summaryrefslogtreecommitdiff
path: root/net/can
AgeCommit message (Collapse)AuthorFilesLines
2024-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+4
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/phy/phy_device.c 2560db6ede1a ("net: phy: Fix missing of_node_put() for leds") 1dce520abd46 ("net: phy: Use for_each_available_child_of_node_scoped()") https://lore.kernel.org/20240904115823.74333648@canb.auug.org.au Adjacent changes: drivers/net/ethernet/xilinx/xilinx_axienet.h drivers/net/ethernet/xilinx/xilinx_axienet_main.c 858430db28a5 ("net: xilinx: axienet: Fix race in axienet_stop") 76abb5d675c4 ("net: xilinx: axienet: Add statistics support") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-30can: j1939: use correct function name in commentZhang Changzhong1-4/+4
The function j1939_cancel_all_active_sessions() was renamed to j1939_cancel_active_session() but name in comment wasn't updated. Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://patch.msgid.link/1724935703-44621-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-08-06can: bcm: Remove proc entry when dev is unregistered.Kuniyuki Iwashima1-0/+4
syzkaller reported a warning in bcm_connect() below. [0] The repro calls connect() to vxcan1, removes vxcan1, and calls connect() with ifindex == 0. Calling connect() for a BCM socket allocates a proc entry. Then, bcm_sk(sk)->bound is set to 1 to prevent further connect(). However, removing the bound device resets bcm_sk(sk)->bound to 0 in bcm_notify(). The 2nd connect() tries to allocate a proc entry with the same name and sets NULL to bcm_sk(sk)->bcm_proc_read, leaking the original proc entry. Since the proc entry is available only for connect()ed sockets, let's clean up the entry when the bound netdev is unregistered. [0]: proc_dir_entry 'can-bcm/2456' already registered WARNING: CPU: 1 PID: 394 at fs/proc/generic.c:376 proc_register+0x645/0x8f0 fs/proc/generic.c:375 Modules linked in: CPU: 1 PID: 394 Comm: syz-executor403 Not tainted 6.10.0-rc7-g852e42cc2dd4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:proc_register+0x645/0x8f0 fs/proc/generic.c:375 Code: 00 00 00 00 00 48 85 ed 0f 85 97 02 00 00 4d 85 f6 0f 85 9f 02 00 00 48 c7 c7 9b cb cf 87 48 89 de 4c 89 fa e8 1c 6f eb fe 90 <0f> 0b 90 90 48 c7 c7 98 37 99 89 e8 cb 7e 22 05 bb 00 00 00 10 48 RSP: 0018:ffa0000000cd7c30 EFLAGS: 00010246 RAX: 9e129be1950f0200 RBX: ff1100011b51582c RCX: ff1100011857cd80 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000002 RBP: 0000000000000000 R08: ffd400000000000f R09: ff1100013e78cac0 R10: ffac800000cd7980 R11: ff1100013e12b1f0 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ff1100011a99a2ec FS: 00007fbd7086f740(0000) GS:ff1100013fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200071c0 CR3: 0000000118556004 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> proc_create_net_single+0x144/0x210 fs/proc/proc_net.c:220 bcm_connect+0x472/0x840 net/can/bcm.c:1673 __sys_connect_file net/socket.c:2049 [inline] __sys_connect+0x5d2/0x690 net/socket.c:2066 __do_sys_connect net/socket.c:2076 [inline] __se_sys_connect net/socket.c:2073 [inline] __x64_sys_connect+0x8f/0x100 net/socket.c:2073 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1c0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fbd708b0e5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007fff8cd33f08 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fbd708b0e5d RDX: 0000000000000010 RSI: 0000000020000040 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000040 R09: 0000000000000040 R10: 0000000000000040 R11: 0000000000000246 R12: 00007fff8cd34098 R13: 0000000000401280 R14: 0000000000406de8 R15: 00007fbd70ab9000 </TASK> remove_proc_entry: removing non-empty directory 'net/can-bcm', leaking at least '2456' Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/all/20240722192842.37421-1-kuniyu@amazon.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-7/+20
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: e3f02f32a050 ("ionic: fix kernel panic due to multi-buffer handling") d9c04209990b ("ionic: Mark error paths in the data path as unlikely") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-21net: can: j1939: recover socket queue on CAN bus error during BAM transmissionOleksij Rempel1-0/+2
Addresses an issue where a CAN bus error during a BAM transmission could stall the socket queue, preventing further transmissions even after the bus error is resolved. The fix activates the next queued session after the error recovery, allowing communication to continue. Fixes: 9d71dd0c70099 ("can: add support of SAE J1939 protocol") Cc: stable@vger.kernel.org Reported-by: Alexander Hölzl <alexander.hoelzl@gmx.net> Tested-by: Alexander Hölzl <alexander.hoelzl@gmx.net> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20240528070648.1947203-1-o.rempel@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21net: can: j1939: Initialize unused data in j1939_send_one()Shigeru Yoshida1-5/+1
syzbot reported kernel-infoleak in raw_recvmsg() [1]. j1939_send_one() creates full frame including unused data, but it doesn't initialize it. This causes the kernel-infoleak issue. Fix this by initializing unused data. [1] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline] BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copy_to_user_iter lib/iov_iter.c:24 [inline] iterate_ubuf include/linux/iov_iter.h:29 [inline] iterate_and_advance2 include/linux/iov_iter.h:245 [inline] iterate_and_advance include/linux/iov_iter.h:271 [inline] _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 copy_to_iter include/linux/uio.h:196 [inline] memcpy_to_msg include/linux/skbuff.h:4113 [inline] raw_recvmsg+0x2b8/0x9e0 net/can/raw.c:1008 sock_recvmsg_nosec net/socket.c:1046 [inline] sock_recvmsg+0x2c4/0x340 net/socket.c:1068 ____sys_recvmsg+0x18a/0x620 net/socket.c:2803 ___sys_recvmsg+0x223/0x840 net/socket.c:2845 do_recvmmsg+0x4fc/0xfd0 net/socket.c:2939 __sys_recvmmsg net/socket.c:3018 [inline] __do_sys_recvmmsg net/socket.c:3041 [inline] __se_sys_recvmmsg net/socket.c:3034 [inline] __x64_sys_recvmmsg+0x397/0x490 net/socket.c:3034 x64_sys_call+0xf6c/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:300 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1313 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795 sock_alloc_send_skb include/net/sock.h:1842 [inline] j1939_sk_alloc_skb net/can/j1939/socket.c:878 [inline] j1939_sk_send_loop net/can/j1939/socket.c:1142 [inline] j1939_sk_sendmsg+0xc0a/0x2730 net/can/j1939/socket.c:1277 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 ____sys_sendmsg+0x877/0xb60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674 x64_sys_call+0xc4b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Bytes 12-15 of 16 are uninitialized Memory access of size 16 starts at ffff888120969690 Data copied to user address 00000000200017c0 CPU: 1 PID: 5050 Comm: syz-executor198 Not tainted 6.9.0-rc5-syzkaller-00031-g71b1543c83d6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Reported-and-tested-by: syzbot+5681e40d297b30f5b513@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=5681e40d297b30f5b513 Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Link: https://lore.kernel.org/all/20240517035953.2617090-1-syoshida@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21net: can: j1939: enhanced error handling for tightly received RTS messages ↵Oleksij Rempel1-2/+17
