summaryrefslogtreecommitdiff
path: root/net/ipv6/ndisc.c
AgeCommit message (Collapse)AuthorFilesLines
2016-02-11ipv6: add option to drop unsolicited neighbor advertisementsJohannes Berg1-0/+9
In certain 802.11 wireless deployments, there will be NA proxies that use knowledge of the network to correctly answer requests. To prevent unsolicitd advertisements on the shared medium from being a problem, on such deployments wireless needs to drop them. Enable this by providing an option called "drop_unsolicited_na". Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-24ipv6: honor ifindex in case we receive ll addresses in router advertisementsHannes Frederic Sowa1-2/+2
Marc Haber reported we don't honor interface indexes when we receive link local router addresses in router advertisements. Luckily the non-strict version of ipv6_chk_addr already does the correct job here, so we can simply use it to lighten the checks and use those addresses by default without any configuration change. Link: <http://permalink.gmane.org/gmane.linux.network/391348> Reported-by: Marc Haber <mh+netdev@zugschlus.de> Cc: Marc Haber <mh+netdev@zugschlus.de> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-01Revert "ipv6: ndisc: inherit metadata dst when creating ndisc requests"Nicolas Dichtel1-7/+3
This reverts commit ab450605b35caa768ca33e86db9403229bf42be4. In IPv6, we cannot inherit the dst of the original dst. ndisc packets are IPv6 packets and may take another route than the original packet. This patch breaks the following scenario: a packet comes from eth0 and is forwarded through vxlan1. The encapsulated packet triggers an NS which cannot be sent because of the wrong route. CC: Jiri Benc <jbenc@redhat.com> CC: Thomas Graf <tgraf@suug.ch> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13net: Add VRF support to IPv6 stackDavid Ahern1-3/+23
As with IPv4 support for VRFs added to IPv6 stack by replacing hardcoded table ids with possibly device specific ones and manipulating the oif in the flowi6. The flow flags are used to skip oif compare in nexthop lookups if the device is enslaved to a VRF via the L3 master device. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13net: Export fib6_get_table and nd_tblDavid Ahern1-0/+1
Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08net: Pass net into dst_output and remove dst_output_okfnEric W. Biederman1-1/+1
Replace dst_output_okfn with dst_output Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24ipv6: remove unused neigh parameter from ndisc functionsJiri Benc1-10/+7
Since commit 12fd84f4383b1 ("ipv6: Remove unused neigh argument for icmp6_dst_alloc() and its callers."), the neigh parameter of ndisc_send_na and ndisc_send_ns is unused. CC: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-18netfilter: Pass net into okfnEric W. Biederman1-1/+1
This is immediately motivated by the bridge code that chains functions that call into netfilter. Without passing net into the okfns the bridge code would need to guess about the best expression for the network namespace to process packets in. As net is frequently one of the first things computed in continuation functions after netfilter has done it's job passing in the desired network namespace is in many cases a code simplification. To support this change the function dst_output_okfn is introduced to simplify passing dst_output as an okfn. For the moment dst_output_okfn just silently drops the struct net. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-18netfilter: Pass struct net into the netfilter hooksEric W. Biederman1-2/+2
Pass a network namespace parameter into the netfilter hooks. At the call site of the netfilter hooks the path a packet is taking through the network stack is well known which allows the network namespace to be easily and reliabily. This allows the replacement of magic code like "dev_net(state->in?:state->out)" that appears at the start of most netfilter hooks with "state->net". In almost all cases the network namespace passed in is derived from the first network device passed in, guaranteeing those paths will not see any changes in practice. The exceptions are: xfrm/xfrm_output.c:xfrm_output_resume() xs_net(skb_dst(skb)->xfrm) ipvs/ip_vs_xmit.c:ip_vs_nat_send_or_cont() ip_vs_conn_net(cp) ipvs/ip_vs_xmit.c:ip_vs_send_or_cont() ip_vs_conn_net(cp) ipv4/raw.c:raw_send_hdrinc() sock_net(sk) ipv6/ip6_output.c:ip6_xmit() sock_net(sk) ipv6/ndisc.c:ndisc_send_skb() dev_net(skb->dev) not dev_net(dst->dev) ipv6/raw.c:raw6_send_hdrinc() sock_net(sk) br_netfilter_hooks.c:br_nf_pre_routing_finish() dev_net(skb->dev) before skb->dev is set to nf_bridge->physindev In all cases these exceptions seem to be a better expression for the network namespace the packet is being processed in then the historic "dev_net(in?in:out)". I am documenting them in case something odd pops up and someone starts trying to track down what happened. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-18net: Merge dst_output and dst_output_skEric W. Biederman1-1/+1
