summaryrefslogtreecommitdiff
path: root/net/bluetooth
AgeCommit message (Collapse)AuthorFilesLines
2020-07-30Bluetooth: Let controller creates RPA during le create connSathish Narasimman1-1/+7
When address resolution is enabled and set_privacy is enabled let's use own address type as 0x03 Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-30Bluetooth: Translate additional address type during le_connSathish Narasimman1-0/+16
When using controller based address resolution, then the new address types 0x02 and 0x03 are used. These types need to be converted back into either public address or random address types. This patch is specially during LE_CREATE_CONN if using own_add_type as 0x02 or 0x03. Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-30Bluetooth: Update resolving list when updating whitelistMarcel Holtmann1-2/+39
When the whitelist is updated, then also update the entries of the resolving list for devices where IRKs are available. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sathish Narsimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-30Bluetooth: Configure controller address resolution if availableMarcel Holtmann1-3/+23
When the LL Privacy support is available, then as part of enabling or disabling passive background scanning, it is required to set up the controller based address resolution as well. Since only passive background scanning is utilizing the whitelist, the address resolution is now bound to the whitelist and passive background scanning. All other resolution can be easily done by the host stack. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sathish Narsimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-30Bluetooth: Translate additional address type correctlyMarcel Holtmann1-0/+9
When using controller based address resolution, then the new address types 0x02 and 0x03 are used. These types need to be converted back into either public address or random address types. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sathish Narsimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-28Bluetooth: Fix suspend notifier raceAbhishek Pandit-Subedi1-2/+3
Unregister from suspend notifications and cancel suspend preparations before running hci_dev_do_close. Otherwise, the suspend notifier may race with unregister and cause cmd_timeout even after hdev has been freed. Below is the trace from when this panic was seen: [ 832.578518] Bluetooth: hci_core.c:hci_cmd_timeout() hci0: command 0x0c05 tx timeout [ 832.586200] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 832.586203] #PF: supervisor read access in kernel mode [ 832.586205] #PF: error_code(0x0000) - not-present page [ 832.586206] PGD 0 P4D 0 [ 832.586210] PM: suspend exit [ 832.608870] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 832.613232] CPU: 3 PID: 10755 Comm: kworker/3:7 Not tainted 5.4.44-04894-g1e9dbb96a161 #1 [ 832.630036] Workqueue: events hci_cmd_timeout [bluetooth] [ 832.630046] RIP: 0010:__queue_work+0xf0/0x374 [ 832.630051] RSP: 0018:ffff9b5285f1fdf8 EFLAGS: 00010046 [ 832.674033] RAX: ffff8a97681bac00 RBX: 0000000000000000 RCX: ffff8a976a000600 [ 832.681162] RDX: 0000000000000000 RSI: 0000000000000009 RDI: ffff8a976a000748 [ 832.688289] RBP: ffff9b5285f1fe38 R08: 0000000000000000 R09: ffff8a97681bac00 [ 832.695418] R10: 0000000000000002 R11: ffff8a976a0006d8 R12: ffff8a9745107600 [ 832.698045] usb 1-6: new full-speed USB device number 119 using xhci_hcd [ 832.702547] R13: ffff8a9673658850 R14: 0000000000000040 R15: 000000000000001e [ 832.702549] FS: 0000000000000000(0000) GS:ffff8a976af80000(0000) knlGS:0000000000000000 [ 832.702550] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 832.702550] CR2: 0000000000000000 CR3: 000000010415a000 CR4: 00000000003406e0 [ 832.702551] Call Trace: [ 832.702558] queue_work_on+0x3f/0x68 [ 832.702562] process_one_work+0x1db/0x396 [ 832.747397] worker_thread+0x216/0x375 [ 832.751147] kthread+0x138/0x140 [ 832.754377] ? pr_cont_work+0x58/0x58 [ 832.758037] ? kthread_blkcg+0x2e/0x2e [ 832.761787] ret_from_fork+0x22/0x40 [ 832.846191] ---[ end trace fa93f466da517212 ]--- Fixes: 9952d90ea2885 ("Bluetooth: Handle PM_SUSPEND_PREPARE and PM_POST_SUSPEND") Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-28Bluetooth: Return NOTIFY_DONE for hci_suspend_notifierMax Chou1-1/+1
The original return is NOTIFY_STOP, but notifier_call_chain would stop the future call for register_pm_notifier even registered on other Kernel modules with the same priority which value is zero. Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-28Bluetooth: btusb: Fix and detect most of the Chinese Bluetooth controllersIsmael Ferreras Morezuelas1-2/+4
