summaryrefslogtreecommitdiff
path: root/mm
AgeCommit message (Collapse)AuthorFilesLines
2021-01-05mm: make wait_on_page_writeback() wait for multiple pending writebacksLinus Torvalds1-1/+1
Ever since commit 2a9127fcf229 ("mm: rewrite wait_on_page_bit_common() logic") we've had some very occasional reports of BUG_ON(PageWriteback) in write_cache_pages(), which we thought we already fixed in commit 073861ed77b6 ("mm: fix VM_BUG_ON(PageTail) and BUG_ON(PageWriteback)"). But syzbot just reported another one, even with that commit in place. And it turns out that there's a simpler way to trigger the BUG_ON() than the one Hugh found with page re-use. It all boils down to the fact that the page writeback is ostensibly serialized by the page lock, but that isn't actually really true. Yes, the people _setting_ writeback all do so under the page lock, but the actual clearing of the bit - and waking up any waiters - happens without any page lock. This gives us this fairly simple race condition: CPU1 = end previous writeback CPU2 = start new writeback under page lock CPU3 = write_cache_pages() CPU1 CPU2 CPU3 ---- ---- ---- end_page_writeback() test_clear_page_writeback(page) ... delayed... lock_page(); set_page_writeback() unlock_page() lock_page() wait_on_page_writeback(); wake_up_page(page, PG_writeback); .. wakes up CPU3 .. BUG_ON(PageWriteback(page)); where the BUG_ON() happens because we woke up the PG_writeback bit becasue of the _previous_ writeback, but a new one had already been started because the clearing of the bit wasn't actually atomic wrt the actual wakeup or serialized by the page lock. The reason this didn't use to happen was that the old logic in waiting on a page bit would just loop if it ever saw the bit set again. The nice proper fix would probably be to get rid of the whole "wait for writeback to clear, and then set it" logic in the writeback path, and replace it with an atomic "wait-to-set" (ie the same as we have for page locking: we set the page lock bit with a single "lock_page()", not with "wait for lock bit to clear and then set it"). However, out current model for writeback is that the waiting for the writeback bit is done by the generic VFS code (ie write_cache_pages()), but the actual setting of the writeback bit is done much later by the filesystem ".writepages()" function. IOW, to make the writeback bit have that same kind of "wait-to-set" behavior as we have for page locking, we'd have to change our roughly ~50 different writeback functions. Painful. Instead, just make "wait_on_page_writeback()" loop on the very unlikely situation that the PG_writeback bit is still set, basically re-instating the old behavior. This is very non-optimal in case of contention, but since we only ever set the bit under the page lock, that situation is controlled. Reported-by: syzbot+2fc0712f8f8b8b8fa0ef@syzkaller.appspotmail.com Fixes: 2a9127fcf229 ("mm: rewrite wait_on_page_bit_common() logic") Acked-by: Hugh Dickins <hughd@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-30mm: slub: call account_slab_page() after slab page initializationRoman Gushchin1-3/+2
It's convenient to have page->objects initialized before calling into account_slab_page(). In particular, this information can be used to pre-alloc the obj_cgroup vector. Let's call account_slab_page() a bit later, after the initialization of page->objects. This commit doesn't bring any functional change, but is required for further optimizations. [akpm@linux-foundation.org: undo changes needed by forthcoming mm-memcg-slab-pre-allocate-obj_cgroups-for-slab-caches-with-slab_account.patch] Link: https://lkml.kernel.org/r/20201110195753.530157-1-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-30kasan: fix null pointer dereference in kasan_record_aux_stackWalter Wu1-0/+2
Syzbot reported the following [1]: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 2d993067 P4D 2d993067 PUD 19a3c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 3852 Comm: kworker/1:2 Not tainted 5.10.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events free_ipc RIP: 0010:kasan_record_aux_stack+0x77/0xb0 Add null checking slab object from kasan_get_alloc_meta() in order to avoid null pointer dereference. [1] https://syzkaller.appspot.com/x/log.txt?x=10a82a50d00000 Link: https://lkml.kernel.org/r/20201228080018.23041-1-walter-zh.wu@mediatek.com Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com> Suggested-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-30mm: generalise COW SMC TLB flushing race commentNicholas Piggin1-3/+5
I'm not sure if I'm completely missing something here, but AFAIKS the reference to the mysterious "COW SMC race" confuses the issue. The original changelog and mailing list thread didn't help me either. This SMC race is where the problem was detected, but isn't the general problem bigger and more obvious: that the new PTE could be picked up at any time by any TLB while entries for the old PTE exist in other TLBs before the TLB flush takes effect? The case where the iTLB and dTLB of a CPU are pointing at different pages is an interesting one but follows from the general problem. The other (minor) thing with the comment I think it makes it a bit clearer to say what the old code was doing (i.e., it avoids the race as opposed to what?). References: 4ce072f1faf29 ("mm: fix a race condition under SMC + COW") Link: https://lkml.kernel.org/r/20201215121119.351650-1-npiggin@gmail.com Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suresh Siddha <sbsiddha@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-30mm/mremap.c: fix extent calculationKalesh Singh1-1/+3
