summaryrefslogtreecommitdiff
path: root/net/bluetooth
AgeCommit message (Collapse)AuthorFilesLines
2020-01-26Bluetooth: Fix race condition in hci_release_sock()Dan Carpenter1-0/+3
Syzbot managed to trigger a use after free "KASAN: use-after-free Write in hci_sock_bind". I have reviewed the code manually and one possibly cause I have found is that we are not holding lock_sock(sk) when we do the hci_dev_put(hdev) in hci_sock_release(). My theory is that the bind and the release are racing against each other which results in this use after free. Reported-by: syzbot+eba992608adf3d796bcc@syzkaller.appspotmail.com Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-01-25Bluetooth: Move {min,max}_key_size debugfs into hci_debugfs_create_leMarcel Holtmann2-93/+61
The debugfs entries for {min,max}_key_size are created during SMP registration and thus it might lead to multiple attempts to create the same entries. Avoid this by moving them to the LE controller init section. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-01-25Bluetooth: Add missing checks for HCI_ISODATA_PKT packet typeMarcel Holtmann2-5/+11
The checks for HCI_ISODATA_PKT packet type are required in a few additional locations to allow sending/receiving of this new packet type. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-01-22Bluetooth: fix appearance typo in mgmt.cAlain Michaud1-4/+4
This change addresses a typo in the set_appearance handler. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-01-22Bluetooth: adding missing const decoration to mgmt_status_tableAlain Michaud1-1/+1
This change simply adds a missing const decoration to the mtmt_status_table definition. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-01-16Bluetooth: Increment management interface revisionMarcel Holtmann1-1/+1
Increment the mgmt revision due to the recently added commands. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-01-16Bluetooth: Make use of __check_timeout on hci_sched_leLuiz Augusto von Dentz1-8/+3
This reuse __check_timeout on hci_sched_le following the same logic used hci_sched_acl. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-01-16Bluetooth: monitor: Add support for ISO packetsLuiz Augusto von Dentz1-0/+6
This enables passing ISO packets to the monitor socket. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-01-16Bluetooth: Implementation of MGMT_OP_SET_BLOCKED_KEYS.Alain Michaud4-8/+188
MGMT command is added to receive the list of blocked keys from user-space. The list is used to: 1) Block keys from being distributed by the device during the ke distribution phase of SMP. 2) Filter out any keys that were previously saved so they are no longer used. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-01-08Bluetooth: remove redundant assignment to variable icidColin Ian King1-1/+0
Variable icid is being rc is assigned with a value that is never read. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-01-04Bluetooth: Auto tune if input MTU is set to 0Luiz Augusto von Dentz1-2/+52
This enables the code to set the input MTU using the underline link packet types when set to 0, previously this would likely be rejected by the remote peer since it would be bellow the minimal of 48 for BR/EDR or 23 for LE, that way it shall be safe to use 0 without causing any side effects. This is convenient for the likes of A2DP transport, see: https://habr.com/en/post/456182/ Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-01-04Bluetooth: Add support for LE PHY Update Complete eventLuiz Augusto von Dentz1-0/+27
This handles LE PHY Update Complete event and store both tx_phy and rx_phy into hci_conn. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-01-04Bluetooth: Remove usage of BT_ERR_RATELIMITED macroMarcel Holtmann1-8/+6
The macro is really not needed and can be replaced with either usage of bt_err_ratelimited or bt_dev_err_ratelimited. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-01-04Bluetooth: Adding a bt_dev_warn_ratelimited macro.Alain Michaud1-0/+16
The macro will be used to display rate limited warning messages in the log. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-12-13netdev: pass the stuck queue to the timeout handlerMichael S. Tsirkin1-1/+1
This allows incrementing the correct timeout statistic without any mess. Down the road, devices can learn to reset just the specific queue. The patch was generated with the following script: use strict; use warnings; our $^I = '.bak'; my @work = ( ["arch/m68k/emu/nfeth.c", "nfeth_tx_timeout"], ["arch/um/drivers/net_kern.c", "uml_net_tx_timeout"], ["arch/um/drivers/vector_kern.c", "vector_net_tx_timeout"], ["arch/xtensa/platforms/iss/network.c", "iss_net_tx_timeout"], ["drivers/char/pcmcia/synclink_cs.c", "hdlcdev_tx_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/message/fusion/mptlan.c", "mpt_lan_tx_timeout"], ["drivers/misc/sgi-xp/xpnet.c", "xpnet_dev_tx_timeout"], ["drivers/net/appletalk/cops.c", "cops_timeout"], ["drivers/net/arcnet/arcdevice.h", "arcnet_timeout"], ["drivers/net/arcnet/arcnet.c", "arcnet_timeout"], ["drivers/net/arcnet/com20020.c", "arcnet_timeout"], ["drivers/net/ethernet/3com/3c509.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c515.c", "corkscrew_timeout"], ["drivers/net/ethernet/3com/3c574_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c589_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/typhoon.c", "typhoon_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "eip_tx_timeout"], ["drivers/net/ethernet/8390/8390.