summaryrefslogtreecommitdiff
path: root/net/ipv4/udp_offload.c
AgeCommit message (Collapse)AuthorFilesLines
2021-03-31udp: properly complete L4 GRO over UDP tunnel packetPaolo Abeni1-1/+7
After the previous patch, the stack can do L4 UDP aggregation on top of a UDP tunnel. In such scenario, udp{4,6}_gro_complete will be called twice. This function will enter its is_flist branch immediately, even though that is only correct on the second call, as GSO_FRAGLIST is only relevant for the inner packet. Instead, we need to try first UDP tunnel-based aggregation, if the GRO packet requires that. This patch changes udp{4,6}_gro_complete to skip the frag list processing when while encap_mark == 1, identifying processing of the outer tunnel header. Additionally, clears the field in udp_gro_complete() so that we can enter the frag list path on the next round, for the inner header. v1 -> v2: - hopefully clarified the commit message Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-31udp: skip L4 aggregation for UDP tunnel packetsPaolo Abeni1-8/+11
If NETIF_F_GRO_FRAGLIST or NETIF_F_GRO_UDP_FWD are enabled, and there are UDP tunnels available in the system, udp_gro_receive() could end-up doing L4 aggregation (either SKB_GSO_UDP_L4 or SKB_GSO_FRAGLIST) at the outer UDP tunnel level for packets effectively carrying and UDP tunnel header. That could cause inner protocol corruption. If e.g. the relevant packets carry a vxlan header, different vxlan ids will be ignored/ aggregated to the same GSO packet. Inner headers will be ignored, too, so that e.g. TCP over vxlan push packets will be held in the GRO engine till the next flush, etc. Just skip the SKB_GSO_UDP_L4 and SKB_GSO_FRAGLIST code path if the current packet could land in a UDP tunnel, and let udp_gro_receive() do GRO via udp_sk(sk)->gro_receive. The check implemented in this patch is broader than what is strictly needed, as the existing UDP tunnel could be e.g. configured on top of a different device: we could end-up skipping GRO at-all for some packets. Anyhow, that is a very thin corner case and covering it will add quite a bit of complexity. v1 -> v2: - hopefully clarify the commit message Fixes: 9fd1ff5d2ac7 ("udp: Support UDP fraglist GRO/GSO.") Fixes: 36707061d6ba ("udp: allow forwarding of plain (non-fraglisted) UDP GRO packets") Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-28net: Fix gro aggregation for udp encaps with zero csumDaniel Borkmann1-1/+1
We noticed a GRO issue for UDP-based encaps such as vxlan/geneve when the csum for the UDP header itself is 0. In that case, GRO aggregation does not take place on the phys dev, but instead is deferred to the vxlan/geneve driver (see trace below). The reason is essentially that GRO aggregation bails out in udp_gro_receive() for such case when drivers marked the skb with CHECKSUM_UNNECESSARY (ice, i40e, others) where for non-zero csums 2abb7cdc0dc8 ("udp: Add support for doing checksum unnecessary conversion") promotes those skbs to CHECKSUM_COMPLETE and napi context has csum_valid set. This is however not the case for zero UDP csum (here: csum_cnt is still 0 and csum_valid continues to be false). At the same time 57c67ff4bd92 ("udp: additional GRO support") added matches on !uh->check ^ !uh2->check as part to determine candidates for aggregation, so it certainly is expected to handle zero csums in udp_gro_receive(). The purpose of the check added via 662880f44203 ("net: Allow GRO to use and set levels of checksum unnecessary") seems to catch bad csum and stop aggregation right away. One way to fix aggregation in the zero case is to only perform the !csum_valid check in udp_gro_receive() if uh->check is infact non-zero. Before: [...] swapper 0 [008] 731.946506: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100400 len=1500 (1) swapper 0 [008] 731.946507: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100200 len=1500 swapper 0 [008] 731.946507: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101100 len=1500 swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101700 len=1500 swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101b00 len=1500 swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100600 len=1500 swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100f00 len=1500 swapper 0 [008] 731.946509: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100a00 len=1500 swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100500 len=1500 swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100700 len=1500 swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101d00 len=1500 (2) swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101000 len=1500 swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101c00 len=1500 swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101400 len=1500 swapper 0 [008] 731.946518: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100e00 len=1500 swapper 0 [008] 731.946518: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101600 len=1500 swapper 0 [008] 731.946521: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100800 len=774 swapper 0 [008] 731.946530: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff966497100400 