| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Tracing fixes for 5.15:
- Fix defined but not use warning/error for osnoise function
- Fix memory leak in event probe
- Fix memblock leak in bootconfig
- Fix the API of event probes to be like kprobes
- Added test to check removal of event probe API
- Fix recordmcount.pl for nds32 failed build
* tag 'trace-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
nds32/ftrace: Fix Error: invalid operands (*UND* and *UND* sections) for `^'
selftests/ftrace: Update test for more eprobe removal process
tracing: Fix event probe removal from dynamic events
tracing: Fix missing * in comment block
bootconfig: init: Fix memblock leak in xbc_make_cmdline()
tracing: Fix memory leak in eprobe_register()
tracing: Fix missing osnoise tracer on max_latency
|
|
When an event probe is to be removed via the API that created it via the
dynamic events, an -ENOENT error is returned.
This is because the removal of the event probe does not expect to see the
event system and name that the event probe is attached to, even though
that's part of the API to create it. As the removal of probes is to use
the same API as they are created.
In fact, the removal is not consistent with the kprobes and uprobes
removal. Fix that by allowing various ways to remove the eprobe.
The eprobe is created with:
e:[GROUP/]NAME SYSTEM/EVENT [OPTIONS]
Have it get removed by echoing in the following into dynamic_events:
# Remove all eprobes with NAME
echo '-:NAME' >> dynamic_events
# Remove a specific eprobe
echo '-:GROUP/NAME' >> dynamic_events
echo '-:GROUP/NAME SYSTEM/EVENT' >> dynamic_events
echo '-:NAME SYSTEM/EVENT' >> dynamic_events
echo '-:GROUP/NAME SYSTEM/EVENT OPTIONS' >> dynamic_events
echo '-:NAME SYSTEM/EVENT OPTIONS' >> dynamic_events
Link: https://lkml.kernel.org/r/20211012081925.0e19cc4f@gandalf.local.home
Link: https://lkml.kernel.org/r/20211013205533.630722129@goodmis.org
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 7491e2c442781 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules fix from Jessica Yu:
- Build fix for cfi_init() when CONFIG_MODULE_UNLOAD=n
* tag 'modules-for-v5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: fix clang CFI with MODULE_UNLOAD=n
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"All documentation / comment updates"
* 'for-5.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroupv2, docs: fix misinformation in "device controller" section
cgroup/cpuset: Change references of cpuset_mutex to cpuset_rwsem
docs/cgroup: remove some duplicate words
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
"One patch to add a missing __printf annotation and the other to enable
deferred printing for debug dumps to avoid deadlocks when triggered
from some contexts (e.g. console drivers)"
* 'for-5.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix state-dump console deadlock
workqueue: annotate alloc_workqueue() as printf
|
|
Console drivers often queue work while holding locks also taken in their
console write paths, something which can lead to deadlocks on SMP when
dumping workqueue state (e.g. sysrq-t or on suspend failures).
For serial console drivers this could look like:
CPU0 CPU1
---- ----
show_workqueue_state();
lock(&pool->lock); <IRQ>
lock(&port->lock);
schedule_work();
lock(&pool->lock);
printk();
lock(console_owner);
lock(&port->lock);
where workqueues are, for example, used to push data to the line
discipline, process break signals and handle modem-status changes. Line
disciplines and serdev drivers can also queue work on write-wakeup
notifications, etc.
Reworking every console driver to avoid queuing work while holding locks
also taken in their write paths would complicate drivers and is neither
desirable or feasible.
Instead use the deferred-printk mechanism to avoid printing while
holding pool locks when dumping workqueue state.
Note that there are a few WARN_ON() assertions in the workqueue code
which could potentially also trigger a deadlock. Hopefully the ongoing
printk rework will provide a general solution for this eventually.
This was originally reported after a lockdep splat when executing
sysrq-t with the imx serial driver.
Fixes: 3494fc30846d ("workqueue: dump workqueues on sysrq-t")
Cc: stable@vger.kernel.org # 4.0
Reported-by: Fabio Estevam <festevam@denx.de>
Tested-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
There is a missing * in a comment block, add it in.
Link: https://lkml.kernel.org/r/20211006172830.1025336-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
kmemleak report:
unreferenced object 0xffff900a70ec7ec0 (size 32):
comm "ftracetest", pid 2770, jiffies 4295042510 (age 311.464s)
hex dump (first 32 bytes):
c8 31 23 45 0a 90 ff ff 40 85 c7 6e 0a 90 ff ff .1#E....@..n....
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000009d3751fd>] kmem_cache_alloc_trace+0x2a2/0x440
[<0000000088b8124b>] eprobe_register+0x1e3/0x350
[<000000002a9a0517>] __ftrace_event_enable_disable+0x7c/0x240
[<0000000019109321>] event_enable_write+0x93/0xe0
[<000000007d85b320>] vfs_write+0xb9/0x260
[<00000000b94c5e41>] ksys_write+0x67/0xe0
[<000000005a08c81d>] __x64_sys_write+0x1a/0x20
[<00000000240bf576>] do_syscall_64+0x3b/0xc0
[<0000000043d5d9f6>] entry_SYSCALL_64_after_hwframe+0x44/0xae
unreferenced object 0xffff900a56bbf280 (size 128):
comm "ftracetest", pid 2770, jiffies 4295042510 (age 311.464s)
hex dump (first 32 bytes):
ff ff ff ff ff ff ff ff 00 00 00 00 01 00 00 00 ................
80 69 3b b2 ff ff ff ff 20 69 3b b2 ff ff ff ff .i;..... i;.....
backtrace:
[<000000009d3751fd>] kmem_cache_alloc_trace+0x2a2/0x440
[<00000000c4e90fad>] eprobe_register+0x1fc/0x350
[<000000002a9a0517>] __ftrace_event_enable_disable+0x7c/0x240
[<0000000019109321>] event_enable_write+0x93/0xe0
[<000000007d85b320>] vfs_write+0xb9/0x260
[<00000000b94c5e41>] ksys_write+0x67/0xe0
[<000000005a08c81d>] __x64_sys_write+0x1a/0x20
[<00000000240bf576>] do_syscall_64+0x3b/0xc0
[<0000000043d5d9f6>] entry_SYSCALL_64_after_hwframe+0x44/0xae
In new_eprobe_trigger(), allocated edata and trigger variables are
never freed.
