| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Xin Long says:
On udp rx path udp_rcv_segment() may do segment where the frag skbs
will get the header copied from the head skb in skb_segment_list()
by calling __copy_skb_header(), which could overwrite the frag skbs'
extensions by __skb_ext_copy() and cause a leak.
This issue was found after loading esp_offload where a sec path ext
is set in the skb.
Fix this by discarding head state of the fraglist skb before replacing
its contents.
Fixes: 3a1296a38d0cf62 ("net: Support GRO/GSO fraglist chaining.")
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Reported-by: Xiumei Mu <xmu@redhat.com>
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add three string sets related to timestamping information:
ETH_SS_SOF_TIMESTAMPING: SOF_TIMESTAMPING_* flags
ETH_SS_TS_TX_TYPES: timestamping Tx types
ETH_SS_TS_RX_FILTERS: timestamping Rx filters
These will be used for TIMESTAMP_GET request.
v2: avoid compiler warning ("enumeration value not handled in switch")
in net_hwtstamp_validate()
v3: omit dash in Tx type names ("one-step-*" -> "onestep-*"), suggested by
Richard Cochran
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds functionality to configure routes for RPL source routing
functionality. There is no IPIP functionality yet implemented which can
be added later when the cases when to use IPv6 encapuslation comes more
clear.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The build_state callback of lwtunnel doesn't contain the net namespace
structure yet. This patch will add it so we can check on specific
address configuration at creation time of rpl source routes.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The SKB_SGO_CB_OFFSET should be SKB_GSO_CB_OFFSET which means the
offset of the GSO in skb cb. This patch fixes the typo.
Fixes: 9207f9d45b0a ("net: preserve IP control block during GSO segmentation")
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
page pool API can be useful for non-DMA cases like
xen-netfront driver so let's allow to pass zero flags to
page pool flags.
v2: check DMA direction only if PP_FLAG_DMA_MAP is set
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While it is currently possible for userspace to specify that an existing
XDP program should not be replaced when attaching to an interface, there is
no mechanism to safely replace a specific XDP program with another.
This patch adds a new netlink attribute, IFLA_XDP_EXPECTED_FD, which can be
set along with IFLA_XDP_FD. If set, the kernel will check that the program
currently loaded on the interface matches the expected one, and fail the
operation if it does not. This corresponds to a 'cmpxchg' memory operation.
Setting the new attribute with a negative value means that no program is
expected to be attached, which corresponds to setting the UPDATE_IF_NOEXIST
flag.
A new companion flag, XDP_FLAGS_REPLACE, is also added to explicitly
request checking of the EXPECTED_FD attribute. This is needed for userspace
to discover whether the kernel supports the new attribute.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/158515700640.92963.3551295145441017022.stgit@toke.dk
|
|
We already have the bpf_get_current_uid_gid() helper enabled, and
given we now have perf event RB output available for connect(),
sendmsg(), recvmsg() and bind-related hooks, add a trivial change
to enable bpf_get_current_pid_tgid() and bpf_get_current_comm()
as well.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/18744744ed93c06343be8b41edcfd858706f39d7.1585323121.git.daniel@iogearbox.net
|
|
Enable the bpf_get_current_cgroup_id() helper for connect(), sendmsg(),
recvmsg() and bind-related hooks in order to retrieve the cgroup v2
context which can then be used as part of the key for BPF map lookups,
for example. Given these hooks operate in process context 'current' is
always valid and pointing to the app that is performing mentioned
syscalls if it's subject to a v2 cgroup. Also with same motivation of
commit 7723628101aa ("bpf: Introduce bpf_skb_ancestor_cgroup_id helper")
enable retrieval of ancestor from current so the cgroup id can be used
for policy lookups which can then forbid connect() / bind(), for example.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/d2a7ef42530ad299e3cbb245e6c12374b72145ef.1585323121.git.daniel@iogearbox.net
|
|
Today, Kubernetes is still operating on cgroups v1, however, it is
possible to retrieve the task's classid based on 'current' out of
connect(), sendmsg(), recvmsg() and bind-related hooks for orchestrators
which attach to the root cgroup v2 hook in a mixed env like in case
of Cilium, for example, in order to then correlate certain pod traffic
and use it as part of the key for BPF map lookups.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/555e1c69db7376c0947007b4951c260e1074efc3.1585323121.git.daniel@iogearbox.net
|
|
In Cilium we're mainly using BPF cgroup hooks today in order to implement
kube-proxy free Kubernetes service translation for ClusterIP, NodePort (*),
ExternalIP, and LoadBalancer as well as HostPort mapping [0] for all traffic
between Cilium managed nodes. While this works in its current shape and avoids
packet-level NAT for inter Cilium managed node traffic, there is one major
limitation we're facing today, that is, lack of netns awareness.
