summaryrefslogtreecommitdiff
path: root/net/bluetooth
AgeCommit message (Collapse)AuthorFilesLines
2020-06-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds17-259/+960
Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...
2020-05-29Bluetooth: Acquire sk_lock.slock without disabling interruptsSebastian Andrzej Siewior1-5/+2
There was a lockdep which led to commit fad003b6c8e3d ("Bluetooth: Fix inconsistent lock state with RFCOMM") Lockdep noticed that `sk->sk_lock.slock' was acquired without disabling the softirq while the lock was also used in softirq context. Unfortunately the solution back then was to disable interrupts before acquiring the lock which however made lockdep happy. It would have been enough to simply disable the softirq. Disabling interrupts before acquiring a spinlock_t is not allowed on PREEMPT_RT because these locks are converted to 'sleeping' spinlocks. Use spin_lock_bh() in order to acquire the `sk_lock.slock'. Reported-by: Luis Claudio R. Goncalves <lclaudio@uudg.org> Reported-by: kbuild test robot <lkp@intel.com> [missing unlock] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-20Bluetooth: Fix assuming EIR flags can result in SSP authenticationLuiz Augusto von Dentz1-2/+0
EIR flags should just hint if SSP may be supported but we shall verify this with use of the actual features as the SSP bits may be disabled in the lower layers which would result in legacy authentication to be used. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-20Bluetooth: Consolidate encryption handling in hci_encrypt_cfmLuiz Augusto von Dentz1-25/+3
This makes hci_encrypt_cfm calls hci_connect_cfm in case the connection state is BT_CONFIG so callers don't have to check the state. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-18Bluetooth: Add SCO fallback for invalid LMP parameters errorHsin-Yu Chao1-0/+1
Bluetooth PTS test case HFP/AG/ACC/BI-12-I accepts SCO connection with invalid parameter at the first SCO request expecting AG to attempt another SCO request with the use of "safe settings" for given codec, base on section 5.7.1.2 of HFP 1.7 specification. This patch addresses it by adding "Invalid LMP Parameters" (0x1e) to the SCO fallback case. Verified with below log: < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 Handle: 256 Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x0380 3-EV3 may not be used 2-EV5 may not be used 3-EV5 may not be used > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) ncmd 1 Status: Success (0x00) > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Max Slots Change (0x1b) plen 3 Handle: 256 Max slots: 1 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 Status: Invalid LMP Parameters / Invalid LL Parameters (0x1e) Handle: 0 Address: 00:1B:DC:F2:21:59 (OUI 00-1B-DC) Link type: eSCO (0x02) Transmission interval: 0x00 Retransmission window: 0x02 RX packet length: 0 TX packet length: 0 Air mode: Transparent (0x03) < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 Handle: 256 Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 8 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x03c8 EV3 may be used 2-EV3 may not be used 3-EV3 may not be used 2-EV5 may not be used 3-EV5 may not be used > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) ncmd 1 Status: Success (0x00) > HCI Event: Max Slots Change (0x1b) plen 3 Handle: 256 Max slots: 5 > HCI Event: Max Slots Change (0x1b) plen 3 Handle: 256 Max slots: 1 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 Status: Success (0x00) Handle: 257 Address: 00:1B:DC:F2:21:59 (OUI 00-1B-DC) Link type: eSCO (0x02) Transmission interval: 0x06 Retransmission window: 0x04 RX packet length: 30 TX packet length: 30 Air mode: Transparent (0x03) Signed-off-by: Hsin-Yu Chao <hychao@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-18Bluetooth: Fix for GAP/SEC/SEM/BI-10-CŁukasz Rymanowski1-0/+4
