summaryrefslogtreecommitdiff
path: root/mm/madvise.c
AgeCommit message (Collapse)AuthorFilesLines
2020-04-24mm: check that mm is still valid in madvise()Linus Torvalds1-0/+18
IORING_OP_MADVISE can end up basically doing mprotect() on the VM of another process, which means that it can race with our crazy core dump handling which accesses the VM state without holding the mmap_sem (because it incorrectly thinks that it is the final user). This is clearly a core dumping problem, but we've never fixed it the right way, and instead have the notion of "check that the mm is still ok" using mmget_still_valid() after getting the mmap_sem for writing in any situation where we're not the original VM thread. See commit 04f5866e41fb ("coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping") for more background on this whole mmget_still_valid() thing. You might want to have a barf bag handy when you do. We're discussing just fixing this properly in the only remaining core dumping routines. But even if we do that, let's make do_madvise() do the right thing, and then when we fix core dumping, we can remove all these mmget_still_valid() checks. Reported-and-tested-by: Jann Horn <jannh@google.com> Fixes: c1ca757bd6f4 ("io_uring: add IORING_OP_MADVISE") Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-22mm: do not allow MADV_PAGEOUT for CoW pagesMichal Hocko1-3/+9
Jann has brought up a very interesting point [1]. While shared pages are excluded from MADV_PAGEOUT normally, CoW pages can be easily reclaimed that way. This can lead to all sorts of hard to debug problems. E.g. performance problems outlined by Daniel [2]. There are runtime environments where there is a substantial memory shared among security domains via CoW memory and a easy to reclaim way of that memory, which MADV_{COLD,PAGEOUT} offers, can lead to either performance degradation in for the parent process which might be more privileged or even open side channel attacks. The feasibility of the latter is not really clear to me TBH but there is no real reason for exposure at this stage. It seems there is no real use case to depend on reclaiming CoW memory via madvise at this stage so it is much easier to simply disallow it and this is what this patch does. Put it simply MADV_{PAGEOUT,COLD} can operate only on the exclusively owned memory which is a straightforward semantic. [1] http://lkml.kernel.org/r/CAG48ez0G3JkMq61gUmyQAaCq=_TwHbi1XKzWRooxZkv08PQKuw@mail.gmail.com [2] http://lkml.kernel.org/r/CAKOZueua_v8jHCpmEtTB6f3i9e2YnmX4mqdYVWhV4E=Z-n+zRQ@mail.gmail.com Fixes: 9c276cc65a58 ("mm: introduce MADV_COLD") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Minchan Kim <minchan@kernel.org> Cc: Daniel Colascione <dancol@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200312082248.GS23944@dhcp22.suse.cz Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-21mm: make do_madvise() available internallyJens Axboe1-1/+6
This is in preparation for enabling this functionality through io_uring. Add a helper that is just exporting what sys_madvise() does, and have the system call use it. No functional changes in this patch. Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-01mm/madvise.c: use PAGE_ALIGN[ED] for range checkingWei Yang1-2/+2
Improve readability, no functional change. Link: http://lkml.kernel.org/r/20191118032857.22683-1-richardw.yang@linux.intel.com Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01mm/madvise.c: replace with page_size() in madvise_inject_error()Yunfeng Ye1-4/+4
page_size() is supported after the commit a50b854e073c ("mm: introduce page_size()"). Use page_size() in madvise_inject_error() for readability. [akpm@linux-foundation.org: use ulong for `size', per David] Link: http://lkml.kernel.org/r/29dce60c-38d6-0220-f292-e298f0c78c4d@huawei.com Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Rientjes <rientjes@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Hu Shiyuan <hushiyuan@huawei.com> Cc: Feilong Lin <linfeilong@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01mm, soft-offline: convert parameter to pfnNaoya Horiguchi1-1/+1
Currently soft_offline_page() receives struct page, and its sibling memory_failure() receives pfn. This discrepancy looks weird and makes precheck on pfn validity tricky. So let's align them. Link: http://lkml.kernel.org/r/20191016234706.GA5493@www9186uo.sakura.ne.jp Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-16mm: fix trying to reclaim unevictable lru page when calling madvise_pageoutzhong jiang1-4/+12
Recently, I hit the following issue when running upstream. kernel BUG at mm/vmscan.c:1521! invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 0 PID: 23385 Comm: syz-executor.6 Not tainted 5.4.0-rc4+ #1 RIP: 0010:shrink_page_list+0x12b6/0x3530 mm/vmscan.c:1521 Call Trace: reclaim_pages+0x499/0x800 mm/vmscan.c:2188 madvise_cold_or_pageout_pte_range+0x58a/0x710 mm/madvise.c:453 walk_pmd_range mm/pagewalk.c:53 [inline] walk_pud_range mm/pagewalk.c:112 [inline] walk_p4d_range mm/pagewalk.c:139 [inline] walk_pgd_range mm/pagewalk.c:166 [inline] __walk_page_range+0x45a/0xc20 mm/pagewalk.c:261 walk_page_range+0x179/0x310 mm/pagewalk.c:349 madvise_pageout_page_range mm/madvise.c:506 [inline] madvise_pageout+0x1f0/0x330 mm/madvise.c:542 madvise_vma mm/madvise.c:931 [inline] __do_sys_madvise+0x7d2/0x1600 mm/madvise.c:1113 do_syscall_64+0x9f/0x4c0 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe madvise_pageout() accesses the specified range of the vma and isolates them, then runs shrink_page_list() to reclaim its memory. But it also isolates the unevictable pages to reclaim. Hence, we can catch the cases in shrink_page_list(). The root cause is that we scan the page tables instead of specific LRU list. and so we need to filter out the unevictable lru pages from our end. Link: http://lkml.kernel.org/r/1572616245-18946-1-git-send-email-zhongjiang@huawei.com Fixes: 1a4e58cce84e ("mm: introduce MADV_PAGEOUT") Signed-off-by: zhong jiang <zhongjiang@huawei.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-26mm: factor out common parts between MADV_COLD and MADV_PAGEOUTMinchan Kim1-147/+45
There are many common parts between MADV_COLD and MADV_PAGEOUT. This patch factor them out to save code duplication. Link: http://lkml.kernel.org/r/20190726023435.214162-6-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Colascione <dancol@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: kbuild test robot <lkp@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Oleksandr Natalenko <oleksandr@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Shakeel Butt <shakeelb@google.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tim Murray <timmurray@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-26mm: introduce MADV_PAGEOUTMinchan Kim1-0/+189