Add a sock paramter to dst_output making dst_output_sk superfluous. Add a skb->sk parameter to all of the callers of dst_output Have the callers of dst_output_sk call dst_output. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01ipv6: send only one NEWLINK when RA causes changesMarius Tomaschewski1-3/+10
Signed-off-by: Marius Tomaschewski <mt@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01ipv6: send NEWLINK on RA managed/otherconf changesMarius Tomaschewski1-0/+5
The kernel is applying the RA managed/otherconf flags silently and forgets to send ifinfo notify to inform about their change when the router provides a zero reachable_time and retrans_timer as dnsmasq and many routers send it, which just means unspecified by this router and the host should continue using whatever value it is already using. Userspace may monitor the ifinfo notifications to activate dhcpv6. Signed-off-by: Marius Tomaschewski <mt@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21ipv6: ndisc: inherit metadata dst when creating ndisc requestsJiri Benc1-3/+7
If output device wants to see the dst, inherit the dst of the original skb in the ndisc request. This is an IPv6 counterpart of commit 0accfc268f4d ("arp: Inherit metadata dst when creating ARP requests"). Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+6
Conflicts: arch/s390/net/bpf_jit_comp.c drivers/net/ethernet/ti/netcp_ethss.c net/bridge/br_multicast.c net/ipv4/ip_fragment.c All four conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31net/ipv6: add sysctl option accept_ra_min_hop_limitHangbin Liu1-9/+7
Commit 6fd99094de2b ("ipv6: Don't reduce hop limit for an interface") disabled accept hop limit from RA if it is smaller than the current hop limit for security stuff. But this behavior kind of break the RFC definition. RFC 4861, 6.3.4. Processing Received Router Advertisements A Router Advertisement field (e.g., Cur Hop Limit, Reachable Time, and Retrans Timer) may contain a value denoting that it is unspecified. In such cases, the parameter should be ignored and the host should continue using whatever value it is already using. If the received Cur Hop Limit value is non-zero, the host SHOULD set its CurHopLimit variable to the received value. So add sysctl option accept_ra_min_hop_limit to let user choose the minimum hop limit value they can accept from RA. And set default to 1 to meet RFC standards. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30ipv6: flush nd cache on IFF_NOARP changeEric Dumazet1-0/+6
This patch is the IPv6 equivalent of commit 6c8b4e3ff81b ("arp: flush arp cache on IFF_NOARP change") Without it, we keep buggy neighbours in the cache, with destination MAC address equal to our own MAC address. Tested: tcpdump -i eth0 -s 0 ip6 -n -e & ip link set dev eth0 arp off ping6 remote // sends buggy frames ip link set dev eth0 arp on ping6 remote // should work once kernel is patched Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Mario Fanelli <mariofanelli@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-25ipv6: Remove external dependency on rt6i_dst and rt6i_srcMartin KaFai Lau1-1/+1
This patch removes the assumptions that the returned rt is always a RTF_CACHE entry with the rt6i_dst and rt6i_src containing the destination and source address. The dst and src can be recovered from the calling site. We may consider to rename (rt6i_dst, rt6i_src) to (rt6i_key_dst, rt6i_key_src) later. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-07netfilter: Pass socket pointer down through okfn().David Miller1-2/+3
On the output paths in particular, we have to sometimes deal with two socket contexts. First, and usually skb->sk, is the local socket that generated the frame. And second, is potentially the socket used to control a tunneling socket, such as one the encapsulates using UDP. We do not want to disassociate skb->sk when encapsulating in order to fix this, because that would break socket memory accounting. The most extreme case where this can cause huge problems is an AF_PACKET socket transmitting over a vxlan device. We hit code paths doing checks that assume they are dealing with an ipv4 socket, but are actually operating upon the AF_PACKET one. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+8
Conflicts: drivers/net/usb/asix_common.c drivers/net/usb/sr9800.c drivers/net/usb/usbnet.c include/linux/usb/usbnet.h net/ipv4/tcp_ipv4.c net/ipv6/tcp_ipv6.c The TCP conflicts were overlapping changes. In 'net' we added a READ_ONCE() to the socket cached RX route read, whilst in 'net-next' Eric Dumazet touched the surrounding code dealing with how mini sockets are handled. With USB, it's a case of the same bug fix first going into net-next and then I cherry picked it back into net. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31netlink: implement nla_put_in_addr and nla_put_in6_addrJiri Benc1-2/+1