in xtp_rx_rts_session_new This patch enhances error handling in scenarios with RTS (Request to Send) messages arriving closely. It replaces the less informative WARN_ON_ONCE backtraces with a new error handling method. This provides clearer error messages and allows for the early termination of problematic sessions. Previously, sessions were only released at the end of j1939_xtp_rx_rts(). Potentially this could be reproduced with something like: testj1939 -r vcan0:0x80 & while true; do # send first RTS cansend vcan0 18EC8090#1014000303002301; # send second RTS cansend vcan0 18EC8090#1014000303002301; # send abort cansend vcan0 18EC8090#ff00000000002301; done Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Reported-by: syzbot+daa36413a5cedf799ae4@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20231117124959.961171-1-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-20can: isotp: remove ISO 15675-2 specification version where possibleOliver Hartkopp2-11/+11
With the new ISO 15765-2:2024 release the former documentation and comments have to be reworked. This patch removes the ISO specification version/date where possible. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Acked-by: Francesco Valla <valla.francesco@gmail.com> Link: https://lore.kernel.org/all/20240420194746.4885-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-20Merge tag 'linux-can-next-for-6.9-20240220' of ↵Paolo Abeni1-6/+11
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2024-02-20 this is a pull request of 9 patches for net-next/master. The first patch is by Francesco Dolcini and removes a redundant check for pm_clock_support from the m_can driver. Martin Hundebøll contributes 3 patches to the m_can/tcan4x5x driver to allow resume upon RX of a CAN frame. 3 patches by Srinivas Goud add support for ECC statistics to the xilinx_can driver. The last 2 patches are by Oliver Hartkopp and me, target the CAN RAW protocol and fix an error in the getsockopt() for CAN-XL introduced in the previous pull request to net-next (linux-can-next-for-6.9-20240213). linux-can-next-for-6.9-20240220 * tag 'linux-can-next-for-6.9-20240220' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: raw: raw_getsockopt(): reduce scope of err can: raw: fix getsockopt() for new CAN_RAW_XL_VCID_OPTS can: xilinx_can: Add ethtool stats interface for ECC errors can: xilinx_can: Add ECC support dt-bindings: can: xilinx_can: Add 'xlnx,has-ecc' optional property can: tcan4x5x: support resuming from rx interrupt signal can: m_can: allow keeping the transceiver running in suspend dt-bindings: can: tcan4x5x: Document the wakeup-source flag can: m_can: remove redundant check for pm_clock_support ==================== Link: https://lore.kernel.org/r/20240220085130.2936533-1-mkl@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-20can: raw: raw_getsockopt(): reduce scope of errMarc Kleine-Budde1-5/+8
Reduce the scope of the variable "err" to the individual cases. This is to avoid the mistake of setting "err" in the mistaken belief that it will be evaluated later. Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20240220-raw-setsockopt-v1-1-7d34cb1377fc@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-20can: raw: fix getsockopt() for new CAN_RAW_XL_VCID_OPTSOliver Hartkopp1-1/+3
The code for the CAN_RAW_XL_VCID_OPTS getsockopt() was incompletely adopted from the CAN_RAW_FILTER getsockopt(). Add the missing put_user() and return statements. Flagged by Smatch. Fixes: c83c22ec1493 ("can: canxl: add virtual CAN network identifier support") Reported-by: Simon Horman <horms@kernel.org> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20240219200021.12113-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-18/+33
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: net/core/dev.c 9f30831390ed ("net: add rcu safety to rtnl_prop_list_size()") 723de3ebef03 ("net: free altname using an RCU callback") net/unix/garbage.c 11498715f266 ("af_unix: Remove io_uring code for GC.") 25236c91b5ab ("af_unix: Fix task hung while purging oob_skb in GC.") drivers/net/ethernet/renesas/ravb_main.c ed4adc07207d ("net: ravb: Count packets instead of descriptors in GbEth RX path" ) c2da9408579d ("ravb: Add Rx checksum offload support for GbEth") net/mptcp/protocol.c bdd70eb68913 ("mptcp: drop the push_pending field") 28e5c1380506 ("mptcp: annotate lockless accesses around read-mostly fields") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-14can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)Oleksij Rempel2-4/+19
Lock jsk->sk to prevent UAF when setsockopt(..., SO_J1939_FILTER, ...) modifies jsk->filters while receiving packets. Following trace was seen on affected system: ================================================================== BUG: KASAN: slab-use-after-free in j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] Read of size 4 at addr ffff888012144014 by task j1939/350 CPU: 0 PID: 350 Comm: j1939 Tainted: G W OE 6.5.0-rc5 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: print_report+0xd3/0x620 ? kasan_complete_mode_report_info+0x7d/0x200 ? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] kasan_report+0xc2/0x100 ? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] __asan_load4+0x84/0xb0 j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] j1939_sk_recv+0x20b/0x320 [can_j1939] ? __kasan_check_write+0x18/0x20 ? __pfx_j1939_sk_recv+0x10/0x10 [can_j1939] ? j1939_simple_recv+0x69/0x280 [can_j1939] ? j1939_ac_recv+0x5e/0x310 [can_j1939] j1939_can_recv+0x43f/0x580 [can_j1939] ? __pfx_j1939_can_recv+0x10/0x10 [can_j1939] ? raw_rcv+0x42/0x3c0 [can_raw] ? __pfx_j1939_can_recv+0x10/0x10 [can_j1939] can_rcv_filter+0x11f/0x350 [can] can_receive+0x12f/0x190 [can] ? __pfx_can_rcv+0x10/0x10 [can] can_rcv+0xdd/0x130 [can] ? __pfx_can_rcv+0x10/0x10 [can] __netif_receive_skb_one_core+0x13d/0x150 ? __pfx___netif_receive_skb_one_core+0x10/0x10 ? __kasan_check_write+0x18/0x20 ? _raw_spin_lock_irq+0x8c/0xe0 __netif_receive_skb+0x23/0xb0 process_backlog+0x107/0x260 __napi_poll+0x69/0x310 net_rx_action+0x2a1/0x580 ? __pfx_net_rx_action+0x10/0x10 ? __pfx__raw_spin_lock+0x10/0x10 ? handle_irq_event+0x7d/0xa0 __do_softirq+0xf3/0x3f8 do_softirq+0x53/0x80 </IRQ> <TASK> __local_bh_enable_ip+0x6e/0x70 netif_rx+0x16b/0x180 can_send+0x32b/0x520 [can] ? __pfx_can_send+0x10/0x10 [can] ? __check_object_size+0x299/0x410 raw_sendmsg+0x572/0x6d0 [can_raw] ? __pfx_raw_sendmsg+0x10/0x10 [can_raw] ? apparmor_socket_sendmsg+0x2f/0x40 ? __pfx_raw_sendmsg+0x10/0x10 [can_raw] sock_sendmsg+0xef/0x100 sock_write_iter+0x162/0x220 ? __pfx_sock_write_iter+0x10/0x10 ? __rtnl_unlock+0x47/0x80 ? security_file_permission+0x54/0x320 vfs_write+0x6ba/0x750 ? __pfx_vfs_write+0x10/0x10 ? __fget_light+0x1ca/0x1f0 ? __rcu_read_unlock+0x5b/0x280 ksys_write+0x143/0x170 ? __pfx_ksys_write+0x10/0x10 ? __kasan_check_read+0x15/0x20 ? fpregs_assert_state_consistent+0x62/0x70 __x64_sys_write+0x47/0x60 do_syscall_64+0x60/0x90 ? do_syscall_64+0x6d/0x90 ? irqentry_exit+0x3f/0x50 ? exc_page_fault+0x79/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Allocated by task 348: kasan_save_stack+0x2a/0x50 kasan_set_track+0x29/0x40 kasan_save_alloc_info+0x1f/0x30 __kasan_kmalloc+0xb5/0xc0 __kmalloc_node_track_caller+0x67/0x160 j1939_sk_setsockopt+0x284/0x450 [can_j1939] __sys_setsockopt+0x15c/0x2f0 __x64_sys_setsockopt+0x6b/0x80 do_syscall_64+0x60/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Freed by task 349: kasan_save_stack+0x2a/0x50 kasan_set_track+0x29/0x40 kasan_save_free_info+0x2f/0x50 __kasan_slab_free+0x12e/0x1c0 __kmem_cache_free+0x1b9/0x380 kfree+0x7a/0x120 j1939_sk_setsockopt+0x3b2/0x450 [can_j1939] __sys_setsockopt+0x15c/0x2f0 __x64_sys_setsockopt+0x6b/0x80 do_syscall_64+0x60/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Fixes: 9d71dd0c70099 ("can: add support of SAE J1939 protocol") Reported-by: Sili Luo <rootlab@huawei.com> Suggested-by: Sili Luo <rootlab@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20231020133814.383996-1-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-14can: j1939: prevent deadlock by changing j1939_socks_lock to rwlockZiqi Zhao3-14/+14
