summaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)AuthorFilesLines
2020-11-13mac80211: free sta in sta_info_insert_finish() on errorsJohannes Berg1-10/+4
If sta_info_insert_finish() fails, we currently keep the station around and free it only in the caller, but there's only one such caller and it always frees it immediately. As syzbot found, another consequence of this split is that we can put things that sleep only into __cleanup_single_sta() and not in sta_info_free(), but this is the only place that requires such of sta_info_free() now. Change this to free the station in sta_info_insert_finish(), in which case we can still sleep. This will also let us unify the cleanup code later. Cc: stable@vger.kernel.org Fixes: dcd479e10a05 ("mac80211: always wind down STA state") Reported-by: syzbot+32c6c38c4812d22f2f0b@syzkaller.appspotmail.com Reported-by: syzbot+4c81fe92e372d26c4246@syzkaller.appspotmail.com Reported-by: syzbot+6a7fe9faf0d1d61bc24a@syzkaller.appspotmail.com Reported-by: syzbot+abed06851c5ffe010921@syzkaller.appspotmail.com Reported-by: syzbot+b7aeb9318541a1c709f1@syzkaller.appspotmail.com Reported-by: syzbot+d5a9416c6cafe53b5dd0@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20201112112201.ee6b397b9453.I9c31d667a0ea2151441cc64ed6613d36c18a48e0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-12mac80211: minstrel: fix tx status processing corner caseFelix Fietkau1-1/+1
Some drivers fill the status rate list without setting the rate index after the final rate to -1. minstrel_ht already deals with this, but minstrel doesn't, which causes it to get stuck at the lowest rate on these drivers. Fix this by checking the count as well. Cc: stable@vger.kernel.org Fixes: cccf129f820e ("mac80211: add the 'minstrel' rate control algorithm") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20201111183359.43528-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-12mac80211: minstrel: remove deferred sampling codeFelix Fietkau2-22/+4
Deferring sampling attempts to the second stage has some bad interactions with drivers that process the rate table in hardware and use the probe flag to indicate probing packets (e.g. most mt76 drivers). On affected drivers it can lead to probing not working at all. If the link conditions turn worse, it might not be such a good idea to do a lot of sampling for lower rates in this case. Fix this by simply skipping the sample attempt instead of deferring it, but keep the checks that would allow it to be sampled if it was skipped too often, but only if it has less than 95% success probability. Also ensure that IEEE80211_TX_CTL_RATE_CTRL_PROBE is set for all probing packets. Cc: stable@vger.kernel.org Fixes: cccf129f820e ("mac80211: add the 'minstrel' rate control algorithm") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20201111183359.43528-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-12mac80211: fix memory leak on filtered powersave framesFelix Fietkau1-10/+8
After the status rework, ieee80211_tx_status_ext is leaking un-acknowledged packets for stations in powersave mode. To fix this, move the code handling those packets from __ieee80211_tx_status into ieee80211_tx_status_ext Reported-by: Tobias Waldvogel <tobias.waldvogel@gmail.com> Fixes: 3318111cf63d ("mac80211: reduce duplication in tx status functions") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20201111183359.43528-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-30mac80211: don't require VHT elements for HE on 2.4 GHzJohannes Berg1-1/+2
After the previous similar bugfix there was another bug here, if no VHT elements were found we also disabled HE. Fix this to disable HE only on the 5 GHz band; on 6 GHz it was already not disabled, and on 2.4 GHz there need (should) not be any VHT. Fixes: 57fa5e85d53c ("mac80211: determine chandef from HE 6 GHz operation") Link: https://lore.kernel.org/r/20201013140156.535a2fc6192f.Id6e5e525a60ac18d245d86f4015f1b271fce6ee6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-30mac80211: fix kernel-doc markupsMauro Carvalho Chehab1-1/+8
Some identifiers have different names between their prototypes and the kernel-doc markup. Others need to be fixed, as kernel-doc markups should use this format: identifier - description In the specific case of __sta_info_flush(), add a documentation for sta_info_flush(), as this one is the one used outside sta_info.c. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Link: https://lore.kernel.org/r/978d35eef2dc76e21c81931804e4eaefbd6d635e.1603469755.git.mchehab+huawei@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-30mac80211: always wind down STA stateJohannes Berg1-0/+18
When (for example) an IBSS station is pre-moved to AUTHORIZED before it's inserted, and then the insertion fails, we don't clean up the fast RX/TX states that might already have been created, since we don't go through all the state transitions again on the way down. Do that, if it hasn't been done already, when the station is freed. I considered only freeing the fast TX/RX state there, but we might add more state so it's more robust to wind down the state properly. Note that we warn if the station was ever inserted, it should have been properly cleaned up in that case, and the driver will probably not like things happening out of order. Reported-by: syzbot+2e293dbd67de2836ba42@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20201009141710.7223b322a955.I95bd08b9ad0e039c034927cce0b75beea38e059b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-30mac80211: fix use of skb payload instead of headerJohannes Berg1-13/+24
