summaryrefslogtreecommitdiff
path: root/net/batman-adv
AgeCommit message (Collapse)AuthorFilesLines
2023-05-27batman-adv: Broken sync while rescheduling delayed workVladislav Efanov1-1/+1
Syzkaller got a lot of crashes like: KASAN: use-after-free Write in *_timers* All of these crashes point to the same memory area: The buggy address belongs to the object at ffff88801f870000 which belongs to the cache kmalloc-8k of size 8192 The buggy address is located 5320 bytes inside of 8192-byte region [ffff88801f870000, ffff88801f872000) This area belongs to : batadv_priv->batadv_priv_dat->delayed_work->timer_list The reason for these issues is the lack of synchronization. Delayed work (batadv_dat_purge) schedules new timer/work while the device is being deleted. As the result new timer/delayed work is set after cancel_delayed_work_sync() was called. So after the device is freed the timer list contains pointer to already freed memory. Found by Linux Verification Center (linuxtesting.org) with syzkaller. Cc: stable@kernel.org Fixes: 2f1dfbe18507 ("batman-adv: Distributed ARP Table - implement local storage") Signed-off-by: Vladislav Efanov <VEfanov@ispras.ru> Acked-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2023-04-23net: vlan: introduce skb_vlan_eth_hdr()Vladimir Oltean1-1/+1
Similar to skb_eth_hdr() introduced in commit 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()"), let's introduce a skb_vlan_eth_hdr() helper which can be used in TX-only code paths to get to the VLAN header based on skb->data rather than based on the skb_mac_header(skb). We also consolidate the drivers that dereference skb->data to go through this helper. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-21batman-adv: tvlv: prepare for tvlv enabled multicast packet typeLinus Lüssing10-37/+72
Prepare TVLV infrastructure for more packet types, in particular the upcoming batman-adv multicast packet type. For that swap the OGM vs. unicast-tvlv packet boolean indicator to an explicit unsigned integer packet type variable. And provide the skb to a call to batadv_tvlv_containers_process(), as later the multicast packet's TVLV handler will need to have access not only to the TVLV but the full skb for forwarding. Forwarding will be invoked from the multicast packet's TVLVs' contents later. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2023-01-21batman-adv: mcast: remove now redundant single ucast forwardingLinus Lüssing3-280/+33
The multicast code to send a multicast packet via multiple batman-adv unicast packets is not only capable of sending to multiple but also to a single node. Therefore we can safely remove the old, specialized, now redundant multicast-to-single-unicast code. The only functional change of this simplification is that the edge case of allowing a multicast packet with an unsnoopable destination address (224.0.0.0/24 or ff02::1) where only a single node has signaled interest in it via the batman-adv want-all-unsnoopables multicast flag is now transmitted via a batman-adv broadcast instead of a batman-adv unicast packet. Maintaining this edge case feature does not seem worth the extra lines of code and people should just not expect to be able to snoop and optimize such unsnoopable multicast addresses when bridges are involved. While at it also renaming a few items in the batadv_forw_mode enum to prepare for the new batman-adv multicast packet type. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2023-01-06batman-adv: Drop prandom.h includesSven Eckelmann4-4/+1
The commit 8032bf1233a7 ("treewide: use get_random_u32_below() instead of deprecated function") replaced the prandom.h function prandom_u32_max with the random.h function get_random_u32_below. There is no need to still include prandom.h. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2023-01-06batman-adv: Start new development cycleSimon Wunderlich1-1/+1
This version will contain all the (major or even only minor) changes for Linux 6.3. The version number isn't a semantic version number with major and minor information. It is just encoding the year of the expected publishing as Linux -rc1 and the number of published versions this year (starting at 0). Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-12-14Merge tag 'net-next-6.2' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations - Add inet drop monitor support - A few GRO performance improvements - Add infrastructure for atomic dev stats, addressing long standing data races - De-duplicate common code between OVS and conntrack offloading infrastructure - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs - Add the helper support for connection-tracking OVS offload BPF: - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF - Make cgroup local storage available to non-cgroup attached BPF programs - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers - A relevant bunch of BPF verifier fixes and improvements - Veristat tool improvements to support custom filtering, sorting, and replay of results - Add LLVM disassembler as default library for dumping JITed code - Lots of new BPF documentation for