When `next < old_addr`, `next - old_addr` arithmetic underflows causing `extent` to be incorrect. Make `extent` the smaller of `next - old_addr` or `old_end - old_addr`. Link: https://lkml.kernel.org/r/20201219170433.2418867-1-kaleshsingh@google.com Fixes: c49dd34018026 ("mm: speedup mremap on 1GB or larger regions") Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Helge Deller <deller@gmx.de> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-30mm: memmap defer init doesn't work as expectedBaoquan He2-4/+6
VMware observed a performance regression during memmap init on their platform, and bisected to commit 73a6e474cb376 ("mm: memmap_init: iterate over memblock regions rather that check each PFN") causing it. Before the commit: [0.033176] Normal zone: 1445888 pages used for memmap [0.033176] Normal zone: 89391104 pages, LIFO batch:63 [0.035851] ACPI: PM-Timer IO Port: 0x448 With commit [0.026874] Normal zone: 1445888 pages used for memmap [0.026875] Normal zone: 89391104 pages, LIFO batch:63 [2.028450] ACPI: PM-Timer IO Port: 0x448 The root cause is the current memmap defer init doesn't work as expected. Before, memmap_init_zone() was used to do memmap init of one whole zone, to initialize all low zones of one numa node, but defer memmap init of the last zone in that numa node. However, since commit 73a6e474cb376, function memmap_init() is adapted to iterater over memblock regions inside one zone, then call memmap_init_zone() to do memmap init for each region. E.g, on VMware's system, the memory layout is as below, there are two memory regions in node 2. The current code will mistakenly initialize the whole 1st region [mem 0xab00000000-0xfcffffffff], then do memmap defer to iniatialize only one memmory section on the 2nd region [mem 0x10000000000-0x1033fffffff]. In fact, we only expect to see that there's only one memory section's memmap initialized. That's why more time is costed at the time. [ 0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] [ 0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] [ 0.008843] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x55ffffffff] [ 0.008844] ACPI: SRAT: Node 1 PXM 1 [mem 0x5600000000-0xaaffffffff] [ 0.008844] ACPI: SRAT: Node 2 PXM 2 [mem 0xab00000000-0xfcffffffff] [ 0.008845] ACPI: SRAT: Node 2 PXM 2 [mem 0x10000000000-0x1033fffffff] Now, let's add a parameter 'zone_end_pfn' to memmap_init_zone() to pass down the real zone end pfn so that defer_init() can use it to judge whether defer need be taken in zone wide. Link: https://lkml.kernel.org/r/20201223080811.16211-1-bhe@redhat.com Link: https://lkml.kernel.org/r/20201223080811.16211-2-bhe@redhat.com Fixes: commit 73a6e474cb376 ("mm: memmap_init: iterate over memblock regions rather that check each PFN") Signed-off-by: Baoquan He <bhe@redhat.com> Reported-by: Rahul Gopakumar <gopakumarr@vmware.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: David Hildenbrand <david@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-30mm/hugetlb: fix deadlock in hugetlb_cow error pathMike Kravetz1-1/+21
syzbot reported the deadlock here [1]. The issue is in hugetlb cow error handling when there are not enough huge pages for the faulting task which took the original reservation. It is possible that other (child) tasks could have consumed pages associated with the reservation. In this case, we want the task which took the original reservation to succeed. So, we unmap any associated pages in children so that they can be used by the faulting task that owns the reservation. The unmapping code needs to hold i_mmap_rwsem in write mode. However, due to commit c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization") we are already holding i_mmap_rwsem in read mode when hugetlb_cow is called. Technically, i_mmap_rwsem does not need to be held in read mode for COW mappings as they can not share pmd's. Modifying the fault code to not take i_mmap_rwsem in read mode for COW (and other non-sharable) mappings is too involved for a stable fix. Instead, we simply drop the hugetlb_fault_mutex and i_mmap_rwsem before unmapping. This is OK as it is technically not needed. They are reacquired after unmapping as expected by calling code. Since this is done in an uncommon error path, the overhead of dropping and reacquiring mutexes is acceptable. While making changes, remove redundant BUG_ON after unmap_ref_private. [1] https://lkml.kernel.org/r/000000000000b73ccc05b5cf8558@google.com Link: https://lkml.kernel.org/r/4c5781b8-3b00-761e-c0c7-c5edebb6ec1a@oracle.com Fixes: c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reported-by: syzbot+5eee4145df3c15e96625@syzkaller.appspotmail.com Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-24Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-16/+89
Pull virtio updates from Michael Tsirkin: - vdpa sim refactoring - virtio mem: Big Block Mode support - misc cleanus, fixes * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (61 commits) vdpa: Use simpler version of ida allocation vdpa: Add missing comment for virtqueue count uapi: virtio_ids: add missing device type IDs from OASIS spec uapi: virtio_ids.h: consistent indentions vhost scsi: fix error return code in vhost_scsi_set_endpoint() virtio_ring: Fix two use after free bugs virtio_net: Fix error code in probe() virtio_ring: Cut and paste bugs in vring_create_virtqueue_packed() tools/virtio: add barrier for aarch64 tools/virtio: add krealloc_array tools/virtio: include asm/bug.h vdpa/mlx5: Use write memory barrier after updating CQ index vdpa: split vdpasim to core and net modules vdpa_sim: split vdpasim_virtqueue's iov field in out_iov and in_iov vdpa_sim: make vdpasim->buffer size configurable vdpa_sim: use kvmalloc to allocate vdpasim->buffer vdpa_sim: set vringh notify callback vdpa_sim: add set_config callback in vdpasim_dev_attr vdpa_sim: add get_config callback in vdpasim_dev_attr vdpa_sim: make 'config' generic and usable for any device type ...
