summaryrefslogtreecommitdiff
path: root/net/ipv4
AgeCommit message (Collapse)AuthorFilesLines
2017-11-10tcp: fix tcp_fastretrans_alert warningYuchung Cheng1-2/+1
This patch fixes the cause of an WARNING indicatng TCP has pending retransmission in Open state in tcp_fastretrans_alert(). The root cause is a bad interaction between path mtu probing, if enabled, and the RACK loss detection. Upong receiving a SACK above the sequence of the MTU probing packet, RACK could mark the probe packet lost in tcp_fastretrans_alert(), prior to calling tcp_simple_retransmit(). tcp_simple_retransmit() only enters Loss state if it newly marks the probe packet lost. If the probe packet is already identified as lost by RACK, the sender remains in Open state with some packets marked lost and retransmitted. Then the next SACK would trigger the warning. The likely scenario is that the probe packet was lost due to its size or network congestion. The actual impact of this warning is small by potentially entering fast recovery an ACK later. The simple fix is always entering recovery (Loss) state if some packet is marked lost during path MTU probing. Fixes: a0370b3f3f2c ("tcp: enable RACK loss detection to trigger recovery") Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Reported-by: Roman Gushchin <guro@fb.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10tcp: gso: avoid refcount_t warning from tcp_gso_segment()Eric Dumazet1-2/+10
When a GSO skb of truesize O is segmented into 2 new skbs of truesize N1 and N2, we want to transfer socket ownership to the new fresh skbs. In order to avoid expensive atomic operations on a cache line subject to cache bouncing, we replace the sequence : refcount_add(N1, &sk->sk_wmem_alloc); refcount_add(N2, &sk->sk_wmem_alloc); // repeated by number of segments refcount_sub(O, &sk->sk_wmem_alloc); by a single refcount_add(sum_of(N) - O, &sk->sk_wmem_alloc); Problem is : In some pathological cases, sum(N) - O might be a negative number, and syzkaller bot was apparently able to trigger this trace [1] atomic_t was ok with this construct, but we need to take care of the negative delta with refcount_t [1] refcount_t: saturated; leaking memory. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 8404 at lib/refcount.c:77 refcount_add_not_zero+0x198/0x200 lib/refcount.c:77 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 8404 Comm: syz-executor2 Not tainted 4.14.0-rc5-mm1+ #20 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x41c kernel/panic.c:183 __warn+0x1c4/0x1e0 kernel/panic.c:546 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:177 do_trap_no_signal arch/x86/kernel/traps.c:211 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:260 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:297 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:310 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905 RIP: 0010:refcount_add_not_zero+0x198/0x200 lib/refcount.c:77 RSP: 0018:ffff8801c606e3a0 EFLAGS: 00010282 RAX: 0000000000000026 RBX: 0000000000001401 RCX: 0000000000000000 RDX: 0000000000000026 RSI: ffffc900036fc000 RDI: ffffed0038c0dc68 RBP: ffff8801c606e430 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8801d97f5eba R11: 0000000000000000 R12: ffff8801d5acf73c R13: 1ffff10038c0dc75 R14: 00000000ffffffff R15: 00000000fffff72f refcount_add+0x1b/0x60 lib/refcount.c:101 tcp_gso_segment+0x10d0/0x16b0 net/ipv4/tcp_offload.c:155 tcp4_gso_segment+0xd4/0x310 net/ipv4/tcp_offload.c:51 inet_gso_segment+0x60c/0x11c0 net/ipv4/af_inet.c:1271 skb_mac_gso_segment+0x33f/0x660 net/core/dev.c:2749 __skb_gso_segment+0x35f/0x7f0 net/core/dev.c:2821 skb_gso_segment include/linux/netdevice.h:3971 [inline] validate_xmit_skb+0x4ba/0xb20 net/core/dev.c:3074 __dev_queue_xmit+0xe49/0x2070 net/core/dev.c:3497 dev_queue_xmit+0x17/0x20 net/core/dev.c:3538 neigh_hh_output include/net/neighbour.h:471 [inline] neigh_output include/net/neighbour.h:479 [inline] ip_finish_output2+0xece/0x1460 net/ipv4/ip_output.c:229 ip_finish_output+0x85e/0xd10 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:238 [inline] ip_output+0x1cc/0x860 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:459 [inline] ip_local_out+0x95/0x160 net/ipv4/ip_output.c:124 ip_queue_xmit+0x8c6/0x18e0 net/ipv4/ip_output.c:504 tcp_transmit_skb+0x1ab7/0x3840 net/ipv4/tcp_output.c:1137 tcp_write_xmit+0x663/0x4de0 net/ipv4/tcp_output.c:2341 __tcp_push_pending_frames+0xa0/0x250 net/ipv4/tcp_output.c:2513 tcp_push_pending_frames include/net/tcp.h:1722 [inline] tcp_data_snd_check net/ipv4/tcp_input.c:5050 [inline] tcp_rcv_established+0x8c7/0x18a0 net/ipv4/tcp_input.c:5497 tcp_v4_do_rcv+0x2ab/0x7d0 net/ipv4/tcp_ipv4.c:1460 sk_backlog_rcv include/net/sock.h:909 [inline] __release_sock+0x124/0x360 net/core/sock.c:2264 release_sock+0xa4/0x2a0 net/core/sock.c:2776 tcp_sendmsg+0x3a/0x50 net/ipv4/tcp.c:1462 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:763 sock_sendmsg_nosec net/socket.c:632 [inline] sock_sendmsg+0xca/0x110 net/socket.c:642 ___sys_sendmsg+0x31c/0x890 net/socket.c:2048 __sys_sendmmsg+0x1e6/0x5f0 net/socket.c:2138 Fixes: 14afee4b6092 ("net: convert sock.sk_wmem_alloc from atomic_t to refcount_t") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-05tcp: fix DSACK-based undo on non-duplicate ACKPriyaranjan Jha1-1/+1
Fixes DSACK-based undo when sender is in Open State and an ACK advances snd_una. Example scenario: - Sender goes into recovery and makes some spurious rtx. - It comes out of recovery and enters into open state. - It sends some more packets, let's say 4. - The receiver sends an ACK for the first two, but this ACK is lost. - The sender receives ack for first two, and DSACK for previous spurious rtx. Signed-off-by: Priyaranjan Jha <priyarjha@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yousuk Seung <ysseung@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds4-14/+15