various BPF maps - Add bpf_rcu_read_{,un}lock() support for sleepable programs - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs - Add support storing struct task_struct objects as kptrs in maps - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions Protocols: - TCP: implement Protective Load Balancing across switch links - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path - UDP: Introduce optional per-netns hash lookup table - IPv6: simplify and cleanup sockets disposal - Netlink: support different type policies for each generic netlink operation - MPTCP: add MSG_FASTOPEN and FastOpen listener side support - MPTCP: add netlink notification support for listener sockets events - SCTP: add VRF support, allowing sctp sockets binding to VRF devices - Add bridging MAC Authentication Bypass (MAB) support - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading - IPSec: extended ack support for more descriptive XFRM error reporting - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks - Tun: bump the link speed from 10Mbps to 10Gbps - Tun/VirtioNet: implement UDP segmentation offload support Driver API: - PHY/SFP: improve power level switching between standard level 1 and the higher power levels - New API for netdev <-> devlink_port linkage - PTP: convert existing drivers to new frequency adjustment implementation - DSA: add support for rx offloading - Autoload DSA tagging driver when dynamically changing protocol - Add new PCP and APPTRUST attributes to Data Center Bridging - Add configuration support for 800Gbps link speed - Add devlink port function attribute to enable/disable RoCE and migratable - Extend devlink-rate to support strict prioriry and weighted fair queuing - Add devlink support to directly reading from region memory - New device tree helper to fetch MAC address from nvmem - New big TCP helper to simplify temporary header stripping New hardware / drivers: - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter - PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S - PTP: - Orolia ART-CARD - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device Drivers: - CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support - RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support" * tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ...
2022-11-18treewide: use get_random_u32_below() instead of deprecated functionJason A. Donenfeld4-6/+6
This is a simple mechanical transformation done by: @@ expression E; @@ - prandom_u32_max + get_random_u32_below (E) Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Reviewed-by: SeongJae Park <sj@kernel.org> # for damon Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-11-07genetlink: introduce split op representationJakub Kicinski1-2/+4
We currently have two forms of operations - small ops and "full" ops (or just ops). The former does not have pointers for some of the less commonly used features (namely dump start/done and policy). The "full" ops, however, still don't contain all the necessary information. In particular the policy is per command ID, while do and dump often accept different attributes. It's also not possible to define different pre_doit and post_doit callbacks for different commands within the family. At the same time a lot of commands do not support dumping and therefore all the dump-related information is wasted space. Create a new command representation which can hold info about a do implementation or a dump implementation, but not both at the same time. Use this new representation on the command execution path (genl_family_rcv_msg) as we either run a do or a dump and don't have to create a "full" op there. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+4
drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20Merge tag 'batadv-next-pullrequest-20220916' of ↵Jakub Kicinski4-43/+1
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - drop unused headers in trace.h, by Sven Eckelmann - drop initialization of flexible ethtool_link_ksettings, by Sven Eckelmann - remove unused struct definitions, by Marek Lindner * tag 'batadv-next-pullrequest-20220916' of git://git.open-mesh.org/linux-merge: batman-adv: remove unused struct definitions batman-adv: Drop initialization of flexible ethtool_link_ksettings batman-adv: Drop unused headers in trace.h batman-adv: Start new development cycle ==================== Link: https://lore.kernel.org/r/20220916161454.1413154-1-sw@simonwunderlich.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15batman-adv: remove unused struct definitionsMarek Lindner1-39/+0
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-08-29genetlink: start to validate reserved header bytesJakub Kicinski1-0/+1
We had historically not checked that genlmsghdr.reserved is 0 on input which prevents us from using those precious bytes in the future. One use case would be to extend the cmd field, which is currently just 8 bits wide and 256 is not a lot of commands for some core families. To make sure that new families do the right thing by default put the onus of opting out of validation on existing families. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Paul Moore <paul@paul-moore.com> (NetLabel) Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-20batman-adv: Fix hang up with small MTU hard-interfaceShigeru Yoshida1-0/+4
