| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When running as a Xen PV guests commit eed9a328aa1a ("mm: x86: add
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG") can cause a protection violation in
pmdp_test_and_clear_young():
BUG: unable to handle page fault for address: ffff8880083374d0
#PF: supervisor write access in kernel mode
#PF: error_code(0x0003) - permissions violation
PGD 3026067 P4D 3026067 PUD 3027067 PMD 7fee5067 PTE 8010000008337065
Oops: 0003 [#1] PREEMPT SMP NOPTI
CPU: 7 PID: 158 Comm: kswapd0 Not tainted 6.1.0-rc5-20221118-doflr+ #1
RIP: e030:pmdp_test_and_clear_young+0x25/0x40
This happens because the Xen hypervisor can't emulate direct writes to
page table entries other than PTEs.
This can easily be fixed by introducing arch_has_hw_nonleaf_pmd_young()
similar to arch_has_hw_pte_young() and test that instead of
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG.
Link: https://lkml.kernel.org/r/20221123064510.16225-1-jgross@suse.com
Fixes: eed9a328aa1a ("mm: x86: add CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Acked-by: Yu Zhao <yuzhao@google.com>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Acked-by: David Hildenbrand <david@redhat.com> [core changes]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
balance_dirty_pages doesn't do the required dirty throttling on cgroupv1.
See commit 9badce000e2c ("cgroup, writeback: don't enable cgroup writeback
on traditional hierarchies"). Instead, the kernel depends on writeback
throttling in shrink_folio_list to achieve the same goal. With large
memory systems, the flusher may not be able to writeback quickly enough
such that we will start finding pages in the shrink_folio_list already in
writeback. Hence for cgroupv1 let's do a reclaim throttle after waking up
the flusher.
The below test which used to fail on a 256GB system completes till the the
file system is full with this change.
root@lp2:/sys/fs/cgroup/memory# mkdir test
root@lp2:/sys/fs/cgroup/memory# cd test/
root@lp2:/sys/fs/cgroup/memory/test# echo 120M > memory.limit_in_bytes
root@lp2:/sys/fs/cgroup/memory/test# echo $$ > tasks
root@lp2:/sys/fs/cgroup/memory/test# dd if=/dev/zero of=/home/kvaneesh/test bs=1M
Killed
Link: https://lkml.kernel.org/r/20221118070603.84081-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: zefan li <lizefan.x@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The page reclaim isolates a batch of folios from the tail of one of the
LRU lists and works on those folios one by one. For a suitable
swap-backed folio, if the swap device is async, it queues that folio for
writeback. After the page reclaim finishes an entire batch, it puts back
the folios it queued for writeback to the head of the original LRU list.
In the meantime, the page writeback flushes the queued folios also by
batches. Its batching logic is independent from that of the page reclaim.
For each of the folios it writes back, the page writeback calls
folio_rotate_reclaimable() which tries to rotate a folio to the tail.
folio_rotate_reclaimable() only works for a folio after the page reclaim
has put it back. If an async swap device is fast enough, the page
writeback can finish with that folio while the page reclaim is still
working on the rest of the batch containing it. In this case, that folio
will remain at the head and the page reclaim will not retry it before
reaching there.
This patch adds a retry to evict_folios(). After evict_folios() has
finished an entire batch and before it puts back folios it cannot free
immediately, it retries those that may have missed the rotation.
Before this patch, ~60% of folios swapped to an Intel Optane missed
folio_rotate_reclaimable(). After this patch, ~99% of missed folios were
reclaimed upon retry.
This problem affects relatively slow async swap devices like Samsung 980
Pro much less and does not affect sync swap devices like zram or zswap at
all.
Link: https://lkml.kernel.org/r/20221116013808.3995280-1-yuzhao@google.com
Fixes: ac35a4902374 ("mm: multi-gen LRU: minimal implementation")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: "Yin, Fengwei" <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
During proactive reclaim, we sometimes observe severe overreclaim, with
several thousand times more pages reclaimed than requested.
This trace was obtained from shrink_lruvec() during such an instance:
prio:0 anon_cost:1141521 file_cost:7767
nr_reclaimed:4387406 nr_to_reclaim:1047 (or_factor:4190)
nr=[7161123 345 578 1111]
While he reclaimer requested 4M, vmscan reclaimed close to 16G, most of it
by swapping. These requests take over a minute, during which the write()
to memory.reclaim is unkillably stuck inside the kernel.
Digging into the source, this is caused by the proportional reclaim
bailout logic. This code tries to resolve a fundamental conflict: to
reclaim roughly what was requested, while also aging all LRUs fairly and
in accordance to their size, swappiness, refault rates etc. The way it
attempts fairness is that once the reclaim goal has been reached, it stops
scanning the LRUs with the smaller remaining scan targets, and adjusts the
remainder of the bigger LRUs according to how much of the smaller LRUs was
scanned. It then finishes scanning that remainder regardless of the
reclaim goal.
This works fine if priority levels are low and the LRU lists are
comparable in size. However, in this instance, the cgroup that is
targeted by proactive reclaim has almost no files left - they've already
been squeezed out by proactive reclaim earlier - and the remaining anon
pages are hot. Anon rotations cause the priority level to drop to 0,
which results in reclaim targeting all of anon (a lot) and all of file
(almost nothing). By the time reclaim decides to bail, it has scanned
most or all of the file target, and therefor must also scan most or all of
the enormous anon target. This target is thousands of times larger than
the reclaim goal, thus causing the overreclaim.
The bailout code hasn't changed in years, why is this failing now? The
most likely explanations are two other recent changes in anon reclaim:
1. Before the series starting with commit 5df741963d52 ("mm: fix LRU
balancing effect of new transparent huge pages"), the VM was
overall relatively reluctant to swap at all, even if swap was
configured. This means the LRU balancing code didn't come into play
as often as it does now, and mostly in high pressure situations
where pronounced swap activity wouldn't be as surprising.
2. For historic reasons, shrink_lruvec() loops on the scan targets of
all LRU lists except the active anon one, meaning it would bail if
the only remaining pages to scan were active anon - even if there
were a lot of them.
