| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Erspan protocol (version 1 and 2) relies on o_key to configure
session id header field. However TUNNEL_KEY bit is cleared in
erspan_xmit since ERSPAN protocol does not set the key field
of the external GRE header and so the configured o_key is not reported
to userspace. The issue can be triggered with the following reproducer:
$ip link add erspan1 type erspan local 192.168.0.1 remote 192.168.0.2 \
key 1 seq erspan_ver 1
$ip link set erspan1 up
$ip -d link sh erspan1
erspan1@NONE: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc pfifo_fast state UNKNOWN mode DEFAULT
link/ether 52:aa:99:95:9a:b5 brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 1500
erspan remote 192.168.0.2 local 192.168.0.1 ttl inherit ikey 0.0.0.1 iseq oseq erspan_index 0
Fix the issue adding TUNNEL_KEY bit to the o_flags parameter in
ipgre_fill_info
Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for your net tree:
1) The nftnl mutex is now per-netns, therefore use reference counter
for matches and targets to deal with concurrent updates from netns.
Moreover, place extensions in a pernet list. Patches from Florian Westphal.
2) Bail out with EINVAL in case of negative timeouts via setsockopt()
through ip_vs_set_timeout(), from ZhangXiaoxu.
3) Spurious EINVAL on ebtables 32bit binary with 64bit kernel, also
from Florian.
4) Reset TCP option header parser in case of fingerprint mismatch,
otherwise follow up overlapping fingerprint definitions including
TCP options do not work, from Fernando Fernandez Mancera.
5) Compilation warning in ipt_CLUSTER with CONFIG_PROC_FS unset.
From Anders Roxell.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When CONFIG_PROC_FS isn't set the variable cn isn't used.
net/ipv4/netfilter/ipt_CLUSTERIP.c: In function ‘clusterip_net_exit’:
net/ipv4/netfilter/ipt_CLUSTERIP.c:849:24: warning: unused variable ‘cn’ [-Wunused-variable]
struct clusterip_net *cn = clusterip_pernet(net);
^~
Rework so the variable 'cn' is declared inside "#ifdef CONFIG_PROC_FS".
Fixes: b12f7bad5ad3 ("netfilter: ipt_CLUSTERIP: remove wrong WARN_ON_ONCE in netns exit routine")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2019-01-25
1) Several patches to fix the fallout from the recent
tree based policy lookup work. From Florian Westphal.
2) Fix VTI for IPCOMP for 'not compressed' IPCOMP packets.
We need an extra IPIP handler to process these packets
correctly. From Su Yanjun.
3) Fix validation of template and selector families for
MODE_ROUTEOPTIMIZATION with ipv4-in-ipv6 packets.
This can lead to a stack-out-of-bounds because
flowi4 struct is treated as flowi6 struct.
Fix from Florian Westphal.
4) Restore the default behaviour of the xfrm set-mark
in the output path. This was changed accidentally
when mark setting was extended to the input path.
From Benedict Wong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ip l add dev tun type gretap key 1000
ip a a dev tun 10.0.0.1/24
Packets with tun-id 1000 can be recived by tun dev. But packet can't
be sent through dev tun for non-tunnel-dst
With this patch: tunnel-dst can be get through lwtunnel like beflow:
ip r a 10.0.0.7 encap ip dst 172.168.0.11 dev tun
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use ERSPAN key header field as tunnel key in gre_parse_header routine
since ERSPAN protocol sets the key field of the external GRE header to
0 resulting in a tunnel lookup fail in ip6gre_err.
In addition remove key field parsing and pskb_may_pull check in
erspan_rcv and ip6erspan_rcv
Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In certain cases, pskb_trim_rcsum() may change skb pointers.
Reinitialize header pointers afterwards to avoid potential
use-after-frees. Add a note in the documentation of
pskb_trim_rcsum(). Found by KASAN.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commit 4cdeeee9252a ("net: udp: prefer listeners bound to an
address"), UDP-Lite only works when specifying a local address for
the sockets.
This is related to the problem addressed in the commit 719f835853a9
("udp: add rehash on connect()"). Moreover, __udp4_lib_lookup() now
looks for a socket immediately in the secondary hash table.
The issue was found with LTP/network tests (UDP-Lite test-cases).
Fixes: 4cdeeee9252a ("net: udp: prefer listeners bound to an address")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Failure __ip_append_data triggers udp_flush_pending_frames, but these
tests happen later. The skb must be freed directly.
Fixes: bec1f6f697362 ("udp: generate gso with UDP_SEGMENT")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As said in draft-foschiano-erspan-03#section4:
Different frame variants known as "ERSPAN Types" can be
distinguished based on the GRE "Protocol Type" field value: Type I
and II's value is 0x88BE while Type III's is 0x22EB [ETYPES].
So set it properly in erspan_xmit() according to erspan_ver. While at
it, also remove the unused parameter 'proto' in erspan_fb_xmit().
Fixes: 94d7d8f29287 ("ip6_gre: add erspan v2 support")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Both gue_err() and gue6_err() incorrectly assume
linear skbs. Fix them to use pskb_may_pull().
BUG: KMSAN: uninit-value in gue6_err+0x475/0xc40 net/ipv6/fou6.c:101
CPU: 0 PID: 18083 Comm: syz-executor1 Not tainted 5.0.0-rc1+ #7
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x173/0x1d0 lib/dump_stack.c:113
kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:600
__msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313
gue6_err+0x475/0xc40 net/ipv6/fou6.c:101
__udp6_lib_err_encap_no_sk net/ipv6/udp.c:434 [inline]
__udp6_lib_err_encap net/ipv6/udp.c:491 [inline]
__udp6_lib_err+0x18d0/0x2590 net/ipv6/udp.c:522
udplitev6_err+0x118/0x130 net/ipv6/udplite.c:27
icmpv6_notify+0x462/0x9f0 net/ipv6/icmp.c:784
icmpv6_rcv+0x18ac/0x3fa0 net/ipv6/icmp.c:872
ip6_protocol_deliver_rcu+0xb5a/0x23a0 net/ipv6/ip6_input.c:394
ip6_input_finish net/ipv6/ip6_input.c:434 [inline]
NF_HOOK include/linux/netfilter.h:289 [inline]
ip6_input+0x2b6/0x350 net/ipv6/ip6_input.c:443
dst_input include/net/dst.h:450 [inline]
ip6_rcv_finish+0x4e7/0x6d0 net/ipv6/ip6_input.c:76
NF_HOOK include/linux/netfilter.h:289 [inline]
ipv6_rcv+0x34b/0x3f0 net/ipv6/ip6_input.c:272
__netif_receive_skb_one_core net/core/dev.c:4973 [inline]
__netif_receive_skb net/core/dev.c:5083 [inline]
process_backlog+0x756/0x10e0 net/core/dev.c:5923
napi_poll net/core/dev.c:6346 [inline]
net_rx_action+0x78b/0x1a60 net/core/dev.c:6412
__do_softirq+0x53f/0x93a kernel/softirq.c:293
do_softirq_own_stack+0x49/0x80 arch/x86/entry/entry_64.S:1039
</IRQ>
do_softirq kernel/softirq.c:338 [inline]
__local_bh_enable_ip+0x16f/0x1a0 kernel/softirq.c:190
local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32
rcu_read_unlock_bh include/linux/rcupdate.h:696 [inline]
ip6_finish_output2+0x1d64/0x25f0 net/ipv6/ip6_output.c:121
ip6_finish_output+0xae4/0xbc0 net/ipv6/ip6_output.c:154
NF_HOOK_COND include/linux/netfilter.h:278 [inline]
ip6_output+0x5ca/0x710 net/ipv6/ip6_output.c:171
dst_output include/net/dst.h:444 [inline]
ip6_local_out+0x164/0x1d0 net/ipv6/output_core.c:176
ip6_send_skb+0xfa/0x390 net/ipv6/ip6_output.c:1727