The system hangs up when batman-adv soft-interface is created on hard-interface with small MTU. For example, the following commands create batman-adv soft-interface on dummy interface with zero MTU: # ip link add name dummy0 type dummy # ip link set mtu 0 dev dummy0 # ip link set up dev dummy0 # ip link add name bat0 type batadv # ip link set dev dummy0 master bat0 These commands cause the system hang up with the following messages: [ 90.578925][ T6689] batman_adv: bat0: Adding interface: dummy0 [ 90.580884][ T6689] batman_adv: bat0: The MTU of interface dummy0 is too small (0) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem. [ 90.586264][ T6689] batman_adv: bat0: Interface activated: dummy0 [ 90.590061][ T6689] batman_adv: bat0: Forced to purge local tt entries to fit new maximum fragment MTU (-320) [ 90.595517][ T6689] batman_adv: bat0: Forced to purge local tt entries to fit new maximum fragment MTU (-320) [ 90.598499][ T6689] batman_adv: bat0: Forced to purge local tt entries to fit new maximum fragment MTU (-320) This patch fixes this issue by returning error when enabling hard-interface with small MTU size. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-08-20batman-adv: Drop initialization of flexible ethtool_link_ksettingsSven Eckelmann1-1/+0
The commit 94dfc73e7cf4 ("treewide: uapi: Replace zero-length arrays with flexible-array members") changed various structures from using 0-length arrays to flexible arrays net/batman-adv/bat_v_elp.c: note: in included file: ./include/linux/ethtool.h:148:38: warning: nested flexible array net/batman-adv/bat_v_elp.c:128:9: warning: using sizeof on a flexible structure In theory, this could be worked around by using {} as initializer for the variable on the stack. But this variable doesn't has to be initialized at all by the caller of __ethtool_get_link_ksettings - everything will be initialized by the callee when no error occurs. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-08-17batman-adv: Drop unused headers in trace.hSven Eckelmann1-2/+0
The commit 9abc291812d7 ("batman-adv: tracing: Use the new __vstring() helper") removed the usage of WARN_ON_ONCE and __dynamic_array in this file. But it was forgotten to adjust the headers accordingly (dropping the now no longer used ones). Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-08-17batman-adv: Start new development cycleSimon Wunderlich1-1/+1
This version will contain all the (major or even only minor) changes for Linux 6.1. The version number isn't a semantic version number with major and minor information. It is just encoding the year of the expected publishing as Linux -rc1 and the number of published versions this year (starting at 0). Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-07-30batman-adv: tracing: Use the new __vstring() helperSteven Rostedt (Google)1-7/+2
Instead of open coding a __dynamic_array() with a fixed length (which defeats the purpose of the dynamic array in the first place). Use the new __vstring() helper that will use a va_list and only write enough of the string into the ring buffer that is needed. Link: https://lkml.kernel.org/r/20220724191650.236b1355@rorschach.local.home Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <a@unstable.cc> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: netdev@vger.kernel.org Acked-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-05-22net: wrap the wireless pointers in struct net_device in an ifdefJakub Kicinski1-0/+2
Most protocol-specific pointers in struct net_device are under a respective ifdef. Wireless is the notable exception. Since there's a sizable number of custom-built kernels for datacenter workloads which don't build wireless it seems reasonable to ifdefy those pointers as well. While at it move IPv4 and IPv6 pointers up, those are special for obvious reasons. Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> # ieee802154 Acked-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+11
No conflicts. Build issue in drivers/net/ethernet/sfc/ptp.c 54fccfdd7c66 ("sfc: efx_default_channel_type APIs can be static") 49e6123c65da ("net: sfc: fix memory leak due to ptp channel") https://lore.kernel.org/all/20220510130556.52598fe2@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-22batman-adv: remove unnecessary type castingsYu Zhe2-8/+8
remove unnecessary void* type castings. Signed-off-by: Yu Zhe <yuzhe@nfschina.com> [sven@narfation.org: Fix missing const in batadv_choose* functions] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-04-22batman-adv: Start new development cycleSimon Wunderlich1-1/+1
This version will contain all the (major or even only minor) changes for Linux 5.19. The version number isn't a semantic version number with major and minor information. It is just encoding the year of the expected publishing as Linux -rc1 and the number of published versions this year (starting at 0). Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-04-18batman-adv: Don't skb_split skbuffs with frag_listSven Eckelmann1-0/+11