When a process expects no accesses to a certain memory range for a long time, it could hint kernel that the pages can be reclaimed instantly but data should be preserved for future use. This could reduce workingset eviction so it ends up increasing performance. This patch introduces the new MADV_PAGEOUT hint to madvise(2) syscall. MADV_PAGEOUT can be used by a process to mark a memory range as not expected to be used for a long time so that kernel reclaims *any LRU* pages instantly. The hint can help kernel in deciding which pages to evict proactively. A note: It doesn't apply SWAP_CLUSTER_MAX LRU page isolation limit intentionally because it's automatically bounded by PMD size. If PMD size(e.g., 256) makes some trouble, we could fix it later by limit it to SWAP_CLUSTER_MAX[1]. - man-page material MADV_PAGEOUT (since Linux x.x) Do not expect access in the near future so pages in the specified regions could be reclaimed instantly regardless of memory pressure. Thus, access in the range after successful operation could cause major page fault but never lose the up-to-date contents unlike MADV_DONTNEED. Pages belonging to a shared mapping are only processed if a write access is allowed for the calling process. MADV_PAGEOUT cannot be applied to locked pages, Huge TLB pages, or VM_PFNMAP pages. [1] https://lore.kernel.org/lkml/20190710194719.GS29695@dhcp22.suse.cz/ [minchan@kernel.org: clear PG_active on MADV_PAGEOUT] Link: http://lkml.kernel.org/r/20190802200643.GA181880@google.com [akpm@linux-foundation.org: resolve conflicts with hmm.git] Link: http://lkml.kernel.org/r/20190726023435.214162-5-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Colascione <dancol@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Oleksandr Natalenko <oleksandr@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tim Murray <timmurray@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-26mm: introduce MADV_COLDMinchan Kim1-2/+177
Patch series "Introduce MADV_COLD and MADV_PAGEOUT", v7. - Background The Android terminology used for forking a new process and starting an app from scratch is a cold start, while resuming an existing app is a hot start. While we continually try to improve the performance of cold starts, hot starts will always be significantly less power hungry as well as faster so we are trying to make hot start more likely than cold start. To increase hot start, Android userspace manages the order that apps should be killed in a process called ActivityManagerService. ActivityManagerService tracks every Android app or service that the user could be interacting with at any time and translates that into a ranked list for lmkd(low memory killer daemon). They are likely to be killed by lmkd if the system has to reclaim memory. In that sense they are similar to entries in any other cache. Those apps are kept alive for opportunistic performance improvements but those performance improvements will vary based on the memory requirements of individual workloads. - Problem Naturally, cached apps were dominant consumers of memory on the system. However, they were not significant consumers of swap even though they are good candidate for swap. Under investigation, swapping out only begins once the low zone watermark is hit and kswapd wakes up, but the overall allocation rate in the system might trip lmkd thresholds and cause a cached process to be killed(we measured performance swapping out vs. zapping the memory by killing a process. Unsurprisingly, zapping is 10x times faster even though we use zram which is much faster than real storage) so kill from lmkd will often satisfy the high zone watermark, resulting in very few pages actually being moved to swap. - Approach The approach we chose was to use a new interface to allow userspace to proactively reclaim entire processes by leveraging platform information. This allowed us to bypass the inaccuracy of the kernel’s LRUs for pages that are known to be cold from userspace and to avoid races with lmkd by reclaiming apps as soon as they entered the cached state. Additionally, it could provide many chances for platform to use much information to optimize memory efficiency. To achieve the goal, the patchset introduce two new options for madvise. One is MADV_COLD which will deactivate activated pages and the other is MADV_PAGEOUT which will reclaim private pages instantly. These new options complement MADV_DONTNEED and MADV_FREE by adding non-destructive ways to gain some free memory space. MADV_PAGEOUT is similar to MADV_DONTNEED in a way that it hints the kernel that memory region is not currently needed and should be reclaimed immediately; MADV_COLD is similar to MADV_FREE in a way that it hints the kernel that memory region is not currently needed and should be reclaimed when memory pressure rises. This patch (of 5): When a process expects no accesses to a certain memory range, it could give a hint to kernel that the pages can be reclaimed when memory pressure happens but data should be preserved for future use. This could reduce workingset eviction so it ends up increasing performance. This patch introduces the new MADV_COLD hint to madvise(2) syscall. MADV_COLD can be used by a process to mark a memory range as not expected to be used in the near future. The hint can help kernel in deciding which pages to evict early during memory pressure. It works for every LRU pages like MADV_[DONTNEED|FREE]. IOW, It moves active file page -> inactive file LRU active anon page -> inacdtive anon LRU Unlike MADV_FREE, it doesn't move active anonymous pages to inactive file LRU's head because MADV_COLD is a little bit different symantic. MADV_FREE means it's okay to discard when the memory pressure because the content of the page is *garbage* so freeing such pages is almost zero overhead since we don't need to swap out and access afterward causes just minor fault. Thus, it would make sense to put those freeable pages in inactive file LRU to compete other used-once pages. It makes sense for implmentaion point of view, too because it's not swapbacked memory any longer until it would be re-dirtied. Even, it could give a bonus to make them be reclaimed on swapless system. However, MADV_COLD doesn't mean garbage so reclaiming them requires swap-out/in in the end so it's bigger cost. Since we have designed VM LRU aging based on cost-model, anonymous cold pages would be better to position inactive anon's LRU list, not file LRU. Furthermore, it would help to avoid unnecessary scanning if system doesn't have a swap device. Let's start simpler way without adding complexity at this moment. However, keep in mind, too that it's a caveat that workloads with a lot of pages cache are likely to ignore MADV_COLD on anonymous memory because we rarely age anonymous LRU lists. * man-page material MADV_COLD (since Linux x.x) Pages in the specified regions will be treated as less-recently-accessed compared to pages in the system with similar access frequencies. In contrast to MADV_FREE, the contents of the region are preserved regardless of subsequent writes to pages. MADV_COLD cannot be applied to locked pages, Huge TLB pages, or VM_PFNMAP pages. [akpm@linux-foundation.org: resolve conflicts with hmm.git] Link: http://lkml.kernel.org/r/20190726023435.214162-2-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Chris Zankel <chris@zankel.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Daniel Colascione <dancol@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Oleksandr Natalenko <oleksandr@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tim Murray <timmurray@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-26mm: untag user pointers passed to memory syscallsAndrey Konovalov1-0/+2