When ieee80211_skb_resize() is called from ieee80211_build_hdr() the skb has no 802.11 header yet, in fact it consist only of the payload as the ethernet frame is removed. As such, we're using the payload data for ieee80211_is_mgmt(), which is of course completely wrong. This didn't really hurt us because these are always data frames, so we could only have added more tailroom than we needed if we determined it was a management frame and sdata->crypto_tx_tailroom_needed_cnt was false. However, syzbot found that of course there need not be any payload, so we're using at best uninitialized memory for the check. Fix this to pass explicitly the kind of frame that we have instead of checking there, by replacing the "bool may_encrypt" argument with an argument that can carry the three possible states - it's not going to be encrypted, it's a management frame, or it's a data frame (and then we check sdata->crypto_tx_tailroom_needed_cnt). Reported-by: syzbot+32fd1a1bfe355e93f1e2@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20201009132538.e1fd7f802947.I799b288466ea2815f9d4c84349fae697dca2f189@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-30mac80211: fix regression where EAPOL frames were sent in plaintextMathy Vanhoef1-3/+4
When sending EAPOL frames via NL80211 they are treated as injected frames in mac80211. Due to commit 1df2bdba528b ("mac80211: never drop injected frames even if normally not allowed") these injected frames were not assigned a sta context in the function ieee80211_tx_dequeue, causing certain wireless network cards to always send EAPOL frames in plaintext. This may cause compatibility issues with some clients or APs, which for instance can cause the group key handshake to fail and in turn would cause the station to get disconnected. This commit fixes this regression by assigning a sta context in ieee80211_tx_dequeue to injected frames as well. Note that sending EAPOL frames in plaintext is not a security issue since they contain their own encryption and authentication protection. Cc: stable@vger.kernel.org Fixes: 1df2bdba528b ("mac80211: never drop injected frames even if normally not allowed") Reported-by: Thomas Deutschmann <whissi@gentoo.org> Tested-by: Christian Hesse <list@eworm.de> Tested-by: Thomas Deutschmann <whissi@gentoo.org> Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be> Link: https://lore.kernel.org/r/20201019160113.350912-1-Mathy.Vanhoef@kuleuven.be Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-14mac80211: use new function dev_fetch_sw_netstatsHeiner Kallweit1-22/+1
Simplify the code by using new function dev_fetch_sw_netstats(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/93dda477-70ae-0ccf-71b4-bfebb66c9beb@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-08mac80211: copy configured beacon tx rate to driverRajkumar Manoharan1-0/+3
The user is allowed to change beacon tx rate (HT/VHT/HE) from hostapd. This information needs to be passed to the driver when the rate control is offloaded to the firmware. The driver capability of allowing beacon rate is already validated in cfg80211, so simply passing the rate information to the driver is enough. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1601762658-15627-1-git-send-email-rmanohar@codeaurora.org [adjust commit message slightly] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-08mac80211: initialize last_rate for S1G STAsThomas Pedersen6-1/+25
last_rate is initialized to zero by sta_info_alloc(), but this indicates legacy bitrate for the last TX rate (and invalid for the last RX rate). To avoid a warning when decoding the last rate as legacy (before a data frame has been sent), initialize them as S1G MCS. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20201005164522.18069-2-thomas@adapt-ip.com [rename to ieee80211_s1g_sta_rate_init(), seems more appropriate] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-08mac80211: handle lack of sband->bitrates in ratesThomas Pedersen2-1/+6
Even though a driver or mac80211 shouldn't produce a legacy bitrate if sband->bitrates doesn't exist, don't crash if that is the case either. This fixes a kernel panic if station dump is run before last_rate can be updated with a data frame when sband->bitrates is missing (eg. in S1G bands). Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20201005164522.18069-1-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-02mac80211: avoid processing non-S1G elements on S1G bandThomas Pedersen1-6/+9
In ieee80211_determine_chantype(), the sband->ht_cap was being processed before S1G Operation element. Since the HT capability element should not be present on the S1G band, avoid processing potential garbage by moving the call to ieee80211_apply_htcap_overrides() to after the S1G block. Also, in case of a missing S1G Operation element, we would continue trying to process non-S1G elements (and return with a channel width of 20MHz). Instead, just assume primary channel is equal to operating and infer the operating width from the BSS channel, then return. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20201001174748.24520-1-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: Support not iterating over not-sdata-in-driver ifacesBen Greear1-0/+3