The receiving interface might have used GRO to receive more fragments than MAX_SKB_FRAGS fragments. In this case, these will not be stored in skb_shinfo(skb)->frags but merged into the frag list. batman-adv relies on the function skb_split to split packets up into multiple smaller packets which are not larger than the MTU on the outgoing interface. But this function cannot handle frag_list entries and is only operating on skb_shinfo(skb)->frags. If it is still trying to split such an skb and xmit'ing it on an interface without support for NETIF_F_FRAGLIST, then validate_xmit_skb() will try to linearize it. But this fails due to inconsistent information. And __pskb_pull_tail will trigger a BUG_ON after skb_copy_bits() returns an error. In case of entries in frag_list, just linearize the skb before operating on it with skb_split(). Reported-by: Felix Kaechele <felix@kaechele.ca> Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Sven Eckelmann <sven@narfation.org> Tested-by: Felix Kaechele <felix@kaechele.ca> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-03-07batman-adv: Use netif_rx().Sebastian Andrzej Siewior1-1/+1
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Antonio Quartulli <a@unstable.cc> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Sven Eckelmann <sven@narfation.org> Cc: b.a.t.m.a.n@lists.open-mesh.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-9/+20
net/batman-adv/hard-interface.c commit 690bb6fb64f5 ("batman-adv: Request iflink once in batadv-on-batadv check") commit 6ee3c393eeb7 ("batman-adv: Demote batadv-on-batadv skip error message") https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/ net/smc/af_smc.c commit 4d08b7b57ece ("net/smc: Fix cleanup when register ULP fails") commit 462791bbfa35 ("net/smc: add sysctl interface for SMC") https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-03Merge tag 'batadv-next-pullrequest-20220302' of ↵Jakub Kicinski17-16/+19
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - Remove redundant 'flush_workqueue()' calls, by Christophe JAILLET - Migrate to linux/container_of.h, by Sven Eckelmann - Demote batadv-on-batadv skip error message, by Sven Eckelmann * tag 'batadv-next-pullrequest-20220302' of git://git.open-mesh.org/linux-merge: batman-adv: Demote batadv-on-batadv skip error message batman-adv: Migrate to linux/container_of.h batman-adv: Remove redundant 'flush_workqueue()' calls batman-adv: Start new development cycle ==================== Link: https://lore.kernel.org/r/20220302163522.102842-1-sw@simonwunderlich.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-02batman-adv: Don't expect inter-netns unique iflink indicesSven Eckelmann1-5/+14
The ifindex doesn't have to be unique for multiple network namespaces on the same machine. $ ip netns add test1 $ ip -net test1 link add dummy1 type dummy $ ip netns add test2 $ ip -net test2 link add dummy2 type dummy $ ip -net test1 link show dev dummy1 6: dummy1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 96:81:55:1e:dd:85 brd ff:ff:ff:ff:ff:ff $ ip -net test2 link show dev dummy2 6: dummy2: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 5a:3c:af:35:07:c3 brd ff:ff:ff:ff:ff:ff But the batman-adv code to walk through the various layers of virtual interfaces uses this assumption because dev_get_iflink handles it internally and doesn't return the actual netns of the iflink. And dev_get_iflink only documents the situation where ifindex == iflink for physical devices. But only checking for dev->netdev_ops->ndo_get_iflink is also not an option because ipoib_get_iflink implements it even when it sometimes returns an iflink != ifindex and sometimes iflink == ifindex. The caller must therefore make sure itself to check both netns and iflink + ifindex for equality. Only when they are equal, a "physical" interface was detected which should stop the traversal. On the other hand, vxcan_get_iflink can also return 0 in case there was currently no valid peer. In this case, it is still necessary to stop. Fixes: b7eddd0b3950 ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface") Fixes: 5ed4a460a1d3 ("batman-adv: additional checks for virtual interfaces on top of WiFi") Reported-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-03-02batman-adv: Request iflink once in batadv_get_real_netdeviceSven Eckelmann1-4/+5
There is no need to call dev_get_iflink multiple times for the same net_device in batadv_get_real_netdevice. And since some of the ndo_get_iflink callbacks are dynamic (for example via RCUs like in vxcan_get_iflink), it could easily happen that the returned values are not stable. The pre-checks before __dev_get_by_index are then of course bogus. Fixes: 5ed4a460a1d3 ("batman-adv: additional checks for virtual interfaces on top of WiFi") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-03-02batman-adv: Request iflink once in batadv-on-batadv checkSven Eckelmann1-4/+5
