summaryrefslogtreecommitdiff
path: root/net/9p
AgeCommit message (Collapse)AuthorFilesLines
2024-10-229p: fix slab cache name creation for realLinus Torvalds1-1/+3
This was attempted by using the dev_name in the slab cache name, but as Omar Sandoval pointed out, that can be an arbitrary string, eg something like "/dev/root". Which in turn trips verify_dirent_name(), which fails if a filename contains a slash. So just make it use a sequence counter, and make it an atomic_t to avoid any possible races or locking issues. Reported-and-tested-by: Omar Sandoval <osandov@fb.com> Link: https://lore.kernel.org/all/ZxafcO8KWMlXaeWE@telecaster.dhcp.thefacebook.com/ Fixes: 79efebae4afc ("9p: Avoid creating multiple slab caches with the same name") Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-10-19Merge tag '9p-for-6.12-rc4' of https://github.com/martinetd/linuxLinus Torvalds1-1/+9
Pull 9p fixes from Dominique Martinet: "Mashed-up update that I sat on too long: - fix for multiple slabs created with the same name - enable multipage folios - theorical fix to also look for opened fids by inode if none was found by dentry" [ Enabling multi-page folios should have been done during the merge window, but it's a one-liner, and the actual meat of the enablement is in netfs and already in use for other filesystems... - Linus ] * tag '9p-for-6.12-rc4' of https://github.com/martinetd/linux: 9p: Avoid creating multiple slab caches with the same name 9p: Enable multipage folios 9p: v9fs_fid_find: also lookup by inode if not found dentry
2024-10-09net/9p/usbg: Fix build errorJinjie Ruan1-0/+2
When CONFIG_NET_9P_USBG=y but CONFIG_USB_LIBCOMPOSITE=m and CONFIG_CONFIGFS_FS=m, the following build error occurs: riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `usb9pfs_free_func': trans_usbg.c:(.text+0x124): undefined reference to `usb_free_all_descriptors' riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `usb9pfs_rx_complete': trans_usbg.c:(.text+0x2d8): undefined reference to `usb_interface_id' riscv64-unknown-linux-gnu-ld: trans_usbg.c:(.text+0x2f6): undefined reference to `usb_string_id' riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `usb9pfs_func_bind': trans_usbg.c:(.text+0x31c): undefined reference to `usb_ep_autoconfig' riscv64-unknown-linux-gnu-ld: trans_usbg.c:(.text+0x336): undefined reference to `usb_ep_autoconfig' riscv64-unknown-linux-gnu-ld: trans_usbg.c:(.text+0x378): undefined reference to `usb_assign_descriptors' riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `f_usb9pfs_opts_buflen_store': trans_usbg.c:(.text+0x49e): undefined reference to `usb_put_function_instance' riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `usb9pfs_alloc_instance': trans_usbg.c:(.text+0x5fe): undefined reference to `config_group_init_type_name' riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `usb9pfs_alloc': trans_usbg.c:(.text+0x7aa): undefined reference to `config_ep_by_speed' riscv64-unknown-linux-gnu-ld: trans_usbg.c:(.text+0x7ea): undefined reference to `config_ep_by_speed' riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `usb9pfs_set_alt': trans_usbg.c:(.text+0x828): undefined reference to `alloc_ep_req' riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `usb9pfs_modexit': trans_usbg.c:(.exit.text+0x10): undefined reference to `usb_function_unregister' riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `usb9pfs_modinit': trans_usbg.c:(.init.text+0x1e): undefined reference to `usb_function_register' Select the config for NET_9P_USBG to fix it. Fixes: a3be076dc174 ("net/9p/usbg: Add new usb gadget function transport") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Tested-by: Kexy Biscuit <kexybiscuit@aosc.io> Link: https://lore.kernel.org/r/20240930081520.2371424-1-ruanjinjie@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-229p: Avoid creating multiple slab caches with the same namePedro Falcato1-1/+9
In the spirit of [1], avoid creating multiple slab caches with the same name. Instead, add the dev_name into the mix. [1]: https://lore.kernel.org/all/20240807090746.2146479-1-pedro.falcato@gmail.com/ Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com> Reported-by: syzbot+3c5d43e97993e1fa612b@syzkaller.appspotmail.com Message-ID: <20240807094725.2193423-1-pedro.falcato@gmail.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
2024-09-11net/9p/usbg: fix CONFIG_USB_GADGET dependencyArnd Bergmann1-1/+1
When USB gadget support is in a loadable module, 9pfs cannot link to it as a built-in driver: x86_64-linux-ld: vmlinux.o: in function `usb9pfs_free_func': trans_usbg.c:(.text+0x1070012): undefined reference to `usb_free_all_descriptors' x86_64-linux-ld: vmlinux.o: in function `disable_ep': trans_usbg.c:(.text+0x1070528): undefined reference to `usb_ep_disable' x86_64-linux-ld: vmlinux.o: in function `usb9pfs_func_unbind': trans_usbg.c:(.text+0x10705df): undefined reference to `usb_ep_free_request' x86_64-linux-ld: trans_usbg.c:(.text+0x107061f): undefined reference to `usb_ep_free_request' x86_64-linux-ld: vmlinux.o: in function `usb9pfs_func_bind': trans_usbg.c:(.text+0x107069f): undefined reference to `usb_interface_id' x86_64-linux-ld: trans_usbg.c:(.text+0x10706b5): undefined reference to `usb_string_id' Change the Kconfig dependency to only allow this to be enabled when it can successfully link and work. Fixes: a3be076dc174 ("net/9p/usbg: Add new usb gadget function transport") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20240909111745.248952-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03net/9p/usbg: Add new usb gadget function transportMichael Grzeschik3-0/+966
Add the new gadget function for 9pfs transport. This function is defining an simple 9pfs transport interface that consists of one in and one out endpoint. The endpoints transmit and receive the 9pfs protocol payload when mounting a 9p filesystem over usb. Tested-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20240116-ml-topic-u9p-v12-2-9a27de5160e0@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-29Merge tag '9p-for-6.10-rc2' of https://github.com/martinetd/linuxLinus Torvalds1-0/+2
Pull 9p fixes from Dominique Martinet: "Two fixes headed to stable trees: - a trace event was dumping uninitialized values - a missing lock that was thought to have exclusive access, and it turned out not to" * tag '9p-for-6.10-rc2' of https://github.com/martinetd/linux: 9p: add missing locking around taking dentry fid list net/9p: fix uninit-value in p9_client_rpc()
2024-05-23Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-1/+0
Pull virtio updates from Michael Tsirkin: "Several new features here: - virtio-net is finally supported in vduse - virtio (balloon and mem) interaction with suspend is improved - vhost-scsi now handles signals better/faster And fixes, cleanups all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits) virtio-pci: Check if is_avq is NULL virtio: delete vq in vp_find_vqs_msix() when request_irq() fails MAINTAINERS: add Eugenio Pérez as reviewer vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API vp_vdpa: don't allocate unused msix vectors sound: virtio: drop owner assignment fuse: virtio: drop owner assignment scsi: virtio: drop owner assignment rpmsg: virtio: drop owner assignment nvdimm: virtio_pmem: drop owner assignment wifi: mac80211_hwsim: drop owner assignment vsock/virtio: drop owner assignment net: 9p: virtio: drop owner assignment net: virtio: drop owner assignment net: caif: virtio: drop owner assignment misc: nsm: drop owner assignment iommu: virtio: drop owner assignment drm/virtio: drop owner assignment gpio: virtio: drop owner assignment firmware: arm_scmi: virtio: drop owner assignment ...
