summaryrefslogtreecommitdiff
path: root/net/batman-adv/routing.h
AgeCommit message (Collapse)AuthorFilesLines
2015-06-07batman-adv: Add required includes to all filesSven Eckelmann1-0/+10
The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: update copyright years for 2015Sven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-01-12batman-adv: update copyright years for 2014Simon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12batman-adv: add bonding againSimon Wunderlich1-1/+1
With the new interface alternating, the first hop may send packets in a round robin fashion to it's neighbors because it has multiple valid routes built by the multi interface optimization. This patch enables the feature if bonding is selected. Note that unlike the bonding implemented before, this version is much simpler and may even enable multi path routing to a certain degree. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12batman-adv: split out router from orig_nodeSimon Wunderlich1-0/+1
For the network wide multi interface optimization there are different routers for each outgoing interface (outgoing from the OGM perspective, incoming for payload traffic). To reflect this, change the router and associated data to a list of routers. While at it, rename batadv_orig_node_get_router() to batadv_orig_router_get() to follow the new naming scheme. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12batman-adv: remove bonding and interface alternatingSimon Wunderlich1-9/+0
Remove bonding and interface alternating code - it will be replaced by a new, network-wide multi interface optimization which enables both bonding and interface alternating in a better way. Keep the sysfs and find router function though, this will be needed later. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-08batman-adv: remove FSF address from GPL disclaimerAntonio Quartulli1-3/+1
As suggested by checkpatch, remove all the references to the FSF address since the kernel already has one reference in its documentation. In this way it is easier to update it in case of future changes. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-10-23batman-adv: adapt bonding to use the new API functionsAntonio Quartulli1-1/+2
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-12batman-adv: Receive fragmented packets and mergeMartin Hundebøll1-0/+2
Fragments arriving at their destination are buffered for later merge. Merged packets are passed to the main receive function as had they never been fragmented. Fragments are forwarded without merging if the MTU of the outgoing interface is smaller than the size of the merged packet. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-12batman-adv: Remove old fragmentation codeMartin Hundebøll1-2/+0
Remove the existing fragmentation code before adding the new version and delete unicast.{h,c}. batadv_unicast_send_skb() is moved to send.c and renamed to batadv_send_skb_unicast(). fragmentation entry in sysfs (bat_priv->fragmentation) is kept for use in the new fragmentation code. BATADV_UNICAST_FRAG packet type is renamed to BATADV_FRAG for use in the new fragmentation code. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09batman-adv: reorder packet typesSimon Wunderlich1-0/+2
Reordering the packet type numbers allows us to handle unicast packets in a general way - even if we don't know the specific packet type, we can still forward it. There was already code handling this for a couple of unicast packets, and this is the more generalized version to do that. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09batman-adv: remove vis functionalitySimon Wunderlich1-2/+0
This is replaced by a userspace program, we don't need this functionality to bloat the kernel. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09batman-adv: tvlv - basic infrastructureMarek Lindner1-0/+2
The goal is to provide the infrastructure for sending, receiving and parsing information 'containers' while preserving backward compatibility. TVLV (based on the commonly known Type Length Value technique) was chosen as the format for those containers. Even if a node does not know the tvlv type of a certain container it can simply skip the current container and proceed with the next. Past experience has shown features evolve over time, so a 'version' field was added right from the start to allow differentiating between feature variants - hence the name: T(ype) V(ersion) L(ength) V(alue). This patch introduces the basic TVLV infrastructure: * register / unregister tvlv containers to be sent with each OGM (on primary interfaces only) * register / unregister callback handlers to be called upon finding the corresponding tvlv type in a tvlv buffer * unicast tvlv send / receive API calls Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Spyros Gasteratos <morfeas3000@gmail.com> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-05-29batman-adv: move batadv_slide_own_bcast_window to bat_iv_ogm.cAntonio Quartulli1-1/+0
batadv_slide_own_bcast_window() is used only in bat_iv_ogm.c and it is currently touching only batman_iv specific attributes. Move it into bat_iv_ogm.c and make it static. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-01-19batman-adv: update copyright yearsAntonio Quartulli1-1/+1
Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-07-02batman-adv: Prefix types structs with batadv_Sven Eckelmann1-21/+29
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-02batman-adv: Prefix packet structs with batadv_Sven Eckelmann1-1/+1
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-21batman-adv: Reformat multiline comments to consistent styleSven Eckelmann1-3/+1
batman-adv doesn't follow the style for multiline comments that David S. Miller prefers. All comments should be reformatted to follow this consistent style to make the code slightly more readable. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-21batman-adv: Prefix routing non-static functions with batadv_Sven Eckelmann1-25/+27
batman-adv can be compiled as part of the kernel instead of an module. In that case the linker will see all non-static symbols of batman-adv and all other non-static symbols of the kernel. This could lead to symbol collisions. A prefix for the batman-adv symbols that defines their private namespace avoids such a problem. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-05-11batman-adv: register batman ogm receive function during protocol initMarek Lindner1-1/+3
