summaryrefslogtreecommitdiff
path: root/net/ethtool/linkmodes.c
AgeCommit message (Collapse)AuthorFilesLines
2021-02-04ethtool: Expose the number of lanes in useDanielle Ratson1-0/+8
Currently, ethtool does not expose how many lanes are used when the link is up. After adding a possibility to advertise or force a specific number of lanes, the lanes in use value can be either the maximum width of the port or below. Extend ethtool to expose the number of lanes currently in use for drivers that support it. For example: $ ethtool -s swp1 speed 100000 lanes 4 $ ethtool -s swp2 speed 100000 lanes 4 $ ip link set swp1 up $ ip link set swp2 up $ ethtool swp1 Settings for swp1: Supported ports: [ FIBRE Backplane ] Supported link modes: 1000baseT/Full 10000baseT/Full 1000baseKX/Full 10000baseKR/Full 10000baseR_FEC 40000baseKR4/Full 40000baseCR4/Full 40000baseSR4/Full 40000baseLR4/Full 25000baseCR/Full 25000baseKR/Full 25000baseSR/Full 50000baseCR2/Full 50000baseKR2/Full 100000baseKR4/Full 100000baseSR4/Full 100000baseCR4/Full 100000baseLR4_ER4/Full 50000baseSR2/Full 10000baseCR/Full 10000baseSR/Full 10000baseLR/Full 10000baseER/Full 50000baseKR/Full 50000baseSR/Full 50000baseCR/Full 50000baseLR_ER_FR/Full 50000baseDR/Full 100000baseKR2/Full 100000baseSR2/Full 100000baseCR2/Full 100000baseLR2_ER2_FR2/Full 100000baseDR2/Full 200000baseKR4/Full 200000baseSR4/Full 200000baseLR4_ER4_FR4/Full 200000baseDR4/Full 200000baseCR4/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 1000baseT/Full 10000baseT/Full 1000baseKX/Full 1000baseKX/Full 10000baseKR/Full 10000baseR_FEC 40000baseKR4/Full 40000baseCR4/Full 40000baseSR4/Full 40000baseLR4/Full 25000baseCR/Full 25000baseKR/Full 25000baseSR/Full 50000baseCR2/Full 50000baseKR2/Full 100000baseKR4/Full 100000baseSR4/Full 100000baseCR4/Full 100000baseLR4_ER4/Full 50000baseSR2/Full 10000baseCR/Full 10000baseSR/Full 10000baseLR/Full 10000baseER/Full 200000baseKR4/Full 200000baseSR4/Full 200000baseLR4_ER4_FR4/Full 200000baseDR4/Full 200000baseCR4/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Advertised link modes: 100000baseKR4/Full 100000baseSR4/Full 100000baseCR4/Full 100000baseLR4_ER4/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Speed: 100000Mb/s Lanes: 4 Duplex: Full Auto-negotiation: on Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Link detected: yes Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04ethtool: Get link mode in use instead of speed and duplex parametersDanielle Ratson1-155/+2
Currently, when user space queries the link's parameters, as speed and duplex, each parameter is passed from the driver to ethtool. Instead, get the link mode bit in use, and derive each of the parameters from it in ethtool. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04ethtool: Extend link modes settings uAPI with lanesDanielle Ratson1-15/+81
Currently, when auto negotiation is on, the user can advertise all the linkmodes which correspond to a specific speed, but does not have a similar selector for the number of lanes. This is significant when a specific speed can be achieved using different number of lanes. For example, 2x50 or 4x25. Add 'ETHTOOL_A_LINKMODES_LANES' attribute and expand 'struct ethtool_link_settings' with lanes field in order to implement a new lanes-selector that will enable the user to advertise a specific number of lanes as well. When auto negotiation is off, lanes parameter can be forced only if the driver supports it. Add a capability bit in 'struct ethtool_ops' that allows ethtool know if the driver can handle the lanes parameter when auto negotiation is off, so if it does not, an error message will be returned when trying to set lanes. Example: $ ethtool -s swp1 lanes 4 $ ethtool swp1 Settings for swp1: Supported ports: [ FIBRE ] Supported link modes: 1000baseKX/Full 10000baseKR/Full 40000baseCR4/Full 40000baseSR4/Full 40000baseLR4/Full 25000baseCR/Full 25000baseSR/Full 50000baseCR2/Full 100000baseSR4/Full 100000baseCR4/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 40000baseCR4/Full 40000baseSR4/Full 40000baseLR4/Full 100000baseSR4/Full 100000baseCR4/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Speed: Unknown! Duplex: Unknown! (255) Auto-negotiation: on Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Link detected: no Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04ethtool: Validate master slave configuration before rtnl_lock()Danielle Ratson1-8/+19
Create a new function for input validations to be called before rtnl_lock() and move the master slave validation to that function. This would be a cleanup for next patch that would add another validation to the new function. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-06ethtool: link up ethnl_header_policy as a nested policyJakub Kicinski1-2/+4