Security Mode 1 level 4, force us to use have key size 16 octects long. This patch adds check for that. This is required for the qualification test GAP/SEC/SEM/BI-10-C Logs from test when ATT is configured with sec level BT_SECURITY_FIPS < ACL Data TX: Handle 3585 flags 0x00 dlen 11 #28 [hci0] 3.785965 SMP: Pairing Request (0x01) len 6 IO capability: DisplayYesNo (0x01) OOB data: Authentication data not present (0x00) Authentication requirement: Bonding, MITM, SC, No Keypresses (0x0d) Max encryption key size: 16 Initiator key distribution: EncKey Sign (0x05) Responder key distribution: EncKey IdKey Sign (0x07) > ACL Data RX: Handle 3585 flags 0x02 dlen 11 #35 [hci0] 3.883020 SMP: Pairing Response (0x02) len 6 IO capability: DisplayYesNo (0x01) OOB data: Authentication data not present (0x00) Authentication requirement: Bonding, MITM, SC, No Keypresses (0x0d) Max encryption key size: 7 Initiator key distribution: EncKey Sign (0x05) Responder key distribution: EncKey IdKey Sign (0x07) < ACL Data TX: Handle 3585 flags 0x00 dlen 6 #36 [hci0] 3.883136 SMP: Pairing Failed (0x05) len 1 Reason: Encryption key size (0x06) Signed-off-by: Łukasz Rymanowski <lukasz.rymanowski@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Merge branch 'for-upstream' of ↵David S. Miller10-141/+363
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2020-05-13 Here's a second attempt at a bluetooth-next pull request which supercedes the one dated 2020-05-09. This should have the issues discovered by Jakub fixed. - Add support for Intel Typhoon Peak device (8087:0032) - Add device tree bindings for Realtek RTL8723BS device - Add device tree bindings for Qualcomm QCA9377 device - Add support for experimental features configuration through mgmt - Add driver hook to prevent wake from suspend - Add support for waiting for L2CAP disconnection response - Multiple fixes & cleanups to the btbcm driver - Add support for LE scatternet topology for selected devices - A few other smaller fixes & cleanups Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13Bluetooth: L2CAP: add support for waiting disconnection respArchie Pusaka1-7/+23
Whenever we disconnect a L2CAP connection, we would immediately report a disconnection event (EPOLLHUP) to the upper layer, without waiting for the response of the other device. This patch offers an option to wait until we receive a disconnection response before reporting disconnection event, by using the "how" parameter in l2cap_sock_shutdown(). Therefore, upper layer can opt to wait for disconnection response by shutdown(sock, SHUT_WR). This can be used to enforce proper disconnection order in HID, where the disconnection of the interrupt channel must be complete before attempting to disconnect the control channel. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Bluetooth: Handle Inquiry Cancel error after Inquiry CompleteSonny Sasaka1-2/+17
After sending Inquiry Cancel command to the controller, it is possible that Inquiry Complete event comes before Inquiry Cancel command complete event. In this case the Inquiry Cancel command will have status of Command Disallowed since there is no Inquiry session to be cancelled. This case should not be treated as error, otherwise we can reach an inconsistent state. Example of a btmon trace when this happened: < HCI Command: Inquiry Cancel (0x01|0x0002) plen 0 > HCI Event: Inquiry Complete (0x01) plen 1 Status: Success (0x00) > HCI Event: Command Complete (0x0e) plen 4 Inquiry Cancel (0x01|0x0002) ncmd 1 Status: Command Disallowed (0x0c) Signed-off-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Bluetooth: Add hook for driver to prevent wake from suspendAbhishek Pandit-Subedi1-2/+4
Let drivers have a hook to disable configuring scanning during suspend. Drivers should use the device_may_wakeup function call to determine whether hci should be configured for wakeup. For example, an implementation for btusb may look like the following: bool btusb_prevent_wake(struct hci_dev *hdev) { struct btusb_data *data = hci_get_drvdata(hdev); return !device_may_wakeup(&data->udev->dev); } Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Bluetooth: Rename BT_SUSPEND_COMPLETEAbhishek Pandit-Subedi2-2/+2
Renamed BT_SUSPEND_COMPLETE to BT_SUSPEND_CONFIGURE_WAKE since it sets up the event filter and whitelist for wake-up. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Bluetooth: Modify LE window and interval for suspendAbhishek Pandit-Subedi1-1/+1
When a device is suspended, it doesn't need to be as responsive to connection events. Increase the interval to 640ms (creating a duty cycle of roughly 1.75%) so that passive scanning uses much less power (vs previous duty cycle of 18.75%). The new window + interval combination has been tested to work with HID devices (which are currently the only devices capable of wake up). Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Bluetooth: Fix incorrect type for window and intervalAbhishek Pandit-Subedi1-1/+1