This patch is a part of a series that extends kernel ABI to allow to pass tagged user pointers (with the top byte set to something else other than 0x00) as syscall arguments. This patch allows tagged pointers to be passed to the following memory syscalls: get_mempolicy, madvise, mbind, mincore, mlock, mlock2, mprotect, mremap, msync, munlock, move_pages. The mmap and mremap syscalls do not currently accept tagged addresses. Architectures may interpret the tag as a background colour for the corresponding vma. Link: http://lkml.kernel.org/r/aaf0c0969d46b2feb9017f3e1b3ef3970b633d91.1563904656.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Eric Auger <eric.auger@redhat.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25mm/madvise: reduce code duplication in error handling pathsMike Rapoport1-36/+16
madvise_behavior() converts -ENOMEM to -EAGAIN in several places using identical code. Move that code to a common error handling path. No functional changes. Link: http://lkml.kernel.org/r/1564640896-1210-1-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-21Merge tag 'for-linus-hmm' of ↵Linus Torvalds1-29/+13
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull hmm updates from Jason Gunthorpe: "This is more cleanup and consolidation of the hmm APIs and the very strongly related mmu_notifier interfaces. Many places across the tree using these interfaces are touched in the process. Beyond that a cleanup to the page walker API and a few memremap related changes round out the series: - General improvement of hmm_range_fault() and related APIs, more documentation, bug fixes from testing, API simplification & consolidation, and unused API removal - Simplify the hmm related kconfigs to HMM_MIRROR and DEVICE_PRIVATE, and make them internal kconfig selects - Hoist a lot of code related to mmu notifier attachment out of drivers by using a refcount get/put attachment idiom and remove the convoluted mmu_notifier_unregister_no_release() and related APIs. - General API improvement for the migrate_vma API and revision of its only user in nouveau - Annotate mmu_notifiers with lockdep and sleeping region debugging Two series unrelated to HMM or mmu_notifiers came along due to dependencies: - Allow pagemap's memremap_pages family of APIs to work without providing a struct device - Make walk_page_range() and related use a constant structure for function pointers" * tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (75 commits) libnvdimm: Enable unit test infrastructure compile checks mm, notifier: Catch sleeping/blocking for !blockable kernel.h: Add non_block_start/end() drm/radeon: guard against calling an unpaired radeon_mn_unregister() csky: add missing brackets in a macro for tlb.h pagewalk: use lockdep_assert_held for locking validation pagewalk: separate function pointers from iterator data mm: split out a new pagewalk.h header from mm.h mm/mmu_notifiers: annotate with might_sleep() mm/mmu_notifiers: prime lockdep mm/mmu_notifiers: add a lockdep map for invalidate_range_start/end mm/mmu_notifiers: remove the __mmu_notifier_invalidate_range_start/end exports mm/hmm: hmm_range_fault() infinite loop mm/hmm: hmm_range_fault() NULL pointer bug mm/hmm: fix hmm_range_fault()'s handling of swapped out pages mm/mmu_notifiers: remove unregister_no_release RDMA/odp: remove ib_ucontext from ib_umem RDMA/odp: use mmu_notifier_get/put for 'struct ib_ucontext_per_mm' RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr RDMA/mlx5: Use ib_umem_start instead of umem.address ...
2019-09-07pagewalk: separate function pointers from iterator dataChristoph Hellwig1-29/+12
The mm_walk structure currently mixed data and code. Split out the operations vectors into a new mm_walk_ops structure, and while we are changing the API also declare the mm_walk structure inside the walk_page_range and walk_page_vma functions. Based on patch from Linus Torvalds. Link: https://lore.kernel.org/r/20190828141955.22210-3-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-07mm: split out a new pagewalk.h header from mm.hChristoph Hellwig1-0/+1
Add a new header for the two handful of users of the walk_page_range / walk_page_vma interface instead of polluting all users of mm.h with it. Link: https://lore.kernel.org/r/20190828141955.22210-2-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-31mm: Handle MADV_WILLNEED through vfs_fadvise()Jan Kara1-6/+16
Currently handling of MADV_WILLNEED hint calls directly into readahead code. Handle it by calling vfs_fadvise() instead so that filesystem can use its ->fadvise() callback to acquire necessary locks or otherwise prepare for the request. Suggested-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Boaz Harrosh <boazh@netapp.com> CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-07-02mm: remove MEMORY_DEVICE_PUBLIC supportChristoph Hellwig1-1/+1
The code hasn't been used since it was added to the tree, and doesn't appear to actually be usable. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-14mm/mmu_notifier: use correct mmu_notifier events for each invalidationJérôme Glisse1-1/+1
This updates each existing invalidation to use the correct mmu notifier event that represent what is happening to the CPU page table. See the patch which introduced the events to see the rational behind this. Link: http://lkml.kernel.org/r/20190326164747.24405-7-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Christian König <christian.koenig@amd.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14mm/mmu_notifier: contextual information for event triggering invalidationJérôme Glisse1-1/+2
CPU page table update can happens for many reasons, not only as a result of a syscall (munmap(), mprotect(), mremap(), madvise(), ...) but also as a result of kernel activities (memory compression, reclaim, migration, ...). Users of mmu notifier API track changes to the CPU page table and take specific action for them. While current API only provide range of virtual address affected by the change, not why the changes is happening. This patchset do the initial mechanical convertion of all the places that calls mmu_notifier_range_init to also provide the default MMU_NOTIFY_UNMAP event as well as the vma if it is know (most invalidation happens against a given vma). Passing down the vma allows the users of mmu notifier to inspect the new vma page protection. The MMU_NOTIFY_UNMAP is always the safe default as users of mmu notifier should assume that every for the range is going away when that event happens. A latter patch do convert mm call path to use a more appropriate events for each call. This is done as 2 patches so that no call site is forgotten especialy as it uses this following coccinelle patch: %<---------------------------------------------------------------------- @@ identifier I1, I2, I3, I4; @@ static inline void mmu_notifier_range_init(struct mmu_notifier_range *I1, +enum mmu_notifier_event event, +unsigned flags, +struct vm_area_struct *vma, struct mm_struct *I2, unsigned long I3, unsigned long I4) { ... } @@ @@ -#define mmu_notifier_range_init(range, mm, start, end) +#define mmu_notifier_range_init(range, event, flags, vma, mm, start, end) @@ expression E1, E3, E4; identifier I1; @@ <... mmu_notifier_range_init(E1, +MMU_NOTIFY_UNMAP, 0, I1, I1->vm_mm, E3, E4) ...