Pull networking fixes from David Miller: "Hopefully this is the last batch of networking fixes for 4.14 Fingers crossed... 1) Fix stmmac to use the proper sized OF property read, from Bhadram Varka. 2) Fix use after free in net scheduler tc action code, from Cong Wang. 3) Fix SKB control block mangling in tcp_make_synack(). 4) Use proper locking in fib_dump_info(), from Florian Westphal. 5) Fix IPG encodings in systemport driver, from Florian Fainelli. 6) Fix division by zero in NV TCP congestion control module, from Konstantin Khlebnikov. 7) Fix use after free in nf_reject_ipv4, from Tejaswi Tanikella" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: systemport: Correct IPG length settings tcp: do not mangle skb->cb[] in tcp_make_synack() fib: fib_dump_info can no longer use __in_dev_get_rtnl stmmac: use of_property_read_u32 instead of read_u8 net_sched: hold netns refcnt for each action net_sched: acquire RTNL in tc_action_net_exit() net: vrf: correct FRA_L3MDEV encode type tcp_nv: fix division by zero in tcpnv_acked() netfilter: nf_reject_ipv4: Fix use-after-free in send_reset netfilter: nft_set_hash: disable fast_ops for 2-len keys
2017-11-03tcp: do not mangle skb->cb[] in tcp_make_synack()Eric Dumazet1-7/+2
Christoph Paasch sent a patch to address the following issue : tcp_make_synack() is leaving some TCP private info in skb->cb[], then send the packet by other means than tcp_transmit_skb() tcp_transmit_skb() makes sure to clear skb->cb[] to not confuse IPv4/IPV6 stacks, but we have no such cleanup for SYNACK. tcp_make_synack() should not use tcp_init_nondata_skb() : tcp_init_nondata_skb() really should be limited to skbs put in write/rtx queues (the ones that are only sent via tcp_transmit_skb()) This patch fixes the issue and should even save few cpu cycles ;) Fixes: 971f10eca186 ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03fib: fib_dump_info can no longer use __in_dev_get_rtnlFlorian Westphal1-6/+10
syzbot reported yet another regression added with DOIT_UNLOCKED. When nexthop is marked as dead, fib_dump_info uses __in_dev_get_rtnl(): ./include/linux/inetdevice.h:230 suspicious rcu_dereference_protected() usage! rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz-executor2/23859: #0: (rcu_read_lock){....}, at: [<ffffffff840283f0>] inet_rtm_getroute+0xaa0/0x2d70 net/ipv4/route.c:2738 [..] lockdep_rcu_suspicious+0x123/0x170 kernel/locking/lockdep.c:4665 __in_dev_get_rtnl include/linux/inetdevice.h:230 [inline] fib_dump_info+0x1136/0x13d0 net/ipv4/fib_semantics.c:1377 inet_rtm_getroute+0xf97/0x2d70 net/ipv4/route.c:2785 .. This isn't safe anymore, callers either hold RTNL mutex or rcu read lock, so these spots must use rcu_dereference_rtnl() or plain rcu_derefence() (plus unconditional rcu read lock). This does the latter. Fixes: 394f51abb3d04f ("ipv4: route: set ipv4 RTM_GETROUTE to not use rtnl") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02Merge tag 'spdx_identifiers-4.14-rc8' of ↵Linus Torvalds19-0/+19
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman19-0/+19
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller1-0/+2
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains two one-liner fixes for your net tree, they are: 1) Disable fast hash operations for 2-bytes length keys which is leading to incorrect lookups in nf_tables, from Anatole Denis. 2) Reload pointer ipv4 header after ip_route_me_harder() given this may result in use-after-free due to skbuff header reallocation, patch from Tejaswi Tanikella. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02tcp_nv: fix division by zero in tcpnv_acked()Konstantin Khlebnikov1-1/+1
Average RTT could become zero. This happened in real life at least twice. This patch treats zero as 1us. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Lawrence Brakmo <Brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01tcp: fix tcp_mtu_probe() vs highest_sackEric Dumazet1-1/+2
Based on SNMP values provided by Roman, Yuchung made the observation that some crashes in tcp_sacktag_walk() might be caused by MTU probing. Looking at tcp_mtu_probe(), I found that when a new skb was placed in front of the write queue, we were not updating tcp highest sack. If one skb is freed because all its content was copied to the new skb (for MTU probing), then tp->highest_sack could point to a now freed skb. Bad things would then happen, including infinite loops. This patch renames tcp_highest_sack_combine() and uses it from tcp_mtu_probe() to fix the bug. Note that I also removed one test against tp->sacked_out, since we want to replace tp->highest_sack regardless of whatever condition, since keeping a stale pointer to freed skb is a recipe for disaster. Fixes: a47e5a988a57 ("[TCP]: Convert highest_sack to sk_buff to allow direct access") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Reported-by: Roman Gushchin <guro@fb.com> Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01netfilter: nf_reject_ipv4: Fix use-after-free in send_resetTejaswi Tanikella1-0/+2
niph is not updated after pskb_expand_head changes the skb head. It still points to the freed data, which is then used to update tot_len and checksum. This could cause use-after-free poison crash. Update niph, if ip_route_me_harder does not fail. This only affects the interaction with REJECT targets and br_netfilter. Signed-off-by: Tejaswi Tanikella <tejaswit@codeaurora.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-10-28tcp: refresh tp timestamp before tcp_mtu_probe()Eric Dumazet1-1/+1
In the unlikely event tcp_mtu_probe() is sending a packet, we want tp->tcp_mstamp being as accurate as possible. This means we need to call tcp_mstamp_refresh() a bit earlier in tcp_write_xmit(). Fixes: 385e20706fac ("tcp: use tp->tcp_mstamp in output path") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-27ipip: only increase err_count for some certain type icmp in ipip_errXin Long1-17/+42