udp_v6_send_skb+0x1733/0x1d20 net/ipv6/udp.c:1169
udpv6_sendmsg+0x424e/0x45d0 net/ipv6/udp.c:1466
inet_sendmsg+0x54a/0x720 net/ipv4/af_inet.c:798
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116
__sys_sendmmsg+0x580/0xad0 net/socket.c:2211
__do_sys_sendmmsg net/socket.c:2240 [inline]
__se_sys_sendmmsg+0xbd/0xe0 net/socket.c:2237
__x64_sys_sendmmsg+0x56/0x70 net/socket.c:2237
do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x457ec9
Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f4a5204fc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000000457ec9
RDX: 00000000040001ab RSI: 0000000020000240 RDI: 0000000000000003
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4a520506d4
R13: 00000000004c4ce5 R14: 00000000004d85d8 R15: 00000000ffffffff
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:205 [inline]
kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:159
kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176
kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185
slab_post_alloc_hook mm/slab.h:446 [inline]
slab_alloc_node mm/slub.c:2754 [inline]
__kmalloc_node_track_caller+0xe9e/0xff0 mm/slub.c:4377
__kmalloc_reserve net/core/skbuff.c:140 [inline]
__alloc_skb+0x309/0xa20 net/core/skbuff.c:208
alloc_skb include/linux/skbuff.h:1012 [inline]
alloc_skb_with_frags+0x1c7/0xac0 net/core/skbuff.c:5288
sock_alloc_send_pskb+0xafd/0x10a0 net/core/sock.c:2091
sock_alloc_send_skb+0xca/0xe0 net/core/sock.c:2108
__ip6_append_data+0x42ed/0x5dc0 net/ipv6/ip6_output.c:1443
ip6_append_data+0x3c2/0x650 net/ipv6/ip6_output.c:1619
icmp6_send+0x2f5c/0x3c40 net/ipv6/icmp.c:574
icmpv6_send+0xe5/0x110 net/ipv6/ip6_icmp.c:43
ip6_link_failure+0x5c/0x2c0 net/ipv6/route.c:2231
dst_link_failure include/net/dst.h:427 [inline]
vti_xmit net/ipv4/ip_vti.c:229 [inline]
vti_tunnel_xmit+0xf3b/0x1ea0 net/ipv4/ip_vti.c:265
__netdev_start_xmit include/linux/netdevice.h:4382 [inline]
netdev_start_xmit include/linux/netdevice.h:4391 [inline]
xmit_one net/core/dev.c:3278 [inline]
dev_hard_start_xmit+0x604/0xc40 net/core/dev.c:3294
__dev_queue_xmit+0x2e48/0x3b80 net/core/dev.c:3864
dev_queue_xmit+0x4b/0x60 net/core/dev.c:3897
neigh_direct_output+0x42/0x50 net/core/neighbour.c:1511
neigh_output include/net/neighbour.h:508 [inline]
ip6_finish_output2+0x1d4e/0x25f0 net/ipv6/ip6_output.c:120
ip6_finish_output+0xae4/0xbc0 net/ipv6/ip6_output.c:154
NF_HOOK_COND include/linux/netfilter.h:278 [inline]
ip6_output+0x5ca/0x710 net/ipv6/ip6_output.c:171
dst_output include/net/dst.h:444 [inline]
ip6_local_out+0x164/0x1d0 net/ipv6/output_core.c:176
ip6_send_skb+0xfa/0x390 net/ipv6/ip6_output.c:1727
udp_v6_send_skb+0x1733/0x1d20 net/ipv6/udp.c:1169
udpv6_sendmsg+0x424e/0x45d0 net/ipv6/udp.c:1466
inet_sendmsg+0x54a/0x720 net/ipv4/af_inet.c:798
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116
__sys_sendmmsg+0x580/0xad0 net/socket.c:2211
__do_sys_sendmmsg net/socket.c:2240 [inline]
__se_sys_sendmmsg+0xbd/0xe0 net/socket.c:2237
__x64_sys_sendmmsg+0x56/0x70 net/socket.c:2237
do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
Fixes: b8a51b38e4d4 ("fou, fou6: ICMP error handlers for FoU and GUE")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Stefano Brivio <sbrivio@redhat.com>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TCP transmission with MSG_ZEROCOPY fails if the peer closes its end of
the connection and so transitions this socket to CLOSE_WAIT state.
Transmission in close wait state is acceptable. Other similar tests in
the stack (e.g., in FastOpen) accept both states. Relax this test, too.
Link: https://www.mail-archive.com/netdev@vger.kernel.org/msg276886.html
Link: https://www.mail-archive.com/netdev@vger.kernel.org/msg227390.html
Fixes: f214f915e7db ("tcp: enable MSG_ZEROCOPY")
Reported-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
CC: Yuchung Cheng <ycheng@google.com>
CC: Neal Cardwell <ncardwell@google.com>
CC: Soheil Hassas Yeganeh <soheil@google.com>
CC: Alexey Kodanev <alexey.kodanev@oracle.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IPv4 routing tables are flushed in two cases:
1. In response to events in the netdev and inetaddr notification chains
2. When a network namespace is being dismantled
In both cases only routes associated with a dead nexthop group are
flushed. However, a nexthop group will only be marked as dead in case it
is populated with actual nexthops using a nexthop device. This is not
the case when the route in question is an error route (e.g.,
'blackhole', 'unreachable').
Therefore, when a network namespace is being dismantled such routes are
not flushed and leaked [1].
To reproduce:
# ip netns add blue
# ip -n blue route add unreachable 192.0.2.0/24
# ip netns del blue
Fix this by not skipping error routes that are not marked with
RTNH_F_DEAD when flushing the routing tables.
To prevent the flushing of such routes in case #1, add a parameter to
fib_table_flush() that indicates if the table is flushed as part of
namespace dismantle or not.
Note that this problem does not exist in IPv6 since error routes are
associated with the loopback device.
[1]
unreferenced object 0xffff888066650338 (size 56):
comm "ip", pid 1206, jiffies 4294786063 (age 26.235s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 b0 1c 62 61 80 88 ff ff ..........ba....
e8 8b a1 64 80 88 ff ff 00 07 00 08 fe 00 00 00 ...d............
backtrace:
[<00000000856ed27d>] inet_rtm_newroute+0x129/0x220
[<00000000fcdfc00a>] rtnetlink_rcv_msg+0x397/0xa20
[<00000000cb85801a>] netlink_rcv_skb+0x132/0x380
[<00000000ebc991d2>] netlink_unicast+0x4c0/0x690
[<0000000014f62875>] netlink_sendmsg+0x929/0xe10
[<00000000bac9d967>] sock_sendmsg+0xc8/0x110
[<00000000223e6485>] ___sys_sendmsg+0x77a/0x8f0
[<000000002e94f880>] __sys_sendmsg+0xf7/0x250
[<00000000ccb1fa72>] do_syscall_64+0x14d/0x610
[<00000000ffbe3dae>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<000000003a8b605b>] 0xffffffffffffffff
unreferenced object 0xffff888061621c88 (size 48):
comm "ip", pid 1206, jiffies 4294786063 (age 26.235s)
hex dump (first 32 bytes):
6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
6b 6b 6b 6b 6b 6b 6b 6b d8 8e 26 5f 80 88 ff ff kkkkkkkk..&_....
backtrace:
[<00000000733609e3>] fib_table_insert+0x978/0x1500
[<00000000856ed27d>] inet_rtm_newroute+0x129/0x220
[<00000000fcdfc00a>] rtnetlink_rcv_msg+0x397/0xa20
[<00000000cb85801a>] netlink_rcv_skb+0x132/0x380
[<00000000ebc991d2>] netlink_unicast+0x4c0/0x690
[<0000000014f62875>] netlink_sendmsg+0x929/0xe10
[<00000000bac9d967>] sock_sendmsg+0xc8/0x110
[<00000000223e6485>] ___sys_sendmsg+0x77a/0x8f0
[<000000002e94f880>] __sys_sendmsg+0xf7/0x250
[<00000000ccb1fa72>] do_syscall_64+0x14d/0x610
[<00000000ffbe3dae>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<000000003a8b605b>] 0xffffffffffffffff
Fixes: 8cced9eff1d4 ("[NETNS]: Enable routing configuration in non-initial namespace.")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The bpfilter.ko module can be removed while functions of the bpfilter.ko
are executing. so panic can occurred. in order to protect that, locks can
be used. a bpfilter_lock protects routines in the
__bpfilter_process_sockopt() but it's not enough because __exit routine
can be executed concurrently.