The following 3 locks would race against each other, causing the deadlock situation in the Syzbot bug report: - j1939_socks_lock - active_session_list_lock - sk_session_queue_lock A reasonable fix is to change j1939_socks_lock to an rwlock, since in the rare situations where a write lock is required for the linked list that j1939_socks_lock is protecting, the code does not attempt to acquire any more locks. This would break the circular lock dependency, where, for example, the current thread already locks j1939_socks_lock and attempts to acquire sk_session_queue_lock, and at the same time, another thread attempts to acquire j1939_socks_lock while holding sk_session_queue_lock. NOTE: This patch along does not fix the unregister_netdevice bug reported by Syzbot; instead, it solves a deadlock situation to prepare for one or more further patches to actually fix the Syzbot bug, which appears to be a reference counting problem within the j1939 codebase. Reported-by: <syzbot+1591462f226d9cbf0564@syzkaller.appspotmail.com> Signed-off-by: Ziqi Zhao <astrajoan@yahoo.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20230721162226.8639-1-astrajoan@yahoo.com [mkl: remove unrelated newline change] Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-13can: canxl: add virtual CAN network identifier supportOliver Hartkopp2-8/+87
CAN XL data frames contain an 8-bit virtual CAN network identifier (VCID). A VCID value of zero represents an 'untagged' CAN XL frame. To receive and send these optional VCIDs via CAN_RAW sockets a new socket option CAN_RAW_XL_VCID_OPTS is introduced to define/access VCID content: - tx: set the outgoing VCID value by the kernel (one fixed 8-bit value) - tx: pass through VCID values from the user space (e.g. for traffic replay) - rx: apply VCID receive filter (value/mask) to be passed to the user space With the 'tx pass through' option CAN_RAW_XL_VCID_TX_PASS all valid VCID values can be sent, e.g. to replay full qualified CAN XL traffic. The VCID value provided for the CAN_RAW_XL_VCID_TX_SET option will override the VCID value in the struct canxl_frame.prio defined for CAN_RAW_XL_VCID_TX_PASS when both flags are set. With a rx_vcid_mask of zero all possible VCID values (0x00 - 0xFF) are passed to the user space when the CAN_RAW_XL_VCID_RX_FILTER flag is set. Without this flag only untagged CAN XL frames (VCID = 0x00) are delivered to the user space (default). The 8-bit VCID is stored inside the CAN XL prio element (only in CAN XL frames!) to not interfere with other CAN content or the CAN filters provided by the CAN_RAW sockets and kernel infrastruture. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20240212213550.18516-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12can: isotp: support dynamic flow control parametersOliver Hartkopp1-2/+3
The ISO15765-2 standard supports to take the PDUs communication parameters blocksize (BS) and Separation Time minimum (STmin) either from the first received flow control (FC) "static" or from every received FC "dynamic". Add a new CAN_ISOTP_DYN_FC_PARMS flag to support dynamic FC parameters. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20231208165729.3011-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12can: bcm: add recvmsg flags for own, local and remote trafficNicolas Maier1-12/+57
CAN RAW sockets allow userspace to tell if a received CAN frame comes from the same socket, another socket on the same host, or another host. See commit 1e55659ce6dd ("can-raw: add msg_flags to distinguish local traffic"). However, this feature is missing in CAN BCM sockets. Add the same feature to CAN BCM sockets. When reading a received frame (opcode RX_CHANGED) using recvmsg, two flags in msg->msg_flags may be set following the previous convention (from CAN RAW), to distinguish between 'own', 'local' and 'remote' CAN traffic. Update the documentation to reflect this change. Signed-off-by: Nicolas Maier <nicolas.maier.dev@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20240120081018.2319-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-10-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-11/+8
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: kernel/bpf/verifier.c 829955981c55 ("bpf: Fix verifier log for async callback return values") a923819fb2c5 ("bpf: Treat first argument as return value for bpf_throw") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-06can: isotp: isotp_sendmsg(): fix TX state detection and wait behaviorLukas Magel1-11/+8
With patch [1], isotp_poll was updated to also queue the poller in the so->wait queue, which is used for send state changes. Since the queue now also contains polling tasks that are not interested in sending, the queue fill state can no longer be used as an indication of send readiness. As a consequence, nonblocking writes can lead to a race and lock-up of the socket if there is a second task polling the socket in parallel. With this patch, isotp_sendmsg does not consult wq_has_sleepers but instead tries to atomically set so->tx.state and waits on so->wait if it is unable to do so. This behavior is in alignment with isotp_poll, which also checks so->tx.state to determine send readiness. V2: - Revert direct exit to goto err_event_drop [1] https://lore.kernel.org/all/20230331125511.372783-1-michal.sojka@cvut.cz Reported-by: Maxime Jayat <maxime.jayat@mobile-devices.fr> Closes: https://lore.kernel.org/linux-can/11328958-453f-447f-9af8-3b5824dfb041@munic.io/ Signed-off-by: Lukas Magel <lukas.magel@posteo.net> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Fixes: 79e19fa79cb5 ("can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT events") Link: https://github.com/pylessard/python-udsoncan/issues/178#issuecomment-1743786590 Link: https://lore.kernel.org/all/20230827092205.7908-1-lukas.magel@posteo.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-10-04can: raw: Remove NULL check before dev_{put, hold}Jiapeng Chong1-2/+1