2020-12-22kasan, mm: allow cache merging with no metadataAndrey Konovalov2-1/+13
The reason cache merging is disabled with KASAN is because KASAN puts its metadata right after the allocated object. When the merged caches have slightly different sizes, the metadata ends up in different places, which KASAN doesn't support. It might be possible to adjust the metadata allocation algorithm and make it friendly to the cache merging code. Instead this change takes a simpler approach and allows merging caches when no metadata is present. Which is the case for hardware tag-based KASAN with kasan.mode=prod. Link: https://lkml.kernel.org/r/37497e940bfd4b32c0a93a702a9ae4cf061d5392.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/Ia114847dfb2244f297d2cb82d592bf6a07455dba Co-developed-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com> Signed-off-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Marco Elver <elver@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: sanitize objects when metadata doesn't fitAndrey Konovalov8-75/+147
KASAN marks caches that are sanitized with the SLAB_KASAN cache flag. Currently if the metadata that is appended after the object (stores e.g. stack trace ids) doesn't fit into KMALLOC_MAX_SIZE (can only happen with SLAB, see the comment in the patch), KASAN turns off sanitization completely. With this change sanitization of the object data is always enabled. However the metadata is only stored when it fits. Instead of checking for SLAB_KASAN flag accross the code to find out whether the metadata is there, use cache->kasan_info.alloc/free_meta_offset. As 0 can be a valid value for free_meta_offset, introduce KASAN_NO_FREE_META as an indicator that the free metadata is missing. Without this change all sanitized KASAN objects would be put into quarantine with generic KASAN. With this change, only the objects that have metadata (i.e. when it fits) are put into quarantine, the rest is freed right away. Along the way rework __kasan_cache_create() and add claryfying comments. Link: https://lkml.kernel.org/r/aee34b87a5e4afe586c2ac6a0b32db8dc4dcc2dc.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/Icd947e2bea054cb5cfbdc6cf6652227d97032dcb Co-developed-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com> Signed-off-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: clarify comment in __kasan_kfree_largeAndrey Konovalov1-1/+1
Currently it says that the memory gets poisoned by page_alloc code. Clarify this by mentioning the specific callback that poisons the memory. Link: https://lkml.kernel.org/r/1c8380fe0332a3bcc720fe29f1e0bef2e2974416.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/I1334dffb69b87d7986fab88a1a039cc3ea764725 Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Marco Elver <elver@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: simplify assign_tag and set_tag callsAndrey Konovalov1-6/+7
set_tag() already ignores the tag for the generic mode, so just call it as is. Add a check for the generic mode to assign_tag(), and simplify its call in ____kasan_kmalloc(). Link: https://lkml.kernel.org/r/121eeab245f98555862b289d2ba9269c868fbbcf.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/I18905ca78fb4a3d60e1a34a4ca00247272480438 Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Marco Elver <elver@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: don't round_up too muchAndrey Konovalov2-6/+3
For hardware tag-based mode kasan_poison_memory() already rounds up the size. Do the same for software modes and remove round_up() from the common code. Link: https://lkml.kernel.org/r/47b232474f1f89dc072aeda0fa58daa6efade377.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/Ib397128fac6eba874008662b4964d65352db4aa4 Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Marco Elver <elver@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, mm: rename kasan_poison_kfreeAndrey Konovalov2-18/+24
Rename kasan_poison_kfree() to kasan_slab_free_mempool() as it better reflects what this annotation does. Also add a comment that explains the PageSlab() check. No functional changes. Link: https://lkml.kernel.org/r/141675fb493555e984c5dca555e9d9f768c7bbaa.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/I5026f87364e556b506ef1baee725144bb04b8810 Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, mm: check kasan_enabled in annotationsAndrey Konovalov1-28/+28
Declare the kasan_enabled static key in include/linux/kasan.h and in include/linux/mm.h and check it in all kasan annotations. This allows to avoid any slowdown caused by function calls when kasan_enabled is disabled. Link: https://lkml.kernel.org/r/9f90e3c0aa840dbb4833367c2335193299f69023.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/I2589451d3c96c97abbcbf714baabe6161c6f153e Co-developed-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com> Signed-off-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: add and integrate kasan boot parametersAndrey Konovalov4-7/+196