2024-05-22net: 9p: virtio: drop owner assignmentKrzysztof Kozlowski1-1/+0
virtio core already sets the .owner, so driver does not need to. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Message-Id: <20240331-module-owner-virtio-v2-18-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-05-21net/9p: fix uninit-value in p9_client_rpc()Nikita Zhandarovich1-0/+2
Syzbot with the help of KMSAN reported the following error: BUG: KMSAN: uninit-value in trace_9p_client_res include/trace/events/9p.h:146 [inline] BUG: KMSAN: uninit-value in p9_client_rpc+0x1314/0x1340 net/9p/client.c:754 trace_9p_client_res include/trace/events/9p.h:146 [inline] p9_client_rpc+0x1314/0x1340 net/9p/client.c:754 p9_client_create+0x1551/0x1ff0 net/9p/client.c:1031 v9fs_session_init+0x1b9/0x28e0 fs/9p/v9fs.c:410 v9fs_mount+0xe2/0x12b0 fs/9p/vfs_super.c:122 legacy_get_tree+0x114/0x290 fs/fs_context.c:662 vfs_get_tree+0xa7/0x570 fs/super.c:1797 do_new_mount+0x71f/0x15e0 fs/namespace.c:3352 path_mount+0x742/0x1f20 fs/namespace.c:3679 do_mount fs/namespace.c:3692 [inline] __do_sys_mount fs/namespace.c:3898 [inline] __se_sys_mount+0x725/0x810 fs/namespace.c:3875 __x64_sys_mount+0xe4/0x150 fs/namespace.c:3875 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: __alloc_pages+0x9d6/0xe70 mm/page_alloc.c:4598 __alloc_pages_node include/linux/gfp.h:238 [inline] alloc_pages_node include/linux/gfp.h:261 [inline] alloc_slab_page mm/slub.c:2175 [inline] allocate_slab mm/slub.c:2338 [inline] new_slab+0x2de/0x1400 mm/slub.c:2391 ___slab_alloc+0x1184/0x33d0 mm/slub.c:3525 __slab_alloc mm/slub.c:3610 [inline] __slab_alloc_node mm/slub.c:3663 [inline] slab_alloc_node mm/slub.c:3835 [inline] kmem_cache_alloc+0x6d3/0xbe0 mm/slub.c:3852 p9_tag_alloc net/9p/client.c:278 [inline] p9_client_prepare_req+0x20a/0x1770 net/9p/client.c:641 p9_client_rpc+0x27e/0x1340 net/9p/client.c:688 p9_client_create+0x1551/0x1ff0 net/9p/client.c:1031 v9fs_session_init+0x1b9/0x28e0 fs/9p/v9fs.c:410 v9fs_mount+0xe2/0x12b0 fs/9p/vfs_super.c:122 legacy_get_tree+0x114/0x290 fs/fs_context.c:662 vfs_get_tree+0xa7/0x570 fs/super.c:1797 do_new_mount+0x71f/0x15e0 fs/namespace.c:3352 path_mount+0x742/0x1f20 fs/namespace.c:3679 do_mount fs/namespace.c:3692 [inline] __do_sys_mount fs/namespace.c:3898 [inline] __se_sys_mount+0x725/0x810 fs/namespace.c:3875 __x64_sys_mount+0xe4/0x150 fs/namespace.c:3875 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 If p9_check_errors() fails early in p9_client_rpc(), req->rc.tag will not be properly initialized. However, trace_9p_client_res() ends up trying to print it out anyway before p9_client_rpc() finishes. Fix this issue by assigning default values to p9_fcall fields such as 'tag' and (just in case KMSAN unearths something new) 'id' during the tag allocation stage. Reported-and-tested-by: syzbot+ff14db38f56329ef68df@syzkaller.appspotmail.com Fixes: 348b59012e5c ("net/9p: Convert net/9p protocol dumps to tracepoints") Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com> Cc: stable@vger.kernel.org Message-ID: <20240408141039.30428-1-n.zhandarovich@fintech.ru> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
2024-05-01netfs, 9p: Implement helpers for new write codeDavid Howells2-0/+50
Implement the helpers for the new write code in 9p. There's now an optional ->prepare_write() that allows the filesystem to set the parameters for the next write, such as maximum size and maximum segment count, and an ->issue_write() that is called to initiate an (asynchronous) write operation. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: v9fs@lists.linux.dev cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-02-129p: Fix read/write debug statements to report server replyDominique Martinet1-5/+5
Previous conversion to iov missed these debug statements which would now always print the requested size instead of the actual server reply. Write also added a loop in a much older commit but we didn't report these, while reads do report each iteration -- it's more coherent to keep reporting all requests to server so move that at the same time. Fixes: 7f02464739da ("9p: convert to advancing variant of iov_iter_get_pages_alloc()") Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Message-ID: <20240109-9p-rw-trace-v1-1-327178114257@codewreck.org>
2024-02-129p/trans_fd: remove Excess kernel-doc commentRandy Dunlap1-1/+0
Remove the "@req" kernel-doc description since there is not 'req' member in the struct p9_conn. Fixes one kernel-doc warning: trans_fd.c:133: warning: Excess struct member 'req' description in 'p9_conn' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Latchesar Ionkov <lucho@ionkov.net> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: v9fs@lists.linux.dev Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Reviewed-by: Simon Horman <horms@kernel.org> Message-ID: <20240212043341.4631-1-rdunlap@infradead.org> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
2023-12-12net: 9p: avoid freeing uninit memory in p9pdu_vreadfFedor Pchelkin1-4/+13
If some of p9pdu_readf() calls inside case 'T' in p9pdu_vreadf() fails, the error path is not handled properly. *wnames or members of *wnames array may be left uninitialized and invalidly freed. Initialize *wnames to NULL in beginning of case 'T'. Initialize the first *wnames array element to NULL and nullify the failing *wnames element so that the error path freeing loop stops on the first NULL element and doesn't proceed further. Found by Linux Verification Center (linuxtesting.org). Fixes: ace51c4dd2f9 ("9p: add new protocol support code") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Message-ID: <20231206200913.16135-1-pchelkin@ispras.ru> Cc: stable@vger.kernel.org Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
2023-10-279p/net: fix possible memory leak in p9_check_errors()Hangyu Hua1-2/+4