The call netdev_{put, hold} of dev_{put, hold} will check NULL, so there is no need to check before using dev_{put, hold}, remove it to silence the warning: ./net/can/raw.c:497:2-9: WARNING: NULL check before dev_{put, hold} functions is not needed. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6231 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reported-by: Simon Horman <horms@kernel.org> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230825064656.87751-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-10-01net: implement lockless SO_PRIORITYEric Dumazet2-2/+2
This is a followup of 8bf43be799d4 ("net: annotate data-races around sk->sk_priority"). sk->sk_priority can be read and written without holding the socket lock. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-01net: annotate data-races around sk->sk_tsflagsEric Dumazet1-4/+6
sk->sk_tsflags can be read locklessly, add corresponding annotations. Fixes: b9f40e21ef42 ("net-timestamp: move timestamp flags out of sk_flags") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-23can: raw: add missing refcount for memory leak fixOliver Hartkopp1-9/+26
Commit ee8b94c8510c ("can: raw: fix receiver memory leak") introduced a new reference to the CAN netdevice that has assigned CAN filters. But this new ro->dev reference did not maintain its own refcount which lead to another KASAN use-after-free splat found by Eric Dumazet. This patch ensures a proper refcount for the CAN nedevice. Fixes: ee8b94c8510c ("can: raw: fix receiver memory leak") Reported-by: Eric Dumazet <edumazet@google.com> Cc: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20230821144547.6658-3-socketcan@hartkopp.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-23can: isotp: fix support for transmission of SF without flow controlOliver Hartkopp1-15/+7
The original implementation had a very simple handling for single frame transmissions as it just sent the single frame without a timeout handling. With the new echo frame handling the echo frame was also introduced for single frames but the former exception ('simple without timers') has been maintained by accident. This leads to a 1 second timeout when closing the socket and to an -ECOMM error when CAN_ISOTP_WAIT_TX_DONE is selected. As the echo handling is always active (also for single frames) remove the wrong extra condition for single frames. Fixes: 9f39d36530e5 ("can: isotp: add support for transmission without flow control") Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20230821144547.6658-2-socketcan@hartkopp.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-29net: annotate data-races around sk->sk_markEric Dumazet1-1/+1
sk->sk_mark is often read while another thread could change the value. Fixes: 4a19ec5800fc ("[NET]: Introducing socket mark socket option.") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-20can: raw: fix lockdep issue in raw_release()Eric Dumazet1-2/+3
syzbot complained about a lockdep issue [1] Since raw_bind() and raw_setsockopt() first get RTNL before locking the socket, we must adopt the same order in raw_release() [1] WARNING: possible circular locking dependency detected 6.5.0-rc1-syzkaller-00192-g78adb4bcf99e #0 Not tainted ------------------------------------------------------ syz-executor.0/14110 is trying to acquire lock: ffff88804e4b6130 (sk_lock-AF_CAN){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1708 [inline] ffff88804e4b6130 (sk_lock-AF_CAN){+.+.}-{0:0}, at: raw_bind+0xb1/0xab0 net/can/raw.c:435 but task is already holding lock: ffffffff8e3df368 (rtnl_mutex){+.+.}-{3:3}, at: raw_bind+0xa7/0xab0 net/can/raw.c:434 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (rtnl_mutex){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:603 [inline] __mutex_lock+0x181/0x1340 kernel/locking/mutex.c:747 raw_release+0x1c6/0x9b0 net/can/raw.c:391 __sock_release+0xcd/0x290 net/socket.c:654 sock_close+0x1c/0x20 net/socket.c:1386 __fput+0x3fd/0xac0 fs/file_table.c:384 task_work_run+0x14d/0x240 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x210/0x240 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline] syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:297 do_syscall_64+0x44/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd -> #0 (sk_lock-AF_CAN){+.+.}-{0:0}: check_prev_add kernel/locking/lockdep.c:3142 [inline] check_prevs_add kernel/locking/lockdep.c:3261 [inline] validate_chain kernel/locking/lockdep.c:3876 [inline] __lock_acquire+0x2e3d/0x5de0 kernel/locking/lockdep.c:5144 lock_acquire kernel/locking/lockdep.c:5761 [inline] lock_acquire+0x1ae/0x510 kernel/locking/lockdep.c:5726 lock_sock_nested+0x3a/0xf0 net/core/sock.c:3492 lock_sock include/net/sock.h:1708 [inline] raw_bind+0xb1/0xab0 net/can/raw.c:435 __sys_bind+0x1ec/0x220 net/socket.c:1792 __do_sys_bind net/socket.c:1803 [inline] __se_sys_bind net/socket.c:1801 [inline] __x64_sys_bind+0x72/0xb0 net/socket.c:1801 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(sk_lock-AF_CAN); lock(rtnl_mutex); lock(sk_lock-AF_CAN); *** DEADLOCK *** 1 lock held by syz-executor.0/14110: stack backtrace: CPU: 0 PID: 14110 Comm: syz-executor.0 Not tainted 6.5.0-rc1-syzkaller-00192-g78adb4bcf99e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106 check_noncircular+0x311/0x3f0 kernel/locking/lockdep.c:2195 check_prev_add kernel/locking/lockdep.c:3142 [inline] check_prevs_add kernel/locking/lockdep.c:3261 [inline] validate_chain kernel/locking/lockdep.c:3876 [inline] __lock_acquire+0x2e3d/0x5de0 kernel/locking/lockdep.c:5144 lock_acquire kernel/locking/lockdep.c:5761 [inline] lock_acquire+0x1ae/0x510 kernel/locking/lockdep.c:5726 lock_sock_nested+0x3a/0xf0 net/core/sock.c:3492 lock_sock include/net/sock.h:1708 [inline] raw_bind+0xb1/0xab0 net/can/raw.c:435 __sys_bind+0x1ec/0x220 net/socket.c:1792 __do_sys_bind net/socket.c:1803 [inline] __se_sys_bind net/socket.c:1801 [inline] __x64_sys_bind+0x72/0xb0 net/socket.c:1801 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fd89007cb29 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fd890d2a0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000031 RAX: ffffffffffffffda RBX: 00007fd89019bf80 RCX: 00007fd89007cb29 RDX: 0000000000000010 RSI: 0000000020000040 RDI: 0000000000000003 RBP: 00007fd8900c847a R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007fd89019bf80 R15: 00007ffebf8124f8 </TASK> Fixes: ee8b94c8510c ("can: raw: fix receiver memory leak") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ziyang Xuan <william.xuanziyang@huawei.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: stable@vger.kernel.org Cc: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/all/20230720114438.172434-1-edumazet@google.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-07-17can: bcm: Fix UAF in bcm_proc_show()YueHaibing1-6/+6
BUG: KASAN: slab-use-after-free in bcm_proc_show+0x969/0xa80 Read of size 8 at addr ffff888155846230 by task cat/7862 CPU: 1 PID: 7862 Comm: cat Not tainted 6.5.0-rc1-00153-gc8746099c197 #230 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xd5/0x150 print_report+0xc1/0x5e0 kasan_report+0xba/0xf0 bcm_proc_show+0x969/0xa80 seq_read_iter+0x4f6/0x1260 seq_read+0x165/0x210 proc_reg_read+0x227/0x300 vfs_read+0x1d5/0x8d0 ksys_read+0x11e/0x240 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd Allocated by task 7846: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0x9e/0xa0 bcm_sendmsg+0x264b/0x44e0 sock_sendmsg+0xda/0x180 ____sys_sendmsg+0x735/0x920 ___sys_sendmsg+0x11d/0x1b0 __sys_sendmsg+0xfa/0x1d0 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 7846: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x27/0x40 ____kasan_slab_free+0x161/0x1c0 slab_free_freelist_hook+0x119/0x220 __kmem_cache_free+0xb4/0x2e0 rcu_core+0x809/0x1bd0 bcm_op is freed before procfs entry be removed in bcm_release(), this lead to bcm_proc_show() may read the freed bcm_op. Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230715092543.15548-1-yuehaibing@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-07-17can: raw: fix receiver memory leakZiyang Xuan1-33/+24
