| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"
* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...
|
|
It seems like Fedora 34 ends up enabling a few new gcc warnings, notably
"-Wstringop-overread" and "-Warray-parameter".
Both of them cause what seem to be valid warnings in the kernel, where
we have array size mismatches in function arguments (that are no longer
just silently converted to a pointer to element, but actually checked).
This fixes most of the trivial ones, by making the function declaration
match the function definition, and in the case of intel_pm.c, removing
the over-specified array size from the argument declaration.
At least one 'stringop-overread' warning remains in the i915 driver, but
that one doesn't have the same obvious trivial fix, and may or may not
actually be indicative of a bug.
[ It was a mistake to upgrade one of my machines to Fedora 34 while
being busy with the merge window, but if this is the extent of the
compiler upgrade problems, things are better than usual - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of various smaller driver subsystem updates for
5.13-rc1.
Major bits in here are:
- habanalabs driver updates
- hwtracing driver updates
- interconnect driver updates
- mhi driver updates
- extcon driver updates
- fpga driver updates
- new binder features added
- nvmem driver updates
- phy driver updates
- soundwire driver updates
- smaller misc and char driver fixes and updates.
- bluetooth driver bugfix that maintainer wanted to go through this
tree.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
bluetooth: eliminate the potential race condition when removing the HCI controller
coresight: etm-perf: Fix define build issue when built as module
phy: Revert "phy: ti: j721e-wiz: add missing of_node_put"
phy: ti: j721e-wiz: Add missing include linux/slab.h
phy: phy-twl4030-usb: Fix possible use-after-free in twl4030_usb_remove()
stm class: Use correct UUID APIs
intel_th: pci: Add Alder Lake-M support
intel_th: pci: Add Rocket Lake CPU support
intel_th: Consistency and off-by-one fix
intel_th: Constify attribute_group structs
intel_th: Constify all drvdata references
stm class: Remove an unused function
habanalabs/gaudi: Fix uninitialized return code rc when read size is zero
greybus: es2: fix kernel-doc warnings
mei: me: add Alder Lake P device id.
dw-xdata-pcie: Update outdated info and improve text format
dw-xdata-pcie: Fix documentation build warns
fbdev: zero-fill colormap in fbcmap.c
firmware: qcom-scm: Fix QCOM_SCM configuration
speakup: i18n: Switch to kmemdup_nul() in spk_msg_set()
...
|
|
controller
There is a possible race condition vulnerability between issuing a HCI
command and removing the cont. Specifically, functions hci_req_sync()
and hci_dev_do_close() can race each other like below:
thread-A in hci_req_sync() | thread-B in hci_dev_do_close()
| hci_req_sync_lock(hdev);
test_bit(HCI_UP, &hdev->flags); |
... | test_and_clear_bit(HCI_UP, &hdev->flags)
hci_req_sync_lock(hdev); |
|
In this commit we alter the sequence in function hci_req_sync(). Hence,
the thread-A cannot issue th.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Cc: Marcel Holtmann <marcel@holtmann.org>
Fixes: 7c6a329e4447 ("[Bluetooth] Fix regression from using default link policy")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some controllers don't support the Simple Pairing Options feature that
can indicate the support for P-192 and P-256 public key validation.
However they might support the Microsoft vendor extension that can
indicate the validiation capability as well.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The le_scan_{int,window}_adv_monitor settings have not been set with a
sensible default.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When drivers indicate support for AOSP vendor extension, initialize them
and read its capabilities.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
allow RPA to add bd address to whitelist
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
own_address_type has to changed to 0x02 and 0x03 only when
HCI_ENABLE_LL_PRIVACY flag is set.
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
We set hdev->cur_adv_instance in the adv param MGMT request to allow the
callback to the hci param request to set the tx power to the correct
instance. Now that the callbacks use the advertising handle from the hci
request (as they should), this workaround is no longer necessary.
Furthermore, this change resolves a race condition that is more
prevalent when using the extended advertising MGMT calls - if
hdev->cur_adv_instance is set in the params request, then when the data
request is called, we believe our new instance is already active. This
treats it as an update and immediately schedules the instance with the
controller, which has a potential race with the software rotation adv
update. By not setting hdev->cur_adv_instance too early, the new
instance is queued as it should be, to be used when the rotation comes
around again.
This change is tested on harrison peak to confirm that it resolves the
race condition on registration, and that there is no regression in
single- and multi-advertising automated tests.
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Some extended advertising hci command complete events are still using
hdev->cur_adv_instance to map the request to the correct advertisement
handle. However, with extended advertising, "current instance" doesn't
make sense as we can have multiple concurrent advertisements. This
change switches these command complete handlers to use the advertising
handle from the request/event, to ensure we will always use the correct
advertising handle regardless of the state of hdev->cur_adv_instance.
This change is tested on hatch and kefka chromebooks and run through
single- and multi-advertising automated tests to confirm callbacks
report tx power to the correct advertising handle, etc.