For some reason they tend to squat on the very first CSR/ Cambridge Silicon Radio VID/PID instead of paying fees. This is an extremely common problem; the issue goes as back as 2013 and these devices are only getting more popular, even rebranded by reputable vendors and sold by retailers everywhere. So, at this point in time there are hundreds of modern dongles reusing the ID of what originally was an early Bluetooth 1.1 controller. Linux is the only place where they don't work due to spotty checks in our detection code. It only covered a minimum subset. So what's the big idea? Take advantage of the fact that all CSR chips report the same internal version as both the LMP sub-version and HCI revision number. It always matches, couple that with the manufacturer code, that rarely lies, and we now have a good idea of who is who. Additionally, by compiling a list of user-reported HCI/lsusb dumps, and searching around for legit CSR dongles in similar product ranges we can find what CSR BlueCore firmware supported which Bluetooth versions. That way we can narrow down ranges of fakes for each of them. e.g. Real CSR dongles with LMP subversion 0x73 are old enough that support BT 1.1 only; so it's a dead giveaway when some third-party BT 4.0 dongle reuses it. So, to sum things up; there are multiple classes of fake controllers reusing the same 0A12:0001 VID/PID. This has been broken for a while. Known 'fake' bcdDevices: 0x0100, 0x0134, 0x1915, 0x2520, 0x7558, 0x8891 IC markings on 0x7558: FR3191AHAL 749H15143 (???) https://bugzilla.kernel.org/show_bug.cgi?id=60824 Fixes: 81cac64ba258ae (Deal with USB devices that are faking CSR vendor) Reported-by: Michał Wiśniewski <brylozketrzyn@gmail.com> Tested-by: Mike Johnson <yuyuyak@gmail.com> Tested-by: Ricardo Rodrigues <ekatonb@gmail.com> Tested-by: M.Hanny Sabbagh <mhsabbagh@outlook.com> Tested-by: Oussama BEN BRAHIM <b.brahim.oussama@gmail.com> Tested-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com> Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-25net: pass a sockptr_t into ->setsockoptChristoph Hellwig4-23/+25
Rework the remaining setsockopt code to pass a sockptr_t instead of a plain user pointer. This removes the last remaining set_fs(KERNEL_DS) outside of architecture specific code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154] Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: make ->{get,set}sockopt in proto_ops optionalChristoph Hellwig3-6/+0
Just check for a NULL method instead of wiring up sock_no_{get,set}sockopt. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-15Bluetooth: Add per-instance adv disable/removeDaniel Winkler4-10/+59
Add functionality to disable and remove advertising instances, and use that functionality in MGMT add/remove advertising calls. Currently, advertising is globally-disabled, i.e. all instances are disabled together, even if hardware offloading is available. This patch adds functionality to disable and remove individual adv instances, solving two issues: 1. On new advertisement registration, a global disable was done, and then only the new instance was enabled. This meant only the newest instance was actually enabled. 2. On advertisement removal, the structure was removed, but the instance was never disabled or removed, which is incorrect with hardware offload support. Signed-off-by: Daniel Winkler <danielwinkler@google.com> Reviewed-by: Shyh-In Hwang <josephsih@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-13Bluetooth: Prevent out-of-bounds read in hci_inquiry_result_with_rssi_evt()Peilin Ye1-0/+7
Check `num_rsp` before using it as for-loop counter. Add `unlock` label. Cc: stable@vger.kernel.org Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-13Bluetooth: Prevent out-of-bounds read in hci_inquiry_result_evt()Peilin Ye1-1/+1
Check `num_rsp` before using it as for-loop counter. Cc: stable@vger.kernel.org Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-10Replace HTTP links with HTTPS ones: BLUETOOTH SUBSYSTEMAlexander A. Klimov1-1/+1
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-10Bluetooth: RFCOMM: Use fallthrough pseudo-keywordGustavo A. R. Silva2-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-10Bluetooth: core: Use fallthrough pseudo-keywordGustavo A. R. Silva6-19/+17
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-10Bluetooth: Fix slab-out-of-bounds read in hci_extended_inquiry_result_evt()Peilin Ye1-1/+1