The B.A.T.M.A.N. IV OGM receive function still was hard-coded although it is a routing protocol specific function. This patch takes advantage of the dynamic packet handler registration to remove the hard-coded function calls. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-11batman-adv: remove old bridge loop avoidance codeSimon Wunderlich1-1/+0
The functionality is to be replaced by an improved implementation, so first clean up. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-02-16batman-adv: Update copyright yearsSven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-09-08batman-adv: agglomerate all batman iv ogm processing functions in a single fileMarek Lindner1-7/+10
In preparation of the upcoming improved routing algorithm the code based has to be re-organized to allow choosing the routing algorithm at compile time. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-09-08batman-adv: rename all instances of batman_packet to batman_ogm_packetMarek Lindner1-1/+1
The follow-up routing code changes are going to introduce additional routing packet types which make this distinction necessary. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-06-20batman-adv: improved roaming mechanismAntonio Quartulli1-0/+1
With the current client announcement implementation, in case of roaming, an update is triggered on the new AP serving the client. At that point the new information is spread around by means of the OGM broadcasting mechanism. Until this operations is not executed, no node is able to correctly route traffic towards the client. This obviously causes packet drops and introduces a delay in the time needed by the client to recover its connections. A new packet type called ROAMING_ADVERTISEMENT is added to account this issue. This message is sent in case of roaming from the new AP serving the client to the old one and will contain the client MAC address. In this way an out-of-OGM update is immediately committed, so that the old node can update its global translation table. Traffic reaching this node will then be redirected to the correct destination utilising the fresher information. Thus reducing the packet drops and the connection recovery delay. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-06-20batman-adv: improved client announcement mechanismAntonio Quartulli1-3/+3
The client announcement mechanism informs every mesh node in the network of any connected non-mesh client, in order to find the path towards that client from any given point in the mesh. The old implementation was based on the simple idea of appending a data buffer to each OGM containing all the client MAC addresses the node is serving. All other nodes can populate their global translation tables (table which links client MAC addresses to node addresses) using this MAC address buffer and linking it to the node's address contained in the OGM. A node that wants to contact a client has to lookup the node the client is connected to and its address in the global translation table. It is easy to understand that this implementation suffers from several issues: - big overhead (each and every OGM contains the entire list of connected clients) - high latencies for client route updates due to long OGM trip time and OGM losses The new implementation addresses these issues by appending client changes (new client joined or a client left) to the OGM instead of filling it with all the client addresses each time. In this way nodes can modify their global tables by means of "updates", thus reducing the overhead within the OGMs. To keep the entire network in sync each node maintains a translation table version number (ttvn) and a translation table checksum. These values are spread with the OGM to allow all the network participants to determine whether or not they need to update their translation table information. When a translation table lookup is performed in order to send a packet to a client attached to another node, the destination's ttvn is added to the payload packet. Forwarding nodes can compare the packet's ttvn with their destination's ttvn (this node could have a fresher information than the source) and re-route the packet if necessary. This greatly reduces the packet loss of clients roaming from one AP to the next. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-30batman-adv: Add const type qualifier for pointersSven Eckelmann1-6/+6
batman-adv uses pointers which are marked as const and should not violate that type qualifier by passing it to functions which force a cast to the non-const version. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08batman-adv: rename everything from *hna* into *tt* (translation table)Antonio Quartulli1-3/+3
To be coherent, all the functions/variables/constants have been renamed to the TranslationTable style Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-03-05batman-adv: Remove unused hdr_size variable in route_unicast_packet()Linus Lüssing1-2/+1
Signed-off-by: Linus Lüssing <linus.luessing@ascom.ch> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: rename batman_if struct to hard_ifaceMarek Lindner1-10/+10
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: protect bonding with rcu locksSimon Wunderlich1-2/+4
bonding / alternating candidates need to be secured by rcu locks as well. This patch therefore converts the bonding list from a plain pointer list to a rcu securable lists and references the bonding candidates. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-02-12batman-adv: Remove duplicate types.h inclusionsLinus Lüssing1-2/+0
types.h is included by main.h, which is included at the beginning of any other c-file anyway. Therefore this commit removes those duplicate inclussions. Signed-off-by: Linus Lüssing <linus.luessing@ascom.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-01-31batman-adv: Update copyright yearsSven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-01-31batman-adv: remove unused parametersSimon Wunderlich1-2/+1
Some function parameters are obsolete now and can be removed. Reported-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2010-12-17net: Add batman-adv meshing protocolSven Eckelmann1-0/+48
B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>