summaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)AuthorFilesLines
2016-03-02Merge tag 'mac80211-for-davem-2016-03-02' of ↵David S. Miller3-11/+30
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Here are a few more fixes for the current cycle: * check GCMP encryption vs. fragmentation properly; we'd found this problem quite a while ago but waited for the 802.11 spec to be updated * fix RTS/CTS logic in minstrel_ht * fix RX of certain public action frames in AP mode * add mac80211_hwsim to MAC80211 in MAINTAINERS, this helps the kbuild robot pick up the right tree for it ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01mac80211: minstrel_ht: fix a logic error in RTS/CTS handlingFelix Fietkau1-1/+1
RTS/CTS needs to be enabled if the rate is a fallback rate *or* if it's a dual-stream rate and the sta is in dynamic SMPS mode. Cc: stable@vger.kernel.org Fixes: a3ebb4e1b763 ("mac80211: minstrel_ht: handle peers in dynamic SMPS") Reported-by: Matías Richart <mrichart@fing.edu.uy> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-03-01mac80211: Fix Public Action frame RX in AP modeJouni Malinen1-0/+1
Public Action frames use special rules for how the BSSID field (Address 3) is set. A wildcard BSSID is used in cases where the transmitter and recipient are not members of the same BSS. As such, we need to accept Public Action frames with wildcard BSSID. Commit db8e17324553 ("mac80211: ignore frames between TDLS peers when operating as AP") added a rule that drops Action frames to TDLS-peers based on an Action frame having different DA (Address 1) and BSSID (Address 3) values. This is not correct since it misses the possibility of BSSID being a wildcard BSSID in which case the Address 1 would not necessarily match. Fix this by allowing mac80211 to accept wildcard BSSID in an Action frame when in AP mode. Fixes: db8e17324553 ("mac80211: ignore frames between TDLS peers when operating as AP") Cc: stable@vger.kernel.org Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-03-01mac80211: check PN correctly for GCMP-encrypted fragmented MPDUsJohannes Berg2-10/+28
Just like for CCMP we need to check that for GCMP the fragments have PNs that increment by one; the spec was updated to fix this security issue and now has the following text: The receiver shall discard MSDUs and MMPDUs whose constituent MPDU PN values are not incrementing in steps of 1. Adapt the code for CCMP to work for GCMP as well, luckily the relevant fields already alias each other so no code duplication is needed (just check the aliasing with BUILD_BUG_ON.) Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-25Merge tag 'mac80211-for-davem-2016-02-23' of ↵David S. Miller3-8/+10
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Another small set of fixes: * stop critical protocol session on disconnect to avoid it getting stuck * wext: fix two RTNL message ordering issues * fix an uninitialized value (found by KASAN) * fix an out-of-bounds access (also found by KASAN) * clear connection keys when freeing them in all cases (IBSS, all other places already did so) * fix expected throughput unit to get consistent values * set default TX aggregation timeout to 0 in minstrel to avoid (really just hide) issues and perform better ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23mac80211: minstrel_ht: set default tx aggregation timeout to 0Felix Fietkau1-1/+1
The value 5000 was put here with the addition of the timeout field to ieee80211_start_tx_ba_session. It was originally added in mac80211 to save resources for drivers like iwlwifi, which only supports a limited number of concurrent aggregation sessions. Since iwlwifi does not use minstrel_ht and other drivers don't need this, 0 is a better default - especially since there have been recent reports of aggregation setup related issues reproduced with ath9k. This should improve stability without causing any adverse effects. Cc: stable@vger.kernel.org Acked-by: Avery Pennarun <apenwarr@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-02mac80211: minstrel: Change expected throughput unit back to KbpsSven Eckelmann2-2/+3