len=14032 (1) swapper 0 [008] 731.946530: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff966497101d00 len=9112 (2) [...] # netperf -H 10.55.10.4 -t TCP_STREAM -l 20 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.55.10.4 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 20.01 13129.24 After: [...] swapper 0 [026] 521.862641: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d479000 len=11286 (1) swapper 0 [026] 521.862643: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d479000 len=11236 (1) swapper 0 [026] 521.862650: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d478500 len=2898 (2) swapper 0 [026] 521.862650: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d479f00 len=8490 (3) swapper 0 [026] 521.862653: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d478500 len=2848 (2) swapper 0 [026] 521.862653: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d479f00 len=8440 (3) [...] # netperf -H 10.55.10.4 -t TCP_STREAM -l 20 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.55.10.4 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 20.01 24576.53 Fixes: 57c67ff4bd92 ("udp: additional GRO support") Fixes: 662880f44203 ("net: Allow GRO to use and set levels of checksum unnecessary") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tom Herbert <tom@herbertland.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20210226212248.8300-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-5/+64
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02udp: ipv4: manipulate network header of NATed UDP GRO fraglistDongseok Yi1-5/+64
UDP/IP header of UDP GROed frag_skbs are not updated even after NAT forwarding. Only the header of head_skb from ip_finish_output_gso -> skb_gso_segment is updated but following frag_skbs are not updated. A call path skb_mac_gso_segment -> inet_gso_segment -> udp4_ufo_fragment -> __udp_gso_segment -> __udp_gso_segment_list does not try to update UDP/IP header of the segment list but copy only the MAC header. Update port, addr and check of each skb of the segment list in __udp_gso_segment_list. It covers both SNAT and DNAT. Fixes: 9fd1ff5d2ac7 (udp: Support UDP fraglist GRO/GSO.) Signed-off-by: Dongseok Yi <dseok.yi@samsung.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Link: https://lore.kernel.org/r/1611962007-80092-1-git-send-email-dseok.yi@samsung.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-24udp: allow forwarding of plain (non-fraglisted) UDP GRO packetsAlexander Lobakin1-1/+2
Commit 9fd1ff5d2ac7 ("udp: Support UDP fraglist GRO/GSO.") actually not only added a support for fraglisted UDP GRO, but also tweaked some logics the way that non-fraglisted UDP GRO started to work for forwarding too. Commit 2e4ef10f5850 ("net: add GSO UDP L4 and GSO fraglists to the list of software-backed types") added GSO UDP L4 to the list of software GSO to allow virtual netdevs to forward them as is up to the real drivers. Tests showed that currently forwarding and NATing of plain UDP GRO packets are performed fully correctly, regardless if the target netdevice has a support for hardware/driver GSO UDP L4 or not. Add the last element and allow to form plain UDP GRO packets if we are on forwarding path, and the new NETIF_F_GRO_UDP_FWD is enabled on a receiving netdevice. If both NETIF_F_GRO_FRAGLIST and NETIF_F_GRO_UDP_FWD are set, fraglisted GRO takes precedence. This keeps the current behaviour and is generally more optimal for now, as the number of NICs with hardware USO offload is relatively small. Signed-off-by: Alexander Lobakin <alobakin@pm.me> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21udp: not remove the CRC flag from dev features when need_csum is falseXin Long1-2/+2
In __skb_udp_tunnel_segment(), when it's a SCTP over VxLAN/GENEVE packet and need_csum is false, which means the outer udp checksum doesn't need to be computed, csum_start and csum_offset could be used by the inner SCTP CRC CSUM for SCTP HW CRC offload. So this patch is to not remove the CRC flag from dev features when need_csum is false. Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/1e81b700642498546eaa3f298e023fd7ad394f85.1610776757.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-13Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-3/+16
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-13net: udp: remove redundant initialization in udp_gro_completeMenglong Dong1-1/+1
The initialization for 'err' with '-ENOSYS' is redundant and can be removed, as it is updated soon and not used. Changes since v1: - Move the err declaration below struct sock *sk Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn> Link: https://lore.kernel.org/r/5faa01d5.1c69fb81.8451c.cb5b@mx.google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12net: udp: fix IP header access and skb lookup on Fast/frag0 UDP GROAlexander Lobakin1-2/+15