Allow drivers to request that interface-iterator does NOT iterate over interfaces that are not sdata-in-driver. This will allow us to fix crashes in ath10k (and possibly other drivers). To summarize Johannes' explanation: Consider add interface wlan0 add interface wlan1 iterate active interfaces -> wlan0 wlan1 add interface wlan2 iterate active interfaces -> wlan0 wlan1 wlan2 If you apply this scenario to a restart, which ought to be functionally equivalent to the normal startup, just compressed in time, you're basically saying that today you get add interface wlan0 add interface wlan1 iterate active interfaces -> wlan0 wlan1 wlan2 << problem here add interface wlan2 iterate active interfaces -> wlan0 wlan1 wlan2 which yeah, totally seems wrong. But fixing that to be add interface wlan0 add interface wlan1 iterate active interfaces -> <nothing> add interface wlan2 iterate active interfaces -> <nothing> (or maybe -> wlan0 wlan1 wlan2 if the reconfig already completed) This is also at least somewhat wrong, but better to not iterate over something that exists in the driver than iterate over something that does not. Originally the first issue was causing crashes in testing with lots of station vdevs on an ath10k radio, combined with firmware crashing. I ran with a similar patch for years with no obvious bad results, including significant testing with ath9k and ath10k. Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20200922191957.25257-1-greearb@candelatech.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: fix some more kernel-doc in meshJohannes Berg2-0/+5
Add a few more missing kernel-doc annotations in mesh code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200928135129.6409460c28b7.I43657d0b70398723e59e4e724f56af88af0fec7e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: fix regression in sta connection monitorFelix Fietkau2-5/+15
When a frame was acked and probe frames were sent, the connection monitoring needs to be reset, otherwise it will keep probing until the connection is considered dead, even though frames have been acked in the mean time. Fixes: 9abf4e49830d ("mac80211: optimize station connection monitor") Reported-by: Georgi Valkov <gvalkov@abv.bg> Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200927105605.97954-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: support S1G associationThomas Pedersen5-13/+128
The changes required for associating in S1G are: - apply S1G BSS channel info before assoc - mark all S1G STAs as QoS STAs - include and parse AID request element - handle new Association Response format - don't fail assoc if supported rates element is missing Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-15-thomas@adapt-ip.com [pass skb to ieee80211_add_aid_request_ie(), remove unused variable 'bss'] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: receive and process S1G beaconsThomas Pedersen5-65/+159
S1G beacons are 802.11 Extension Frames, so the fixed header part differs from regular beacons. Add a handler to process S1G beacons and abstract out the fetching of BSSID and element start locations in the beacon body handler. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-14-thomas@adapt-ip.com [don't rename, small coding style cleanups] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: avoid rate init for S1G bandThomas Pedersen1-0/+6
minstrel_ht is confused by the lack of sband->bitrates, and S1G will likely require a unique RC algorithm, so avoid rate init for now if STA is on the S1G band. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-13-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: handle S1G low ratesThomas Pedersen1-7/+26
S1G doesn't have legacy (sband->bitrates) rates, only MCS. For now, just send a frame at MCS 0 if a low rate is requested. Note we also redefine (since we're out of TX flags) TX_RC_VHT_MCS as TX_RC_S1G_MCS to indicate an S1G MCS. This is probably OK as VHT MCS is not valid on S1G band and vice versa. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-12-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: don't calculate duration for S1GThomas Pedersen1-0/+4
For now just skip the duration calculation for frames transmitted on the S1G band and avoid a warning. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-11-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: encode listen interval for S1GThomas Pedersen3-4/+28
S1G allows listen interval up to 2^14 * 10000 beacon intervals. In order to do this listen interval needs a scaling factor applied to the lower 14 bits. Calculate this and properly encode the listen interval for S1G STAs. See IEEE802.11ah-2016 Table 9-44a for reference. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-10-thomas@adapt-ip.com [move listen_int_usf into function using it] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: convert S1G beacon to scan resultsThomas Pedersen4-5/+40
This commit finds the correct offset for Information Elements in S1G beacon frames so they can be reported in scan results. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-8-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: support S1G STA capabilitiesThomas Pedersen3-0/+54