To fix, free memory in disable_eprobe().
Link: https://lkml.kernel.org/r/20211008071802.GA2098@cosmos
Fixes: 7491e2c442781 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from xfrm, bpf, netfilter, and wireless.
Current release - regressions:
- xfrm: fix XFRM_MSG_MAPPING ABI breakage caused by inserting a new
value in the middle of an enum
- unix: fix an issue in unix_shutdown causing the other end
read/write failures
- phy: mdio: fix memory leak
Current release - new code bugs:
- mlx5e: improve MQPRIO resiliency against bad configs
Previous releases - regressions:
- bpf: fix integer overflow leading to OOB access in map element
pre-allocation
- stmmac: dwmac-rk: fix ethernet on rk3399 based devices
- netfilter: conntrack: fix boot failure with
nf_conntrack.enable_hooks=1
- brcmfmac: revert using ISO3166 country code and 0 rev as fallback
- i40e: fix freeing of uninitialized misc IRQ vector
- iavf: fix double unlock of crit_lock
Previous releases - always broken:
- bpf, arm: fix register clobbering in div/mod implementation
- netfilter: nf_tables: correct issues in netlink rule change event
notifications
- dsa: tag_dsa: fix mask for trunked packets
- usb: r8152: don't resubmit rx immediately to avoid soft lockup on
device unplug
- i40e: fix endless loop under rtnl if FW fails to correctly respond
to capability query
- mlx5e: fix rx checksum offload coexistence with ipsec offload
- mlx5: force round second at 1PPS out start time and allow it only
in supported clock modes
- phy: pcs: xpcs: fix incorrect CL37 AN sequence, EEE disable
sequence
Misc:
- xfrm: slightly rejig the new policy uAPI to make it less cryptic"
* tag 'net-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
net: prefer socket bound to interface when not in VRF
iavf: fix double unlock of crit_lock
i40e: Fix freeing of uninitialized misc IRQ vector
i40e: fix endless loop under rtnl
dt-bindings: net: dsa: marvell: fix compatible in example
ionic: move filter sync_needed bit set
gve: report 64bit tx_bytes counter from gve_handle_report_stats()
gve: fix gve_get_stats()
rtnetlink: fix if_nlmsg_stats_size() under estimation
gve: Properly handle errors in gve_assign_qpl
gve: Avoid freeing NULL pointer
gve: Correct available tx qpl check
unix: Fix an issue in unix_shutdown causing the other end read/write failures
net: stmmac: trigger PCS EEE to turn off on link down
net: pcs: xpcs: fix incorrect steps on disable EEE
netlink: annotate data races around nlk->bound
net: pcs: xpcs: fix incorrect CL37 AN sequence
net: sfp: Fix typo in state machine debug string
net/sched: sch_taprio: properly cancel timer from taprio_destroy()
net: bridge: fix under estimation in br_get_linkxstats_size()
...
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-10-07
We've added 7 non-merge commits during the last 8 day(s) which contain
a total of 8 files changed, 38 insertions(+), 21 deletions(-).
The main changes are:
1) Fix ARM BPF JIT to preserve caller-saved regs for DIV/MOD JIT-internal
helper call, from Johan Almbladh.
2) Fix integer overflow in BPF stack map element size calculation when
used with preallocation, from Tatsuhiko Yasumatsu.
3) Fix an AF_UNIX regression due to added BPF sockmap support related
to shutdown handling, from Jiang Wang.
4) Fix a segfault in libbpf when generating light skeletons from objects
without BTF, from Kumar Kartikeya Dwivedi.
5) Fix a libbpf memory leak in strset to free the actual struct strset
itself, from Andrii Nakryiko.
6) Dual-license bpf_insn.h similarly as we did for libbpf and bpftool,
with ACKs from all contributors, from Luca Boccassi.
====================
Link: https://lore.kernel.org/r/20211007135010.21143-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The compiler warns when the data are actually unused:
kernel/trace/trace.c:1712:13: error: ‘trace_create_maxlat_file’ defined but not used [-Werror=unused-function]
1712 | static void trace_create_maxlat_file(struct trace_array *tr,
| ^~~~~~~~~~~~~~~~~~~~~~~~
[Why]
CONFIG_HWLAT_TRACER=n, CONFIG_TRACER_MAX_TRACE=n, CONFIG_OSNOISE_TRACER=y
gcc report warns.
[How]
Now trace_create_maxlat_file will only take effect when
CONFIG_HWLAT_TRACER=y or CONFIG_TRACER_MAX_TRACE=y. In fact, after
adding osnoise trace, it also needs to take effect.
Link: https://lore.kernel.org/all/c1d9e328-ad7c-920b-6c24-9e1598a6421c@infradead.org/
Link: https://lkml.kernel.org/r/20210922025122.3268022-1-liu.yun@linux.dev
Fixes: bce29ac9ce0b ("trace: Add osnoise tracer")
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Tell the compiler to always inline is_percpu_thread()
- Make sure tunable_scaling buffer is null-terminated after an update
in sysfs
- Fix LTP named regression due to cgroup list ordering
* tag 'sched_urgent_for_v5.15_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Always inline is_percpu_thread()
sched/fair: Null terminate buffer when updating tunable_scaling
sched/fair: Add ancestors of unthrottled undecayed cfs_rq
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Make sure the destroy callback is reset when a event initialization
fails
- Update the event constraints for Icelake
- Make sure the active time of an event is updated even for inactive
events
* tag 'perf_urgent_for_v5.15_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: fix userpage->time_enabled of inactive events
perf/x86/intel: Update event constraints for ICX
perf/x86: Reset destroy callback on event init failure
|
|
This patch null-terminates the temporary buffer in sched_scaling_write()
so kstrtouint() does not return failure and checks the value is valid.