udp{4,6}_lib_lookup_skb() use ip{,v6}_hdr() to get IP header of the packet. While it's probably OK for non-frag0 paths, this helpers will also point to junk on Fast/frag0 GRO when all headers are located in frags. As a result, sk/skb lookup may fail or give wrong results. To support both GRO modes, skb_gro_network_header() might be used. To not modify original functions, add private versions of udp{4,6}_lib_lookup_skb() only to perform correct sk lookups on GRO. Present since the introduction of "application-level" UDP GRO in 4.7-rc1. Misc: replace totally unneeded ternaries with plain ifs. Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket") Suggested-by: Willem de Bruijn <willemb@google.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Alexander Lobakin <alobakin@pm.me> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12net: udp: fix UDP header access on Fast/frag0 UDP GROAlexander Lobakin1-1/+1
UDP GRO uses udp_hdr(skb) in its .gro_receive() callback. While it's probably OK for non-frag0 paths (when all headers or even the entire frame are already in skb head), this inline points to junk when using Fast GRO (napi_gro_frags() or napi_gro_receive() with only Ethernet header in skb head and all the rest in the frags) and breaks GRO packet compilation and the packet flow itself. To support both modes, skb_gro_header_fast() + skb_gro_header_slow() are typically used. UDP even has an inline helper that makes use of them, udp_gro_udphdr(). Use that instead of troublemaking udp_hdr() to get rid of the out-of-order delivers. Present since the introduction of plain UDP GRO in 5.0-rc1. Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Alexander Lobakin <alobakin@pm.me> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-31udp: support sctp over udp in skb_udp_tunnel_segmentXin Long1-0/+3
For the gso of sctp over udp packets, sctp_gso_segment() will be called in skb_udp_tunnel_segment(), we need to set transport_header to sctp header. As all the current HWs can't handle both crc checksum and udp checksum at the same time, the crc checksum has to be done in sctp_gso_segment() by removing the NETIF_F_SCTP_CRC flag from the features. Meanwhile, if the HW can't do udp checksum, csum and csum_start has to be set correctly, and udp checksum will be done in __skb_udp_tunnel_segment() by calling gso_make_checksum(). Thanks to Paolo, Marcelo and Guillaume for helping with this one. v1->v2: - no change. v2->v3: - remove the he NETIF_F_SCTP_CRC flag from the features. - set csum and csum_start in sctp_gso_make_checksum(). Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-03-30udp: initialize is_flist with 0 in udp_gro_receiveXin Long1-0/+1
Without NAPI_GRO_CB(skb)->is_flist initialized, when the dev doesn't support NETIF_F_GRO_FRAGLIST, is_flist can still be set and fraglist will be used in udp_gro_receive(). So fix it by initializing is_flist with 0 in udp_gro_receive. Fixes: 9fd1ff5d2ac7 ("udp: Support UDP fraglist GRO/GSO.") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27udp: Support UDP fraglist GRO/GSO.Steffen Klassert1-23/+81
This patch extends UDP GRO to support fraglist GRO/GSO by using the previously introduced infrastructure. If the feature is enabled, all UDP packets are going to fraglist GRO (local input and forward). After validating the csum, we mark ip_summed as CHECKSUM_UNNECESSARY for fraglist GRO packets to make sure that the csum is not touched. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-03net: remove the check argument from __skb_gro_checksum_convertLi RongQing1-1/+1
The argument is always ignored, so remove it. Signed-off-by: Li RongQing <lirongqing@baidu.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+5
Minor SPDX change conflict. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19net/udp_gso: Allow TX timestamp with UDP GSOFred Klassen1-0/+5
Fixes an issue where TX Timestamps are not arriving on the error queue when UDP_SEGMENT CMSG type is combined with CMSG type SO_TIMESTAMPING. This can be illustrated with an updated updgso_bench_tx program which includes the '-T' option to test for this condition. It also introduces the '-P' option which will call poll() before reading the error queue. ./udpgso_bench_tx -4ucTPv -S 1472 -l2 -D 172.16.120.18 poll timeout udp tx: 0 MB/s 1 calls/s 1 msg/s The "poll timeout" message above indicates that TX timestamp never arrived. This patch preserves tx_flags for the first UDP GSO segment. Only the first segment is timestamped, even though in some cases there may be benefital in timestamping both the first and last segment. Factors in deciding on first segment timestamp only: - Timestamping both first and last segmented is not feasible. Hardware can only have one outstanding TS request at a time. - Timestamping last segment may under report network latency of the previous segments. Even though the doorbell is suppressed, the ring producer counter has been incremented. - Timestamping the first segment has the upside in that it reports timestamps from the application's view, e.g. RTT. - Timestamping the first segment has the downside that it may underreport tx host network latency. It appears that we have to pick one or the other. And possibly follow-up with a config flag to choose behavior. v2: Remove tests as noted by Willem de Bruijn <willemb@google.com> Moving tests from net to net-next v3: Update only relevant tx_flag bits as per Willem de Bruijn <willemb@google.com> v4: Update comments and commit message as per Willem de Bruijn <willemb@google.com> Fixes: ee80d1ebe5ba ("udp: add udp gso") Signed-off-by: Fred Klassen <fklassen@appneta.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-5/+1