Hardware tag-based KASAN mode is intended to eventually be used in production as a security mitigation. Therefore there's a need for finer control over KASAN features and for an existence of a kill switch. This change adds a few boot parameters for hardware tag-based KASAN that allow to disable or otherwise control particular KASAN features. The features that can be controlled are: 1. Whether KASAN is enabled at all. 2. Whether KASAN collects and saves alloc/free stacks. 3. Whether KASAN panics on a detected bug or not. With this change a new boot parameter kasan.mode allows to choose one of three main modes: - kasan.mode=off - KASAN is disabled, no tag checks are performed - kasan.mode=prod - only essential production features are enabled - kasan.mode=full - all KASAN features are enabled The chosen mode provides default control values for the features mentioned above. However it's also possible to override the default values by providing: - kasan.stacktrace=off/on - enable alloc/free stack collection (default: on for mode=full, otherwise off) - kasan.fault=report/panic - only report tag fault or also panic (default: report) If kasan.mode parameter is not provided, it defaults to full when CONFIG_DEBUG_KERNEL is enabled, and to prod otherwise. It is essential that switching between these modes doesn't require rebuilding the kernel with different configs, as this is required by the Android GKI (Generic Kernel Image) initiative [1]. [1] https://source.android.com/devices/architecture/kernel/generic-kernel-image [andreyknvl@google.com: don't use read-only static keys] Link: https://lkml.kernel.org/r/f2ded589eba1597f7360a972226083de9afd86e2.1607537948.git.andreyknvl@google.com Link: https://lkml.kernel.org/r/cb093613879d8d8841173f090133eddeb4c35f1f.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/If7d37003875b2ed3e0935702c8015c223d6416a4 Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: inline (un)poison_range and check_invalid_freeAndrey Konovalov2-26/+31
Using (un)poison_range() or check_invalid_free() currently results in function calls. Move their definitions to mm/kasan/kasan.h and turn them into static inline functions for hardware tag-based mode to avoid unneeded function calls. Link: https://lkml.kernel.org/r/7007955b69eb31b5376a7dc1e0f4ac49138504f2.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/Ia9d8191024a12d1374675b3d27197f10193f50bb Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: open-code kasan_unpoison_slabAndrey Konovalov1-1/+1
There's the external annotation kasan_unpoison_slab() that is currently defined as static inline and uses kasan_unpoison_range(). Open-code this function in mempool.c. Otherwise with an upcoming change this function will result in an unnecessary function call. Link: https://lkml.kernel.org/r/131a6694a978a9a8b150187e539eecc8bcbf759b.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/Ia7c8b659f79209935cbaab3913bf7f082cc43a0e Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: inline random_tag for HW_TAGSAndrey Konovalov2-22/+14
Using random_tag() currently results in a function call. Move its definition to mm/kasan/kasan.h and turn it into a static inline function for hardware tag-based mode to avoid uneeded function calls. Link: https://lkml.kernel.org/r/be438471690e351e1d792e6bb432e8c03ccb15d3.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/Iac5b2faf9a912900e16cca6834d621f5d4abf427 Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: inline kasan_reset_tag for tag-based modesAndrey Konovalov8-28/+14
Using kasan_reset_tag() currently results in a function call. As it's called quite often from the allocator code, this leads to a noticeable slowdown. Move it to include/linux/kasan.h and turn it into a static inline function. Also remove the now unneeded reset_tag() internal KASAN macro and use kasan_reset_tag() instead. Link: https://lkml.kernel.org/r/6940383a3a9dfb416134d338d8fac97a9ebb8686.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/I4d2061acfe91d480a75df00b07c22d8494ef14b5 Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: remove __kasan_unpoison_stackAndrey Konovalov1-9/+3
There's no need for __kasan_unpoison_stack() helper, as it's only currently used in a single place. Removing it also removes unneeded arithmetic. No functional changes. Link: https://lkml.kernel.org/r/93e78948704a42ea92f6248ff8a725613d721161.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/Ie5ba549d445292fe629b4a96735e4034957bcc50 Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Marco Elver <elver@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, arm64: unpoison stack only with CONFIG_KASAN_STACKAndrey Konovalov1-0/+2
There's a config option CONFIG_KASAN_STACK that has to be enabled for KASAN to use stack instrumentation and perform validity checks for stack variables. There's no need to unpoison stack when CONFIG_KASAN_STACK is not enabled. Only call kasan_unpoison_task_stack[_below]() when CONFIG_KASAN_STACK is enabled. Note, that CONFIG_KASAN_STACK is an option that is currently always defined when CONFIG_KASAN is enabled, and therefore has to be tested with #if instead of #ifdef. Link: https://lkml.kernel.org/r/d09dd3f8abb388da397fd11598c5edeaa83fe559.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/If8a891e9fe01ea543e00b576852685afec0887e3 Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: introduce set_alloc_infoAndrey Konovalov1-1/+6
Add set_alloc_info() helper and move kasan_set_track() into it. This will simplify the code for one of the upcoming changes. No functional changes. Link: https://lkml.kernel.org/r/b2393e8f1e311a70fc3aaa2196461b6acdee7d21.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/I0316193cbb4ecc9b87b7c2eee0dd79f8ec908c1a Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Marco Elver <elver@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: rename get_alloc/free_infoAndrey Konovalov8-31/+31
