summaryrefslogtreecommitdiff
path: root/lib/rhashtable.c
AgeCommit message (Collapse)AuthorFilesLines
2018-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-1/+0
Pull networking fixes from David Miller: 1) ICE, E1000, IGB, IXGBE, and I40E bug fixes from the Intel folks. 2) Better fix for AB-BA deadlock in packet scheduler code, from Cong Wang. 3) bpf sockmap fixes (zero sized key handling, etc.) from Daniel Borkmann. 4) Send zero IPID in TCP resets and SYN-RECV state ACKs, to prevent attackers using it as a side-channel. From Eric Dumazet. 5) Memory leak in mediatek bluetooth driver, from Gustavo A. R. Silva. 6) Hook up rt->dst.input of ipv6 anycast routes properly, from Hangbin Liu. 7) hns and hns3 bug fixes from Huazhong Tan. 8) Fix RIF leak in mlxsw driver, from Ido Schimmel. 9) iova range check fix in vhost, from Jason Wang. 10) Fix hang in do_tcp_sendpages() with tls, from John Fastabend. 11) More r8152 chips need to disable RX aggregation, from Kai-Heng Feng. 12) Memory exposure in TCA_U32_SEL handling, from Kees Cook. 13) TCP BBR congestion control fixes from Kevin Yang. 14) hv_netvsc, ignore non-PCI devices, from Stephen Hemminger. 15) qed driver fixes from Tomer Tayar. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits) net: sched: Fix memory exposure from short TCA_U32_SEL qed: fix spelling mistake "comparsion" -> "comparison" vhost: correctly check the iova range when waking virtqueue qlge: Fix netdev features configuration. net: macb: do not disable MDIO bus at open/close time Revert "net: stmmac: fix build failure due to missing COMMON_CLK dependency" net: macb: Fix regression breaking non-MDIO fixed-link PHYs mlxsw: spectrum_switchdev: Do not leak RIFs when removing bridge i40e: fix condition of WARN_ONCE for stat strings i40e: Fix for Tx timeouts when interface is brought up if DCB is enabled ixgbe: fix driver behaviour after issuing VFLR ixgbe: Prevent unsupported configurations with XDP ixgbe: Replace GFP_ATOMIC with GFP_KERNEL igb: Replace mdelay() with msleep() in igb_integrated_phy_loopback() igb: Replace GFP_ATOMIC with GFP_KERNEL in igb_sw_init() igb: Use an advanced ctx descriptor for launchtime e1000: ensure to free old tx/rx rings in set_ringparam() e1000: check on netif_running() before calling e1000_up() ixgb: use dma_zalloc_coherent instead of allocator/memset ice: Trivial formatting fixes ...
2018-08-22lib/rhashtable: guarantee initial hashtable allocationDavidlohr Bueso1-3/+11
rhashtable_init() may fail due to -ENOMEM, thus making the entire api unusable. This patch removes this scenario, however unlikely. In order to guarantee memory allocation, this patch always ends up doing GFP_KERNEL|__GFP_NOFAIL for both the tbl as well as alloc_bucket_spinlocks(). Upon the first table allocation failure, we shrink the size to the smallest value that makes sense and retry with __GFP_NOFAIL semantics. With the defaults, this means that from 64 buckets, we retry with only 4. Any later issues regarding performance due to collisions or larger table resizing (when more memory becomes available) is the least of our problems. Link: http://lkml.kernel.org/r/20180712185241.4017-9-manfred@colorfullife.com Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22lib/rhashtable: simplify bucket_table_alloc()Davidlohr Bueso1-5/+2
As of ce91f6ee5b3b ("mm: kvmalloc does not fallback to vmalloc for incompatible gfp flags") we can simplify the caller and trust kvzalloc() to just do the right thing. For the case of the GFP_ATOMIC context, we can drop the __GFP_NORETRY flag for obvious reasons, and for the __GFP_NOWARN case, however, it is changed such that the caller passes the flag instead of making bucket_table_alloc() handle it. This slightly changes the gfp flags passed on to nested_table_alloc() as it will now also use GFP_ATOMIC | __GFP_NOWARN. However, I consider this a positive consequence as for the same reasons we want nowarn semantics in bucket_table_alloc(). [manfred@colorfullife.com: commit id extended to 12 digits, line wraps updated] Link: http://lkml.kernel.org/r/20180712185241.4017-8-manfred@colorfullife.com Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Kees Cook <keescook@chromium.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-21rhashtable: remove duplicated include from rhashtable.cYue Haibing1-1/+0
Remove duplicated include. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21Merge ra.kernel.org:/pub/scm/linux/kernel/git/torvalds/linuxDavid S. Miller1-8/+19
All conflicts were trivial overlapping changes, so reasonably easy to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18lib/rhashtable: consider param->min_size when setting initial table sizeDavidlohr Bueso1-6/+11