Some ISDN files that got removed in net-next had some changes done in mainline, take the removals. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-06net: ipv4: drop unneeded likely() call around IS_ERR()Enrico Weigelt1-1/+1
IS_ERR() already calls unlikely(), so this extra unlikely() call around IS_ERR() is not needed. Signed-off-by: Enrico Weigelt <info@metux.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02udp: fix GRO packet of deathEric Dumazet1-3/+10
syzbot was able to crash host by sending UDP packets with a 0 payload. TCP does not have this issue since we do not aggregate packets without payload. Since dev_gro_receive() sets gso_size based on skb_gro_len(skb) it seems not worth trying to cope with padded packets. BUG: KASAN: slab-out-of-bounds in skb_gro_receive+0xf5f/0x10e0 net/core/skbuff.c:3826 Read of size 16 at addr ffff88808893fff0 by task syz-executor612/7889 CPU: 0 PID: 7889 Comm: syz-executor612 Not tainted 5.1.0-rc7+ #96 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load16_noabort+0x14/0x20 mm/kasan/generic_report.c:133 skb_gro_receive+0xf5f/0x10e0 net/core/skbuff.c:3826 udp_gro_receive_segment net/ipv4/udp_offload.c:382 [inline] call_gro_receive include/linux/netdevice.h:2349 [inline] udp_gro_receive+0xb61/0xfd0 net/ipv4/udp_offload.c:414 udp4_gro_receive+0x763/0xeb0 net/ipv4/udp_offload.c:478 inet_gro_receive+0xe72/0x1110 net/ipv4/af_inet.c:1510 dev_gro_receive+0x1cd0/0x23c0 net/core/dev.c:5581 napi_gro_frags+0x36b/0xd10 net/core/dev.c:5843 tun_get_user+0x2f24/0x3fb0 drivers/net/tun.c:1981 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2027 call_write_iter include/linux/fs.h:1866 [inline] do_iter_readv_writev+0x5e1/0x8e0 fs/read_write.c:681 do_iter_write fs/read_write.c:957 [inline] do_iter_write+0x184/0x610 fs/read_write.c:938 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1002 do_writev+0x15e/0x370 fs/read_write.c:1037 __do_sys_writev fs/read_write.c:1110 [inline] __se_sys_writev fs/read_write.c:1107 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1107 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x441cc0 Code: 05 48 3d 01 f0 ff ff 0f 83 9d 09 fc ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 83 3d 51 93 29 00 00 75 14 b8 14 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 74 09 fc ff c3 48 83 ec 08 e8 ba 2b 00 00 RSP: 002b:00007ffe8c716118 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 00007ffe8c716150 RCX: 0000000000441cc0 RDX: 0000000000000001 RSI: 00007ffe8c716170 RDI: 00000000000000f0 RBP: 0000000000000000 R08: 000000000000ffff R09: 0000000000a64668 R10: 0000000020000040 R11: 0000000000000246 R12: 000000000000c2d9 R13: 0000000000402b50 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 5143: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_kmalloc mm/kasan/common.c:497 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:470 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:505 slab_post_alloc_hook mm/slab.h:437 [inline] slab_alloc mm/slab.c:3393 [inline] kmem_cache_alloc+0x11a/0x6f0 mm/slab.c:3555 mm_alloc+0x1d/0xd0 kernel/fork.c:1030 bprm_mm_init fs/exec.c:363 [inline] __do_execve_file.isra.0+0xaa3/0x23f0 fs/exec.c:1791 do_execveat_common fs/exec.c:1865 [inline] do_execve fs/exec.c:1882 [inline] __do_sys_execve fs/exec.c:1958 [inline] __se_sys_execve fs/exec.c:1953 [inline] __x64_sys_execve+0x8f/0xc0 fs/exec.c:1953 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 5351: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:459 kasan_slab_free+0xe/0x10 mm/kasan/common.c:467 __cache_free mm/slab.c:3499 [inline] kmem_cache_free+0x86/0x260 mm/slab.c:3765 __mmdrop+0x238/0x320 kernel/fork.c:677 mmdrop include/linux/sched/mm.h:49 [inline] finish_task_switch+0x47b/0x780 kernel/sched/core.c:2746 context_switch kernel/sched/core.c:2880 [inline] __schedule+0x81b/0x1cc0 kernel/sched/core.c:3518 preempt_schedule_irq+0xb5/0x140 kernel/sched/core.c:3745 retint_kernel+0x1b/0x2d arch_local_irq_restore arch/x86/include/asm/paravirt.h:767 [inline] kmem_cache_free+0xab/0x260 mm/slab.c:3766 anon_vma_chain_free mm/rmap.c:134 [inline] unlink_anon_vmas+0x2ba/0x870 mm/rmap.c:401 free_pgtables+0x1af/0x2f0 mm/memory.c:394 exit_mmap+0x2d1/0x530 mm/mmap.c:3144 __mmput kernel/fork.c:1046 [inline] mmput+0x15f/0x4c0 kernel/fork.c:1067 exec_mmap fs/exec.c:1046 [inline] flush_old_exec+0x8d9/0x1c20 fs/exec.c:1279 load_elf_binary+0x9bc/0x53f0 fs/binfmt_elf.c:864 search_binary_handler fs/exec.c:1656 [inline] search_binary_handler+0x17f/0x570 fs/exec.c:1634 exec_binprm fs/exec.c:1698 [inline] __do_execve_file.isra.0+0x1394/0x23f0 fs/exec.c:1818 do_execveat_common fs/exec.c:1865 [inline] do_execve fs/exec.c:1882 [inline] __do_sys_execve fs/exec.c:1958 [inline] __se_sys_execve fs/exec.c:1953 [inline] __x64_sys_execve+0x8f/0xc0 fs/exec.c:1953 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff88808893f7c0 which belongs to the cache mm_struct of size 1496 The buggy address is located 600 bytes to the right of 1496-byte region [ffff88808893f7c0, ffff88808893fd98) The buggy address belongs to the page: page:ffffea0002224f80 count:1 mapcount:0 mapping:ffff88821bc40ac0 index:0xffff88808893f7c0 compound_mapcount: 0 flags: 0x1fffc0000010200(slab|head) raw: 01fffc0000010200 ffffea00025b4f08 ffffea00027b9d08 ffff88821bc40ac0 raw: ffff88808893f7c0 ffff88808893e440 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88808893fe80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88808893ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88808893ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff888088940000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888088940080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28udp: fix GRO reception in case of length mismatchPaolo Abeni1-4/+5