Before:
$ cat /sys/kernel/debug/sched/tunable_scaling
1
$ echo 0 > /sys/kernel/debug/sched/tunable_scaling
-bash: echo: write error: Invalid argument
$ cat /sys/kernel/debug/sched/tunable_scaling
1
After:
$ cat /sys/kernel/debug/sched/tunable_scaling
1
$ echo 0 > /sys/kernel/debug/sched/tunable_scaling
$ cat /sys/kernel/debug/sched/tunable_scaling
0
$ echo 3 > /sys/kernel/debug/sched/tunable_scaling
-bash: echo: write error: Invalid argument
Fixes: 8a99b6833c88 ("sched: Move SCHED_DEBUG sysctl to debugfs")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20210927114635.GH3959@techsingularity.net
|
|
Since commit a7b359fc6a37 ("sched/fair: Correctly insert cfs_rq's to
list on unthrottle") we add cfs_rqs with no runnable tasks but not fully
decayed into the load (leaf) list. We may ignore adding some ancestors
and therefore breaking tmp_alone_branch invariant. This broke LTP test
cfs_bandwidth01 and it was partially fixed in commit fdaba61ef8a2
("sched/fair: Ensure that the CFS parent is added after unthrottling").
I noticed the named test still fails even with the fix (but with low
probability, 1 in ~1000 executions of the test). The reason is when
bailing out of unthrottle_cfs_rq early, we may miss adding ancestors of
the unthrottled cfs_rq, thus, not joining tmp_alone_branch properly.
Fix this by adding ancestors if we notice the unthrottled cfs_rq was
added to the load list.
Fixes: a7b359fc6a37 ("sched/fair: Correctly insert cfs_rq's to list on unthrottle")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Odin Ugedal <odin@uged.al>
Link: https://lore.kernel.org/r/20210917153037.11176-1-mkoutny@suse.com
|
|
Users of rdpmc rely on the mmapped user page to calculate accurate
time_enabled. Currently, userpage->time_enabled is only updated when the
event is added to the pmu. As a result, inactive event (due to counter
multiplexing) does not have accurate userpage->time_enabled. This can
be reproduced with something like:
/* open 20 task perf_event "cycles", to create multiplexing */
fd = perf_event_open(); /* open task perf_event "cycles" */
userpage = mmap(fd); /* use mmap and rdmpc */
while (true) {
time_enabled_mmap = xxx; /* use logic in perf_event_mmap_page */
time_enabled_read = read(fd).time_enabled;
if (time_enabled_mmap > time_enabled_read)
BUG();
}
Fix this by updating userpage for inactive events in merge_sched_in.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-and-tested-by: Lucian Grijincu <lucian@fb.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210929194313.2398474-1-songliubraving@fb.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from mac80211, netfilter and bpf.
Current release - regressions:
- bpf, cgroup: assign cgroup in cgroup_sk_alloc when called from
interrupt
- mdio: revert mechanical patches which broke handling of optional
resources
- dev_addr_list: prevent address duplication
Previous releases - regressions:
- sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb
(NULL deref)
- Revert "mac80211: do not use low data rates for data frames with no
ack flag", fixing broadcast transmissions
- mac80211: fix use-after-free in CCMP/GCMP RX
- netfilter: include zone id in tuple hash again, minimize collisions
- netfilter: nf_tables: unlink table before deleting it (race -> UAF)
- netfilter: log: work around missing softdep backend module
- mptcp: don't return sockets in foreign netns
- sched: flower: protect fl_walk() with rcu (race -> UAF)
- ixgbe: fix NULL pointer dereference in ixgbe_xdp_setup
- smsc95xx: fix stalled rx after link change
- enetc: fix the incorrect clearing of IF_MODE bits
- ipv4: fix rtnexthop len when RTA_FLOW is present
- dsa: mv88e6xxx: 6161: use correct MAX MTU config method for this
SKU
- e100: fix length calculation & buffer overrun in ethtool::get_regs
Previous releases - always broken:
- mac80211: fix using stale frag_tail skb pointer in A-MSDU tx
- mac80211: drop frames from invalid MAC address in ad-hoc mode
- af_unix: fix races in sk_peer_pid and sk_peer_cred accesses (race
-> UAF)
- bpf, x86: Fix bpf mapping of atomic fetch implementation
- bpf: handle return value of BPF_PROG_TYPE_STRUCT_OPS prog
- netfilter: ip6_tables: zero-initialize fragment offset
- mhi: fix error path in mhi_net_newlink
- af_unix: return errno instead of NULL in unix_create1() when over
the fs.file-max limit
Misc:
- bpf: exempt CAP_BPF from checks against bpf_jit_limit
- netfilter: conntrack: make max chain length random, prevent
guessing buckets by attackers
- netfilter: nf_nat_masquerade: make async masq_inet6_event handling
generic, defer conntrack walk to work queue (prevent hogging RTNL
lock)"
* tag 'net-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
af_unix: fix races in sk_peer_pid and sk_peer_cred accesses
net: stmmac: fix EEE init issue when paired with EEE capable PHYs
net: dev_addr_list: handle first address in __hw_addr_add_ex
net: sched: flower: protect fl_walk() with rcu
net: introduce and use lock_sock_fast_nested()
net: phy: bcm7xxx: Fixed indirect MMD operations
net: hns3: disable firmware compatible features when uninstall PF
net: hns3: fix always enable rx vlan filter problem after selftest
net: hns3: PF enable promisc for VF when mac table is overflow
net: hns3: fix show wrong state when add existing uc mac address
net: hns3: fix mixed flag HCLGE_FLAG_MQPRIO_ENABLE and HCLGE_FLAG_DCB_ENABLE
net: hns3: don't rollback when destroy mqprio fail
net: hns3: remove tc enable checking
net: hns3: do not allow call hns3_nic_net_open repeatedly
ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup
net: bridge: mcast: Associate the seqcount with its protecting lock.
net: mdio-ipq4019: Fix the error for an optional regs resource
net: hns3: fix hclge_dbg_dump_tm_pg() stack usage
net: mdio: mscc-miim: Fix the mdio controller
af_unix: Return errno instead of NULL in unix_create1().
...
|
|
In prealloc_elems_and_freelist(), the multiplication to calculate the
size passed to bpf_map_area_alloc() could lead to an integer overflow.
As a result, out-of-bounds write could occur in pcpu_freelist_populate()
as reported by KASAN:
[...]
