80211: make CQM RSSI support per virtual interfaceJohannes Berg3-12/+4
Similar to the previous beacon filtering patch, make CQM RSSI support depend on the flags that the driver set for virtual interfaces. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-27mac80211: make beacon filtering per virtual interfaceJohannes Berg2-3/+1
Due to firmware limitations, we may not be able to support beacon filtering on all virtual interfaces. To allow this in mac80211, introduce per-interface driver capability flags that the driver sets when an interface is added. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24mac80211: set bss_conf.idle when vif is connectedEliad Peller1-0/+1
__ieee80211_recalc_idle() iterates through the vifs, sets bss_conf.idle = true if they are disconnected, and increases "count" if they are not (which later gets evaluated in order to determine whether the device is idle). However, the loop doesn't set bss_conf.idle = false (along with increasing "count"), causing the device idle state and the vif idle state to get out of sync in some cases. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24mac80211: update oper_channel on ibss joinEliad Peller1-0/+1
Commit 13c40c5 ("mac80211: Add HT operation modes for IBSS") broke ibss operation by mistakenly removing the local->oper_channel update (causing ibss to start on the wrong channel). fix it. Signed-off-by: Eliad Peller <eliad@wizery.com> Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24mac80211: in IBSS use the Auth frame to trigger STA reinsertionAntonio Quartulli1-36/+49
In case of a node re-joining the cell the sta_info structure belonging to it is first destroyed and then reinserted. In this way its internal state is reset. The joining operation is recognised thank the Auth frame being received. This operation is helpful in case of a node being rebooted that is joining the ad-hoc cell again, before its purge timeout on other nodes expires. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24mac80211: add a 2-way Authentication challenge to IBSS modeAntonio Quartulli1-0/+7
In IBSS mode, whenever a new station is added a 2-way authentication challenge is performed. Actually this event can be used to recognise a new station joining the cell even if its sta_info entry is already in the list. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24mac80211: clean up rate control codeJohannes Berg3-34/+7
It seems exceedingly unlikely that we'll ever support swapping rate control algorithms at runtime, so remove the unused refcounting code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24mac80211: clean up aggregation destructionJohannes Berg1-23/+8
Yogesh's patch to destroy aggregation sessions when stations are destroyed was needed, but unnecessarily complex. Clean up this code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24mac80211: remove useless DA checking in ieee80211_rx_mgmt_probe_resp()Antonio Quartulli1-3/+0
Actually the DA field has already been checked along the rx path (in prepare_for_handlers()) and this check is therefore useless at this point. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24mac80211: Fix the maximum transmit power with power constraintHong Wu2-2/+3
The local maximum transmit power for a channel is defined as the maximum regulatory transmission power minus the local power constraint specified for the channel in the Power Constraint element. (7.3.2.15 IEEE80211 2007) Signed-off-by: Hong Wu <hong.wu@dspg.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24mac80211: In IBSS the DA field of auth frames is different from BSSIDAntonio Quartulli4-7/+8
In case of authentication frame exchange between two IBSS STAs, the DA field must contain the destinatioin address (instead of the BSSID). Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24mac80211: refactor __ieee80211_get_channel_modeJohannes Berg1-11/+17
Use a switch statement instead of a list of if statements. Also include AP_VLAN in the list and skip them since the AP interface will also be looked at. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24mac80211: minor cleanupMohammed Shafi Shajakhan1-2/+1