Rename get_alloc_info() and get_free_info() to kasan_get_alloc_meta() and kasan_get_free_meta() to better reflect what those do and avoid confusion with kasan_set_free_info(). No functional changes. Link: https://lkml.kernel.org/r/27b7c036b754af15a2839e945f6d8bfce32b4c2f.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/Ib6e4ba61c8b12112b403d3479a9799ac8fff8de1 Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Marco Elver <elver@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: simplify quarantine_put call siteAndrey Konovalov3-5/+5
Patch series "kasan: boot parameters for hardware tag-based mode", v4. === Overview Hardware tag-based KASAN mode [1] is intended to eventually be used in production as a security mitigation. Therefore there's a need for finer control over KASAN features and for an existence of a kill switch. This patchset adds a few boot parameters for hardware tag-based KASAN that allow to disable or otherwise control particular KASAN features, as well as provides some initial optimizations for running KASAN in production. There's another planned patchset what will further optimize hardware tag-based KASAN, provide proper benchmarking and tests, and will fully enable tag-based KASAN for production use. Hardware tag-based KASAN relies on arm64 Memory Tagging Extension (MTE) [2] to perform memory and pointer tagging. Please see [3] and [4] for detailed analysis of how MTE helps to fight memory safety problems. The features that can be controlled are: 1. Whether KASAN is enabled at all. 2. Whether KASAN collects and saves alloc/free stacks. 3. Whether KASAN panics on a detected bug or not. The patch titled "kasan: add and integrate kasan boot parameters" of this series adds a few new boot parameters. kasan.mode allows to choose one of three main modes: - kasan.mode=off - KASAN is disabled, no tag checks are performed - kasan.mode=prod - only essential production features are enabled - kasan.mode=full - all KASAN features are enabled The chosen mode provides default control values for the features mentioned above. However it's also possible to override the default values by providing: - kasan.stacktrace=off/on - enable stacks collection (default: on for mode=full, otherwise off) - kasan.fault=report/panic - only report tag fault or also panic (default: report) If kasan.mode parameter is not provided, it defaults to full when CONFIG_DEBUG_KERNEL is enabled, and to prod otherwise. It is essential that switching between these modes doesn't require rebuilding the kernel with different configs, as this is required by the Android GKI (Generic Kernel Image) initiative. === Benchmarks For now I've only performed a few simple benchmarks such as measuring kernel boot time and slab memory usage after boot. There's an upcoming patchset which will optimize KASAN further and include more detailed benchmarking results. The benchmarks were performed in QEMU and the results below exclude the slowdown caused by QEMU memory tagging emulation (as it's different from the slowdown that will be introduced by hardware and is therefore irrelevant). KASAN_HW_TAGS=y + kasan.mode=off introduces no performance or memory impact compared to KASAN_HW_TAGS=n. kasan.mode=prod (manually excluding tagging) introduces 3% of performance and no memory impact (except memory used by hardware to store tags) compared to kasan.mode=off. kasan.mode=full has about 40% performance and 30% memory impact over kasan.mode=prod. Both come from alloc/free stack collection. === Notes This patchset is available here: https://github.com/xairy/linux/tree/up-boot-mte-v4 This patchset is based on v11 of "kasan: add hardware tag-based mode for arm64" patchset [1]. For testing in QEMU hardware tag-based KASAN requires: 1. QEMU built from master [6] (use "-machine virt,mte=on -cpu max" arguments to run). 2. GCC version 10. [1] https://lore.kernel.org/linux-arm-kernel/cover.1606161801.git.andreyknvl@google.com/T/#t [2] https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/enhancing-memory-safety [3] https://arxiv.org/pdf/1802.09517.pdf [4] https://github.com/microsoft/MSRC-Security-Research/blob/master/papers/2020/Security%20analysis%20of%20memory%20tagging.pdf [5] https://source.android.com/devices/architecture/kernel/generic-kernel-image [6] https://github.com/qemu/qemu === Tags Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> This patch (of 19): Move get_free_info() call into quarantine_put() to simplify the call site. No functional changes. Link: https://lkml.kernel.org/r/cover.1606162397.git.andreyknvl@google.com Link: https://lkml.kernel.org/r/312d0a3ef92cc6dc4fa5452cbc1714f9393ca239.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/Iab0f04e7ebf8d83247024b7190c67c3c34c7940f Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Marco Elver <elver@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, mm: reset tags when accessing metadataAndrey Konovalov3-15/+20
Kernel allocator code accesses metadata for slab objects, that may lie out-of-bounds of the object itself, or be accessed when an object is freed. Such accesses trigger tag faults and lead to false-positive reports with hardware tag-based KASAN. Software KASAN modes disable instrumentation for allocator code via KASAN_SANITIZE Makefile macro, and rely on kasan_enable/disable_current() annotations which are used to ignore KASAN reports. With hardware tag-based KASAN neither of those options are available, as it doesn't use compiler instrumetation, no tag faults are ignored, and MTE is disabled after the first one. Instead, reset tags when accessing metadata (currently only for SLUB). Link: https://lkml.kernel.org/r/a0f3cefbc49f34c843b664110842de4db28179d0.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Acked-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, arm64: print report from tag fault handlerAndrey Konovalov1-3/+8