In Kubernetes, the concept of Pods (which hold one or multiple containers)
has been built around network namespaces, so while we can use the global scope
of attaching to root BPF cgroup hooks also to our advantage (e.g. for exposing
NodePort ports on loopback addresses), we also have the need to differentiate
between initial network namespaces and non-initial one. For example, ExternalIP
services mandate that non-local service IPs are not to be translated from the
host (initial) network namespace as one example. Right now, we have an ugly
work-around in place where non-local service IPs for ExternalIP services are
not xlated from connect() and friends BPF hooks but instead via less efficient
packet-level NAT on the veth tc ingress hook for Pod traffic.
On top of determining whether we're in initial or non-initial network namespace
we also have a need for a socket-cookie like mechanism for network namespaces
scope. Socket cookies have the nice property that they can be combined as part
of the key structure e.g. for BPF LRU maps without having to worry that the
cookie could be recycled. We are planning to use this for our sessionAffinity
implementation for services. Therefore, add a new bpf_get_netns_cookie() helper
which would resolve both use cases at once: bpf_get_netns_cookie(NULL) would
provide the cookie for the initial network namespace while passing the context
instead of NULL would provide the cookie from the application's network namespace.
We're using a hole, so no size increase; the assignment happens only once.
Therefore this allows for a comparison on initial namespace as well as regular
cookie usage as we have today with socket cookies. We could later on enable
this helper for other program types as well as we would see need.
(*) Both externalTrafficPolicy={Local|Cluster} types
[0] https://github.com/cilium/cilium/blob/master/bpf/bpf_sock.c
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/c47d2346982693a9cf9da0e12690453aded4c788.1585323121.git.daniel@iogearbox.net
|
|
Currently, connect(), sendmsg(), recvmsg() and bind-related hooks
are all lacking perf event rb output in order to push notifications
or monitoring events up to user space. Back in commit a5a3a828cd00
("bpf: add perf event notificaton support for sock_ops"), I've worked
with Sowmini to enable them for sock_ops where the context part is
not used (as opposed to skbs for example where the packet data can
be appended). Make the bpf_sockopt_event_output() helper generic and
enable it for mentioned hooks.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/69c39daf87e076b31e52473c902e9bfd37559124.1585323121.git.daniel@iogearbox.net
|
|
We currently make heavy use of the socket cookie in BPF's connect(),
sendmsg() and recvmsg() hooks for load-balancing decisions. However,
it is currently not enabled/implemented in BPF {post-}bind hooks
where it can later be used in combination for correlation in the tc
egress path, for example.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/e9d71f310715332f12d238cc650c1edc5be55119.1585323121.git.daniel@iogearbox.net
|
|
The indirect block setup should use TC_SETUP_FT as the type instead of
TC_SETUP_BLOCK. Adjust existing users of the indirect flow block
infrastructure.
Fixes: b5140a36da78 ("netfilter: flowtable: add indr block setup support")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Implement support for the DEVLINK_CMD_REGION_NEW command for creating
snapshots. This new command parallels the existing
DEVLINK_CMD_REGION_DEL.
In order for DEVLINK_CMD_REGION_NEW to work for a region, the new
".snapshot" operation must be implemented in the region's ops structure.
The desired snapshot id must be provided. This helps avoid confusion on
the purpose of DEVLINK_CMD_REGION_NEW, and keeps the API simpler.