rhashtable_init() currently does not take into account the user-passed min_size parameter unless param->nelem_hint is set as well. As such, the default size (number of buckets) will always be HASH_DEFAULT_SIZE even if the smallest allowed size is larger than that. Remediate this by unconditionally calling into rounded_hashtable_size() and handling things accordingly. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-10rhashtable: add restart routine in rhashtable_free_and_destroy()Taehee Yoo1-1/+7
rhashtable_free_and_destroy() cancels re-hash deferred work then walks and destroys elements. at this moment, some elements can be still in future_tbl. that elements are not destroyed. test case: nft_rhash_destroy() calls rhashtable_free_and_destroy() to destroy all elements of sets before destroying sets and chains. But rhashtable_free_and_destroy() doesn't destroy elements of future_tbl. so that splat occurred. test script: %cat test.nft table ip aa { map map1 { type ipv4_addr : verdict; elements = { 0 : jump a0, 1 : jump a0, 2 : jump a0, 3 : jump a0, 4 : jump a0, 5 : jump a0, 6 : jump a0, 7 : jump a0, 8 : jump a0, 9 : jump a0, } } chain a0 { } } flush ruleset table ip aa { map map1 { type ipv4_addr : verdict; elements = { 0 : jump a0, 1 : jump a0, 2 : jump a0, 3 : jump a0, 4 : jump a0, 5 : jump a0, 6 : jump a0, 7 : jump a0, 8 : jump a0, 9 : jump a0, } } chain a0 { } } flush ruleset %while :; do nft -f test.nft; done Splat looks like: [ 200.795603] kernel BUG at net/netfilter/nf_tables_api.c:1363! [ 200.806944] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 200.812253] CPU: 1 PID: 1582 Comm: nft Not tainted 4.17.0+ #24 [ 200.820297] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015 [ 200.830309] RIP: 0010:nf_tables_chain_destroy.isra.34+0x62/0x240 [nf_tables] [ 200.838317] Code: 43 50 85 c0 74 26 48 8b 45 00 48 8b 4d 08 ba 54 05 00 00 48 c7 c6 60 6d 29 c0 48 c7 c7 c0 65 29 c0 4c 8b 40 08 e8 58 e5 fd f8 <0f> 0b 48 89 da 48 b8 00 00 00 00 00 fc ff [ 200.860366] RSP: 0000:ffff880118dbf4d0 EFLAGS: 00010282 [ 200.866354] RAX: 0000000000000061 RBX: ffff88010cdeaf08 RCX: 0000000000000000 [ 200.874355] RDX: 0000000000000061 RSI: 0000000000000008 RDI: ffffed00231b7e90 [ 200.882361] RBP: ffff880118dbf4e8 R08: ffffed002373bcfb R09: ffffed002373bcfa [ 200.890354] R10: 0000000000000000 R11: ffffed002373bcfb R12: dead000000000200 [ 200.898356] R13: dead000000000100 R14: ffffffffbb62af38 R15: dffffc0000000000 [ 200.906354] FS: 00007fefc31fd700(0000) GS:ffff88011b800000(0000) knlGS:0000000000000000 [ 200.915533] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 200.922355] CR2: 0000557f1c8e9128 CR3: 0000000106880000 CR4: 00000000001006e0 [ 200.930353] Call Trace: [ 200.932351] ? nf_tables_commit+0x26f6/0x2c60 [nf_tables] [ 200.939525] ? nf_tables_setelem_notify.constprop.49+0x1a0/0x1a0 [nf_tables] [ 200.947525] ? nf_tables_delchain+0x6e0/0x6e0 [nf_tables] [ 200.952383] ? nft_add_set_elem+0x1700/0x1700 [nf_tables] [ 200.959532] ? nla_parse+0xab/0x230 [ 200.963529] ? nfnetlink_rcv_batch+0xd06/0x10d0 [nfnetlink] [ 200.968384] ? nfnetlink_net_init+0x130/0x130 [nfnetlink] [ 200.975525] ? debug_show_all_locks+0x290/0x290 [ 200.980363] ? debug_show_all_locks+0x290/0x290 [ 200.986356] ? sched_clock_cpu+0x132/0x170 [ 200.990352] ? find_held_lock+0x39/0x1b0 [ 200.994355] ? sched_clock_local+0x10d/0x130 [ 200.999531] ? memset+0x1f/0x40 V2: - free all tables requested by Herbert Xu Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-03lib: rhashtable: Correct self-assignment in rhashtable.cRishabh Bhatnagar1-1/+1
In file lib/rhashtable.c line 777, skip variable is assigned to itself. The following error was observed: lib/rhashtable.c:777:41: warning: explicitly assigning value of variable of type 'int' to itself [-Wself-assign] error, forbidden warning: rhashtable.c:777 This error was found when compiling with Clang 6.0. Change it to iter->skip. Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-22rhashtable: clean up dereference of ->future_tbl.NeilBrown1-5/+4
Using rht_dereference_bucket() to dereference ->future_tbl looks like a type error, and could be confusing. Using rht_dereference_rcu() to test a pointer for NULL adds an unnecessary barrier - rcu_access_pointer() is preferred for NULL tests when no lock is held. This uses 3 different ways to access ->future_tbl. - if we know the mutex is held, use rht_dereference() - if we don't hold the mutex, and are only testing for NULL, use rcu_access_pointer() - otherwise (using RCU protection for true dereference), use rht_dereference_rcu(). Note that this includes a simplification of the call to rhashtable_last_table() - we don't do an extra dereference before the call any more. Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-22rhashtable: use cmpxchg() to protect ->future_tbl.NeilBrown1-11/+4