t->err_count is used to count the link failure on tunnel and an err will be reported to user socket in tx path if t->err_count is not 0. udp socket could even return EHOSTUNREACH to users. Since commit fd58156e456d ("IPIP: Use ip-tunneling code.") removed the 'switch check' for icmp type in ipip_err(), err_count would be increased by the icmp packet with ICMP_EXC_FRAGTIME code. an link failure would be reported out due to this. In Jianlin's case, when receiving ICMP_EXC_FRAGTIME a icmp packet, udp netperf failed with the err: send_data: data send error: No route to host (errno 113) We expect this error reported from tunnel to socket when receiving some certain type icmp, but not ICMP_EXC_FRAGTIME, ICMP_SR_FAILED or ICMP_PARAMETERPROB ones. This patch is to bring 'switch check' for icmp type back to ipip_err so that it only reports link failure for the right type icmp, just as in ipgre_err() and ipip6_err(). Fixes: fd58156e456d ("IPIP: Use ip-tunneling code.") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-26tcp: call tcp_rate_skb_sent() when retransmit with unaligned skb->dataYousuk Seung1-1/+3
Current implementation calls tcp_rate_skb_sent() when tcp_transmit_skb() is called when it clones skb only. Not calling tcp_rate_skb_sent() is OK for all such code paths except from __tcp_retransmit_skb() which happens when skb->data address is not aligned. This may rarely happen e.g. when small amount of data is sent initially and the receiver partially acks odd number of bytes for some reason, possibly malicious. Signed-off-by: Yousuk Seung <ysseung@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-26tcp/dccp: fix other lockdep splats accessing ireq_optEric Dumazet2-3/+3
In my first attempt to fix the lockdep splat, I forgot we could enter inet_csk_route_req() with a freshly allocated request socket, for which refcount has not yet been elevated, due to complex SLAB_TYPESAFE_BY_RCU rules. We either are in rcu_read_lock() section _or_ we own a refcount on the request. Correct RCU verb to use here is rcu_dereference_check(), although it is not possible to prove we actually own a reference on a shared refcount :/ In v2, I added ireq_opt_deref() helper and use in three places, to fix other possible splats. [ 49.844590] lockdep_rcu_suspicious+0xea/0xf3 [ 49.846487] inet_csk_route_req+0x53/0x14d [ 49.848334] tcp_v4_route_req+0xe/0x10 [ 49.850174] tcp_conn_request+0x31c/0x6a0 [ 49.851992] ? __lock_acquire+0x614/0x822 [ 49.854015] tcp_v4_conn_request+0x5a/0x79 [ 49.855957] ? tcp_v4_conn_request+0x5a/0x79 [ 49.858052] tcp_rcv_state_process+0x98/0xdcc [ 49.859990] ? sk_filter_trim_cap+0x2f6/0x307 [ 49.862085] tcp_v4_do_rcv+0xfc/0x145 [ 49.864055] ? tcp_v4_do_rcv+0xfc/0x145 [ 49.866173] tcp_v4_rcv+0x5ab/0xaf9 [ 49.868029] ip_local_deliver_finish+0x1af/0x2e7 [ 49.870064] ip_local_deliver+0x1b2/0x1c5 [ 49.871775] ? inet_del_offload+0x45/0x45 [ 49.873916] ip_rcv_finish+0x3f7/0x471 [ 49.875476] ip_rcv+0x3f1/0x42f [ 49.876991] ? ip_local_deliver_finish+0x2e7/0x2e7 [ 49.878791] __netif_receive_skb_core+0x6d3/0x950 [ 49.880701] ? process_backlog+0x7e/0x216 [ 49.882589] __netif_receive_skb+0x1d/0x5e [ 49.884122] process_backlog+0x10c/0x216 [ 49.885812] net_rx_action+0x147/0x3df Fixes: a6ca7abe53633 ("tcp/dccp: fix lockdep splat in inet_csk_route_req()") Fixes: c92e8c02fe66 ("tcp/dccp: fix ireq->opt races") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: kernel test robot <fengguang.wu@intel.com> Reported-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-23tcp/dccp: fix lockdep splat in inet_csk_route_req()Eric Dumazet1-1/+2
This patch fixes the following lockdep splat in inet_csk_route_req() lockdep_rcu_suspicious inet_csk_route_req tcp_v4_send_synack tcp_rtx_synack inet_rtx_syn_ack tcp_fastopen_synack_time tcp_retransmit_timer tcp_write_timer_handler tcp_write_timer call_timer_fn Thread running inet_csk_route_req() owns a reference on the request socket, so we have the guarantee ireq->ireq_opt wont be changed or freed. lockdep can enforce this invariant for us. Fixes: c92e8c02fe66 ("tcp/dccp: fix ireq->opt races") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-23tcp: do tcp_mstamp_refresh before retransmits on TSQ handlerKoichiro Den1-1/+3
When retransmission on TSQ handler was introduced in the commit f9616c35a0d7 ("tcp: implement TSQ for retransmits"), the retransmitted skbs' timestamps were updated on the actual transmission. In the later commit 385e20706fac ("tcp: use tp->tcp_mstamp in output path"), it stops being done so. In the commit, the comment says "We try to refresh tp->tcp_mstamp only when necessary", and at present tcp_tsq_handler and tcp_v4_mtu_reduced applies to this. About the latter, it's okay since it's rare enough. About the former, even though possible retransmissions on the tasklet comes just after the destructor run in NET_RX softirq handling, the time between them could be nonnegligibly large to the extent that tcp_rack_advance or rto rearming be affected if other (remaining) RX, BLOCK and (preceding) TASKLET sofirq handlings are unexpectedly heavy. So in the same way as tcp_write_timer_handler does, doing tcp_mstamp_refresh ensures the accuracy of algorithms relying on it. Fixes: 385e20706fac ("tcp: use tp->tcp_mstamp in output path") Signed-off-by: Koichiro Den <den@klaipeden.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22soreuseport: fix initialization raceCraig Gallek2-8/+2