[ 16.968613] BUG: KASAN: slab-out-of-bounds in pcpu_freelist_populate+0xd9/0x100
[ 16.969408] Write of size 8 at addr ffff888104fc6ea0 by task crash/78
[ 16.970038]
[ 16.970195] CPU: 0 PID: 78 Comm: crash Not tainted 5.15.0-rc2+ #1
[ 16.970878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[ 16.972026] Call Trace:
[ 16.972306] dump_stack_lvl+0x34/0x44
[ 16.972687] print_address_description.constprop.0+0x21/0x140
[ 16.973297] ? pcpu_freelist_populate+0xd9/0x100
[ 16.973777] ? pcpu_freelist_populate+0xd9/0x100
[ 16.974257] kasan_report.cold+0x7f/0x11b
[ 16.974681] ? pcpu_freelist_populate+0xd9/0x100
[ 16.975190] pcpu_freelist_populate+0xd9/0x100
[ 16.975669] stack_map_alloc+0x209/0x2a0
[ 16.976106] __sys_bpf+0xd83/0x2ce0
[...]
The possibility of this overflow was originally discussed in [0], but
was overlooked.
Fix the integer overflow by changing elem_size to u64 from u32.
[0] https://lore.kernel.org/bpf/728b238e-a481-eb50-98e9-b0f430ab01e7@gmail.com/
Fixes: 557c0c6e7df8 ("bpf: convert stackmap to pre-allocation")
Signed-off-by: Tatsuhiko Yasumatsu <th.yasumatsu@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210930135545.173698-1-th.yasumatsu@gmail.com
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-09-28
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 14 day(s) which contain
a total of 11 files changed, 139 insertions(+), 53 deletions(-).
The main changes are:
1) Fix MIPS JIT jump code emission for too large offsets, from Piotr Krysiuk.
2) Fix x86 JIT atomic/fetch emission when dst reg maps to rax, from Johan Almbladh.
3) Fix cgroup_sk_alloc corner case when called from interrupt, from Daniel Borkmann.
4) Fix segfault in libbpf's linker for objects without BTF, from Kumar Kartikeya Dwivedi.
5) Fix bpf_jit_charge_modmem for applications with CAP_BPF, from Lorenz Bauer.
6) Fix return value handling for struct_ops BPF programs, from Hou Tao.
7) Various fixes to BPF selftests, from Jiri Benc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
,
|
|
When CONFIG_MODULE_UNLOAD is disabled, the module->exit member
is not defined, causing a build failure:
kernel/module.c:4493:8: error: no member named 'exit' in 'struct module'
mod->exit = *exit;
add an #ifdef block around this.
Fixes: cf68fffb66d6 ("add support for Clang CFI")
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
If cgroup_sk_alloc() is called from interrupt context, then just assign the
root cgroup to skcd->cgroup. Prior to commit 8520e224f547 ("bpf, cgroups:
Fix cgroup v2 fallback on v1/v2 mixed mode") we would just return, and later
on in sock_cgroup_ptr(), we were NULL-testing the cgroup in fast-path, and
iff indeed NULL returning the root cgroup (v ?: &cgrp_dfl_root.cgrp). Rather
than re-adding the NULL-test to the fast-path we can just assign it once from
cgroup_sk_alloc() given v1/v2 handling has been simplified. The migration from
NULL test with returning &cgrp_dfl_root.cgrp to assigning &cgrp_dfl_root.cgrp
directly does /not/ change behavior for callers of sock_cgroup_ptr().
syzkaller was able to trigger a splat in the legacy netrom code base, where
the RX handler in nr_rx_frame() calls nr_make_new() which calls sk_alloc()
and therefore cgroup_sk_alloc() with in_interrupt() condition. Thus the NULL
skcd->cgroup, where it trips over on cgroup_sk_free() side given it expects
a non-NULL object. There are a few other candidates aside from netrom which
have similar pattern where in their accept-like implementation, they just call
to sk_alloc() and thus cgroup_sk_alloc() instead of sk_clone_lock() with the
corresponding cgroup_sk_clone() which then inherits the cgroup from the parent
socket. None of them are related to core protocols where BPF cgroup programs
are running from. However, in future, they should follow to implement a similar
inheritance mechanism.
Additionally, with a !CONFIG_CGROUP_NET_PRIO and !CONFIG_CGROUP_NET_CLASSID
configuration, the same issue was exposed also prior to 8520e224f547 due to
commit e876ecc67db8 ("cgroup: memcg: net: do not associate sock with unrelated
cgroup") which added the early in_interrupt() return back then.
Fixes: 8520e224f547 ("bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode")
Fixes: e876ecc67db8 ("cgroup: memcg: net: do not associate sock with unrelated cgroup")
Reported-by: syzbot+df709157a4ecaf192b03@syzkaller.appspotmail.com
Reported-by: syzbot+533f389d4026d86a2a95@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: syzbot+df709157a4ecaf192b03@syzkaller.appspotmail.com
Tested-by: syzbot+533f389d4026d86a2a95@syzkaller.appspotmail.com
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/bpf/20210927123921.21535-1-daniel@iogearbox.net
|
|
When introducing CAP_BPF, bpf_jit_charge_modmem() was not changed to treat
programs with CAP_BPF as privileged for the purpose of JIT memory allocation.
This means that a program without CAP_BPF can block a program with CAP_BPF
from loading a program.
Fix this by checking bpf_capable() in bpf_jit_charge_modmem().
Fixes: 2c78ee898d8f ("bpf: Implement CAP_BPF")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922111153.19843-1-lmb@cloudflare.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix for the recently introduced regression in posix CPU
timers which failed to stop the timer when requested. That caused
unexpected signals to be sent to the process/thread causing
malfunction"
* tag 'timers-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Prevent spuriously armed 0-value itimer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for interrupt chip drivers:
- Work around a bad GIC integration on a Renesas platform which can't
handle byte-sized MMIO access
- Plug a potential memory leak in the GICv4 driver
- Fix a regression in the Armada 370-XP IPI code which was caused by
issuing EOI instack of ACK.