To get the most out of parsing by the core, and to allow dumping full policies we need to specify which policy applies to nested attrs. For headers it's ethnl_header_policy. $ sed -i 's@\(ETHTOOL_A_.*HEADER\].*=\) { .type = NLA_NESTED },@\1\n\t\tNLA_POLICY_NESTED(ethnl_header_policy),@' net/ethtool/* Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-06ethtool: trim policy tablesJakub Kicinski1-15/+2
Since ethtool uses strict attribute validation there's no need to initialize all attributes in policy tables. 0 is NLA_UNSPEC which is going to be rejected. Remove the NLA_REJECTs. Similarly attributes above maxattrs are rejected, so there's no need to always size the policy tables to ETHTOOL_A_..._MAX. v2: - new patch Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-06ethtool: wire up set policies to opsJakub Kicinski1-8/+3
Similarly to get commands wire up the policies of set commands to get parsing by the core and policy dumps. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-06ethtool: wire up get policies to opsJakub Kicinski1-4/+2
Wire up policies for get commands in struct nla_policy of the ethtool family. Make use of genetlink code attr validation and parsing, as well as allow dumping policies to user space. For every ETHTOOL_MSG_*_GET: - add 'ethnl_' prefix to policy name - add extern declaration in net/ethtool/netlink.h - wire up the policy & attr in ethtool_genl_ops[]. - remove .request_policy and .max_attr from ethnl_request_ops. Obviously core only records the first "layer" of parsed attrs so we still need to parse the sub-attrs of the nested header attribute. v2: - merge of patches 1 and 2 from v1 - remove stray empty lines in ops - also remove .max_attr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20ethtool: Add 100base-FX link mode entriesDan Murphy1-0/+2
Add entries for the 100base-FX full and half duplex supported modes. $ ethtool eth0 Supported ports: [ FIBRE ] Supported link modes: 100baseFX/Half 100baseFX/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 100baseFX/Half 100baseFX/Full Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 100Mb/s Duplex: Full Auto-negotiation: off Port: MII PHYAD: 1 Transceiver: external Supports Wake-on: gs Wake-on: d SecureOn password: 00:00:00:00:00:00 Current message level: 0x00000000 (0) Link detected: yes Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-04ethtool: ethnl_set_linkmodes: remove redundant null checkGaurav Singh1-2/+1
info cannot be NULL here since its being accessed earlier in the function: nlmsg_parse(info->nlhdr...). Remove this redundant NULL check. Signed-off-by: Gaurav Singh <gaurav1086@gmail.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09ethtool: Add support for 100Gbps per lane link modesMeir Lichtinger1-0/+15
Define 100G, 200G and 400G link modes using 100Gbps per lane LR, ER and FR are defined as a single link mode because they are using same technology and by design are fully interoperable. EEPROM content indicates if the module is LR, ER, or FR, and the user space ethtool decoder is planned to support decoding these modes in the EEPROM. Signed-off-by: Meir Lichtinger <meirl@mellanox.com> CC: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-07ethtool: provide UAPI for PHY master/slave configuration.Oleksij Rempel1-0/+53
This UAPI is needed for BroadR-Reach 100BASE-T1 devices. Due to lack of auto-negotiation support, we needed to be able to configure the MASTER-SLAVE role of the port manually or from an application in user space. The same UAPI can be used for 1000BASE-T or MultiGBASE-T devices to force MASTER or SLAVE role. See IEEE 802.3-2018: 22.2.4.3.7 MASTER-SLAVE control register (Register 9) 22.2.4.3.8 MASTER-SLAVE status register (Register 10) 40.5.2 MASTER-SLAVE configuration resolution 45.2.1.185.1 MASTER-SLAVE config value (1.2100.14) 45.2.7.10 MultiGBASE-T AN control 1 register (Register 7.32) The MASTER-SLAVE role affects the clock configuration: ------------------------------------------------------------------------------- When the PHY is configured as MASTER, the PMA Transmit function shall source TX_TCLK from a local clock source. When configured as SLAVE, the PMA Transmit function shall source TX_TCLK from the clock recovered from data stream provided by MASTER. iMX6Q KSZ9031 XXX ------\ /-----------\ /------------\ | | | | | MAC |<----RGMII----->| PHY Slave |<------>| PHY Master | |<--- 125 MHz ---+-<------/ | | \ | ------/ \-----------/ \------------/ ^ \-TX_TCLK ------------------------------------------------------------------------------- Since some clock or link related issues are only reproducible in a specific MASTER-SLAVE-role, MAC and PHY configuration, it is beneficial to provide generic (not 100BASE-T1 specific) interface to the user space for configuration flexibility and trouble shooting. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+3