When p9pdu_readf() is called with "s?d" attribute, it allocates a pointer that will store a string. But when p9pdu_readf() fails while handling "d" then this pointer will not be freed in p9_check_errors(). Fixes: 51a87c552dfd ("9p: rework client code to use new protocol support functions") Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com> Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Message-ID: <20231027030302.11927-1-hbh25y@gmail.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
2023-10-279p/net: xen: fix false positive printf format overflow warningDominique Martinet1-8/+7
Use the constant to make the compiler happy about this warning: net/9p/trans_xen.c: In function ‘xen_9pfs_front_changed’: net/9p/trans_xen.c:444:39: warning: ‘%d’ directive writing between 1 and 11 bytes into a region of size 8 [-Wformat-overflow=] 444 | sprintf(str, "ring-ref%d", i); | ^~ In function ‘xen_9pfs_front_init’, inlined from ‘xen_9pfs_front_changed’ at net/9p/trans_xen.c:516:8, inlined from ‘xen_9pfs_front_changed’ at net/9p/trans_xen.c:504:13: net/9p/trans_xen.c:444:30: note: directive argument in the range [-2147483644, 2147483646] 444 | sprintf(str, "ring-ref%d", i); | ^~~~~~~~~~~~ net/9p/trans_xen.c:444:17: note: ‘sprintf’ output between 10 and 20 bytes into a destination of size 16 444 | sprintf(str, "ring-ref%d", i); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ net/9p/trans_xen.c: In function ‘xen_9pfs_front_changed’: net/9p/trans_xen.c:450:45: warning: ‘%d’ directive writing between 1 and 11 bytes into a region of size 2 [-Wformat-overflow=] 450 | sprintf(str, "event-channel-%d", i); | ^~ In function ‘xen_9pfs_front_init’, inlined from ‘xen_9pfs_front_changed’ at net/9p/trans_xen.c:516:8, inlined from ‘xen_9pfs_front_changed’ at net/9p/trans_xen.c:504:13: net/9p/trans_xen.c:450:30: note: directive argument in the range [-2147483644, 2147483646] 450 | sprintf(str, "event-channel-%d", i); | ^~~~~~~~~~~~~~~~~~ net/9p/trans_xen.c:450:17: note: ‘sprintf’ output between 16 and 26 bytes into a destination of size 16 450 | sprintf(str, "event-channel-%d", i); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ There is no change in logic: there only are a constant number of rings, and there also already is a BUILD_BUG_ON that checks if that constant goes over 9 as anything bigger would no longer fit the event-channel-%d destination size. In theory having that size as part of the struct means it could be modified by another thread and makes the compiler lose track of possible values for 'i' here, using the constant directly here makes it work. Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Message-ID: <20231025103445.1248103-3-asmadeus@codewreck.org> Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
2023-10-269p: v9fs_listxattr: fix %s null argument warningDominique Martinet1-1/+1
W=1 warns about null argument to kprintf: In file included from fs/9p/xattr.c:12: In function ‘v9fs_xattr_get’, inlined from ‘v9fs_listxattr’ at fs/9p/xattr.c:142:9: include/net/9p/9p.h:55:2: error: ‘%s’ directive argument is null [-Werror=format-overflow=] 55 | _p9_debug(level, __func__, fmt, ##__VA_ARGS__) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Use an empty string instead of : - this is ok 9p-wise because p9pdu_vwritef serializes a null string and an empty string the same way (one '0' word for length) - since this degrades the print statements, add new single quotes for xattr's name delimter (Old: "file = (null)", new: "file = ''") Link: https://lore.kernel.org/r/20231008060138.517057-1-suhui@nfschina.com Suggested-by: Su Hui <suhui@nfschina.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Acked-by: Christian Schoenebeck <linux_oss@crudebyte.com> Message-ID: <20231025103445.1248103-2-asmadeus@codewreck.org>
2023-10-269p/trans_fd: Annotate data-racy writes to file::f_flagsMarco Elver1-3/+10
syzbot reported: | BUG: KCSAN: data-race in p9_fd_create / p9_fd_create | | read-write to 0xffff888130fb3d48 of 4 bytes by task 15599 on cpu 0: | p9_fd_open net/9p/trans_fd.c:842 [inline] | p9_fd_create+0x210/0x250 net/9p/trans_fd.c:1092 | p9_client_create+0x595/0xa70 net/9p/client.c:1010 | v9fs_session_init+0xf9/0xd90 fs/9p/v9fs.c:410 | v9fs_mount+0x69/0x630 fs/9p/vfs_super.c:123 | legacy_get_tree+0x74/0xd0 fs/fs_context.c:611 | vfs_get_tree+0x51/0x190 fs/super.c:1519 | do_new_mount+0x203/0x660 fs/namespace.c:3335 | path_mount+0x496/0xb30 fs/namespace.c:3662 | do_mount fs/namespace.c:3675 [inline] | __do_sys_mount fs/namespace.c:3884 [inline] | [...] | | read-write to 0xffff888130fb3d48 of 4 bytes by task 15563 on cpu 1: | p9_fd_open net/9p/trans_fd.c:842 [inline] | p9_fd_create+0x210/0x250 net/9p/trans_fd.c:1092 | p9_client_create+0x595/0xa70 net/9p/client.c:1010 | v9fs_session_init+0xf9/0xd90 fs/9p/v9fs.c:410 | v9fs_mount+0x69/0x630 fs/9p/vfs_super.c:123 | legacy_get_tree+0x74/0xd0 fs/fs_context.c:611 | vfs_get_tree+0x51/0x190 fs/super.c:1519 | do_new_mount+0x203/0x660 fs/namespace.c:3335 | path_mount+0x496/0xb30 fs/namespace.c:3662 | do_mount fs/namespace.c:3675 [inline] | __do_sys_mount fs/namespace.c:3884 [inline] | [...] | | value changed: 0x00008002 -> 0x00008802 Within p9_fd_open(), O_NONBLOCK is added to f_flags of the read and write files. This may happen concurrently if e.g. mounting process modifies the fd in another thread. Mark the plain read-modify-writes as intentional data-races, with the assumption that the result of executing the accesses concurrently will always result in the same result despite the accesses themselves not being atomic. Reported-by: syzbot+e441aeeb422763cc5511@syzkaller.appspotmail.com Signed-off-by: Marco Elver <elver@google.com> Link: https://lore.kernel.org/r/ZO38mqkS0TYUlpFp@elver.google.com Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Message-ID: <20231025103445.1248103-1-asmadeus@codewreck.org>
2023-10-249p/trans_fd: avoid sending req to a cancelled connSishuai Gong1-2/+6