Include the S1G Capabilities element in an association request, and support the cfg80211 capability overrides. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-5-thomas@adapt-ip.com [pass skb to ieee80211_add_s1g_capab_ie(), small code style edits] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: s1g: choose scanning width based on frequencyThomas Pedersen1-0/+17
An S1G BSS can beacon at either 1 or 2 MHz and the channel width is unique to a given frequency. Ignore scan channel width for now and use the allowed channel width. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-3-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: get correct default channel width for S1GThomas Pedersen1-1/+8
When deleting a channel context, mac80211 would assing NL80211_CHAN_WIDTH_20_NOHT as the default channel width. This is wrong in S1G however, so instead get the allowed channel width for a given channel. Fixes eg. configuring strange (20Mhz) width during a scan on the S1G band. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-2-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: fix some missing kernel-docJohannes Berg1-0/+2
Two parameters are not described, add them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200924192511.21411377b0a8.I1add147d782a3bf38287bde412dc98f69323c732@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28nl80211/cfg80211: support 6 GHz scanningTova Mussai1-2/+7
Support 6 GHz scanning, by * a new scan flag to scan for colocated BSSes advertised by (and found) APs on 2.4 & 5 GHz * doing the necessary reduced neighbor report parsing for this, to find them * adding the ability to split the scan request in case the device by itself cannot support this. Also add some necessary bits in mac80211 to not break with these changes. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200918113313.232917c93af9.Ida22f0212f9122f47094d81659e879a50434a6a2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: Inform AP when returning operating channelLoic Poulain2-30/+9
Because we can miss AP wakeup (beacon) while scanning other channels, it's better go into wakeup state and inform the AP of that upon returning to the operating channel, rather than staying asleep and waiting for the next TIM indicating traffic for us. This saves precious time, especially when we only have 200ms inter- scan period for monitoring the active connection. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1593420923-26668-1-git-send-email-loic.poulain@linaro.org [rewrite commit message a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller5-15/+26
Two minor conflicts: 1) net/ipv4/route.c, adding a new local variable while moving another local variable and removing it's initial assignment. 2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes. One pretty prints the port mode differently, whilst another changes the driver to try and obtain the port mode from the port node rather than the switch node. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18mac80211: Unsolicited broadcast probe response supportAloka Dixit3-0/+77
This patch adds mac80211 support to configure unsolicited broadcast probe response transmission for in-band discovery in 6GHz. Changes include functions to store and retrieve probe response template, and packet interval (0 - 20 TUs). Setting interval to 0 disables the unsolicited broadcast probe response transmission. Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Link: https://lore.kernel.org/r/010101747a946b35-ad25858a-1f1f-48df-909e-dc7bf26d9169-000000@us-west-2.amazonses.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: Add FILS discovery supportAloka Dixit3-6/+83
This patch adds mac80211 support to configure FILS discovery transmission. Changes include functions to store and retrieve FILS discovery template, minimum and maximum packet intervals. Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Link: https://lore.kernel.org/r/20200805011838.28166-3-alokad@codeaurora.org [remove SUPPORTS_FILS_DISCOVERY, driver can just set wiphy info] Link: https://lore.kernel.org/r/010101747a7b3cbb-6edaa89c-436d-4391-8765-61456d7f5f4e-000000@us-west-2.amazonses.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: fix 80 MHz association to 160/80+80 AP on 6 GHzJohn Crispin1-3/+4
When trying to associate to an AP support 180 or 80+80 MHz on 6 GHz with a STA that only has 80 Mhz support the cf2 field inside the chandef will get set causing the association to fail when trying to validate the chandef. Fix this by checking the support flags prior to setting cf2. Fixes: 57fa5e85d53ce ("mac80211: determine chandef from HE 6 GHz operation") Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20200918115304.1135693-1-john@phrozen.org [reword commit message a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: allow bigger A-MSDU sizes in VHT, even if HT is limitedFelix Fietkau1-4/+0
Some APs (e.g. Asus RT-AC88U) have been observed to report an HT MSDU size limit of 3839 and a VHT limit of 7991. These APs can handle bigger frames than 3839 bytes just fine, so we should remove the VHT limit based on the HT capabilities. This improves tx throughput. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200916164611.8022-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: reorganize code to remove a forward declarationFelix Fietkau1-473/+471