The requested id will be inserted into the xarray tracking the number of
snapshots using each id. If this id is already used by another snapshot
on any region, an error will be returned.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Each snapshot created for a devlink region must have an id. These ids
are supposed to be unique per "event" that caused the snapshot to be
created. Drivers call devlink_region_snapshot_id_get to obtain a new id
to use for a new event trigger. The id values are tracked per devlink,
so that the same id number can be used if a triggering event creates
multiple snapshots on different regions.
There is no mechanism for snapshot ids to ever be reused. Introduce an
xarray to store the count of how many snapshots are using a given id,
replacing the snapshot_id field previously used for picking the next id.
The devlink_region_snapshot_id_get() function will use xa_alloc to
insert an initial value of 1 value at an available slot between 0 and
U32_MAX.
The new __devlink_snapshot_id_increment() and
__devlink_snapshot_id_decrement() functions will be used to track how
many snapshots currently use an id.
Drivers must now call devlink_snapshot_id_put() in order to release
their reference of the snapshot id after adding region snapshots.
By tracking the total number of snapshots using a given id, it is
possible for the decrement() function to erase the id from the xarray
when it is not in use.
With this method, a snapshot id can become reused again once all
snapshots that referred to it have been deleted via
DEVLINK_CMD_REGION_DEL, and the driver has finished adding snapshots.
This work also paves the way to introduce a mechanism for userspace to
request a snapshot.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The devlink_snapshot_id_get() function returns a snapshot id. The
snapshot id is a u32, so there is no way to indicate an error code.
A future change is going to possibly add additional cases where this
function could fail. Refactor the function to return the snapshot id in
an argument, so that it can return zero or an error value.
This ensures that snapshot ids cannot be confused with error values, and
aids in the future refactor of snapshot id allocation management.
Because there is no current way to release previously used snapshot ids,
add a simple check ensuring that an error is reported in case the
snapshot_id would over flow.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A future change is going to implement a new devlink command to request
a snapshot on demand. As part of this, the logic for handling the
snapshot ids will be refactored. To simplify the snapshot id allocation
function, move it to a separate function prefixed by `__`. This helper
function will assume the lock is held.
While no other callers will exist, it simplifies refactoring the logic
because there is no need to complicate the function with gotos to handle
unlocking on failure.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The devlink_region_snapshot_create function returns -ENOMEM when the
maximum number of snapshots has been reached. This is confusing because
it is not an issue of being out of memory. Change this to use -ENOSPC
instead.
Reported-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A future change is going to add a new devlink command to request
a snapshot on demand. This function will want to call the
devlink_region_snapshot_create function while already holding the
devlink instance lock.
Extract the logic of this function into a static function prefixed by
`__` to indicate that it is an internal helper function. Modify the
original function to be implemented in terms of the new locked
function.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function documentation comment for devlink_region_snapshot_create
included a literal tab character between 'future analyses' that was
difficult to spot as it happened to only display as one space wide.
Fix the comment to use a space here instead of a stray tab appearing in
the middle of a sentence.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It does not makes sense that two snapshots for a given region would use
different destructors. Simplify snapshot creation by adding
a .destructor op for regions.
This operation will replace the data_destructor for the snapshot
creation, and makes snapshot creation easier.
Noticed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Modify the devlink region code in preparation for adding new operations
on regions.
Create a devlink_region_ops structure, and move the name pointer from
within the devlink_region structure into the ops structure (similar to
the devlink_health_reporter_ops).
This prepares the regions to enable support of additional operations in
the future such as requesting snapshots, or accessing the region
directly without a snapshot.
In order to re-use the constant strings in the mlx4 driver their
declaration must be changed to 'const char * const' to ensure the
compiler realizes that both the data and the pointer cannot change.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2020-03-25
1) Cleanups from Dan Carpenter and wenxu.
2) Paul and Roi, Some minor updates and fixes to E-Switch to address
issues introduced in the previous reg_c0 updates series.
3) Eli Cohen simplifies and improves flow steering matching group searches
and flow table entries version management.
4) Parav Pandit, improves devlink eswitch mode changes thread safety.
By making devlink rely on driver for thread safety and introducing mlx5
eswitch mode change protection.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
devlink_nl_cmd_eswitch_set_doit() doesn't hold devlink->lock mutex while
invoking driver callback. This is likely due to eswitch mode setting
involves adding/remove devlink ports, health reporters or
other devlink objects for a devlink device.