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390p.c", "eip_tx_timeout"], ["drivers/net/ethernet/8390/ax88796.c", "ax_ei_tx_timeout"], ["drivers/net/ethernet/8390/axnet_cs.c", "axnet_tx_timeout"], ["drivers/net/ethernet/8390/etherh.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/hydra.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mac8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mcf8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/lib8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/ne2k-pci.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/pcnet_cs.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/smc-ultra.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/wd.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/zorro8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/adaptec/starfire.c", "tx_timeout"], ["drivers/net/ethernet/agere/et131x.c", "et131x_tx_timeout"], ["drivers/net/ethernet/allwinner/sun4i-emac.c", "emac_timeout"], ["drivers/net/ethernet/alteon/acenic.c", "ace_watchdog"], ["drivers/net/ethernet/amazon/ena/ena_netdev.c", "ena_tx_timeout"], ["drivers/net/ethernet/amd/7990.h", "lance_tx_timeout"], ["drivers/net/ethernet/amd/7990.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/a2065.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/am79c961a.c", "am79c961_timeout"], ["drivers/net/ethernet/amd/amd8111e.c", "amd8111e_tx_timeout"], ["drivers/net/ethernet/amd/ariadne.c", "ariadne_tx_timeout"], ["drivers/net/ethernet/amd/atarilance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/au1000_eth.c", "au1000_tx_timeout"], ["drivers/net/ethernet/amd/declance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/lance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/mvme147.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/ni65.c", "ni65_timeout"], ["drivers/net/ethernet/amd/nmclan_cs.c", "mace_tx_timeout"], ["drivers/net/ethernet/amd/pcnet32.c", "pcnet32_tx_timeout"], ["drivers/net/ethernet/amd/sunlance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/xgbe/xgbe-drv.c", "xgbe_tx_timeout"], ["drivers/net/ethernet/apm/xgene-v2/main.c", "xge_timeout"], ["drivers/net/ethernet/apm/xgene/xgene_enet_main.c", "xgene_enet_timeout"], ["drivers/net/ethernet/apple/macmace.c", "mace_tx_timeout"], ["drivers/net/ethernet/atheros/ag71xx.c", "ag71xx_tx_timeout"], ["drivers/net/ethernet/atheros/alx/main.c", "alx_tx_timeout"], ["drivers/net/ethernet/atheros/atl1c/atl1c_main.c", "atl1c_tx_timeout"], ["drivers/net/ethernet/atheros/atl1e/atl1e_main.c", "atl1e_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl1.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl2.c", "atl2_tx_timeout"], ["drivers/net/ethernet/broadcom/b44.c", "b44_tx_timeout"], ["drivers/net/ethernet/broadcom/bcmsysport.c", "bcm_sysport_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2.c", "bnx2_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnxt/bnxt.c", "bnxt_tx_timeout"], ["drivers/net/ethernet/broadcom/genet/bcmgenet.c", "bcmgenet_timeout"], ["drivers/net/ethernet/broadcom/sb1250-mac.c", "sbmac_tx_timeout"], ["drivers/net/ethernet/broadcom/tg3.c", "tg3_tx_timeout"], ["drivers/net/ethernet/calxeda/xgmac.c", "xgmac_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c", "lio_vf_rep_tx_timeout"], ["drivers/net/ethernet/cavium/thunder/nicvf_main.c", "nicvf_tx_timeout"], ["drivers/net/ethernet/cirrus/cs89x0.c", "net_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cortina/gemini.c", "gmac_tx_timeout"], ["drivers/net/ethernet/davicom/dm9000.c", "dm9000_timeout"], ["drivers/net/ethernet/dec/tulip/de2104x.c", "de_tx_timeout"], ["drivers/net/ethernet/dec/tulip/tulip_core.c", "tulip_tx_timeout"], ["drivers/net/ethernet/dec/tulip/winbond-840.c", "tx_timeout"], ["drivers/net/ethernet/dlink/dl2k.c", "rio_tx_timeout"], ["drivers/net/ethernet/dlink/sundance.c", "tx_timeout"], ["drivers/net/ethernet/emulex/benet/be_main.c", "be_tx_timeout"], ["drivers/net/ethernet/ethoc.c", "ethoc_tx_timeout"], ["drivers/net/ethernet/faraday/ftgmac100.c", "ftgmac100_tx_timeout"], ["drivers/net/ethernet/fealnx.c", "fealnx_tx_timeout"], ["drivers/net/ethernet/freescale/dpaa/dpaa_eth.c", "dpaa_tx_timeout"], ["drivers/net/ethernet/freescale/fec_main.c", "fec_timeout"], ["drivers/net/ethernet/freescale/fec_mpc52xx.c", "mpc52xx_fec_tx_timeout"], ["drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c", "fs_timeout"], ["drivers/net/ethernet/freescale/gianfar.c", "gfar_timeout"], ["drivers/net/ethernet/freescale/ucc_geth.c", "ucc_geth_timeout"], ["drivers/net/ethernet/fujitsu/fmvj18x_cs.c", "fjn_tx_timeout"], ["drivers/net/ethernet/google/gve/gve_main.c", "gve_tx_timeout"], ["drivers/net/ethernet/hisilicon/hip04_eth.c", "hip04_timeout"], ["drivers/net/ethernet/hisilicon/hix5hd2_gmac.c", "hix5hd2_net_timeout"], ["drivers/net/ethernet/hisilicon/hns/hns_enet.c", "hns_nic_net_timeout"], ["drivers/net/ethernet/hisilicon/hns3/hns3_enet.c", "hns3_nic_net_timeout"], ["drivers/net/ethernet/huawei/hinic/hinic_main.c", "hinic_tx_timeout"], ["drivers/net/ethernet/i825xx/82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/ether1.c", "ether1_timeout"], ["drivers/net/ethernet/i825xx/lib82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/sun3_82586.c", "sun3_82586_timeout"], ["drivers/net/ethernet/ibm/ehea/ehea_main.c", "ehea_tx_watchdog"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/ibmvnic.c", "ibmvnic_tx_timeout"], ["drivers/net/ethernet/intel/e100.c", "e100_tx_timeout"], ["drivers/net/ethernet/intel/e1000/e1000_main.