Got kmemleak errors with the following ltp can_filter testcase: for ((i=1; i<=100; i++)) do ./can_filter & sleep 0.1 done ============================================================== [<00000000db4a4943>] can_rx_register+0x147/0x360 [can] [<00000000a289549d>] raw_setsockopt+0x5ef/0x853 [can_raw] [<000000006d3d9ebd>] __sys_setsockopt+0x173/0x2c0 [<00000000407dbfec>] __x64_sys_setsockopt+0x61/0x70 [<00000000fd468496>] do_syscall_64+0x33/0x40 [<00000000b7e47d51>] entry_SYSCALL_64_after_hwframe+0x61/0xc6 It's a bug in the concurrent scenario of unregister_netdevice_many() and raw_release() as following: cpu0 cpu1 unregister_netdevice_many(can_dev) unlist_netdevice(can_dev) // dev_get_by_index() return NULL after this net_set_todo(can_dev) raw_release(can_socket) dev = dev_get_by_index(, ro->ifindex); // dev == NULL if (dev) { // receivers in dev_rcv_lists not free because dev is NULL raw_disable_allfilters(, dev, ); dev_put(dev); } ... ro->bound = 0; ... call_netdevice_notifiers(NETDEV_UNREGISTER, ) raw_notify(, NETDEV_UNREGISTER, ) if (ro->bound) // invalid because ro->bound has been set 0 raw_disable_allfilters(, dev, ); // receivers in dev_rcv_lists will never be freed Add a net_device pointer member in struct raw_sock to record bound can_dev, and use rtnl_lock to serialize raw_socket members between raw_bind(), raw_release(), raw_setsockopt() and raw_notify(). Use ro->dev to decide whether to free receivers in dev_rcv_lists. Fixes: 8d0caedb7596 ("can: bcm/raw/isotp: use per module netdevice notifier") Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Link: https://lore.kernel.org/all/20230711011737.1969582-1-william.xuanziyang@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+3
Merge in late fixes to prepare for the 6.5 net-next PR. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-25sock: Remove ->sendpage*() in favour of sendmsg(MSG_SPLICE_PAGES)David Howells4-4/+0
Remove ->sendpage() and ->sendpage_locked(). sendmsg() with MSG_SPLICE_PAGES should be used instead. This allows multiple pages and multipage folios to be passed through. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for net/can cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> cc: linux-afs@lists.infradead.org cc: mptcp@lists.linux.dev cc: rds-devel@oss.oracle.com cc: tipc-discussion@lists.sourceforge.net cc: virtualization@lists.linux-foundation.org Link: https://lore.kernel.org/r/20230623225513.2732256-16-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-22can: isotp: isotp_sendmsg(): fix return error fix on TX pathOliver Hartkopp1-2/+3
With commit d674a8f123b4 ("can: isotp: isotp_sendmsg(): fix return error on FC timeout on TX path") the missing correct return value in the case of a protocol error was introduced. But the way the error value has been read and sent to the user space does not follow the common scheme to clear the error after reading which is provided by the sock_error() function. This leads to an error report at the following write() attempt although everything should be working. Fixes: d674a8f123b4 ("can: isotp: isotp_sendmsg(): fix return error on FC timeout on TX path") Reported-by: Carsten Schmidt <carsten.schmidt-achim@t-online.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230607072708.38809-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-05can: j1939: avoid possible use-after-free when j1939_can_rx_register failsFedor Pchelkin1-1/+3
Syzkaller reports the following failure: BUG: KASAN: use-after-free in kref_put include/linux/kref.h:64 [inline] BUG: KASAN: use-after-free in j1939_priv_put+0x25/0xa0 net/can/j1939/main.c:172 Write of size 4 at addr ffff888141c15058 by task swapper/3/0 CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.10.144-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x107/0x167 lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x220 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:562 check_memory_region_inline mm/kasan/generic.c:186 [inline] check_memory_region+0x145/0x190 mm/kasan/generic.c:192 instrument_atomic_read_write include/linux/instrumented.h:101 [inline] atomic_fetch_sub_release include/asm-generic/atomic-instrumented.h:220 [inline] __refcount_sub_and_test include/linux/refcount.h:272 [inline] __refcount_dec_and_test include/linux/refcount.h:315 [inline] refcount_dec_and_test include/linux/refcount.h:333 [inline] kref_put include/linux/kref.h:64 [inline] j1939_priv_put+0x25/0xa0 net/can/j1939/main.c:172 j1939_sk_sock_destruct+0x44/0x90 net/can/j1939/socket.c:374 __sk_destruct+0x4e/0x820 net/core/sock.c:1784 rcu_do_batch kernel/rcu/tree.c:2485 [inline] rcu_core+0xb35/0x1a30 kernel/rcu/tree.c:2726 __do_softirq+0x289/0x9a3 kernel/softirq.c:298 asm_call_irq_on_stack+0x12/0x20 </IRQ> __run_on_irqstack arch/x86/include/asm/irq_stack.h:26 [inline] run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:77 [inline] do_softirq_own_stack+0xaa/0xe0 arch/x86/kernel/irq_64.c:77 invoke_softirq kernel/softirq.c:393 [inline] __irq_exit_rcu kernel/softirq.c:423 [inline] irq_exit_rcu+0x136/0x200 kernel/softirq.c:435 sysvec_apic_timer_interrupt+0x4d/0x100 arch/x86/kernel/apic/apic.c:1095 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:635 Allocated by task 1141: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc.constprop.0+0xc9/0xd0 mm/kasan/common.c:461 kmalloc include/linux/slab.h:552 [inline] kzalloc include/linux/slab.h:664 [inline] j1939_priv_create net/can/j1939/main.c:131 [inline] j1939_netdev_start+0x111/0x860 net/can/j1939/main.c:268 j1939_sk_bind+0x8ea/0xd30 net/can/j1939/socket.c:485 __sys_bind+0x1f2/0x260 net/socket.c:1645 __do_sys_bind net/socket.c:1656 [inline] __se_sys_bind net/socket.c:1654 [inline] __x64_sys_bind+0x6f/0xb0 net/socket.c:1654 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x61/0xc6 Freed by task 1141: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track+0x1c/0x30 mm/kasan/common.c:56 kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0x112/0x170 mm/kasan/common.c:422 slab_free_hook mm/slub.c:1542 [inline] slab_free_freelist_hook+0xad/0x190 mm/slub.c:1576 slab_free mm/slub.c:3149 [inline] kfree+0xd9/0x3b0 mm/slub.c:4125 j1939_netdev_start+0x5ee/0x860 net/can/j1939/main.c:300 j1939_sk_bind+0x8ea/0xd30 net/can/j1939/socket.c:485 __sys_bind+0x1f2/0x260 net/socket.c:1645 __do_sys_bind net/socket.c:1656 [inline] __se_sys_bind net/socket.c:1654 [inline] __x64_sys_bind+0x6f/0xb0 net/socket.c:1654 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x61/0xc6 It can be caused by this scenario: CPU0 CPU1 j1939_sk_bind(socket0, ndev0, ...) j1939_netdev_start() j1939_sk_bind(socket1, ndev0, ...) j1939_netdev_start() mutex_lock(&j1939_netdev_lock) j1939_priv_set(ndev0, priv) mutex_unlock(&j1939_netdev_lock) if (priv_new) kref_get(&priv_new->rx_kref) return priv_new; /* inside j1939_sk_bind() */ jsk->priv = priv j1939_can_rx_register(priv) // fails j1939_priv_set(ndev, NULL) kfree(priv) j1939_sk_sock_destruct() j1939_priv_put() // <- uaf To avoid this, call j1939_can_rx_register() under j1939_netdev_lock so that a concurrent thread cannot process j1939_priv before j1939_can_rx_register() returns. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20230526171910.227615-3-pchelkin@ispras.ru Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-05can: j1939: change j1939_netdev_lock type to mutexFedor Pchelkin1-11/+11