Check upon `num_rsp` is insufficient. A malformed event packet with a large `num_rsp` number makes hci_extended_inquiry_result_evt() go out of bounds. Fix it. This patch fixes the following syzbot bug: https://syzkaller.appspot.com/bug?id=4bf11aa05c4ca51ce0df86e500fce486552dc8d2 Reported-by: syzbot+d8489a79b781849b9c46@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-08Bluetooth: Use whitelist for scan policy when suspendingMiao-chen Chou1-2/+3
Even with one advertisement monitor in place, the scan policy should use the whitelist while the system is going to suspend to prevent waking by random advertisement. The following test was performed. - With a paired device, register one advertisement monitor, suspend the system and verify that the host was not awaken by random advertisements. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-07Bluetooth: le_simult_central_peripheral experimental featureAlain Michaud1-2/+23
This patch adds an le_simult_central_peripheral features which allows a clients to determine if the controller is able to support peripheral and central connections separately and at the same time. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-07Bluetooth: Fix kernel oops triggered by hci_adv_monitors_clear()Miao-chen Chou1-2/+0
This fixes the kernel oops by removing unnecessary background scan update from hci_adv_monitors_clear() which shouldn't invoke any work queue. The following test was performed. - Run "rmmod btusb" and verify that no kernel oops is triggered. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-07Bluetooth: use configured default params for active scansAlain Michaud1-5/+6
This patch fixes active scans to use the configured default parameters. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-07Bluetooth: Adding a configurable autoconnect timeoutAlain Michaud3-1/+15
This patch adds a configurable LE autoconnect timeout. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-24Bluetooth: Don't restart scanning if pausedAbhishek Pandit-Subedi1-0/+10
When restarting LE scanning, check if it's currently paused before enabling passive scanning. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-23Bluetooth: add a mutex lock to avoid UAF in do_enale_setLihong Kou1-0/+5
In the case we set or free the global value listen_chan in different threads, we can encounter the UAF problems because the method is not protected by any lock, add one to avoid this bug. BUG: KASAN: use-after-free in l2cap_chan_close+0x48/0x990 net/bluetooth/l2cap_core.c:730 Read of size 8 at addr ffff888096950000 by task kworker/1:102/2868 CPU: 1 PID: 2868 Comm: kworker/1:102 Not tainted 5.5.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events do_enable_set Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1fb/0x318 lib/dump_stack.c:118 print_address_description+0x74/0x5c0 mm/kasan/report.c:374 __kasan_report+0x149/0x1c0 mm/kasan/report.c:506 kasan_report+0x26/0x50 mm/kasan/common.c:641 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135 l2cap_chan_close+0x48/0x990 net/bluetooth/l2cap_core.c:730 do_enable_set+0x660/0x900 net/bluetooth/6lowpan.c:1074 process_one_work+0x7f5/0x10f0 kernel/workqueue.c:2264 worker_thread+0xbbc/0x1630 kernel/workqueue.c:2410 kthread+0x332/0x350 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Allocated by task 2870: save_stack mm/kasan/common.c:72 [inline] set_track mm/kasan/common.c:80 [inline] __kasan_kmalloc+0x118/0x1c0 mm/kasan/common.c:515 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:529 kmem_cache_alloc_trace+0x221/0x2f0 mm/slab.c:3551 kmalloc include/linux/slab.h:555 [inline] kzalloc include/linux/slab.h:669 [inline] l2cap_chan_create+0x50/0x320 net/bluetooth/l2cap_core.c:446 chan_create net/bluetooth/6lowpan.c:640 [inline] bt_6lowpan_listen net/bluetooth/6lowpan.c:959 [inline] do_enable_set+0x6a4/0x900 net/bluetooth/6lowpan.c:1078 process_one_work+0x7f5/0x10f0 kernel/workqueue.c:2264 worker_thread+0xbbc/0x1630 kernel/workqueue.c:2410 kthread+0x332/0x350 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Freed by task 2870: save_stack mm/kasan/common.c:72 [inline] set_track mm/kasan/common.c:80 [inline] kasan_set_free_info mm/kasan/common.c:337 [inline] __kasan_slab_free+0x12e/0x1e0 mm/kasan/common.c:476 kasan_slab_free+0xe/0x10 mm/kasan/common.c:485 __cache_free mm/slab.c:3426 [inline] kfree+0x10d/0x220 mm/slab.c:3757 l2cap_chan_destroy net/bluetooth/l2cap_core.c:484 [inline] kref_put include/linux/kref.h:65 [inline] l2cap_chan_put+0x170/0x190 net/bluetooth/l2cap_core.c:498 do_enable_set+0x66c/0x900 