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Use the correct print format. Printing an unsigned int value should use %u
instead of %d. For details, please read document:
Documentation/core-api/printk-formats.rst
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This fixes kbuild findings:
smatch warnings:
net/bluetooth/smp.c:1633 smp_user_confirm_reply() warn: variable
dereferenced before check 'conn' (see line 1631)
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
There is a possibility where HCI_INQUIRY flag is set but we still
send HCI_OP_INQUIRY anyway.
Such a case can be reproduced by connecting to an LE device while
active scanning. When the device is discovered, we initiate a
connection, stop LE Scan, and send Discovery MGMT with status
disabled, but we don't cancel the inquiry.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
1. Add space when needed;
2. Block comments style fix;
3. Move open brace '{' following function definitions to the next line;
4. Remove unnecessary braces '{}' for single statement blocks.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
void function return statements are not generally useful.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Increment the mgmt revision due to recent changes.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The list of trusted events should contain the advertisement monitor
events and not the untrusted one, so move entries to the correct list.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The list of supported mgmt commands for PHY configuration is missing, so
just add them.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The read advertising features error handling returns false the opcode
for the set advertising command.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The return error when trying to change the setting when a controller is
powered up, shall be MGMT_STATUS_REJECTED. However instead now the error
MGMT_STATUS_NOT_POWERED is used which is exactly the opposite.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
s/minium/minimum/
s/procdure/procedure/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Macros should not use a trailing semicolon.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
remove trailing semicolon in macros and coding style fix.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
There is a possibility of receiving a zapped sock on
l2cap_sock_connect(). This could lead to interesting crashes, one
such case is tearing down an already tore l2cap_sock as is happened
with this call trace:
__dump_stack lib/dump_stack.c:15 [inline]
dump_stack+0xc4/0x118 lib/dump_stack.c:56
register_lock_class kernel/locking/lockdep.c:792 [inline]
register_lock_class+0x239/0x6f6 kernel/locking/lockdep.c:742
__lock_acquire+0x209/0x1e27 kernel/locking/lockdep.c:3105
lock_acquire+0x29c/0x2fb kernel/locking/lockdep.c:3599
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:137 [inline]
_raw_spin_lock_bh+0x38/0x47 kernel/locking/spinlock.c:175
spin_lock_bh include/linux/spinlock.h:307 [inline]
lock_sock_nested+0x44/0xfa net/core/sock.c:2518
l2cap_sock_teardown_cb+0x88/0x2fb net/bluetooth/l2cap_sock.c:1345
l2cap_chan_del+0xa3/0x383 net/bluetooth/l2cap_core.c:598
l2cap_chan_close+0x537/0x5dd net/bluetooth/l2cap_core.c:756
l2cap_chan_timeout+0x104/0x17e net/bluetooth/l2cap_core.c:429
process_one_work+0x7e3/0xcb0 kernel/workqueue.c:2064
worker_thread+0x5a5/0x773 kernel/workqueue.c:2196
kthread+0x291/0x2a6 kernel/kthread.c:211
ret_from_fork+0x4e/0x80 arch/x86/entry/entry_64.S:604
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reported-by: syzbot+abfc0f5e668d4099af73@syzkaller.appspotmail.com
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
gcc-11 points out that the declaration does not match the definition:
net/bluetooth/ecdh_helper.c:122:55: error: argument 2 of type ‘const u8[32]’ {aka ‘const unsigned char[32]’} with mismatched bound [-Werror=array-parameter=]
122 | int set_ecdh_privkey(struct crypto_kpp *tfm, const u8 private_key[32])
| ~~~~~~~~~^~~~~~~~~~~~~~~
In file included from net/bluetooth/ecdh_helper.c:23:
net/bluetooth/ecdh_helper.h:28:56: note: previously declared as ‘const u8 *’ {aka ‘const unsigned char *’}
28 | int set_ecdh_privkey(struct crypto_kpp *tfm, const u8 *private_key);
| ~~~~~~~~~~^~~~~~~~~~~
Change the declaration to contain the size of the array, rather than
just a pointer.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
syzbot is hitting "INFO: trying to register non-static key." message [1],
for "struct l2cap_chan"->tx_q.lock spinlock is not yet initialized when
l2cap_chan_del() is called due to e.g. timeout.
Since "struct l2cap_chan"->lock mutex is initialized at l2cap_chan_create()
immediately after "struct l2cap_chan" is allocated using kzalloc(), let's
as well initialize "struct l2cap_chan"->{tx_q,srej_q}.lock spinlocks there.
[1] https://syzkaller.appspot.com/bug?extid=fadfba6a911f6bf71842
Reported-and-tested-by: syzbot <syzbot+fadfba6a911f6bf71842@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
hci_chan can be created in 2 places: hci_loglink_complete_evt() if
it is an AMP hci_chan, or l2cap_conn_add() otherwise. In theory,
Only AMP hci_chan should be removed by a call to
hci_disconn_loglink_complete_evt(). However, the controller might mess
up, call that function, and destroy an hci_chan which is not initiated
by hci_loglink_complete_evt().
This patch adds a verification that the destroyed hci_chan must have
been init'd by hci_loglink_complete_evt().