Syzkaller stumbled upon a way to trigger WARNING: CPU: 1 PID: 13881 at net/core/sock_reuseport.c:41 reuseport_alloc+0x306/0x3b0 net/core/sock_reuseport.c:39 There are two initialization paths for the sock_reuseport structure in a socket: Through the udp/tcp bind paths of SO_REUSEPORT sockets or through SO_ATTACH_REUSEPORT_[CE]BPF before bind. The existing implementation assumedthat the socket lock protected both of these paths when it actually only protects the SO_ATTACH_REUSEPORT path. Syzkaller triggered this double allocation by running these paths concurrently. This patch moves the check for double allocation into the reuseport_alloc function which is protected by a global spin lock. Fixes: e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection") Fixes: c125e80b8868 ("soreuseport: fast reuseport TCP socket selection") Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21udp: make some messages more descriptiveMatteo Croce1-2/+2
In the UDP code there are two leftover error messages with very few meaning. Replace them with a more descriptive error message as some users reported them as "strange network error". Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21tcp/dccp: fix ireq->opt racesEric Dumazet5-33/+25
syzkaller found another bug in DCCP/TCP stacks [1] For the reasons explained in commit ce1050089c96 ("tcp/dccp: fix ireq->pktopts race"), we need to make sure we do not access ireq->opt unless we own the request sock. Note the opt field is renamed to ireq_opt to ease grep games. [1] BUG: KASAN: use-after-free in ip_queue_xmit+0x1687/0x18e0 net/ipv4/ip_output.c:474 Read of size 1 at addr ffff8801c951039c by task syz-executor5/3295 CPU: 1 PID: 3295 Comm: syz-executor5 Not tainted 4.14.0-rc4+ #80 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x25b/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:427 ip_queue_xmit+0x1687/0x18e0 net/ipv4/ip_output.c:474 tcp_transmit_skb+0x1ab7/0x3840 net/ipv4/tcp_output.c:1135 tcp_send_ack.part.37+0x3bb/0x650 net/ipv4/tcp_output.c:3587 tcp_send_ack+0x49/0x60 net/ipv4/tcp_output.c:3557 __tcp_ack_snd_check+0x2c6/0x4b0 net/ipv4/tcp_input.c:5072 tcp_ack_snd_check net/ipv4/tcp_input.c:5085 [inline] tcp_rcv_state_process+0x2eff/0x4850 net/ipv4/tcp_input.c:6071 tcp_child_process+0x342/0x990 net/ipv4/tcp_minisocks.c:816 tcp_v4_rcv+0x1827/0x2f80 net/ipv4/tcp_ipv4.c:1682 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:249 [inline] ip_local_deliver+0x1ce/0x6e0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:464 [inline] ip_rcv_finish+0x887/0x19a0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:249 [inline] ip_rcv+0xc3f/0x1820 net/ipv4/ip_input.c:493 __netif_receive_skb_core+0x1a3e/0x34b0 net/core/dev.c:4476 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4514 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4587 netif_receive_skb+0xae/0x390 net/core/dev.c:4611 tun_rx_batched.isra.50+0x5ed/0x860 drivers/net/tun.c:1372 tun_get_user+0x249c/0x36d0 drivers/net/tun.c:1766 tun_chr_write_iter+0xbf/0x160 drivers/net/tun.c:1792 call_write_iter include/linux/fs.h:1770 [inline] new_sync_write fs/read_write.c:468 [inline] __vfs_write+0x68a/0x970 fs/read_write.c:481 vfs_write+0x18f/0x510 fs/read_write.c:543 SYSC_write fs/read_write.c:588 [inline] SyS_write+0xef/0x220 fs/read_write.c:580 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x40c341 RSP: 002b:00007f469523ec10 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 000000000040c341 RDX: 0000000000000037 RSI: 0000000020004000 RDI: 0000000000000015 RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000f4240 R11: 0000000000000293 R12: 00000000004b7fd1 R13: 00000000ffffffff R14: 0000000020000000 R15: 0000000000025000 Allocated by task 3295: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 __do_kmalloc mm/slab.c:3725 [inline] __kmalloc+0x162/0x760 mm/slab.c:3734 kmalloc include/linux/slab.h:498 [inline] tcp_v4_save_options include/net/tcp.h:1962 [inline] tcp_v4_init_req+0x2d3/0x3e0 net/ipv4/tcp_ipv4.c:1271 tcp_conn_request+0xf6d/0x3410 net/ipv4/tcp_input.c:6283 tcp_v4_conn_request+0x157/0x210 net/ipv4/tcp_ipv4.c:1313 tcp_rcv_state_process+0x8ea/0x4850 net/ipv4/tcp_input.c:5857 tcp_v4_do_rcv+0x55c/0x7d0 net/ipv4/tcp_ipv4.c:1482 tcp_v4_rcv+0x2d10/0x2f80 net/ipv4/tcp_ipv4.c:1711 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:249 [inline] ip_local_deliver+0x1ce/0x6e0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:464 [inline] ip_rcv_finish+0x887/0x19a0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:249 [inline] ip_rcv+0xc3f/0x1820 net/ipv4/ip_input.c:493 __netif_receive_skb_core+0x1a3e/0x34b0 net/core/dev.c:4476 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4514 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4587 netif_receive_skb+0xae/0x390 net/core/dev.c:4611 tun_rx_batched.isra.50+0x5ed/0x860 drivers/net/tun.c:1372 tun_get_user+0x249c/0x36d0 drivers/net/tun.c:1766 tun_chr_write_iter+0xbf/0x160 drivers/net/tun.c:1792 call_write_iter include/linux/fs.h:1770 [inline] new_sync_write fs/read_write.c:468 [inline] __vfs_write+0x68a/0x970 fs/read_write.c:481 vfs_write+0x18f/0x510 fs/read_write.c:543 SYSC_write fs/read_write.c:588 [inline] SyS_write+0xef/0x220 fs/read_write.c:580 entry_SYSCALL_64_fastpath+0x1f/0xbe Freed by task 3306: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524 __cache_free mm/slab.c:3503 [inline] kfree+0xca/0x250 mm/slab.c:3820 inet_sock_destruct+0x59d/0x950 net/ipv4/af_inet.c:157 __sk_destruct+0xfd/0x910 net/core/sock.c:1560 sk_destruct+0x47/0x80 net/core/sock.c:1595 __sk_free+0x57/0x230 net/core/sock.c:1603 sk_free+0x2a/0x40 net/core/sock.c:1614 sock_put include/net/sock.h:1652 [inline] inet_csk_complete_hashdance+0xd5/0xf0 net/ipv4/inet_connection_sock.c:959 tcp_check_req+0xf4d/0x1620 net/ipv4/tcp_minisocks.c:765 tcp_v4_rcv+0x17f6/0x2f80 net/ipv4/tcp_ipv4.c:1675 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:249 [inline] ip_local_deliver+0x1ce/0x6e0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:464 [inline] ip_rcv_finish+0x887/0x19a0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:249 [inline] ip_rcv+0xc3f/0x1820 net/ipv4/ip_input.c:493 __netif_receive_skb_core+0x1a3e/0x34b0 net/core/dev.c:4476 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4514 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4587 netif_receive_skb+0xae/0x390 net/core/dev.c:4611 tun_rx_batched.isra.50+0x5ed/0x860 drivers/net/tun.c:1372 tun_get_user+0x249c/0x36d0 drivers/net/tun.c:1766 tun_chr_write_iter+0xbf/0x160 drivers/net/tun.c:1792 call_write_iter include/linux/fs.h:1770 [inline] new_sync_write fs/read_write.c:468 [inline] __vfs_write+0x68a/0x970 fs/read_write.c:481 vfs_write+0x18f/0x510 fs/read_write.c:543 SYSC_write fs/read_write.c:588 [inline] SyS_write+0xef/0x220 fs/read_write.c:580 entry_SYSCALL_64_fastpath+0x1f/0xbe Fixes: e994b2f0fb92 ("tcp: do not lock listener to process SYN packets") Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-13ip: update policy routing config helpStephen Hemminger1-5/+3