Now, the bpfilter_umh can not run in parallel.
So, the module do not removed while it's being used and it do not
double-create UMH process.
The members of the umh_info and the bpfilter_umh_ops are protected by
the bpfilter_umh_ops.lock.
test commands:
while :
do
iptables -I FORWARD -m string --string ap --algo kmp &
modprobe -rv bpfilter &
done
splat looks like:
[ 298.623435] BUG: unable to handle kernel paging request at fffffbfff807440b
[ 298.628512] #PF error: [normal kernel read fault]
[ 298.633018] PGD 124327067 P4D 124327067 PUD 11c1a3067 PMD 119eb2067 PTE 0
[ 298.638859] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 298.638859] CPU: 0 PID: 2997 Comm: iptables Not tainted 4.20.0+ #154
[ 298.638859] RIP: 0010:__mutex_lock+0x6b9/0x16a0
[ 298.638859] Code: c0 00 00 e8 89 82 ff ff 80 bd 8f fc ff ff 00 0f 85 d9 05 00 00 48 8b 85 80 fc ff ff 48 bf 00 00 00 00 00 fc ff df 48 c1 e8 03 <80> 3c 38 00 0f 85 1d 0e 00 00 48 8b 85 c8 fc ff ff 49 39 47 58 c6
[ 298.638859] RSP: 0018:ffff88810e7777a0 EFLAGS: 00010202
[ 298.638859] RAX: 1ffffffff807440b RBX: ffff888111bd4d80 RCX: 0000000000000000
[ 298.638859] RDX: 1ffff110235ff806 RSI: ffff888111bd5538 RDI: dffffc0000000000
[ 298.638859] RBP: ffff88810e777b30 R08: 0000000080000002 R09: 0000000000000000
[ 298.638859] R10: 0000000000000000 R11: 0000000000000000 R12: fffffbfff168a42c
[ 298.638859] R13: ffff888111bd4d80 R14: ffff8881040e9a05 R15: ffffffffc03a2000
[ 298.638859] FS: 00007f39e3758700(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000
[ 298.638859] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 298.638859] CR2: fffffbfff807440b CR3: 000000011243e000 CR4: 00000000001006f0
[ 298.638859] Call Trace:
[ 298.638859] ? mutex_lock_io_nested+0x1560/0x1560
[ 298.638859] ? kasan_kmalloc+0xa0/0xd0
[ 298.638859] ? kmem_cache_alloc+0x1c2/0x260
[ 298.638859] ? __alloc_file+0x92/0x3c0
[ 298.638859] ? alloc_empty_file+0x43/0x120
[ 298.638859] ? alloc_file_pseudo+0x220/0x330
[ 298.638859] ? sock_alloc_file+0x39/0x160
[ 298.638859] ? __sys_socket+0x113/0x1d0
[ 298.638859] ? __x64_sys_socket+0x6f/0xb0
[ 298.638859] ? do_syscall_64+0x138/0x560
[ 298.638859] ? entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 298.638859] ? __alloc_file+0x92/0x3c0
[ 298.638859] ? init_object+0x6b/0x80
[ 298.638859] ? cyc2ns_read_end+0x10/0x10
[ 298.638859] ? cyc2ns_read_end+0x10/0x10
[ 298.638859] ? hlock_class+0x140/0x140
[ 298.638859] ? sched_clock_local+0xd4/0x140
[ 298.638859] ? sched_clock_local+0xd4/0x140
[ 298.638859] ? check_flags.part.37+0x440/0x440
[ 298.638859] ? __lock_acquire+0x4f90/0x4f90
[ 298.638859] ? set_rq_offline.part.89+0x140/0x140
[ ... ]
Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The bpfilter_umh will be stopped via __stop_umh() when the bpfilter
error occurred.
The bpfilter_umh() couldn't start again because there is no restart
routine.
The section of the bpfilter_umh_{start/end} is no longer .init.rodata
because these area should be reused in the restart routine. hence
the section name is changed to .bpfilter_umh.
The bpfilter_ops->start() is restart callback. it will be called when
bpfilter_umh is stopped.
The stop bit means bpfilter_umh is stopped. this bit is set by both
start and stop routine.
Before this patch,
Test commands:
$ iptables -vnL
$ kill -9 <pid of bpfilter_umh>
$ iptables -vnL
[ 480.045136] bpfilter: write fail -32
$ iptables -vnL
All iptables commands will fail.
After this patch,
Test commands:
$ iptables -vnL
$ kill -9 <pid of bpfilter_umh>
$ iptables -vnL
$ iptables -vnL
Now, all iptables commands will work.
Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now, UMH process is killed, do_exit() calls the umh_info->cleanup callback
to release members of the umh_info.
This patch makes bpfilter_umh's cleanup routine to use the
umh_info->cleanup callback.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Previously upon SYN timeouts the sender recomputes the txhash to
try a different path. However this does not apply on the initial
timeout of SYN-data (active Fast Open). Therefore an active IPv6
Fast Open connection may incur one second RTO penalty to take on
a new path after the second SYN retransmission uses a new flow label.
This patch removes this undesirable behavior so Fast Open changes
the flow label just like the regular connections. This also helps
avoid falsely disabling Fast Open on the sender which triggers
after two consecutive SYN timeouts on Fast Open.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 2efd4fca703a ("ip: in cmsg IP(V6)_ORIGDSTADDR call
pskb_may_pull") avoided a read beyond the end of the skb linear
segment by calling pskb_may_pull.
That function can trigger a BUG_ON in pskb_expand_head if the skb is
shared, which it is when when peeking. It can also return ENOMEM.
Avoid both by switching to safer skb_header_pointer.
Fixes: 2efd4fca703a ("ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull")
Reported-by: syzbot <syzkaller@googlegroups.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recently we run a network test over ipcomp virtual tunnel.We find that
if a ipv4 packet needs fragment, then the peer can't receive
it.
We deep into the code and find that when packet need fragment the smaller
fragment will be encapsulated by ipip not ipcomp. So when the ipip packet
goes into xfrm, it's skb->dev is not properly set. The ipv4 reassembly code
always set skb'dev to the last fragment's dev. After ipv4 defrag processing,
when the kernel rp_filter parameter is set, the skb will be drop by -EXDEV
error.
This patch adds compatible support for the ipip process in ipcomp virtual tunnel.
Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
In commit 11789039da53 ("fou: Prevent unbounded recursion in GUE error
handler"), I didn't take care of the case where UDP-Lite is encapsulated
into UDP or UDP-Lite with GUE. From a syzbot report about a possibly
similar issue with GUE on IPv6, I just realised the same thing might
happen with a UDP-Lite inner payload.
Also skip exception handling for inner UDP-Lite protocol.
Fixes: 11789039da53 ("fou: Prevent unbounded recursion in GUE error handler")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit fixes a regression in AF_INET/RTM_GETADDR and
AF_INET6/RTM_GETADDR.
Before this commit, the kernel would stop dumping addresses once the first
skb was full and end the stream with NLMSG_DONE(-EMSGSIZE). The error
shouldn't be sent back to netlink_dump so the callback is kept alive. The
userspace is expected to call back with a new empty skb.