There is no need to call dev_get_iflink multiple times for the same net_device in batadv_is_on_batman_iface. And since some of the .ndo_get_iflink callbacks are dynamic (for example via RCUs like in vxcan_get_iflink), it could easily happen that the returned values are not stable. The pre-checks before __dev_get_by_index are then of course bogus. Fixes: b7eddd0b3950 ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-03-02batman-adv: Demote batadv-on-batadv skip error messageSven Eckelmann1-2/+2
The error message "Cannot find parent device" was shown for users of macvtap (on batadv devices) whenever the macvtap was moved to a different netns. This happens because macvtap doesn't provide an implementation for rtnl_link_ops->get_link_net. The situation for which this message is printed is actually not an error but just a warning that the optional sanity check was skipped. So demote the message from error to warning and adjust the text to better explain what happened. Reported-by: Leonardo Mörlein <freifunk@irrelefant.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-03-02batman-adv: Migrate to linux/container_of.hSven Eckelmann16-12/+16
The commit d2a8ebbf8192 ("kernel.h: split out container_of() and typeof_member() macros") introduced a new header for the container_of related macros from (previously) linux/kernel.h. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-02-05ipv6: make mc_forwarding atomicEric Dumazet1-1/+1
This fixes minor data-races in ip6_mc_input() and batadv_mcast_mla_rtr_flags_softif_get_ipv6() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-23batman-adv: Remove redundant 'flush_workqueue()' callsChristophe JAILLET1-1/+0
'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. This was generated with coccinelle: @@ expression E; @@ - flush_workqueue(E); destroy_workqueue(E); Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-01-23batman-adv: Start new development cycleSimon Wunderlich1-1/+1
This version will contain all the (major or even only minor) changes for Linux 5.18. The version number isn't a semantic version number with major and minor information. It is just encoding the year of the expected publishing as Linux -rc1 and the number of published versions this year (starting at 0). Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-01-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-11/+21
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-02batman-adv: mcast: don't send link-local multicast to mcast routersLinus Lüssing3-11/+21
The addition of routable multicast TX handling introduced a bug/regression for packets with a link-local multicast destination: These packets would be sent to all batman-adv nodes with a multicast router and to all batman-adv nodes with an old version without multicast router detection. This even disregards the batman-adv multicast fanout setting, which can potentially lead to an unwanted, high number of unicast transmissions or even congestion. Fixing this by avoiding to send link-local multicast packets to nodes in the multicast router list. Fixes: 11d458c1cb9b ("batman-adv: mcast: apply optimizations for routable packets, too") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2021-12-10batman-adv: remove unneeded variable in batadv_nc_initMinghao Chi1-6/+2
Return status directly from function called. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2021-11-15batman-adv: allow netlink usage in unprivileged containersLinus Lüssing1-15/+15
Currently, creating a batman-adv interface in an unprivileged LXD container and attaching secondary interfaces to it with "ip" or "batctl" works fine. However all batctl debug and configuration commands fail: root@container:~# batctl originators Error received: Operation not permitted root@container:~# batctl orig_interval 1000 root@container:~# batctl orig_interval 2000 root@container:~# batctl orig_interval 1000 To fix this change the generic netlink permissions from GENL_ADMIN_PERM to GENL_UNS_ADMIN_PERM. This way a batman-adv interface is fully maintainable as root from within a user namespace, from an unprivileged container. All except one batman-adv netlink setting are per interface and do not leak information or change settings from the host system and are therefore save to retrieve or modify as root from within an unprivileged container. "batctl routing_algo" / BATADV_CMD_GET_ROUTING_ALGOS is the only exception: It provides the batman-adv kernel module wide default routing algorithm. However it is read-only from netlink and an unprivileged container is still not allowed to modify /sys/module/batman_adv/parameters/routing_algo. Instead it is advised to use the newly introduced "batctl if create routing_algo RA_NAME" / IFLA_BATADV_ALGO_NAME to set the routing algorithm on interface creation, which already works fine in an unprivileged container. Cc: Tycho Andersen <tycho@tycho.pizza> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2021-11-15batman-adv: Start new development cycleSimon Wunderlich1-1/+1