The change from cur_tp to the function minstrel_get_tp_avg/minstrel_ht_get_tp_avg changed the unit used for the current throughput. For example in minstrel_ht the correct conversion between them would be: mrs->cur_tp / 10 == minstrel_ht_get_tp_avg(..). This factor 10 must also be included in the calculation of minstrel_get_expected_throughput and minstrel_ht_get_expected_throughput to return values with the unit [Kbps] instead of [10Kbps]. Otherwise routing algorithms like B.A.T.M.A.N. V will make incorrect decision based on these values. Its kernel based implementation expects expected_throughput always to have the unit [Kbps] and not sometimes [10Kbps] and sometimes [Kbps]. The same requirement has iw or olsrdv2's nl80211 based statistics module which retrieve the same data via NL80211_STA_INFO_TX_BITRATE. Cc: stable@vger.kernel.org Fixes: 6a27b2c40b48 ("mac80211: restructure per-rate throughput calculation into function") Signed-off-by: Sven Eckelmann <sven@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-02mac80211: minstrel_ht: fix out-of-bound in minstrel_ht_set_best_prob_rateKonstantin Khlebnikov1-4/+5
Patch fixes this splat BUG: KASAN: slab-out-of-bounds in minstrel_ht_update_stats.isra.7+0x6e1/0x9e0 [mac80211] at addr ffff8800cee640f4 Read of size 4 by task swapper/3/0 Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Link: http://lkml.kernel.org/r/CALYGNiNyJhSaVnE35qS6UCGaSb2Dx1_i5HcRavuOX14oTz2P+w@mail.gmail.com Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds10-30/+53
Pull networking fixes from David Miller: "This looks like a lot but it's a mixture of regression fixes as well as fixes for longer standing issues. 1) Fix on-channel cancellation in mac80211, from Johannes Berg. 2) Handle CHECKSUM_COMPLETE properly in xt_TCPMSS netfilter xtables module, from Eric Dumazet. 3) Avoid infinite loop in UDP SO_REUSEPORT logic, also from Eric Dumazet. 4) Avoid a NULL deref if we try to set SO_REUSEPORT after a socket is bound, from Craig Gallek. 5) GRO key comparisons don't take lightweight tunnels into account, from Jesse Gross. 6) Fix struct pid leak via SCM credentials in AF_UNIX, from Eric Dumazet. 7) We need to set the rtnl_link_ops of ipv6 SIT tunnels before we register them, otherwise the NEWLINK netlink message is missing the proper attributes. From Thadeu Lima de Souza Cascardo. 8) Several Spectrum chip bug fixes for mlxsw switch driver, from Ido Schimmel 9) Handle fragments properly in ipv4 easly socket demux, from Eric Dumazet. 10) Don't ignore the ifindex key specifier on ipv6 output route lookups, from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (128 commits) tcp: avoid cwnd undo after receiving ECN irda: fix a potential use-after-free in ircomm_param_request net: tg3: avoid uninitialized variable warning net: nb8800: avoid uninitialized variable warning net: vxge: avoid unused function warnings net: bgmac: clarify CONFIG_BCMA dependency net: hp100: remove unnecessary #ifdefs net: davinci_cpdma: use dma_addr_t for DMA address ipv6/udp: use sticky pktinfo egress ifindex on connect() ipv6: enforce flowi6_oif usage in ip6_dst_lookup_tail() netlink: not trim skb for mmaped socket when dump vxlan: fix a out of bounds access in __vxlan_find_mac net: dsa: mv88e6xxx: fix port VLAN maps fib_trie: Fix shift by 32 in fib_table_lookup net: moxart: use correct accessors for DMA memory ipv4: ipconfig: avoid unused ic_proto_used symbol bnxt_en: Fix crash in bnxt_free_tx_skbs() during tx timeout. bnxt_en: Exclude rx_drop_pkts hw counter from the stack's rx_dropped counter. bnxt_en: Ring free response from close path should use completion ring net_sched: drr: check for NULL pointer in drr_dequeue ...