Changes from V1:
- The error is not handled in netlink_dump anymore but rather in
inet_dump_ifaddr and inet6_dump_addr directly as suggested by
David Ahern.
Fixes: d7e38611b81e ("net/ipv4: Put target net when address dump fails due to bad attributes")
Fixes: 242afaa6968c ("net/ipv6: Put target net when address dump fails due to bad attributes")
Cc: David Ahern <dsahern@gmail.com>
Cc: "David S . Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Arthur Gautier <baloo@gandi.net>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
"Several fixes here. Basically split down the line between newly
introduced regressions and long existing problems:
1) Double free in tipc_enable_bearer(), from Cong Wang.
2) Many fixes to nf_conncount, from Florian Westphal.
3) op->get_regs_len() can throw an error, check it, from Yunsheng
Lin.
4) Need to use GFP_ATOMIC in *_add_hash_mac_address() of fsl/fman
driver, from Scott Wood.
5) Inifnite loop in fib_empty_table(), from Yue Haibing.
6) Use after free in ax25_fillin_cb(), from Cong Wang.
7) Fix socket locking in nr_find_socket(), also from Cong Wang.
8) Fix WoL wakeup enable in r8169, from Heiner Kallweit.
9) On 32-bit sock->sk_stamp is not thread-safe, from Deepa Dinamani.
10) Fix ptr_ring wrap during queue swap, from Cong Wang.
11) Missing shutdown callback in hinic driver, from Xue Chaojing.
12) Need to return NULL on error from ip6_neigh_lookup(), from Stefano
Brivio.
13) BPF out of bounds speculation fixes from Daniel Borkmann"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits)
ipv6: Consider sk_bound_dev_if when binding a socket to an address
ipv6: Fix dump of specific table with strict checking
bpf: add various test cases to selftests
bpf: prevent out of bounds speculation on pointer arithmetic
bpf: fix check_map_access smin_value test when pointer contains offset
bpf: restrict unknown scalars of mixed signed bounds for unprivileged
bpf: restrict stack pointer arithmetic for unprivileged
bpf: restrict map value pointer arithmetic for unprivileged
bpf: enable access to ax register also from verifier rewrite
bpf: move tmp variable into ax register in interpreter
bpf: move {prev_,}insn_idx into verifier env
isdn: fix kernel-infoleak in capi_unlocked_ioctl
ipv6: route: Fix return value of ip6_neigh_lookup() on neigh_create() error
net/hamradio/6pack: use mod_timer() to rearm timers
net-next/hinic:add shutdown callback
net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT
ip: validate header length on virtual device xmit
tap: call skb_probe_transport_header after setting skb->dev
ptr_ring: wrap back ->producer in __ptr_ring_swap_queue()
net: rds: remove unnecessary NULL check
...
|
|
KMSAN detected read beyond end of buffer in vti and sit devices when
passing truncated packets with PF_PACKET. The issue affects additional
ip tunnel devices.
Extend commit 76c0ddd8c3a6 ("ip6_tunnel: be careful when accessing the
inner header") and commit ccfec9e5cb2d ("ip_tunnel: be careful when
accessing the inner header").
Move the check to a separate helper and call at the start of each
ndo_start_xmit function in net/ipv4 and net/ipv6.
Minor changes:
- convert dev_kfree_skb to kfree_skb on error path,
as dev_kfree_skb calls consume_skb which is not for error paths.
- use pskb_network_may_pull even though that is pedantic here,
as the same as pskb_may_pull for devices without llheaders.
- do not cache ipv6 hdrs if used only once
(unsafe across pskb_may_pull, was more relevant to earlier patch)
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
gcc warn this:
net/ipv4/fib_rules.c:203 fib_empty_table() warn:
always true condition '(id <= 4294967295) => (0-u32max <= u32max)'
'id' is u32, which always not greater than RT_TABLE_MAX
(0xFFFFFFFF), So add a check to break while wrap around.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
totalram_pages and totalhigh_pages are made static inline function.
Main motivation was that managed_page_count_lock handling was complicating
things. It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes
better to remove the lock and convert variables to atomic, with preventing
poteintial store-to-read tearing as a bonus.
[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/1542090790-21750-4-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull in bug fixes before respinning my net-next pull
request.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Patch eedbbb0d98b2 "net: dccp: initialize (addr,port) ..."
added calling to inet_hashinfo2_init() from dccp_init().
However, inet_hashinfo2_init() is marked as __init(), and
thus the kernel panics when dccp is loaded as module. Removing
__init() tag from inet_hashinfo2_init() is not feasible because
it calls into __init functions in mm.
This patch adds inet_hashinfo2_init_mod() function that can
be called after the init phase is done; changes dccp_init() to
call the new function; un-marks inet_hashinfo2_init() as
exported.
Fixes: eedbbb0d98b2 ("net: dccp: initialize (addr,port) ...")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ip l add tun type gretap external
ip r a 10.0.0.2 encap ip id 1000 dst 172.168.0.2 key dev tun
ip a a 10.0.0.1/24 dev tun
The peer arp request to 10.0.0.1 with tunnel_id, but the arp reply
only set the tun_id but not the tun_flags with TUNNEL_KEY. The arp
reply packet don't contain tun_id field.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
Alexei reported use after frees in inet_diag_dump_icsk() [1]
Because we use refcount_set() when various sockets are setup and
inserted into ehash, we also need to make sure inet_diag_dump_icsk()
wont race with the refcount_set() operations.
Jonathan Lemon sent a patch changing net_twsk_hashdance() but
other spots would need risky changes.
Instead, fix inet_diag_dump_icsk() as this bug came with
linux-4.10 only.
[1] Quoting Alexei :
First something iterating over sockets finds already freed tw socket:
refcount_t: increment on 0; use-after-free.
WARNING: CPU: 2 PID: 2738 at lib/refcount.c:153 refcount_inc+0x26/0x30
RIP: 0010:refcount_inc+0x26/0x30
RSP: 0018:ffffc90004c8fbc0 EFLAGS: 00010282
RAX: 000000000000002b RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88085ee9d680 RSI: ffff88085ee954c8 RDI: ffff88085ee954c8
RBP: ffff88010ecbd2c0 R08: 0000000000000000 R09: 000000000000174c
R10: ffffffff81e7c5a0 R11: 0000000000000000 R12: 0000000000000000
R13: ffff8806ba9bf210 R14: ffffffff82304600 R15: ffff88010ecbd328
FS: 00007f81f5a7d700(0000) GS:ffff88085ee80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f81e2a95000 CR3: 000000069b2eb006 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
inet_diag_dump_icsk+0x2b3/0x4e0 [inet_diag] // sock_hold(sk); in net/ipv4/inet_diag.c:1002
? kmalloc_large_node+0x37/0x70
? __kmalloc_node_track_caller+0x1cb/0x260
? __alloc_skb+0x72/0x1b0
? __kmalloc_reserve.isra.40+0x2e/0x80
__inet_diag_dump+0x3b/0x80 [inet_diag]
netlink_dump+0x116/0x2a0
netlink_recvmsg+0x205/0x3c0
sock_read_iter+0x89/0xd0
__vfs_read+0xf7/0x140
vfs_read+0x8a/0x140
SyS_read+0x3f/0xa0
do_syscall_64+0x5a/0x100
then a minute later twsk timer fires and hits two bad refcnts
for this freed socket:
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 31 PID: 0 at lib/refcount.c:228 refcount_dec+0x2e/0x40
Modules linked in:
RIP: 0010:refcount_dec+0x2e/0x40
RSP: 0018:ffff88085f5c3ea8 EFLAGS: 00010296
RAX: 000000000000002c RBX: ffff88010ecbd2c0 RCX: 000000000000083f
RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000003f
RBP: ffffc90003c77280 R08: 0000000000000000 R09: 00000000000017d3
R10: ffffffff81e7c5a0 R11: 0000000000000000 R12: ffffffff82ad2d80
R13: ffffffff8182de00 R14: ffff88085f5c3ef8 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88085f5c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fbe42685250 CR3: 0000000002209001 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
inet_twsk_kill+0x9d/0xc0 // inet_twsk_bind_unhash(tw, hashinfo);
call_timer_fn+0x29/0x110
run_timer_softirq+0x36b/0x3a0
refcount_t: underflow; use-after-free.