Rather than borrowing one of the bucket locks to protect ->future_tbl updates, use cmpxchg(). This gives more freedom to change how bucket locking is implemented. Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-22rhashtable: simplify nested_table_alloc() and rht_bucket_nested_insert()NeilBrown1-12/+6
Now that we don't use the hash value or shift in nested_table_alloc() there is room for simplification. We only need to pass a "is this a leaf" flag to nested_table_alloc(), and don't need to track as much information in rht_bucket_nested_insert(). Note there is another minor cleanup in nested_table_alloc() here. The number of elements in a page of "union nested_tables" is most naturally PAGE_SIZE / sizeof(ntbl[0]) The previous code had PAGE_SIZE / sizeof(ntbl[0].bucket) which happens to be the correct value only because the bucket uses all the space in the union. Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-22rhashtable: simplify INIT_RHT_NULLS_HEAD()NeilBrown1-9/+6
The 'ht' and 'hash' arguments to INIT_RHT_NULLS_HEAD() are no longer used - so drop them. This allows us to also remove the nhash argument from nested_table_alloc(). Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-22rhashtable: remove nulls_base and related code.NeilBrown1-8/+0
This "feature" is unused, undocumented, and untested and so doesn't really belong. A patch is under development to properly implement support for detecting when a search gets diverted down a different chain, which the common purpose of nulls markers. This patch actually fixes a bug too. The table resizing allows a table to grow to 2^31 buckets, but the hash is truncated to 27 bits - any growth beyond 2^27 is wasteful an ineffective. This patch results in NULLS_MARKER(0) being used for all chains, and leaves the use of rht_is_a_null() to test for it. Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-22rhashtable: split rhashtable.hNeilBrown1-0/+1
Due to the use of rhashtables in net namespaces, rhashtable.h is included in lots of the kernel, so a small changes can required a large recompilation. This makes development painful. This patch splits out rhashtable-types.h which just includes the major type declarations, and does not include (non-trivial) inline code. rhashtable.h is no longer included by anything in the include/ directory. Common include files only include rhashtable-types.h so a large recompilation is only triggered when that changes. Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24rhashtable: improve rhashtable_walk stability when stop/start used.NeilBrown1-3/+41
When a walk of an rhashtable is interrupted with rhastable_walk_stop() and then rhashtable_walk_start(), the location to restart from is based on a 'skip' count in the current hash chain, and this can be incorrect if insertions or deletions have happened. This does not happen when the walk is not stopped and started as iter->p is a placeholder which is safe to use while holding the RCU read lock. In rhashtable_walk_start() we can revalidate that 'p' is still in the same hash chain. If it isn't then the current method is still used. With this patch, if a rhashtable walker ensures that the current object remains in the table over a stop/start period (possibly by elevating the reference count if that is sufficient), it can be sure that a walk will not miss objects that were in the hashtable for the whole time of the walk. rhashtable_walk_start() may not find the object even though it is still in the hashtable if a rehash has moved it to a new table. In this case it will (eventually) get -EAGAIN and will need to proceed through the whole table again to be sure to see everything at least once. Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24rhashtable: reset iter when rhashtable_walk_start sees new tableNeilBrown1-0/+2
The documentation claims that when rhashtable_walk_start_check() detects a resize event, it will rewind back to the beginning of the table. This is not true. We need to set ->slot and ->skip to be zero for it to be true. Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24rhashtable: Revise incorrect comment on r{hl, hash}table_walk_enter()NeilBrown1-2/+3
Neither rhashtable_walk_enter() or rhltable_walk_enter() sleep, though they do take a spinlock without irq protection. So revise the comments to accurately state the contexts in which these functions can be called. Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01rhashtable: add schedule pointsEric Dumazet1-0/+2