So it is driver responsiblity to ensure thread safe eswitch state
transition happening via either sriov legacy enablement or via devlink
eswitch set callback.
Therefore, get() callback should also be invoked without holding
devlink->lock mutex.
Vendor driver can use same internal lock which it uses during eswitch
mode set() callback.
This makes get() and set() implimentation symmetric in devlink core and
in vendor drivers.
Hence, remove holding devlink->lock mutex during eswitch get() callback.
Failing to do so results into below deadlock scenario when mlx5_core
driver is improved to handle eswitch mode set critical section invoked
by devlink and sriov sysfs interface in subsequent patch.
devlink_nl_cmd_eswitch_set_doit()
mlx5_eswitch_mode_set()
mutex_lock(esw->mode_lock) <- Lock A
[...]
register_devlink_port()
mutex_lock(&devlink->lock); <- lock B
mutex_lock(&devlink->lock); <- lock B
devlink_nl_cmd_eswitch_get_doit()
mlx5_eswitch_mode_get()
mutex_lock(esw->mode_lock) <- Lock A
In subsequent patch, mlx5_core driver uses its internal lock during
get() and set() eswitch callbacks.
Other drivers have been inspected which returns either constant during
get operations or reads the value from already allocated structure.
Hence it is safe to remove the lock in get( ) callback and let vendor
driver handle it.
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Overlapping header include additions in macsec.c
A bug fix in 'net' overlapping with the removal of 'version'
string in ena_netdev.c
Overlapping test additions in selftests Makefile
Overlapping PCI ID table adjustments in iwlwifi driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
net/netfilter/nft_fwd_netdev.c: In function ‘nft_fwd_netdev_eval’:
net/netfilter/nft_fwd_netdev.c:32:10: error: ‘struct sk_buff’ has no member named ‘tc_redirected’
pkt->skb->tc_redirected = 1;
^~
net/netfilter/nft_fwd_netdev.c:33:10: error: ‘struct sk_buff’ has no member named ‘tc_from_ingress’
pkt->skb->tc_from_ingress = 1;
^~
To avoid a direct dependency with tc actions from netfilter, wrap the
redirect bits around CONFIG_NET_REDIRECT and move helpers to
include/linux/skbuff.h. Turn on this toggle from the ifb driver, the
only existing client of these bits in the tree.
This patch adds skb_set_redirected() that sets on the redirected bit
on the skbuff, it specifies if the packet was redirect from ingress
and resets the timestamp (timestamp reset was originally missing in the
netfilter bugfix).
Fixes: bcfabee1afd99484 ("netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress")
Reported-by: noreply@ellerman.id.au
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TCP recvmsg() calls skb_copy_datagram_iter(), which
calls an indirect function (cb pointing to simple_copy_to_iter())
for every MSS (fragment) present in the skb.
CONFIG_RETPOLINE=y forces a very expensive operation
that we can avoid thanks to indirect call wrappers.
This patch gives a 13% increase of performance on
a single flow, if the bottleneck is the thread reading
the TCP socket.
Fixes: 950fcaecd5cc ("datagram: consolidate datagram copy to iter helpers")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Packet trap groups are now explicitly registered by drivers and not
implicitly registered when the packet traps are registered. Therefore,
there is no need to encode entire group structure the trap is associated
with inside the trap structure.
Instead, only pass the group identifier. Refer to it as initial group
identifier, as future patches will allow user space to move traps
between groups.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that drivers explicitly register their supported packet trap groups
there is no for devlink to create them on-demand and destroy them when
their reference count reaches zero.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, packet trap groups are implicitly registered by drivers upon
packet trap registration. When the traps are registered, each is
associated with a group and the group is created by devlink, if it does
not exist already.
This makes it difficult for drivers to pass additional attributes for
the groups.
Therefore, as a preparation for future patches that require passing
additional group attributes, add an API to explicitly register /
unregister these groups.
Next patches will convert existing drivers to use this API.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
checksumming
Problem:
TCP checksum in the output path is not being offloaded during GSO
in the following case:
The network driver does not support scatter-gather but supports
checksum offload with NETIF_F_HW_CSUM.