Before the series starting with commit ccc5dc67340c ("mm/vmscan:
make active/inactive ratio as 1:1 for anon lru"), most anon pages
would live on the active LRU; the inactive one would contain only a
handful of preselected reclaim candidates. After the series, anon
gets aged similarly to file, and the inactive list is the default
for new anon pages as well, making it often the much bigger list.
As a result, the VM is now more likely to actually finish large
anon targets than before.
Change the code such that only one SWAP_CLUSTER_MAX-sized nudge toward the
larger LRU lists is made before bailing out on a met reclaim goal.
This fixes the extreme overreclaim problem.
Fairness is more subtle and harder to evaluate. No obvious misbehavior
was observed on the test workload, in any case. Conceptually, fairness
should primarily be a cumulative effect from regular, lower priority
scans. Once the VM is in trouble and needs to escalate scan targets to
make forward progress, fairness needs to take a backseat. This is also
acknowledged by the myriad exceptions in get_scan_count(). This patch
makes fairness decrease gradually, as it keeps fairness work static over
increasing priority levels with growing scan targets. This should make
more sense - although we may have to re-visit the exact values.
Link: https://lkml.kernel.org/r/20220802162811.39216-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Link: https://lkml.kernel.org/r/YzSWfFI+MOeb1ils@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
wakeup_flusher_threads() was added under the assumption that if a system
runs out of clean cold pages, it might want to write back dirty pages more
aggressively so that they can become clean and be dropped.
However, doing so can breach the rate limit a system wants to impose on
writeback, resulting in early SSD wearout.
Link: https://lkml.kernel.org/r/YzSiWq9UEER5LKup@google.com
Fixes: bd74fdaea146 ("mm: multi-gen LRU: support page table walks")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reported-by: Axel Rasmussen <axelrasmussen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All callers now have a folio, so convert the function to take a folio.
Saves a couple of calls to compound_head().
Link: https://lkml.kernel.org/r/20220902194653.1739778-48-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With all callers now using a folio, we can convert this function.
Link: https://lkml.kernel.org/r/20220902194653.1739778-14-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add kernel-doc for folio_free_swap() and make it return bool. Add a
try_to_free_swap() compatibility wrapper.
Link: https://lkml.kernel.org/r/20220902194653.1739778-11-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "MM folio changes for 6.1", v2.
My focus this round has been on shmem. I believe it is now fully
converted to folios. Of course, shmem interacts with a lot of the swap
cache and other parts of the kernel, so there are patches all over the MM.
This patch series survives a round of xfstests on tmpfs, which is nice,
but hardly an exhaustive test. Hugh was nice enough to run a round of
tests on it and found a bug which is fixed in this edition.
This patch (of 57):
A lot of comments mention pages when they should say folios.
Fix them up.
[akpm@linux-foundation.org: fixups for mglru additions]
Link: https://lkml.kernel.org/r/20220902194653.1739778-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20220902194653.1739778-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the vma iterator in in get_next_vma() instead of the linked list.
[yuzhao@google.com: mm/vmscan: use the proper VMA iterator]
Link: https://lkml.kernel.org/r/Yx+QGOgHg1Wk8tGK@google.com
Link: https://lkml.kernel.org/r/20220906194824.2110408-68-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Yu Zhao <yuzhao@google.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, a higher tier node can only be demoted to selected nodes on the
next lower tier as defined by the demotion path. This strict demotion
order does not work in all use cases (e.g. some use cases may want to
allow cross-socket demotion to another node in the same demotion tier as a
fallback when the preferred demotion node is out of space). This demotion
order is also inconsistent with the page allocation fallback order when
all the nodes in a higher tier are out of space: The page allocation can
fall back to any node from any lower tier, whereas the demotion order
doesn't allow that currently.
This patch adds support to get all the allowed demotion targets for a
memory tier. demote_page_list() function is now modified to utilize this
allowed node mask as the fallback allocation mask.
Link: https://lkml.kernel.org/r/20220818131042.113280-9-aneesh.kumar@linux.ibm.com
Signed-off-by: Jagdish Gediya <jvgediya.oss@gmail.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Wei Xu <weixugc@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hesham Almatary <hesham.almatary@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This moves memory demotion related code to mm/memory-tiers.c. No
functional change in this patch.
Link: https://lkml.kernel.org/r/20220818131042.113280-3-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Wei Xu <weixugc@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hesham Almatary <hesham.almatary@huawei.com>
Cc: Jagdish Gediya <jvgediya.oss@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add an admin guide.
Link: https://lkml.kernel.org/r/20220918080010.2920238-14-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add /sys/kernel/debug/lru_gen for working set estimation and proactive
reclaim. These techniques are commonly used to optimize job scheduling
(bin packing) in data centers [1][2].
Compared with the page table-based approach and the PFN-based
approach, this lruvec-based approach has the following advantages:
1. It offers better choices because it is aware of memcgs, NUMA nodes,
shared mappings and unmapped page cache.
2. It is more scalable because it is O(nr_hot_pages), whereas the
PFN-based approach is O(nr_total_pages).
Add /sys/kernel/debug/lru_gen_full for debugging.
[1] https://dl.acm.org/doi/10.1145/3297858.3304053
[2] https://dl.acm.org/doi/10.1145/3503222.3507731
Link: https://lkml.kernel.org/r/20220918080010.2920238-13-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add /sys/kernel/mm/lru_gen/min_ttl_ms for thrashing prevention, as
requested by many desktop users [1].
When set to value N, it prevents the working set of N milliseconds from
getting evicted. The OOM killer is triggered if this working set cannot
be kept in memory. Based on the average human detectable lag (~100ms),
N=1000 usually eliminates intolerable lags due to thrashing. Larger
values like N=3000 make lags less noticeable at the risk of premature OOM
kills.
Compared with the size-based approach [2], this time-based approach
has the following advantages:
1. It is easier to configure because it is agnostic to applications
and memory sizes.