IP addresses are often stored in netlink attributes. Add generic functions to do that. For nla_put_in_addr, it would be nicer to pass struct in_addr but this is not used universally throughout the kernel, in way too many places __be32 is used to store IPv4 address. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ipv6: coding style: comparison for equality with NULLIan Morris1-10/+10
The ipv6 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x == NULL and sometimes as !x. !x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-25ipv6: Don't reduce hop limit for an interfaceD.S. Ljungmark1-1/+8
A local route may have a lower hop_limit set than global routes do. RFC 3756, Section 4.2.7, "Parameter Spoofing" > 1. The attacker includes a Current Hop Limit of one or another small > number which the attacker knows will cause legitimate packets to > be dropped before they reach their destination. > As an example, one possible approach to mitigate this threat is to > ignore very small hop limits. The nodes could implement a > configurable minimum hop limit, and ignore attempts to set it below > said limit. Signed-off-by: D.S. Ljungmark <ljungmark@modio.se> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04neigh: Factor out ___neigh_lookup_norefEric W. Biederman1-0/+7
While looking at the mpls code I found myself writing yet another version of neigh_lookup_noref. We currently have __ipv4_lookup_noref and __ipv6_lookup_noref. So to make my work a little easier and to make it a smidge easier to verify/maintain the mpls code in the future I stopped and wrote ___neigh_lookup_noref. Then I rewote __ipv4_lookup_noref and __ipv6_lookup_noref in terms of this new function. I tested my new version by verifying that the same code is generated in ip_finish_output2 and ip6_finish_output2 where these functions are inlined. To get to ___neigh_lookup_noref I added a new neighbour cache table function key_eq. So that the static size of the key would be available. I also added __neigh_lookup_noref for people who want to to lookup a neighbour table entry quickly but don't know which neibhgour table they are going to look up. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03neigh: Don't require dst in neigh_hh_initEric W. Biederman1-0/+1
- Add protocol to neigh_tbl so that dst->ops->protocol is not needed - Acquire the device from neigh->dev This results in a neigh_hh_init that will cache the samve values regardless of the packets flowing through it. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+3
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-06net: ipv6: allow explicitly choosing optimistic addressesErik Kline1-1/+3
RFC 4429 ("Optimistic DAD") states that optimistic addresses should be treated as deprecated addresses. From section 2.1: Unless noted otherwise, components of the IPv6 protocol stack should treat addresses in the Optimistic state equivalently to those in the Deprecated state, indicating that the address is available for use but should not be used if another suitable address is available. Optimistic addresses are indeed avoided when other addresses are available (i.e. at source address selection time), but they have not heretofore been available for things like explicit bind() and sendmsg() with struct in6_pktinfo, etc. This change makes optimistic addresses treated more like deprecated addresses than tentative ones. Signed-off-by: Erik Kline <ek@google.com> Acked-by: Lorenzo Colitti <lorenzo@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26net: ipv6: Add sysctl entry to disable MTU updates from RAHarout Hedeshian1-1/+1
The kernel forcefully applies MTU values received in router advertisements provided the new MTU is less than the current. This behavior is undesirable when the user space is managing the MTU. Instead a sysctl flag 'accept_ra_mtu' is introduced such that the user space can control whether or not RA provided MTU updates should be applied. The default behavior is unchanged; user space must explicitly set this flag to 0 for RA MTUs to be ignored. Signed-off-by: Harout Hedeshian <harouth@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-24ipv6: coding style improvements (remove assignment in if statements)Ian Morris1-3/+4
This change has no functional impact and simply addresses some coding style issues detected by checkpatch. Specifically this change adjusts "if" statements which also include the assignment of a variable. No changes to the resultant object files result as determined by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-11neigh: remove dynamic neigh table registration supportWANG Cong1-2/+2
Currently there are only three neigh tables in the whole kernel: arp table, ndisc table and decnet neigh table. What's more, we don't support registering multiple tables per family. Therefore we can just make these tables statically built-in. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-25ipv6: White-space cleansing : gaps between function and symbol exportIan Morris1-1/+0