2016-01-29mac80211: fix use of uninitialised values in RX aggregationChris Bainbridge1-1/+1
Use kzalloc instead of kmalloc for struct tid_ampdu_rx to initialize the "removed" field (all others are initialized manually). That fixes: UBSAN: Undefined behaviour in net/mac80211/rx.c:932:29 load of value 2 is not a valid value for type '_Bool' CPU: 3 PID: 1134 Comm: kworker/u16:7 Not tainted 4.5.0-rc1+ #265 Workqueue: phy0 rt2x00usb_work_rxdone 0000000000000004 ffff880254a7ba50 ffffffff8181d866 0000000000000007 ffff880254a7ba78 ffff880254a7ba68 ffffffff8188422d ffffffff8379b500 ffff880254a7bab8 ffffffff81884747 0000000000000202 0000000348620032 Call Trace: [<ffffffff8181d866>] dump_stack+0x45/0x5f [<ffffffff8188422d>] ubsan_epilogue+0xd/0x40 [<ffffffff81884747>] __ubsan_handle_load_invalid_value+0x67/0x70 [<ffffffff82227b4d>] ieee80211_sta_reorder_release.isra.16+0x5ed/0x730 [<ffffffff8222ca14>] ieee80211_prepare_and_rx_handle+0xd04/0x1c00 [<ffffffff8222db03>] __ieee80211_rx_handle_packet+0x1f3/0x750 [<ffffffff8222e4a7>] ieee80211_rx_napi+0x447/0x990 While at it, convert to use sizeof(*tid_agg_rx) instead. Fixes: 788211d81bfdf ("mac80211: fix RX A-MPDU session reorder timer deletion") Cc: stable@vger.kernel.org Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com> [reword commit message, use sizeof(*tid_agg_rx)] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-26mac80211: Requeue work after scan complete for all VIF types.Sachin Kulkarni5-19/+11
During a sw scan ieee80211_iface_work ignores work items for all vifs. However after the scan complete work is requeued only for STA, ADHOC and MESH iftypes. This occasionally results in event processing getting delayed/not processed for iftype AP when it coexists with a STA. This can result in data halt and eventually disconnection on the AP interface. Cc: stable@vger.kernel.org Signed-off-by: Sachin Kulkarni <Sachin.Kulkarni@imgtec.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-21net/mac80211/debugfs.c: prevent build failure with CONFIG_UBSAN=yAndrey Ryabinin1-5/+2
With upcoming CONFIG_UBSAN the following BUILD_BUG_ON in net/mac80211/debugfs.c starts to trigger: BUILD_BUG_ON(hw_flag_names[NUM_IEEE80211_HW_FLAGS] != (void *)0x1); It seems, that compiler instrumentation causes some code deoptimizations. Because of that GCC is not being able to resolve condition in BUILD_BUG_ON() at compile time. We could make size of hw_flag_names array unspecified and replace the condition in BUILD_BUG_ON() with following: ARRAY_SIZE(hw_flag_names) != NUM_IEEE80211_HW_FLAGS That will have the same effect as before (adding new flag without updating array will trigger build failure) except it doesn't fail with CONFIG_UBSAN. As a bonus this patch slightly decreases size of hw_flag_names array. Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14mac80211: Don't buffer non-bufferable MMPDUsHelmut Schaa1-0/+5
Non-bufferable MMPDUs are sent out to STAs even while in PS mode (for example probe responses). Applying filtered frame handling for these doesn't seem to make much sense and will only create more air utilization when the STA wakes up. Hence, apply filtered frame handling only for bufferable MMPDUs. Discovered while testing an old VOIP phone that started probing for APs while in PS mode. The mac80211/ath9k AP where the STA is associated would reply with a probe response but the phone sometimes moved to a new channel already and couldn't ack the probe response anymore. In that case mac80211 applied filtered frame handling for the un-acked probe response. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14mac80211: handle sched_scan_stopped vs. hw restart raceEliad Peller2-0/+9
On hw restart, mac80211 might try to reconfigure already stopped sched scan, if ieee80211_sched_scan_stopped_work() wasn't scheduled yet. This in turn will keep the device driver with scheduled scan configured, while both mac80211 and cfg80211 will clear their sched scan state once the work is scheduled. Fix it by ignoring ieee80211_sched_scan_stopped() calls while in hw restart, and flush the work before starting the reconfiguration. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14mac80211: fix PS-Poll handlingEmmanuel Grumbach1-1/+1