Add error reporting for hardware tag-based KASAN. When CONFIG_KASAN_HW_TAGS is enabled, print KASAN report from the arm64 tag fault handler. SAS bits aren't set in ESR for all faults reported in EL1, so it's impossible to find out the size of the access the caused the fault. Adapt KASAN reporting code to handle this case. Link: https://lkml.kernel.org/r/b559c82b6a969afedf53b4694b475f0234067a1a.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Co-developed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, arm64: implement HW_TAGS runtimeAndrey Konovalov8-15/+152
Provide implementation of KASAN functions required for the hardware tag-based mode. Those include core functions for memory and pointer tagging (tags_hw.c) and bug reporting (report_tags_hw.c). Also adapt common KASAN code to support the new mode. Link: https://lkml.kernel.org/r/cfd0fbede579a6b66755c98c88c108e54f9c56bf.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, arm64: expand CONFIG_KASAN checksAndrey Konovalov1-5/+8
Some #ifdef CONFIG_KASAN checks are only relevant for software KASAN modes (either related to shadow memory or compiler instrumentation). Expand those into CONFIG_KASAN_GENERIC || CONFIG_KASAN_SW_TAGS. Link: https://lkml.kernel.org/r/e6971e432dbd72bb897ff14134ebb7e169bdcf0c.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: define KASAN_GRANULE_SIZE for HW_TAGSAndrey Konovalov1-0/+6
Hardware tag-based KASAN has granules of MTE_GRANULE_SIZE. Define KASAN_GRANULE_SIZE to MTE_GRANULE_SIZE for CONFIG_KASAN_HW_TAGS. Link: https://lkml.kernel.org/r/3d15794b3d1b27447fd7fdf862c073192ba657bd.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22arm64: kasan: add arch layer for memory tagging helpersAndrey Konovalov1-0/+26
This patch add a set of arch_*() memory tagging helpers currently only defined for arm64 when hardware tag-based KASAN is enabled. These helpers will be used by KASAN runtime to implement the hardware tag-based mode. The arch-level indirection level is introduced to simplify adding hardware tag-based KASAN support for other architectures in the future by defining the appropriate arch_*() macros. Link: https://lkml.kernel.org/r/fc9e5bb71201c03131a2fc00a74125723568dda9.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Co-developed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, mm: untag page address in free_reserved_areaVincenzo Frascino1-0/+5
free_reserved_area() memsets the pages belonging to a given memory area. As that memory hasn't been allocated via page_alloc, the KASAN tags that those pages have are 0x00. As the result the memset might result in a tag mismatch. Untag the address to avoid spurious faults. Link: https://lkml.kernel.org/r/ebef6425f4468d063e2f09c1b62ccbb2236b71d3.1606161801.git.andreyknvl@google.com Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: separate metadata_fetch_row for each modeAndrey Konovalov4-29/+45
This is a preparatory commit for the upcoming addition of a new hardware tag-based (MTE-based) KASAN mode. Rework print_memory_metadata() to make it agnostic with regard to the way metadata is stored. Allow providing a separate metadata_fetch_row() implementation for each KASAN mode. Hardware tag-based KASAN will provide its own implementation that doesn't use shadow memory. No functional changes for software modes. Link: https://lkml.kernel.org/r/5fb1ec0152bb1f521505017800387ec3e36ffe18.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: rename SHADOW layout macros to METAAndrey Konovalov1-15/+15
This is a preparatory commit for the upcoming addition of a new hardware tag-based (MTE-based) KASAN mode. Hardware tag-based KASAN won't be using shadow memory, but will reuse these macros. Rename "SHADOW" to implementation-neutral "META". No functional changes. Link: https://lkml.kernel.org/r/f96244ec59dc17db35173ec352c5592b14aefaf8.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: rename print_shadow_for_address to print_memory_metadataAndrey Konovalov1-3/+3
This is a preparatory commit for the upcoming addition of a new hardware tag-based (MTE-based) KASAN mode. Hardware tag-based KASAN won't be using shadow memory, but will reuse this function. Rename "shadow" to implementation-neutral "metadata". No functional changes. Link: https://lkml.kernel.org/r/dd955c5aadaee16aef451a6189d19172166a23f5.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: rename addr_has_shadow to addr_has_metadataAndrey Konovalov3-5/+5
This is a preparatory commit for the upcoming addition of a new hardware tag-based (MTE-based) KASAN mode. Hardware tag-based KASAN won't be using shadow memory, but will reuse this function. Rename "shadow" to implementation-neutral "metadata". No functional changes. Link: https://lkml.kernel.org/r/370466fba590a4596b55ffd38adfd990f8886db4.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, arm64: rename kasan_init_tags and mark as __initAndrey Konovalov1-1/+1
Rename kasan_init_tags() to kasan_init_sw_tags() as the upcoming hardware tag-based KASAN mode will have its own initialization routine. Also similarly to kasan_init() mark kasan_init_tags() as __init. Link: https://lkml.kernel.org/r/71e52af72a09f4b50c8042f16101c60e50649fbb.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, arm64: move initialization messageAndrey Konovalov2-3/+3