net/bluetooth/6lowpan.c:1075 process_one_work+0x7f5/0x10f0 kernel/workqueue.c:2264 worker_thread+0xbbc/0x1630 kernel/workqueue.c:2410 kthread+0x332/0x350 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 The buggy address belongs to the object at ffff888096950000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 0 bytes inside of 2048-byte region [ffff888096950000, ffff888096950800) The buggy address belongs to the page: page:ffffea00025a5400 refcount:1 mapcount:0 mapping:ffff8880aa400e00 index:0x0 flags: 0xfffe0000000200(slab) raw: 00fffe0000000200 ffffea00027d1548 ffffea0002397808 ffff8880aa400e00 raw: 0000000000000000 ffff888096950000 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88809694ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88809694ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888096950000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888096950080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888096950100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Reported-by: syzbot+96414aa0033c363d8458@syzkaller.appspotmail.com Signed-off-by: Lihong Kou <koulihong@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-22Bluetooth: Disconnect if E0 is used for Level 4Luiz Augusto von Dentz2-12/+25
E0 is not allowed with Level 4: BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 3, Part C page 1319: '128-bit equivalent strength for link and encryption keys required using FIPS approved algorithms (E0 not allowed, SAFER+ not allowed, and P-192 not allowed; encryption key not shortened' SC enabled: > HCI Event: Read Remote Extended Features (0x23) plen 13 Status: Success (0x00) Handle: 256 Page: 1/2 Features: 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Secure Simple Pairing (Host Support) LE Supported (Host) Secure Connections (Host Support) > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 256 Encryption: Enabled with AES-CCM (0x02) SC disabled: > HCI Event: Read Remote Extended Features (0x23) plen 13 Status: Success (0x00) Handle: 256 Page: 1/2 Features: 0x03 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Secure Simple Pairing (Host Support) LE Supported (Host) > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 256 Encryption: Enabled with E0 (0x01) [May 8 20:23] Bluetooth: hci0: Invalid security: expect AES but E0 was used < HCI Command: Disconnect (0x01|0x0006) plen 3 Handle: 256 Reason: Authentication Failure (0x05) Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-22Bluetooth: use configured params for ext advAlain Michaud1-4/+3
When the extended advertisement feature is enabled, a hardcoded min and max interval of 0x8000 is used. This patch fixes this issue by using the configured min/max value. This was validated by setting min/max in main.conf and making sure the right setting is applied: < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 #93 [hci0] 10.953011 … Min advertising interval: 181.250 msec (0x0122) Max advertising interval: 181.250 msec (0x0122) … Signed-off-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-22Bluetooth: Add hci_dev_lock to get/set device flagsAbhishek Pandit-Subedi1-0/+8
Adding hci_dev_lock since hci_conn_params_(lookup|add) require this lock. Suggested-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-18Bluetooth: mgmt: Use command complete on success for set system configMarcel Holtmann1-3/+2
The command status reply is only for failure. When completing set system config command, the reply has to be command complete. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Terminate the link if pairing is cancelledManish Mandlik3-9/+30
If user decides to cancel the ongoing pairing process (e.g. by clicking the cancel button on pairing/passkey window), abort any ongoing pairing and then terminate the link if it was created because of the pair device action. Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Update background scan and report device based on advertisement ↵Miao-chen Chou4-6/+34
monitors This calls hci_update_background_scan() when there is any update on the advertisement monitors. If there is at least one advertisement monitor, the filtering policy of scan parameters should be 0x00. This also reports device found mgmt events if there is at least one monitor. The following cases were tested with btmgmt advmon-* commands. (1) add a ADV monitor and observe that the passive scanning is triggered. (2) remove the last ADV monitor and observe that the passive scanning is terminated. (3) with a LE peripheral paired, repeat (1) and observe the passive scanning continues. (4) with a LE peripheral paired, repeat (2) and observe the passive scanning continues. (5) with a ADV monitor, suspend/resume the host and observe the passive scanning continues. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Notify adv monitor removed eventMiao-chen Chou1-0/+16