My commit below broken PS-Poll handling. In case the driver has no frames buffered, driver_release_tids will be 0, but calling find_highest_prio_tid() with 0 as a parameter is not a good idea: fls(0) - 1 = -1. This bug caused mac80211 to think that frames were buffered in the driver which in turn was confused because mac80211 was asking to release frames that were not reported to exist. On iwlwifi, this led to the WARNING below: WARNING: CPU: 0 PID: 11230 at drivers/net/wireless/intel/iwlwifi/mvm/sta.c:1733 iwl_mvm_sta_modify_sleep_tx_count+0x2af/0x320 [iwlmvm]() ffffffffc0627c60 ffff8800069b7648 ffffffff81888913 0000000000000000 0000000000000000 ffff8800069b7688 ffffffff81089d6a ffff8800069b7678 0000000000000001 ffff88003b35abf0 ffff88000698b128 ffff8800069b76d4 Call Trace: [<ffffffff81888913>] dump_stack+0x4c/0x65 [<ffffffff81089d6a>] warn_slowpath_common+0x8a/0xc0 [<ffffffff81089e5a>] warn_slowpath_null+0x1a/0x20 [<ffffffffc05f36bf>] iwl_mvm_sta_modify_sleep_tx_count+0x2af/0x320 [iwlmvm] [<ffffffffc05dae41>] iwl_mvm_mac_release_buffered_frames+0x31/0x40 [iwlmvm] [<ffffffffc045d8b6>] ieee80211_sta_ps_deliver_response+0x6e6/0xd80 [mac80211] [<ffffffffc0461296>] ieee80211_sta_ps_deliver_poll_response+0x26/0x30 [mac80211] [<ffffffffc048f743>] ieee80211_rx_handlers+0xa83/0x2900 [mac80211] [<ffffffffc04917ad>] ieee80211_prepare_and_rx_handle+0x1ed/0xa70 [mac80211] [<ffffffffc045e3d5>] ? sta_info_get_bss+0x5/0x4a0 [mac80211] [<ffffffffc04925b6>] ieee80211_rx_napi+0x586/0xcd0 [mac80211] [<ffffffffc05eaa3e>] iwl_mvm_rx_rx_mpdu+0x59e/0xc60 [iwlmvm] Fixes: 0ead2510f8ce ("mac80211: allow the driver to send EOSP when needed") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14mac80211: clear local->sched_scan_req properly on reconfigEliad Peller1-1/+4
On reconfig, in case of sched_scan_req->n_scan_plans > 1, local->sched_scan_req was never cleared, although cfg80211_sched_scan_stopped_rtnl() was called, resulting in local->sched_scan_req holding a stale and preventing further scheduled scan requests. Clear it explicitly in this case. Fixes: 42a7e82c6792 ("mac80211: Do not restart scheduled scan if multiple scan plans are set") Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14mac80211: avoid ROC during hw restartEliad Peller3-2/+18
Defer ROC requests during hw restart, as the driver might not be fully configured in this stage (e.g. channel contexts were not added yet) Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14mac80211: fix remain-on-channel cancellationJohannes Berg1-2/+4
Ilan's previous commit 1b894521e60c ("mac80211: handle HW ROC expired properly") neglected to take into account that hw_begun was now always set in the software implementation as well as the offloaded case. Fix hw_begun to only apply to the offloaded case to make the check in Ilan's commit safe and correct. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14mac80211: recalculate SW ROC only when neededJohannes Berg1-5/+1
The current (new) code recalculates the new work timeout for software remain-on-channel whenever any item started. In two of the callers of ieee80211_handle_roc_started(), this is completely pointless since they're for hardware and will skip the recalculation entirely; it's necessary only in the case of having just added a new item to the list, as in the last remaining case the recalculation had just been done. This last case, however, is also problematic - if one of the items on the list actually expires during the recalc the list iteration outside becomes corrupted and crashes. Fix this by moving the recalculation to the only place where it's required. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller6-69/+81
Conflicts: drivers/net/geneve.c Here we had an overlapping change, where in 'net' the extraneous stats bump was being removed whilst in 'net-next' the final argument to udp_tunnel6_xmit_skb() was being changed. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15mac80211: handle width changes from opmode notification IE in beaconEyal Shapira5-14/+8
An AP can send an operating channel width change in a beacon opmode notification IE as long as there's a change in the nss as well (See 802.11ac-2013 section 10.41). So don't limit updating to nss only from an opmode notification IE. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-15mac80211: suppress unchanged "limiting TX power" messagesJohannes Berg1-5/+10
When the AP is advertising limited TX power, the message can be printed over and over again. Suppress it when the power level isn't changing. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=106011 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-15mac80211: reprogram in interface orderJohannes Berg1-39/+37