WARNING: CPU: 31 PID: 0 at lib/refcount.c:187 refcount_sub_and_test+0x46/0x50
RIP: 0010:refcount_sub_and_test+0x46/0x50
RSP: 0018:ffff88085f5c3eb8 EFLAGS: 00010296
RAX: 0000000000000026 RBX: ffff88010ecbd2c0 RCX: 000000000000083f
RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000003f
RBP: ffff88010ecbd358 R08: 0000000000000000 R09: 000000000000185b
R10: ffffffff81e7c5a0 R11: 0000000000000000 R12: ffff88010ecbd358
R13: ffffffff8182de00 R14: ffff88085f5c3ef8 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88085f5c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fbe42685250 CR3: 0000000002209001 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
inet_twsk_put+0x12/0x20 // inet_twsk_put(tw);
call_timer_fn+0x29/0x110
run_timer_softirq+0x36b/0x3a0
Fixes: 67db3e4bfbc9 ("tcp: no longer hold ehash lock while calling tcp_get_info()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Alexei Starovoitov <ast@kernel.org>
Cc: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Support for destination MAC in ipset, from Stefano Brivio.
2) Disallow all-zeroes MAC address in ipset, also from Stefano.
3) Add IPSET_CMD_GET_BYNAME and IPSET_CMD_GET_BYINDEX commands,
introduce protocol version number 7, from Jozsef Kadlecsik.
A follow up patch to fix ip_set_byindex() is also included
in this batch.
4) Honor CTA_MARK_MASK from ctnetlink, from Andreas Jaggi.
5) Statify nf_flow_table_iterate(), from Taehee Yoo.
6) Use nf_flow_table_iterate() to simplify garbage collection in
nf_flow_table logic, also from Taehee Yoo.
7) Don't use _bh variants of call_rcu(), rcu_barrier() and
synchronize_rcu_bh() in Netfilter, from Paul E. McKenney.
8) Remove NFC_* cache definition from the old caching
infrastructure.
9) Remove layer 4 port rover in NAT helpers, use random port
instead, from Florian Westphal.
10) Use strscpy() in ipset, from Qian Cai.
11) Remove NF_NAT_RANGE_PROTO_RANDOM_FULLY branch now that
random port is allocated by default, from Xiaozhou Liu.
12) Ignore NF_NAT_RANGE_PROTO_RANDOM too, from Florian Westphal.
13) Limit port allocation selection routine in NAT to avoid
softlockup splats when most ports are in use, from Florian.
14) Remove unused parameters in nf_ct_l4proto_unregister_sysctl()
from Yafang Shao.
15) Direct call to nf_nat_l4proto_unique_tuple() instead of
indirection, from Florian Westphal.
16) Several patches to remove all layer 4 NAT indirections,
remove nf_nat_l4proto struct, from Florian Westphal.
17) Fix RTP/RTCP source port translation when SNAT is in place,
from Alin Nastac.
18) Selective rule dump per chain, from Phil Sutter.
19) Revisit CLUSTERIP target, this includes a deadlock fix from
netns path, sleep in atomic, remove bogus WARN_ON_ONCE()
and disallow mismatching IP address and MAC address.
Patchset from Taehee Yoo.
20) Update UDP timeout to stream after 2 seconds, from Florian.
21) Shrink UDP established timeout to 120 seconds like TCP timewait.
22) Sysctl knobs to set GRE timeouts, from Yafang Shao.
23) Move seq_print_acct() to conntrack core file, from Florian.
24) Add enum for conntrack sysctl knobs, also from Florian.
25) Place nf_conntrack_acct, nf_conntrack_helper, nf_conntrack_events
and nf_conntrack_timestamp knobs in the core, from Florian Westphal.
As a side effect, shrink netns_ct structure by removing obsolete
sysctl anchors, also from Florian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-12-21
The following pull-request contains BPF updates for your *net-next* tree.
There is a merge conflict in test_verifier.c. Result looks as follows:
[...]
},
{
"calls: cross frame pruning",
.insns = {
[...]
.prog_type = BPF_PROG_TYPE_SOCKET_FILTER,
.errstr_unpriv = "function calls to other bpf functions are allowed for root only",
.result_unpriv = REJECT,
.errstr = "!read_ok",
.result = REJECT,
},
{
"jset: functional",
.insns = {
[...]
{
"jset: unknown const compare not taken",
.insns = {
BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
BPF_FUNC_get_prandom_u32),
BPF_JMP_IMM(BPF_JSET, BPF_REG_0, 1, 1),
BPF_LDX_MEM(BPF_B, BPF_REG_8, BPF_REG_9, 0),
BPF_EXIT_INSN(),
},
.prog_type = BPF_PROG_TYPE_SOCKET_FILTER,
.errstr_unpriv = "!read_ok",
.result_unpriv = REJECT,
.errstr = "!read_ok",
.result = REJECT,
},
[...]
{
"jset: range",
.insns = {
[...]
},
.prog_type = BPF_PROG_TYPE_SOCKET_FILTER,
.result_unpriv = ACCEPT,
.result = ACCEPT,
},
The main changes are:
1) Various BTF related improvements in order to get line info
working. Meaning, verifier will now annotate the corresponding
BPF C code to the error log, from Martin and Yonghong.
2) Implement support for raw BPF tracepoints in modules, from Matt.
3) Add several improvements to verifier state logic, namely speeding
up stacksafe check, optimizations for stack state equivalence
test and safety checks for liveness analysis, from Alexei.
4) Teach verifier to make use of BPF_JSET instruction, add several
test cases to kselftests and remove nfp specific JSET optimization
now that verifier has awareness, from Jakub.
5) Improve BPF verifier's slot_type marking logic in order to
allow more stack slot sharing, from Jiong.
6) Add sk_msg->size member for context access and add set of fixes
and improvements to make sock_map with kTLS usable with openssl
based applications, from John.
7) Several cleanups and documentation updates in bpftool as well as
auto-mount of tracefs for "bpftool prog tracelog" command,
from Quentin.
8) Include sub-program tags from now on in bpf_prog_info in order to
have a reliable way for user space to get all tags of the program
e.g. needed for kallsyms correlation, from Song.
9) Add BTF annotations for cgroup_local_storage BPF maps and
implement bpf fs pretty print support, from Roman.
10) Fix bpftool in order to allow for cross-compilation, from Ivan.
11) Update of bpftool license to GPLv2-only + BSD-2-Clause in order
to be compatible with libbfd and allow for Debian packaging,
from Jakub.
12) Remove an obsolete prog->aux sanitation in dump and get rid of
version check for prog load, from Daniel.
13) Fix a memory leak in libbpf's line info handling, from Prashant.
14) Fix cpumap's frame alignment for build_skb() so that skb_shared_info
does not get unaligned, from Jesper.
15) Fix test_progs kselftest to work with older compilers which are less
smart in optimizing (and thus throwing build error), from Stanislav.
16) Cleanup and simplify AF_XDP socket teardown, from Björn.
17) Fix sk lookup in BPF kselftest's test_sock_addr with regards
to netns_id argument, from Andrey.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When user requests to resolve an output route, the kernel synthesizes
an skb where the relevant parameters (e.g., source address) are set. The
skb is then passed to ip_route_output_key_hash_rcu() which might call
into the flow dissector in case a multipath route was hit and a nexthop
needs to be selected based on the multipath hash.