> @@ expression E1, E2, E3, E4; identifier FN, VMA; @@ FN(..., struct vm_area_struct *VMA, ...) { <... mmu_notifier_range_init(E1, +MMU_NOTIFY_UNMAP, 0, VMA, E2, E3, E4) ...> } @@ expression E1, E2, E3, E4; identifier FN, VMA; @@ FN(...) { struct vm_area_struct *VMA; <... mmu_notifier_range_init(E1, +MMU_NOTIFY_UNMAP, 0, VMA, E2, E3, E4) ...> } @@ expression E1, E2, E3, E4; identifier FN; @@ FN(...) { <... mmu_notifier_range_init(E1, +MMU_NOTIFY_UNMAP, 0, NULL, E2, E3, E4) ...> } ---------------------------------------------------------------------->% Applied with: spatch --all-includes --sp-file mmu-notifier.spatch fs/proc/task_mmu.c --in-place spatch --sp-file mmu-notifier.spatch --dir kernel/events/ --in-place spatch --sp-file mmu-notifier.spatch --dir mm --in-place Link: http://lkml.kernel.org/r/20190326164747.24405-6-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Christian König <christian.koenig@amd.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-03asm-generic/tlb, arch: Provide CONFIG_HAVE_MMU_GATHER_PAGE_SIZEPeter Zijlstra1-1/+1
Move the mmu_gather::page_size things into the generic code instead of PowerPC specific bits. No change in behavior intended. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nick Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-28mm/mmu_notifier: use structure for invalidate_range_start/end calls v2Jérôme Glisse1-10/+11
To avoid having to change many call sites everytime we want to add a parameter use a structure to group all parameters for the mmu_notifier invalidate_range_start/end cakks. No functional changes with this patch. [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181205053628.3210-3-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Felix Kuehling <felix.kuehling@amd.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> From: Jérôme Glisse <jglisse@redhat.com> Subject: mm/mmu_notifier: use structure for invalidate_range_start/end calls v3 fix build warning in migrate.c when CONFIG_MMU_NOTIFIER=n Link: http://lkml.kernel.org/r/20181213171330.8489-3-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-28Merge branch 'xarray' of git://git.infradead.org/users/willy/linux-daxLinus Torvalds1-1/+1
Pull XArray conversion from Matthew Wilcox: "The XArray provides an improved interface to the radix tree data structure, providing locking as part of the API, specifying GFP flags at allocation time, eliminating preloading, less re-walking the tree, more efficient iterations and not exposing RCU-protected pointers to its users. This patch set 1. Introduces the XArray implementation 2. Converts the pagecache to use it 3. Converts memremap to use it The page cache is the most complex and important user of the radix tree, so converting it was most important. Converting the memremap code removes the only other user of the multiorder code, which allows us to remove the radix tree code that supported it. I have 40+ followup patches to convert many other users of the radix tree over to the XArray, but I'd like to get this part in first. The other conversions haven't been in linux-next and aren't suitable for applying yet, but you can see them in the xarray-conv branch if you're interested" * 'xarray' of git://git.infradead.org/users/willy/linux-dax: (90 commits) radix tree: Remove multiorder support radix tree test: Convert multiorder tests to XArray radix tree tests: Convert item_delete_rcu to XArray radix tree tests: Convert item_kill_tree to XArray radix tree tests: Move item_insert_order radix tree test suite: Remove multiorder benchmarking radix tree test suite: Remove __item_insert memremap: Convert to XArray xarray: Add range store functionality xarray: Move multiorder_check to in-kernel tests xarray: Move multiorder_shrink to kernel tests xarray: Move multiorder account test in-kernel radix tree test suite: Convert iteration test to XArray radix tree test suite: Convert tag_tagged_items to XArray radix tree: Remove radix_tree_clear_tags radix tree: Remove radix_tree_maybe_preload_order radix tree: Remove split/join code radix tree: Remove radix_tree_update_node_t page cache: Finish XArray conversion dax: Convert page fault handlers to XArray ...
2018-10-06mm: madvise(MADV_DODUMP): allow hugetlbfs pagesDaniel Black1-1/+1
Reproducer, assuming 2M of hugetlbfs available: Hugetlbfs mounted, size=2M and option user=testuser # mount | grep ^hugetlbfs hugetlbfs on /dev/hugepages type hugetlbfs (rw,pagesize=2M,user=dan) # sysctl vm.nr_hugepages=1 vm.nr_hugepages = 1 # grep Huge /proc/meminfo AnonHugePages: 0 kB ShmemHugePages: 0 kB HugePages_Total: 1 HugePages_Free: 1 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB Hugetlb: 2048 kB Code: #include <sys/mman.h> #include <stddef.h> #define SIZE 2*1024*1024 int main() { void *ptr; ptr = mmap(NULL, SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_HUGETLB | MAP_ANONYMOUS, -1, 0); madvise(ptr, SIZE, MADV_DONTDUMP); madvise(ptr, SIZE, MADV_DODUMP); } Compile and strace: mmap(NULL, 2097152, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_HUGETLB, -1, 0) = 0x7ff7c9200000 madvise(0x7ff7c9200000, 2097152, MADV_DONTDUMP) = 0 madvise(0x7ff7c9200000, 2097152, MADV_DODUMP) = -1 EINVAL (Invalid argument) hugetlbfs pages have VM_DONTEXPAND in the VmFlags driver pages based on author testing with analysis from Florian Weimer[1]. The inclusion of VM_DONTEXPAND into the VM_SPECIAL defination was a consequence of the large useage of VM_DONTEXPAND in device drivers. A consequence of [2] is that VM_DONTEXPAND marked pages are unable to be marked DODUMP. A user could quite legitimately madvise(MADV_DONTDUMP) their hugetlbfs memory for a while and later request that madvise(MADV_DODUMP) on the same memory. We correct this omission by allowing madvice(MADV_DODUMP) on hugetlbfs pages. [1] https://stackoverflow.com/questions/52548260/madvisedodump-on-the-same-ptr-size-as-a-successful-madvisedontdump-fails-wit [2] commit 0103bd16fb90 ("mm: prepare VM_DONTDUMP for using in drivers") Link: http://lkml.kernel.org/r/20180930054629.29150-1-daniel@linux.ibm.com Link: https://lists.launchpad.net/maria-discuss/msg05245.html Fixes: 0103bd16fb90 ("mm: prepare VM_DONTDUMP for using in drivers") Reported-by: Kenneth Penza <kpenza@gmail.com> Signed-off-by: Daniel Black <daniel@linux.ibm.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-30xarray: Replace exceptional entriesMatthew Wilcox1-1/+1