- A couple of small fixes here and there"
* tag 'irq-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic: Work around broken Renesas integration
irqchip/renesas-rza1: Use semicolons instead of commas
irqchip/gic-v3-its: Fix potential VPE leak on error
irqchip/goldfish-pic: Select GENERIC_IRQ_CHIP to fix build
irqchip/mbigen: Repair non-kernel-doc notation
irqdomain: Change the type of 'size' in __irq_domain_add() to be consistent
irqchip/armada-370-xp: Fix ack/eoi breakage
Documentation: Fix irq-domain.rst build warning
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- keep ctrl->namespaces ordered (Christoph Hellwig)
- fix incorrect h2cdata pdu offset accounting in nvme-tcp (Sagi
Grimberg)
- handled updated hw_queues in nvme-fc more carefully (Daniel
Wagner, James Smart)
- md lock order fix (Christoph)
- fallocate locking fix (Ming)
- blktrace UAF fix (Zhihao)
- rq-qos bio tracking fix (Ming)
* tag 'block-5.15-2021-09-25' of git://git.kernel.dk/linux-block:
block: hold ->invalidate_lock in blkdev_fallocate
blktrace: Fix uaf in blk_trace access after removing by sysfs
block: don't call rq_qos_ops->done_bio if the bio isn't tracked
md: fix a lock order reversal in md_alloc
nvme: keep ctrl->namespaces ordered
nvme-tcp: fix incorrect h2cdata pdu offset accounting
nvme-fc: remove freeze/unfreeze around update_nr_hw_queues
nvme-fc: avoid race between time out and tear down
nvme-fc: update hardware queues before using them
|
|
There is an use-after-free problem triggered by following process:
P1(sda) P2(sdb)
echo 0 > /sys/block/sdb/trace/enable
blk_trace_remove_queue
synchronize_rcu
blk_trace_free
relay_close
rcu_read_lock
__blk_add_trace
trace_note_tsk
(Iterate running_trace_list)
relay_close_buf
relay_destroy_buf
kfree(buf)
trace_note(sdb's bt)
relay_reserve
buf->offset <- nullptr deference (use-after-free) !!!
rcu_read_unlock
[ 502.714379] BUG: kernel NULL pointer dereference, address:
0000000000000010
[ 502.715260] #PF: supervisor read access in kernel mode
[ 502.715903] #PF: error_code(0x0000) - not-present page
[ 502.716546] PGD 103984067 P4D 103984067 PUD 17592b067 PMD 0
[ 502.717252] Oops: 0000 [#1] SMP
[ 502.720308] RIP: 0010:trace_note.isra.0+0x86/0x360
[ 502.732872] Call Trace:
[ 502.733193] __blk_add_trace.cold+0x137/0x1a3
[ 502.733734] blk_add_trace_rq+0x7b/0xd0
[ 502.734207] blk_add_trace_rq_issue+0x54/0xa0
[ 502.734755] blk_mq_start_request+0xde/0x1b0
[ 502.735287] scsi_queue_rq+0x528/0x1140
...
[ 502.742704] sg_new_write.isra.0+0x16e/0x3e0
[ 502.747501] sg_ioctl+0x466/0x1100
Reproduce method:
ioctl(/dev/sda, BLKTRACESETUP, blk_user_trace_setup[buf_size=127])
ioctl(/dev/sda, BLKTRACESTART)
ioctl(/dev/sdb, BLKTRACESETUP, blk_user_trace_setup[buf_size=127])
ioctl(/dev/sdb, BLKTRACESTART)
echo 0 > /sys/block/sdb/trace/enable &
// Add delay(mdelay/msleep) before kernel enters blk_trace_free()
ioctl$SG_IO(/dev/sda, SG_IO, ...)
// Enters trace_note_tsk() after blk_trace_free() returned
// Use mdelay in rcu region rather than msleep(which may schedule out)
Remove blk_trace from running_list before calling blk_trace_free() by
sysfs if blk_trace is at Blktrace_running state.
Fixes: c71a896154119f ("blktrace: add ftrace plugin")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20210923134921.109194-1-chengzhihao1@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- Work around a bad GIC integration on a Renesas platform, where the
interconnect cannot deal with byte-sized MMIO accesses
- Cleanup another Renesas driver abusing the comma operator
- Fix a potential GICv4 memory leak on an error path
- Make the type of 'size' consistent with the rest of the code in
__irq_domain_add()
- Fix a regression in the Armada 370-XP IPI path
- Fix the build for the obviously unloved goldfish-pic
- Some documentation fixes
Link: https://lore.kernel.org/r/20210924090933.2766857-1-maz@kernel.org
|
|
Resetting/stopping an itimer eventually leads to it being reprogrammed
with an actual "0" value. As a result the itimer expires on the next
tick, triggering an unexpected signal.
To fix this, make sure that
struct signal_struct::it[CPUCLOCK_PROF/VIRT]::expires is set to 0 when
setitimer() passes a 0 it_value, indicating that the timer must stop.
Fixes: 406dd42bd1ba ("posix-cpu-timers: Force next expiration recalc after itimer reset")
Reported-by: Victor Stinner <vstinner@redhat.com>
Reported-by: Chris Hixon <linux-kernel-bugs@hixontech.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210913145332.232023-1-frederic@kernel.org
|
|
Invoke rseq_handle_notify_resume() from tracehook_notify_resume() now
that the two function are always called back-to-back by architectures
that have rseq. The rseq helper is stubbed out for architectures that
don't support rseq, i.e. this is a nop across the board.
Note, tracehook_notify_resume() is horribly named and arguably does not
belong in tracehook.h as literally every line of code in it has nothing
to do with tracing. But, that's been true since commit a42c6ded827d
("move key_repace_session_keyring() into tracehook_notify_resume()")
first usurped tracehook_notify_resume() back in 2012. Punt cleaning that
mess up to future patches.
No functional change intended.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210901203030.1292304-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Invoke rseq's NOTIFY_RESUME handler when processing the flag prior to
transferring to a KVM guest, which is roughly equivalent to an exit to
userspace and processes many of the same pending actions. While the task
cannot be in an rseq critical section as the KVM path is reachable only
by via ioctl(KVM_RUN), the side effects that apply to rseq outside of a
critical section still apply, e.g. the current CPU needs to be updated if
the task is migrated.
Clearing TIF_NOTIFY_RESUME without informing rseq can lead to segfaults
and other badness in userspace VMMs that use rseq in combination with KVM,
e.g. due to the CPU ID being stale after task migration.
Fixes: 72c3c0fe54a3 ("x86/kvm: Use generic xfer to guest work function")
Reported-by: Peter Foley <pefoley@google.com>
Bisected-by: Doug Evans <dje@google.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210901203030.1292304-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The 'size' is used in struct_size(domain, revmap, size) and its input
parameter type is 'size_t'(unsigned int).
Changing the size to 'unsigned int' to make the type consistent.