2. It is more reliable because it is directly wired to the OOM killer.
[1] https://lore.kernel.org/r/Ydza%2FzXKY9ATRoh6@google.com/
[2] https://lore.kernel.org/r/20101028191523.GA14972@google.com/
Link: https://lkml.kernel.org/r/20220918080010.2920238-12-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add /sys/kernel/mm/lru_gen/enabled as a kill switch. Components that
can be disabled include:
0x0001: the multi-gen LRU core
0x0002: walking page table, when arch_has_hw_pte_young() returns
true
0x0004: clearing the accessed bit in non-leaf PMD entries, when
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y
[yYnN]: apply to all the components above
E.g.,
echo y >/sys/kernel/mm/lru_gen/enabled
cat /sys/kernel/mm/lru_gen/enabled
0x0007
echo 5 >/sys/kernel/mm/lru_gen/enabled
cat /sys/kernel/mm/lru_gen/enabled
0x0005
NB: the page table walks happen on the scale of seconds under heavy memory
pressure, in which case the mmap_lock contention is a lesser concern,
compared with the LRU lock contention and the I/O congestion. So far the
only well-known case of the mmap_lock contention happens on Android, due
to Scudo [1] which allocates several thousand VMAs for merely a few
hundred MBs. The SPF and the Maple Tree also have provided their own
assessments [2][3]. However, if walking page tables does worsen the
mmap_lock contention, the kill switch can be used to disable it. In this
case the multi-gen LRU will suffer a minor performance degradation, as
shown previously.
Clearing the accessed bit in non-leaf PMD entries can also be disabled,
since this behavior was not tested on x86 varieties other than Intel and
AMD.
[1] https://source.android.com/devices/tech/debug/scudo
[2] https://lore.kernel.org/r/20220128131006.67712-1-michel@lespinasse.org/
[3] https://lore.kernel.org/r/20220426150616.3937571-1-Liam.Howlett@oracle.com/
Link: https://lkml.kernel.org/r/20220918080010.2920238-11-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When multiple memcgs are available, it is possible to use generations as a
frame of reference to make better choices and improve overall performance
under global memory pressure. This patch adds a basic optimization to
select memcgs that can drop single-use unmapped clean pages first. Doing
so reduces the chance of going into the aging path or swapping, which can
be costly.
A typical example that benefits from this optimization is a server running
mixed types of workloads, e.g., heavy anon workload in one memcg and heavy
buffered I/O workload in the other.
Though this optimization can be applied to both kswapd and direct reclaim,
it is only added to kswapd to keep the patchset manageable. Later
improvements may cover the direct reclaim path.
While ensuring certain fairness to all eligible memcgs, proportional scans
of individual memcgs also require proper backoff to avoid overshooting
their aggregate reclaim target by too much. Otherwise it can cause high
direct reclaim latency. The conditions for backoff are:
1. At low priorities, for direct reclaim, if aging fairness or direct
reclaim latency is at risk, i.e., aging one memcg multiple times or
swapping after the target is met.
2. At high priorities, for global reclaim, if per-zone free pages are
above respective watermarks.
Server benchmark results:
Mixed workloads:
fio (buffered I/O): +[19, 21]%
IOPS BW
patch1-8: 1880k 7343MiB/s
patch1-9: 2252k 8796MiB/s
memcached (anon): +[119, 123]%
Ops/sec KB/sec
patch1-8: 862768.65 33514.68
patch1-9: 1911022.12 74234.54
Mixed workloads:
fio (buffered I/O): +[75, 77]%
IOPS BW
5.19-rc1: 1279k 4996MiB/s
patch1-9: 2252k 8796MiB/s
memcached (anon): +[13, 15]%
Ops/sec KB/sec
5.19-rc1: 1673524.04 65008.87
patch1-9: 1911022.12 74234.54
Configurations:
(changes since patch 6)
cat mixed.sh
modprobe brd rd_nr=2 rd_size=56623104
swapoff -a
mkswap /dev/ram0
swapon /dev/ram0
mkfs.ext4 /dev/ram1
mount -t ext4 /dev/ram1 /mnt
memtier_benchmark -S /var/run/memcached/memcached.sock \
-P memcache_binary -n allkeys --key-minimum=1 \
--key-maximum=50000000 --key-pattern=P:P -c 1 -t 36 \
--ratio 1:0 --pipeline 8 -d 2000
fio -name=mglru --numjobs=36 --directory=/mnt --size=1408m \
--buffered=1 --ioengine=io_uring --iodepth=128 \
--iodepth_batch_submit=32 --iodepth_batch_complete=32 \
--rw=randread --random_distribution=random --norandommap \
--time_based --ramp_time=10m --runtime=90m --group_reporting &
pid=$!
sleep 200
memtier_benchmark -S /var/run/memcached/memcached.sock \
-P memcache_binary -n allkeys --key-minimum=1 \
--key-maximum=50000000 --key-pattern=R:R -c 1 -t 36 \
--ratio 0:1 --pipeline 8 --randomize --distinct-client-seed
kill -INT $pid
wait
Client benchmark results:
no change (CONFIG_MEMCG=n)
Link: https://lkml.kernel.org/r/20220918080010.2920238-10-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
To further exploit spatial locality, the aging prefers to walk page tables
to search for young PTEs and promote hot pages. A kill switch will be
added in the next patch to disable this behavior. When disabled, the
aging relies on the rmap only.
NB: this behavior has nothing similar with the page table scanning in the
2.4 kernel [1], which searches page tables for old PTEs, adds cold pages
to swapcache and unmaps them.
To avoid confusion, the term "iteration" specifically means the traversal
of an entire mm_struct list; the term "walk" will be applied to page
tables and the rmap, as usual.
An mm_struct list is maintained for each memcg, and an mm_struct follows
its owner task to the new memcg when this task is migrated. Given an
lruvec, the aging iterates lruvec_memcg()->mm_list and calls
walk_page_range() with each mm_struct on this list to promote hot pages
before it increments max_seq.
When multiple page table walkers iterate the same list, each of them gets
a unique mm_struct; therefore they can run concurrently. Page table
walkers ignore any misplaced pages, e.g., if an mm_struct was migrated,
pages it left in the previous memcg will not be promoted when its current
memcg is under reclaim. Similarly, page table walkers will not promote
pages from nodes other than the one under reclaim.