Introduce xarray value entries and tagged pointers to replace radix tree exceptional entries. This is a slight change in encoding to allow the use of an extra bit (we can now store BITS_PER_LONG - 1 bits in a value entry). It is also a change in emphasis; exceptional entries are intimidating and different. As the comment explains, you can choose to store values or pointers in the xarray and they are both first-class citizens. Signed-off-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Josef Bacik <jbacik@fb.com>
2018-07-23mm, madvise_inject_error: Let memory_failure() optionally take a page referenceDan Williams1-3/+13
The madvise_inject_error() routine uses get_user_pages() to lookup the pfn and other information for injected error, but it does not release that pin. The assumption is that failed pages should be taken out of circulation. However, for dax mappings it is not possible to take pages out of circulation since they are 1:1 physically mapped as filesystem blocks, or device-dax capacity. They also typically represent persistent memory which has an error clearing capability. In preparation for adding a special handler for dax mappings, shift the responsibility of taking the page reference to memory_failure(). I.e. drop the page reference and do not specify MF_COUNT_INCREASED to memory_failure(). Cc: Michal Hocko <mhocko@suse.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2018-01-23mm/memory_failure: Remove unused trapno from memory_failureEric W. Biederman1-1/+1
Today 4 architectures set ARCH_SUPPORTS_MEMORY_FAILURE (arm64, parisc, powerpc, and x86), while 4 other architectures set __ARCH_SI_TRAPNO (alpha, metag, sparc, and tile). These two sets of architectures do not interesect so remove the trapno paramater to remove confusion. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-11-30mm/madvise.c: fix madvise() infinite loop under special circumstanceschenjie1-3/+1
MADVISE_WILLNEED has always been a noop for DAX (formerly XIP) mappings. Unfortunately madvise_willneed() doesn't communicate this information properly to the generic madvise syscall implementation. The calling convention is quite subtle there. madvise_vma() is supposed to either return an error or update &prev otherwise the main loop will never advance to the next vma and it will keep looping for ever without a way to get out of the kernel. It seems this has been broken since introduction. Nobody has noticed because nobody seems to be using MADVISE_WILLNEED on these DAX mappings. [mhocko@suse.com: rewrite changelog] Link: http://lkml.kernel.org/r/20171127115318.911-1-guoxuenan@huawei.com Fixes: fe77ba6f4f97 ("[PATCH] xip: madvice/fadvice: execute in place") Signed-off-by: chenjie <chenjie6@huawei.com> Signed-off-by: guoxuenan <guoxuenan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: zhangyi (F) <yi.zhang@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Shaohua Li <shli@fb.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-14mm/madvise.c: add description for MADV_WIPEONFORK and MADV_KEEPONFORKYang Shi1-1/+6
mm/madvise.c has a brief description about all MADV_ flags. Add a description for the newly added MADV_WIPEONFORK and MADV_KEEPONFORK. Although man page has the similar information, but it'd better to keep the consistent with other flags. Link: http://lkml.kernel.org/r/1506117328-88228-1-git-send-email-yang.s@alibaba-inc.com Signed-off-by: Yang Shi <yang.s@alibaba-inc.com> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-04mm, hugetlb, soft_offline: save compound page order before page migrationAlexandru Moise1-2/+10
This fixes a bug in madvise() where if you'd try to soft offline a hugepage via madvise(), while walking the address range you'd end up, using the wrong page offset due to attempting to get the compound order of a former but presently not compound page, due to dissolving the huge page (since commit c3114a84f7f9: "mm: hugetlb: soft-offline: dissolve source hugepage after successful migration"). As a result I ended up with all my free pages except one being offlined. Link: http://lkml.kernel.org/r/20170912204306.GA12053@gmail.com Fixes: c3114a84f7f9 ("mm: hugetlb: soft-offline: dissolve source hugepage after successful migration") Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hillf Danton <hdanton@sina.com> Cc: Shaohua Li <shli@fb.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-09mm/device-public-memory: device memory cache coherent with CPUJérôme Glisse1-1/+1
Platform with advance system bus (like CAPI or CCIX) allow device memory to be accessible from CPU in a cache coherent fashion. Add a new type of ZONE_DEVICE to represent such memory. The use case are the same as for the un-addressable device memory but without all the corners cases. Link: http://lkml.kernel.org/r/20170817000548.32038-19-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07mm,fork: introduce MADV_WIPEONFORKRik van Riel1-0/+13
Introduce MADV_WIPEONFORK semantics, which result in a VMA being empty in the child process after fork. This differs from MADV_DONTFORK in one important way. If a child process accesses memory that was MADV_WIPEONFORK, it will get zeroes. The address ranges are still valid, they are just empty. If a child process accesses memory that was MADV_DONTFORK, it will get a segmentation fault, since those address ranges are no longer valid in the child after fork. Since MADV_DONTFORK also seems to be used to allow very large programs to fork in systems with strict memory overcommit restrictions, changing the semantics of MADV_DONTFORK might break existing programs. MADV_WIPEONFORK only works on private, anonymous VMAs. The use case is libraries that store or cache information, and want to know that they need to regenerate it in the child process after fork. Examples of this would be: - systemd/pulseaudio API checks (fail after fork) (replacing a getpid check, which is too slow without a PID cache) - PKCS#11 API reinitialization check (mandated by specification) - glibc's upcoming PRNG (reseed after fork) - OpenSSL PRNG (reseed after fork) The security benefits of a forking server having a re-inialized PRNG in every child process are pretty obvious. However, due to libraries having all kinds of internal state, and programs getting compiled with many different versions of each library, it is unreasonable to expect calling programs to re-initialize everything manually after fork. A further complication is the proliferation of clone flags, programs bypassing glibc's functions to call clone directly, and programs calling unshare, causing the glibc pthread_atfork hook to not get called. It would be better to have the kernel take care of this automatically. The patch also adds MADV_KEEPONFORK, to undo the effects of a prior MADV_WIPEONFORK. This is similar to the OpenBSD minherit syscall with MAP_INHERIT_ZERO: https://man.openbsd.org/minherit.2 [akpm@linux-foundation.org: numerically order arch/parisc/include/uapi/asm/mman.h #defines] Link: http://lkml.kernel.org/r/20170811212829.29186-3-riel@redhat.com Signed-off-by: Rik van Riel <riel@redhat.com> Reported-by: Florian Weimer <fweimer@redhat.com> Reported-by: Colm MacCártaigh <colm@allcosts.net> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: Kees Cook <keescook@chromium.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Cc: <linux-api@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-01mm, madvise: ensure poisoned pages are removed from per-cpu listsMel Gorman1-0/+6