The kernel config help for policy routing was still pointing at an ancient document from 2000 that refers to Linux 2.1. Update it to point to something that is at least occasionally updated. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11Revert "net: defer call to cgroup_sk_alloc()"Eric Dumazet1-5/+0
This reverts commit fbb1fb4ad415cb31ce944f65a5ca700aaf73a227. This was not the proper fix, lets cleanly revert it, so that following patch can be carried to stable versions. sock_cgroup_ptr() callers do not expect a NULL return value. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-10net: defer call to cgroup_sk_alloc()Eric Dumazet1-0/+5
sk_clone_lock() might run while TCP/DCCP listener already vanished. In order to prevent use after free, it is better to defer cgroup_sk_alloc() to the point we know both parent and child exist, and from process context. Fixes: e994b2f0fb92 ("tcp: do not lock listener to process SYN packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-10net: memcontrol: defer call to mem_cgroup_sk_alloc()Eric Dumazet1-0/+1
Instead of calling mem_cgroup_sk_alloc() from BH context, it is better to call it from inet_csk_accept() in process context. Not only this removes code in mem_cgroup_sk_alloc(), but it also fixes a bug since listener might have been dismantled and css_get() might cause a use-after-free. Fixes: e994b2f0fb92 ("tcp: do not lock listener to process SYN packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller1-1/+2
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree, they are: 1) Fix packet drops due to incorrect ECN handling in IPVS, from Vadim Fedorenko. 2) Fix splat with mark restoration in xt_socket with non-full-sock, patch from Subash Abhinov Kasiviswanathan. 3) ipset bogusly bails out when adding IPv4 range containing more than 2^31 addresses, from Jozsef Kadlecsik. 4) Incorrect pernet unregistration order in ipset, from Florian Westphal. 5) Races between dump and swap in ipset results in BUG_ON splats, from Ross Lagerwall. 6) Fix chain renames in nf_tables, from JingPiao Chen. 7) Fix race in pernet codepath with ebtables table registration, from Artem Savkov. 8) Memory leak in error path in set name allocation in nf_tables, patch from Arvind Yadav. 9) Don't dump chain counters if they are not available, this fixes a crash when listing the ruleset. 10) Fix out of bound memory read in strlcpy() in x_tables compat code, from Eric Dumazet. 11) Make sure we only process TCP packets in SYNPROXY hooks, patch from Lin Zhang. 12) Cannot load rules incrementally anymore after xt_bpf with pinned objects, added in revision 1. From Shmulik Ladkani. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09udp: fix bcast packet receptionPaolo Abeni1-9/+5
The commit bc044e8db796 ("udp: perform source validation for mcast early demux") does not take into account that broadcast packets lands in the same code path and they need different checks for the source address - notably, zero source address are valid for bcast and invalid for mcast. As a result, 2nd and later broadcast packets with 0 source address landing to the same socket are dropped. This breaks dhcp servers. Since we don't have stringent performance requirements for ingress broadcast traffic, fix it by disabling UDP early demux such traffic. Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Fixes: bc044e8db796 ("udp: perform source validation for mcast early demux") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09ipv4: Fix traffic triggered IPsec connections.Steffen Klassert1-1/+1
A recent patch removed the dst_free() on the allocated dst_entry in ipv4_blackhole_route(). The dst_free() marked the dst_entry as dead and added it to the gc list. I.e. it was setup for a one time usage. As a result we may now have a blackhole route cached at a socket on some IPsec scenarios. This makes the connection unusable. Fix this by marking the dst_entry directly at allocation time as 'dead', so it is used only once. Fixes: b838d5e1c5b6 ("ipv4: mark DST_NOGC and remove the operation of dst_free()") Reported-by: Tobias Brunner <tobias@strongswan.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09netfilter: SYNPROXY: skip non-tcp packet in {ipv4, ipv6}_synproxy_hookLin Zhang1-1/+2
In function {ipv4,ipv6}_synproxy_hook we expect a normal tcp packet, but the real server maybe reply an icmp error packet related to the exist tcp conntrack, so we will access wrong tcp data. Fix it by checking for the protocol field and only process tcp traffic. Signed-off-by: Lin Zhang <xiaolou4617@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-10-08gso: fix payload length when gso_size is zeroAlexey Kodanev2-2/+2
When gso_size reset to zero for the tail segment in skb_segment(), later in ipv6_gso_segment(), __skb_udp_tunnel_segment() and gre_gso_segment() we will get incorrect results (payload length, pcsum) for that segment. inet_gso_segment() already has a check for gso_size before calculating payload. The issue was found with LTP vxlan & gre tests over ixgbe NIC. Fixes: 07b26c9454a2 ("gso: Support partial splitting at the frag_list pointer") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02ip_gre: erspan device should keep dstXin Long1-0/+1