This patch uses the following optimizations when walking page tables:
1. It tracks the usage of mm_struct's between context switches so that
page table walkers can skip processes that have been sleeping since
the last iteration.
2. It uses generational Bloom filters to record populated branches so
that page table walkers can reduce their search space based on the
query results, e.g., to skip page tables containing mostly holes or
misplaced pages.
3. It takes advantage of the accessed bit in non-leaf PMD entries when
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y.
4. It does not zigzag between a PGD table and the same PMD table
spanning multiple VMAs. IOW, it finishes all the VMAs within the
range of the same PMD table before it returns to a PGD table. This
improves the cache performance for workloads that have large
numbers of tiny VMAs [2], especially when CONFIG_PGTABLE_LEVELS=5.
Server benchmark results:
Single workload:
fio (buffered I/O): no change
Single workload:
memcached (anon): +[8, 10]%
Ops/sec KB/sec
patch1-7: 1147696.57 44640.29
patch1-8: 1245274.91 48435.66
Configurations:
no change
Client benchmark results:
kswapd profiles:
patch1-7
48.16% lzo1x_1_do_compress (real work)
8.20% page_vma_mapped_walk (overhead)
7.06% _raw_spin_unlock_irq
2.92% ptep_clear_flush
2.53% __zram_bvec_write
2.11% do_raw_spin_lock
2.02% memmove
1.93% lru_gen_look_around
1.56% free_unref_page_list
1.40% memset
patch1-8
49.44% lzo1x_1_do_compress (real work)
6.19% page_vma_mapped_walk (overhead)
5.97% _raw_spin_unlock_irq
3.13% get_pfn_folio
2.85% ptep_clear_flush
2.42% __zram_bvec_write
2.08% do_raw_spin_lock
1.92% memmove
1.44% alloc_zspage
1.36% memset
Configurations:
no change
Thanks to the following developers for their efforts [3].
kernel test robot <lkp@intel.com>
[1] https://lwn.net/Articles/23732/
[2] https://llvm.org/docs/ScudoHardenedAllocator.html
[3] https://lore.kernel.org/r/202204160827.ekEARWQo-lkp@intel.com/
Link: https://lkml.kernel.org/r/20220918080010.2920238-9-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Searching the rmap for PTEs mapping each page on an LRU list (to test and
clear the accessed bit) can be expensive because pages from different VMAs
(PA space) are not cache friendly to the rmap (VA space). For workloads
mostly using mapped pages, searching the rmap can incur the highest CPU
cost in the reclaim path.
This patch exploits spatial locality to reduce the trips into the rmap.
When shrink_page_list() walks the rmap and finds a young PTE, a new
function lru_gen_look_around() scans at most BITS_PER_LONG-1 adjacent
PTEs. On finding another young PTE, it clears the accessed bit and
updates the gen counter of the page mapped by this PTE to
(max_seq%MAX_NR_GENS)+1.
Server benchmark results:
Single workload:
fio (buffered I/O): no change
Single workload:
memcached (anon): +[3, 5]%
Ops/sec KB/sec
patch1-6: 1106168.46 43025.04
patch1-7: 1147696.57 44640.29
Configurations:
no change
Client benchmark results:
kswapd profiles:
patch1-6
39.03% lzo1x_1_do_compress (real work)
18.47% page_vma_mapped_walk (overhead)
6.74% _raw_spin_unlock_irq
3.97% do_raw_spin_lock
2.49% ptep_clear_flush
2.48% anon_vma_interval_tree_iter_first
1.92% folio_referenced_one
1.88% __zram_bvec_write
1.48% memmove
1.31% vma_interval_tree_iter_next
patch1-7
48.16% lzo1x_1_do_compress (real work)
8.20% page_vma_mapped_walk (overhead)
7.06% _raw_spin_unlock_irq
2.92% ptep_clear_flush
2.53% __zram_bvec_write
2.11% do_raw_spin_lock
2.02% memmove
1.93% lru_gen_look_around
1.56% free_unref_page_list
1.40% memset
Configurations:
no change
Link: https://lkml.kernel.org/r/20220918080010.2920238-8-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Barry Song <baohua@kernel.org>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
To avoid confusion, the terms "promotion" and "demotion" will be applied
to the multi-gen LRU, as a new convention; the terms "activation" and
"deactivation" will be applied to the active/inactive LRU, as usual.
The aging produces young generations. Given an lruvec, it increments
max_seq when max_seq-min_seq+1 approaches MIN_NR_GENS. The aging promotes
hot pages to the youngest generation when it finds them accessed through
page tables; the demotion of cold pages happens consequently when it
increments max_seq. Promotion in the aging path does not involve any LRU
list operations, only the updates of the gen counter and
lrugen->nr_pages[]; demotion, unless as the result of the increment of
max_seq, requires LRU list operations, e.g., lru_deactivate_fn(). The
aging has the complexity O(nr_hot_pages), since it is only interested in
hot pages.
The eviction consumes old generations. Given an lruvec, it increments
min_seq when lrugen->lists[] indexed by min_seq%MAX_NR_GENS becomes empty.
A feedback loop modeled after the PID controller monitors refaults over
anon and file types and decides which type to evict when both types are
available from the same generation.
The protection of pages accessed multiple times through file descriptors
takes place in the eviction path. Each generation is divided into
multiple tiers. A page accessed N times through file descriptors is in
tier order_base_2(N). Tiers do not have dedicated lrugen->lists[], only
bits in folio->flags. The aforementioned feedback loop also monitors
refaults over all tiers and decides when to protect pages in which tiers
(N>1), using the first tier (N=0,1) as a baseline. The first tier
contains single-use unmapped clean pages, which are most likely the best
choices. In contrast to promotion in the aging path, the protection of a
page in the eviction path is achieved by moving this page to the next
generation, i.e., min_seq+1, if the feedback loop decides so. This
approach has the following advantages:
1. It removes the cost of activation in the buffered access path by
inferring whether pages accessed multiple times through file
descriptors are statistically hot and thus worth protecting in the
eviction path.
2. It takes pages accessed through page tables into account and avoids
overprotecting pages accessed multiple times through file
descriptors. (Pages accessed through page tables are in the first
tier, since N=0.)