Wendy Wang reported off-list that a RAS HWPOISON-SOFT test case failed and bisected it to the commit 479f854a207c ("mm, page_alloc: defer debugging checks of pages allocated from the PCP"). The problem is that a page that was poisoned with madvise() is reused. The commit removed a check that would trigger if DEBUG_VM was enabled but re-enabling the check only fixes the problem as a side-effect by printing a bad_page warning and recovering. The root of the problem is that an madvise() can leave a poisoned page on the per-cpu list. This patch drains all per-cpu lists after pages are poisoned so that they will not be reused. Wendy reports that the test case in question passes with this patch applied. While this could be done in a targeted fashion, it is over-complicated for such a rare operation. Link: http://lkml.kernel.org/r/20170828133414.7qro57jbepdcyz5x@techsingularity.net Fixes: 479f854a207c ("mm, page_alloc: defer debugging checks of pages allocated from the PCP") Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reported-by: Wang, Wendy <wendy.wang@intel.com> Tested-by: Wang, Wendy <wendy.wang@intel.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Hansen, Dave" <dave.hansen@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-26mm/madvise.c: fix freeing of locked page with MADV_FREEEric Biggers1-1/+1
If madvise(..., MADV_FREE) split a transparent hugepage, it called put_page() before unlock_page(). This was wrong because put_page() can free the page, e.g. if a concurrent madvise(..., MADV_DONTNEED) has removed it from the memory mapping. put_page() then rightfully complained about freeing a locked page. Fix this by moving the unlock_page() before put_page(). This bug was found by syzkaller, which encountered the following splat: BUG: Bad page state in process syzkaller412798 pfn:1bd800 page:ffffea0006f60000 count:0 mapcount:0 mapping: (null) index:0x20a00 flags: 0x200000000040019(locked|uptodate|dirty|swapbacked) raw: 0200000000040019 0000000000000000 0000000000020a00 00000000ffffffff raw: ffffea0006f60020 ffffea0006f60020 0000000000000000 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set bad because of flags: 0x1(locked) Modules linked in: CPU: 1 PID: 3037 Comm: syzkaller412798 Not tainted 4.13.0-rc5+ #35 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 bad_page+0x230/0x2b0 mm/page_alloc.c:565 free_pages_check_bad+0x1f0/0x2e0 mm/page_alloc.c:943 free_pages_check mm/page_alloc.c:952 [inline] free_pages_prepare mm/page_alloc.c:1043 [inline] free_pcp_prepare mm/page_alloc.c:1068 [inline] free_hot_cold_page+0x8cf/0x12b0 mm/page_alloc.c:2584 __put_single_page mm/swap.c:79 [inline] __put_page+0xfb/0x160 mm/swap.c:113 put_page include/linux/mm.h:814 [inline] madvise_free_pte_range+0x137a/0x1ec0 mm/madvise.c:371 walk_pmd_range mm/pagewalk.c:50 [inline] walk_pud_range mm/pagewalk.c:108 [inline] walk_p4d_range mm/pagewalk.c:134 [inline] walk_pgd_range mm/pagewalk.c:160 [inline] __walk_page_range+0xc3a/0x1450 mm/pagewalk.c:249 walk_page_range+0x200/0x470 mm/pagewalk.c:326 madvise_free_page_range.isra.9+0x17d/0x230 mm/madvise.c:444 madvise_free_single_vma+0x353/0x580 mm/madvise.c:471 madvise_dontneed_free mm/madvise.c:555 [inline] madvise_vma mm/madvise.c:664 [inline] SYSC_madvise mm/madvise.c:832 [inline] SyS_madvise+0x7d3/0x13c0 mm/madvise.c:760 entry_SYSCALL_64_fastpath+0x1f/0xbe Here is a C reproducer: #define _GNU_SOURCE #include <pthread.h> #include <sys/mman.h> #include <unistd.h> #define MADV_FREE 8 #define PAGE_SIZE 4096 static void *mapping; static const size_t mapping_size = 0x1000000; static void *madvise_thrproc(void *arg) { madvise(mapping, mapping_size, (long)arg); } int main(void) { pthread_t t[2]; for (;;) { mapping = mmap(NULL, mapping_size, PROT_WRITE, MAP_POPULATE|MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); munmap(mapping + mapping_size / 2, PAGE_SIZE); pthread_create(&t[0], 0, madvise_thrproc, (void*)MADV_DONTNEED); pthread_create(&t[1], 0, madvise_thrproc, (void*)MADV_FREE); pthread_join(t[0], NULL); pthread_join(t[1], NULL); munmap(mapping, mapping_size); } } Note: to see the splat, CONFIG_TRANSPARENT_HUGEPAGE=y and CONFIG_DEBUG_VM=y are needed. Google Bug Id: 64696096 Link: http://lkml.kernel.org/r/20170823205235.132061-1-ebiggers3@gmail.com Fixes: 854e9ed09ded ("mm: support madvise(MADV_FREE)") Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [v4.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-03mm, mprotect: flush TLB if potentially racing with a parallel reclaim ↵Mel Gorman1-0/+1
leaving stale TLB entries Nadav Amit identified a theoritical race between page reclaim and mprotect due to TLB flushes being batched outside of the PTL being held. He described the race as follows: CPU0 CPU1 ---- ---- user accesses memory using RW PTE [PTE now cached in TLB] try_to_unmap_one() ==> ptep_get_and_clear() ==> set_tlb_ubc_flush_pending() mprotect(addr, PROT_READ) ==> change_pte_range() ==> [ PTE non-present - no flush ] user writes using cached RW PTE ... try_to_unmap_flush() The same type of race exists for reads when protecting for PROT_NONE and also exists for operations that can leave an old TLB entry behind such as munmap, mremap and madvise. For some operations like mprotect, it's not necessarily a data integrity issue but it is a correctness issue as there is a window where an mprotect that limits access still allows access. For munmap, it's potentially a data integrity issue although the race is massive as an munmap, mmap and return to userspace must all complete between the window when reclaim drops the PTL and flushes the TLB. However, it's theoritically possible so handle this issue by flushing the mm if reclaim is potentially currently batching TLB flushes. Other instances where a flush is required for a present pte should be ok as either the page lock is held preventing parallel reclaim or a page reference count is elevated preventing a parallel free leading to corruption. In the case of page_mkclean there isn't an obvious path that userspace could take advantage of without using the operations that are guarded by this patch. Other users such as gup as a race with reclaim looks just at PTEs. huge page variants should be ok as they don't race with reclaim. mincore only looks at PTEs. userfault also should be ok as if a parallel reclaim takes place, it will either fault the page back in or read some of the data before the flush occurs triggering a fault. Note that a variant of this patch was acked by Andy Lutomirski but this was for the x86 parts on top of his PCID work which didn't make the 4.13 merge window as expected. His ack is dropped from this version and there will be a follow-on patch on top of PCID that will include his ack. [akpm@linux-foundation.org: tweak comments] [akpm@linux-foundation.org: fix spello] Link: http://lkml.kernel.org/r/20170717155523.emckq2esjro6hf3z@suse.de Reported-by: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: <stable@vger.kernel.org> [v4.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-11userfaultfd: non-cooperative: add madvise() event for MADV_FREE requestMike Rapoport1-20/+22