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210916025203.44841-1-cuibixuan@huawei.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fix from Thomas Gleixner:
"A single fix for the perf core where a value read with READ_ONCE() was
checked and then reread which makes all the checks invalid. Reuse the
already read value instead"
* tag 'perf-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
events: Reuse value read using READ_ONCE instead of re-reading it
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"A set of updates for the RT specific reader/writer locking base code:
- Make the fast path reader ordering guarantees correct.
- Code reshuffling to make the fix simpler"
[ This plays ugly games with atomic_add_return_release() because we
don't have a plain atomic_add_release(), and should really be cleaned
up, I think - Linus ]
* tag 'locking-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwbase: Take care of ordering guarantee for fastpath reader
locking/rwbase: Extract __rwbase_write_trylock()
locking/rwbase: Properly match set_and_save_state() to restore_state()
|
|
Pull dma-mapping fixes from Christoph Hellwig:
- page align size in sparc32 arch_dma_alloc (Andreas Larsson)
- tone down a new dma-debug message (Hamza Mahfooz)
- fix the kerneldoc for dma_map_sg_attrs (me)
* tag 'dma-mapping-5.15-1' of git://git.infradead.org/users/hch/dma-mapping:
sparc32: page align size in arch_dma_alloc
dma-debug: prevent an error message from causing runtime problems
dma-mapping: fix the kerneldoc for dma_map_sg_attrs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf.
Current release - regressions:
- vhost_net: fix OoB on sendmsg() failure
- mlx5: bridge, fix uninitialized variable usage
- bnxt_en: fix error recovery regression
Current release - new code bugs:
- bpf, mm: fix lockdep warning triggered by stack_map_get_build_id_offset()
Previous releases - regressions:
- r6040: restore MDIO clock frequency after MAC reset
- tcp: fix tp->undo_retrans accounting in tcp_sacktag_one()
- dsa: flush switchdev workqueue before tearing down CPU/DSA ports
Previous releases - always broken:
- ptp: dp83640: don't define PAGE0, avoid compiler warning
- igc: fix tunnel segmentation offloads
- phylink: update SFP selected interface on advertising changes
- stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume
- mlx5e: fix mutual exclusion between CQE compression and HW TS
Misc:
- bpf, cgroups: fix cgroup v2 fallback on v1/v2 mixed mode
- sfc: fallback for lack of xdp tx queues
- hns3: add option to turn off page pool feature"
* tag 'net-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits)
mlxbf_gige: clear valid_polarity upon open
igc: fix tunnel offloading
net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assert
net: wan: wanxl: define CROSS_COMPILE_M68K
selftests: nci: replace unsigned int with int
net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports
Revert "net: phy: Uniform PHY driver access"
net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup
ptp: dp83640: don't define PAGE0
bnx2x: Fix enabling network interfaces without VFs
Revert "Revert "ipv4: fix memory leaks in ip_cmsg_send() callers""
tcp: fix tp->undo_retrans accounting in tcp_sacktag_one()
net-caif: avoid user-triggerable WARN_ON(1)
bpf, selftests: Add test case for mixed cgroup v1/v2
bpf, selftests: Add cgroup v1 net_cls classid helpers
bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode
bpf: Add oversize check before call kvcalloc()
net: hns3: fix the timing issue of VF clearing interrupt sources
net: hns3: fix the exception when query imp info
net: hns3: disable mac in flr process
...
|
|
Readers of rwbase can lock and unlock without taking any inner lock, if
that happens, we need the ordering provided by atomic operations to
satisfy the ordering semantics of lock/unlock. Without that, considering
the follow case:
{ X = 0 initially }
CPU 0 CPU 1
===== =====
rt_write_lock();
X = 1
rt_write_unlock():
atomic_add(READER_BIAS - WRITER_BIAS, ->readers);
// ->readers is READER_BIAS.
rt_read_lock():
if ((r = atomic_read(->readers)) < 0) // True
atomic_try_cmpxchg(->readers, r, r + 1); // succeed.
<acquire the read lock via fast path>
r1 = X; // r1 may be 0, because nothing prevent the reordering
// of "X=1" and atomic_add() on CPU 1.
Therefore audit every usage of atomic operations that may happen in a
fast path, and add necessary barriers.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20210909110203.953991276@infradead.org
|
|
The code in rwbase_write_lock() is a little non-obvious vs the
read+set 'trylock', extract the sequence into a helper function to
clarify the code.
This also provides a single site to fix fast-path ordering.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/YUCq3L+u44NDieEJ@hirez.programming.kicks-ass.net
|
|
Noticed while looking at the readers race.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20210909110203.828203010@infradead.org
|
|
In perf_event_addr_filters_apply, the task associated with
the event (event->ctx->task) is read using READ_ONCE at the beginning
of the function, checked, and then re-read from event->ctx->task,
voiding all guarantees of the checks. Reuse the value that was read by
READ_ONCE to ensure the consistency of the task struct throughout the
function.
Fixes: 375637bc52495 ("perf/core: Introduce address range filtering")
Signed-off-by: Baptiste Lepers <baptiste.lepers@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210906015310.12802-1-baptiste.lepers@gmail.com
|
|
The boot-time allocation interface for memblock is a mess, with
'memblock_alloc()' returning a virtual pointer, but then you are
supposed to free it with 'memblock_free()' that takes a _physical_
address.
Not only is that all kinds of strange and illogical, but it actually
causes bugs, when people then use it like a normal allocation function,
and it fails spectacularly on a NULL pointer:
https://lore.kernel.org/all/20210912140820.GD25450@xsang-OptiPlex-9020/
or just random memory corruption if the debug checks don't catch it:
https://lore.kernel.org/all/61ab2d0c-3313-aaab-514c-e15b7aa054a0@suse.cz/
I really don't want to apply patches that treat the symptoms, when the
fundamental cause is this horribly confusing interface.
I started out looking at just automating a sane replacement sequence,
but because of this mix or virtual and physical addresses, and because
people have used the "__pa()" macro that can take either a regular
kernel pointer, or just the raw "unsigned long" address, it's all quite
messy.