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/e1000e/netdev.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/fm10k/fm10k_netdev.c", "fm10k_tx_timeout"], ["drivers/net/ethernet/intel/i40e/i40e_main.c", "i40e_tx_timeout"], ["drivers/net/ethernet/intel/iavf/iavf_main.c", "iavf_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/igb/igb_main.c", "igb_tx_timeout"], ["drivers/net/ethernet/intel/igbvf/netdev.c", "igbvf_tx_timeout"], ["drivers/net/ethernet/intel/ixgb/ixgb_main.c", "ixgb_tx_timeout"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c", "adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_main.c", "ixgbe_tx_timeout"], ["drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c", "ixgbevf_tx_timeout"], ["drivers/net/ethernet/jme.c", "jme_tx_timeout"], ["drivers/net/ethernet/korina.c", "korina_tx_timeout"], ["drivers/net/ethernet/lantiq_etop.c", "ltq_etop_tx_timeout"], ["drivers/net/ethernet/marvell/mv643xx_eth.c", "mv643xx_eth_tx_timeout"], ["drivers/net/ethernet/marvell/pxa168_eth.c", "pxa168_eth_tx_timeout"], ["drivers/net/ethernet/marvell/skge.c", "skge_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/mediatek/mtk_eth_soc.c", "mtk_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c", "mlx5e_tx_timeout"], ["drivers/net/ethernet/micrel/ks8842.c", "ks8842_tx_timeout"], ["drivers/net/ethernet/micrel/ksz884x.c", "netdev_tx_timeout"], ["drivers/net/ethernet/microchip/enc28j60.c", "enc28j60_tx_timeout"], ["drivers/net/ethernet/microchip/encx24j600.c", "encx24j600_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.h", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/jazzsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/macsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/natsemi.c", "ns_tx_timeout"], ["drivers/net/ethernet/natsemi/ns83820.c", "ns83820_tx_timeout"], ["drivers/net/ethernet/natsemi/xtsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/neterion/s2io.h", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/s2io.c", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/vxge/vxge-main.c", "vxge_tx_watchdog"], ["drivers/net/ethernet/netronome/nfp/nfp_net_common.c", "nfp_net_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c", "pch_gbe_tx_timeout"], ["drivers/net/ethernet/packetengines/hamachi.c", "hamachi_tx_timeout"], ["drivers/net/ethernet/packetengines/yellowfin.c", "yellowfin_tx_timeout"], ["drivers/net/ethernet/pensando/ionic/ionic_lif.c", "ionic_tx_timeout"], ["drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c", "netxen_tx_timeout"], ["drivers/net/ethernet/qlogic/qla3xxx.c", "ql3xxx_tx_timeout"], ["drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c", "qlcnic_tx_timeout"], ["drivers/net/ethernet/qualcomm/emac/emac.c", "emac_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_spi.c", "qcaspi_netdev_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_uart.c", "qcauart_netdev_tx_timeout"], ["drivers/net/ethernet/rdc/r6040.c", "r6040_tx_timeout"], ["drivers/net/ethernet/realtek/8139cp.c", "cp_tx_timeout"], ["drivers/net/ethernet/realtek/8139too.c", "rtl8139_tx_timeout"], ["drivers/net/ethernet/realtek/atp.c", "tx_timeout"], ["drivers/net/ethernet/realtek/r8169_main.c", "rtl8169_tx_timeout"], ["drivers/net/ethernet/renesas/ravb_main.c", "ravb_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c", "sxgbe_tx_timeout"], ["drivers/net/ethernet/seeq/ether3.c", "ether3_timeout"], ["drivers/net/ethernet/seeq/sgiseeq.c", "timeout"], ["drivers/net/ethernet/sfc/efx.c", "efx_watchdog"], ["drivers/net/ethernet/sfc/falcon/efx.c", "ef4_watchdog"], ["drivers/net/ethernet/sgi/ioc3-eth.c", "ioc3_timeout"], ["drivers/net/ethernet/sgi/meth.c", "meth_tx_timeout"], ["drivers/net/ethernet/silan/sc92031.c", "sc92031_tx_timeout"], ["drivers/net/ethernet/sis/sis190.c", "sis190_tx_timeout"], ["drivers/net/ethernet/sis/sis900.c", "sis900_tx_timeout"], ["drivers/net/ethernet/smsc/epic100.c", "epic_tx_timeout"], ["drivers/net/ethernet/smsc/smc911x.c", "smc911x_timeout"], ["drivers/net/ethernet/smsc/smc9194.c", "smc_timeout"], ["drivers/net/ethernet/smsc/smc91c92_cs.c", "smc_tx_timeout"], ["drivers/net/ethernet/smsc/smc91x.c", "smc_timeout"], ["drivers/net/ethernet/stmicro/stmmac/stmmac_main.c", "stmmac_tx_timeout"], ["drivers/net/ethernet/sun/cassini.c", "cas_tx_timeout"], ["drivers/net/ethernet/sun/ldmvsw.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/niu.c", "niu_tx_timeout"], ["drivers/net/ethernet/sun/sunbmac.c", "bigmac_tx_timeout"], ["drivers/net/ethernet/sun/sungem.c", "gem_tx_timeout"], ["drivers/net/ethernet/sun/sunhme.c", "happy_meal_tx_timeout"], ["drivers/net/ethernet/sun/sunqe.c", "qe_tx_timeout"], ["drivers/net/ethernet/sun/sunvnet.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.h", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/synopsys/dwc-xlgmac-net.c", "xlgmac_tx_timeout"], ["drivers/net/ethernet/ti/cpmac.c", "cpmac_tx_timeout"], ["drivers/net/ethernet/ti/cpsw.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.h", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/davinci_emac.c", "emac_dev_tx_timeout"], ["drivers/net/ethernet/ti/netcp_core.c", "netcp_ndo_tx_timeout"], ["drivers/net/ethernet/ti/tlan.c", "tlan_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.h", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_wireless.