The types for window and interval should be uint16, not uint8. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-11Bluetooth: Introduce debug feature when dynamic debug is disabledMarcel Holtmann3-0/+127
In case dynamic debug is disabled, this feature allows a vendor platform to provide debug statement printing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-05-11Bluetooth: Add support for experimental features configurationMarcel Holtmann1-0/+58
To enable platform specific experimental features, introduce this new set of management commands and events. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-05-11Bluetooth: Replace BT_DBG with bt_dev_dbg for security manager supportMarcel Holtmann1-4/+4
The security manager operates on a specific controller and thus use bt_dev_dbg to indetify the controller for each debug message. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-05-11Bluetooth: Introduce HCI_MGMT_HDEV_OPTIONAL optionMarcel Holtmann1-5/+7
When setting HCI_MGMT_HDEV_OPTIONAL it is possible to target a specific conntroller or a global interface. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-05-11Bluetooth: Replace BT_DBG with bt_dev_dbg for management supportMarcel Holtmann1-111/+110
The majority of management interaction are based on a controller index and have a hci_dev associated with it. So use bt_dev_dbg to have a clean way of indentifying the controller the debug message belongs to. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-05-11Bluetooth: Add MGMT_EV_PHY_CONFIGURATION_CHANGED to supported listMarcel Holtmann1-0/+1
The event MGMT_EV_PHY_CONFIGURATION_CHANGED wasn't listed in the list of supported events. So add it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-05-11Bluetooth: L2CAP: Fix errors during L2CAP_CREDIT_BASED_CONNECTION_REQ (0x17)Konstantin Forostyan1-2/+2
Fix 2 typos in L2CAP_CREDIT_BASED_CONNECTION_REQ (0x17) handling function, that cause BlueZ answer with L2CAP_CR_LE_INVALID_PARAMS or L2CAP_CR_LE_INVALID_SCID error on a correct ECRED connection request. Enchanced Credit Based Mode support was recently introduced with the commit 15f02b91056253e8cdc592888f431da0731337b8 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode"). Signed-off-by: Konstantin Forostyan <konstantin.forostyan@peiker-cee.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-11Bluetooth: Fix advertising handle is set to 0Tedd Ho-Jeong An1-3/+3
This patch fix the advertising handle is set to 0 regardless of actual instance value. The affected commands are LE Set Advertising Set Random Address, LE Set Extended Advertising Data, and LE Set Extended Scan Response Data commands. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-08Bluetooth: use crypto_shash_tfm_digest()Eric Biggers1-5/+1
Instead of manually allocating a 'struct shash_desc' on the stack and calling crypto_shash_digest(), switch to using the new helper function crypto_shash_tfm_digest() which does this for us. Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-04net: partially revert dynamic lockdep key changesCong Wang1-0/+8
This patch reverts the folowing commits: commit 064ff66e2bef84f1153087612032b5b9eab005bd "bonding: add missing netdev_update_lockdep_key()" commit 53d374979ef147ab51f5d632dfe20b14aebeccd0 "net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()" commit 1f26c0d3d24125992ab0026b0dab16c08df947c7 "net: fix kernel-doc warning in <linux/netdevice.h>" commit ab92d68fc22f9afab480153bd82a20f6e2533769 "net: core: add generic lockdep keys" but keeps the addr_list_lock_key because we still lock addr_list_lock nestedly on stack devices, unlikely xmit_lock this is safe because we don't take addr_list_lock on any fast path. Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-28Bluetooth: allow scatternet connections if supported.Alain Michaud1-1/+3
This change allows scatternet connections to be created if the controller reports support and the HCI_QUIRK_VALID_LE_STATES indicates that the reported LE states can be trusted. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-16Bluetooth: Enhanced Connection Complete event belongs to LL PrivacyMarcel Holtmann1-8/+0
The Enhanced Connection Complete event is use in conjunction with LL Privacy and not Extended Advertising. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-15Bluetooth: Enable LE Enhanced Connection Complete event.Marcel Holtmann1-0/+8