Example crash call trace:
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xe3/0x144 lib/dump_stack.c:118
print_address_description+0x67/0x22a mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report mm/kasan/report.c:412 [inline]
kasan_report+0x251/0x28f mm/kasan/report.c:396
hci_send_acl+0x3b/0x56e net/bluetooth/hci_core.c:4072
l2cap_send_cmd+0x5af/0x5c2 net/bluetooth/l2cap_core.c:877
l2cap_send_move_chan_cfm_icid+0x8e/0xb1 net/bluetooth/l2cap_core.c:4661
l2cap_move_fail net/bluetooth/l2cap_core.c:5146 [inline]
l2cap_move_channel_rsp net/bluetooth/l2cap_core.c:5185 [inline]
l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:5464 [inline]
l2cap_sig_channel net/bluetooth/l2cap_core.c:5799 [inline]
l2cap_recv_frame+0x1d12/0x51aa net/bluetooth/l2cap_core.c:7023
l2cap_recv_acldata+0x2ea/0x693 net/bluetooth/l2cap_core.c:7596
hci_acldata_packet net/bluetooth/hci_core.c:4606 [inline]
hci_rx_work+0x2bd/0x45e net/bluetooth/hci_core.c:4796
process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
kthread+0x2f0/0x304 kernel/kthread.c:253
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415
Allocated by task 38:
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0x8d/0x9a mm/kasan/kasan.c:553
kmem_cache_alloc_trace+0x102/0x129 mm/slub.c:2787
kmalloc include/linux/slab.h:515 [inline]
kzalloc include/linux/slab.h:709 [inline]
hci_chan_create+0x86/0x26d net/bluetooth/hci_conn.c:1674
l2cap_conn_add.part.0+0x1c/0x814 net/bluetooth/l2cap_core.c:7062
l2cap_conn_add net/bluetooth/l2cap_core.c:7059 [inline]
l2cap_connect_cfm+0x134/0x852 net/bluetooth/l2cap_core.c:7381
hci_connect_cfm+0x9d/0x122 include/net/bluetooth/hci_core.h:1404
hci_remote_ext_features_evt net/bluetooth/hci_event.c:4161 [inline]
hci_event_packet+0x463f/0x72fa net/bluetooth/hci_event.c:5981
hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791
process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
kthread+0x2f0/0x304 kernel/kthread.c:253
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415
Freed by task 1732:
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free mm/kasan/kasan.c:521 [inline]
__kasan_slab_free+0x106/0x128 mm/kasan/kasan.c:493
slab_free_hook mm/slub.c:1409 [inline]
slab_free_freelist_hook+0xaa/0xf6 mm/slub.c:1436
slab_free mm/slub.c:3009 [inline]
kfree+0x182/0x21e mm/slub.c:3972
hci_disconn_loglink_complete_evt net/bluetooth/hci_event.c:4891 [inline]
hci_event_packet+0x6a1c/0x72fa net/bluetooth/hci_event.c:6050
hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791
process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
kthread+0x2f0/0x304 kernel/kthread.c:253
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415
The buggy address belongs to the object at ffff8881d7af9180
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 24 bytes inside of
128-byte region [ffff8881d7af9180, ffff8881d7af9200)
The buggy address belongs to the page:
page:ffffea00075ebe40 count:1 mapcount:0 mapping:ffff8881da403200 index:0x0
flags: 0x8000000000000200(slab)
raw: 8000000000000200 dead000000000100 dead000000000200 ffff8881da403200
raw: 0000000000000000 0000000080150015 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881d7af9080: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
ffff8881d7af9100: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff8881d7af9180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881d7af9200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8881d7af9280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reported-by: syzbot+98228e7407314d2d4ba2@syzkaller.appspotmail.com
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Currently l2cap_chan_set_defaults() reset chan->conf_state to zero.
However, there is a flag CONF_NOT_COMPLETE which is set when
creating the l2cap_chan. It is suggested that the flag should be
cleared when l2cap_chan is ready, but when l2cap_chan_set_defaults()
is called, l2cap_chan is not yet ready. Therefore, we must set this
flag as the default.