3. More tiers provide better protection for pages accessed more than
twice through file descriptors, when under heavy buffered I/O
workloads.
Server benchmark results:
Single workload:
fio (buffered I/O): +[30, 32]%
IOPS BW
5.19-rc1: 2673k 10.2GiB/s
patch1-6: 3491k 13.3GiB/s
Single workload:
memcached (anon): -[4, 6]%
Ops/sec KB/sec
5.19-rc1: 1161501.04 45177.25
patch1-6: 1106168.46 43025.04
Configurations:
CPU: two Xeon 6154
Mem: total 256G
Node 1 was only used as a ram disk to reduce the variance in the
results.
patch drivers/block/brd.c <<EOF
99,100c99,100
< gfp_flags = GFP_NOIO | __GFP_ZERO | __GFP_HIGHMEM;
< page = alloc_page(gfp_flags);
---
> gfp_flags = GFP_NOIO | __GFP_ZERO | __GFP_HIGHMEM | __GFP_THISNODE;
> page = alloc_pages_node(1, gfp_flags, 0);
EOF
cat >>/etc/systemd/system.conf <<EOF
CPUAffinity=numa
NUMAPolicy=bind
NUMAMask=0
EOF
cat >>/etc/memcached.conf <<EOF
-m 184320
-s /var/run/memcached/memcached.sock
-a 0766
-t 36
-B binary
EOF
cat fio.sh
modprobe brd rd_nr=1 rd_size=113246208
swapoff -a
mkfs.ext4 /dev/ram0
mount -t ext4 /dev/ram0 /mnt
mkdir /sys/fs/cgroup/user.slice/test
echo 38654705664 >/sys/fs/cgroup/user.slice/test/memory.max
echo $$ >/sys/fs/cgroup/user.slice/test/cgroup.procs
fio -name=mglru --numjobs=72 --directory=/mnt --size=1408m \
--buffered=1 --ioengine=io_uring --iodepth=128 \
--iodepth_batch_submit=32 --iodepth_batch_complete=32 \
--rw=randread --random_distribution=random --norandommap \
--time_based --ramp_time=10m --runtime=5m --group_reporting
cat memcached.sh
modprobe brd rd_nr=1 rd_size=113246208
swapoff -a
mkswap /dev/ram0
swapon /dev/ram0
memtier_benchmark -S /var/run/memcached/memcached.sock \
-P memcache_binary -n allkeys --key-minimum=1 \
--key-maximum=65000000 --key-pattern=P:P -c 1 -t 36 \
--ratio 1:0 --pipeline 8 -d 2000
memtier_benchmark -S /var/run/memcached/memcached.sock \
-P memcache_binary -n allkeys --key-minimum=1 \
--key-maximum=65000000 --key-pattern=R:R -c 1 -t 36 \
--ratio 0:1 --pipeline 8 --randomize --distinct-client-seed
Client benchmark results:
kswapd profiles:
5.19-rc1
40.33% page_vma_mapped_walk (overhead)
21.80% lzo1x_1_do_compress (real work)
7.53% do_raw_spin_lock
3.95% _raw_spin_unlock_irq
2.52% vma_interval_tree_iter_next
2.37% folio_referenced_one
2.28% vma_interval_tree_subtree_search
1.97% anon_vma_interval_tree_iter_first
1.60% ptep_clear_flush
1.06% __zram_bvec_write
patch1-6
39.03% lzo1x_1_do_compress (real work)
18.47% page_vma_mapped_walk (overhead)
6.74% _raw_spin_unlock_irq
3.97% do_raw_spin_lock
2.49% ptep_clear_flush
2.48% anon_vma_interval_tree_iter_first
1.92% folio_referenced_one
1.88% __zram_bvec_write
1.48% memmove
1.31% vma_interval_tree_iter_next
Configurations:
CPU: single Snapdragon 7c
Mem: total 4G
ChromeOS MemoryPressure [1]
[1] https://chromium.googlesource.com/chromiumos/platform/tast-tests/
Link: https://lkml.kernel.org/r/20220918080010.2920238-7-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Evictable pages are divided into multiple generations for each lruvec.
The youngest generation number is stored in lrugen->max_seq for both
anon and file types as they are aged on an equal footing. The oldest
generation numbers are stored in lrugen->min_seq[] separately for anon
and file types as clean file pages can be evicted regardless of swap
constraints. These three variables are monotonically increasing.
Generation numbers are truncated into order_base_2(MAX_NR_GENS+1) bits
in order to fit into the gen counter in folio->flags. Each truncated
generation number is an index to lrugen->lists[]. The sliding window
technique is used to track at least MIN_NR_GENS and at most
MAX_NR_GENS generations. The gen counter stores a value within [1,
MAX_NR_GENS] while a page is on one of lrugen->lists[]. Otherwise it
stores 0.
There are two conceptually independent procedures: "the aging", which
produces young generations, and "the eviction", which consumes old
generations. They form a closed-loop system, i.e., "the page reclaim".
Both procedures can be invoked from userspace for the purposes of working
set estimation and proactive reclaim. These techniques are commonly used
to optimize job scheduling (bin packing) in data centers [1][2].
To avoid confusion, the terms "hot" and "cold" will be applied to the
multi-gen LRU, as a new convention; the terms "active" and "inactive" will
be applied to the active/inactive LRU, as usual.
The protection of hot pages and the selection of cold pages are based
on page access channels and patterns. There are two access channels:
one through page tables and the other through file descriptors. The
protection of the former channel is by design stronger because:
1. The uncertainty in determining the access patterns of the former
channel is higher due to the approximation of the accessed bit.
2. The cost of evicting the former channel is higher due to the TLB
flushes required and the likelihood of encountering the dirty bit.
3. The penalty of underprotecting the former channel is higher because
applications usually do not prepare themselves for major page
faults like they do for blocked I/O. E.g., GUI applications
commonly use dedicated I/O threads to avoid blocking rendering
threads.
There are also two access patterns: one with temporal locality and the
other without. For the reasons listed above, the former channel is
assumed to follow the former pattern unless VM_SEQ_READ or VM_RAND_READ is
present; the latter channel is assumed to follow the latter pattern unless
outlying refaults have been observed [3][4].