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/spider_net.c", "spider_net_tx_timeout"], ["drivers/net/ethernet/toshiba/tc35815.c", "tc35815_tx_timeout"], ["drivers/net/ethernet/via/via-rhine.c", "rhine_tx_timeout"], ["drivers/net/ethernet/wiznet/w5100.c", "w5100_tx_timeout"], ["drivers/net/ethernet/wiznet/w5300.c", "w5300_tx_timeout"], ["drivers/net/ethernet/xilinx/xilinx_emaclite.c", "xemaclite_tx_timeout"], ["drivers/net/ethernet/xircom/xirc2ps_cs.c", "xirc_tx_timeout"], ["drivers/net/fjes/fjes_main.c", "fjes_tx_retry"], ["drivers/net/slip/slip.c", "sl_tx_timeout"], ["include/linux/usb/usbnet.h", "usbnet_tx_timeout"], ["drivers/net/usb/aqc111.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88172a.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88179_178a.c", "usbnet_tx_timeout"], ["drivers/net/usb/catc.c", "catc_tx_timeout"], ["drivers/net/usb/cdc_mbim.c", "usbnet_tx_timeout"], ["drivers/net/usb/cdc_ncm.c", "usbnet_tx_timeout"], ["drivers/net/usb/dm9601.c", "usbnet_tx_timeout"], ["drivers/net/usb/hso.c", "hso_net_tx_timeout"], ["drivers/net/usb/int51x1.c", "usbnet_tx_timeout"], ["drivers/net/usb/ipheth.c", "ipheth_tx_timeout"], ["drivers/net/usb/kaweth.c", "kaweth_tx_timeout"], ["drivers/net/usb/lan78xx.c", "lan78xx_tx_timeout"], ["drivers/net/usb/mcs7830.c", "usbnet_tx_timeout"], ["drivers/net/usb/pegasus.c", "pegasus_tx_timeout"], ["drivers/net/usb/qmi_wwan.c", "usbnet_tx_timeout"], ["drivers/net/usb/r8152.c", "rtl8152_tx_timeout"], ["drivers/net/usb/rndis_host.c", "usbnet_tx_timeout"], ["drivers/net/usb/rtl8150.c", "rtl8150_tx_timeout"], ["drivers/net/usb/sierra_net.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc75xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc95xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9700.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9800.c", "usbnet_tx_timeout"], ["drivers/net/usb/usbnet.c", "usbnet_tx_timeout"], ["drivers/net/vmxnet3/vmxnet3_drv.c", "vmxnet3_tx_timeout"], ["drivers/net/wan/cosa.c", "cosa_net_timeout"], ["drivers/net/wan/farsync.c", "fst_tx_timeout"], ["drivers/net/wan/fsl_ucc_hdlc.c", "uhdlc_tx_timeout"], ["drivers/net/wan/lmc/lmc_main.c", "lmc_driver_timeout"], ["drivers/net/wan/x25_asy.c", "x25_asy_timeout"], ["drivers/net/wimax/i2400m/netdev.c", "i2400m_tx_timeout"], ["drivers/net/wireless/intel/ipw2x00/ipw2100.c", "ipw2100_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/main.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco_usb.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco.h", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_dev.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.h", "islpci_eth_tx_timeout"], ["drivers/net/wireless/marvell/mwifiex/main.c", "mwifiex_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.c", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.h", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/rndis_wlan.c", "usbnet_tx_timeout"], ["drivers/net/wireless/wl3501_cs.c", "wl3501_tx_timeout"], ["drivers/net/wireless/zydas/zd1201.c", "zd1201_tx_timeout"], ["drivers/s390/net/qeth_core.h", "qeth_tx_timeout"], ["drivers/s390/net/qeth_core_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/staging/ks7010/ks_wlan_net.c", "ks_wlan_tx_timeout"], ["drivers/staging/qlge/qlge_main.c", "qlge_tx_timeout"], ["drivers/staging/rtl8192e/rtl8192e/rtl_core.c", "_rtl92e_tx_timeout"], ["drivers/staging/rtl8192u/r8192U_core.c", "tx_timeout"], ["drivers/staging/unisys/visornic/visornic_main.c", "visornic_xmit_timeout"], ["drivers/staging/wlan-ng/p80211netdev.c", "p80211knetdev_tx_timeout"], ["drivers/tty/n_gsm.c", "gsm_mux_net_tx_timeout"], ["drivers/tty/synclink.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclink_gt.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclinkmp.c", "hdlcdev_tx_timeout"], ["net/atm/lec.c", "lec_tx_timeout"], ["net/bluetooth/bnep/netdev.c", "bnep_net_timeout"] ); for my $p (@work) { my @pair = @$p; my $file = $pair[0]; my $func = $pair[1]; print STDERR $file , ": ", $func,"\n"; our @ARGV = ($file); while (<ARGV>) { if (m/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/) { print STDERR "found $1+$2 in $file\n"; } if (s/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/$1, unsigned int txqueue$2/) { print STDERR "$func found in $file\n"; } print; } } where the list of files and functions is simply from: git grep ndo_tx_timeout, with manual addition of headers in the rare cases where the function is from a header, then manually changing the few places which actually call ndo_tx_timeout. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Martin Habets <mhabets@solarflare.com> changes from v9: fixup a forward declaration changes from v9: more leftovers from v3 change changes from v8: fix up a missing direct call to timeout rebased on net-next changes from v7: fixup leftovers from v3 change changes from v6: fix typo in rtl driver changes from v5: add missing files (allow any net device argument name) changes from v4: add a missing driver header changes from v3: change queue # to unsigned Changes from v2: added headers Changes from v1: Fix errors found by kbuild: generalize the pattern a bit, to pick up a couple of instances missed by the previous version. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-02Merge tag 'compat-ioctl-5.5' of ↵Linus Torvalds2-3/+32
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...