During reprogramming, mac80211 currently first adds all the channel contexts, then binds them to the vifs and then goes to reconfigure all the interfaces. Drivers might, perhaps implicitly, rely on the operation order for certain things that typically happen within a single function elsewhere in mac80211. To avoid problems with that, reorder the code in mac80211's restart/reprogramming to work fully within the interface loop so that the order of operations is like in normal operation. For iwlwifi, this fixes a firmware crash when reprogramming with an AP/GO interface active. Reported-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-15mac80211: run scan completed work on reconfig failureJohannes Berg1-11/+26
When reconfiguration during resume fails while a scan is pending for completion work, that work will never run, and the scan will be stuck forever. Factor out the code to recover this and call it also in ieee80211_handle_reconfig_failure(). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-07mac80211: handle HW ROC expired properlyIlan Peer1-1/+5
In case of HW ROC, when the driver reports that the ROC expired, it is not sufficient to purge the ROCs based on the remaining time, as it possible that the device finished the ROC session before the actual requested duration. To handle such cases, in case of ROC expired notification from the driver, complete all the ROCs which are marked with hw_begun, regardless of the remaining duration. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04mac80211: reject zero cookie in mgmt-tx/roc cancelJohannes Berg1-0/+3
When cancelling, you can cancel "any" (first in list) mgmt-tx or remain-on-channel operation by using the value 0 for the cookie along with the *opposite* operation, i.e. * cancel the first mgmt-tx by cancelling roc with 0 cookie * cancel the first roc by cancelling mgmt-tx with 0 cookie This isn't really that bad since userspace should only pass cookies that we gave it, but could lead to hard-to-debug issues so better prevent it and reject zero values since we never hand those out. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04mac80211: Allow a STA to join an IBSS with 80+80 MHz channelJouni Malinen1-0/+1
While it was possible to create an IBSS with 80+80 MHz channel, joining such an IBSS resulted in falling back to 20 MHz channel with VHT disabled due to a missing switch case for 80+80. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04mac80211: rewrite remain-on-channel logicJohannes Berg3-291/+316
Jouni found a bug in the remain-on-channel logic: when a short item is queued, a long item is combined with it extending the original one, and then the long item is deleted, the timeout doesn't go back to the short one, and the short item ends up taking a long time. In this case, this showed as blocking scan when running two test cases back to back - the scan from the second was delayed even though all the remain-on-channel items should long have been gone. Fixing this with the current data structures turns out to be a bit complicated, we just remove the long item from the dependents list right now and don't recalculate the timeouts. There's a somewhat similar bug where we delete the short item and all the dependents go with it; to fix this we'd have to move them from the dependents to the real list. Instead of trying to do that, rewrite the code to not have all this complexity in the data structures: use a single list and allow more than one entry in it being marked as started. This makes the code a bit more complex, the worker needs to understand that it might need to just remove one of the started items, while keeping the device off-channel, but that's not more complicated than the nested data structures. This then fixes both issues described, and makes it easier to also limit the overall off-channel time when combining. TODO: as before, with hardware remain-on-channel, deleting an item after combining results in cancelling them all - we can keep track of the time elapsed and only cancel after that to fix this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04mac80211: simplify ack_skb handlingJohannes Berg3-18/+13
Since the cookie is assigned inside ieee80211_make_ack_skb() now, we no longer need to return the ack_skb as the cookie and can simplify the function's return and the callers. Also rename it to ieee80211_attach_ack_skb() to more accurately reflect its purpose. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04mac80211: move off-channel/mgmt-tx code to offchannel.cJohannes Berg3-495/+502
This is quite a bit of code that logically depends here since it has to deal with all the remain-on-channel logic. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04mac80211: fix mgmt-tx abort cookie and leakJohannes Berg1-3/+2