Overlapping header include additions in macsec.c A bug fix in 'net' overlapping with the removal of 'version' string in ena_netdev.c Overlapping test additions in selftests Makefile Overlapping PCI ID table adjustments in iwlwifi driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-24ethtool: fix reference leak in some *_SET handlersMichal Kubecek1-1/+3
Andrew noticed that some handlers for *_SET commands leak a netdev reference if required ethtool_ops callbacks do not exist. A simple reproducer would be e.g. ip link add veth1 type veth peer name veth2 ethtool -s veth1 wol g ip link del veth1 Make sure dev_put() is called when ethtool_ops check fails. v2: add Fixes tags Fixes: a53f3d41e4d3 ("ethtool: set link settings with LINKINFO_SET request") Fixes: bfbcfe2032e7 ("ethtool: set link modes related data with LINKMODES_SET request") Fixes: e54d04e3afea ("ethtool: set message mask with DEBUG_SET request") Fixes: 8d425b19b305 ("ethtool: set wake-on-lan settings with WOL_SET request") Reported-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-13ethtool: rename ethnl_parse_header() to ethnl_parse_header_dev_get()Michal Kubecek1-2/+4
Andrew Lunn pointed out that even if it's documented that ethnl_parse_header() takes reference to network device if it fills it into the target structure, its name doesn't make it apparent so that corresponding dev_put() looks like mismatched. Rename the function ethnl_parse_header_dev_get() to indicate that it takes a reference. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19ethtool: Add support for low latency RS FECAya Levin1-0/+1
Add support for low latency Reed Solomon FEC as LLRS. The LL-FEC is defined by the 25G/50G ethernet consortium, in the document titled "Low Latency Reed Solomon Forward Error Correction" Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> CC: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
2020-01-03ethtool: remove set but not used variable 'lsettings'YueHaibing1-2/+0
Fixes gcc '-Wunused-but-set-variable' warning: net/ethtool/linkmodes.c: In function 'ethnl_set_linkmodes': net/ethtool/linkmodes.c:326:32: warning: variable 'lsettings' set but not used [-Wunused-but-set-variable] struct ethtool_link_settings *lsettings; ^ It is never used, so remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-28ethtool: add LINKMODES_NTF notificationMichal Kubecek1-0/+2
Send ETHTOOL_MSG_LINKMODES_NTF notification message whenever device link settings or advertised modes are modified using ETHTOOL_MSG_LINKMODES_SET netlink message or ETHTOOL_SLINKSETTINGS or ETHTOOL_SSET ioctl commands. The notification message has the same format as reply to LINKMODES_GET request. ETHTOOL_MSG_LINKMODES_SET netlink request only triggers the notification if there is a change but the ioctl command handlers do not check if there is an actual change and trigger the notification whenever the commands are executed. As all work is done by ethnl_default_notify() handler and callback functions introduced to handle LINKMODES_GET requests, all that remains is adding entries for ETHTOOL_MSG_LINKMODES_NTF into ethnl_notify_handlers and ethnl_default_notify_ops lookup tables and calls to ethtool_notify() where needed. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-28ethtool: set link modes related data with LINKMODES_SET requestMichal Kubecek1-0/+235
Implement LINKMODES_SET netlink request to set advertised linkmodes and related attributes as ETHTOOL_SLINKSETTINGS and ETHTOOL_SSET commands do. The request allows setting autonegotiation flag, speed, duplex and advertised link modes. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-28ethtool: provide link mode information with LINKMODES_GET requestMichal Kubecek1-0/+140
Implement LINKMODES_GET netlink request to get link modes related information provided by ETHTOOL_GLINKSETTINGS and ETHTOOL_GSET ioctl commands. This request provides supported, advertised and peer advertised link modes, autonegotiation flag, speed and duplex. LINKMODES_GET request can be used with NLM_F_DUMP (without device identification) to request the information for all devices in current network namespace providing the data. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-14 04:06:08 +0300