2019-11-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds6-22/+62
Pull networking updates from David Miller: "Another merge window, another pull full of stuff: 1) Support alternative names for network devices, from Jiri Pirko. 2) Introduce per-netns netdev notifiers, also from Jiri Pirko. 3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara Larsen. 4) Allow compiling out the TLS TOE code, from Jakub Kicinski. 5) Add several new tracepoints to the kTLS code, also from Jakub. 6) Support set channels ethtool callback in ena driver, from Sameeh Jubran. 7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED, SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long. 8) Add XDP support to mvneta driver, from Lorenzo Bianconi. 9) Lots of netfilter hw offload fixes, cleanups and enhancements, from Pablo Neira Ayuso. 10) PTP support for aquantia chips, from Egor Pomozov. 11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From Josh Hunt. 12) Add smart nagle to tipc, from Jon Maloy. 13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat Duvvuru. 14) Add a flow mask cache to OVS, from Tonghao Zhang. 15) Add XDP support to ice driver, from Maciej Fijalkowski. 16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak. 17) Support UDP GSO offload in atlantic driver, from Igor Russkikh. 18) Support it in stmmac driver too, from Jose Abreu. 19) Support TIPC encryption and auth, from Tuong Lien. 20) Introduce BPF trampolines, from Alexei Starovoitov. 21) Make page_pool API more numa friendly, from Saeed Mahameed. 22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni. 23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits) libbpf: Fix usage of u32 in userspace code mm: Implement no-MMU variant of vmalloc_user_node_flags slip: Fix use-after-free Read in slip_open net: dsa: sja1105: fix sja1105_parse_rgmii_delays() macvlan: schedule bc_work even if error enetc: add support Credit Based Shaper(CBS) for hardware offload net: phy: add helpers phy_(un)lock_mdio_bus mdio_bus: don't use managed reset-controller ax88179_178a: add ethtool_op_get_ts_info() mlxsw: spectrum_router: Fix use of uninitialized adjacency index mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels bpf: Simplify __bpf_arch_text_poke poke type handling bpf: Introduce BPF_TRACE_x helper for the tracing tests bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT bpf, testing: Add various tail call test cases bpf, x86: Emit patchable direct jump as tail call bpf: Constant map key tracking for prog array pokes bpf: Add poke dependency tracking for prog array maps bpf: Add initial poke descriptor table for jit images bpf: Move owner type, jited info into array auxiliary data ...
2019-11-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-1/+1
Pull crypto updates from Herbert Xu: "API: - Add library interfaces of certain crypto algorithms for WireGuard - Remove the obsolete ablkcipher and blkcipher interfaces - Move add_early_randomness() out of rng_mutex Algorithms: - Add blake2b shash algorithm - Add blake2s shash algorithm - Add curve25519 kpp algorithm - Implement 4 way interleave in arm64/gcm-ce - Implement ciphertext stealing in powerpc/spe-xts - Add Eric Biggers's scalar accelerated ChaCha code for ARM - Add accelerated 32r2 code from Zinc for MIPS - Add OpenSSL/CRYPTOGRAMS poly1305 implementation for ARM and MIPS Drivers: - Fix entropy reading failures in ks-sa - Add support for sam9x60 in atmel - Add crypto accelerator for amlogic GXL - Add sun8i-ce Crypto Engine - Add sun8i-ss cryptographic offloader - Add a host of algorithms to inside-secure - Add NPCM RNG driver - add HiSilicon HPRE accelerator - Add HiSilicon TRNG driver" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (285 commits) crypto: vmx - Avoid weird build failures crypto: lib/chacha20poly1305 - use chacha20_crypt() crypto: x86/chacha - only unregister algorithms if registered crypto: chacha_generic - remove unnecessary setkey() functions crypto: amlogic - enable working on big endian kernel crypto: sun8i-ce - enable working on big endian crypto: mips/chacha - select CRYPTO_SKCIPHER, not CRYPTO_BLKCIPHER hwrng: ks-sa - Enable COMPILE_TEST crypto: essiv - remove redundant null pointer check before kfree crypto: atmel-aes - Change data type for "lastc" buffer crypto: atmel-tdes - Set the IV after {en,de}crypt crypto: sun4i-ss - fix big endian issues crypto: sun4i-ss - hide the Invalid keylen message crypto: sun4i-ss - use crypto_ahash_digestsize crypto: sun4i-ss - remove dependency on not 64BIT crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.c MAINTAINERS: Add maintainer for HiSilicon SEC V2 driver crypto: hisilicon - add DebugFS for HiSilicon SEC Documentation: add DebugFS doc for HiSilicon SEC crypto: hisilicon - add SRIOV for HiSilicon SEC ...
2019-11-22Bluetooth: Fix memory leak in hci_connect_le_scanNavid Emamdoost1-1/+3
In the implementation of hci_connect_le_scan() when conn is added via hci_conn_add(), if hci_explicit_conn_params_set() fails the allocated memory for conn is leaked. Use hci_conn_del() to release it. Fixes: f75113a26008 ("Bluetooth: add hci_connect_le_scan") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-11-22Bluetooth: Allow combination of BDADDR_PROPERTY and INVALID_BDADDR quirksMarcel Holtmann1-2/+24
When utilizing BDADDR_PROPERTY and INVALID_BDADDR quirks together it results in an unconfigured controller even if the bootloader provides a valid address. Fix this by allowing a bootloader provided address to mark the controller as configured. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Tested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2019-11-19Bluetooth: delete a stray unlockDan Carpenter1-3/+1
We used to take a lock in amp_physical_cfm() but then we moved it to the caller function. Unfortunately the unlock on this error path was overlooked so it leads to a double unlock. Fixes: a514b17fab51 ("Bluetooth: Refactor locking in amp_physical_cfm") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-11-13Merge branch 'for-upstream' of ↵David S. Miller1-5/+14
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: linux-bluetooth 2019-11-11 Here's one more bluetooth-next pull request for the 5.5 kernel release. - Several fixes for LE advertising - Added PM support to hci_qca driver - Added support for WCN3991 SoC in hci_qca driver - Added DT bindings for BCM43540 module - A few other small cleanups/fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07net: use helpers to change sk_ack_backlogEric Dumazet1-2/+2
Writers are holding a lock, but many readers do not. Following patch will add appropriate barriers in sk_acceptq_removed() and sk_acceptq_added(). Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-04Bluetooth: Fix advertising duplicated flagsLuiz Augusto von Dentz1-0/+9