In case LL Privacy is supported by the controller, it is also a good idea to use the LE Enhanced Connection Complete event for getting all information about the new connection and its addresses. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-15Bluetooth: Use extra variable to make code more readableMarcel Holtmann1-1/+3
When starting active scanning for discovery the whitelist is not needed to be used. So the filter_policy is 0x00. To make the core more readable use a variable name instead of just setting 0 as paramter. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-09Bluetooth: log advertisement packet length if it gets correctedDaniels Umanovskis1-1/+2
The error could indicate a problem with the Bluetooth device. It is easier to investigate if the packet's actual length gets logged, not just the fact that a discrepancy occurred. Signed-off-by: Daniels Umanovskis <du@axentia.se> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-08Bluetooth: Always request for user confirmation for Just Works (LE SC)Sonny Sasaka1-1/+4
To improve security, always give the user-space daemon a chance to accept or reject a Just Works pairing (LE). The daemon may decide to auto-accept based on the user's intent. This patch is similar to the previous patch but applies for LE Secure Connections (SC). Signed-off-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-07Bluetooth: Simplify / fix return values from tk_requestGuenter Roeck1-5/+4
Some static checker run by 0day reports a variableScope warning. net/bluetooth/smp.c:870:6: warning: The scope of the variable 'err' can be reduced. [variableScope] There is no need for two separate variables holding return values. Stick with the existing variable. While at it, don't pre-initialize 'ret' because it is set in each code path. tk_request() is supposed to return a negative error code on errors, not a bluetooth return code. The calling code converts the return value to SMP_UNSPECIFIED if needed. Fixes: 92516cd97fd4 ("Bluetooth: Always request for user confirmation for Just Works") Cc: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-07Bluetooth: debugfs option to unset MITM flagArchie Pusaka2-5/+56
The BT qualification test SM/MAS/PKE/BV-01-C needs us to turn off the MITM flag when pairing, and at the same time also set the io capability to something other than no input no output. Currently the MITM flag is only unset when the io capability is set to no input no output, therefore the test cannot be executed. This patch introduces a debugfs option to force MITM flag to be turned off. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-05Bluetooth: Increment management interface revisionMarcel Holtmann1-1/+1
Increment the mgmt revision due to the recently added new commands. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-05Bluetooth: Add support for reading security informationMarcel Holtmann1-0/+53
To allow userspace to make correcty security policy decision, the kernel needs to export a few details of the supported security features and encryption key size information. This command exports this information and also allows future extensions if needed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-05Bluetooth: Add support for Read Local Simple Pairing OptionsMarcel Holtmann2-0/+25
With the Read Local Simple Pairing Options command it is possible to retrieve the support for max encryption key size supported by the controller and also if the controller correctly verifies the ECDH public key during pairing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-05Bluetooth: Add framework for Microsoft vendor extensionMiao-chen Chou6-0/+177
Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-05Bluetooth: Move debugfs configuration above the selftestsMarcel Holtmann1-8/+8
This is just a cosmetic clean to move the selftests configuration option to the bottom of the list of options. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-05Bluetooth: add support to notify using SCO air modeSathish Narsimman2-5/+43
notifying using HCI_NOTIFY_CONN_ADD for SCO connection is generic in case of mSBC audio. To differntiate SCO air mode introducing HCI_NOTIFY_ENABLE_SCO_CVSD and HCI_NOTIFY_ENABLE_SCO_TRANSP. Signed-off-by: Sathish Narsimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03Bluetooth: fixing minor typo in commentAlain Michaud1-1/+1
This changes a simple typo in hci_event.c Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-03Bluetooth: Prioritize SCO trafficAbhishek Pandit-Subedi1-49/+57