Since both 'skb->dev' and 'skb->sk' are not set, a warning is triggered
in the flow dissector [1]. The warning is there to prevent codepaths
from silently falling back to the standard flow dissector instead of the
BPF one.
Therefore, instead of removing the warning, set 'skb->dev' to the
loopback device, as its not used for anything but resolving the correct
namespace.
[1]
WARNING: CPU: 1 PID: 24819 at net/core/flow_dissector.c:764 __skb_flow_dissect+0x314/0x16b0
...
RSP: 0018:ffffa0df41fdf650 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8bcded232000 RCX: 0000000000000000
RDX: ffffa0df41fdf7e0 RSI: ffffffff98e415a0 RDI: ffff8bcded232000
RBP: ffffa0df41fdf760 R08: 0000000000000000 R09: 0000000000000000
R10: ffffa0df41fdf7e8 R11: ffff8bcdf27a3000 R12: ffffffff98e415a0
R13: ffffa0df41fdf7e0 R14: ffffffff98dd2980 R15: ffffa0df41fdf7e0
FS: 00007f46f6897680(0000) GS:ffff8bcdf7a80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055933e95f9a0 CR3: 000000021e636000 CR4: 00000000001006e0
Call Trace:
fib_multipath_hash+0x28c/0x2d0
? fib_multipath_hash+0x28c/0x2d0
fib_select_path+0x241/0x32f
? __fib_lookup+0x6a/0xb0
ip_route_output_key_hash_rcu+0x650/0xa30
? __alloc_skb+0x9b/0x1d0
inet_rtm_getroute+0x3f7/0xb80
? __alloc_pages_nodemask+0x11c/0x2c0
rtnetlink_rcv_msg+0x1d9/0x2f0
? rtnl_calcit.isra.24+0x120/0x120
netlink_rcv_skb+0x54/0x130
rtnetlink_rcv+0x15/0x20
netlink_unicast+0x20a/0x2c0
netlink_sendmsg+0x2d1/0x3d0
sock_sendmsg+0x39/0x50
___sys_sendmsg+0x2a0/0x2f0
? filemap_map_pages+0x16b/0x360
? __handle_mm_fault+0x108e/0x13d0
__sys_sendmsg+0x63/0xa0
? __sys_sendmsg+0x63/0xa0
__x64_sys_sendmsg+0x1f/0x30
do_syscall_64+0x5a/0x120
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: d0e13a1488ad ("flow_dissector: lookup netns by skb->sk if skb->dev is NULL")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A sockmap program that redirects through a kTLS ULP enabled socket
will not work correctly because the ULP layer is skipped. This
fixes the behavior to call through the ULP layer on redirect to
ensure any operations required on the data stream at the ULP layer
continue to be applied.
To do this we add an internal flag MSG_SENDPAGE_NOPOLICY to avoid
calling the BPF layer on a redirected message. This is
required to avoid calling the BPF layer multiple times (possibly
recursively) which is not the current/expected behavior without
ULPs. In the future we may add a redirect flag if users _do_
want the policy applied again but this would need to work for both
ULP and non-ULP sockets and be opt-in to avoid breaking existing
programs.
Also to avoid polluting the flag space with an internal flag we
reuse the flag space overlapping MSG_SENDPAGE_NOPOLICY with
MSG_WAITFORONE. Here WAITFORONE is specific to recv path and
SENDPAGE_NOPOLICY is only used for sendpage hooks. The last thing
to verify is user space API is masked correctly to ensure the flag
can not be set by user. (Note this needs to be true regardless
because we have internal flags already in-use that user space
should not be able to set). But for completeness we have two UAPI
paths into sendpage, sendfile and splice.
In the sendfile case the function do_sendfile() zero's flags,
./fs/read_write.c:
static ssize_t do_sendfile(int out_fd, int in_fd, loff_t *ppos,
size_t count, loff_t max)
{
...
fl = 0;
#if 0
/*
* We need to debate whether we can enable this or not. The
* man page documents EAGAIN return for the output at least,
* and the application is arguably buggy if it doesn't expect
* EAGAIN on a non-blocking file descriptor.
*/
if (in.file->f_flags & O_NONBLOCK)
fl = SPLICE_F_NONBLOCK;
#endif
file_start_write(out.file);
retval = do_splice_direct(in.file, &pos, out.file, &out_pos, count, fl);
}
In the splice case the pipe_to_sendpage "actor" is used which
masks flags with SPLICE_F_MORE.
./fs/splice.c:
static int pipe_to_sendpage(struct pipe_inode_info *pipe,
struct pipe_buffer *buf, struct splice_desc *sd)
{
...
more = (sd->flags & SPLICE_F_MORE) ? MSG_MORE : 0;
...
}
Confirming what we expect that internal flags are in fact internal
to socket side.
Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
When a skb verdict program is in-use and either another BPF program
redirects to that socket or the new SK_PASS support is used the
data_ready callback does not wake up application. Instead because
the stream parser/verdict is using the sk data_ready callback we wake
up the stream parser/verdict block.
Fix this by adding a helper to check if the stream parser block is
enabled on the sk and if so call the saved pointer which is the
upper layers wake up function.
This fixes application stalls observed when an application is waiting
for data in a blocking read().
Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Lots of conflicts, by happily all cases of overlapping
changes, parallel adds, things of that nature.
Thanks to Stephen Rothwell, Saeed Mahameed, and others
for their guidance in these resolutions.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
skb_sec_path gains 'const' qualifier to avoid
xt_policy.c: 'skb_sec_path' discards 'const' qualifier from pointer target type
same reasoning as previous conversions: Won't need to touch these
spots anymore when skb->sp is removed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It can only return 0 (success) or -ENOMEM.
Change return value to a pointer to secpath struct.
This avoids direct access to skb->sp:
err = secpath_set(skb);
if (!err) ..
skb->sp-> ...
Becomes:
sp = secpath_set(skb)
if (!sp) ..
sp-> ..
This reduces noise in followup patch which is going to remove skb->sp.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds an optional extension infrastructure, with ispec (xfrm) and
bridge netfilter as first users.
objdiff shows no changes if kernel is built without xfrm and br_netfilter
support.
The third (planned future) user is Multipath TCP which is still
out-of-tree.
MPTCP needs to map logical mptcp sequence numbers to the tcp sequence
numbers used by individual subflows.
This DSS mapping is read/written from tcp option space on receive and
written to tcp option space on transmitted tcp packets that are part of
and MPTCP connection.
Extending skb_shared_info or adding a private data field to skb fclones
doesn't work for incoming skb, so a different DSS propagation method would
be required for the receive side.
mptcp has same requirements as secpath/bridge netfilter:
1. extension memory is released when the sk_buff is free'd.
2. data is shared after cloning an skb (clone inherits extension)
3. adding extension to an skb will COW the extension buffer if needed.
The "MPTCP upstreaming" effort adds SKB_EXT_MPTCP extension to store the
mapping for tx and rx processing.
Two new members are added to sk_buff:
1. 'active_extensions' byte (filling a hole), telling which extensions
are available for this skb.
This has two purposes.
a) avoids the need to initialize the pointer.
b) allows to "delete" an extension by clearing its bit
value in ->active_extensions.
While it would be possible to store the active_extensions byte
in the extension struct instead of sk_buff, there is one problem
with this:
When an extension has to be disabled, we can always clear the
bit in skb->active_extensions. But in case it would be stored in the
extension buffer itself, we might have to COW it first, if
we are dealing with a cloned skb. On kmalloc failure we would
be unable to turn an extension off.
2. extension pointer, located at the end of the sk_buff.
If the active_extensions byte is 0, the pointer is undefined,
it is not initialized on skb allocation.
This adds extra code to skb clone and free paths (to deal with
refcount/free of extension area) but this replaces similar code that
manages skb->nf_bridge and skb->sp structs in the followup patches of
the series.