we would have bailed out if 'ifibss->fixed_channel' is valid i.e. we had used 'fixed-freq' parameter in iw ibss join command. this is with the state 'IEEE80211_IBSS_MLME_JOINED' so no need to check for it Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24mac80211: check sta_apply_parameters() return valueEliad Peller1-1/+6
Bail out if sta_apply_parameters() returns an error. Signed-off-by: Eliad Peller <eliad@wizery.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-18mac80211: fix work removal on deauth requestJohannes Berg1-11/+27
When deauth is requested while an auth or assoc work item is in progress, we currently delete it without regard for any state it might need to clean up. Fix it by cleaning up for those items. In the case Pontus found, the problem manifested itself as such: authenticate with 00:23:69:aa:dd:7b (try 1) authenticated failed to insert Dummy STA entry for the AP (error -17) deauthenticating from 00:23:69:aa:dd:7b by local choice (reason=2) It could also happen differently if the driver uses the tx_sync callback. We can't just call the ->done() method of the work items because that will lock up due to the locking in cfg80211. This fix isn't very clean, but that seems acceptable since I have patches pending to remove this code completely. Cc: stable@vger.kernel.org Reported-by: Pontus Fuchs <pontus.fuchs@gmail.com> Tested-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-18mac80211: Use the right headroom size for mesh mgmt framesJavier Cardona2-6/+6
Use local->tx_headroom instad of local->hw.extra_tx_headroom. local->tx_headroom is the max of hw.extra_tx_headroom required by the driver and the headroom required by mac80211 for status reporting. On drivers where hw.extra_tx_headroom is smaller than what mac80211 requires (e.g. ath5k), we would not reserve sufficient buffer space to report tx status. Also, don't reserve local->tx_headroom + local->hw.extra_tx_headroom. Reported-by: Simon Morgenthaler <s.morgenthaler@students.unibe.ch> Reported-by: Kai Scharwies <kai@scharwies.de> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-18mac80211: fix debugfs key->station symlinkJohannes Berg1-3/+4
Since stations moved into a virtual interface subdirectory, this link has been broken. Fix it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17mac80211: Fix possible race between sta_unblock and network softirqHelmut Schaa1-2/+4
All other code paths in sta_unblock synchronize with the network softirq by using local_bh_disable/enable. Do the same around ieee80211_sta_ps_deliver_wakeup. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17mac80211: fix tx->skb NULL pointer dereferenceYoni Divinsky3-9/+22
In function ieee80211_tx_h_encrypt the var info was initialized from tx->skb, since the fucntion is called after the function ieee80211_tx_h_fragment tx->skb is not valid anymore. Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17Net, mac80211: Fix resource leak in ieee80211_rx_h_mesh_fwding()Jesper Juhl1-0/+1
We may leak the 'fwd_skb' we skb_copy() in ieee80211_rx_h_mesh_fwding() if we take the 'else' branch in the 'if' statement just below. If we take that branch we'll end up returning from the function and since we've not assigned 'fwd_skb' to anything at that point, we leak it when the variable goes out of scope. The simple fix seems to be to just kfree_skb(fwd_skb); just before we return. That is what this patch does. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-13mac80211: fix no-op authorized transitionsJohannes Berg1-1/+1
When userspace attempts to authorize a station that is already authorized, nothing happens as you'd expect. Similarly, when it unauthorizes a station that is associated, nothing happens. However, when it unauthorizes a station that isn't even associated yet, we erroneously try to move the station to associated. This seems to happen occasionally as a result of a race when wpa_supplicant attempts to unauthorize the port in managed mode. Particularly with my new patches to keep stations, it can then move a station into ASSOCIATED state before we have really associated, which is really confusing. I introduced this bug in "mac80211: refactor station state transitions" Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-13net: reintroduce missing rcu_assign_pointer() callsEric Dumazet4-7/+7