Cause:
skb_segment calls skb_copy_and_csum_bits if the network driver
does not announce NETIF_F_SG. It does not check if the driver
supports NETIF_F_HW_CSUM.
So for devices which might want to offload checksum but do not support SG
there is currently no way to do so if GSO is enabled.
Solution:
In skb_segment check if the network controller does checksum and if so
call skb_copy_bits instead of skb_copy_and_csum_bits.
Testing:
Without the patch, ran iperf TCP traffic with NETIF_F_HW_CSUM enabled
in the network driver. Observed the TCP checksum offload is not happening
since the skbs received by the driver in the output path have
skb->ip_summed set to CHECKSUM_NONE.
With the patch ran iperf TCP traffic and observed that TCP checksum
is being offloaded with skb->ip_summed set to CHECKSUM_PARTIAL.
Also tested with the patch by disabling NETIF_F_HW_CSUM in the driver
to cover the newly introduced if-else code path in skb_segment.
Link: https://lore.kernel.org/netdev/CA+FuTSeYGYr3Umij+Mezk9CUcaxYwqEe5sPSuXF8jPE2yMFJAw@mail.gmail.com
Signed-off-by: Yadu Kishore <kyk.segfault@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts the following commits:
8537f78647c0 ("netfilter: Introduce egress hook")
5418d3881e1f ("netfilter: Generalize ingress hook")
b030f194aed2 ("netfilter: Rename ingress hook include file")
>From the discussion in [0], the author's main motivation to add a hook
in fast path is for an out of tree kernel module, which is a red flag
to begin with. Other mentioned potential use cases like NAT{64,46}
is on future extensions w/o concrete code in the tree yet. Revert as
suggested [1] given the weak justification to add more hooks to critical
fast-path.
[0] https://lore.kernel.org/netdev/cover.1583927267.git.lukas@wunner.de/
[1] https://lore.kernel.org/netdev/20200318.011152.72770718915606186.davem@davemloft.net/
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Miller <davem@davemloft.net>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Nacked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Use nf_flow_offload_tuple() to fetch flow stats, from Paul Blakey.
2) Add new xt_IDLETIMER hard mode, from Manoj Basapathi.
Follow up patch to clean up this new mode, from Dan Carpenter.
3) Add support for geneve tunnel options, from Xin Long.
4) Make sets built-in and remove modular infrastructure for sets,
from Florian Westphal.
5) Remove unused TEMPLATE_NULLS_VAL, from Li RongQing.
6) Statify nft_pipapo_get, from Chen Wandun.
7) Use C99 flexible-array member, from Gustavo A. R. Silva.
8) More descriptive variable names for bitwise, from Jeremy Sowden.
9) Four patches to add tunnel device hardware offload to the flowtable
infrastructure, from wenxu.
10) pipapo set supports for 8-bit grouping, from Stefano Brivio.
11) pipapo can switch between nibble and byte grouping, also from
Stefano.
12) Add AVX2 vectorized version of pipapo, from Stefano Brivio.
13) Update pipapo to be use it for single ranges, from Stefano.
14) Add stateful expression support to elements via control plane,
eg. counter per element.
15) Re-visit sysctls in unprivileged namespaces, from Florian Westphal.
15) Add new egress hook, from Lukas Wunner.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There's a markup for link with is "foo_". On this kernel-doc
comment, we don't want this, but instead, place a literal
reference. So, escape the literal with ``foo``, in order to
avoid this warning:
./net/core/dev.c:5195: WARNING: Unknown target name: "page_is".
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that all in-tree drivers have been updated we can
make the supported_coalesce_params mandatory.
To save debugging time in case some driver was missed
(or is out of tree) add a warning when netdev is registered
with set_coalesce but without supported_coalesce_params.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit e687ad60af09 ("netfilter: add netfilter ingress hook after
handle_ing() under unique static key") introduced the ability to
classify packets on ingress.
Allow the same on egress. Position the hook immediately before a packet
is handed to tc and then sent out on an interface, thereby mirroring the
ingress order. This order allows marking packets in the netfilter
egress hook and subsequently using the mark in tc. Another benefit of
this order is consistency with a lot of existing documentation which
says that egress tc is performed after netfilter hooks.