It turns out access to j1939_can_rx_register() needs to be serialized, otherwise j1939_priv can be corrupted when parallel threads call j1939_netdev_start() and j1939_can_rx_register() fails. This issue is thoroughly covered in other commit which serializes access to j1939_can_rx_register(). Change j1939_netdev_lock type to mutex so that we do not need to remove GFP_KERNEL from can_rx_register(). j1939_netdev_lock seems to be used in normal contexts where mutex usage is not prohibited. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Suggested-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20230526171910.227615-2-pchelkin@ispras.ru Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-05can: j1939: j1939_sk_send_loop_abort(): improved error queue handling in ↵Oleksij Rempel1-0/+5
J1939 Socket This patch addresses an issue within the j1939_sk_send_loop_abort() function in the j1939/socket.c file, specifically in the context of Transport Protocol (TP) sessions. Without this patch, when a TP session is initiated and a Clear To Send (CTS) frame is received from the remote side requesting one data packet, the kernel dispatches the first Data Transport (DT) frame and then waits for the next CTS. If the remote side doesn't respond with another CTS, the kernel aborts due to a timeout. This leads to the user-space receiving an EPOLLERR on the socket, and the socket becomes active. However, when trying to read the error queue from the socket with sock.recvmsg(, , socket.MSG_ERRQUEUE), it returns -EAGAIN, given that the socket is non-blocking. This situation results in an infinite loop: the user-space repeatedly calls epoll(), epoll() returns the socket file descriptor with EPOLLERR, but the socket then blocks on the recv() of ERRQUEUE. This patch introduces an additional check for the J1939_SOCK_ERRQUEUE flag within the j1939_sk_send_loop_abort() function. If the flag is set, it indicates that the application has subscribed to receive error queue messages. In such cases, the kernel can communicate the current transfer state via the error queue. This allows for the function to return early, preventing the unnecessary setting of the socket into an error state, and breaking the infinite loop. It is crucial to note that a socket error is only needed if the application isn't using the error queue, as, without it, the application wouldn't be aware of transfer issues. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Reported-by: David Jander <david@protonic.nl> Tested-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20230526081946.715190-1-o.rempel@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-15can: j1939: recvmsg(): allow MSG_CMSG_COMPAT flagOliver Hartkopp1-1/+1
The control message provided by J1939 support MSG_CMSG_COMPAT but blocked recvmsg() syscalls that have set this flag, i.e. on 32bit user space on 64 bit kernels. Link: https://github.com/hartkopp/can-isotp/issues/59 Cc: Oleksij Rempel <o.rempel@pengutronix.de> Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/20230505110308.81087-3-mkl@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-15can: isotp: recvmsg(): allow MSG_CMSG_COMPAT flagOliver Hartkopp1-1/+1
The control message provided by isotp support MSG_CMSG_COMPAT but blocked recvmsg() syscalls that have set this flag, i.e. on 32bit user space on 64 bit kernels. Link: https://github.com/hartkopp/can-isotp/issues/59 Cc: Oleksij Rempel <o.rempel@pengutronix.de> Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Fixes: 42bf50a1795a ("can: isotp: support MSG_TRUNC flag when reading from socket") Link: https://lore.kernel.org/20230505110308.81087-2-mkl@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-04-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-27/+52
Conflicts: drivers/net/ethernet/google/gve/gve.h 3ce934558097 ("gve: Secure enough bytes in the first TX desc for all TCP pkts") 75eaae158b1b ("gve: Add XDP DROP and TX support for GQI-QPL format") https://lore.kernel.org/all/20230406104927.45d176f5@canb.auug.org.au/ https://lore.kernel.org/all/c5872985-1a95-0bc8-9dcc-b6f23b439e9d@tessares.net/ Adjacent changes: net/can/isotp.c 051737439eae ("can: isotp: fix race between isotp_sendsmg() and isotp_release()") 96d1c81e6a04 ("can: isotp: add module parameter for maximum pdu size") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-06Merge tag 'linux-can-next-for-6.4-20230404-2' of ↵Jakub Kicinski1-9/+56
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2023-04-04-2 The first patch is by Oliver Hartkopp and makes the maximum pdu size of the CAN ISOTP protocol configurable. The following 5 patches are by Dario Binacchi and add support for the bxCAN controller by ST. Geert Uytterhoeven's patch for the rcar_canfd driver fixes a sparse warning. Peng Fan's patch adds an optional power-domains property to the flexcan device tree binding. Frank Jungclaus adds support for CAN_CTRLMODE_BERR_REPORTING to the esd_usb driver. The last patch is by Oliver Hartkopp and converts the USB IDs of the kvaser_usb driver to hexadecimal values. * tag 'linux-can-next-for-6.4-20230404-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: kvaser_usb: convert USB IDs to hexadecimal values can: esd_usb: Add support for CAN_CTRLMODE_BERR_REPORTING dt-bindings: can: fsl,flexcan: add optional power-domains property can: rcar_canfd: rcar_canfd_probe(): fix plain integer in transceivers[] init can: bxcan: add support for ST bxCAN controller ARM: dts: stm32: add pin map for CAN controller on stm32f4 ARM: dts: stm32: add CAN support on stm32f429 dt-bindings: net: can: add STM32 bxcan DT bindings dt-bindings: arm: stm32: add compatible for syscon gcan node can: isotp: add module parameter for maximum pdu size ==================== Link: https://lore.kernel.org/r/20230404145908.1714400-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-05can: isotp: fix race between isotp_sendsmg() and isotp_release()Oliver Hartkopp1-24/+31