Example crash call trace:
__dump_stack lib/dump_stack.c:15 [inline]
dump_stack+0xc4/0x118 lib/dump_stack.c:56
panic+0x1c6/0x38b kernel/panic.c:117
__warn+0x170/0x1b9 kernel/panic.c:471
warn_slowpath_fmt+0xc7/0xf8 kernel/panic.c:494
debug_print_object+0x175/0x193 lib/debugobjects.c:260
debug_object_assert_init+0x171/0x1bf lib/debugobjects.c:614
debug_timer_assert_init kernel/time/timer.c:629 [inline]
debug_assert_init kernel/time/timer.c:677 [inline]
del_timer+0x7c/0x179 kernel/time/timer.c:1034
try_to_grab_pending+0x81/0x2e5 kernel/workqueue.c:1230
cancel_delayed_work+0x7c/0x1c4 kernel/workqueue.c:2929
l2cap_clear_timer+0x1e/0x41 include/net/bluetooth/l2cap.h:834
l2cap_chan_del+0x2d8/0x37e net/bluetooth/l2cap_core.c:640
l2cap_chan_close+0x532/0x5d8 net/bluetooth/l2cap_core.c:756
l2cap_sock_shutdown+0x806/0x969 net/bluetooth/l2cap_sock.c:1174
l2cap_sock_release+0x64/0x14d net/bluetooth/l2cap_sock.c:1217
__sock_release+0xda/0x217 net/socket.c:580
sock_close+0x1b/0x1f net/socket.c:1039
__fput+0x322/0x55c fs/file_table.c:208
____fput+0x17/0x19 fs/file_table.c:244
task_work_run+0x19b/0x1d3 kernel/task_work.c:115
exit_task_work include/linux/task_work.h:21 [inline]
do_exit+0xe4c/0x204a kernel/exit.c:766
do_group_exit+0x291/0x291 kernel/exit.c:891
get_signal+0x749/0x1093 kernel/signal.c:2396
do_signal+0xa5/0xcdb arch/x86/kernel/signal.c:737
exit_to_usermode_loop arch/x86/entry/common.c:243 [inline]
prepare_exit_to_usermode+0xed/0x235 arch/x86/entry/common.c:277
syscall_return_slowpath+0x3a7/0x3b3 arch/x86/entry/common.c:348
int_ret_from_sys_call+0x25/0xa3
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reported-by: syzbot+338f014a98367a08a114@syzkaller.appspotmail.com
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Skip updation of tx and rx PHYs values, when PHY Update
event's status is not successful.
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Commit eab2404ba798 ("Bluetooth: Add BT_PHY socket option") added a
dependency between socket lock and hci_dev->lock that could lead to
deadlock.
It turns out that hci_conn_get_phy() is not in any way relying on hdev
being immutable during the runtime of this function, neither does it even
look at any of the members of hdev, and as such there is no need to hold
that lock.
This fixes the lockdep splat below:
======================================================
WARNING: possible circular locking dependency detected
5.12.0-rc1-00026-g73d464503354 #10 Not tainted
------------------------------------------------------
bluetoothd/1118 is trying to acquire lock:
ffff8f078383c078 (&hdev->lock){+.+.}-{3:3}, at: hci_conn_get_phy+0x1c/0x150 [bluetooth]
but task is already holding lock:
ffff8f07e831d920 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}, at: l2cap_sock_getsockopt+0x8b/0x610
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}:
lock_sock_nested+0x72/0xa0
l2cap_sock_ready_cb+0x18/0x70 [bluetooth]
l2cap_config_rsp+0x27a/0x520 [bluetooth]
l2cap_sig_channel+0x658/0x1330 [bluetooth]
l2cap_recv_frame+0x1ba/0x310 [bluetooth]
hci_rx_work+0x1cc/0x640 [bluetooth]
process_one_work+0x244/0x5f0
worker_thread+0x3c/0x380
kthread+0x13e/0x160
ret_from_fork+0x22/0x30
-> #2 (&chan->lock#2/1){+.+.}-{3:3}:
__mutex_lock+0xa3/0xa10
l2cap_chan_connect+0x33a/0x940 [bluetooth]
l2cap_sock_connect+0x141/0x2a0 [bluetooth]
__sys_connect+0x9b/0xc0
__x64_sys_connect+0x16/0x20
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #1 (&conn->chan_lock){+.+.}-{3:3}:
__mutex_lock+0xa3/0xa10
l2cap_chan_connect+0x322/0x940 [bluetooth]
l2cap_sock_connect+0x141/0x2a0 [bluetooth]
__sys_connect+0x9b/0xc0
__x64_sys_connect+0x16/0x20
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #0 (&hdev->lock){+.+.}-{3:3}:
__lock_acquire+0x147a/0x1a50
lock_acquire+0x277/0x3d0
__mutex_lock+0xa3/0xa10
hci_conn_get_phy+0x1c/0x150 [bluetooth]
l2cap_sock_getsockopt+0x5a9/0x610 [bluetooth]
__sys_getsockopt+0xcc/0x200
__x64_sys_getsockopt+0x20/0x30
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
other info that might help us debug this:
Chain exists of:
&hdev->lock --> &chan->lock#2/1 --> sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP);
lock(&chan->lock#2/1);
lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP);
lock(&hdev->lock);
*** DEADLOCK ***
1 lock held by bluetoothd/1118:
#0: ffff8f07e831d920 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}, at: l2cap_sock_getsockopt+0x8b/0x610 [bluetooth]
stack backtrace:
CPU: 3 PID: 1118 Comm: bluetoothd Not tainted 5.12.0-rc1-00026-g73d464503354 #10
Hardware name: LENOVO 20K5S22R00/20K5S22R00, BIOS R0IET38W (1.16 ) 05/31/2017
Call Trace:
dump_stack+0x7f/0xa1
check_noncircular+0x105/0x120
? __lock_acquire+0x147a/0x1a50
__lock_acquire+0x147a/0x1a50
lock_acquire+0x277/0x3d0
? hci_conn_get_phy+0x1c/0x150 [bluetooth]
? __lock_acquire+0x2e1/0x1a50
? lock_is_held_type+0xb4/0x120
? hci_conn_get_phy+0x1c/0x150 [bluetooth]
__mutex_lock+0xa3/0xa10
? hci_conn_get_phy+0x1c/0x150 [bluetooth]
? lock_acquire+0x277/0x3d0
? mark_held_locks+0x49/0x70
? mark_held_locks+0x49/0x70
? hci_conn_get_phy+0x1c/0x150 [bluetooth]
hci_conn_get_phy+0x1c/0x150 [bluetooth]
l2cap_sock_getsockopt+0x5a9/0x610 [bluetooth]
__sys_getsockopt+0xcc/0x200
__x64_sys_getsockopt+0x20/0x30
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fb73df33eee
Code: 48 8b 0d 85 0f 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 37 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 52 0f 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007fffcfbbbf08 EFLAGS: 00000203 ORIG_RAX: 0000000000000037
RAX: ffffffffffffffda RBX: 0000000000000019 RCX: 00007fb73df33eee
RDX: 000000000000000e RSI: 0000000000000112 RDI: 0000000000000018
RBP: 0000000000000000 R08: 00007fffcfbbbf44 R09: 0000000000000000
R10: 00007fffcfbbbf3c R11: 0000000000000203 R12: 0000000000000000
R13: 0000000000000018 R14: 0000000000000000 R15: 0000556fcefc70d0
Fixes: eab2404ba798 ("Bluetooth: Add BT_PHY socket option")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This converts instances of BT_ERR and BT_DBG to bt_dev_err and
bt_dev_dbg which can be enabled at runtime when BT_FEATURE_DEBUG is
enabled.