Currently, the UDP GRO code path does bad things on some edge conditions - Aggregation can happen even on packet with different lengths. Fix the above by rewriting the 'complete' condition for GRO packets. While at it, note explicitly that we allow merging the first packet per burst below gso_size. Reported-by: Sean Tong <seantong114@gmail.com> Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16udp: use indirect call wrappers for GRO socket lookupPaolo Abeni1-2/+6
This avoids another indirect call for UDP GRO. Again, the test for the IPv6 variant is performed first. v1 -> v2: - adapted to INDIRECT_CALL_ changes Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: use indirect call wrappers at GRO transport layerPaolo Abeni1-3/+4
This avoids an indirect call in the receive path for TCP and UDP packets. TCP takes precedence on UDP, so that we have a single additional conditional in the common case. When IPV6 is build as module, all gro symbols except UDPv6 are builtin, while the latter belong to the ipv6 module, so we need some special care. v1 -> v2: - adapted to INDIRECT_CALL_ changes v2 -> v3: - fix build issue with CONFIG_IPV6=m Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08udp: implement GRO for plain UDP sockets.Paolo Abeni1-22/+87
This is the RX counterpart of commit bec1f6f69736 ("udp: generate gso with UDP_SEGMENT"). When UDP_GRO is enabled, such socket is also eligible for GRO in the rx path: UDP segments directed to such socket are assembled into a larger GSO_UDP_L4 packet. The core UDP GRO support is enabled with setsockopt(UDP_GRO). Initial benchmark numbers: Before: udp rx: 1079 MB/s 769065 calls/s After: udp rx: 1466 MB/s 24877 calls/s This change introduces a side effect in respect to UDP tunnels: after a UDP tunnel creation, now the kernel performs a lookup per ingress UDP packet, while before such lookup happened only if the ingress packet carried a valid internal header csum. rfc v2 -> rfc v3: - fixed typos in macro name and comments - really enforce UDP_GRO_CNT_MAX, instead of UDP_GRO_CNT_MAX + 1 - acquire socket lock in UDP_GRO setsockopt rfc v1 -> rfc v2: - use a new option to enable UDP GRO - use static keys to protect the UDP GRO socket lookup Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05udp: gro behind static keyWillem de Bruijn1-1/+1
Avoid the socket lookup cost in udp_gro_receive if no socket has a udp tunnel callback configured. udp_sk(sk)->gro_receive requires a registration with setup_udp_tunnel_sock, which enables the static key. Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-03Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Simple overlapping changes in stmmac driver. Adjust skb_gro_flush_final_remcsum function signature to make GRO list changes in net-next, as per Stephen Rothwell's example merge resolution. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02net: fix use-after-free in GRO with ESPSabrina Dubroca1-1/+1
Since the addition of GRO for ESP, gro_receive can consume the skb and return -EINPROGRESS. In that case, the lower layer GRO handler cannot touch the skb anymore. Commit 5f114163f2f5 ("net: Add a skb_gro_flush_final helper.") converted some of the gro_receive handlers that can lead to ESP's gro_receive so that they wouldn't access the skb when -EINPROGRESS is returned, but missed other spots, mainly in tunneling protocols. This patch finishes the conversion to using skb_gro_flush_final(), and adds a new helper, skb_gro_flush_final_remcsum(), used in VXLAN and GUE. Fixes: 5f114163f2f5 ("net: Add a skb_gro_flush_final helper.") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26net: Convert GRO SKB handling to list_head.David Miller1-6/+7
Manage pending per-NAPI GRO packets via list_head. Return an SKB pointer from the GRO receive handlers. When GRO receive handlers return non-NULL, it means that this SKB needs to be completed at this time and removed from the NAPI queue. Several operations are greatly simplified by this transformation, especially timing out the oldest SKB in the list when gro_count exceeds MAX_GRO_SKBS, and napi_gro_flush() which walks the queue in reverse order. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11udp: avoid refcount_t saturation in __udp_gso_segment()Eric Dumazet1-3/+11