Software tag-based KASAN mode is fully initialized with kasan_init_tags(), while the generic mode only requires kasan_init(). Move the initialization message for tag-based mode into kasan_init_tags(). Also fix pr_fmt() usage for KASAN code: generic.c doesn't need it as it doesn't use any printing functions; tag-based mode should use "kasan:" instead of KBUILD_MODNAME (which stands for file name). Link: https://lkml.kernel.org/r/29a30ea4e1750450dd1f693d25b7b6cb05913ecf.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, arm64: only use kasan_depth for software modesAndrey Konovalov2-0/+4
This is a preparatory commit for the upcoming addition of a new hardware tag-based (MTE-based) KASAN mode. Hardware tag-based KASAN won't use kasan_depth. Only define and use it when one of the software KASAN modes are enabled. No functional changes for software modes. Link: https://lkml.kernel.org/r/e16f15aeda90bc7fb4dfc2e243a14b74cc5c8219.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: decode stack frame only with KASAN_STACK_ENABLEAndrey Konovalov3-162/+168
Decoding routines aren't needed when CONFIG_KASAN_STACK_ENABLE is not enabled. Currently only generic KASAN mode implements stack error reporting. No functional changes for software modes. Link: https://lkml.kernel.org/r/05a24db36f5ec876af876a299bbea98c29468ebd.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: hide invalid free check implementationAndrey Konovalov4-18/+19
This is a preparatory commit for the upcoming addition of a new hardware tag-based (MTE-based) KASAN mode. For software KASAN modes the check is based on the value in the shadow memory. Hardware tag-based KASAN won't be using shadow, so hide the implementation of the check in check_invalid_free(). Also simplify the code for software tag-based mode. No functional changes for software modes. Link: https://lkml.kernel.org/r/d01534a4b977f97d87515dc590e6348e1406de81.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: rename report and tags filesAndrey Konovalov5-9/+9
Rename generic_report.c to report_generic.c and tags_report.c to report_sw_tags.c, as their content is more relevant to report.c file. Also rename tags.c to sw_tags.c to better reflect that this file contains code for software tag-based mode. No functional changes. Link: https://lkml.kernel.org/r/a6105d416da97d389580015afed66c4c3cfd4c08.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: define KASAN_MEMORY_PER_SHADOW_PAGEAndrey Konovalov3-15/+13
Define KASAN_MEMORY_PER_SHADOW_PAGE as (KASAN_GRANULE_SIZE << PAGE_SHIFT), which is the same as (KASAN_GRANULE_SIZE * PAGE_SIZE) for software modes that use shadow memory, and use it across KASAN code to simplify it. Link: https://lkml.kernel.org/r/8329391cfe14b5cffd3decf3b5c535b6ce21eef6.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: split out shadow.c from common.cAndrey Konovalov3-487/+510
This is a preparatory commit for the upcoming addition of a new hardware tag-based (MTE-based) KASAN mode. The new mode won't be using shadow memory. Move all shadow-related code to shadow.c, which is only enabled for software KASAN modes that use shadow memory. No functional changes for software modes. Link: https://lkml.kernel.org/r/17d95cfa7d5cf9c4fcd9bf415f2a8dea911668df.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: only build init.c for software modesAndrey Konovalov2-4/+4
This is a preparatory commit for the upcoming addition of a new hardware tag-based (MTE-based) KASAN mode. The new mode won't be using shadow memory, so only build init.c that contains shadow initialization code for software modes. No functional changes for software modes. Link: https://lkml.kernel.org/r/bae0a6a35b7a9b1a443803c1a55e6e3fecc311c9.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: rename KASAN_SHADOW_* to KASAN_GRANULE_*Andrey Konovalov7-42/+43
This is a preparatory commit for the upcoming addition of a new hardware tag-based (MTE-based) KASAN mode. The new mode won't be using shadow memory, but will still use the concept of memory granules. Each memory granule maps to a single metadata entry: 8 bytes per one shadow byte for generic mode, 16 bytes per one shadow byte for software tag-based mode, and 16 bytes per one allocation tag for hardware tag-based mode. Rename KASAN_SHADOW_SCALE_SIZE to KASAN_GRANULE_SIZE, and KASAN_SHADOW_MASK to KASAN_GRANULE_MASK. Also use MASK when used as a mask, otherwise use SIZE. No functional changes. Link: https://lkml.kernel.org/r/939b5754e47f528a6e6a6f28ffc5815d8d128033.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: rename (un)poison_shadow to (un)poison_rangeAndrey Konovalov5-37/+42
This is a preparatory commit for the upcoming addition of a new hardware tag-based (MTE-based) KASAN mode. The new mode won't be using shadow memory. Rename external annotation kasan_unpoison_shadow() to kasan_unpoison_range(), and introduce internal functions (un)poison_range() (without kasan_ prefix). Co-developed-by: Marco Elver <elver@google.com> Link: https://lkml.kernel.org/r/fccdcaa13dc6b2211bf363d6c6d499279a54fe3a.1606161801.git.andreyknvl@google.com Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: group vmalloc codeAndrey Konovalov1-38/+40
This is a preparatory commit for the upcoming addition of a new hardware tag-based (MTE-based) KASAN mode. Group all vmalloc-related function declarations in include/linux/kasan.h, and their implementations in mm/kasan/common.c. No functional changes. Link: https://lkml.kernel.org/r/80a6fdd29b039962843bd6cf22ce2643a7c8904e.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan: drop unnecessary GPL text from comment headersAndrey Konovalov8-45/+0