Instances may have flags set as part of its data in which case the code should not attempt to add it again otherwise it can cause duplication: < HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 35 Handle: 0x00 Operation: Complete extended advertising data (0x03) Fragment preference: Minimize fragmentation (0x01) Data length: 0x06 Flags: 0x04 BR/EDR Not Supported Flags: 0x06 LE General Discoverable Mode BR/EDR Not Supported Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2019-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-10/+2
The only slightly tricky merge conflict was the netdevsim because the mutex locking fix overlapped a lot of driver reload reorganization. The rest were (relatively) trivial in nature. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01crypto: skcipher - rename the crypto_blkcipher module and kconfig optionEric Biggers1-1/+1
Now that the blkcipher algorithm type has been removed in favor of skcipher, rename the crypto_blkcipher kernel module to crypto_skcipher, and rename the config options accordingly: CONFIG_CRYPTO_BLKCIPHER => CONFIG_CRYPTO_SKCIPHER CONFIG_CRYPTO_BLKCIPHER2 => CONFIG_CRYPTO_SKCIPHER2 Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-10-28net: use skb_queue_empty_lockless() in poll() handlersEric Dumazet1-2/+2
Many poll() handlers are lockless. Using skb_queue_empty_lockless() instead of skb_queue_empty() is more appropriate. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-26Bluetooth: Fix not using LE_ADV_NONCONN_IND for instance 0Luiz Augusto von Dentz1-4/+4
Instance 0 is controlled by stack itself and always set the local name in the scan response. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-10-26Bluetooth: Fix using advertising instance duration as timeoutLuiz Augusto von Dentz1-1/+1
When using LE Set Extended Advertising Enable command the duration refers to the lifetime of instance not the length which is actually controlled by the interval_min and interval_max when setting the parameters. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-10-25net: core: add generic lockdep keysTaehee Yoo1-8/+0
Some interface types could be nested. (VLAN, BONDING, TEAM, MACSEC, MACVLAN, IPVLAN, VIRT_WIFI, VXLAN, etc..) These interface types should set lockdep class because, without lockdep class key, lockdep always warn about unexisting circular locking. In the current code, these interfaces have their own lockdep class keys and these manage itself. So that there are so many duplicate code around the /driver/net and /net/. This patch adds new generic lockdep keys and some helper functions for it. This patch does below changes. a) Add lockdep class keys in struct net_device - qdisc_running, xmit, addr_list, qdisc_busylock - these keys are used as dynamic lockdep key. b) When net_device is being allocated, lockdep keys are registered. - alloc_netdev_mqs() c) When net_device is being free'd llockdep keys are unregistered. - free_netdev() d) Add generic lockdep key helper function - netdev_register_lockdep_key() - netdev_unregister_lockdep_key() - netdev_update_lockdep_key() e) Remove unnecessary generic lockdep macro and functions f) Remove unnecessary lockdep code of each interfaces. After this patch, each interface modules don't need to maintain their lockdep keys. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-23compat_ioctl: move hci_sock handlers into driverArnd Bergmann1-1/+20
All these ioctl commands are compatible, so we can handle them with a trivial wrapper in hci_sock.c and remove the listing in fs/compat_ioctl.c. A few of the commands pass integer arguments instead of pointers, so for correctness skip the compat_ptr() conversion here. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-10-23compat_ioctl: move rfcomm handlers into driverArnd Bergmann1-2/+12
All these ioctl commands are compatible, so we can handle them with a trivial wrapper in rfcomm/sock.c and remove the listing in fs/compat_ioctl.c. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-10-17Bluetooth: hci_core: fix init for HCI_USER_CHANNELMattijs Korpershoek1-1/+8
During the setup() stage, HCI device drivers expect the chip to acknowledge its setup() completion via vendor specific frames. If userspace opens() such HCI device in HCI_USER_CHANNEL [1] mode, the vendor specific frames are never tranmitted to the driver, as they are filtered in hci_rx_work(). Allow HCI devices which operate in HCI_USER_CHANNEL mode to receive frames if the HCI device is is HCI_INIT state. [1] https://www.spinics.net/lists/linux-bluetooth/msg37345.html Fixes: 23500189d7e0 ("Bluetooth: Introduce new HCI socket channel for user operation") Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-10-16Bluetooth: Workaround directed advertising bug in Broadcom controllersSzymon Janc1-0/+8
It appears that some Broadcom controllers (eg BCM20702A0) reject LE Set Advertising Parameters command if advertising intervals provided are not within range for undirected and low duty directed advertising. Workaround this bug by populating min and max intervals with 'valid' values. < HCI Command: LE Set Advertising Parameters (0x08|0x0006) plen 15 Min advertising interval: 0.000 msec (0x0000) Max advertising interval: 0.000 msec (0x0000) Type: Connectable directed - ADV_DIRECT_IND (high duty cycle) (0x01) Own address type: Public (0x00) Direct address type: Random (0x01) Direct address: E2:F0:7B:9F:DC:F4 (Static) Channel map: 37, 38, 39 (0x07) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) > HCI Event: Command Complete (0x0e) plen 4 LE Set Advertising Parameters (0x08|0x0006) ncmd 1 Status: Invalid HCI Command Parameters (0x12) Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Tested-by: Sören Beye <linux@hypfer.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-10-16Bluetooth: missed cpu_to_le16 conversion in hci_init4_reqBen Dooks (Codethink)1-2/+2
It looks like in hci_init4_req() the request is being initialised from cpu-endian data but the packet is specified to be little-endian. This causes an warning from sparse due to __le16 to u16 conversion. Fix this by using cpu_to_le16() on the two fields in the packet. net/bluetooth/hci_core.c:845:27: warning: incorrect type in assignment (different base types) net/bluetooth/hci_core.c:845:27: expected restricted __le16 [usertype] tx_len net/bluetooth/hci_core.c:845:27: got unsigned short [usertype] le_max_tx_len net/bluetooth/hci_core.c:846:28: warning: incorrect type in assignment (different base types) net/bluetooth/hci_core.c:846:28: expected restricted __le16 [usertype] tx_time net/bluetooth/hci_core.c:846:28: got unsigned short [usertype] le_max_tx_time Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-10-16Bluetooth: remove set but not used variable 'smp'YueHaibing1-6/+0
Fixes gcc '-Wunused-but-set-variable' warning: net/bluetooth/smp.c: In function 'smp_irk_matches': net/bluetooth/smp.c:505:18: warning: variable 'smp' set but not used [-Wunused-but-set-variable] net/bluetooth/smp.c: In function 'smp_generate_rpa': net/bluetooth/smp.c:526:18: warning: variable 'smp' set but not used [-Wunused-but-set-variable] It is not used since commit 28a220aac596 ("bluetooth: switch to AES library") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds4-16/+27