Rehashing and destroying large hash table takes a lot of time, and happens in process context. It is safe to add cond_resched() in rhashtable_rehash_table() and rhashtable_free_and_destroy() Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07rhashtable: Fix rhlist duplicates insertionPaul Blakey1-1/+3
When inserting duplicate objects (those with the same key), current rhlist implementation messes up the chain pointers by updating the bucket pointer instead of prev next pointer to the newly inserted node. This causes missing elements on removal and travesal. Fix that by properly updating pprev pointer to point to the correct rhash_head next pointer. Issue: 1241076 Change-Id: I86b2c140bcb4aeb10b70a72a267ff590bb2b17e7 Fixes: ca26893f05e8 ('rhashtable: Add rhlist interface') Signed-off-by: Paul Blakey <paulb@mellanox.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11rhashtable: Call library function alloc_bucket_locksTom Herbert1-39/+8
To allocate the array of bucket locks for the hash table we now call library function alloc_bucket_spinlocks. This function is based on the old alloc_bucket_locks in rhashtable and should produce the same effect. Signed-off-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11rhashtable: Add rhastable_walk_peekTom Herbert1-16/+87
This function is like rhashtable_walk_next except that it only returns the current element in the inter and does not advance the iter. This patch also creates __rhashtable_walk_find_next. It finds the next element in the table when the entry cached in iter is NULL or at the end of a slot. __rhashtable_walk_find_next is called from rhashtable_walk_next and rhastable_walk_peek. end_of_table is an added field to the iter structure. This indicates that the end of table was reached (walker.tbl being NULL is not a sufficient condition for end of table). Signed-off-by: Tom Herbert <tom@quantonium.net> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11rhashtable: Change rhashtable_walk_start to return voidTom Herbert1-3/+7
Most callers of rhashtable_walk_start don't care about a resize event which is indicated by a return value of -EAGAIN. So calls to rhashtable_walk_start are wrapped wih code to ignore -EAGAIN. Something like this is common: ret = rhashtable_walk_start(rhiter); if (ret && ret != -EAGAIN) goto out; Since zero and -EAGAIN are the only possible return values from the function this check is pointless. The condition never evaluates to true. This patch changes rhashtable_walk_start to return void. This simplifies code for the callers that ignore -EAGAIN. For the few cases where the caller cares about the resize event, particularly where the table can be walked in mulitple parts for netlink or seq file dump, the function rhashtable_walk_start_check has been added that returns -EAGAIN on a resize event. Signed-off-by: Tom Herbert <tom@quantonium.net> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20rhashtable: Documentation tweakAndreas Gruenbacher1-4/+5
Clarify that rhashtable_walk_{stop,start} will not reset the iterator to the beginning of the hash table. Confusion between rhashtable_walk_enter and rhashtable_walk_start has already lead to a bug. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-15Merge tag 'random_for_linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull random updates from Ted Ts'o: "Add wait_for_random_bytes() and get_random_*_wait() functions so that callers can more safely get random bytes if they can block until the CRNG is initialized. Also print a warning if get_random_*() is called before the CRNG is initialized. By default, only one single-line warning will be printed per boot. If CONFIG_WARN_ALL_UNSEEDED_RANDOM is defined, then a warning will be printed for each function which tries to get random bytes before the CRNG is initialized. This can get spammy for certain architecture types, so it is not enabled by default" * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: reorder READ_ONCE() in get_random_uXX random: suppress spammy warnings about unseeded randomness random: warn when kernel uses unseeded randomness net/route: use get_random_int for random counter net/neighbor: use get_random_u32 for 32-bit hash random rhashtable: use get_random_u32 for hash_rnd ceph: ensure RNG is seeded before using iscsi: ensure RNG is seeded before use cifs: use get_random_u32 for 32-bit lock random random: add get_random_{bytes,u32,u64,int,long,once}_wait family random: add wait_for_random_bytes() API
2017-07-11lib/rhashtable.c: use kvzalloc() in bucket_table_alloc() when possibleMichal Hocko1-4/+3