So this just introduces a new saner interface for freeing a virtual
address that was allocated using 'memblock_alloc()', and that was kept
as a regular kernel pointer. And then it converts a couple of users
that are obvious and easy to test, including the 'xbc_nodes' case in
lib/bootconfig.c that caused problems.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: 40caa127f3c7 ("init: bootconfig: Remove all bootconfig data when the init memory is removed")
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently if a function ptr in struct_ops has a return value, its
caller will get a random return value from it, because the return
value of related BPF_PROG_TYPE_STRUCT_OPS prog is just dropped.
So adding a new flag BPF_TRAMP_F_RET_FENTRY_RET to tell bpf trampoline
to save and return the return value of struct_ops prog if ret_size of
the function ptr is greater than 0. Also restricting the flag to be
used alone.
Fixes: 85d33df357b6 ("bpf: Introduce BPF_MAP_TYPE_STRUCT_OPS")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210914023351.3664499-1-houtao1@huawei.com
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-09-14
The following pull-request contains BPF updates for your *net* tree.
We've added 7 non-merge commits during the last 13 day(s) which contain
a total of 18 files changed, 334 insertions(+), 193 deletions(-).
The main changes are:
1) Fix mmap_lock lockdep splat in BPF stack map's build_id lookup, from Yonghong Song.
2) Fix BPF cgroup v2 program bypass upon net_cls/prio activation, from Daniel Borkmann.
3) Fix kvcalloc() BTF line info splat on oversized allocation attempts, from Bixuan Cui.
4) Fix BPF selftest build of task_pt_regs test for arm64/s390, from Jean-Philippe Brucker.
5) Fix BPF's disasm.{c,h} to dual-license so that it is aligned with bpftool given the former
is a build dependency for the latter, from Daniel Borkmann with ACKs from contributors.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix cgroup v1 interference when non-root cgroup v2 BPF programs are used.
Back in the days, commit bd1060a1d671 ("sock, cgroup: add sock->sk_cgroup")
embedded per-socket cgroup information into sock->sk_cgrp_data and in order
to save 8 bytes in struct sock made both mutually exclusive, that is, when
cgroup v1 socket tagging (e.g. net_cls/net_prio) is used, then cgroup v2
falls back to the root cgroup in sock_cgroup_ptr() (&cgrp_dfl_root.cgrp).
The assumption made was "there is no reason to mix the two and this is in line
with how legacy and v2 compatibility is handled" as stated in bd1060a1d671.
However, with Kubernetes more widely supporting cgroups v2 as well nowadays,
this assumption no longer holds, and the possibility of the v1/v2 mixed mode
with the v2 root fallback being hit becomes a real security issue.
Many of the cgroup v2 BPF programs are also used for policy enforcement, just
to pick _one_ example, that is, to programmatically deny socket related system
calls like connect(2) or bind(2). A v2 root fallback would implicitly cause
a policy bypass for the affected Pods.
In production environments, we have recently seen this case due to various
circumstances: i) a different 3rd party agent and/or ii) a container runtime
such as [0] in the user's environment configuring legacy cgroup v1 net_cls
tags, which triggered implicitly mentioned root fallback. Another case is
Kubernetes projects like kind [1] which create Kubernetes nodes in a container
and also add cgroup namespaces to the mix, meaning programs which are attached
to the cgroup v2 root of the cgroup namespace get attached to a non-root
cgroup v2 path from init namespace point of view. And the latter's root is
out of reach for agents on a kind Kubernetes node to configure. Meaning, any
entity on the node setting cgroup v1 net_cls tag will trigger the bypass
despite cgroup v2 BPF programs attached to the namespace root.
Generally, this mutual exclusiveness does not hold anymore in today's user
environments and makes cgroup v2 usage from BPF side fragile and unreliable.
This fix adds proper struct cgroup pointer for the cgroup v2 case to struct
sock_cgroup_data in order to address these issues; this implicitly also fixes
the tradeoffs being made back then with regards to races and refcount leaks
as stated in bd1060a1d671, and removes the fallback, so that cgroup v2 BPF
programs always operate as expected.
[0] https://github.com/nestybox/sysbox/
[1] https://kind.sigs.k8s.io/
Fixes: bd1060a1d671 ("sock, cgroup: add sock->sk_cgroup")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/bpf/20210913230759.2313-1-daniel@iogearbox.net
|
|
Commit 7661809d493b ("mm: don't allow oversized kvmalloc() calls") add the
oversize check. When the allocation is larger than what kmalloc() supports,
the following warning triggered:
WARNING: CPU: 0 PID: 8408 at mm/util.c:597 kvmalloc_node+0x108/0x110 mm/util.c:597
Modules linked in:
CPU: 0 PID: 8408 Comm: syz-executor221 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:kvmalloc_node+0x108/0x110 mm/util.c:597
Call Trace:
kvmalloc include/linux/mm.h:806 [inline]
kvmalloc_array include/linux/mm.h:824 [inline]
kvcalloc include/linux/mm.h:829 [inline]
check_btf_line kernel/bpf/verifier.c:9925 [inline]
check_btf_info kernel/bpf/verifier.c:10049 [inline]
bpf_check+0xd634/0x150d0 kernel/bpf/verifier.c:13759
bpf_prog_load kernel/bpf/syscall.c:2301 [inline]
__sys_bpf+0x11181/0x126e0 kernel/bpf/syscall.c:4587
__do_sys_bpf kernel/bpf/syscall.c:4691 [inline]
__se_sys_bpf kernel/bpf/syscall.c:4689 [inline]
__x64_sys_bpf+0x78/0x90 kernel/bpf/syscall.c:4689
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Reported-by: syzbot+f3e749d4c662818ae439@syzkaller.appspotmail.com
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210911005557.45518-1-cuibixuan@huawei.com
|
|
Since commit 1243dc518c9d ("cgroup/cpuset: Convert cpuset_mutex to
percpu_rwsem"), cpuset_mutex has been replaced by cpuset_rwsem which is
a percpu rwsem. However, the comments in kernel/cgroup/cpuset.c still
reference cpuset_mutex which are now incorrect.
Change all the references of cpuset_mutex to cpuset_rwsem.
Fixes: 1243dc518c9d ("cgroup/cpuset: Convert cpuset_mutex to percpu_rwsem")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
For some drivers, that use the DMA API. This error message can be reached
several millions of times per second, causing spam to the kernel's printk
buffer and bringing the CPU usage up to 100% (so, it should be rate
limited). However, since there is at least one driver that is in the
mainline and suffers from the error condition, it is more useful to
err_printk() here instead of just rate limiting the error message (in hopes
that it will make it easier for other drivers that suffer from this issue
to be spotted).