If a mgmt-tx operation is aborted before it runs, the wrong cookie is reported back to userspace, and the ack_skb gets leaked since the frame is freed directly instead of freeing it using ieee80211_free_txskb(). Fix that. Fixes: 3b79af973cf4 ("mac80211: stop using pointers as userspace cookies") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04mac80211: catch queue stop underflowJohannes Berg1-2/+5
If some code stops the queues more times than having started (for when refcounting is used), warn on and reset the counter to 0 to avoid blocking forever. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04mac80211: properly free TX skbs when monitor TX failsJohannes Berg1-1/+1
We need to free all skbs here, not just the one we peeked from the list. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04mac80211: properly free skb when r-o-c for TX failsJohannes Berg1-1/+1
When freeing the TX skb for an off-channel TX, use the correct API to also free the ACK skb that might have been allocated. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04Revert "mac80211: don't advertise NL80211_FEATURE_FULL_AP_CLIENT_STATE"Johannes Berg1-1/+2
This reverts commit 45bb780a2147b9995f3d288c44ecb87ca8a330e2, the previous two patches fixed the functionality. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04cfg80211: handle add_station auth/assoc flag quirksJohannes Berg1-10/+0
When a new station is added to AP/GO interfaces the default behaviour is for it to be added authenticated and associated, due to backwards compatibility. To prevent that, the driver must be able to do that (setting the NL80211_FEATURE_FULL_AP_CLIENT_STATE feature flag) and userspace must set the flag mask to auth|assoc and clear the set. Handle this quirk in the API entirely in nl80211, and always push the full flags to the drivers. NL80211_FEATURE_FULL_AP_CLIENT_STATE is still required for userspace to be allowed to set the mask including those bits, but after checking that add both flags to the mask and set in case userspace didn't set them otherwise. This obsoletes the mac80211 code handling this difference, no other driver is currently using these flags. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04mac80211: Add support for aborting an ongoing scanVidyullatha Kanchanapally1-0/+6
This commit adds implementation for abort scan in mac80211. Reviewed-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Vidyullatha Kanchanapally <vkanchan@qti.qualcomm.com> Signed-off-by: Sunil Dutt <usdutt@qti.qualcomm.com> [adjust to wdev change in previous patch and clean up code a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04mac80211: add new IEEE80211_VIF_GET_NOA_UPDATE flagJanusz.Dziedzic@tieto.com1-2/+4
Add new VIF flag, that will allow get NOA update notification when driver will request this, even this is not pure P2P vif (eg. STA vif). Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04mac80211: add atomic uploaded keys iteratorEliad Peller3-4/+55
add ieee80211_iter_keys_rcu() to iterate over uploaded keys in atomic context (when rcu is locked) The station removal code removes the keys only after calling synchronize_net(), so it's not safe to iterate the keys at this point (and postponing the actual key deletion with call_rcu() might result in some badly-ordered ops calls). Add a flag to indicate a station is being removed, and skip the configured keys if it's set. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04mac80211: allow the driver to send EOSP when neededEmmanuel Grumbach2-43/+126
This can happen when the driver needs to send less frames than expected and then needs to close the SP. Mac80211 still needs to set the more_data properly based on its buffer state (ps_tx_buffer and buffered frames on other TIDs). To that end, refactor the code that delivers frames upon uAPSD trigger frames to be able to get only the more_data bit without actually delivering those frames in case the driver is just asking to set a NDP with EOSP and MORE_DATA bit properly set. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04mac80211: remove string from unaligned packet warningJohannes Berg1-2/+1
This really should never happen except very early in the process of bringing up a new driver, at which point you'll have to add more debugging in the driver and this string isn't useful. Remove it and save some size (when it's even compiled in.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04mac80211: mesh: print MAC address instead of pointerJohannes Berg1-2/+2