The patch 'ip_gre: ipgre_tap device should keep dst' fixed the issue ipgre_tap dev mtu couldn't be updated in tx path. The same fix is needed for erspan as well. Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02ip_gre: set tunnel hlen properly in erspan_tunnel_initXin Long1-1/+3
According to __gre_tunnel_init, tunnel->hlen should be set as the headers' length between inner packet and outer iphdr. It would be used especially to calculate a proper mtu when updating mtu in tnl_update_pmtu. Now without setting it, a bigger mtu value than expected would be updated, which hurts performance a lot. This patch is to fix it by setting tunnel->hlen with: tunnel->tun_hlen + tunnel->encap_hlen + sizeof(struct erspanhdr) Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02ip_gre: check packet length and mtu correctly in erspan_xmitXin Long1-1/+1
As a ARPHRD_ETHER device, skb->len in erspan_xmit is the length of the whole ether packet. So before checking if a packet size exceeds the mtu, skb->len should subtract dev->hard_header_len. Otherwise, all packets with max size according to mtu would be trimmed to be truncated packet. Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02ip_gre: get key from session_id correctly in erspan_rcvXin Long1-3/+1
erspan only uses the first 10 bits of session_id as the key to look up the tunnel. But in erspan_rcv, it missed 'session_id & ID_MASK' when getting the key from session_id. If any other flag is also set in session_id in a packet, it would fail to find the tunnel due to incorrect key in erspan_rcv. This patch is to add 'session_id & ID_MASK' there and also remove the unnecessary variable session_id. Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01udp: perform source validation for mcast early demuxPaolo Abeni2-21/+38
The UDP early demux can leverate the rx dst cache even for multicast unconnected sockets. In such scenario the ipv4 source address is validated only on the first packet in the given flow. After that, when we fetch the dst entry from the socket rx cache, we stop enforcing the rp_filter and we even start accepting any kind of martian addresses. Disabling the dst cache for unconnected multicast socket will cause large performace regression, nearly reducing by half the max ingress tput. Instead we factor out a route helper to completely validate an skb source address for multicast packets and we call it from the UDP early demux for mcast packets landing on unconnected sockets, after successful fetching the related cached dst entry. This still gives a measurable, but limited performance regression: rp_filter = 0 rp_filter = 1 edmux disabled: 1182 Kpps 1127 Kpps edmux before: 2238 Kpps 2238 Kpps edmux after: 2037 Kpps 2019 Kpps The above figures are on top of current net tree. Applying the net-next commit 6e617de84e87 ("net: avoid a full fib lookup when rp_filter is disabled.") the delta with rp_filter == 0 will decrease even more. Fixes: 421b3885bf6d ("udp: ipv4: Add udp early demux") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01IPv4: early demux can return an error codePaolo Abeni3-19/+26
Currently no error is emitted, but this infrastructure will used by the next patch to allow source address validation for mcast sockets. Since early demux can do a route lookup and an ipv4 route lookup can return an error code this is consistent with the current ipv4 route infrastructure. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01ip_gre: ipgre_tap device should keep dstXin Long1-0/+1
Without keeping dst, the tunnel will not update any mtu/pmtu info, since it does not have a dst on the skb. Reproducer: client(ipgre_tap1 - eth1) <-----> (eth1 - ipgre_tap1)server After reducing eth1's mtu on client, then perforamnce became 0. This patch is to netif_keep_dst in gre_tap_init, as ipgre does. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28inetpeer: fix RCU lookup() againEric Dumazet1-2/+2
My prior fix was not complete, as we were dereferencing a pointer three times per node, not twice as I initially thought. Fixes: 4cc5b44b29a9 ("inetpeer: fix RCU lookup()") Fixes: b145425f269a ("inetpeer: remove AVL implementation in favor of RB tree") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26vti: fix use after free in vti_tunnel_xmit/vti6_tnl_xmitAlexey Kodanev1-1/+2
When running LTP IPsec tests, KASan might report: BUG: KASAN: use-after-free in vti_tunnel_xmit+0xeee/0xff0 [ip_vti] Read of size 4 at addr ffff880dc6ad1980 by task swapper/0/0 ... Call Trace: <IRQ> dump_stack+0x63/0x89 print_address_description+0x7c/0x290 kasan_report+0x28d/0x370 ? vti_tunnel_xmit+0xeee/0xff0 [ip_vti] __asan_report_load4_noabort+0x19/0x20 vti_tunnel_xmit+0xeee/0xff0 [ip_vti] ? vti_init_net+0x190/0x190 [ip_vti] ? save_stack_trace+0x1b/0x20 ? save_stack+0x46/0xd0 dev_hard_start_xmit+0x147/0x510 ? icmp_echo.part.24+0x1f0/0x210 __dev_queue_xmit+0x1394/0x1c60 ... Freed by task 0: save_stack_trace+0x1b/0x20 save_stack+0x46/0xd0 kasan_slab_free+0x70/0xc0 kmem_cache_free+0x81/0x1e0 kfree_skbmem+0xb1/0xe0 kfree_skb+0x75/0x170 kfree_skb_list+0x3e/0x60 __dev_queue_xmit+0x1298/0x1c60 dev_queue_xmit+0x10/0x20 neigh_resolve_output+0x3a8/0x740 ip_finish_output2+0x5c0/0xe70 ip_finish_output+0x4ba/0x680 ip_output+0x1c1/0x3a0 xfrm_output_resume+0xc65/0x13d0 xfrm_output+0x1e4/0x380 xfrm4_output_finish+0x5c/0x70 Can be fixed if we get skb->len before dst_output(). Fixes: b9959fd3b0fa ("vti: switch to new ip tunnel code") Fixes: 22e1b23dafa8 ("vti6: Support inter address family tunneling.") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-23inet: fix improper empty comparisonJosef Bacik1-1/+1