bucket_table_alloc() can be currently called with GFP_KERNEL or GFP_ATOMIC. For the former we basically have an open coded kvzalloc() while the later only uses kzalloc(). Let's simplify the code a bit by the dropping the open coded path and replace it with kvzalloc(). Link: http://lkml.kernel.org/r/20170531155145.17111-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Thomas Graf <tgraf@suug.ch> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-20rhashtable: use get_random_u32 for hash_rndJason A. Donenfeld1-1/+1
This is much faster and just as secure. It also has the added benefit of probably returning better randomness at early-boot on systems with architectural RNGs. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Thomas Graf <tgraf@suug.ch> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-05-09lib/rhashtable.c: simplify a strange allocation patternMichal Hocko1-10/+3
alloc_bucket_locks allocation pattern is quite unusual. We are preferring vmalloc when CONFIG_NUMA is enabled. The rationale is that vmalloc will respect the memory policy of the current process and so the backing memory will get distributed over multiple nodes if the requester is configured properly. At least that is the intention, in reality rhastable is shrunk and expanded from a kernel worker so no mempolicy can be assumed. Let's just simplify the code and use kvmalloc helper, which is a transparent way to use kmalloc with vmalloc fallback, if the caller is allowed to block and use the flag otherwise. Link: http://lkml.kernel.org/r/20170306103032.2540-4-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Tom Herbert <tom@herbertland.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-01rhashtable: compact struct rhashtable_paramsFlorian Westphal1-1/+1
By using smaller datatypes this (rather large) struct shrinks considerably (80 -> 48 bytes on x86_64). As this is embedded in other structs, this also rerduces size of several others, e.g. cls_fl_head or nft_hash. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28rhashtable: Do not lower max_elems when max_size is zeroHerbert Xu1-5/+6
The commit 6d684e54690c ("rhashtable: Cap total number of entries to 2^31") breaks rhashtable users that do not set max_size. This is because when max_size is zero max_elems is also incorrectly set to zero instead of 2^31. This patch fixes it by only lowering max_elems when max_size is not zero. Fixes: 6d684e54690c ("rhashtable: Cap total number of entries to 2^31") Reported-by: Florian Fainelli <f.fainelli@gmail.com> Reported-by: kernel test robot <fengguang.wu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27rhashtable: Cap total number of entries to 2^31Herbert Xu1-0/+5
When max_size is not set or if it set to a sufficiently large value, the nelems counter can overflow. This would cause havoc with the automatic shrinking as it would then attempt to fit a huge number of entries into a tiny hash table. This patch fixes this by adding max_elems to struct rhashtable to cap the number of elements. This is set to 2^31 as nelems is not a precise count. This is sufficiently smaller than UINT_MAX that it should be safe. When max_size is set max_elems will be lowered to at most twice max_size as is the status quo. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26rhashtable: remove insecure_max_entries paramFlorian Westphal1-6/+0
no users in the tree, insecure_max_entries is always set to ht->p.max_size * 2 in rhtashtable_init(). Replace only spot that uses it with a ht->p.max_size check. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18rhashtable: remove insecure_elasticityFlorian Westphal1-16/+1
commit 83e7e4ce9e93c3 ("mac80211: Use rhltable instead of rhashtable") removed the last user that made use of 'insecure_elasticity' parameter, i.e. the default of 16 is used everywhere. Replace it with a constant. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-02sched/headers: Prepare to use <linux/rcuupdate.h> instead of ↵Ingo Molnar1-0/+1
<linux/rculist.h> in <linux/sched.h> We don't actually need the full rculist.h header in sched.h anymore, we will be able to include the smaller rcupdate.h header instead. But first update code that relied on the implicit header inclusion. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-27rhashtable: Fix RCU dereference annotation in rht_bucket_nestedHerbert Xu1-2/+3
The current annotation is wrong as it says that we're only called under spinlock. In fact it should be marked as under either spinlock or RCU read lock. Fixes: da20420f83ea ("rhashtable: Add nested tables") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-27rhashtable: Fix use before NULL check in bucket_table_freeHerbert Xu1-3/+1
Dan Carpenter reported a use before NULL check bug in the function bucket_table_free. In fact we don't need the NULL check at all as no caller can provide a NULL argument. So this patch fixes this by simply removing it. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17rhashtable: Add nested tablesHerbert Xu1-50/+220