commit a9b3cd7f32 (rcu: convert uses of rcu_assign_pointer(x, NULL) to RCU_INIT_POINTER) did a lot of incorrect changes, since it did a complete conversion of rcu_assign_pointer(x, y) to RCU_INIT_POINTER(x, y). We miss needed barriers, even on x86, when y is not NULL. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-12mac80211: fix rx->key NULL pointer dereference in promiscuous modeStanislaw Gruszka1-1/+1
Since: commit 816c04fe7ef01dd9649f5ccfe796474db8708be5 Author: Christian Lamparter <chunkeey@googlemail.com> Date: Sat Apr 30 15:24:30 2011 +0200 mac80211: consolidate MIC failure report handling is possible to that we dereference rx->key == NULL when driver set RX_FLAG_MMIC_STRIPPED and not RX_FLAG_IV_STRIPPED and we are in promiscuous mode. This happen with rt73usb and rt61pci at least. Before the commit we always check rx->key against NULL, so I assume fix should be done in mac80211 (also mic_fail path has similar check). References: https://bugzilla.redhat.com/show_bug.cgi?id=769766 http://rt2x00.serialmonkey.com/pipermail/users_rt2x00.serialmonkey.com/2012-January/004395.html Cc: stable@vger.kernel.org # 3.0+ Reported-by: Stuart D Gathman <stuart@gathman.org> Reported-by: Kai Wohlfahrt <kai.scorpio@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-05Merge branch 'master' of ↵John W. Linville7-52/+19
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/b43legacy/dma.c
2012-01-04mac80211: remove dead codeMohammed Shafi Shajakhan2-19/+0
ieee80211_offchannel_enable_all_ps function is no longer used and looks like its logic is extensively handled in ieee80211_offchannel_stop_vifs Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04mac80211: Call driver commands after drv_start in mac80211 restart codeYogesh Ashok Powar1-10/+9
Ideally, hardware/firmware initialization is complete after the drv_start routine. In mac80211 restart code (ieee80211_reconfig), defer calling the driver commands i.e. setup fragmentation threshold, rts threshold and coverage class till drv_start routine is called. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> v2: Removed extra blank line added. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04mac80211: use RCU read locks for sta_info_getMohammed Shafi Shajakhan1-0/+2
this is being recently introduced by the commit a85e1d55974646a442d95911e3f7d7a891ea9ac5 Cc: Paul Stewart <pstew@google.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04mac80211: fix kernel panic in IBSS due to a regressionMohammed Shafi Shajakhan1-1/+4
kernel panic occurs when we create an IBSS mode and leave it for sometime without any joiner and this is introduced by the commit ec2b774e7c91094d8c00de579646f1162b87b01e where we don't put proper braces for 'list_for_each_entry_safe' and we pass an invalid 'sta' pointer to __sta_info_destroy EIP is at __list_add+0xe/0xa0 EAX: f3b63db4 EBX: 00000000 ECX: eab88c1c EDX: 00000000 ESI: 00000000 EDI: 00000246 EBP: f3b63d80 ESP: f3b63d58 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process kworker/u:2 (pid: 198, ti=f3b62000 task=f3afbea0 task.ti=f3b62000) Stack: 00000000 00000000 f9ef9821 00000000 00000000 eab88c30 f3b63d80 c017f623 eab88bf0 eab88bf0 f3b63dd0 c066f925 00000000 00000002 00000000 f9ef9821 f3b63da0 c0180a2b eab88c1c eab88c30 00000002 f3afbea0 eab88bf4 f3b63db4 Call Trace: [<f9ef9821>] ? __ieee80211_stop_tx_ba_session+0x31/0x60 [mac80211] [<c017f623>] ? debug_mutex_add_waiter+0x23/0x60 [<c066f925>] __mutex_lock_common+0xd5/0x390 [<f9ef9821>] ? __ieee80211_stop_tx_ba_session+0x31/0x60 [mac80211] [<c0180a2b>] ? trace_hardirqs_off+0xb/0x10 [<c066fd37>] mutex_lock_nested+0x47/0x60 [<f9ef9821>] ? __ieee80211_stop_tx_ba_session+0x31/0x60 [mac80211] [<f9ef9821>] __ieee80211_stop_tx_ba_session+0x31/0x60 [mac80211] [<f9ef8989>] ieee80211_sta_tear_down_BA_sessions+0x39/0x60 [mac80211] [<f9ef1a67>] __sta_info_destroy+0x57/0x780 [mac80211] [<f9ef2223>] ieee80211_sta_expire+0x93/0xb0 [mac80211] [<f9efc8f6>] ieee80211_ibss_work+0x2d6/0x530 [mac80211] Cc: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04mac80211: fix scan state machineMohammed Shafi Shajakhan1-1/+1