Pull networking updates from David Miller: 1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski. 2) Use bio_vec in the networking instead of custom skb_frag_t, from Matthew Wilcox. 3) Make use of xmit_more in r8169 driver, from Heiner Kallweit. 4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen. 5) Support all variants of 5750X bnxt_en chips, from Michael Chan. 6) More RTNL avoidance work in the core and mlx5 driver, from Vlad Buslov. 7) Add TCP syn cookies bpf helper, from Petar Penkov. 8) Add 'nettest' to selftests and use it, from David Ahern. 9) Add extack support to drop_monitor, add packet alert mode and support for HW drops, from Ido Schimmel. 10) Add VLAN offload to stmmac, from Jose Abreu. 11) Lots of devm_platform_ioremap_resource() conversions, from YueHaibing. 12) Add IONIC driver, from Shannon Nelson. 13) Several kTLS cleanups, from Jakub Kicinski. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits) mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer mlxsw: spectrum: Register CPU port with devlink mlxsw: spectrum_buffers: Prevent changing CPU port's configuration net: ena: fix incorrect update of intr_delay_resolution net: ena: fix retrieval of nonadaptive interrupt moderation intervals net: ena: fix update of interrupt moderation register net: ena: remove all old adaptive rx interrupt moderation code from ena_com net: ena: remove ena_restore_ethtool_params() and relevant fields net: ena: remove old adaptive interrupt moderation code from ena_netdev net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*() net: ena: enable the interrupt_moderation in driver_supported_features net: ena: reimplement set/get_coalesce() net: ena: switch to dim algorithm for rx adaptive interrupt moderation net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable ethtool: implement Energy Detect Powerdown support via phy-tunable xen-netfront: do not assume sk_buff_head list is empty in error handling s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb” net: ena: don't wake up tx queue when down drop_monitor: Better sanitize notified packets ...
2019-09-18Merge branch 'linus' of ↵Linus Torvalds2-73/+33
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add the ability to abort a skcipher walk. Algorithms: - Fix XTS to actually do the stealing. - Add library helpers for AES and DES for single-block users. - Add library helpers for SHA256. - Add new DES key verification helper. - Add surrounding bits for ESSIV generator. - Add accelerations for aegis128. - Add test vectors for lzo-rle. Drivers: - Add i.MX8MQ support to caam. - Add gcm/ccm/cfb/ofb aes support in inside-secure. - Add ofb/cfb aes support in media-tek. - Add HiSilicon ZIP accelerator support. Others: - Fix potential race condition in padata. - Use unbound workqueues in padata" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (311 commits) crypto: caam - Cast to long first before pointer conversion crypto: ccree - enable CTS support in AES-XTS crypto: inside-secure - Probe transform record cache RAM sizes crypto: inside-secure - Base RD fetchcount on actual RD FIFO size crypto: inside-secure - Base CD fetchcount on actual CD FIFO size crypto: inside-secure - Enable extended algorithms on newer HW crypto: inside-secure: Corrected configuration of EIP96_TOKEN_CTRL crypto: inside-secure - Add EIP97/EIP197 and endianness detection padata: remove cpu_index from the parallel_queue padata: unbind parallel jobs from specific CPUs padata: use separate workqueues for parallel and serial work padata, pcrypt: take CPU hotplug lock internally in padata_alloc_possible crypto: pcrypt - remove padata cpumask notifier padata: make padata_do_parallel find alternate callback CPU workqueue: require CPU hotplug read exclusion for apply_workqueue_attrs workqueue: unconfine alloc/apply/free_workqueue_attrs() padata: allocate workqueue internally arm64: dts: imx8mq: Add CAAM node random: Use wait_event_freezable() in add_hwgenerator_randomness() crypto: ux500 - Fix COMPILE_TEST warnings ...
2019-09-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-13/+1
Minor overlapping changes in the btusb and ixgbe drivers. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06Bluetooth: hidp: Fix assumptions on the return value of hidp_send_messageDan Elkouby1-2/+2
hidp_send_message was changed to return non-zero values on success, which some other bits did not expect. This caused spurious errors to be propagated through the stack, breaking some drivers, such as hid-sony for the Dualshock 4 in Bluetooth mode. As pointed out by Dan Carpenter, hid-microsoft directly relied on that assumption as well. Fixes: 48d9cc9d85dd ("Bluetooth: hidp: Let hidp_send_message return number of queued bytes") Signed-off-by: Dan Elkouby <streetwalkermc@gmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: mgmt: Use struct_size() helperGustavo A. R. Silva1-6/+2
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct mgmt_rp_get_connections { ... struct mgmt_addr_info addr[0]; } __packed; Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. So, replace the following form: sizeof(*rp) + (i * sizeof(struct mgmt_addr_info)); with: struct_size(rp, addr, i) Also, notice that, in this case, variable rp_len is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: 6lowpan: Make variable header_ops constantNishka Dasgupta1-1/+1
Static variable header_ops, of type header_ops, is used only once, when it is assigned to field header_ops of a variable having type net_device. This corresponding field is declared as const in the definition of net_device. Hence make header_ops constant as well to protect it from unnecessary modification. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: Add support for utilizing Fast Advertising IntervalSpoorthi Ravishankar Koppad1-7/+22
Changes made to add support for fast advertising interval as per core 4.1 specification, section 9.3.11.2. A peripheral device entering any of the following GAP modes and sending either non-connectable advertising events or scannable undirected advertising events should use adv_fast_interval2 (100ms - 150ms) for adv_fast_period(30s). - Non-Discoverable Mode - Non-Connectable Mode - Limited Discoverable Mode - General Discoverable Mode Signed-off-by: Spoorthi Ravishankar Koppad <spoorthix.k@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Revert "Bluetooth: validate BLE connection interval updates"Marcel Holtmann2-13/+1
This reverts commit c49a8682fc5d298d44e8d911f4fa14690ea9485e. There are devices which require low connection intervals for usable operation including keyboards and mice. Forcing a static connection interval for these types of devices has an impact in latency and causes a regression. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2019-08-17Bluetooth: Add debug setting for changing minimum encryption key sizeMarcel Holtmann3-1/+33
For testing and qualification purposes it is useful to allow changing the minimum encryption key size value that the host stack is going to enforce. This adds a new debugfs setting min_encrypt_key_size to achieve this functionality. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2019-08-12Bluetooth: hidp: Let hidp_send_message return number of queued bytesFabian Henneke1-2/+7