This patch adds code that handles GFP_ATOMIC kmalloc failure on insertion. As we cannot use vmalloc, we solve it by making our hash table nested. That is, we allocate single pages at each level and reach our desired table size by nesting them. When a nested table is created, only a single page is allocated at the top-level. Lower levels are allocated on demand during insertion. Therefore for each insertion to succeed, only two (non-consecutive) pages are needed. After a nested table is created, a rehash will be scheduled in order to switch to a vmalloced table as soon as possible. Also, the rehash code will never rehash into a nested table. If we detect a nested table during a rehash, the rehash will be aborted and a new rehash will be scheduled. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20rhashtable: Add rhlist interfaceHerbert Xu1-52/+206
The insecure_elasticity setting is an ugly wart brought out by users who need to insert duplicate objects (that is, distinct objects with identical keys) into the same table. In fact, those users have a much bigger problem. Once those duplicate objects are inserted, they don't have an interface to find them (unless you count the walker interface which walks over the entire table). Some users have resorted to doing a manual walk over the hash table which is of course broken because they don't handle the potential existence of multiple hash tables. The result is that they will break sporadically when they encounter a hash table resize/rehash. This patch provides a way out for those users, at the expense of an extra pointer per object. Essentially each object is now a list of objects carrying the same key. The hash table will only see the lists so nothing changes as far as rhashtable is concerned. To use this new interface, you need to insert a struct rhlist_head into your objects instead of struct rhash_head. While the hash table is unchanged, for type-safety you'll need to use struct rhltable instead of struct rhashtable. All the existing interfaces have been duplicated for rhlist, including the hash table walker. One missing feature is nulls marking because AFAIK the only potential user of it does not need duplicate objects. Should anyone need this it shouldn't be too hard to add. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller1-3/+7
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree. Most relevant updates are the removal of per-conntrack timers to use a workqueue/garbage collection approach instead from Florian Westphal, the hash and numgen expression for nf_tables from Laura Garcia, updates on nf_tables hash set to honor the NLM_F_EXCL flag, removal of ip_conntrack sysctl and many other incremental updates on our Netfilter codebase. More specifically, they are: 1) Retrieve only 4 bytes to fetch ports in case of non-linear skb transport area in dccp, sctp, tcp, udp and udplite protocol conntrackers, from Gao Feng. 2) Missing whitespace on error message in physdev match, from Hangbin Liu. 3) Skip redundant IPv4 checksum calculation in nf_dup_ipv4, from Liping Zhang. 4) Add nf_ct_expires() helper function and use it, from Florian Westphal. 5) Replace opencoded nf_ct_kill() call in IPVS conntrack support, also from Florian. 6) Rename nf_tables set implementation to nft_set_{name}.c 7) Introduce the hash expression to allow arbitrary hashing of selector concatenations, from Laura Garcia Liebana. 8) Remove ip_conntrack sysctl backward compatibility code, this code has been around for long time already, and we have two interfaces to do this already: nf_conntrack sysctl and ctnetlink. 9) Use nf_conntrack_get_ht() helper function whenever possible, instead of opencoding fetch of hashtable pointer and size, patch from Liping Zhang. 10) Add quota expression for nf_tables. 11) Add number generator expression for nf_tables, this supports incremental and random generators that can be combined with maps, very useful for load balancing purpose, again from Laura Garcia Liebana. 12) Fix a typo in a debug message in FTP conntrack helper, from Colin Ian King. 13) Introduce a nft_chain_parse_hook() helper function to parse chain hook configuration, this is used by a follow up patch to perform better chain update validation. 14) Add rhashtable_lookup_get_insert_key() to rhashtable and use it from the nft_set_hash implementation to honor the NLM_F_EXCL flag. 15) Missing nulls check in nf_conntrack from nf_conntrack_tuple_taken(), patch from Florian Westphal. 16) Don't use the DYING bit to know if the conntrack event has been already delivered, instead a state variable to track event re-delivery states, also from Florian. 17) Remove the per-conntrack timer, use the workqueue approach that was discussed during the NFWS, from Florian Westphal. 18) Use the netlink conntrack table dump path to kill stale entries, again from Florian. 19) Add a garbage collector to get rid of stale conntracks, from Florian. 20) Reschedule garbage collector if eviction rate is high. 21) Get rid of the __nf_ct_kill_acct() helper. 22) Use ARPHRD_ETHER instead of hardcoded 1 from ARP logger. 23) Make nf_log_set() interface assertive on unsupported families. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+4