As discussed with Dae R. Jeong and Hillf Danton here [1] the sendmsg() function in isotp.c might get into a race condition when restoring the former tx.state from the old_state. Remove the old_state concept and implement proper locking for the ISOTP_IDLE transitions in isotp_sendmsg(), inspired by a simplification idea from Hillf Danton. Introduce a new tx.state ISOTP_SHUTDOWN and use the same locking mechanism from isotp_release() which resolves a potential race between isotp_sendsmg() and isotp_release(). [1] https://lore.kernel.org/linux-can/ZB%2F93xJxq%2FBUqAgG@dragonet v1: https://lore.kernel.org/all/20230331102114.15164-1-socketcan@hartkopp.net v2: https://lore.kernel.org/all/20230331123600.3550-1-socketcan@hartkopp.net take care of signal interrupts for wait_event_interruptible() in isotp_release() v3: https://lore.kernel.org/all/20230331130654.9886-1-socketcan@hartkopp.net take care of signal interrupts for wait_event_interruptible() in isotp_sendmsg() in the wait_tx_done case v4: https://lore.kernel.org/all/20230331131935.21465-1-socketcan@hartkopp.net take care of signal interrupts for wait_event_interruptible() in isotp_sendmsg() in ALL cases Cc: Dae R. Jeong <threeearcat@gmail.com> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Fixes: 4f027cba8216 ("can: isotp: split tx timer into transmission and timeout") Link: https://lore.kernel.org/all/20230331131935.21465-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org [mkl: rephrase commit message] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-04-05can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT eventsMichal Sojka1-1/+16
When using select()/poll()/epoll() with a non-blocking ISOTP socket to wait for when non-blocking write is possible, a false EPOLLOUT event is sometimes returned. This can happen at least after sending a message which must be split to multiple CAN frames. The reason is that isotp_sendmsg() returns -EAGAIN when tx.state is not equal to ISOTP_IDLE and this behavior is not reflected in datagram_poll(), which is used in isotp_ops. This is fixed by introducing ISOTP-specific poll function, which suppresses the EPOLLOUT events in that case. v2: https://lore.kernel.org/all/20230302092812.320643-1-michal.sojka@cvut.cz v1: https://lore.kernel.org/all/20230224010659.48420-1-michal.sojka@cvut.cz https://lore.kernel.org/all/b53a04a2-ba1f-3858-84c1-d3eb3301ae15@hartkopp.net Signed-off-by: Michal Sojka <michal.sojka@cvut.cz> Reported-by: Jakub Jira <jirajak2@fel.cvut.cz> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/all/20230331125511.372783-1-michal.sojka@cvut.cz Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-04-05can: isotp: isotp_recvmsg(): use sock_recv_cmsgs() to get SOCK_RXQ_OVFL infosOliver Hartkopp1-1/+1
isotp.c was still using sock_recv_timestamp() which does not provide control messages to detect dropped PDUs in the receive path. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230330170248.62342-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-04-05can: j1939: j1939_tp_tx_dat_new(): fix out-of-bounds memory accessOleksij Rempel1-1/+4
In the j1939_tp_tx_dat_new() function, an out-of-bounds memory access could occur during the memcpy() operation if the size of skb->cb is larger than the size of struct j1939_sk_buff_cb. This is because the memcpy() operation uses the size of skb->cb, leading to a read beyond the struct j1939_sk_buff_cb. Updated the memcpy() operation to use the size of struct j1939_sk_buff_cb instead of the size of skb->cb. This ensures that the memcpy() operation only reads the memory within the bounds of struct j1939_sk_buff_cb, preventing out-of-bounds memory access. Additionally, add a BUILD_BUG_ON() to check that the size of skb->cb is greater than or equal to the size of struct j1939_sk_buff_cb. This ensures that the skb->cb buffer is large enough to hold the j1939_sk_buff_cb structure. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Reported-by: Shuangpeng Bai <sjb7183@psu.edu> Tested-by: Shuangpeng Bai <sjb7183@psu.edu> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://groups.google.com/g/syzkaller/c/G_LL-C3plRs/m/-8xCi6dCAgAJ Link: https://lore.kernel.org/all/20230404073128.3173900-1-o.rempel@pengutronix.de Cc: stable@vger.kernel.org [mkl: rephrase commit message] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-03-28can: isotp: add module parameter for maximum pdu sizeOliver Hartkopp1-9/+56
With ISO 15765-2:2016 the PDU size is not limited to 2^12 - 1 (4095) bytes but can be represented as a 32 bit unsigned integer value which allows 2^32 - 1 bytes (~4GB). The use-cases like automotive unified diagnostic services (UDS) and flashing of ECUs still use the small static buffers which are provided at socket creation time. When a use-case requires to transfer PDUs up to 1025 kByte the maximum PDU size can now be extended by setting the module parameter max_pdu_size. The extended size buffers are only allocated on a per-socket/connection base when needed at run-time. changes since v2: https://lore.kernel.org/all/20230313172510.3851-1-socketcan@hartkopp.net - use ARRAY_SIZE() to reference DEFAULT_MAX_PDU_SIZE only at one place changes since v1: https://lore.kernel.org/all/20230311143446.3183-1-socketcan@hartkopp.net - limit the minimum 'max_pdu_size' to 4095 to maintain the classic behavior before ISO 15765-2:2016 Link: https://github.com/raspberrypi/linux/issues/5371 Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230326115911.15094-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-03-27can: bcm: bcm_tx_setup(): fix KMSAN uninit-value in vfs_writeIvan Orlov1-6/+10
Syzkaller reported the following issue: ===================================================== BUG: KMSAN: uninit-value in aio_rw_done fs/aio.c:1520 [inline] BUG: KMSAN: uninit-value in aio_write+0x899/0x950 fs/aio.c:1600 aio_rw_done fs/aio.c:1520 [inline] aio_write+0x899/0x950 fs/aio.c:1600 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019 __do_sys_io_submit fs/aio.c:2078 [inline] __se_sys_io_submit+0x293/0x770 fs/aio.c:2048 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook mm/slab.h:766 [inline] slab_alloc_node mm/slub.c:3452 [inline] __kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491 __do_kmalloc_node mm/slab_common.c:967 [inline] __kmalloc+0x11d/0x3b0 mm/slab_common.c:981 kmalloc_array include/linux/slab.h:636 [inline] bcm_tx_setup+0x80e/0x29d0 net/can/bcm.c:930 bcm_sendmsg+0x3a2/0xce0 net/can/bcm.c:1351 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] sock_write_iter+0x495/0x5e0 net/socket.c:1108 call_write_iter include/linux/fs.h:2189 [inline] aio_write+0x63a/0x950 fs/aio.c:1600 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019 __do_sys_io_submit fs/aio.c:2078 [inline] __se_sys_io_submit+0x293/0x770 fs/aio.c:2048 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 1 PID: 5034 Comm: syz-executor350 Not tainted 6.2.0-rc6-syzkaller-80422-geda666ff2276 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 ===================================================== We can follow the call chain and find that 'bcm_tx_setup' function calls 'memcpy_from_msg' to copy some content to the newly allocated frame of 'op->frames'. After that the 'len' field of copied structure being compared with some constant value (64 or 8). However, if 'memcpy_from_msg' returns an error, we will compare some uninitialized memory. This triggers 'uninit-value' issue. This patch will add 'memcpy_from_msg' possible errors processing to avoid uninit-value issue. Tested via syzkaller Reported-by: syzbot+c9bfd85eca611ebf5db1@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=47f897f8ad958bbde5790ebf389b5e7e0a345089 Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> Fixes: 6f3b911d5f29b ("can: bcm: add support for CAN FD frames") Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230314120445.12407-1-ivan.orlov0322@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-03-27can: j1939: prevent deadlock by moving j1939_sk_errqueue()Oleksij Rempel1-2/+6