For some reason, Willem thought that the issue we fixed for TCP in commit 7ec318feeed1 ("tcp: gso: avoid refcount_t warning from tcp_gso_segment()") was not relevant for UDP GSO. But syzbot found its way. refcount_t: saturated; leaking memory. WARNING: CPU: 0 PID: 10261 at lib/refcount.c:78 refcount_add_not_zero+0x2d4/0x320 lib/refcount.c:78 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 10261 Comm: syz-executor5 Not tainted 4.17.0-rc3+ #38 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 panic+0x22f/0x4de kernel/panic.c:184 __warn.cold.8+0x163/0x1b3 kernel/panic.c:536 report_bug+0x252/0x2d0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] do_error_trap+0x1de/0x490 arch/x86/kernel/traps.c:296 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:992 RIP: 0010:refcount_add_not_zero+0x2d4/0x320 lib/refcount.c:78 RSP: 0018:ffff880196db6b90 EFLAGS: 00010282 RAX: 0000000000000026 RBX: 00000000ffffff01 RCX: ffffc900040d9000 RDX: 0000000000004a29 RSI: ffffffff8160f6f1 RDI: ffff880196db66f0 RBP: ffff880196db6c78 R08: ffff8801b33d6740 R09: 0000000000000002 R10: ffff8801b33d6740 R11: 0000000000000000 R12: 0000000000000000 R13: 00000000ffffffff R14: ffff880196db6c50 R15: 0000000000020101 refcount_add+0x1b/0x70 lib/refcount.c:102 __udp_gso_segment+0xaa5/0xee0 net/ipv4/udp_offload.c:272 udp4_ufo_fragment+0x592/0x7a0 net/ipv4/udp_offload.c:301 inet_gso_segment+0x639/0x12b0 net/ipv4/af_inet.c:1342 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 __skb_gso_segment+0x3bb/0x870 net/core/dev.c:2865 skb_gso_segment include/linux/netdevice.h:4050 [inline] validate_xmit_skb+0x54d/0xd90 net/core/dev.c:3122 __dev_queue_xmit+0xbf8/0x34c0 net/core/dev.c:3579 dev_queue_xmit+0x17/0x20 net/core/dev.c:3620 neigh_direct_output+0x15/0x20 net/core/neighbour.c:1401 neigh_output include/net/neighbour.h:483 [inline] ip_finish_output2+0xa5f/0x1840 net/ipv4/ip_output.c:229 ip_finish_output+0x828/0xf80 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:277 [inline] ip_output+0x21b/0x850 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:444 [inline] ip_local_out+0xc5/0x1b0 net/ipv4/ip_output.c:124 ip_send_skb+0x40/0xe0 net/ipv4/ip_output.c:1434 udp_send_skb.isra.37+0x5eb/0x1000 net/ipv4/udp.c:825 udp_push_pending_frames+0x5c/0xf0 net/ipv4/udp.c:853 udp_v6_push_pending_frames+0x380/0x3e0 net/ipv6/udp.c:1105 udp_lib_setsockopt+0x59a/0x600 net/ipv4/udp.c:2403 udpv6_setsockopt+0x95/0xa0 net/ipv6/udp.c:1447 sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3046 __sys_setsockopt+0x1bd/0x390 net/socket.c:1903 __do_sys_setsockopt net/socket.c:1914 [inline] __se_sys_setsockopt net/socket.c:1911 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: ad405857b174 ("udp: better wmem accounting on gso") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-09udp: Do not copy destructor if one is not presentAlexander Duyck1-8/+14
This patch makes it so that if a destructor is not present we avoid trying to update the skb socket or any reference counting that would be associated with the NULL socket and/or descriptor. By doing this we can support traffic coming from another namespace without any issues. Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-09udp: Add support for software checksum and GSO_PARTIAL with GSO offloadAlexander Duyck1-10/+19
This patch adds support for a software provided checksum and GSO_PARTIAL segmentation support. With this we can offload UDP segmentation on devices that only have partial support for tunnels. Since we are no longer needing the hardware checksum we can drop the checks in the segmentation code that were verifying if it was present. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-09udp: Partially unroll handling of first segment and last segmentAlexander Duyck1-14/+19
This patch allows us to take care of unrolling the first segment and the last segment of the loop for processing the segmented skb. Part of the motivation for this is that it makes it easier to process the fact that the first fame and all of the frames in between should be mostly identical in terms of header data, and the last frame has differences in the length and partial checksum. In addition I am dropping the header length calculation since we don't really need it for anything but the last frame and it can be easily obtained by just pulling the data_len and offset of tail from the transport header. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-09udp: Do not pass checksum as a parameter to GSO segmentationAlexander Duyck1-14/+18
This patch is meant to allow us to avoid having to recompute the checksum from scratch and have it passed as a parameter. Instead of taking that approach we can take advantage of the fact that the length that was used to compute the existing checksum is included in the UDP header. Finally to avoid the need to invert the result we can just call csum16_add and csum16_sub directly. By doing this we can avoid a number of instructions in the loop that is handling segmentation. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-09udp: Do not pass MSS as parameter to GSO segmentationAlexander Duyck1-2/+4
There is no point in passing MSS as a parameter for for the GSO segmentation call as it is already available via the shared info for the skb itself. Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02udp: Complement partial checksum for GSO packetSean Tranchetti1-0/+1