Link: https://lkml.kernel.org/r/fd67fbac-64bf-f0ea-01e1-5938ccfab9d0@arm.com
Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Make sure the idle timer expires in hardirq context, on PREEMPT_RT
- Make sure the run-queue balance callback is invoked only on the
outgoing CPU
* tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Prevent balance_push() on remote runqueues
sched/idle: Make the idle timer expire in hard interrupt context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Fix the futex PI requeue machinery to not return to userspace in
inconsistent state
- Avoid a potential null pointer dereference in the ww_mutex deadlock
check
- Other smaller cleanups and optimizations
* tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Fix ww_mutex deadlock check
futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic()
futex: Avoid redundant task lookup
futex: Clarify comment for requeue_pi_wake_futex()
futex: Prevent inconsistent state and exit race
futex: Return error code instead of assigning it without effect
locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Minor fixes to the processing of the bootconfig tree"
* tag 'trace-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
bootconfig: Rename xbc_node_find_child() to xbc_node_find_subkey()
tracing/boot: Fix to check the histogram control param is a leaf node
tracing/boot: Fix trace_boot_hist_add_array() to check array is value
|
|
Currently the bpf selftest "get_stack_raw_tp" triggered the warning:
[ 1411.304463] WARNING: CPU: 3 PID: 140 at include/linux/mmap_lock.h:164 find_vma+0x47/0xa0
[ 1411.304469] Modules linked in: bpf_testmod(O) [last unloaded: bpf_testmod]
[ 1411.304476] CPU: 3 PID: 140 Comm: systemd-journal Tainted: G W O 5.14.0+ #53
[ 1411.304479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 1411.304481] RIP: 0010:find_vma+0x47/0xa0
[ 1411.304484] Code: de 48 89 ef e8 ba f5 fe ff 48 85 c0 74 2e 48 83 c4 08 5b 5d c3 48 8d bf 28 01 00 00 be ff ff ff ff e8 2d 9f d8 00 85 c0 75 d4 <0f> 0b 48 89 de 48 8
[ 1411.304487] RSP: 0018:ffffabd440403db8 EFLAGS: 00010246
[ 1411.304490] RAX: 0000000000000000 RBX: 00007f00ad80a0e0 RCX: 0000000000000000
[ 1411.304492] RDX: 0000000000000001 RSI: ffffffff9776b144 RDI: ffffffff977e1b0e
[ 1411.304494] RBP: ffff9cf5c2f50000 R08: ffff9cf5c3eb25d8 R09: 00000000fffffffe
[ 1411.304496] R10: 0000000000000001 R11: 00000000ef974e19 R12: ffff9cf5c39ae0e0
[ 1411.304498] R13: 0000000000000000 R14: 0000000000000000 R15: ffff9cf5c39ae0e0
[ 1411.304501] FS: 00007f00ae754780(0000) GS:ffff9cf5fba00000(0000) knlGS:0000000000000000
[ 1411.304504] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1411.304506] CR2: 000000003e34343c CR3: 0000000103a98005 CR4: 0000000000370ee0
[ 1411.304508] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1411.304510] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1411.304512] Call Trace:
[ 1411.304517] stack_map_get_build_id_offset+0x17c/0x260
[ 1411.304528] __bpf_get_stack+0x18f/0x230
[ 1411.304541] bpf_get_stack_raw_tp+0x5a/0x70
[ 1411.305752] RAX: 0000000000000000 RBX: 5541f689495641d7 RCX: 0000000000000000
[ 1411.305756] RDX: 0000000000000001 RSI: ffffffff9776b144 RDI: ffffffff977e1b0e
[ 1411.305758] RBP: ffff9cf5c02b2f40 R08: ffff9cf5ca7606c0 R09: ffffcbd43ee02c04
[ 1411.306978] bpf_prog_32007c34f7726d29_bpf_prog1+0xaf/0xd9c
[ 1411.307861] R10: 0000000000000001 R11: 0000000000000044 R12: ffff9cf5c2ef60e0
[ 1411.307865] R13: 0000000000000005 R14: 0000000000000000 R15: ffff9cf5c2ef6108
[ 1411.309074] bpf_trace_run2+0x8f/0x1a0
[ 1411.309891] FS: 00007ff485141700(0000) GS:ffff9cf5fae00000(0000) knlGS:0000000000000000
[ 1411.309896] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1411.311221] syscall_trace_enter.isra.20+0x161/0x1f0
[ 1411.311600] CR2: 00007ff48514d90e CR3: 0000000107114001 CR4: 0000000000370ef0
[ 1411.312291] do_syscall_64+0x15/0x80
[ 1411.312941] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1411.313803] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 1411.314223] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1411.315082] RIP: 0033:0x7f00ad80a0e0
[ 1411.315626] Call Trace:
[ 1411.315632] stack_map_get_build_id_offset+0x17c/0x260
To reproduce, first build `test_progs` binary:
make -C tools/testing/selftests/bpf -j60
and then run the binary at tools/testing/selftests/bpf directory:
./test_progs -t get_stack_raw_tp
The warning is due to commit 5b78ed24e8ec ("mm/pagemap: add mmap_assert_locked()
annotations to find_vma*()") which added mmap_assert_locked() in find_vma()
function. The mmap_assert_locked() function asserts that mm->mmap_lock needs
to be held. But this is not the case for bpf_get_stack() or bpf_get_stackid()
helper (kernel/bpf/stackmap.c), which uses mmap_read_trylock_non_owner()
instead. Since mm->mmap_lock is not held in bpf_get_stack[id]() use case,
the above warning is emitted during test run.
This patch fixed the issue by (1). using mmap_read_trylock() instead of
mmap_read_trylock_non_owner() to satisfy lockdep checking in find_vma(), and
(2). droping lockdep for mmap_lock right before the irq_work_queue(). The
function mmap_read_trylock_non_owner() is also removed since after this
patch nobody calls it any more.
Fixes: 5b78ed24e8ec ("mm/pagemap: add mmap_assert_locked() annotations to find_vma*()")
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Luigi Rizzo <lrizzo@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-mm@kvack.org
Link: https://lore.kernel.org/bpf/20210909155000.1610299-1-yhs@fb.com
|