Note: Not all instances could be converted as some are exercised by
selftest.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
When receiving L2CAP_CREDIT_BASED_CONNECTION_REQ the remote may request
more channels than allowed by the spec (10 octecs = 5 CIDs) so this
checks if the number of channels is bigger than the maximum allowed and
respond with an error.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Not cancelling it has caused a bug where passive background scanning is
disabled out of the blue, preventing BLE keyboards/mice to reconnect.
Here is how it happens:
After hci_req_stop_discovery, there is still le_scan_restart_work
scheduled. Invocation of le_scan_restart_work causes a harmful
le_scan_disable_work to be scheduled. This le_scan_disable_work will
eventually disable passive scanning when the timer fires.
Sample btmon trace:
< HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7
Type: Passive (0x00)
Interval: 367.500 msec (0x024c)
Window: 37.500 msec (0x003c)
Own address type: Public (0x00)
Filter policy: Accept all advertisement (0x00)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Scan Parameters (0x08|0x000b) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2
Scanning: Enabled (0x01)
Filter duplicates: Disabled (0x00)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Scan Enable (0x08|0x000c) ncmd 2
Status: Success (0x00)
...
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2
Scanning: Disabled (0x00)
Filter duplicates: Disabled (0x00)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Scan Enable (0x08|0x000c) ncmd 2
Status: Success (0x00)
// Background scanning is not working here onwards.
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Sonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
1. crypto and crypto/atmel-ecc:
Move curve id of ECDH from the key into the algorithm name instead
in crypto and atmel-ecc, so ECDH algorithm name change form 'ecdh'
to 'ecdh-nist-pxxx', and we cannot use 'curve_id' in 'struct ecdh';
2. crypto/testmgr and net/bluetooth:
Modify 'testmgr.c', 'testmgr.h' and 'net/bluetooth' to adapt
the modification.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This fails the pairing procedure when both remote and local non-debug
public keys are identical.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
An issue was found, where if a bluetooth client requests a broadcast
advertisement with scan response data, it will not be properly
registered with the controller. This is because at the time that the
hci_cp_le_set_scan_param structure is created, the scan response will
not yet have been received since it comes in a second MGMT call. With
empty scan response, the request defaults to a non-scannable PDU type.
On some controllers, the subsequent scan response request will fail due
to incorrect PDU type, and others will succeed and not use the scan
response.
This fix allows the advertising parameters MGMT call to include a flag
to let the kernel know whether a scan response will be coming, so that
the correct PDU type is used in the first place. A bluetoothd change is
also incoming to take advantage of it.
To test this, I created a broadcast advertisement with scan response
data and registered it on the hatch chromebook. Without this change, the
request fails, and with it will succeed.
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
During suspend, there are a few scan enable and set event filter
commands that don't need to be sent unless there are actual BR/EDR
devices capable of waking the system. Check the HCI_PSCAN bit before
writing scan enable and use a new dev flag, HCI_EVENT_FILTER_CONFIGURED
to control whether to clear the event filter.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
When suspending, Bluetooth disconnects all connected peers devices. If
an LE connection is started but isn't completed, we will see an LE
Create Connection Cancel instead of an HCI disconnect. This just adds
a check to see if an LE cancel was the last disconnected device and wake
the suspend thread when that is the case.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Archie Pusaka <apusaka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
el/git/bluetooth/bluetooth-next
Johan Hedberg says:
====================
pull request: bluetooth-next 2021-02-11
Here's the main bluetooth-next pull request for 5.12:
- Add support for advertising monitor offliading using Microsoft
vendor extensions
- Add firmware download support for MediaTek MT7921U USB devices
- Suspend-related fixes for Qualcomm devices
- Add support for Intel GarfieldPeak controller
- Various other smaller fixes & cleanups
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If hci_add_adv_monitor is a pending command(e.g. forward to
msft_add_monitor_pattern), it is possible that
mgmt_add_adv_patterns_monitor_complete gets called before
cmd->user_data gets set, which will cause a crash when we
try to get the moniter handle through cmd->user_data in
mgmt_add_adv_patterns_monitor_complete.