This notifies management sockets on MGMT_EV_ADV_MONITOR_REMOVED event. The following test was performed. - Start two btmgmt consoles, issue a btmgmt advmon-remove command on one console and observe a MGMT_EV_ADV_MONITOR_REMOVED event on the other. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Notify adv monitor added eventMiao-chen Chou1-1/+17
This notifies management sockets on MGMT_EV_ADV_MONITOR_ADDED event. The following test was performed. - Start two btmgmt consoles, issue a btmgmt advmon-add command on one console and observe a MGMT_EV_ADV_MONITOR_ADDED event on the other Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Add handler of MGMT_OP_REMOVE_ADV_MONITORMiao-chen Chou2-0/+66
This adds the request handler of MGMT_OP_REMOVE_ADV_MONITOR command. Note that the controller-based monitoring is not yet in place. This removes the internal monitor(s) without sending HCI traffic, so the request returns immediately. The following test was performed. - Issue btmgmt advmon-remove with valid and invalid handles. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Add handler of MGMT_OP_ADD_ADV_PATTERNS_MONITORMiao-chen Chou2-0/+140
This adds the request handler of MGMT_OP_ADD_ADV_PATTERNS_MONITOR command. Note that the controller-based monitoring is not yet in place. This tracks the content of the monitor without sending HCI traffic, so the request returns immediately. The following manual test was performed. - Issue btmgmt advmon-add with valid and invalid inputs. - Issue btmgmt advmon-add more the allowed number of monitors. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Add handler of MGMT_OP_READ_ADV_MONITOR_FEATURESMiao-chen Chou4-1/+73
This adds the request handler of MGMT_OP_READ_ADV_MONITOR_FEATURES command. Since the controller-based monitoring is not yet in place, this report only the supported features but not the enabled features. The following test was performed. - Issuing btmgmt advmon-features. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Add get/set device flags mgmt opAbhishek Pandit-Subedi1-0/+128
Add the get device flags and set device flags mgmt ops and the device flags changed event. Their behavior is described in detail in mgmt-api.txt in bluez. Sample btmon trace when a HID device is added (trimmed to 75 chars): @ MGMT Command: Unknown (0x0050) plen 11 {0x0001} [hci0] 18:06:14.98 90 c5 13 cd f3 cd 02 01 00 00 00 ........... @ MGMT Event: Unknown (0x002a) plen 15 {0x0004} [hci0] 18:06:14.98 90 c5 13 cd f3 cd 02 01 00 00 00 01 00 00 00 ............... @ MGMT Event: Unknown (0x002a) plen 15 {0x0003} [hci0] 18:06:14.98 90 c5 13 cd f3 cd 02 01 00 00 00 01 00 00 00 ............... @ MGMT Event: Unknown (0x002a) plen 15 {0x0002} [hci0] 18:06:14.98 90 c5 13 cd f3 cd 02 01 00 00 00 01 00 00 00 ............... @ MGMT Event: Command Compl.. (0x0001) plen 10 {0x0001} [hci0] 18:06:14.98 Unknown (0x0050) plen 7 Status: Success (0x00) 90 c5 13 cd f3 cd 02 ....... @ MGMT Command: Add Device (0x0033) plen 8 {0x0001} [hci0] 18:06:14.98 LE Address: CD:F3:CD:13:C5:90 (Static) Action: Auto-connect remote device (0x02) @ MGMT Event: Device Added (0x001a) plen 8 {0x0004} [hci0] 18:06:14.98 LE Address: CD:F3:CD:13:C5:90 (Static) Action: Auto-connect remote device (0x02) @ MGMT Event: Device Added (0x001a) plen 8 {0x0003} [hci0] 18:06:14.98 LE Address: CD:F3:CD:13:C5:90 (Static) Action: Auto-connect remote device (0x02) @ MGMT Event: Device Added (0x001a) plen 8 {0x0002} [hci0] 18:06:14.98 LE Address: CD:F3:CD:13:C5:90 (Static) Action: Auto-connect remote device (0x02) @ MGMT Event: Unknown (0x002a) plen 15 {0x0004} [hci0] 18:06:14.98 90 c5 13 cd f3 cd 02 01 00 00 00 01 00 00 00 ............... @ MGMT Event: Unknown (0x002a) plen 15 {0x0003} [hci0] 18:06:14.98 90 c5 13 cd f3 cd 02 01 00 00 00 01 00 00 00 ............... @ MGMT Event: Unknown (0x002a) plen 15 {0x0002} [hci0] 18:06:14.98 90 c5 13 cd f3 cd 02 01 00 00 00 01 00 00 00 ............... @ MGMT Event: Unknown (0x002a) plen 15 {0x0001} [hci0] 18:06:14.98 90 c5 13 cd f3 cd 02 01 00 00 00 01 00 00 00 ............... Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Replace wakeable in hci_conn_paramsAbhishek Pandit-Subedi1-1/+2