This commit addresses a deadlock situation that can occur in certain scenarios, such as when running data TP/ETP transfer and subscribing to the error queue while receiving a net down event. The deadlock involves locks in the following order: 3 j1939_session_list_lock -> active_session_list_lock j1939_session_activate ... j1939_sk_queue_activate_next -> sk_session_queue_lock ... j1939_xtp_rx_eoma_one 2 j1939_sk_queue_drop_all -> sk_session_queue_lock ... j1939_sk_netdev_event_netdown -> j1939_socks_lock j1939_netdev_notify 1 j1939_sk_errqueue -> j1939_socks_lock __j1939_session_cancel -> active_session_list_lock j1939_tp_rxtimer CPU0 CPU1 ---- ---- lock(&priv->active_session_list_lock); lock(&jsk->sk_session_queue_lock); lock(&priv->active_session_list_lock); lock(&priv->j1939_socks_lock); The solution implemented in this commit is to move the j1939_sk_errqueue() call out of the active_session_list_lock context, thus preventing the deadlock situation. Reported-by: syzbot+ee1cd780f69483a8616b@syzkaller.appspotmail.com Fixes: 5b9272e93f2e ("can: j1939: extend UAPI to notify about RX status") Co-developed-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20230324130141.2132787-1-o.rempel@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+40
net/devlink/leftover.c / net/core/devlink.c: 565b4824c39f ("devlink: change port event netdev notifier from per-net to global") f05bd8ebeb69 ("devlink: move code to a dedicated directory") 687125b5799c ("devlink: split out core code") https://lore.kernel.org/all/20230208094657.379f2b1a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-08can: raw: use temp variable instead of rolling back configOliver Hartkopp1-5/+6
Introduce a temporary variable to check for an invalid configuration attempt from user space. Before this patch the value was copied to the real config variable and rolled back in the case of an error. Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230203090807.97100-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-07Merge tag 'linux-can-next-for-6.3-20230206' of ↵Paolo Abeni2-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2023-02-06 this is a pull request of 47 patches for net-next/master. The first two patch is by Oliver Hartkopp. One adds missing error checking to the CAN_GW protocol, the other adds a missing CAN address family check to the CAN ISO TP protocol. Thomas Kopp contributes a performance optimization to the mcp251xfd driver. The next 11 patches are by Geert Uytterhoeven and add support for R-Car V4H systems to the rcar_canfd driver. Stephane Grosjean and Lukas Magel contribute 8 patches to the peak_usb driver, which add support for configurable CAN channel ID. The last 17 patches are by me and target the CAN bit timing configuration. The bit timing is cleaned up, error messages are improved and forwarded to user space via NL_SET_ERR_MSG_FMT() instead of netdev_err(), and the SJW handling is updated, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. * tag 'linux-can-next-for-6.3-20230206' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (47 commits) can: bittiming: can_validate_bitrate(): report error via netlink can: bittiming: can_calc_bittiming(): convert from netdev_err() to NL_SET_ERR_MSG_FMT() can: bittiming: can_calc_bittiming(): clean up SJW handling can: bittiming: can_sjw_set_default(): use Phase Seg2 / 2 as default for SJW can: bittiming: can_sjw_check(): check that SJW is not longer than either Phase Buffer Segment can: bittiming: can_sjw_check(): report error via netlink and harmonize error value can: bittiming: can_fixup_bittiming(): report error via netlink and harmonize error value can: bittiming: factor out can_sjw_set_default() and can_sjw_check() can: bittiming: can_changelink() pass extack down callstack can: netlink: can_changelink(): convert from netdev_err() to NL_SET_ERR_MSG_FMT() can: netlink: can_validate(): validate sample point for CAN and CAN-FD can: dev: register_candev(): bail out if both fixed bit rates and bit timing constants are provided can: dev: register_candev(): ensure that bittiming const are valid can: bittiming: can_get_bittiming(): use direct return and remove unneeded else can: bittiming: can_fixup_bittiming(): set effective tq can: bittiming: can_fixup_bittiming(): use CAN_SYNC_SEG instead of 1 can: bittiming(): replace open coded variants of can_bit_time() can: peak_usb: Reorder include directives alphabetically can: peak_usb: align CAN channel ID format in log with sysfs attribute can: peak_usb: export PCAN CAN channel ID as sysfs device attribute ... ==================== Link: https://lore.kernel.org/r/20230206131620.2758724-1-mkl@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-07can: j1939: do not wait 250 ms if the same addr was already claimedDevid Antonio Filoni1-0/+40
The ISO 11783-5 standard, in "4.5.2 - Address claim requirements", states: d) No CF shall begin, or resume, transmission on the network until 250 ms after it has successfully claimed an address except when responding to a request for address-claimed. But "Figure 6" and "Figure 7" in "4.5.4.2 - Address-claim prioritization" show that the CF begins the transmission after 250 ms from the first AC (address-claimed) message even if it sends another AC message during that time window to resolve the address contention with another CF. As stated in "4.4.2.3 - Address-claimed message": In order to successfully claim an address, the CF sending an address claimed message shall not receive a contending claim from another CF for at least 250 ms. As stated in "4.4.3.2 - NAME management (NM) message": 1) A commanding CF can d) request that a CF with a specified NAME transmit the address- claimed message with its current NAME. 2) A target CF shall d) send an address-claimed message in response to a request for a matching NAME Taking the above arguments into account, the 250 ms wait is requested only during network initialization. Do not restart the timer on AC message if both the NAME and the address match and so if the address has already been claimed (timer has expired) or the AC message has been sent to resolve the contention with another CF (timer is still running). Signed-off-by: Devid Antonio Filoni <devid.filoni@egluetechnologies.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20221125170418.34575-1-devid.filoni@egluetechnologies.com Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02can: isotp: check CAN address family in isotp_bind()Oliver Hartkopp1-0/+3
Add missing check to block non-AF_CAN binds. Syzbot created some code which matched the right sockaddr struct size but used AF_XDP (0x2C) instead of AF_CAN (0x1D) in the address family field: bind$xdp(r2, &(0x7f0000000540)={0x2c, 0x0, r4, 0x0, r2}, 0x10) ^^^^ This has no funtional impact but the userspace should be notified about the wrong address family field content. Link: https://syzkaller.appspot.com/text?tag=CrashLog&x=11ff9d8c480000 Reported-by: syzbot+5aed6c3aaba661f5b917@syzkaller.appspotmail.com Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230104201844.13168-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-02 16:45:24 +0300