This moves the cmd->user_data assignment earlier than
hci_add_adv_monitor.
RIP: 0010:mgmt_add_adv_patterns_monitor_complete+0x82/0x187 [bluetooth]
Code: 1e bf 03 00 00 00 be 52 00 00 00 4c 89 ea e8 9e
e4 02 00 49 89 c6 48 85 c0 0f 84 06 01 00 00 48 89 5d b8 4c 89 fb 4d 8b
7e 30 <41> 0f b7 47 18 66 89 45 c0 45 84 e4 75 5a 4d 8b 56 28 48 8d 4d
c8
RSP: 0018:ffffae81807dbcb8 EFLAGS: 00010286
RAX: ffff91c4bdf723c0 RBX: 0000000000000000 RCX: ffff91c4e5da5b80
RDX: ffff91c405680000 RSI: 0000000000000052 RDI: ffff91c49d654c00
RBP: ffffae81807dbd00 R08: ffff91c49fb157e0 R09: ffff91c49fb157e0
R10: 000000000002a4f0 R11: ffffffffc0819cfd R12: 0000000000000000
R13: ffff91c405680000 R14: ffff91c4bdf723c0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff91c4ea300000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000018 CR3: 0000000133612002 CR4:
00000000003606e0
Call Trace:
? msft_le_monitor_advertisement_cb+0x111/0x141
[bluetooth]
hci_event_packet+0x425e/0x631c [bluetooth]
? printk+0x59/0x73
? __switch_to_asm+0x41/0x70
?
msft_le_set_advertisement_filter_enable_cb+0xa6/0xa6 [bluetooth]
? bt_dbg+0xb4/0xbb [bluetooth]
? __switch_to_asm+0x41/0x70
hci_rx_work+0x101/0x319 [bluetooth]
process_one_work+0x257/0x506
worker_thread+0x10d/0x284
kthread+0x14c/0x154
? process_one_work+0x506/0x506
? kthread_blkcg+0x2c/0x2c
ret_from_fork+0x1f/0x40
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Manish Mandlik <mmandlik@chromium.org>
Reviewed-by: Archie Pusaka <apusaka@chromium.org>
Signed-off-by: Howard Chung <howardchung@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
kernel panic trace looks like:
#5 [ffffb9e08698fc80] do_page_fault at ffffffffb666e0d7
#6 [ffffb9e08698fcb0] page_fault at ffffffffb70010fe
[exception RIP: amp_read_loc_assoc_final_data+63]
RIP: ffffffffc06ab54f RSP: ffffb9e08698fd68 RFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8c8845a5a000 RCX: 0000000000000004
RDX: 0000000000000000 RSI: ffff8c8b9153d000 RDI: ffff8c8845a5a000
RBP: ffffb9e08698fe40 R8: 00000000000330e0 R9: ffffffffc0675c94
R10: ffffb9e08698fe58 R11: 0000000000000001 R12: ffff8c8b9cbf6200
R13: 0000000000000000 R14: 0000000000000000 R15: ffff8c8b2026da0b
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffffb9e08698fda8] hci_event_packet at ffffffffc0676904 [bluetooth]
#8 [ffffb9e08698fe50] hci_rx_work at ffffffffc06629ac [bluetooth]
#9 [ffffb9e08698fe98] process_one_work at ffffffffb66f95e7
hcon->amp_mgr seems NULL triggered kernel panic in following line inside
function amp_read_loc_assoc_final_data
set_bit(READ_LOC_AMP_ASSOC_FINAL, &mgr->state);
Fixed by checking NULL for mgr.
Signed-off-by: Gopal Tiwari <gtiwari@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
If a peer device doesn't support eSCO 2M we should skip the params that
use it when setting up sync connection since they will always fail.
Signed-off-by: Yu Liu <yudiliu@google.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Signed-off-by: Tomoyuki Matsushita <xorphitus@fastmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE
for debugfs files.
Reported-by: Abaci Robot<abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Some devices, e.g. the RTL8723BS bluetooth part, some USB attached devices,
completely drop from the bus on a system-suspend. These devices will
have their driver unbound and rebound on resume (when the dropping of
the bus gets detected) and will show up as a new HCI after resume.
These devices do not benefit from the suspend / resume handling work done
by the hci_suspend_notifier. At best this unnecessarily adds some time to
the suspend/resume time. But this may also actually cause problems, if the
code doing the driver unbinding runs after the pm-notifier then the
hci_suspend_notifier code will try to talk to a device which is now in
an uninitialized state.
This commit adds a new HCI_QUIRK_NO_SUSPEND_NOTIFIER quirk which allows
drivers to opt-out of the hci_suspend_notifier when they know beforehand
that their device will be fully re-initialized / reprobed on resume.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
These Kconfig files are included from net/Kconfig, inside the
if NET ... endif.