Let hidp_send_message return the number of successfully queued bytes instead of an unconditional 0. With the return value fixed to 0, other drivers relying on hidp, such as hidraw, can not return meaningful values from their respective implementations of write(). In particular, with the current behavior, a hidraw device's write() will have different return values depending on whether the device is connected via USB or Bluetooth, which makes it harder to abstract away the transport layer. Signed-off-by: Fabian Henneke <fabian.henneke@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-26bluetooth: switch to AES libraryArd Biesheuvel2-73/+33
The bluetooth code uses a bare AES cipher for the encryption operations. Given that it carries out a set_key() operation right before every encryption operation, this is clearly not a hot path, and so the use of the cipher interface (which provides the best implementation available on the system) is not really required. In fact, when using a cipher like AES-NI or AES-CE, both the set_key() and the encrypt() operations involve en/disabling preemption as well as stacking and unstacking the SIMD context, and this is most certainly not worth it for encrypting 16 bytes of data. So let's switch to the new lightweight library interface instead. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds11-31/+214
Pull networking updates from David Miller: "Some highlights from this development cycle: 1) Big refactoring of ipv6 route and neigh handling to support nexthop objects configurable as units from userspace. From David Ahern. 2) Convert explored_states in BPF verifier into a hash table, significantly decreased state held for programs with bpf2bpf calls, from Alexei Starovoitov. 3) Implement bpf_send_signal() helper, from Yonghong Song. 4) Various classifier enhancements to mvpp2 driver, from Maxime Chevallier. 5) Add aRFS support to hns3 driver, from Jian Shen. 6) Fix use after free in inet frags by allocating fqdirs dynamically and reworking how rhashtable dismantle occurs, from Eric Dumazet. 7) Add act_ctinfo packet classifier action, from Kevin Darbyshire-Bryant. 8) Add TFO key backup infrastructure, from Jason Baron. 9) Remove several old and unused ISDN drivers, from Arnd Bergmann. 10) Add devlink notifications for flash update status to mlxsw driver, from Jiri Pirko. 11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski. 12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes. 13) Various enhancements to ipv6 flow label handling, from Eric Dumazet and Willem de Bruijn. 14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van der Merwe, and others. 15) Various improvements to axienet driver including converting it to phylink, from Robert Hancock. 16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean. 17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana Radulescu. 18) Add devlink health reporting to mlx5, from Moshe Shemesh. 19) Convert stmmac over to phylink, from Jose Abreu. 20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from Shalom Toledo. 21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera. 22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel. 23) Track spill/fill of constants in BPF verifier, from Alexei Starovoitov. 24) Support bounded loops in BPF, from Alexei Starovoitov. 25) Various page_pool API fixes and improvements, from Jesper Dangaard Brouer. 26) Just like ipv4, support ref-countless ipv6 route handling. From Wei Wang. 27) Support VLAN offloading in aquantia driver, from Igor Russkikh. 28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy. 29) Add flower GRE encap/decap support to nfp driver, from Pieter Jansen van Vuuren. 30) Protect against stack overflow when using act_mirred, from John Hurley. 31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen. 32) Use page_pool API in netsec driver, Ilias Apalodimas. 33) Add Google gve network driver, from Catherine Sullivan. 34) More indirect call avoidance, from Paolo Abeni. 35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan. 36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek. 37) Add MPLS manipulation actions to TC, from John Hurley. 38) Add sending a packet to connection tracking from TC actions, and then allow flower classifier matching on conntrack state. From Paul Blakey. 39) Netfilter hw offload support, from Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits) net/mlx5e: Return in default case statement in tx_post_resync_params mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync(). net: dsa: add support for BRIDGE_MROUTER attribute pkt_sched: Include const.h net: netsec: remove static declaration for netsec_set_tx_de() net: netsec: remove superfluous if statement netfilter: nf_tables: add hardware offload support net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload net: flow_offload: add flow_block_cb_is_busy() and use it net: sched: remove tcf block API drivers: net: use flow block API net: sched: use flow block API net: flow_offload: add flow_block_cb_{priv, incref, decref}() net: flow_offload: add list handling functions net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free() net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND net: flow_offload: add flow_block_cb_setup_simple() net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC ...
2019-07-06Bluetooth: 6lowpan: always check destination addressJosua Mayer1-12/+0
BLE based 6LoWPAN networks are highly constrained in bandwidth. Do not take a short-cut, always check if the destination address is known to belong to a peer. As a side-effect this also removes any behavioral differences between one, and two or more connected peers. Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Tested-by: Michael Scott <mike@foundries.io> Signed-off-by: Josua Mayer <josua.mayer@jm0.eu> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: 6lowpan: check neighbour table for SLAACJosua Mayer1-0/+15
Like any IPv6 capable device, 6LNs can have multiple addresses assigned using SLAAC and made known through neighbour advertisements. After checking the destination address against all peers link-local addresses, consult the neighbour cache for additional known addresses. RFC7668 defines the scope of Neighbor Advertisements in Section 3.2.3: 1. "A Bluetooth LE 6LN MUST NOT register its link-local address" 2. "A Bluetooth LE 6LN MUST register its non-link-local addresses with the 6LBR by sending Neighbor Solicitation (NS) messages ..." Due to these constranits both the link-local addresses tracked in the list of 6lowpan peers, and the neighbour cache have to be used when identifying the 6lowpan peer for a destination address. Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Tested-by: Michael Scott <mike@foundries.io> Signed-off-by: Josua Mayer <josua.mayer@jm0.eu> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-19 07:46:52 +0300