MADV_FREE is identical to MADV_DONTNEED from the point of view of uffd monitor. The monitor has to stop handling #PF events in the range being freed. We are reusing userfaultfd_remove callback along with the logic required to re-get and re-validate the VMA which may change or disappear because userfaultfd_remove releases mmap_sem. Link: http://lkml.kernel.org/r/1497876311-18615-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-11swap: add block io poll in swapin pathShaohua Li1-2/+2
For fast flash disk, async IO could introduce overhead because of context switch. block-mq now supports IO poll, which improves performance and latency a lot. swapin is a good place to use this technique, because the task is waiting for the swapin page to continue execution. In my virtual machine, directly read 4k data from a NVMe with iopoll is about 60% better than that without poll. With iopoll support in swapin patch, my microbenchmark (a task does random memory write) is about 10%~25% faster. CPU utilization increases a lot though, 2x and even 3x CPU utilization. This will depend on disk speed. While iopoll in swapin isn't intended for all usage cases, it's a win for latency sensistive workloads with high speed swap disk. block layer has knob to control poll in runtime. If poll isn't enabled in block layer, there should be no noticeable change in swapin. I got a chance to run the same test in a NVMe with DRAM as the media. In simple fio IO test, blkpoll boosts 50% performance in single thread test and ~20% in 8 threads test. So this is the base line. In above swap test, blkpoll boosts ~27% performance in single thread test. blkpoll uses 2x CPU time though. If we enable hybid polling, the performance gain has very slight drop but CPU time is only 50% worse than that without blkpoll. Also we can adjust parameter of hybid poll, with it, the CPU time penality is reduced further. In 8 threads test, blkpoll doesn't help though. The performance is similar to that without blkpoll, but cpu utilization is similar too. There is lock contention in swap path. The cpu time spending on blkpoll isn't high. So overall, blkpoll swapin isn't worse than that without it. The swapin readahead might read several pages in in the same time and form a big IO request. Since the IO will take longer time, it doesn't make sense to do poll, so the patch only does iopoll for single page swapin. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/070c3c3e40b711e7b1390002c991e86a-b5408f0@7511894063d3764ff01ea8111f5a004d7dd700ed078797c204a24e620ddb965c Signed-off-by: Shaohua Li <shli@fb.com> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Jens Axboe <axboe@fb.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-04mm/madvise: move up the behavior parameter validationAnshuman Khandual1-4/+9
madvise_behavior_valid() should be called before acting upon the behavior parameter. Hence move up the function. This also includes MADV_SOFT_OFFLINE and MADV_HWPOISON options as valid behavior parameter for the system call madvise(). Link: http://lkml.kernel.org/r/20170418052844.24891-1-khandual@linux.vnet.ibm.com Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-04mm/madvise.c: clean up MADV_SOFT_OFFLINE and MADV_HWPOISONAnshuman Khandual1-14/+20
This cleans up handling MADV_SOFT_OFFLINE and MADV_HWPOISON called through madvise() system call. * madvise_memory_failure() was misleading to accommodate handling of both memory_failure() as well as soft_offline_page() functions. Basically it handles memory error injection from user space which can go either way as memory failure or soft offline. Renamed as madvise_inject_error() instead. * Renamed struct page pointer 'p' to 'page'. * pr_info() was essentially printing PFN value but it said 'page' which was misleading. Made the process virtual address explicit. Before the patch: Soft offlining page 0x15e3e at 0x3fff8c230000 Soft offlining page 0x1f3 at 0x3fffa0da0000 Soft offlining page 0x744 at 0x3fff7d200000 Soft offlining page 0x1634d at 0x3fff95e20000 Soft offlining page 0x16349 at 0x3fff95e30000 Soft offlining page 0x1d6 at 0x3fff9e8b0000 Soft offlining page 0x5f3 at 0x3fff91bd0000 Injecting memory failure for page 0x15c8b at 0x3fff83280000 Injecting memory failure for page 0x16190 at 0x3fff83290000 Injecting memory failure for page 0x740 at 0x3fff9a2e0000 Injecting memory failure for page 0x741 at 0x3fff9a2f0000 After the patch: Soft offlining pfn 0x1484e at process virtual address 0x3fff883c0000 Soft offlining pfn 0x1484f at process virtual address 0x3fff883d0000 Soft offlining pfn 0x14850 at process virtual address 0x3fff883e0000 Soft offlining pfn 0x14851 at process virtual address 0x3fff883f0000 Soft offlining pfn 0x14852 at process virtual address 0x3fff88400000 Soft offlining pfn 0x14853 at process virtual address 0x3fff88410000 Soft offlining pfn 0x14854 at process virtual address 0x3fff88420000 Soft offlining pfn 0x1521c at process virtual address 0x3fff6bc70000 Injecting memory failure for pfn 0x10fcf at process virtual address 0x3fff86310000 Injecting memory failure for pfn 0x10fd0 at process virtual address 0x3fff86320000 Injecting memory failure for pfn 0x10fd1 at process virtual address 0x3fff86330000 Injecting memory failure for pfn 0x10fd2 at process virtual address 0x3fff86340000 Injecting memory failure for pfn 0x10fd3 at process virtual address 0x3fff86350000 Injecting memory failure for pfn 0x10fd4 at process virtual address 0x3fff86360000 Injecting memory failure for pfn 0x10fd5 at process virtual address 0x3fff86370000 Link: http://lkml.kernel.org/r/20170410084701.11248-1-khandual@linux.vnet.ibm.com Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-04mm: enable MADV_FREE for swapless systemShaohua Li1-7/+1
Now MADV_FREE pages can be easily reclaimed even for swapless system. We can safely enable MADV_FREE for all systems. Link: http://lkml.kernel.org/r/155648585589300bfae1d45078e7aebb3d988b87.1487965799.git.shli@fb.com Signed-off-by: Shaohua Li <shli@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-04mm: reclaim MADV_FREE pagesShaohua Li1-0/+1
When memory pressure is high, we free MADV_FREE pages. If the pages are not dirty in pte, the pages could be freed immediately. Otherwise we can't reclaim them. We put the pages back to anonumous LRU list (by setting SwapBacked flag) and the pages will be reclaimed in normal swapout way. We use normal page reclaim policy. Since MADV_FREE pages are put into inactive file list, such pages and inactive file pages are reclaimed according to their age. This is expected, because we don't want to reclaim too many MADV_FREE pages before used once pages. Based on Minchan's original patch [minchan@kernel.org: clean up lazyfree page handling] Link: http://lkml.kernel.org/r/20170303025237.GB3503@bbox Link: http://lkml.kernel.org/r/14b8eb1d3f6bf6cc492833f183ac8c304e560484.1487965799.git.shli@fb.com Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-04mm: move MADV_FREE pages into LRU_INACTIVE_FILE listShaohua Li1-2/+0