Remove 'depends on NET', which we know it is already met.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210125232026.106855-1-masahiroy@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current implementation of L2CAP options negotiation will continue
the negotiation when a device responds with L2CAP_CONF_UNACCEPT ("unaccepted
options"), but not when the device replies with L2CAP_CONF_UNKNOWN ("unknown
options").
Trying to continue the negotiation without ERTM support will allow
Bluetooth-capable XBox One controllers (notably models 1708 and 1797)
to connect.
btmon before patch:
> ACL Data RX: Handle 256 flags 0x02 dlen 16 #64 [hci0] 59.182702
L2CAP: Connection Response (0x03) ident 2 len 8
Destination CID: 64
Source CID: 64
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 23 #65 [hci0] 59.182744
L2CAP: Configure Request (0x04) ident 3 len 15
Destination CID: 64
Flags: 0x0000
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Basic (0x00)
TX window size: 0
Max transmit: 0
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 0
> ACL Data RX: Handle 256 flags 0x02 dlen 16 #66 [hci0] 59.183948
L2CAP: Configure Request (0x04) ident 1 len 8
Destination CID: 64
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 1480
< ACL Data TX: Handle 256 flags 0x00 dlen 18 #67 [hci0] 59.183994
L2CAP: Configure Response (0x05) ident 1 len 10
Source CID: 64
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 1480
> ACL Data RX: Handle 256 flags 0x02 dlen 15 #69 [hci0] 59.187676
L2CAP: Configure Response (0x05) ident 3 len 7
Source CID: 64
Flags: 0x0000
Result: Failure - unknown options (0x0003)
04 .
< ACL Data TX: Handle 256 flags 0x00 dlen 12 #70 [hci0] 59.187722
L2CAP: Disconnection Request (0x06) ident 4 len 4
Destination CID: 64
Source CID: 64
> ACL Data RX: Handle 256 flags 0x02 dlen 12 #73 [hci0] 59.192714
L2CAP: Disconnection Response (0x07) ident 4 len 4
Destination CID: 64
Source CID: 64
btmon after patch:
> ACL Data RX: Handle 256 flags 0x02 dlen 16 #248 [hci0] 103.502970
L2CAP: Connection Response (0x03) ident 5 len 8
Destination CID: 65
Source CID: 65
Result: Connection pending (0x0001)
Status: No further information available (0x0000)
> ACL Data RX: Handle 256 flags 0x02 dlen 16 #249 [hci0] 103.504184
L2CAP: Connection Response (0x03) ident 5 len 8
Destination CID: 65
Source CID: 65
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 23 #250 [hci0] 103.504398
L2CAP: Configure Request (0x04) ident 6 len 15
Destination CID: 65
Flags: 0x0000
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Basic (0x00)
TX window size: 0
Max transmit: 0
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 0
> ACL Data RX: Handle 256 flags 0x02 dlen 16 #251 [hci0] 103.505472
L2CAP: Configure Request (0x04) ident 3 len 8
Destination CID: 65
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 1480
< ACL Data TX: Handle 256 flags 0x00 dlen 18 #252 [hci0] 103.505689
L2CAP: Configure Response (0x05) ident 3 len 10
Source CID: 65
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 1480
> ACL Data RX: Handle 256 flags 0x02 dlen 15 #254 [hci0] 103.509165
L2CAP: Configure Response (0x05) ident 6 len 7
Source CID: 65
Flags: 0x0000
Result: Failure - unknown options (0x0003)
04 .
< ACL Data TX: Handle 256 flags 0x00 dlen 12 #255 [hci0] 103.509426
L2CAP: Configure Request (0x04) ident 7 len 4
Destination CID: 65
Flags: 0x0000
< ACL Data TX: Handle 256 flags 0x00 dlen 12 #257 [hci0] 103.511870
L2CAP: Connection Request (0x02) ident 8 len 4
PSM: 1 (0x0001)
Source CID: 66
> ACL Data RX: Handle 256 flags 0x02 dlen 14 #259 [hci0] 103.514121
L2CAP: Configure Response (0x05) ident 7 len 6
Source CID: 65
Flags: 0x0000
Result: Success (0x0000)
Signed-off-by: Florian Dollinger <dollinger.florian@gmx.de>
Co-developed-by: Florian Dollinger <dollinger.florian@gmx.de>
Reviewed-by: Luiz Augusto Von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Bluetooth Core Specification v5.2, Vol. 3, Part A, section 1.4, table
1.1:
'Start Fragments always either begin with the first octet of the Basic
L2CAP header of a PDU or they have a length of zero (see [Vol 2] Part
B, Section 6.6.2).'