The next patch will address the "outlying refaults". Three macros, i.e.,
LRU_REFS_WIDTH, LRU_REFS_PGOFF and LRU_REFS_MASK, used later are added in
this patch to make the entire patchset less diffy.
A page is added to the youngest generation on faulting. The aging needs
to check the accessed bit at least twice before handing this page over to
the eviction. The first check takes care of the accessed bit set on the
initial fault; the second check makes sure this page has not been used
since then. This protocol, AKA second chance, requires a minimum of two
generations, hence MIN_NR_GENS.
[1] https://dl.acm.org/doi/10.1145/3297858.3304053
[2] https://dl.acm.org/doi/10.1145/3503222.3507731
[3] https://lwn.net/Articles/495543/
[4] https://lwn.net/Articles/815342/
Link: https://lkml.kernel.org/r/20220918080010.2920238-6-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch refactors shrink_node() to improve readability for the upcoming
changes to mm/vmscan.c.
Link: https://lkml.kernel.org/r/20220918080010.2920238-4-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
kswapd_run/stop() will set pgdat->kswapd to NULL, which could race with
kswapd_is_running() in kcompactd(),
kswapd_run/stop() kcompactd()
kswapd_is_running()
pgdat->kswapd // error or nomal ptr
verify pgdat->kswapd
// load non-NULL
pgdat->kswapd
pgdat->kswapd = NULL
task_is_running(pgdat->kswapd)
// Null pointer derefence
KASAN reports the null-ptr-deref shown below,
vmscan: Failed to start kswapd on node 0
...
BUG: KASAN: null-ptr-deref in kcompactd+0x440/0x504
Read of size 8 at addr 0000000000000024 by task kcompactd0/37
CPU: 0 PID: 37 Comm: kcompactd0 Kdump: loaded Tainted: G OE 5.10.60 #1
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
Call trace:
dump_backtrace+0x0/0x394
show_stack+0x34/0x4c
dump_stack+0x158/0x1e4
__kasan_report+0x138/0x140
kasan_report+0x44/0xdc
__asan_load8+0x94/0xd0
kcompactd+0x440/0x504
kthread+0x1a4/0x1f0
ret_from_fork+0x10/0x18
At present kswapd/kcompactd_run() and kswapd/kcompactd_stop() are protected
by mem_hotplug_begin/done(), but without kcompactd(). There is no need to
involve memory hotplug lock in kcompactd(), so let's add a new mutex to
protect pgdat->kswapd accesses.
Also, because the kcompactd task will check the state of kswapd task, it's
better to call kcompactd_stop() before kswapd_stop() to reduce lock
conflicts.
[akpm@linux-foundation.org: add comments]
Link: https://lkml.kernel.org/r/20220827111959.186838-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After patch "mm/workingset: prepare the workingset detection
infrastructure for anon LRU", we can handle the refaults of anonymous
pages too. So the annotations of refaults should cover both of anonymous
pages and file pages.
Link: https://lkml.kernel.org/r/20220813080757.59131-1-yang.yang29@zte.com.cn
Fixes: 170b04b7ae4963 ("mm/workingset: prepare the workingset detection infrastructure for anon LRU")
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The magic number 0 and 1 are used in several places in vmscan.c.
Define macros for them to improve code readability.
Link: https://lkml.kernel.org/r/20220808005644.1721066-1-yang.yang29@zte.com.cn
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
These two predicates are the same for file pages, but are not the same for
anonymous pages.
Link: https://lkml.kernel.org/r/20220902192639.1737108-3-willy@infradead.org
Fixes: 07f67a8dedc0 ("mm/vmscan: convert shrink_active_list() to use a folio")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Most of the MM queue. A few things are still pending.
Liam's maple tree rework didn't make it. This has resulted in a few
other minor patch series being held over for next time.
Multi-gen LRU still isn't merged as we were waiting for mapletree to
stabilize. The current plan is to merge MGLRU into -mm soon and to
later reintroduce mapletree, with a view to hopefully getting both
into 6.1-rc1.
Summary:
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve
latency and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place"
[ XFS merge from hell as per Darrick Wong in
https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]
* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
tools/testing/selftests/vm/hmm-tests.c: fix build
mm: Kconfig: fix typo
mm: memory-failure: convert to pr_fmt()
mm: use is_zone_movable_page() helper
hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
hugetlbfs: cleanup some comments in inode.c
hugetlbfs: remove unneeded header file
hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
hugetlbfs: use helper macro SZ_1{K,M}
mm: cleanup is_highmem()
mm/hmm: add a test for cross device private faults
selftests: add soft-dirty into run_vmtests.sh
selftests: soft-dirty: add test for mprotect
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
mm: memcontrol: fix potential oom_lock recursion deadlock
mm/gup.c: fix formatting in check_and_migrate_movable_page()
xfs: fail dax mount if reflink is enabled on a partition
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
userfaultfd: don't fail on unrecognized features
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
...
|
|
memory.reclaim is a cgroup v2 interface that allows users to proactively
reclaim memory from a memcg, without real memory pressure. Reclaim
operations invoke vmpressure, which is used: (a) To notify userspace of
reclaim efficiency in cgroup v1, and (b) As a signal for a memcg being
under memory pressure for networking (see
mem_cgroup_under_socket_pressure()).
For (a), vmpressure notifications in v1 are not affected by this change
since memory.reclaim is a v2 feature.
For (b), the effects of the vmpressure signal (according to Shakeel [1])
are as follows:
1. Reducing send and receive buffers of the current socket.
2. May drop packets on the rx path.
3. May throttle current thread on the tx path.
Since proactive reclaim is invoked directly by userspace, not by memory
pressure, it makes sense not to throttle networking. Hence, this change
makes sure that proactive reclaim caused by memory.reclaim does not
trigger vmpressure.