Replace the wakeable boolean with flags in hci_conn_params and all users of this boolean. This will be used by the get/set device flags mgmt op. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Replace wakeable list with flagAbhishek Pandit-Subedi2-5/+8
Since the classic device list now supports flags, convert the wakeable list into a flag on the existing device list. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Add bdaddr_list_with_flags for classic whitelistAbhishek Pandit-Subedi3-6/+65
In order to more easily add device flags to classic devices, create a new type of bdaddr_list that supports setting flags. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: mgmt: Add commands for runtime configurationMarcel Holtmann3-0/+31
This adds the required read/set commands for runtime configuration. Even while currently no parameters are specified, the commands are made available. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-12Bluetooth: implement read/set default system parameters mgmtAlain Michaud4-1/+273
This patch implements the read default system parameters and the set default system parameters mgmt commands. Signed-off-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-12Bluetooth: centralize default value initialization.Alain Michaud3-21/+22
This patch centralized the initialization of default parameters. This is required to allow clients to more easily customize the default system parameters. Signed-off-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-12Bluetooth: Use only 8 bits for the HCI CMSG state flagsAlain Michaud1-2/+2
This change implements suggestions from the code review of the SCO CMSG state flag patch. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-12Bluetooth: Add support for BT_PKT_STATUS CMSG data for SCO connectionsAlain Michaud3-0/+36
This change adds support for reporting the BT_PKT_STATUS to the socket CMSG data to allow the implementation of a packet loss correction on erroneous data received on the SCO socket. The patch was partially developed by Marcel Holtmann and validated by Hsin-yu Chao. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-08Bluetooth: Allow suspend even when preparation has failedAbhishek Pandit-Subedi1-7/+10
It is preferable to allow suspend even when Bluetooth has problems preparing for sleep. When Bluetooth fails to finish preparing for suspend, log the error and allow the suspend notifier to continue instead. To also make it clearer why suspend failed, change bt_dev_dbg to bt_dev_err when handling the suspend timeout. Fixes: dd522a7429b07e ("Bluetooth: Handle LE devices during suspend") Reported-by: Len Brown <len.brown@intel.com> Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds17-259/+960
Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...
2020-06-03Bluetooth: Removing noisy dbg messageAlain Michaud1-2/+0
This patch removes a particularly noisy dbg message. The debug message isn't particularly interesting for debuggability so it was simply removed to reduce noise in dbg logs. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-03Bluetooth: Check scan state before disabling during suspendManish Mandlik1-4/+6
Check current scan state by checking HCI_LE_SCAN flag and send scan disable command only if scan is already enabled. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-29Bluetooth: Acquire sk_lock.slock without disabling interruptsSebastian Andrzej Siewior1-5/+2
There was a lockdep which led to commit fad003b6c8e3d ("Bluetooth: Fix inconsistent lock state with RFCOMM") Lockdep noticed that `sk->sk_lock.slock' was acquired without disabling the softirq while the lock was also used in softirq context. Unfortunately the solution back then was to disable interrupts before acquiring the lock which however made lockdep happy. It would have been enough to simply disable the softirq. Disabling interrupts before acquiring a spinlock_t is not allowed on PREEMPT_RT because these locks are converted to 'sleeping' spinlocks. Use spin_lock_bh() in order to acquire the `sk_lock.slock'. Reported-by: Luis Claudio R. Goncalves <lclaudio@uudg.org> Reported-by: kbuild test robot <lkp@intel.com> [missing unlock] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-20Bluetooth: Fix assuming EIR flags can result in SSP authenticationLuiz Augusto von Dentz1-2/+0
EIR flags should just hint if SSP may be supported but we shall verify this with use of the actual features as the SSP bits may be disabled in the lower layers which would result in legacy authentication to be used. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-11 23:49:55 +0300