Patch series "kasan: add hardware tag-based mode for arm64", v11. This patchset adds a new hardware tag-based mode to KASAN [1]. The new mode is similar to the existing software tag-based KASAN, but relies on arm64 Memory Tagging Extension (MTE) [2] to perform memory and pointer tagging (instead of shadow memory and compiler instrumentation). This patchset is co-developed and tested by Vincenzo Frascino <vincenzo.frascino@arm.com>. This patchset is available here: https://github.com/xairy/linux/tree/up-kasan-mte-v11 For testing in QEMU hardware tag-based KASAN requires: 1. QEMU built from master [4] (use "-machine virt,mte=on -cpu max" arguments to run). 2. GCC version 10. [1] https://www.kernel.org/doc/html/latest/dev-tools/kasan.html [2] https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/enhancing-memory-safety [3] git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux for-next/mte [4] https://github.com/qemu/qemu ====== Overview The underlying ideas of the approach used by hardware tag-based KASAN are: 1. By relying on the Top Byte Ignore (TBI) arm64 CPU feature, pointer tags are stored in the top byte of each kernel pointer. 2. With the Memory Tagging Extension (MTE) arm64 CPU feature, memory tags for kernel memory allocations are stored in a dedicated memory not accessible via normal instuctions. 3. On each memory allocation, a random tag is generated, embedded it into the returned pointer, and the corresponding memory is tagged with the same tag value. 4. With MTE the CPU performs a check on each memory access to make sure that the pointer tag matches the memory tag. 5. On a tag mismatch the CPU generates a tag fault, and a KASAN report is printed. Same as other KASAN modes, hardware tag-based KASAN is intended as a debugging feature at this point. ====== Rationale There are two main reasons for this new hardware tag-based mode: 1. Previously implemented software tag-based KASAN is being successfully used on dogfood testing devices due to its low memory overhead (as initially planned). The new hardware mode keeps the same low memory overhead, and is expected to have significantly lower performance impact, due to the tag checks being performed by the hardware. Therefore the new mode can be used as a better alternative in dogfood testing for hardware that supports MTE. 2. The new mode lays the groundwork for the planned in-kernel MTE-based memory corruption mitigation to be used in production. ====== Technical details Considering the implementation perspective, hardware tag-based KASAN is almost identical to the software mode. The key difference is using MTE for assigning and checking tags. Compared to the software mode, the hardware mode uses 4 bits per tag, as dictated by MTE. Pointer tags are stored in bits [56:60), the top 4 bits have the normal value 0xF. Having less distict tags increases the probablity of false negatives (from ~1/256 to ~1/16) in certain cases. Only synchronous exceptions are set up and used by hardware tag-based KASAN. ====== Benchmarks Note: all measurements have been performed with software emulation of Memory Tagging Extension, performance numbers for hardware tag-based KASAN on the actual hardware are expected to be better. Boot time [1]: * 2.8 sec for clean kernel * 5.7 sec for hardware tag-based KASAN * 11.8 sec for software tag-based KASAN * 11.6 sec for generic KASAN Slab memory usage after boot [2]: * 7.0 kb for clean kernel * 9.7 kb for hardware tag-based KASAN * 9.7 kb for software tag-based KASAN * 41.3 kb for generic KASAN Measurements have been performed with: * defconfig-based configs * Manually built QEMU master * QEMU arguments: -machine virt,mte=on -cpu max * CONFIG_KASAN_STACK_ENABLE disabled * CONFIG_KASAN_INLINE enabled * clang-10 as the compiler and gcc-10 as the assembler [1] Time before the ext4 driver is initialized. [2] Measured as `cat /proc/meminfo | grep Slab`. ====== Notes The cover letter for software tag-based KASAN patchset can be found here: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0116523cfffa62aeb5aa3b85ce7419f3dae0c1b8 ===== Tags Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> This patch (of 41): Don't mention "GNU General Public License version 2" text explicitly, as it's already covered by the SPDX-License-Identifier. Link: https://lkml.kernel.org/r/cover.1606161801.git.andreyknvl@google.com Link: https://lkml.kernel.org/r/6ea9f5f4aa9dbbffa0d0c0a780b37699a4531034.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-19Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-43/+10
Merge still more updates from Andrew Morton: "18 patches. Subsystems affected by this patch series: mm (memcg and cleanups) and epoll" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/Kconfig: fix spelling mistake "whats" -> "what's" selftests/filesystems: expand epoll with epoll_pwait2 epoll: wire up syscall epoll_pwait2 epoll: add syscall epoll_pwait2 epoll: convert internal api to timespec64 epoll: eliminate unnecessary lock for zero timeout epoll: replace gotos with a proper loop epoll: pull all code between fetch_events and send_event into the loop epoll: simplify and optimize busy loop logic epoll: move eavail next to the list_empty_careful check epoll: pull fatal signal checks into ep_send_events() epoll: simplify signal handling epoll: check for events when removing a timed out thread from the wait queue mm/memcontrol:rewrite mem_cgroup_page_lruvec() mm, kvm: account kvm_vcpu_mmap to kmemcg mm/memcg: remove unused definitions mm/memcg: warning on !memcg after readahead page charged mm/memcg: bail early from swap accounting if memcg disabled
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-16 08:48:07 +0300