[1] https://lore.kernel.org/lkml/CALvZod68WdrXEmBpOkadhB5GPYmCXaDZzXH=yyGOCAjFRn4NDQ@mail.gmail.com/
[yosryahmed@google.com: update documentation]
Link: https://lkml.kernel.org/r/20220721173015.2643248-1-yosryahmed@google.com
Link: https://lkml.kernel.org/r/20220714064918.2576464-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
syzbot is reporting double kfree() at free_prealloced_shrinker() [1], for
destroy_unused_super() calls free_prealloced_shrinker() even if
prealloc_shrinker() returned an error. Explicitly clear shrinker name
when prealloc_shrinker() called kfree().
[roman.gushchin@linux.dev: zero shrinker->name in all cases where shrinker->name is freed]
Link: https://lkml.kernel.org/r/YtgteTnQTgyuKUSY@castle
Link: https://syzkaller.appspot.com/bug?extid=8b481578352d4637f510 [1]
Link: https://lkml.kernel.org/r/ffa62ece-6a42-2644-16cf-0d33ef32c676@I-love.SAKURA.ne.jp
Fixes: e33c267ab70de424 ("mm: shrinkers: provide shrinkers with names")
Reported-by: syzbot <syzbot+8b481578352d4637f510@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Comments that mention mem_hotplug_end() are confusing as there is no
function called mem_hotplug_end(). Fix them by replacing all the
occurences of mem_hotplug_end() in the comments with mem_hotplug_done().
[akpm@linux-foundation.org: grammatical fixes]
Link: https://lkml.kernel.org/r/20220620071516.1286101-1-p76091292@gs.ncku.edu.tw
Signed-off-by: Yun-Ze Li <p76091292@gs.ncku.edu.tw>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All callers now have a folio, so convert the entire function to operate
on folios.
Link: https://lkml.kernel.org/r/20220617175020.717127-23-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The only caller already has a folio, so push the folio->page conversion
down a level.
Link: https://lkml.kernel.org/r/20220617175020.717127-21-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All callers now have a folio, so push the folio->page conversion
down to this function.
[akpm@linux-foundation.org: uninline destroy_large_folio() to fix build issue]
Link: https://lkml.kernel.org/r/20220617175020.717127-20-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove a few hidden calls to compound_head, saving 76 bytes of text.
Link: https://lkml.kernel.org/r/20220617154248.700416-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove a few hidden calls to compound_head, saving 411 bytes of text.
Link: https://lkml.kernel.org/r/20220617154248.700416-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove a few hidden calls to compound_head, saving 387 bytes of text on
my test configuration.
Link: https://lkml.kernel.org/r/20220617154248.700416-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove a few hidden calls to compound_head, saving 279 bytes of text.
Link: https://lkml.kernel.org/r/20220617154248.700416-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "nvert much of vmscan to folios"
vmscan always operates on folios since it puts the pages on the LRU list.
Switching all of these functions from pages to folios saves 1483 bytes of
text from removing all the baggage around calling compound_page() and
similar functions.
This patch (of 5):
This is a straightforward conversion which removes several hidden calls
to compound_head, saving 330 bytes of kernel text.
Link: https://lkml.kernel.org/r/20220617154248.700416-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20220617154248.700416-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently shrinkers are anonymous objects. For debugging purposes they
can be identified by count/scan function names, but it's not always
useful: e.g. for superblock's shrinkers it's nice to have at least an
idea of to which superblock the shrinker belongs.
This commit adds names to shrinkers. register_shrinker() and
prealloc_shrinker() functions are extended to take a format and arguments
to master a name.
In some cases it's not possible to determine a good name at the time when
a shrinker is allocated. For such cases shrinker_debugfs_rename() is
provided.
The expected format is:
<subsystem>-<shrinker_type>[:<instance>]-<id>
For some shrinkers an instance can be encoded as (MAJOR:MINOR) pair.
After this change the shrinker debugfs directory looks like:
$ cd /sys/kernel/debug/shrinker/
$ ls
dquota-cache-16 sb-devpts-28 sb-proc-47 sb-tmpfs-42
mm-shadow-18 sb-devtmpfs-5 sb-proc-48 sb-tmpfs-43
mm-zspool:zram0-34 sb-hugetlbfs-17 sb-pstore-31 sb-tmpfs-44
rcu-kfree-0 sb-hugetlbfs-33 sb-rootfs-2 sb-tmpfs-49
sb-aio-20 sb-iomem-12 sb-securityfs-6 sb-tracefs-13
sb-anon_inodefs-15 sb-mqueue-21 sb-selinuxfs-22 sb-xfs:vda1-36
sb-bdev-3 sb-nsfs-4 sb-sockfs-8 sb-zsmalloc-19
sb-bpf-32 sb-pipefs-14 sb-sysfs-26 thp-deferred_split-10
sb-btrfs:vda2-24 sb-proc-25 sb-tmpfs-1 thp-zero-9
sb-cgroup2-30 sb-proc-39 sb-tmpfs-27 xfs-buf:vda1-37
sb-configfs-23 sb-proc-41 sb-tmpfs-29 xfs-inodegc:vda1-38
sb-dax-11 sb-proc-45 sb-tmpfs-35
sb-debugfs-7 sb-proc-46 sb-tmpfs-40
[roman.gushchin@linux.dev: fix build warnings]
Link: https://lkml.kernel.org/r/Yr+ZTnLb9lJk6fJO@castle
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lkml.kernel.org/r/20220601032227.4076670-4-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This commit introduces the /sys/kernel/debug/shrinker debugfs interface
which provides an ability to observe the state of individual kernel memory
shrinkers.
Because the feature adds some memory overhead (which shouldn't be large
unless there is a huge amount of registered shrinkers), it's guarded by a
config option (enabled by default).
This commit introduces the "count" interface for each shrinker registered
in the system.
The output is in the following format:
<cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>...
<cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>...
...
To reduce the size of output on machines with many thousands cgroups, if
the total number of objects on all nodes is 0, the line is omitted.
If the shrinker is not memcg-aware or CONFIG_MEMCG is off, 0 is printed as
cgroup inode id. If the shrinker is not numa-aware, 0's are printed for
all nodes except the first one.
This commit gives debugfs entries simple numeric names, which are not very
convenient. The following commit in the series will provide shrinkers
with more meaningful names.