This patch makes no changes to the logic of the code but simply addresses coding style issues as detected by checkpatch. Both objdump and diff -w show no differences. This patch removes some blank lines between the end of a function definition and the EXPORT_SYMBOL_GPL macro in order to prevent checkpatch warning that EXPORT_SYMBOL must immediately follow a function. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-25ipv6: White-space cleansing : Line LayoutsIan Morris1-8/+8
This patch makes no changes to the logic of the code but simply addresses coding style issues as detected by checkpatch. Both objdump and diff -w show no differences. A number of items are addressed in this patch: * Multiple spaces converted to tabs * Spaces before tabs removed. * Spaces in pointer typing cleansed (char *)foo etc. * Remove space after sizeof * Ensure spacing around comparators such as if statements. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-25neigh: remove exceptional & on function nameHimangi Saraogi1-1/+1
In this file, function names are otherwise used as pointers without &. A simplified version of the Coccinelle semantic patch that makes this change is as follows: // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-11ipv6: fix the check when handle RALi RongQing1-6/+6
d9333196572(ipv6: Allow accepting RA from local IP addresses.) made the wrong check, whether or not to accept RA with source-addr found on local machine, when accept_ra_from_local is 0. Fixes: d9333196572(ipv6: Allow accepting RA from local IP addresses.) Cc: Ben Greear <greearb@candelatech.com> Cc: Hannes Frederic Sowa <hannes@redhat.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-01ipv6: Allow accepting RA from local IP addresses.Ben Greear1-8/+13
This can be used in virtual networking applications, and may have other uses as well. The option is disabled by default. A specific use case is setting up virtual routers, bridges, and hosts on a single OS without the use of network namespaces or virtual machines. With proper use of ip rules, routing tables, veth interface pairs and/or other virtual interfaces, and applications that can bind to interfaces and/or IP addresses, it is possibly to create one or more virtual routers with multiple hosts attached. The host interfaces can act as IPv6 systems, with radvd running on the ports in the virtual routers. With the option provided in this patch enabled, those hosts can now properly obtain IPv6 addresses from the radvd. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-01ipv6: Add more debugging around accept-ra logic.Ben Greear1-8/+43
This is disabled by default, just like similar debug info already in this module. But, makes it easier to find out why RA is not being accepted when debugging strange behaviour. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16ipv6: update Destination Cache entries when gateway turn into hostDuan Jiong1-5/+2
RFC 4861 states in 7.2.5: The IsRouter flag in the cache entry MUST be set based on the Router flag in the received advertisement. In those cases where the IsRouter flag changes from TRUE to FALSE as a result of this update, the node MUST remove that router from the Default Router List and update the Destination Cache entries for all destinations using that neighbor as a router as specified in Section 7.3.3. This is needed to detect when a node that is used as a router stops forwarding packets due to being configured as a host. Currently, when dealing with NA Message which IsRouter flag changes from TRUE to FALSE, the kernel only removes router from the Default Router List, and don't update the Destination Cache entries. Now in order to update those Destination Cache entries, i introduce function rt6_clean_tohost(). Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10neigh: use tbl->family to distinguish ipv4 from ipv6Jiri Pirko1-1/+1
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10neigh: wrap proc dointvec functionsJiri Pirko1-5/+5
This will be needed later on to provide better management of default values. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10neigh: convert parms to an arrayJiri Pirko1-19/+24
This patch converts the neigh param members to an array. This allows easier manipulation which will be needed later on to provide better management of default values. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-03ipv6: judge the accept_ra_defrtr before calling rt6_route_rcvDuan Jiong1-0/+3
when dealing with a RA message, if accept_ra_defrtr is false, the kernel will not add the default route, and then deal with the following route information options. Unfortunately, those options maybe contain default route, so let's judge the accept_ra_defrtr before calling rt6_route_rcv. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-18net: ipv6: ndisc: Fix warning when CONFIG_SYSCTL=nFabio Estevam1-1/+1
When CONFIG_SYSCTL=n the following build warning happens: net/ipv6/ndisc.c:1730:1: warning: label 'out' defined but not used [-Wunused-label] The 'out' label is only used when CONFIG_SYSCTL=y, so move it inside the 'ifdef CONFIG_SYSCTL' block. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-12ipv6: don't call fib6_run_gc() until routing is readyMichal Kubeček1-7/+11