Egress hooks already exist for the most common protocols, such as
NF_INET_LOCAL_OUT or NF_ARP_OUT, and those are to be preferred because
they are executed earlier during packet processing. However for more
exotic protocols, there is currently no provision to apply netfilter on
egress. A common workaround is to enslave the interface to a bridge and
use ebtables, or to resort to tc. But when the ingress hook was
introduced, consensus was that users should be given the choice to use
netfilter or tc, whichever tool suits their needs best:
https://lore.kernel.org/netdev/20150430153317.GA3230@salvia/
This hook is also useful for NAT46/NAT64, tunneling and filtering of
locally generated af_packet traffic such as dhclient.
There have also been occasional user requests for a netfilter egress
hook in the past, e.g.:
https://www.spinics.net/lists/netfilter/msg50038.html
Performance measurements with pktgen surprisingly show a speedup rather
than a slowdown with this commit:
* Without this commit:
Result: OK: 34240933(c34238375+d2558) usec, 100000000 (60byte,0frags)
2920481pps 1401Mb/sec (1401830880bps) errors: 0
* With this commit:
Result: OK: 33997299(c33994193+d3106) usec, 100000000 (60byte,0frags)
2941410pps 1411Mb/sec (1411876800bps) errors: 0
* Without this commit + tc egress:
Result: OK: 39022386(c39019547+d2839) usec, 100000000 (60byte,0frags)
2562631pps 1230Mb/sec (1230062880bps) errors: 0
* With this commit + tc egress:
Result: OK: 37604447(c37601877+d2570) usec, 100000000 (60byte,0frags)
2659259pps 1276Mb/sec (1276444320bps) errors: 0
* With this commit + nft egress:
Result: OK: 41436689(c41434088+d2600) usec, 100000000 (60byte,0frags)
2413320pps 1158Mb/sec (1158393600bps) errors: 0
Tested on a bare-metal Core i7-3615QM, each measurement was performed
three times to verify that the numbers are stable.
Commands to perform a measurement:
modprobe pktgen
echo "add_device lo@3" > /proc/net/pktgen/kpktgend_3
samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh -i 'lo@3' -n 100000000
Commands for testing tc egress:
tc qdisc add dev lo clsact
tc filter add dev lo egress protocol ip prio 1 u32 match ip dst 4.3.2.1/32
Commands for testing nft egress:
nft add table netdev t
nft add chain netdev t co \{ type filter hook egress device lo priority 0 \; \}
nft add rule netdev t co ip daddr 4.3.2.1/32 drop
All testing was performed on the loopback interface to avoid distorting
measurements by the packet handling in the low-level Ethernet driver.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Prepare for addition of a netfilter egress hook by generalizing the
ingress hook introduced by commit e687ad60af09 ("netfilter: add
netfilter ingress hook after handle_ing() under unique static key").
In particular, rename and refactor the ingress hook's static inlines
such that they can be reused for an egress hook.
No functional change intended.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Prepare for addition of a netfilter egress hook by renaming
<linux/netfilter_ingress.h> to <linux/netfilter_netdev.h>.
The egress hook also necessitates a refactoring of the include file,
but that is done in a separate commit to ease reviewing.
No functional change intended.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-03-13
The following pull-request contains BPF updates for your *net-next* tree.
We've added 86 non-merge commits during the last 12 day(s) which contain
a total of 107 files changed, 5771 insertions(+), 1700 deletions(-).
The main changes are:
1) Add modify_return attach type which allows to attach to a function via
BPF trampoline and is run after the fentry and before the fexit programs
and can pass a return code to the original caller, from KP Singh.
2) Generalize BPF's kallsyms handling and add BPF trampoline and dispatcher
objects to be visible in /proc/kallsyms so they can be annotated in
stack traces, from Jiri Olsa.
3) Extend BPF sockmap to allow for UDP next to existing TCP support in order
in order to enable this for BPF based socket dispatch, from Lorenz Bauer.