When a connection is cancelled by p9_conn_cancel(), all requests on it should be cancelled---mark req->status as REQ_STATUS_ERROR. However, because a race over m->err between p9_conn_cancel() and p9_fd_request(), p9_fd_request might see the old value of m->err, think that the connection is NOT cancelled, and then add new requests to this cancelled connection. Fixing this issue by lock-protecting the check on m->err. Signed-off-by: Sishuai Gong <sishuai.system@gmail.com> Message-ID: <AA2DB53B-DFC7-4B88-9515-E4C9AFA6435D@gmail.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
2023-08-10net: annotate data-races around sock->opsEric Dumazet1-2/+2
IPV6_ADDRFORM socket option is evil, because it can change sock->ops while other threads might read it. Same issue for sk->sk_family being set to AF_INET. Adding READ_ONCE() over sock->ops reads is needed for sockets that might be impacted by IPV6_ADDRFORM. Note that mptcp_is_tcpsk() can also overwrite sock->ops. Adding annotations for all sk->sk_family reads will require more patches :/ BUG: KCSAN: data-race in ____sys_sendmsg / do_ipv6_setsockopt write to 0xffff888109f24ca0 of 8 bytes by task 4470 on cpu 0: do_ipv6_setsockopt+0x2c5e/0x2ce0 net/ipv6/ipv6_sockglue.c:491 ipv6_setsockopt+0x57/0x130 net/ipv6/ipv6_sockglue.c:1012 udpv6_setsockopt+0x95/0xa0 net/ipv6/udp.c:1690 sock_common_setsockopt+0x61/0x70 net/core/sock.c:3663 __sys_setsockopt+0x1c3/0x230 net/socket.c:2273 __do_sys_setsockopt net/socket.c:2284 [inline] __se_sys_setsockopt net/socket.c:2281 [inline] __x64_sys_setsockopt+0x66/0x80 net/socket.c:2281 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff888109f24ca0 of 8 bytes by task 4469 on cpu 1: sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0x349/0x4c0 net/socket.c:2503 ___sys_sendmsg net/socket.c:2557 [inline] __sys_sendmmsg+0x263/0x500 net/socket.c:2643 __do_sys_sendmmsg net/socket.c:2672 [inline] __se_sys_sendmmsg net/socket.c:2669 [inline] __x64_sys_sendmmsg+0x57/0x60 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0xffffffff850e32b8 -> 0xffffffff850da890 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 4469 Comm: syz-executor.1 Not tainted 6.4.0-rc5-syzkaller-00313-g4c605260bc60 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023 Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230808135809.2300241-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-209p: remove dead stores (variable set again without being read)Dominique Martinet1-34/+12
The 9p code for some reason used to initialize variables outside of the declaration, e.g. instead of just initializing the variable like this: int retval = 0 We would be doing this: int retval; retval = 0; This is perfectly fine and the compiler will just optimize dead stores anyway, but scan-build seems to think this is a problem and there are many of these warnings making the output of scan-build full of such warnings: fs/9p/vfs_inode.c:916:2: warning: Value stored to 'retval' is never read [deadcode.DeadStores] retval = 0; ^ ~ I have no strong opinion here, but if we want to regularly run scan-build we should fix these just to silence the messages. I've confirmed these all are indeed ok to remove. Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
2023-07-209p: virtio: skip incrementing unused variableDominique Martinet1-2/+2
Fix the following scan-build warning: net/9p/trans_virtio.c:504:3: warning: Value stored to 'in' is never read [deadcode.DeadStores] in += pack_sg_list_p(chan->sg, out + in, VIRTQUEUE_NUM, ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ I'm honestly not 100% sure about this one; I'm tempted to think we could (should?) just check the return value of pack_sg_list_p to skip the in_sgs++ and setting sgs[] if it didn't process anything, but I'm not sure it should ever happen so this is probably fine as is. Just removing the assignment at least makes it clear the return value isn't used, so it's an improvement in terms of readability. Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
2023-07-209p: virtio: make sure 'offs' is initialized in zc_requestDominique Martinet1-1/+1
Similarly to the previous patch: offs can be used in handle_rerrors without initializing on small payloads; in this case handle_rerrors will not use it because of the size check, but it doesn't hurt to make sure it is zero to please scan-build. This fixes the following warning: net/9p/trans_virtio.c:539:3: warning: 3rd function call argument is an uninitialized value [core.CallAndMessage] handle_rerror(req, in_hdr_len, offs, in_pages); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
2023-07-209p: virtio: fix unlikely null pointer deref in handle_rerrorDominique Martinet1-1/+1
handle_rerror can dereference the pages pointer, but it is not necessarily set for small payloads. In practice these should be filtered out by the size check, but might as well double-check explicitly. This fixes the following scan-build warnings: net/9p/trans_virtio.c:401:24: warning: Dereference of null pointer [core.NullDereference] memcpy_from_page(to, *pages++, offs, n); ^~~~~~~~ net/9p/trans_virtio.c:406:23: warning: Dereference of null pointer (loaded from variable 'pages') [core.NullDereference] memcpy_from_page(to, *pages, offs, size); ^~~~~~ Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
2023-05-06Merge tag 'net-6.4-rc1' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter. Current release - regressions: - sched: act_pedit: free pedit keys on bail from offset check Current release - new code bugs: - pds_core: - Kconfig fixes (DEBUGFS and AUXILIARY_BUS) - fix mutex double unlock in error path Previous releases - regressions: - sched: cls_api: remove block_cb from driver_list before freeing - nf_tables: fix ct untracked match breakage - eth: mtk_eth_soc: drop generic vlan rx offload - sched: flower: fix error handler on replace Previous releases - always broken: - tcp: fix skb_copy_ubufs() vs BIG TCP - ipv6: fix skb hash for some RST packets - af_packet: don't send zero-byte data in packet_sendmsg_spkt() - rxrpc: timeout handling fixes after moving client call connection to the I/O thread - ixgbe: fix panic during XDP_TX with > 64 CPUs - igc: RMW the SRRCTL register to prevent