It is possible to add support for extensions that are not preseved on
clones/copies.
To do this, it would be needed to define a bitmask of all extensions that
need copy/cow semantics, and change __skb_ext_copy() to check
->active_extensions & SKB_EXT_PRESERVE_ON_CLONE, then just set
->active_extensions to 0 on the new clone.
This isn't done here because all extensions that get added here
need the copy/cow semantics.
v2:
Allocate entire extension space using kmem_cache.
Upside is that this allows better tracking of used memory,
downside is that we will allocate more space than strictly needed in
most cases (its unlikely that all extensions are active/needed at same
time for same skb).
The allocated memory (except the small extension header) is not cleared,
so no additonal overhead aside from memory usage.
Avoid atomic_dec_and_test operation on skb_ext_put()
by using similar trick as kfree_skbmem() does with fclone_ref:
If recount is 1, there is no concurrent user and we can free right away.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This pointer is going to be removed soon, so use the existing helpers in
more places to avoid noise when the removal happens.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mfc_cache is not needed by ipmr_queue_xmit so drop it from the input
argument list.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SOF_TIMESTAMPING_OPT_ID is supported on TCP, UDP and RAW sockets.
But it was missing on RAW with IPPROTO_IP, PF_PACKET and CAN.
Add skb_setup_tx_timestamp that configures both tx_flags and tskey
for these paths that do not need corking or use bytestream keys.
Fixes: 09c2d251b707 ("net-timestamp: add key to disambiguate concurrent datagrams")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit d9fbc7f6431f "net: tcp: prefer listeners bound to an address"
removes port-only listener lookups. This caused segfaults in DCCP
lookups because DCCP did not initialize the (addr,port) hashtable.
This patch adds said initialization.
The only non-trivial issue here is the size of the new hashtable.
It seemed reasonable to make it match the size of the port-only
hashtable (= INET_LHTABLE_SIZE) that was used previously. Other
parameters to inet_hashinfo2_init() match those used in TCP.
V2 changes: marked inet_hashinfo2_init as an exported symbol
so that DCCP compiles when configured as a module.
Tested: syzcaller issues fixed; the second patch in the patchset
tests that DCCP lookups work correctly.
Fixes: d9fbc7f6431f "net: tcp: prefer listeners bound to an address"
Reported-by: syzcaller <syzkaller@googlegroups.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Handling exceptions for direct UDP encapsulation in GUE (that is,
UDP-in-UDP) leads to unbounded recursion in the GUE exception handler,
syzbot reported.
While draft-ietf-intarea-gue-06 doesn't explicitly forbid direct
encapsulation of UDP in GUE, it probably doesn't make sense to set up GUE
this way, and it's currently not even possible to configure this.
Skip exception handling if the GUE proto/ctype field is set to the UDP
protocol number. Should we need to handle exceptions for UDP-in-GUE one
day, we might need to either explicitly set a bound for recursion, or
implement a special iterative handling for these cases.
Reported-and-tested-by: syzbot+43f6755d1c2e62743468@syzkaller.appspotmail.com
Fixes: b8a51b38e4d4 ("fou, fou6: ICMP error handlers for FoU and GUE")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If same destination IP address config is already existing, that config is
just used. MAC address also should be same.
However, there is no MAC address checking routine.
So that MAC address checking routine is added.
test commands:
%iptables -A INPUT -p tcp -i lo -d 192.168.0.5 --dport 80 \
-j CLUSTERIP --new --hashmode sourceip \
--clustermac 01:00:5e:00:00:20 --total-nodes 2 --local-node 1
%iptables -A INPUT -p tcp -i lo -d 192.168.0.5 --dport 80 \
-j CLUSTERIP --new --hashmode sourceip \
--clustermac 01:00:5e:00:00:21 --total-nodes 2 --local-node 1
After this patch, above commands are disallowed.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
clusterip_config_entry_put()
A proc_remove() can sleep. so that it can't be inside of spin_lock.
Hence proc_remove() is moved to outside of spin_lock. and it also
adds mutex to sync create and remove of proc entry(config->pde).
test commands:
SHELL#1
%while :; do iptables -A INPUT -p udp -i enp2s0 -d 192.168.1.100 \
--dport 9000 -j CLUSTERIP --new --hashmode sourceip \
--clustermac 01:00:5e:00:00:21 --total-nodes 3 --local-node 3; \
iptables -F; done
SHELL#2
%while :; do echo +1 > /proc/net/ipt_CLUSTERIP/192.168.1.100; \
echo -1 > /proc/net/ipt_CLUSTERIP/192.168.1.100; done
[ 2949.569864] BUG: sleeping function called from invalid context at kernel/sched/completion.c:99
[ 2949.579944] in_atomic(): 1, irqs_disabled(): 0, pid: 5472, name: iptables
[ 2949.587920] 1 lock held by iptables/5472:
[ 2949.592711] #0: 000000008f0ebcf2 (&(&cn->lock)->rlock){+...}, at: refcount_dec_and_lock+0x24/0x50
[ 2949.603307] CPU: 1 PID: 5472 Comm: iptables Tainted: G W 4.19.0-rc5+ #16
[ 2949.604212] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015
[ 2949.604212] Call Trace:
[ 2949.604212] dump_stack+0xc9/0x16b
[ 2949.604212] ? show_regs_print_info+0x5/0x5
[ 2949.604212] ___might_sleep+0x2eb/0x420
[ 2949.604212] ? set_rq_offline.part.87+0x140/0x140
[ 2949.604212] ? _rcu_barrier_trace+0x400/0x400
[ 2949.604212] wait_for_completion+0x94/0x710
[ 2949.604212] ? wait_for_completion_interruptible+0x780/0x780
[ 2949.604212] ? __kernel_text_address+0xe/0x30
[ 2949.604212] ? __lockdep_init_map+0x10e/0x5c0
[ 2949.604212] ? __lockdep_init_map+0x10e/0x5c0
[ 2949.604212] ? __init_waitqueue_head+0x86/0x130
[ 2949.604212] ? init_wait_entry+0x1a0/0x1a0
[ 2949.604212] proc_entry_rundown+0x208/0x270
[ 2949.604212] ? proc_reg_get_unmapped_area+0x370/0x370
[ 2949.604212] ? __lock_acquire+0x4500/0x4500
[ 2949.604212] ? complete+0x18/0x70
[ 2949.604212] remove_proc_subtree+0x143/0x2a0
[ 2949.708655] ? remove_proc_entry+0x390/0x390
[ 2949.708655] clusterip_tg_destroy+0x27a/0x630 [ipt_CLUSTERIP]
[ ... ]
Fixes: b3e456fce9f5 ("netfilter: ipt_CLUSTERIP: fix a race condition of proc file creation")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When network namespace is destroyed, both clusterip_tg_destroy() and
clusterip_net_exit() are called. and clusterip_net_exit() is called
before clusterip_tg_destroy().