There's no point in printing the mpath pointer since it can't be used for anything - print the MAC address instead (like in the forwarding case.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04mac80211: allow driver to prevent two stations w/ same addressJohannes Berg2-2/+17
Some devices or drivers cannot deal with having the same station address for different virtual interfaces, say as a client to two virtual AP interfaces. Rather than requiring each driver with a limitation like that to enforce it, add a hardware flag for it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-03mac80211: fix off-channel mgmt-tx uninitialized variable usageJohannes Berg1-2/+6
In the last change here, I neglected to update the cookie in one code path: when a mgmt-tx has no real cookie sent to userspace as it doesn't wait for a response, but is off-channel. The original code used the SKB pointer as the cookie and always assigned the cookie to the TX SKB in ieee80211_start_roc_work(), but my change turned this around and made the code rely on a valid cookie being passed in. Unfortunately, the off-channel no-wait TX path wasn't assigning one at all, resulting in an uninitialized stack value being used. This wasn't handed back to userspace as a cookie (since in the no-wait case there isn't a cookie), but it was tested for non-zero to distinguish between mgmt-tx and off-channel. Fix this by assigning a dummy non-zero cookie unconditionally, and get rid of a misleading comment and some dead code while at it. I'll clean up the ACK SKB handling separately later. Fixes: 3b79af973cf4 ("mac80211: stop using pointers as userspace cookies") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-03mac80211: do not actively scan DFS channelsAntonio Quartulli1-4/+5
DFS channels should not be actively scanned as we can't be sure if we are allowed or not. If the current channel is in the DFS band, active scan might be performed after CSA, but we have no guarantee about other channels, therefore it is safer to prevent active scanning at all. Cc: stable@vger.kernel.org Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-03mac80211: don't teardown sdata on sdata stopEliad Peller1-1/+1
Interfaces are being initialized (setup) on addition, and torn down on removal. However, p2p device is being torn down when stopped, resulting in the next p2p start operation being done on uninitialized interface. Solve it by calling ieee80211_teardown_sdata() only on interface removal (for the non-netdev case). Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [squashed in fix to call teardown after unregister] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-20mac80211: always set the buf_size in AddBA req to 64Gregory Greenman1-1/+2
Advertising reordering window in ADDBA less than 64 can crash some APs, an example is LinkSys WRT120N (with FW v1.0.07 build 002 Jun 18 2012). On the other hand, a driver may need to limit Tx A-MPDU size for its own reasons, like specific HW limitations. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-20mac80211: ensure we don't update tx power on a non-running sdataEmmanuel Grumbach1-1/+2
We can't update the Tx power on the device unless it is running. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=101521. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-17mac80211: mesh: fix call_rcu() usageJohannes Berg1-4/+4
When using call_rcu(), the called function may be delayed quite significantly, and without a matching rcu_barrier() there's no way to be sure it has finished. Therefore, global state that could be gone/freed/reused should never be touched in the callback. Fix this in mesh by moving the atomic_dec() into the caller; that's not really a problem since we already unlinked the path and it will be destroyed anyway. This fixes a crash Jouni observed when running certain tests in a certain order, in which the mesh interface was torn down, the memory reused for a function pointer (work struct) and running that then crashed since the pointer had been decremented by 1, resulting in an invalid instruction byte stream. Cc: stable@vger.kernel.org Fixes: eb2b9311fd00 ("mac80211: mesh path table implementation") Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-17mac80211: don't advertise NL80211_FEATURE_FULL_AP_CLIENT_STATEJohannes Berg1-2/+1
For now, this feature doesn't actually work. To avoid shipping a kernel that has it enabled but where it can't be used disable it for now - we can re-enable it when it's fixed. This partially reverts 44674d9c2267 ("mac80211: advertise support for full station state in AP mode"). Cc: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-05 04:08:33 +0300