When scheduling TX packets, send all SCO/eSCO packets first, check for pending SCO/eSCO packets after every ACL/LE packet and send them if any are pending. This is done to make sure that we can meet SCO deadlines on slow interfaces like UART. If we were to queue up multiple ACL packets without checking for a SCO packet, we might miss the SCO timing. For example: The time it takes to send a maximum size ACL packet (1024 bytes): t = 10/8 * 1024 bytes * 8 bits/byte * 1 packet / baudrate where 10/8 is uart overhead due to start/stop bits per byte Replace t = 3.75ms (SCO deadline), which gives us a baudrate of 2730666. At a baudrate of 3000000, if we didn't check for SCO packets within 1024 bytes, we would miss the 3.75ms timing window. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-02Bluetooth: Always request for user confirmation for Just WorksSonny Sasaka1-2/+10
To improve security, always give the user-space daemon a chance to accept or reject a Just Works pairing (LE). The daemon may decide to auto-accept based on the user's intent. Signed-off-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-02Bluetooth: Add BT_MODE socket optionLuiz Augusto von Dentz1-1/+112
This adds BT_MODE socket option which can be used to set L2CAP modes, including modes only supported over LE which were not supported using the L2CAP_OPTIONS. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-02Bluetooth: L2CAP: Fix handling LE modes by L2CAP_OPTIONSLuiz Augusto von Dentz1-4/+21
L2CAP_OPTIONS shall only be used with BR/EDR modes. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-26Bluetooth: L2CAP: Use DEFER_SETUP to group ECRED connectionsLuiz Augusto von Dentz1-10/+127
This uses the DEFER_SETUP flag to group channels with L2CAP_CREDIT_BASED_CONNECTION_REQ. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-25Bluetooth: don't assume key size is 16 when the command failsAlain Michaud1-4/+4
With this change, the encryption key size is not assumed to be 16 if the read_encryption_key_size command fails for any reason. This ensures that if the controller fails the command for any reason that the encryption key size isn't implicitely set to 16 and instead take a more concervative posture to assume it is 0. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-24Bluetooth: L2CAP: Add get_peer_pid callbackLuiz Augusto von Dentz1-0/+8
This adds a callback to read the socket pid. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-23Bluetooth: Fix incorrect branch in connection completeAbhishek Pandit-Subedi1-8/+9
When handling auto-connected devices, we should execute the rest of the connection complete when it was previously discovered and it is an ACL connection. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-23Bluetooth: Restore running state if suspend failsAbhishek Pandit-Subedi1-19/+20
If Bluetooth fails to enter the suspended state correctly, restore the state to running (re-enabling scans). PM_POST_SUSPEND is only sent to notifiers that successfully return from PM_PREPARE_SUSPEND notification so we should recover gracefully if it fails. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-18Bluetooth: Do not cancel advertising when starting a scanDmitry Grinberg1-17/+0
BlueZ cancels adv when starting a scan, but does not cancel a scan when starting to adv. Neither is required, so this brings both to a consistent state (of not affecting each other). Some very rare (I've never seen one) BT 4.0 chips will fail to do both at once. Even this is ok since the command that will fail will be the second one, and thus the common sense logic of first-come-first-served is preserved for BLE requests. Signed-off-by: Dmitry Grinberg <dmitrygr@google.com> Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-14Bluetooth: L2CAP: remove set but not used variable 'credits'YueHaibing1-2/+1
net/bluetooth/l2cap_core.c: In function l2cap_ecred_conn_req: net/bluetooth/l2cap_core.c:5848:6: warning: variable credits set but not used [-Wunused-but-set-variable] commit 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") involved this unused variable, remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-12Bluetooth: L2CAP: Fix a condition in l2cap_sock_recvmsg()Dan Carpenter1-1/+1
Smatch complains about the indenting: net/bluetooth/l2cap_sock.c:1027 l2cap_sock_recvmsg() warn: inconsistent indenting It looks like this is supposed to be an "else if" condition. Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 07:01:20 +0300