All three conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-27rhashtable: fix a memory leak in alloc_bucket_locks()Eric Dumazet1-3/+4
If vmalloc() was successful, do not attempt a kmalloc_array() Fixes: 4cf0b354d92e ("rhashtable: avoid large lock-array allocations") Reported-by: CAI Qian <caiqian@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: CAI Qian <caiqian@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26rhashtable: add rhashtable_lookup_get_insert_key()Pablo Neira Ayuso1-3/+7
This patch modifies __rhashtable_insert_fast() so it returns the existing object that clashes with the one that you want to insert. In case the object is successfully inserted, NULL is returned. Otherwise, you get an error via ERR_PTR(). This patch adapts the existing callers of __rhashtable_insert_fast() so they handle this new logic, and it adds a new rhashtable_lookup_get_insert_key() interface to fetch this existing object. nf_tables needs this change to improve handling of EEXIST cases via honoring the NLM_F_EXCL flag and by checking if the data part of the mapping matches what we have. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-20rhashtable: Remove GFP flag from rhashtable_walk_initHerbert Xu1-28/+18
The commit 8f6fd83c6c5ec66a4a70c728535ddcdfef4f3697 ("rhashtable: accept GFP flags in rhashtable_walk_init") added a GFP flag argument to rhashtable_walk_init because some users wish to use the walker in an unsleepable context. In fact we don't need to allocate memory in rhashtable_walk_init at all. The walker is always paired with an iterator so we could just stash ourselves there. This patch does that by introducing a new enter function to replace the existing init function. This way we don't have to churn all the existing users again. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15rhashtable: fix shift by 64 when shrinkingVegard Nossum1-2/+4
I got this: ================================================================================ UBSAN: Undefined behaviour in ./include/linux/log2.h:63:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 1 PID: 721 Comm: kworker/1:1 Not tainted 4.8.0-rc1+ #87 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 Workqueue: events rht_deferred_worker 0000000000000000 ffff88011661f8d8 ffffffff82344f50 0000000041b58ab3 ffffffff84f98000 ffffffff82344ea4 ffff88011661f900 ffff88011661f8b0 0000000000000001 ffff88011661f6b8 dffffc0000000000 ffffffff867f7640 Call Trace: [<ffffffff82344f50>] dump_stack+0xac/0xfc [<ffffffff82344ea4>] ? _atomic_dec_and_lock+0xc4/0xc4 [<ffffffff8242f5b8>] ubsan_epilogue+0xd/0x8a [<ffffffff82430c41>] __ubsan_handle_shift_out_of_bounds+0x255/0x29a [<ffffffff824309ec>] ? __ubsan_handle_out_of_bounds+0x180/0x180 [<ffffffff84003436>] ? nl80211_req_set_reg+0x256/0x2f0 [<ffffffff812112ba>] ? print_context_stack+0x8a/0x160 [<ffffffff81200031>] ? amd_pmu_reset+0x341/0x380 [<ffffffff823af808>] rht_deferred_worker+0x1618/0x1790 [<ffffffff823af808>] ? rht_deferred_worker+0x1618/0x1790 [<ffffffff823ae1f0>] ? rhashtable_jhash2+0x370/0x370 [<ffffffff8134c12d>] ? process_one_work+0x6fd/0x1970 [<ffffffff8134c1cf>] process_one_work+0x79f/0x1970 [<ffffffff8134c12d>] ? process_one_work+0x6fd/0x1970 [<ffffffff8134ba30>] ? try_to_grab_pending+0x4c0/0x4c0 [<ffffffff8134d564>] ? worker_thread+0x1c4/0x1340 [<ffffffff8134d8ff>] worker_thread+0x55f/0x1340 [<ffffffff845e904f>] ? __schedule+0x4df/0x1d40 [<ffffffff8134d3a0>] ? process_one_work+0x1970/0x1970 [<ffffffff8134d3a0>] ? process_one_work+0x1970/0x1970 [<ffffffff813642f7>] kthread+0x237/0x390 [<ffffffff813640c0>] ? __kthread_parkme+0x280/0x280 [<ffffffff845f8c93>] ? _raw_spin_unlock_irq+0x33/0x50 [<ffffffff845f95df>] ret_from_fork+0x1f/0x40 [<ffffffff813640c0>] ? __kthread_parkme+0x280/0x280 ================================================================================ roundup_pow_of_two() is undefined when called with an argument of 0, so let's avoid the call and just fall back to ht->p.min_size (which should never be smaller than HASH_MIN_SIZE). Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15rhashtable: avoid large lock-array allocationsFlorian Westphal1-2/+5