Apparently this was changed by the following errata:
https://www.bluetooth.org/tse/errata_view.cfm?errata_id=10216
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
kmemleak report:
unreferenced object 0xffff9b1127f00500 (size 208):
comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 60 ed 05 11 9b ff ff 00 00 00 00 00 00 00 00 .`..............
backtrace:
[<000000006ab3fd59>] kmem_cache_alloc_node+0x17a/0x480
[<0000000051a5f6f9>] __alloc_skb+0x5b/0x1d0
[<0000000037e2d252>] hci_prepare_cmd+0x32/0xc0 [bluetooth]
[<0000000010b586d5>] hci_req_add_ev+0x84/0xe0 [bluetooth]
[<00000000d2deb520>] hci_req_clear_event_filter+0x42/0x70 [bluetooth]
[<00000000f864bd8c>] hci_req_prepare_suspend+0x84/0x470 [bluetooth]
[<000000001deb2cc4>] hci_prepare_suspend+0x31/0x40 [bluetooth]
[<000000002677dd79>] process_one_work+0x209/0x3b0
[<00000000aaa62b07>] worker_thread+0x34/0x400
[<00000000826d176c>] kthread+0x126/0x140
[<000000002305e558>] ret_from_fork+0x22/0x30
unreferenced object 0xffff9b1125c6ee00 (size 512):
comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s)
hex dump (first 32 bytes):
04 00 00 00 0d 00 00 00 05 0c 01 00 11 9b ff ff ................
00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................
backtrace:
[<000000009f07c0cc>] slab_post_alloc_hook+0x59/0x270
[<0000000049431dc2>] __kmalloc_node_track_caller+0x15f/0x330
[<00000000027a42f6>] __kmalloc_reserve.isra.70+0x31/0x90
[<00000000e8e3e76a>] __alloc_skb+0x87/0x1d0
[<0000000037e2d252>] hci_prepare_cmd+0x32/0xc0 [bluetooth]
[<0000000010b586d5>] hci_req_add_ev+0x84/0xe0 [bluetooth]
[<00000000d2deb520>] hci_req_clear_event_filter+0x42/0x70 [bluetooth]
[<00000000f864bd8c>] hci_req_prepare_suspend+0x84/0x470 [bluetooth]
[<000000001deb2cc4>] hci_prepare_suspend+0x31/0x40 [bluetooth]
[<000000002677dd79>] process_one_work+0x209/0x3b0
[<00000000aaa62b07>] worker_thread+0x34/0x400
[<00000000826d176c>] kthread+0x126/0x140
[<000000002305e558>] ret_from_fork+0x22/0x30
unreferenced object 0xffff9b112b395788 (size 8):
comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s)
hex dump (first 8 bytes):
20 00 00 00 00 00 04 00 .......
backtrace:
[<0000000052dc28d2>] kmem_cache_alloc_trace+0x15e/0x460
[<0000000046147591>] alloc_ctrl_urb+0x52/0xe0 [btusb]
[<00000000a2ed3e9e>] btusb_send_frame+0x91/0x100 [btusb]
[<000000001e66030e>] hci_send_frame+0x7e/0xf0 [bluetooth]
[<00000000bf6b7269>] hci_cmd_work+0xc5/0x130 [bluetooth]
[<000000002677dd79>] process_one_work+0x209/0x3b0
[<00000000aaa62b07>] worker_thread+0x34/0x400
[<00000000826d176c>] kthread+0x126/0x140
[<000000002305e558>] ret_from_fork+0x22/0x30
In pm sleep-resume context, while the btusb device rebinds, it enters
hci_unregister_dev(), whilst there is a possibility of hdev receiving
PM_POST_SUSPEND suspend_notifier event, leading to generation of msg
frames. When hci_unregister_dev() completes, i.e. hdev context is
destroyed/freed, those intermittently sent msg frames cause memory
leak.
BUG details:
Below is stack trace of thread that enters hci_unregister_dev(), marks
the hdev flag HCI_UNREGISTER to 1, and then goes onto to wait on notifier
lock - refer unregister_pm_notifier().
hci_unregister_dev+0xa5/0x320 [bluetoot]
btusb_disconnect+0x68/0x150 [btusb]
usb_unbind_interface+0x77/0x250
? kernfs_remove_by_name_ns+0x75/0xa0
device_release_driver_internal+0xfe/0x1
device_release_driver+0x12/0x20
bus_remove_device+0xe1/0x150
device_del+0x192/0x3e0
? usb_remove_ep_devs+0x1f/0x30
usb_disable_device+0x92/0x1b0
usb_disconnect+0xc2/0x270
hub_event+0x9f6/0x15d0
? rpm_idle+0x23/0x360
? rpm_idle+0x26b/0x360
process_one_work+0x209/0x3b0
worker_thread+0x34/0x400
? process_one_work+0x3b0/0x3b0
kthread+0x126/0x140
? kthread_park+0x90/0x90
ret_from_fork+0x22/0x30
Below is stack trace of thread executing hci_suspend_notifier() which
processes the PM_POST_SUSPEND event, while the unbinding thread is
waiting on lock.
hci_suspend_notifier.cold.39+0x5/0x2b [bluetooth]
blocking_notifier_call_chain+0x69/0x90
pm_notifier_call_chain+0x1a/0x20
pm_suspend.cold.9+0x334/0x352
state_store+0x84/0xf0
kobj_attr_store+0x12/0x20
sysfs_kf_write+0x3b/0x40
kernfs_fop_write+0xda/0x1c0
vfs_write+0xbb/0x250
ksys_write+0x61/0xe0
__x64_sys_write+0x1a/0x20
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix hci_suspend_notifer(), not to act on events when flag HCI_UNREGISTER
is set.
Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