This version will contain all the (major or even only minor) changes for Linux 5.17. The version number isn't a semantic version number with major and minor information. It is just encoding the year of the expected publishing as Linux -rc1 and the number of published versions this year (starting at 0). Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2021-11-11Merge branch 'exit-cleanups-for-v5.16' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull exit cleanups from Eric Biederman: "While looking at some issues related to the exit path in the kernel I found several instances where the code is not using the existing abstractions properly. This set of changes introduces force_fatal_sig a way of sending a signal and not allowing it to be caught, and corrects the misuse of the existing abstractions that I found. A lot of the misuse of the existing abstractions are silly things such as doing something after calling a no return function, rolling BUG by hand, doing more work than necessary to terminate a kernel thread, or calling do_exit(SIGKILL) instead of calling force_sig(SIGKILL). In the review a deficiency in force_fatal_sig and force_sig_seccomp where ptrace or sigaction could prevent the delivery of the signal was found. I have added a change that adds SA_IMMUTABLE to change that makes it impossible to interrupt the delivery of those signals, and allows backporting to fix force_sig_seccomp And Arnd found an issue where a function passed to kthread_run had the wrong prototype, and after my cleanup was failing to build." * 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits) soc: ti: fix wkup_m3_rproc_boot_thread return type signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV) exit/r8188eu: Replace the macro thread_exit with a simple return 0 exit/rtl8712: Replace the macro thread_exit with a simple return 0 exit/rtl8723bs: Replace the macro thread_exit with a simple return 0 signal/x86: In emulate_vsyscall force a signal instead of calling do_exit signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails exit/syscall_user_dispatch: Send ordinary signals on failure signal: Implement force_fatal_sig exit/kthread: Have kernel threads return instead of calling do_exit signal/s390: Use force_sigsegv in default_trap_handler signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved. signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ON signal/sparc: In setup_tsb_params convert open coded BUG into BUG signal/powerpc: On swapcontext failure force SIGSEGV signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL) signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT signal/sparc32: Remove unreachable do_exit in do_sparc_fault ...
2021-10-29exit/kthread: Have kernel threads return instead of calling do_exitEric W. Biederman1-1/+1
In 2009 Oleg reworked[1] the kernel threads so that it is not necessary to call do_exit if you are not using kthread_stop(). Remove the explicit calls of do_exit and complete_and_exit (with a NULL completion) that were previously necessary. [1] 63706172f332 ("kthreads: rework kthread_stop()") Link: https://lkml.kernel.org/r/20211020174406.17889-12-ebiederm@xmission.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2021-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski4-20/+52
include/net/sock.h 7b50ecfcc6cd ("net: Rename ->stream_memory_read to ->sock_is_readable") 4c1e34c0dbff ("vsock: Enable y2038 safe timeval for timeout") drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table") e77bcdd1f639 ("octeontx2-af: Display all enabled PF VF rsrc_alloc entries.") Adjacent code addition in both cases, keep both. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-26net: batman-adv: fix error handlingPavel Skripkin4-20/+52
Syzbot reported ODEBUG warning in batadv_nc_mesh_free(). The problem was in wrong error handling in batadv_mesh_init(). Before this patch batadv_mesh_init() was calling batadv_mesh_free() in case of any batadv_*_init() calls failure. This approach may work well, when there is some kind of indicator, which can tell which parts of batadv are initialized; but there isn't any. All written above lead to cleaning up uninitialized fields. Even if we hide ODEBUG warning by initializing bat_priv->nc.work, syzbot was able to hit GPF in batadv_nc_purge_paths(), because hash pointer in still NULL. [1] To fix these bugs we can unwind batadv_*_init() calls one by one. It is good approach for 2 reasons: 1) It fixes bugs on error handling path 2) It improves the performance, since we won't call unneeded batadv_*_free() functions. So, this patch makes all batadv_*_init() clean up all allocated memory before returning with an error to no call correspoing batadv_*_free() and open-codes batadv_mesh_free() with proper order to avoid touching uninitialized fields. Link: https://lore.kernel.org/netdev/000000000000c87fbd05cef6bcb0@google.com/ [1] Reported-and-tested-by: syzbot+28b0702ada0bf7381f58@syzkaller.appspotmail.com Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Acked-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20batman-adv: use eth_hw_addr_set() instead of ether_addr_copy()Jakub Kicinski1-1/+1
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Convert batman from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20batman-adv: prepare for const netdev->dev_addrJakub Kicinski5-13/+14