Remove the newly added ieee80211_set_vif_encap_ops declaration. No further code changes. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-15-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: extend ieee80211_tx_status_ext to support bulk freeFelix Fietkau1-2/+8
Store processed skbs ready to be freed in a list so the driver bulk free them Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-13-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: support using ieee80211_tx_status_ext to free skbs without status infoFelix Fietkau1-11/+16
For encap-offloaded packets, ieee80211_free_txskb cannot be used, since it does not have the vif pointer. Using ieee80211_tx_status_ext for this purpose has the advantage of being able avoid an extra station lookup for AQL Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-12-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: unify 802.3 (offload) and 802.11 tx status codepathFelix Fietkau1-64/+28
Make ieee80211_tx_status_8023 call ieee80211_tx_status_ext, similar to ieee80211_tx_status. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-11-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: optimize station connection monitorFelix Fietkau5-47/+22
Calling mod_timer for every rx/tx packet can be quite expensive. Instead of constantly updating the timer, we can simply let it run out and check the timestamp of the last ACK or rx packet to re-arm it. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-9-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: notify the driver when a sta uses 4-address modeFelix Fietkau4-0/+45
This is needed for encapsulation offload of 4-address mode packets Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-14-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: swap NEED_TXPROCESSING and HW_80211_ENCAP tx flagsFelix Fietkau5-14/+14
In order to unify the tx status path, the hw 802.11 encapsulation flag needs to survive the trip to the tx status call. Since we don't have any free bits in info->flags, we need to move one. IEEE80211_TX_INTFL_NEED_TXPROCESSING is only used internally in mac80211, and only before the call into the driver. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-10-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: remove tx status call to ieee80211_sta_register_airtimeFelix Fietkau1-6/+0
All drivers using airtime fairness are calling ieee80211_sta_register_airtime directly, now they must. Document this as well. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-8-nbd@nbd.name [johannes: update the documentation to suit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: reduce duplication in tx status functionsFelix Fietkau1-66/+35
Move redundant functionality from __ieee80211_tx_status into ieee80211_tx_status_ext. Preparation for unifying with the 802.3 tx status codepath. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-7-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: rework tx encapsulation offload APIFelix Fietkau7-87/+156
The current API (which lets the driver turn on/off per vif directly) has a number of limitations: - it does not deal with AP_VLAN - conditions for enabling (no tkip, no monitor) are only checked at add_interface time - no way to indicate 4-addr support In order to address this, store offload flags in struct ieee80211_vif (easy to extend for decap offload later). mac80211 initially sets the enable flag, but gives the driver a chance to modify it before its settings are applied. In addition to the .add_interface op, a .update_vif_offload op is introduced, which can be used for runtime changes. If a driver can't disable encap offload at runtime, or if it has some extra limitations, it can simply override the flags within those ops. Support for encap offload with 4-address mode interfaces can be enabled by setting a flag from .add_interface or .update_vif_offload. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-6-nbd@nbd.name [resolved conflict with commit aa2092a9bab3 ("ath11k: add raw mode and software crypto support")] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: set info->control.hw_key for encap offload packetsFelix Fietkau1-0/+5
This is needed for drivers that don't do the key lookup themselves Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-5-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: skip encap offload for tx multicast/control packetsFelix Fietkau1-55/+19
This simplifies the checks in the encap offload tx handler and allows using it in cases where software crypto is used for multicast packets, e.g. when using an AP_VLAN. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-4-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: check and refresh aggregation session in encap offload txFelix Fietkau1-0/+18
Update the last_tx timestamp to avoid tearing down the aggregation session early. Fall back to the slow path if the session setup is still running Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: add missing queue/hash initialization to 802.3 xmitFelix Fietkau1-0/+6
Fixes AQL for encap-offloaded tx Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: do not allow bigger VHT MPDUs than the hardware supportsFelix Fietkau1-4/+4
Limit maximum VHT MPDU size by local capability. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200917125031.45009-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-18 07:46:29 +0300