madv()'s MADV_FREE indicate pages are 'lazyfree'. They are still anonymous pages, but they can be freed without pageout. To distinguish these from normal anonymous pages, we clear their SwapBacked flag. MADV_FREE pages could be freed without pageout, so they pretty much like used once file pages. For such pages, we'd like to reclaim them once there is memory pressure. Also it might be unfair reclaiming MADV_FREE pages always before used once file pages and we definitively want to reclaim the pages before other anonymous and file pages. To speed up MADV_FREE pages reclaim, we put the pages into LRU_INACTIVE_FILE list. The rationale is LRU_INACTIVE_FILE list is tiny nowadays and should be full of used once file pages. Reclaiming MADV_FREE pages will not have much interfere of anonymous and active file pages. And the inactive file pages and MADV_FREE pages will be reclaimed according to their age, so we don't reclaim too many MADV_FREE pages too. Putting the MADV_FREE pages into LRU_INACTIVE_FILE_LIST also means we can reclaim the pages without swap support. This idea is suggested by Johannes. This patch doesn't move MADV_FREE pages to LRU_INACTIVE_FILE list yet to avoid bisect failure, next patch will do it. The patch is based on Minchan's original patch. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/2f87063c1e9354677b7618c647abde77b07561e5.1487965799.git.shli@fb.com Signed-off-by: Shaohua Li <shli@fb.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-10userfaultfd: non-cooperative: userfaultfd_remove revalidate vma in MADV_DONTNEEDAndrea Arcangeli1-3/+41
userfaultfd_remove() has to be execute before zapping the pagetables or UFFDIO_COPY could keep filling pages after zap_page_range returned, which would result in non zero data after a MADV_DONTNEED. However userfaultfd_remove() may have to release the mmap_sem. This was handled correctly in MADV_REMOVE, but MADV_DONTNEED accessed a potentially stale vma (the very vma passed to zap_page_range(vma, ...)). The fix consists in revalidating the vma in case userfaultfd_remove() had to release the mmap_sem. This also optimizes away an unnecessary down_read/up_read in the MADV_REMOVE case if UFFD_EVENT_FORK had to be delivered. It all remains zero runtime cost in case CONFIG_USERFAULTFD=n as userfaultfd_remove() will be defined as "true" at build time. Link: http://lkml.kernel.org/r/20170302173738.18994-3-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25mm: remove shmem_mapping() shmem_zero_setup() duplicatesHugh Dickins1-0/+1
Remove the prototypes for shmem_mapping() and shmem_zero_setup() from linux/mm.h, since they are already provided in linux/shmem_fs.h. But shmem_fs.h must then provide the inline stub for shmem_mapping() when CONFIG_SHMEM is not set, and a few more cfiles now need to #include it. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702081658250.1549@eggly.anvils Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25mm, madvise: fail with ENOMEM when splitting vma will hit max_map_countDavid Rientjes1-9/+42
If madvise(2) advice will result in the underlying vma being split and the number of areas mapped by the process will exceed /proc/sys/vm/max_map_count as a result, return ENOMEM instead of EAGAIN. EAGAIN is returned by madvise(2) when a kernel resource, such as slab, is temporarily unavailable. It indicates that userspace should retry the advice in the near future. This is important for advice such as MADV_DONTNEED which is often used by malloc implementations to free memory back to the system: we really do want to free memory back when madvise(2) returns EAGAIN because slab allocations (for vmas, anon_vmas, or mempolicies) cannot be allocated. Encountering /proc/sys/vm/max_map_count is not a temporary failure, however, so return ENOMEM to indicate this is a more serious issue. A followup patch to the man page will specify this behavior. Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1701241431120.42507@chino.kir.corp.google.com Signed-off-by: David Rientjes <rientjes@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25userfaultfd: non-cooperative: add madvise() event for MADV_REMOVE requestMike Rapoport1-0/+1
When a page is removed from a shared mapping, the uffd reader should be notified, so that it won't attempt to handle #PF events for the removed pages. We can reuse the UFFD_EVENT_REMOVE because from the uffd monitor point of view, the semantices of madvise(MADV_DONTNEED) and madvise(MADV_REMOVE) is exactly the same. Link: http://lkml.kernel.org/r/1484814154-1557-3-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25userfaultfd: non-cooperative: rename *EVENT_MADVDONTNEED to *EVENT_REMOVEMike Rapoport1-1/+1
Patch series "userfaultfd: non-cooperative: add madvise() event for MADV_REMOVE request". These patches add notification of madvise(MADV_REMOVE) event to non-cooperative userfaultfd monitor. The first pacth renames EVENT_MADVDONTNEED to EVENT_REMOVE along with relevant functions and structures. Using _REMOVE instead of _MADVDONTNEED describes the event semantics more clearly and I hope it's not too late for such change in the ABI. This patch (of 3): The UFFD_EVENT_MADVDONTNEED purpose is to notify uffd monitor about removal of certain range from address space tracked by userfaultfd. Hence, UFFD_EVENT_REMOVE seems to better reflect the operation semantics. Respectively, 'madv_dn' field of uffd_msg is renamed to 'remove' and the madvise_userfault_dontneed callback is renamed to userfaultfd_remove. Link: http://lkml.kernel.org/r/1484814154-1557-2-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23oom-reaper: use madvise_dontneed() logic to decide if unmap the VMAKirill A. Shutemov1-1/+3
Logic on whether we can reap pages from the VMA should match what we have in madvise_dontneed(). In particular, we should skip, VM_PFNMAP VMAs, but we don't now. Let's just extract condition on which we can shoot down pagesi from a VMA with MADV_DONTNEED into separate function and use it in both places. Link: http://lkml.kernel.org/r/20170118122429.43661-4-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23mm: drop unused argument of zap_page_range()Kirill A. Shutemov1-1/+1
There's no users of zap_page_range() who wants non-NULL 'details'. Let's drop it. Link: http://lkml.kernel.org/r/20170118122429.43661-3-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23userfaultfd: non-cooperative: avoid MADV_DONTNEED race conditionAndrea Arcangeli1-1/+1
MADV_DONTNEED must be notified to userland before the pages are zapped. This allows userland to immediately stop adding pages to the userfaultfd ranges before the pages are actually zapped or there could be non-zeropage leftovers as result of concurrent UFFDIO_COPY run in between zap_page_range and madvise_userfault_dontneed (both MADV_DONTNEED and UFFDIO_COPY runs under the mmap_sem for reading, so they can run concurrently). Link: http://lkml.kernel.org/r/20161216144821.5183-15-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Michael Rapoport <RAPOPORT@il.ibm.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>