Sander reports following splat after netfilter nat bysrc table got converted to rhashtable: swapper/0: page allocation failure: order:3, mode:0x2084020(GFP_ATOMIC|__GFP_COMP) CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.0-rc1 [..] [<ffffffff811633ed>] warn_alloc_failed+0xdd/0x140 [<ffffffff811638b1>] __alloc_pages_nodemask+0x3e1/0xcf0 [<ffffffff811a72ed>] alloc_pages_current+0x8d/0x110 [<ffffffff8117cb7f>] kmalloc_order+0x1f/0x70 [<ffffffff811aec19>] __kmalloc+0x129/0x140 [<ffffffff8146d561>] bucket_table_alloc+0xc1/0x1d0 [<ffffffff8146da1d>] rhashtable_insert_rehash+0x5d/0xe0 [<ffffffff819fcfff>] nf_nat_setup_info+0x2ef/0x400 The failure happens when allocating the spinlock array. Even with GFP_KERNEL its unlikely for such a large allocation to succeed. Thomas Graf pointed me at inet_ehash_locks_alloc(), so in addition to adding NOWARN for atomic allocations this also makes the bucket-array sizing more conservative. In commit 095dc8e0c3686 ("tcp: fix/cleanup inet_ehash_locks_alloc()"), Eric Dumazet says: "Budget 2 cache lines per cpu worth of 'spinlocks'". IOW, consider size needed by a single spinlock when determining number of locks per cpu. So with 64 byte per cacheline and 4 byte per spinlock this gives 32 locks per cpu. Resulting size of the lock-array (sizeof(spinlock) == 4): cpus: 1 2 4 8 16 32 64 old: 1k 1k 4k 8k 16k 16k 16k new: 128 256 512 1k 2k 4k 8k 8k allocation should have decent chance of success even with GFP_ATOMIC, and should not fail with GFP_KERNEL. With 72-byte spinlock (LOCKDEP): cpus : 1 2 old: 9k 18k new: ~2k ~4k Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-05rhashtable: accept GFP flags in rhashtable_walk_initBob Copeland1-2/+4
In certain cases, the 802.11 mesh pathtable code wants to iterate over all of the entries in the forwarding table from the receive path, which is inside an RCU read-side critical section. Enable walks inside atomic sections by allowing GFP_ATOMIC allocations for the walker state. Change all existing callsites to pass in GFP_KERNEL. Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Bob Copeland <me@bobcopeland.com> [also adjust gfs2/glock.c and rhashtable tests] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
2015-12-19rhashtable: Kill harmless RCU warning in rhashtable_walk_initHerbert Xu1-1/+2
The commit c6ff5268293ef98e48a99597e765ffc417e39fa5 ("rhashtable: Fix walker list corruption") causes a suspicious RCU usage warning because we no longer hold ht->mutex when we dereference ht->tbl. However, this is a false positive because we now hold ht->lock which also guarantees that ht->tbl won't disppear from under us. This patch kills the warning by using rcu_dereference_protected. Reported-by: kernel test robot <ying.huang@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-27/+40
Conflicts: drivers/net/geneve.c Here we had an overlapping change, where in 'net' the extraneous stats bump was being removed whilst in 'net-next' the final argument to udp_tunnel6_xmit_skb() was being changed. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-16rhashtable: Fix walker list corruptionHerbert Xu1-9/+7
The commit ba7c95ea3870fe7b847466d39a049ab6f156aa2c ("rhashtable: Fix sleeping inside RCU critical section in walk_stop") introduced a new spinlock for the walker list. However, it did not convert all existing users of the list over to the new spin lock. Some continued to use the old mutext for this purpose. This obviously led to corruption of the list. The fix is to use the spin lock everywhere where we touch the list. This also allows us to do rcu_rad_lock before we take the lock in rhashtable_walk_start. With the old mutex this would've deadlocked but it's safe with the new spin lock. Fixes: ba7c95ea3870 ("rhashtable: Fix sleeping inside RCU...") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-16rhashtable: Enforce minimum size on initial hash tableHerbert Xu1-3/+3
William Hua <william.hua@canonical.com> wrote: > > I wasn't aware there was an enforced minimum size. I simply set the > nelem_hint in the rhastable_params struct to 1, expecting it to grow as > needed. This caused a segfault afterwards when trying to insert an > element. OK we're doing the size computation before we enforce the limit on min_size. ---8<--- We need to do the initial hash table size computation after we have obtained the correct min_size/max_size parameters. Otherwise we may end up with a hash table whose size is outside the allowed envelope. Fixes: a998f712f77e ("rhashtable: Round up/down min/max_size to...") Reported-by: William Hua <william.hua@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>