Using the udp_v4_check() function to calculate the pseudo header for the newly segmented UDP packets results in assigning the complement of the value to the UDP header checksum field. Always undo the complement the partial checksum value in order to match the case where GSO is not used on the UDP transmit path. Fixes: ee80d1ebe5ba ("udp: add udp gso") Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-28udp: remove stray export symbolWillem de Bruijn1-1/+0
UDP GSO needs to export __udp_gso_segment to call it from ipv6. I accidentally exported static ipv4 function __udp4_gso_segment. Remove that EXPORT_SYMBOL_GPL. Fixes: ee80d1ebe5ba ("udp: add udp gso") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-26udp: better wmem accounting on gsoWillem de Bruijn1-1/+15
skb_segment by default transfers allocated wmem from the gso skb to the tail of the segment list. This underreports real truesize of the list, especially if the tail might be dropped. Similar to tcp_gso_segment, update wmem_alloc with the aggregate list truesize and make each segment responsible for its own share by setting skb->destructor. Clear gso_skb->destructor prior to calling skb_segment to skip the default assignment to tail. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-26udp: add udp gsoWillem de Bruijn1-1/+52
Implement generic segmentation offload support for udp datagrams. A follow-up patch adds support to the protocol stack to generate such packets. UDP GSO is not UFO. UFO fragments a single large datagram. GSO splits a large payload into a number of discrete UDP datagrams. The implementation adds a GSO type SKB_UDP_GSO_L4 to differentiate it from UFO (SKB_UDP_GSO). IPPROTO_UDPLITE is excluded, as that protocol has no gso handler registered. [ Export __udp_gso_segment for ipv6. -DaveM ] Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23gso: validate gso_type in GSO handlersWillem de Bruijn1-0/+3
Validate gso_type during segmentation as SKB_GSO_DODGY sources may pass packets where the gso_type does not match the contents. Syzkaller was able to enter the SCTP gso handler with a packet of gso_type SKB_GSO_TCPV4. On entry of transport layer gso handlers, verify that the gso_type matches the transport protocol. Fixes: 90017accff61 ("sctp: Add GSO support") Link: http://lkml.kernel.org/r/<001a1137452496ffc305617e5fe0@google.com> Reported-by: syzbot+fee64147a25aecd48055@syzkaller.appspotmail.com Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-23net: accept UFO datagrams from tuntap and packetWillem de Bruijn1-4/+45
Tuntap and similar devices can inject GSO packets. Accept type VIRTIO_NET_HDR_GSO_UDP, even though not generating UFO natively. Processes are expected to use feature negotiation such as TUNSETOFFLOAD to detect supported offload types and refrain from injecting other packets. This process breaks down with live migration: guest kernels do not renegotiate flags, so destination hosts need to expose all features that the source host does. Partially revert the UFO removal from 182e0b6b5846~1..d9d30adf5677. This patch introduces nearly(*) no new code to simplify verification. It brings back verbatim tuntap UFO negotiation, VIRTIO_NET_HDR_GSO_UDP insertion and software UFO segmentation. It does not reinstate protocol stack support, hardware offload (NETIF_F_UFO), SKB_GSO_UDP tunneling in SKB_GSO_SOFTWARE or reception of VIRTIO_NET_HDR_GSO_UDP packets in tuntap. To support SKB_GSO_UDP reappearing in the stack, also reinstate logic in act_csum and openvswitch. Achieve equivalence with v4.13 HEAD by squashing in commit 939912216fa8 ("net: skb_needs_check() removes CHECKSUM_UNNECESSARY check for tx.") and reverting commit 8d63bee643f1 ("net: avoid skb_warn_bad_offload false positives on UFO"). (*) To avoid having to bring back skb_shinfo(skb)->ip6_frag_id, ipv6_proxy_select_ident is changed to return a __be32 and this is assigned directly to the frag_hdr. Also, SKB_GSO_UDP is inserted at the end of the enum to minimize code churn. Tested Booted a v4.13 guest kernel with QEMU. On a host kernel before this patch `ethtool -k eth0` shows UFO disabled. After the patch, it is enabled, same as on a v4.13 host kernel. A UFO packet sent from the guest appears on the tap device: host: nc -l -p -u 8000 & tcpdump -n -i tap0 guest: dd if=/dev/zero of=payload.txt bs=1 count=2000 nc -u 192.16.1.1 8000 < payload.txt Direct tap to tap transmission of VIRTIO_NET_HDR_GSO_UDP succeeds, packets arriving fragmented: ./with_tap_pair.sh ./tap_send_ufo tap0 tap1 (from https://github.com/wdebruij/kerneltools/tree/master/tests) Changes v1 -> v2 - simplified set_offload change (review comment) - documented test procedure Link: http://lkml.kernel.org/r/<CAF=yD-LuUeDuL9YWPJD9ykOZ0QCjNeznPDr6whqZ9NGMNF12Mw@mail.gmail.com> Fixes: fb652fdfe837 ("macvlan/macvtap: Remove NETIF_F_UFO advertisement.") Reported-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-08gso: fix payload length when gso_size is zeroAlexey Kodanev1-1/+1