When doing my reuseport rework I screwed up and changed a if (hlist_empty(&tb->owners)) to if (!hlist_empty(&tb->owners)) This is obviously bad as all of the reuseport/reuse logic was reversed, which caused weird problems like allowing an ipv4 bind conflict if we opened an ipv4 only socket on a port followed by an ipv6 only socket on the same port. Fixes: b9470c27607b ("inet: kill smallest_size and smallest_port") Reported-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-23net: use inet6_rcv_saddr to compare socketsJosef Bacik1-1/+1
In ipv6_rcv_saddr_equal() we need to use inet6_rcv_saddr(sk) for the ipv6 compare with the fast socket information to make sure we're doing the proper comparisons. Fixes: 637bc8bbe6c0 ("inet: reset tb->fastreuseport when adding a reuseport sk") Reported-and-tested-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-23net: set tb->fast_sk_familyJosef Bacik1-0/+2
We need to set the tb->fast_sk_family properly so we can use the proper comparison function for all subsequent reuseport bind requests. Fixes: 637bc8bbe6c0 ("inet: reset tb->fastreuseport when adding a reuseport sk") Reported-and-tested-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20tcp: fastopen: fix on syn-data transmit failureEric Dumazet1-0/+9
Our recent change exposed a bug in TCP Fastopen Client that syzkaller found right away [1] When we prepare skb with SYN+DATA, we attempt to transmit it, and we update socket state as if the transmit was a success. In socket RTX queue we have two skbs, one with the SYN alone, and a second one containing the DATA. When (malicious) ACK comes in, we now complain that second one had no skb_mstamp. The proper fix is to make sure that if the transmit failed, we do not pretend we sent the DATA skb, and make it our send_head. When 3WHS completes, we can now send the DATA right away, without having to wait for a timeout. [1] WARNING: CPU: 0 PID: 100189 at net/ipv4/tcp_input.c:3117 tcp_clean_rtx_queue+0x2057/0x2ab0 net/ipv4/tcp_input.c:3117() WARN_ON_ONCE(last_ackt == 0); Modules linked in: CPU: 0 PID: 100189 Comm: syz-executor1 Not tainted Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 0000000000000000 ffff8800b35cb1d8 ffffffff81cad00d 0000000000000000 ffffffff828a4347 ffff88009f86c080 ffffffff8316eb20 0000000000000d7f ffff8800b35cb220 ffffffff812c33c2 ffff8800baad2440 00000009d46575c0 Call Trace: [<ffffffff81cad00d>] __dump_stack [<ffffffff81cad00d>] dump_stack+0xc1/0x124 [<ffffffff812c33c2>] warn_slowpath_common+0xe2/0x150 [<ffffffff812c361e>] warn_slowpath_null+0x2e/0x40 [<ffffffff828a4347>] tcp_clean_rtx_queue+0x2057/0x2ab0 n [<ffffffff828ae6fd>] tcp_ack+0x151d/0x3930 [<ffffffff828baa09>] tcp_rcv_state_process+0x1c69/0x4fd0 [<ffffffff828efb7f>] tcp_v4_do_rcv+0x54f/0x7c0 [<ffffffff8258aacb>] sk_backlog_rcv [<ffffffff8258aacb>] __release_sock+0x12b/0x3a0 [<ffffffff8258ad9e>] release_sock+0x5e/0x1c0 [<ffffffff8294a785>] inet_wait_for_connect [<ffffffff8294a785>] __inet_stream_connect+0x545/0xc50 [<ffffffff82886f08>] tcp_sendmsg_fastopen [<ffffffff82886f08>] tcp_sendmsg+0x2298/0x35a0 [<ffffffff82952515>] inet_sendmsg+0xe5/0x520 [<ffffffff8257152f>] sock_sendmsg_nosec [<ffffffff8257152f>] sock_sendmsg+0xcf/0x110 Fixes: 8c72c65b426b ("tcp: update skb->skb_mstamp more carefully") Fixes: 783237e8daf1 ("net-tcp: Fast Open client - sending SYN-data") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19tcp: remove two unused functionsYuchung Cheng1-34/+0
remove tcp_may_send_now and tcp_snd_test that are no longer used Fixes: 840a3cbe8969 ("tcp: remove forward retransmit feature") Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-16tcp: fix data delivery rateEric Dumazet1-4/+3
Now skb->mstamp_skb is updated later, we also need to call tcp_rate_skb_sent() after the update is done. Fixes: 8c72c65b426b ("tcp: update skb->skb_mstamp more carefully") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-16tcp: update skb->skb_mstamp more carefullyEric Dumazet1-7/+12
liujian reported a problem in TCP_USER_TIMEOUT processing with a patch in tcp_probe_timer() : https://www.spinics.net/lists/netdev/msg454496.html After investigations, the root cause of the problem is that we update skb->skb_mstamp of skbs in write queue, even if the attempt to send a clone or copy of it failed. One reason being a routing problem. This patch prevents this, solving liujian issue. It also removes a potential RTT miscalculation, since __tcp_retransmit_skb() is not OR-ing TCP_SKB_CB(skb)->sacked with TCPCB_EVER_RETRANS if a failure happens, but skb->skb_mstamp has been changed. A future ACK would then lead to a very small RTT sample and min_rtt would then be lowered to this too small value. Tested: # cat user_timeout.pkt --local_ip=192.168.102.64 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 `ifconfig tun0 192.168.102.64/16; ip ro add 192.0.2.1 dev tun0` +0 < S 0:0(0) win 0 <mss 1460> +0 > S. 0:0(0) ack 1 <mss 1460> +.1 < . 1:1(0) ack 1 win 65530 +0 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_USER_TIMEOUT, [3000], 4) = 0 +0 write(4, ..., 24) = 24 +0 > P. 1:25(24) ack 1 win 29200 +.1 < . 1:1(0) ack 25 win 65530 //change the ipaddress +1 `ifconfig tun0 192.168.0.10/16` +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +0 `ifconfig tun0 192.168.102.64/16` +0 < . 1:2(1) ack 25 win 65530 +0 `ifconfig tun0 192.168.0.10/16` +3 write(4, ..., 24) = -1 # ./packetdrill user_timeout.pkt Signed-off-by: Eric Dumazet <edumazet@googl.com> Reported-by: liujian <liujian56@huawei.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-16net: ipv4: fix l3slave check for index returned in IP_PKTINFODavid Ahern1-2/+6
rt_iif is only set to the actual egress device for the output path. The recent change to consider the l3slave flag when returning IP_PKTINFO works for local traffic (the correct device index is returned), but it broke the more typical use case of packets received from a remote host always returning the VRF index rather than the original ingress device. Update the fixup to consider l3slave and rt_iif actually getting set. Fixes: 1dfa76390bf05 ("net: ipv4: add check for l3slave for index returned in IP_PKTINFO") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-13ip_tunnel: fix ip tunnel lookup in collect_md modeHaishuang Yan1-1/+1