losing timestamp config - dsa: mt7530: fix corrupt frames using TRGMII on 40 MHz XTAL MT7621 - r8152: - fix flow control issue of RTL8156A - fix the poor throughput for 2.5G devices - move setting r8153b_rx_agg_chg_indicate() to fix coalescing - enable autosuspend - ncsi: clear Tx enable mode when handling a Config required AEN - octeontx2-pf: macsec: fixes for CN10KB ASIC rev Misc: - 9p: remove INET dependency" * tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop() pds_core: fix mutex double unlock in error path net/sched: flower: fix error handler on replace Revert "net/sched: flower: Fix wrong handle assignment during filter change" net/sched: flower: fix filter idr initialization net: fec: correct the counting of XDP sent frames bonding: add xdp_features support net: enetc: check the index of the SFI rather than the handle sfc: Add back mailing list virtio_net: suppress cpu stall when free_unused_bufs ice: block LAN in case of VF to VF offload net: dsa: mt7530: fix network connectivity with multiple CPU ports net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621 9p: Remove INET dependency netfilter: nf_tables: fix ct untracked match breakage af_packet: Don't send zero-byte data in packet_sendmsg_spkt(). igc: read before write to SRRCTL register pds_core: add AUXILIARY_BUS and NET_DEVLINK to Kconfig pds_core: remove CONFIG_DEBUG_FS from makefile ionic: catch failure from devlink_alloc ...
2023-05-05Merge tag '9p-6.4-for-linus' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs Pull 9p updates from Eric Van Hensbergen: "This includes a number of patches that didn't quite make the cut last merge window while we addressed some outstanding issues and review comments. It includes some new caching modes for those that only want readahead caches and reworks how we do writeback caching so we are not keeping extra references around which both causes performance problems and uses lots of additional resources on the server. It also includes a new flag to force disabling of xattrs which can also cause major performance issues, particularly if the underlying filesystem on the server doesn't support them. Finally it adds a couple of additional mount options to better support directio and enabling caches when the server doesn't support qid.version. There was one late-breaking bug report that has also been included as its own patch where I forgot to propagate an embarassing bit-logic fix to the various variations of open" * tag '9p-6.4-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: fs/9p: Fix bit operation logic error fs/9p: Rework cache modes and add new options to Documentation fs/9p: remove writeback fid and fix per-file modes fs/9p: Add new mount modes 9p: Add additional debug flags and open modes fs/9p: allow disable of xattr support on mount fs/9p: Remove unnecessary superblock flags fs/9p: Consolidate file operations and add readahead and writeback
2023-05-049p: Remove INET dependencyJason Andryuk1-0/+2
9pfs can run over assorted transports, so it doesn't have an INET dependency. Drop it and remove the includes of linux/inet.h. NET_9P_FD/trans_fd.o builds without INET or UNIX and is usable over plain file descriptors. However, tcp and unix functionality is still built and would generate runtime failures if used. Add imply INET and UNIX to NET_9P_FD, so functionality is enabled by default but can still be explicitly disabled. This allows configuring 9pfs over Xen with INET and UNIX disabled. Signed-off-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-029p/xen : Fix use after free bug in xen_9pfs_front_remove due to race conditionZheng Wang1-0/+4
In xen_9pfs_front_probe, it calls xen_9pfs_front_alloc_dataring to init priv->rings and bound &ring->work with p9_xen_response. When it calls xen_9pfs_front_event_handler to handle IRQ requests, it will finally call schedule_work to start the work. When we call xen_9pfs_front_remove to remove the driver, there may be a sequence as follows: Fix it by finishing the work before cleanup in xen_9pfs_front_free. Note that, this bug is found by static analysis, which might be false positive. CPU0 CPU1 |p9_xen_response xen_9pfs_front_remove| xen_9pfs_front_free| kfree(priv) | //free priv | |p9_tag_lookup |//use priv->client Fixes: 71ebd71921e4 ("xen/9pfs: connect to the backend") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
2023-03-279p: Add additional debug flags and open modesEric Van Hensbergen1-4/+4
Add some additional debug flags to assist with debugging cache changes. Also add some additional open modes so we can track cache state in fids more directly. Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
2023-03-01Merge tag '9p-6.3-for-linus-part1' of ↵Linus Torvalds3-22/+49
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs Pull 9p updates from Eric Van Hensbergen: - some fixes and cleanup setting up for a larger set of performance patches I've been working on - a contributed fixes relating to 9p/rdma - some contributed fixes relating to 9p/xen * tag '9p-6.3-for-linus-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: fs/9p: fix error reporting in v9fs_dir_release net/9p: fix bug in client create for .L 9p/rdma: unmap receive dma buffer in rdma_request()/post_recv() 9p/xen: fix connection sequence 9p/xen: fix version parsing fs/9p: Expand setup of writeback cache to all levels net/9p: Adjust maximum MSIZE to account for p9 header
2023-02-24net/9p: fix bug in client create for .LEric Van Hensbergen1-1/+1
We are supposed to set fid->mode to reflect the flags that were used to open the file. We were actually setting it to the creation mode which is the default perms of the file not the flags the file was opened with. Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org> Reviewed-by: Dominique Martinet <asmadeus@codewreck.org>
2023-02-249p/rdma: unmap receive dma buffer in rdma_request()/post_recv()Zhengchao Shao1-3/+12