netdev->dev_addr will be constant soon, make sure the qualifier is propagated thru batman-adv. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16net: make use of helper netif_is_bridge_master()Kyungrok Chung1-1/+1
Make use of netdev helper functions to improve code readability. Replace 'dev->priv_flags & IFF_EBRIDGE' with netif_is_bridge_master(dev). Signed-off-by: Kyungrok Chung <acadx0@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-04Merge tag 'kbuild-v5.15' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add -s option (strict mode) to merge_config.sh to make it fail when any symbol is redefined. - Show a warning if a different compiler is used for building external modules. - Infer --target from ARCH for CC=clang to let you cross-compile the kernel without CROSS_COMPILE. - Make the integrated assembler default (LLVM_IAS=1) for CC=clang. - Add <linux/stdarg.h> to the kernel source instead of borrowing <stdarg.h> from the compiler. - Add Nick Desaulniers as a Kbuild reviewer. - Drop stale cc-option tests. - Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG to handle symbols in inline assembly. - Show a warning if 'FORCE' is missing for if_changed rules. - Various cleanups * tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits) kbuild: redo fake deps at include/ksym/*.h kbuild: clean up objtool_args slightly modpost: get the *.mod file path more simply checkkconfigsymbols.py: Fix the '--ignore' option kbuild: merge vmlinux_link() between ARCH=um and other architectures kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh kbuild: merge vmlinux_link() between the ordinary link and Clang LTO kbuild: remove stale *.symversions kbuild: remove unused quiet_cmd_update_lto_symversions gen_compile_commands: extract compiler command from a series of commands x86: remove cc-option-yn test for -mtune= arc: replace cc-option-yn uses with cc-option s390: replace cc-option-yn uses with cc-option ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild sparc: move the install rule to arch/sparc/Makefile security: remove unneeded subdir-$(CONFIG_...) kbuild: sh: remove unused install script kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y kbuild: Switch to 'f' variants of integrated assembler flag kbuild: Shuffle blank line to improve comment meaning ...
2021-08-19isystem: ship and use stdarg.hAlexey Dobriyan1-1/+1
Ship minimal stdarg.h (1 type, 4 macros) as <linux/stdarg.h>. stdarg.h is the only userspace header commonly used in the kernel. GPL 2 version of <stdarg.h> can be extracted from http://archive.debian.org/debian/pool/main/g/gcc-4.2/gcc-4.2_4.2.4.orig.tar.gz Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-08-18batman-adv: bcast: remove remaining skb-copy callsLinus Lüssing1-2/+10
We currently have two code paths for broadcast packets: A) self-generated, via batadv_interface_tx()-> batadv_send_bcast_packet(). B) received/forwarded, via batadv_recv_bcast_packet()-> batadv_forw_bcast_packet(). For A), self-generated broadcast packets: The only modifications to the skb data is the ethernet header which is added/pushed to the skb in batadv_send_broadcast_skb()->batadv_send_skb_packet(). However before doing so, batadv_skb_head_push() is called which calls skb_cow_head() to unshare the space for the to be pushed ethernet header. So for this case, it is safe to use skb clones. For B), received/forwarded packets: The same applies as in A) for the to be forwarded packets. Only the ethernet header is added. However after (queueing for) forwarding the packet in batadv_recv_bcast_packet()->batadv_forw_bcast_packet(), a packet is additionally decapsulated and is sent up the stack through batadv_recv_bcast_packet()->batadv_interface_rx(). Protocols higher up the stack are already required to check if the packet is shared and create a copy for further modifications. When the next (protocol) layer works correctly, it cannot happen that it tries to operate on the data behind the skb clone which is still queued up for forwarding. Co-authored-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2021-08-08batman-adv: Drop NULL check before dropping referencesSven Eckelmann19-337/+169
The check if a batman-adv related object is NULL or not is now directly in the batadv_*_put functions. It is not needed anymore to perform this check outside these function: The changes were generated using a coccinelle semantic patch: @@ expression E; @@ - if (likely(E != NULL)) ( batadv_backbone_gw_put | batadv_claim_put | batadv_dat_entry_put | batadv_gw_node_put | batadv_hardif_neigh_put | batadv_hardif_put | batadv_nc_node_put | batadv_nc_path_put | batadv_neigh_ifinfo_put | batadv_neigh_node_put | batadv_orig_ifinfo_put | batadv_orig_node_put | batadv_orig_node_vlan_put | batadv_softif_vlan_put | batadv_tp_vars_put | batadv_tt_global_entry_put | batadv_tt_local_entry_put | batadv_tt_orig_list_entry_put | batadv_tt_req_node_put | batadv_tvlv_container_put | batadv_tvlv_handler_put )(E); Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>