when we run high bandwidth UDP traffic and we trigger a scan, the scan state machine seems to be looping in SUSPEND->RESUME->DECISION->SUSPEND and SET_CHANNEL seems to be never called as 'tx_empty' is never true while running UDP traffic. fix this by settting SET_CHANNEL state when we get into RESUME state. Cc: Leela Kella <leela@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04mac80211: always clear SDATA_STATE_OFFCHANNEL flagEliad Peller1-1/+3
If the vif is stopped while it is offchannel (e.g. right after p2p negotiation) the SDATA_STATE_OFFCHANNEL flag is never get cleared, resulting in various bad effects (e.g. GO can't start beaconing). Fix it by clearing the SDATA_STATE_OFFCHANNEL flag even if the vif is stopped. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04mac80211: Remove superfluous ieee80211_rx_h_remove_qos_controlHelmut Schaa1-20/+0
This seems to not serve any purpose anymore, at least all frame processing afterwards seems to be able to deal with QoS frames. So, let's save the expensive memmove and just leave the QoS header in the 802.11 frame for further processing. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04Merge branch 'master' of ↵John W. Linville6-5/+111
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/b43/dma.c drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
2011-12-22mac80211: Keep skb->piority for relayed frames in AP modeHelmut Schaa1-1/+6
When mac80211 relays a frame from STA1 to STA2 in AP mode it will get re-classified in the tx path. Unfortunately the frame protocol field is always set to ETH_P_8023 while the classification only kicks in for ETH_P_IP. Hence, a high priority frame from STA1 will be send to STA2 as best effort. Instead of running classification on the frame just use the same priority as STA1 did. Do this by adding 256 to the skb->priority to allow cfg80211_classify8021d to shortcut frame classification. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-22mac80211: ibss should not purge clients it is not responsible forMarek Lindner1-0/+3
The IBSS merge code calls ieee80211_sta_expire() with a relatively short expire timeout that purges other clients prematurely. The expire function has to check that only the clients belonging to the vif in question are purged. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-20net: fix assignment of 0/1 to bool variables.Rusty Russell2-3/+3
DaveM said: Please, this kind of stuff rots forever and not using bool properly drives me crazy. Joe Perches <joe@perches.com> gave me the spatch script: @@ bool b; @@ -b = 0 +b = false @@ bool b; @@ -b = 1 +b = true I merely installed coccinelle, read the documentation and took credit. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-20mac80211: Fixing sparse warning at sta_info.cYogesh Ashok Powar1-2/+7
The commit 42624d4913a00219a8fdbb4bafd634d1d843be85 created following sparse warning >net/mac80211/sta_info.c:965:24: warning: incorrect type in assignment (different address spaces) >net/mac80211/sta_info.c:965:24: expected struct tid_ampdu_tx *tid_tx >net/mac80211/sta_info.c:965:24: got struct tid_ampdu_tx [noderef] <asn:4>*<noident> Making use of rcu_dereference_protected to fix the problem. V2: - Replacing rcu_dereference with rcu_dereference_protected as suggested by Johannes. - Adding mutex_lock/unlock to satisfy the condition at rcu_dereference_protected Cc: Nishant Sarmukadam <nishants@marvell.com> Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19mac80211: handle SMPS action framesJohannes Berg1-0/+58
When a peer changes SMPS state we should update rate control so it doesn't have to detect it by itself. It can't detect "dynamic" mode anyway since that just requires rts-cts handshaking. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19cfg80211: Return beacon loss count in stationPaul Stewart3-1/+13
If station info contains a beacon loss count, return it to userspace. Signed-off-by: Paul Stewart <pstew@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 11:38:55 +0300