When down_interruptible() or ib_post_send() failed in rdma_request(), receive dma buffer is not unmapped. Add unmap action to error path. Also if ib_post_recv() failed in post_recv(), dma buffer is not unmapped. Add unmap action to error path. Link: https://lkml.kernel.org/r/20230104020424.611926-1-shaozhengchao@huawei.com Fixes: fc79d4b104f0 ("9p: rdma: RDMA Transport Support for 9P") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
2023-02-249p/xen: fix connection sequenceJuergen Gross1-15/+23
Today the connection sequence of the Xen 9pfs frontend doesn't match the documented sequence. It can work reliably only for a PV 9pfs device having been added at boot time already, as the frontend is not waiting for the backend to have set its state to "XenbusStateInitWait" before reading the backend properties from Xenstore. Fix that by following the documented sequence [1] (the documentation has a bug, so the reference is for the patch fixing that). [1]: https://lore.kernel.org/xen-devel/20230130090937.31623-1-jgross@suse.com/T/#u Link: https://lkml.kernel.org/r/20230130113036.7087-3-jgross@suse.com Fixes: 868eb122739a ("xen/9pfs: introduce Xen 9pfs transport driver") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
2023-02-249p/xen: fix version parsingJuergen Gross1-2/+8
When connecting the Xen 9pfs frontend to the backend, the "versions" Xenstore entry written by the backend is parsed in a wrong way. The "versions" entry is defined to contain the versions supported by the backend separated by commas (e.g. "1,2"). Today only version "1" is defined. Unfortunately the frontend doesn't look for "1" being listed in the entry, but it is expecting the entry to have the value "1". This will result in failure as soon as the backend will support e.g. versions "1" and "2". Fix that by scanning the entry correctly. Link: https://lkml.kernel.org/r/20230130113036.7087-2-jgross@suse.com Fixes: 71ebd71921e4 ("xen/9pfs: connect to the backend") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
2023-02-24net/9p: Adjust maximum MSIZE to account for p9 headerEric Van Hensbergen1-1/+5
Add maximum p9 header size to MSIZE to make sure we can have page aligned data. Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org> Reviewed-by: Dominique Martinet <asmadeus@codewreck.org>
2023-01-13Merge tag 'for-linus-6.2-rc4-tag' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - two cleanup patches - a fix of a memory leak in the Xen pvfront driver - a fix of a locking issue in the Xen hypervisor console driver * tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvcalls: free active map buffer on pvcalls_front_free_map hvc/xen: lock console list traversal x86/xen: Remove the unused function p2m_index() xen: make remove callback of xen driver void returned
2022-12-23Merge tag '9p-for-6.2-rc1' of https://github.com/martinetd/linuxLinus Torvalds5-29/+40
Pull 9p updates from Dominique Martinet: - improve p9_check_errors to check buffer size instead of msize when possible (e.g. not zero-copy) - some more syzbot and KCSAN fixes - minor headers include cleanup * tag '9p-for-6.2-rc1' of https://github.com/martinetd/linux: 9p/client: fix data race on req->status net/9p: fix response size check in p9_check_errors() net/9p: distinguish zero-copy requests 9p/xen: do not memcpy header into req->rc 9p: set req refcount to zero to avoid uninitialized usage 9p/net: Remove unneeded idr.h #include 9p/fs: Remove unneeded idr.h #include
2022-12-20Treewide: Stop corrupting socket's task_fragBenjamin Coddington1-0/+1
Since moving to memalloc_nofs_save/restore, SUNRPC has stopped setting the GFP_NOIO flag on sk_allocation which the networking system uses to decide when it is safe to use current->task_frag. The results of this are unexpected corruption in task_frag when SUNRPC is involved in memory reclaim. The corruption can be seen in crashes, but the root cause is often difficult to ascertain as a crashing machine's stack trace will have no evidence of being near NFS or SUNRPC code. I believe this problem to be much more pervasive than reports to the community may indicate. Fix this by having kernel users of sockets that may corrupt task_frag due to reclaim set sk_use_task_frag = false. Preemptively correcting this situation for users that still set sk_allocation allows them to convert to memalloc_nofs_save/restore without the same unexpected corruptions that are sure to follow, unlikely to show up in testing, and difficult to bisect. CC: Philipp Reisner <philipp.reisner@linbit.com> CC: Lars Ellenberg <lars.ellenberg@linbit.com> CC: "Christoph Böhmwalder" <christoph.boehmwalder@linbit.com> CC: Jens Axboe <axboe@kernel.dk> CC: Josef Bacik <josef@toxicpanda.com> CC: Keith Busch <kbusch@kernel.org> CC: Christoph Hellwig <hch@lst.de> CC: Sagi Grimberg <sagi@grimberg.me> CC: Lee Duncan <lduncan@suse.com> CC: Chris Leech <cleech@redhat.com> CC: Mike Christie <michael.christie@oracle.com> CC: "James E.J. Bottomley" <jejb@linux.ibm.com> CC: "Martin K. Petersen" <martin.petersen@oracle.com> CC: Valentina Manea <valentina.manea.m@gmail.com> CC: Shuah Khan <shuah@kernel.org> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: David Howells <dhowells@redhat.com> CC: Marc Dionne <marc.dionne@auristor.com> CC: Steve French <sfrench@samba.org> CC: Christine Caulfield <ccaulfie@redhat.com> CC: David Teigland <teigland@redhat.com> CC: Mark Fasheh <mark@fasheh.com> CC: Joel Becker <jlbec@evilplan.org> CC: Joseph Qi <joseph.qi@linux.alibaba.com> CC: Eric Van Hensbergen <ericvh@gmail.com> CC: Latchesar Ionkov <lucho@ionkov.net> CC: Dominique Martinet <asmadeus@codewreck.org> CC: Ilya Dryomov <idryomov@gmail.com> CC: Xiubo Li <xiubli@redhat.com> CC: Chuck Lever <chuck.lever@oracle.com> CC: Jeff Layton <jlayton@kernel.org> CC: Trond Myklebust <trond.myklebust@hammerspace.com> CC: Anna Schumaker <anna@kernel.org> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Herbert Xu <herbert@gondor.apana.org.au> Suggested-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-15xen: make remove callback of xen driver void returnedDawei Li1-2/+1