4) Introduce a new bpftool 'prog profile' command which attaches to existing
BPF programs via fentry and fexit hooks and reads out hardware counters
during that period, from Song Liu. Example usage:
bpftool prog profile id 337 duration 3 cycles instructions llc_misses
4228 run_cnt
3403698 cycles (84.08%)
3525294 instructions # 1.04 insn per cycle (84.05%)
13 llc_misses # 3.69 LLC misses per million isns (83.50%)
5) Batch of improvements to libbpf, bpftool and BPF selftests. Also addition
of a new bpf_link abstraction to keep in particular BPF tracing programs
attached even when the applicaion owning them exits, from Andrii Nakryiko.
6) New bpf_get_current_pid_tgid() helper for tracing to perform PID filtering
and which returns the PID as seen by the init namespace, from Carlos Neira.
7) Refactor of RISC-V JIT code to move out common pieces and addition of a
new RV32G BPF JIT compiler, from Luke Nelson.
8) Add gso_size context member to __sk_buff in order to be able to know whether
a given skb is GSO or not, from Willem de Bruijn.
9) Add a new bpf_xdp_output() helper which reuses XDP's existing perf RB output
implementation but can be called from tracepoint programs, from Eelco Chaudron.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adding bpf_trampoline_ name prefix for DECLARE_BPF_DISPATCHER,
so all the dispatchers have the common name prefix.
And also a small '_' cleanup for bpf_dispatcher_nopfunc function
name.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200312195610.346362-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2020-03-12
The following pull-request contains BPF updates for your *net* tree.
We've added 12 non-merge commits during the last 8 day(s) which contain
a total of 12 files changed, 161 insertions(+), 15 deletions(-).
The main changes are:
1) Andrii fixed two bugs in cgroup-bpf.
2) John fixed sockmap.
3) Luke fixed x32 jit.
4) Martin fixed two issues in struct_ops.
5) Yonghong fixed bpf_send_signal.
6) Yoshiki fixed BTF enum.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Minor overlapping changes, nothing serious.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce new helper that reuses existing xdp perf_event output
implementation, but can be called from raw_tracepoint programs
that receive 'struct xdp_buff *' as a tracepoint argument.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/158348514556.2239.11050972434793741444.stgit@xdp-tutorial
|
|
Add relevant getter for ct info dissector.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
|
|
This reverts commit 4cda75275f9f89f9485b0ca4d6950c95258a9bce
from net-next.
Brown bag time.
Michal noticed that this change doesn't work at all when
netif_set_real_num_tx_queues() gets called prior to an initial
dev_activate(), as for instance igb does.
Doing so dies with:
[ 40.579142] BUG: kernel NULL pointer dereference, address: 0000000000000400
[ 40.586922] #PF: supervisor read access in kernel mode
[ 40.592668] #PF: error_code(0x0000) - not-present page
[ 40.598405] PGD 0 P4D 0
[ 40.601234] Oops: 0000 [#1] PREEMPT SMP PTI
[ 40.605909] CPU: 18 PID: 1681 Comm: wickedd Tainted: G E 5.6.0-rc3-ethnl.50-default #1
[ 40.616205] Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.R3.27.D685.1305151734 05/15/2013
[ 40.627377] RIP: 0010:qdisc_hash_add.part.22+0x2e/0x90
[ 40.633115] Code: 00 55 53 89 f5 48 89 fb e8 2f 9b fb ff 85 c0 74 44 48 8b 43 40 48 8b 08 69 43 38 47 86 c8 61 c1 e8 1c 48 83 e8 80 48 8d 14 c1 <48> 8b 04 c1 48 8d 4b 28 48 89 53 30 48 89 43 28 48 85 c0 48 89 0a
[ 40.654080] RSP: 0018:ffffb879864934d8 EFLAGS: 00010203
[ 40.659914] RAX: 0000000000000080 RBX: ffffffffb8328d80 RCX: 0000000000000000
[ 40.667882] RDX: 0000000000000400 RSI: 0000000000000000 RDI: ffffffffb831faa0
[ 40.675849] RBP: 0000000000000000 R08: ffffa0752c8b9088 R09: ffffa0752c8b9208
[ 40.683816] R10: 0000000000000006 R11: 0000000000000000 R12: ffffa0752d734000
[ 40.691783] R13: 0000000000000008 R14: 0000000000000000 R15: ffffa07113c18000
[ 40.699750] FS: 00007f94548e5880(0000) GS:ffffa0752e980000(0000) knlGS:0000000000000000
[ 40.708782] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 40.715189] CR2: 0000000000000400 CR3: 000000082b6ae006 CR4: 00000000001606e0
[ 40.723156] Call Trace:
[ 40.725888] dev_qdisc_set_real_num_tx_queues+0x61/0x90
[ 40.731725] netif_set_real_num_tx_queues+0x94/0x1d0
[ 40.737286] __igb_open+0x19a/0x5d0 [igb]
[ 40.741767] __dev_open+0xbb/0x150
[ 40.745567] __dev_change_flags+0x157/0x1a0
[ 40.750240] dev_change_flags+0x23/0x60
[...]