When gso_size reset to zero for the tail segment in skb_segment(), later in ipv6_gso_segment(), __skb_udp_tunnel_segment() and gre_gso_segment() we will get incorrect results (payload length, pcsum) for that segment. inet_gso_segment() already has a check for gso_size before calculating payload. The issue was found with LTP vxlan & gre tests over ixgbe NIC. Fixes: 07b26c9454a2 ("gso: Support partial splitting at the frag_list pointer") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-17inet: Remove software UFO fragmenting code.David S. Miller1-54/+4
Rename udp{4,6}_ufo_fragment() to udp{4,6}_tunnel_segment() and only handle tunnel segmentation. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-17net: Remove all references to SKB_GSO_UDP.David S. Miller1-4/+2
Such packets are no longer possible. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24udp: disable inner UDP checksum offloads in IPsec caseAnsis Atteka1-0/+3
Otherwise, UDP checksum offloads could corrupt ESP packets by attempting to calculate UDP checksum when this inner UDP packet is already protected by IPsec. One way to reproduce this bug is to have a VM with virtio_net driver (UFO set to ON in the guest VM); and then encapsulate all guest's Ethernet frames in Geneve; and then further encrypt Geneve with IPsec. In this case following symptoms are observed: 1. If using ixgbe NIC, then it will complain with following error message: ixgbe 0000:01:00.1: partial checksum but l4 proto=32! 2. Receiving IPsec stack will drop all the corrupted ESP packets and increase XfrmInStateProtoError counter in /proc/net/xfrm_stat. 3. iperf UDP test from the VM with packet sizes above MTU will not work at all. 4. iperf TCP test from the VM will get ridiculously low performance because. Signed-off-by: Ansis Atteka <aatteka@ovn.org> Co-authored-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: add recursion limit to GROSabrina Dubroca1-1/+1
Currently, GRO can do unlimited recursion through the gro_receive handlers. This was fixed for tunneling protocols by limiting tunnel GRO to one level with encap_mark, but both VLAN and TEB still have this problem. Thus, the kernel is vulnerable to a stack overflow, if we receive a packet composed entirely of VLAN headers. This patch adds a recursion counter to the GRO layer to prevent stack overflow. When a gro_receive function hits the recursion limit, GRO is aborted for this skb and it is processed normally. This recursion counter is put in the GRO CB, but could be turned into a percpu counter if we run out of space in the CB. Thanks to Vladimír Beneš <vbenes@redhat.com> for the initial bug report. Fixes: CVE-2016-7039 Fixes: 9b174d88c257 ("net: Add Transparent Ethernet Bridging GRO support.") Fixes: 66e5133f19e9 ("vlan: Add GRO support for non hardware accelerated vlan") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Jiri Benc <jbenc@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20gso: Support partial splitting at the frag_list pointerSteffen Klassert1-2/+4
Since commit 8a29111c7 ("net: gro: allow to build full sized skb") gro may build buffers with a frag_list. This can hurt forwarding because most NICs can't offload such packets, they need to be segmented in software. This patch splits buffers with a frag_list at the frag_list pointer into buffers that can be TSO offloaded. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-21gso: Remove arbitrary checks for unsupported GSOTom Herbert1-10/+0
In several gso_segment functions there are checks of gso_type against a seemingly arbitrary list of SKB_GSO_* flags. This seems like an attempt to identify unsupported GSO types, but since the stack is the one that set these GSO types in the first place this seems unnecessary to do. If a combination isn't valid in the first place that stack should not allow setting it. This is a code simplication especially for add new GSO types. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+5
In netdevice.h we removed the structure in net-next that is being changes in 'net'. In macsec.c and rtnetlink.c we have overlaps between fixes in 'net' and the u64 attribute changes in 'net-next'. The mlx5 conflicts have to do with vxlan support dependencies. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-07udp_offload: Set encapsulation before inner completes.Jarno Rajahalme1-3/+5
UDP tunnel segmentation code relies on the inner offsets being set for an UDP tunnel GSO packet, but the inner *_complete() functions will set the inner offsets only if 'encapsulation' is set before calling them. Currently, udp_gro_complete() sets 'encapsulation' only after the inner *_complete() functions are done. This causes the inner offsets having invalid values after udp_gro_complete() returns, which in turn will make it impossible to properly segment the packet in case it needs to be forwarded, which would be visible to the user either as invalid packets being sent or as packet loss. This patch fixes this by setting skb's 'encapsulation' in udp_gro_complete() before calling into the inner complete functions, and by making each possible UDP tunnel gro_complete() callback set the inner_mac_header to the beginning of the tunnel payload. Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Reviewed-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-05 03:17:50 +0300