Since commit fc7a6209d571 ("bus: Make remove callback return void") forces bus_type::remove be void-returned, it doesn't make much sense for any bus based driver implementing remove callbalk to return non-void to its caller. This change is for xen bus based drivers. Acked-by: Juergen Gross <jgross@suse.com> Signed-off-by: Dawei Li <set_pte_at@outlook.com> Link: https://lore.kernel.org/r/TYCP286MB23238119AB4DF190997075C9CAE39@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM Signed-off-by: Juergen Gross <jgross@suse.com>
2022-12-139p/client: fix data race on req->statusDominique Martinet5-21/+23
KCSAN reported a race between writing req->status in p9_client_cb and accessing it in p9_client_rpc's wait_event. Accesses to req itself is protected by the data barrier (writing req fields, write barrier, writing status // reading status, read barrier, reading other req fields), but status accesses themselves apparently also must be annotated properly with WRITE_ONCE/READ_ONCE when we access it without locks. Follows: - error paths writing status in various threads all can notify p9_client_rpc, so these all also need WRITE_ONCE - there's a similar read loop in trans_virtio for zc case that also needs READ_ONCE - other reads in trans_fd should be protected by the trans_fd lock and lists state machine, as corresponding writers all are within trans_fd and should be under the same lock. If KCSAN complains on them we likely will have something else to fix as well, so it's better to leave them unmarked and look again if required. Link: https://lkml.kernel.org/r/20221205124756.426350-1-asmadeus@codewreck.org Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Suggested-by: Marco Elver <elver@google.com> Acked-by: Marco Elver <elver@google.com> Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
2022-12-13Merge tag 'pull-iov_iter' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull iov_iter updates from Al Viro: "iov_iter work; most of that is about getting rid of direction misannotations and (hopefully) preventing more of the same for the future" * tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: use less confusing names for iov_iter direction initializers iov_iter: saner checks for attempt to copy to/from iterator [xen] fix "direction" argument of iov_iter_kvec() [vhost] fix 'direction' argument of iov_iter_{init,bvec}() [target] fix iov_iter_bvec() "direction" argument [s390] memcpy_real(): WRITE is "data source", not destination... [s390] zcore: WRITE is "data source", not destination... [infiniband] READ is "data destination", not source... [fsi] WRITE is "data source", not destination... [s390] copy_oldmem_kernel() - WRITE is "data source", not destination csum_and_copy_to_iter(): handle ITER_DISCARD get rid of unlikely() on page_copy_sane() calls
2022-12-06net/9p: fix response size check in p9_check_errors()Christian Schoenebeck1-4/+3
Since commit 60ece0833b6c ("net/9p: allocate appropriate reduced message buffers") it is no longer appropriate to check server's response size against msize. Check against the previously allocated buffer capacity instead. - Omit this size check entirely for zero-copy messages, as those always allocate 4k (P9_ZC_HDR_SZ) linear buffers which are not used for actual payload and can be much bigger than 4k. - Replace p9_debug() by pr_err() to make sure this message is always printed in case this error is triggered. - Add 9p message type to error message to ease investigation. Link: https://lkml.kernel.org/r/e0edec84b1c80119ae937ce854b4f5f6dbe2d08c.1669144861.git.linux_oss@crudebyte.com Signed-off-by: Christian Schoenebeck <linux_oss@crudebyte.com> Tested-by: Stefano Stabellini <sstabellini@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
2022-12-06net/9p: distinguish zero-copy requestsChristian Schoenebeck1-0/+6
Add boolean `zc` member to struct p9_fcall to distinguish zero-copy messages (not using the linear `sdata` buffer for message payload) from regular messages (which do copy message payload to `sdata` before being further processed). This new member is appended to end of structure to avoid inserting huge padding in generated layout. Link: https://lkml.kernel.org/r/8f2a5c12a446c3b544da64e0b1550e1fb2d6f972.1669144861.git.linux_oss@crudebyte.com Signed-off-by: Christian Schoenebeck <linux_oss@crudebyte.com> Tested-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
2022-12-029p/xen: do not memcpy header into req->rcDominique Martinet1-1/+3
while 'h' is packed and can be assumed to match the request payload, req->rc is a struct p9_fcall which is not packed and that memcpy could be wrong. Fix this by copying each fields individually instead. Reported-by: Christian Schoenebeck <linux_oss@crudebyte.com> Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com> Suggested-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lkml.kernel.org/r/alpine.DEB.2.22.394.2211211454540.1049131@ubuntu-linux-20-04-desktop Link: https://lkml.kernel.org/r/20221122001025.119121-1-asmadeus@codewreck.org Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
2022-12-029p: set req refcount to zero to avoid uninitialized usageSchspa Shi1-0/+5