Hence cleanup check code in clusterip_net_exit() doesn't make sense.
test commands:
%ip netns add vm1
%ip netns exec vm1 bash
%ip link set lo up
%iptables -A INPUT -p tcp -i lo -d 192.168.0.5 --dport 80 \
-j CLUSTERIP --new --hashmode sourceip \
--clustermac 01:00:5e:00:00:20 --total-nodes 2 --local-node 1
%exit
%ip netns del vm1
splat looks like:
[ 341.184508] WARNING: CPU: 1 PID: 87 at net/ipv4/netfilter/ipt_CLUSTERIP.c:840 clusterip_net_exit+0x319/0x380 [ipt_CLUSTERIP]
[ 341.184850] Modules linked in: ipt_CLUSTERIP nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_tcpudp iptable_filter bpfilter ip_tables x_tables
[ 341.184850] CPU: 1 PID: 87 Comm: kworker/u4:2 Not tainted 4.19.0-rc5+ #16
[ 341.227509] Workqueue: netns cleanup_net
[ 341.227509] RIP: 0010:clusterip_net_exit+0x319/0x380 [ipt_CLUSTERIP]
[ 341.227509] Code: 0f 85 7f fe ff ff 48 c7 c2 80 64 2c c0 be a8 02 00 00 48 c7 c7 a0 63 2c c0 c6 05 18 6e 00 00 01 e8 bc 38 ff f5 e9 5b fe ff ff <0f> 0b e9 33 ff ff ff e8 4b 90 50 f6 e9 2d fe ff ff 48 89 df e8 de
[ 341.227509] RSP: 0018:ffff88011086f408 EFLAGS: 00010202
[ 341.227509] RAX: dffffc0000000000 RBX: 1ffff1002210de85 RCX: 0000000000000000
[ 341.227509] RDX: 1ffff1002210de85 RSI: ffff880110813be8 RDI: ffffed002210de58
[ 341.227509] RBP: ffff88011086f4d0 R08: 0000000000000000 R09: 0000000000000000
[ 341.227509] R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff1002210de81
[ 341.227509] R13: ffff880110625a48 R14: ffff880114cec8c8 R15: 0000000000000014
[ 341.227509] FS: 0000000000000000(0000) GS:ffff880116600000(0000) knlGS:0000000000000000
[ 341.227509] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 341.227509] CR2: 00007f11fd38e000 CR3: 000000013ca16000 CR4: 00000000001006e0
[ 341.227509] Call Trace:
[ 341.227509] ? __clusterip_config_find+0x460/0x460 [ipt_CLUSTERIP]
[ 341.227509] ? default_device_exit+0x1ca/0x270
[ 341.227509] ? remove_proc_entry+0x1cd/0x390
[ 341.227509] ? dev_change_net_namespace+0xd00/0xd00
[ 341.227509] ? __init_waitqueue_head+0x130/0x130
[ 341.227509] ops_exit_list.isra.10+0x94/0x140
[ 341.227509] cleanup_net+0x45b/0x900
[ ... ]
Fixes: 613d0776d3fe ("netfilter: exit_net cleanup check added")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When network namespace is destroyed, cleanup_net() is called.
cleanup_net() holds pernet_ops_rwsem then calls each ->exit callback.
So that clusterip_tg_destroy() is called by cleanup_net().
And clusterip_tg_destroy() calls unregister_netdevice_notifier().
But both cleanup_net() and clusterip_tg_destroy() hold same
lock(pernet_ops_rwsem). hence deadlock occurrs.
After this patch, only 1 notifier is registered when module is inserted.
And all of configs are added to per-net list.
test commands:
%ip netns add vm1
%ip netns exec vm1 bash
%ip link set lo up
%iptables -A INPUT -p tcp -i lo -d 192.168.0.5 --dport 80 \
-j CLUSTERIP --new --hashmode sourceip \
--clustermac 01:00:5e:00:00:20 --total-nodes 2 --local-node 1
%exit
%ip netns del vm1
splat looks like:
[ 341.809674] ============================================
[ 341.809674] WARNING: possible recursive locking detected
[ 341.809674] 4.19.0-rc5+ #16 Tainted: G W
[ 341.809674] --------------------------------------------
[ 341.809674] kworker/u4:2/87 is trying to acquire lock:
[ 341.809674] 000000005da2d519 (pernet_ops_rwsem){++++}, at: unregister_netdevice_notifier+0x8c/0x460
[ 341.809674]
[ 341.809674] but task is already holding lock:
[ 341.809674] 000000005da2d519 (pernet_ops_rwsem){++++}, at: cleanup_net+0x119/0x900
[ 341.809674]
[ 341.809674] other info that might help us debug this:
[ 341.809674] Possible unsafe locking scenario:
[ 341.809674]
[ 341.809674] CPU0
[ 341.809674] ----
[ 341.809674] lock(pernet_ops_rwsem);
[ 341.809674] lock(pernet_ops_rwsem);
[ 341.809674]
[ 341.809674] *** DEADLOCK ***
[ 341.809674]
[ 341.809674] May be due to missing lock nesting notation
[ 341.809674]
[ 341.809674] 3 locks held by kworker/u4:2/87:
[ 341.809674] #0: 00000000d9df6c92 ((wq_completion)"%s""netns"){+.+.}, at: process_one_work+0xafe/0x1de0
[ 341.809674] #1: 00000000c2cbcee2 (net_cleanup_work){+.+.}, at: process_one_work+0xb60/0x1de0
[ 341.809674] #2: 000000005da2d519 (pernet_ops_rwsem){++++}, at: cleanup_net+0x119/0x900
[ 341.809674]
[ 341.809674] stack backtrace:
[ 341.809674] CPU: 1 PID: 87 Comm: kworker/u4:2 Tainted: G W 4.19.0-rc5+ #16
[ 341.809674] Workqueue: netns cleanup_net
[ 341.809674] Call Trace:
[ ... ]
[ 342.070196] down_write+0x93/0x160
[ 342.070196] ? unregister_netdevice_notifier+0x8c/0x460
[ 342.070196] ? down_read+0x1e0/0x1e0
[ 342.070196] ? sched_clock_cpu+0x126/0x170
[ 342.070196] ? find_held_lock+0x39/0x1c0
[ 342.070196] unregister_netdevice_notifier+0x8c/0x460
[ 342.070196] ? register_netdevice_notifier+0x790/0x790
[ 342.070196] ? __local_bh_enable_ip+0xe9/0x1b0
[ 342.070196] ? __local_bh_enable_ip+0xe9/0x1b0
[ 342.070196] ? clusterip_tg_destroy+0x372/0x650 [ipt_CLUSTERIP]
[ 342.070196] ? trace_hardirqs_on+0x93/0x210
[ 342.070196] ? __bpf_trace_preemptirq_template+0x10/0x10
[ 342.070196] ? clusterip_tg_destroy+0x372/0x650 [ipt_CLUSTERIP]
[ 342.123094] clusterip_tg_destroy+0x3ad/0x650 [ipt_CLUSTERIP]
[ 342.123094] ? clusterip_net_init+0x3d0/0x3d0 [ipt_CLUSTERIP]
[ 342.123094] ? cleanup_match+0x17d/0x200 [ip_tables]
[ 342.123094] ? xt_unregister_table+0x215/0x300 [x_tables]
[ 342.123094] ? kfree+0xe2/0x2a0
[ 342.123094] cleanup_entry+0x1d5/0x2f0 [ip_tables]
[ 342.123094] ? cleanup_match+0x200/0x200 [ip_tables]
[ 342.123094] __ipt_unregister_table+0x9b/0x1a0 [ip_tables]
[ 342.123094] iptable_filter_net_exit+0x43/0x80 [iptable_filter]
[ 342.123094] ops_exit_list.isra.10+0x94/0x140
[ 342.123094] cleanup_net+0x45b/0x900
[ ... ]
Fixes: 202f59afd441 ("netfilter: ipt_CLUSTERIP: do not hold dev")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This removes the (now empty) nf_nat_l4proto struct, all its instances
and all the no longer needed runtime (un)register functionality.
nf_nat_need_gre() can be axed as well: the module that calls it (to
load the no-longer-existing nat_gre module) also calls other nat core
functions. GRE nat is now always available if kernel is built with it.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This removes the last l4proto indirection, the two callers, the l3proto
packet mangling helpers for ipv4 and ipv6, now call the
nf_nat_l4proto_manip_pkt() helper.
nf_nat_proto_{dccp,tcp,sctp,gre,icmp,icmpv6} are left behind, even though
they contain no functionality anymore to not clutter this patch.
Next patch will remove the empty files and the nf_nat_l4proto
struct.
nf_nat_proto_udp.c is renamed to nf_nat_proto.c, as it now contains the
other nat manip functionality as well, not just udp and udplite.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