When loading the ipv6 module, ndisc_init() is called before ip6_route_init(). As the former registers a handler calling fib6_run_gc(), this opens a window to run the garbage collector before necessary data structures are initialized. If a network device is initialized in this window, adding MAC address to it triggers a NETDEV_CHANGEADDR event, leading to a crash in fib6_clean_all(). Take the event handler registration out of ndisc_init() into a separate function ndisc_late_init() and move it after ip6_route_init(). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-6/+8
Conflicts: drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c net/bridge/br_multicast.c net/ipv6/sit.c The conflicts were minor: 1) sit.c changes overlap with change to ip_tunnel_xmit() signature. 2) br_multicast.c had an overlap between computing max_delay using msecs_to_jiffies and turning MLDV2_MRC() into an inline function with a name using lowercase instead of uppercase letters. 3) stmmac had two overlapping changes, one which conditionally allocated and hooked up a dma_cfg based upon the presence of the pbl OF property, and another one handling store-and-forward DMA made. The latter of which should not go into the new of_find_property() basic block. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05ipv6:introduce function to find route for redirectDuan Jiong1-1/+2
RFC 4861 says that the IP source address of the Redirect is the same as the current first-hop router for the specified ICMP Destination Address, so the gateway should be taken into consideration when we find the route for redirect. There was once a check in commit a6279458c534d01ccc39498aba61c93083ee0372 ("NDISC: Search over all possible rules on receipt of redirect.") and the check went away in commit b94f1c0904da9b8bf031667afc48080ba7c3e8c9 ("ipv6: Use icmpv6_notify() to propagate redirect, instead of rt6_redirect()"). The bug is only "exploitable" on layer-2 because the source address of the redirect is checked to be a valid link-local address but it makes spoofing a lot easier in the same L2 domain nonetheless. Thanks very much for Hannes's help. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04ipv6: Don't depend on per socket memory for neighbour discovery messagesThomas Graf1-6/+8
Allocating skbs when sending out neighbour discovery messages currently uses sock_alloc_send_skb() based on a per net namespace socket and thus share a socket wmem buffer space. If a netdevice is temporarily unable to transmit due to carrier loss or for other reasons, the queued up ndisc messages will cosnume all of the wmem space and will thus prevent from any more skbs to be allocated even for netdevices that are able to transmit packets. The number of neighbour discovery messages sent is very limited, use of alloc_skb() bypasses the socket wmem buffer size enforcement while the manual call to skb_set_owner_w() maintains the socket reference needed for the IPv6 output path. This patch has orginally been posted by Eric Dumazet in a modified form. Signed-off-by: Thomas Graf <tgraf@suug.ch> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Fabio Estevam <festevam@gmail.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04net: neighbour: Remove CONFIG_ARPDTim Gardner1-2/+0
This config option is superfluous in that it only guards a call to neigh_app_ns(). Enabling CONFIG_ARPD by default has no change in behavior. There will now be call to __neigh_notify() for each ARP resolution, which has no impact unless there is a user space daemon waiting to receive the notification, i.e., the case for which CONFIG_ARPD was designed anyways. Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Gao feng <gaofeng@cn.fujitsu.com> Cc: Joe Perches <joe@perches.com> Cc: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-01vxlan: add ipv6 proxy supportCong Wang1-4/+4
This patch adds the IPv6 version of "arp_reduce", ndisc_send_na() will be needed. Cc: David S. Miller <davem@davemloft.net> Cc: David Stevens <dlstevens@us.ibm.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-31ipv6: Remove redundant sk variableThomas Graf1-1/+0
A sk variable initialized to ndisc_sk is already available outside of the branch. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29ipv6: drop fragmented ndisc packets by default (RFC 6980)Hannes Frederic Sowa1-0/+17
This patch implements RFC6980: Drop fragmented ndisc packets by default. If a fragmented ndisc packet is received the user is informed that it is possible to disable the check. Cc: Fernando Gont <fernando@gont.com.ar> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-23ipv6: handle Redirect ICMP Message with no Redirected Header optionDuan Jiong1-1/+3
rfc 4861 says the Redirected Header option is optional, so the kernel should not drop the Redirect Message that has no Redirected Header option. In this patch, the function ip6_redirect_no_header() is introduced to deal with that condition. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>