When a new request is allocated, the refcount will be zero if it is reused, but if the request is newly allocated from slab, it is not fully initialized before being added to idr. If the p9_read_work got a response before the refcount initiated. It will use a uninitialized req, which will result in a bad request data struct. Here is the logs from syzbot. Corrupted memory at 0xffff88807eade00b [ 0xff 0x07 0x00 0x00 0x00 0x00 0x00 0x00 . . . . . . . . ] (in kfence-#110): p9_fcall_fini net/9p/client.c:248 [inline] p9_req_put net/9p/client.c:396 [inline] p9_req_put+0x208/0x250 net/9p/client.c:390 p9_client_walk+0x247/0x540 net/9p/client.c:1165 clone_fid fs/9p/fid.h:21 [inline] v9fs_fid_xattr_set+0xe4/0x2b0 fs/9p/xattr.c:118 v9fs_xattr_set fs/9p/xattr.c:100 [inline] v9fs_xattr_handler_set+0x6f/0x120 fs/9p/xattr.c:159 __vfs_setxattr+0x119/0x180 fs/xattr.c:182 __vfs_setxattr_noperm+0x129/0x5f0 fs/xattr.c:216 __vfs_setxattr_locked+0x1d3/0x260 fs/xattr.c:277 vfs_setxattr+0x143/0x340 fs/xattr.c:309 setxattr+0x146/0x160 fs/xattr.c:617 path_setxattr+0x197/0x1c0 fs/xattr.c:636 __do_sys_setxattr fs/xattr.c:652 [inline] __se_sys_setxattr fs/xattr.c:648 [inline] __ia32_sys_setxattr+0xc0/0x160 fs/xattr.c:648 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 entry_SYSENTER_compat_after_hwframe+0x70/0x82 Below is a similar scenario, the scenario in the syzbot log looks more complicated than this one, but this patch can fix it. T21124 p9_read_work ======================== second trans ================================= p9_client_walk p9_client_rpc p9_client_prepare_req p9_tag_alloc req = kmem_cache_alloc(p9_req_cache, GFP_NOFS); tag = idr_alloc << preempted >> req->tc.tag = tag; /* req->[refcount/tag] == uninitialized */ m->rreq = p9_tag_lookup(m->client, m->rc.tag); /* increments uninitalized refcount */ refcount_set(&req->refcount, 2); /* cb drops one ref */ p9_client_cb(req) /* reader thread drops its ref: request is incorrectly freed */ p9_req_put(req) /* use after free and ref underflow */ p9_req_put(req) To fix it, we can initialize the refcount to zero before add to idr. Link: https://lkml.kernel.org/r/20221201033310.18589-1-schspa@gmail.com Cc: stable@vger.kernel.org # 6.0+ due to 6cda12864cb0 ("9p: Drop kref usage") Fixes: 728356dedeff ("9p: Add refcount to p9_req_t") Reported-by: syzbot+8f1060e2aaf8ca55220b@syzkaller.appspotmail.com Signed-off-by: Schspa Shi <schspa@gmail.com> Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
2022-12-029p/net: Remove unneeded idr.h #includeChristophe JAILLET3-3/+0
The 9p net files don't use IDR or IDA functionalities. So there is no point in including <linux/idr.h>. Remove it. Link: https://lkml.kernel.org/r/9e386018601d7e4a9e5d7da8fc3e9555ebb25c87.1669560387.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
2022-11-29Merge tag 'net-6.1-rc8-2' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, can and wifi. Current release - new code bugs: - eth: mlx5e: - use kvfree() in mlx5e_accel_fs_tcp_create() - MACsec, fix RX data path 16 RX security channel limit - MACsec, fix memory leak when MACsec device is deleted - MACsec, fix update Rx secure channel active field - MACsec, fix add Rx security association (SA) rule memory leak Previous releases - regressions: - wifi: cfg80211: don't allow multi-BSSID in S1G - stmmac: set MAC's flow control register to reflect current settings - eth: mlx5: - E-switch, fix duplicate lag creation - fix use-after-free when reverting termination table Previous releases - always broken: - ipv4: fix route deletion when nexthop info is not specified - bpf: fix a local storage BPF map bug where the value's spin lock field can get initialized incorrectly - tipc: re-fetch skb cb after tipc_msg_validate - wifi: wilc1000: fix Information Element parsing - packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE - sctp: fix memory leak in sctp_stream_outq_migrate() - can: can327: fix potential skb leak when netdev is down - can: add number of missing netdev freeing on error paths - aquantia: do not purge addresses when setting the number of rings - wwan: iosm: - fix incorrect skb length leading to truncated packet - fix crash in peek throughput test due to skb UAF" * tag 'net-6.1-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits) net: ethernet: renesas: ravb: Fix promiscuous mode after system resumed MAINTAINERS: Update maintainer list for chelsio drivers ionic: update MAINTAINERS entry sctp: fix memory leak in sctp_stream_outq_migrate() packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE net/mlx5: Lag, Fix for loop when checking lag Revert "net/mlx5e: MACsec, remove replay window size limitation in offload path" net: marvell: prestera: Fix a NULL vs IS_ERR() check in some functions net: tun: Fix use-after-free in tun_detach() net: mdiobus: fix unbalanced node reference count net: hsr: Fix potential use-after-free tipc: re-fetch skb cb after tipc_msg_validate mptcp: fix sleep in atomic at close time mptcp: don't orphan ssk in mptcp_close() dsa: lan9303: Correct stat name ipv4: Fix route deletion when nexthop info is not specified net: wwan: iosm: fix incorrect skb length net: wwan: iosm: fix crash in peek throughput test net: wwan: iosm: fix dma_alloc_coherent incompatible pointer type net: wwan: iosm: fix kernel test robot reported error ...
2022-11-28net/9p: Fix a potential socket leak in p9_socket_openWang Hai1-1/+3
Both p9_fd_create_tcp() and p9_fd_create_unix() will call p9_socket_open(). If the creation of p9_trans_fd fails, p9_fd_create_tcp() and p9_fd_create_unix() will return an error directly instead of releasing the cscoket, which will result in a socket leak. This patch adds sock_release() to fix the leak issue. Fixes: 6b18662e239a ("9p connect fixes") Signed-off-by: Wang Hai <wanghai38@huawei.com> ACKed-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-25use less confusing names for iov_iter direction initializersAl Viro1-1/+1
READ/WRITE proved to be actively confusing - the meanings are "data destination, as used with read(2)" and "data source, as used with write(2)", but people keep interpreting those as "we read data from it" and "we write data to it", i.e. exactly the wrong way. Call them ITER_DEST and ITER_SOURCE - at least that is harder to misinterpret... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-11-239p/xen: check logical size for buffer sizeDominique Martinet1-0/+9
trans_xen did not check the data fits into the buffer before copying from the xen ring, but we probably should. Add a check that just skips the request and return an error to userspace if it did not fit Tested-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com> Link: https://lkml.kernel.org/r/20221118135542.63400-1-asmadeus@codewreck.org Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-21 10:57:32 +0300