In collect_md mode, if the tun dev is down, it still can call ip_tunnel_rcv to receive on packets, and the rx statistics increase improperly. When the md tunnel is down, it's not neccessary to increase RX drops for the tunnel device, packets would be recieved on fallback tunnel, and the RX drops on fallback device will be increased as expected. Fixes: 2e15ea390e6f ("ip_gre: Add support to collect tunnel metadata.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-13tcp/dccp: remove reqsk_put() from inet_child_forget()Eric Dumazet1-1/+1
Back in linux-4.4, I inadvertently put a call to reqsk_put() in inet_child_forget(), forgetting it could be called from two different points. In the case it is called from inet_csk_reqsk_queue_add(), we want to keep the reference on the request socket, since it is released later by the caller (tcp_v{4|6}_rcv()) This bug never showed up because atomic_dec_and_test() was not signaling the underflow, and SLAB_DESTROY_BY RCU semantic for request sockets prevented the request to be put in quarantine. Recent conversion of socket refcount from atomic_t to refcount_t finally exposed the bug. So move the reqsk_put() to inet_csk_listen_stop() to fix this. Thanks to Shankara Pailoor for using syzkaller and providing a nice set of .config and C repro. WARNING: CPU: 2 PID: 4277 at lib/refcount.c:186 refcount_sub_and_test+0x167/0x1b0 lib/refcount.c:186 Kernel panic - not syncing: panic_on_warn set ... CPU: 2 PID: 4277 Comm: syz-executor0 Not tainted 4.13.0-rc7 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0xf7/0x1aa lib/dump_stack.c:52 panic+0x1ae/0x3a7 kernel/panic.c:180 __warn+0x1c4/0x1d9 kernel/panic.c:541 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:190 do_trap_no_signal arch/x86/kernel/traps.c:224 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:273 do_error_trap+0x118/0x340 arch/x86/kernel/traps.c:310 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:323 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:846 RIP: 0010:refcount_sub_and_test+0x167/0x1b0 lib/refcount.c:186 RSP: 0018:ffff88006e006b60 EFLAGS: 00010286 RAX: 0000000000000026 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000026 RSI: 1ffff1000dc00d2c RDI: ffffed000dc00d60 RBP: ffff88006e006bf0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff1000dc00d6d R13: 00000000ffffffff R14: 0000000000000001 R15: ffff88006ce9d340 refcount_dec_and_test+0x1a/0x20 lib/refcount.c:211 reqsk_put+0x71/0x2b0 include/net/request_sock.h:123 tcp_v4_rcv+0x259e/0x2e20 net/ipv4/tcp_ipv4.c:1729 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:248 [inline] ip_local_deliver+0x1ce/0x6d0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:477 [inline] ip_rcv_finish+0x8db/0x19c0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:248 [inline] ip_rcv+0xc3f/0x17d0 net/ipv4/ip_input.c:488 __netif_receive_skb_core+0x1fb7/0x31f0 net/core/dev.c:4298 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4336 process_backlog+0x1c5/0x6d0 net/core/dev.c:5102 napi_poll net/core/dev.c:5499 [inline] net_rx_action+0x6d3/0x14a0 net/core/dev.c:5565 __do_softirq+0x2cb/0xb2d kernel/softirq.c:284 do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:898 </IRQ> do_softirq.part.16+0x63/0x80 kernel/softirq.c:328 do_softirq kernel/softirq.c:176 [inline] __local_bh_enable_ip+0x84/0x90 kernel/softirq.c:181 local_bh_enable include/linux/bottom_half.h:31 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:705 [inline] ip_finish_output2+0x8ad/0x1360 net/ipv4/ip_output.c:231 ip_finish_output+0x74e/0xb80 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:237 [inline] ip_output+0x1cc/0x850 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:471 [inline] ip_local_out+0x95/0x160 net/ipv4/ip_output.c:124 ip_queue_xmit+0x8c6/0x1810 net/ipv4/ip_output.c:504 tcp_transmit_skb+0x1963/0x3320 net/ipv4/tcp_output.c:1123 tcp_send_ack.part.35+0x38c/0x620 net/ipv4/tcp_output.c:3575 tcp_send_ack+0x49/0x60 net/ipv4/tcp_output.c:3545 tcp_rcv_synsent_state_process net/ipv4/tcp_input.c:5795 [inline] tcp_rcv_state_process+0x4876/0x4b60 net/ipv4/tcp_input.c:5930 tcp_v4_do_rcv+0x58a/0x820 net/ipv4/tcp_ipv4.c:1483 sk_backlog_rcv include/net/sock.h:907 [inline] __release_sock+0x124/0x360 net/core/sock.c:2223 release_sock+0xa4/0x2a0 net/core/sock.c:2715 inet_wait_for_connect net/ipv4/af_inet.c:557 [inline] __inet_stream_connect+0x671/0xf00 net/ipv4/af_inet.c:643 inet_stream_connect+0x58/0xa0 net/ipv4/af_inet.c:682 SYSC_connect+0x204/0x470 net/socket.c:1628 SyS_connect+0x24/0x30 net/socket.c:1609 entry_SYSCALL_64_fastpath+0x18/0xad RIP: 0033:0x451e59 RSP: 002b:00007f474843fc08 EFLAGS: 00000216 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 0000000000451e59 RDX: 0000000000000010 RSI: 0000000020002000 RDI: 0000000000000007 RBP: 0000000000000046 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 0000000000000000 R13: 00007ffc040a0f8f R14: 00007f47484409c0 R15: 0000000000000000 Fixes: ebb516af60e1 ("tcp/dccp: fix race at listener dismantle phase") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Shankara Pailoor <sp3485@columbia.edu> Tested-by: Shankara Pailoor <sp3485@columbia.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-09ip_tunnel: fix setting ttl and tos value in collect_md modeHaishuang Yan1-2/+2
ttl and tos variables are declared and assigned, but are not used in iptunnel_xmit() function. Fixes: cfc7381b3002 ("ip_tunnel: add collect_md mode to IPIP tunnel") Cc: Alexei Starovoitov <ast@fb.com> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-15 16:36:51 +0300