[akpm@linux-foundation.org: remove WARN_ON_ONCE(), per Roman]
Reported-by: syzbot+300d27c79fe6d4cbcc39@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/20220601032227.4076670-3-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hillf Danton <hdanton@sina.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Change the guts of check_move_unevictable_pages() over to use folios
and add check_move_unevictable_pages() as a wrapper.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Almost all of MM here. A few things are still getting finished off,
reviewed, etc.
- Yang Shi has improved the behaviour of khugepaged collapsing of
readonly file-backed transparent hugepages.
- Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
- Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
runtime enablement of the recent huge page vmemmap optimization
feature.
- Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
- Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
- Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
- David Vernet has done some fixup work on the memcg selftests.
- Peter Xu has taught userfaultfd to handle write protection faults
against shmem- and hugetlbfs-backed files.
- More DAMON development from SeongJae Park - adding online tuning of
the feature and support for monitoring of fixed virtual address
ranges. Also easier discovery of which monitoring operations are
available.
- Nadav Amit has done some optimization of TLB flushing during
mprotect().
- Neil Brown continues to labor away at improving our swap-over-NFS
support.
- David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
- Peng Liu fixed some errors in the core hugetlb code.
- Joao Martins has reduced the amount of memory consumed by
device-dax's compound devmaps.
- Some cleanups of the arch-specific pagemap code from Anshuman
Khandual.
- Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
- Roman Gushchin has done more work on the memcg selftests.
... and, of course, many smaller fixes and cleanups. Notably, the
customary million cleanup serieses from Miaohe Lin"
* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
mm: kfence: use PAGE_ALIGNED helper
selftests: vm: add the "settings" file with timeout variable
selftests: vm: add "test_hmm.sh" to TEST_FILES
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
selftests: vm: add migration to the .gitignore
selftests/vm/pkeys: fix typo in comment
ksm: fix typo in comment
selftests: vm: add process_mrelease tests
Revert "mm/vmscan: never demote for memcg reclaim"
mm/kfence: print disabling or re-enabling message
include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
mm: fix a potential infinite loop in start_isolate_page_range()
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
zram: fix Kconfig dependency warning
mm/shmem: fix shmem folio swapoff hang
cgroup: fix an error handling path in alloc_pagecache_max_30M()
mm: damon: use HPAGE_PMD_SIZE
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
nodemask.h: fix compilation error with GCC12
...
|
|
This reverts commit 3a235693d3930e1276c8d9cc0ca5807ef292cf0a.
Its premise was that cgroup reclaim cares about freeing memory inside the
cgroup, and demotion just moves them around within the cgroup limit.
Hence, pages from toptier nodes should be reclaimed directly.
However, with NUMA balancing now doing tier promotions, demotion is part
of the page aging process. Global reclaim demotes the coldest toptier
pages to secondary memory, where their life continues and from which they
have a chance to get promoted back. Essentially, tiered memory systems
have an LRU order that spans multiple nodes.
When cgroup reclaims pages coming off the toptier directly, there can be
colder pages on lower tier nodes that were demoted by global reclaim.
This is an aging inversion, not unlike if cgroups were to reclaim directly
from the active lists while there are inactive pages.
Proactive reclaim is another factor. The goal of that it is to offload
colder pages from expensive RAM to cheaper storage. When lower tier
memory is available as an intermediate layer, we want offloading to take
advantage of it instead of bypassing to storage.
Revert the patch so that cgroups respect the LRU order spanning the memory
hierarchy.
Of note is a specific undercommit scenario, where all cgroup limits in the
system add up to <= available toptier memory. In that case, shuffling
pages out to lower tiers first to reclaim them from there is inefficient.
This is something could be optimized/short-circuited later on (although
care must be taken not to accidentally recreate the aging inversion).
Let's ensure correctness first.
Link: https://lkml.kernel.org/r/20220518190911.82400-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The rmap locks(i_mmap_rwsem and anon_vma->root->rwsem) could be contended
under memory pressure if processes keep working on their vmas(e.g., fork,
mmap, munmap). It makes reclaim path stuck. In our real workload traces,
we see kswapd is waiting the lock for 300ms+(worst case, a sec) and it
makes other processes entering direct reclaim, which were also stuck on
the lock.
This patch makes lru aging path try_lock mode like shink_page_list so the
reclaim context will keep working with next lru pages without being stuck.
if it found the rmap lock contended, it rotates the page back to head of
lru in both active/inactive lrus to make them consistent behavior, which
is basic starting point rather than adding more heristic.
Since this patch introduces a new "contended" field as out-param along
with try_lock in-param in rmap_walk_control, it's not immutable any longer
if the try_lock is set so remove const keywords on rmap related functions.
Since rmap walking is already expensive operation, I doubt the const
would help sizable benefit( And we didn't have it until 5.17).
In a heavy app workload in Android, trace shows following statistics. It
almost removes rmap lock contention from reclaim path.
Martin Liu reported:
Before:
max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function
1632 0 1631 151.542173 31672 209 page_lock_anon_vma_read
601 0 601 145.544681 28817 198 rmap_walk_file
After:
max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function
NaN NaN NaN NaN NaN 0.0 NaN
0 0 0 0.127645 1 12 rmap_walk_file
[minchan@kernel.org: add comment, per Matthew]
Link: https://lkml.kernel.org/r/YnNqeB5tUf6LZ57b@google.com
Link: https://lkml.kernel.org/r/20220510215423.164547-1-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: John Dias <joaodias@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Martin Liu <liumartin@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
These are all straightforward conversions to the folio API.
Link: https://lkml.kernel.org/r/20220504182857.4013401-16-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This accounts the number of pages activated correctly for large folios.
Link: https://lkml.kernel.org/r/20220504182857.4013401-14-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that we don't interrogate the BDI for congestion, we can delay looking
up the folio's mapping until we've got further through the function,
reducing register pressure and saving a call to folio_mapping for folios
we're adding to the swap cache.
Link: https://lkml.kernel.org/r/20220504182857.4013401-13-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove a hidden call to compound_head(), and account nr_pages instead of a
single page. This matches the code in lru_lazyfree_fn() that accounts
nr_pages to PGLAZYFREE.
Link: https://lkml.kernel.org/r/20220504182857.4013401-12-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