Fixes: 4cda75275f9f ("net: sched: make newly activated qdiscs visible")
Reported-by: Michal Kubecek <mkubecek@suse.cz>
CC: Michal Kubecek <mkubecek@suse.cz>
CC: Eric Dumazet <edumazet@google.com>
CC: Jamal Hadi Salim <jhs@mojatatu.com>
CC: Cong Wang <xiyou.wangcong@gmail.com>
CC: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In their .attach callback, mq[prio] only add the qdiscs of the currently
active TX queues to the device's qdisc hash list.
If a user later increases the number of active TX queues, their qdiscs
are not visible via eg. 'tc qdisc show'.
Add a hook to netif_set_real_num_tx_queues() that walks all active
TX queues and adds those which are missing to the hash list.
CC: Eric Dumazet <edumazet@google.com>
CC: Jamal Hadi Salim <jhs@mojatatu.com>
CC: Cong Wang <xiyou.wangcong@gmail.com>
CC: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The bucket->lock is not needed in the sock_hash_free and sock_map_free
calls, in fact it is causing a splat due to being inside rcu block.
| BUG: sleeping function called from invalid context at net/core/sock.c:2935
| in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 62, name: kworker/0:1
| 3 locks held by kworker/0:1/62:
| #0: ffff88813b019748 ((wq_completion)events){+.+.}, at: process_one_work+0x1d7/0x5e0
| #1: ffffc900000abe50 ((work_completion)(&map->work)){+.+.}, at: process_one_work+0x1d7/0x5e0
| #2: ffff8881381f6df8 (&stab->lock){+...}, at: sock_map_free+0x26/0x180
| CPU: 0 PID: 62 Comm: kworker/0:1 Not tainted 5.5.0-04008-g7b083332376e #454
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
| Workqueue: events bpf_map_free_deferred
| Call Trace:
| dump_stack+0x71/0xa0
| ___might_sleep.cold+0xa6/0xb6
| lock_sock_nested+0x28/0x90
| sock_map_free+0x5f/0x180
| bpf_map_free_deferred+0x58/0x80
| process_one_work+0x260/0x5e0
| worker_thread+0x4d/0x3e0
| kthread+0x108/0x140
| ? process_one_work+0x5e0/0x5e0
| ? kthread_park+0x90/0x90
| ret_from_fork+0x3a/0x50
The reason we have stab->lock and bucket->locks in sockmap code is to
handle checking EEXIST in update/delete cases. We need to be careful during
an update operation that we check for EEXIST and we need to ensure that the
psock object is not in some partial state of removal/insertion while we do
this. So both map_update_common and sock_map_delete need to guard from being
run together potentially deleting an entry we are checking, etc. But by the
time we get to the tear-down code in sock_{ma[|hash}_free we have already
disconnected the map and we just did synchronize_rcu() in the line above so
no updates/deletes should be in flight. Because of this we can drop the
bucket locks from the map free'ing code, noting no update/deletes can be
in-flight.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Reported-by: Jakub Sitnicki <jakub@cloudflare.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/158385850787.30597.8346421465837046618.stgit@john-Precision-5820-Tower
|
|
When pktgen is used to measure the performance of dev_queue_xmit()
packet handling in the core, it is preferable to not hand down
packets to a low-level Ethernet driver as it would distort the
measurements.
Allow using pktgen on the loopback device, thus constraining
measurements to core code.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
