| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The current implemented mechanisms to mitigate data disclosure under
speculation mainly address stack and map value oob access from the
speculative domain. However, Piotr discovered that uninitialized BPF
stack is not protected yet, and thus old data from the kernel stack,
potentially including addresses of kernel structures, could still be
extracted from that 512 bytes large window. The BPF stack is special
compared to map values since it's not zero initialized for every
program invocation, whereas map values /are/ zero initialized upon
their initial allocation and thus cannot leak any prior data in either
domain. In the non-speculative domain, the verifier ensures that every
stack slot read must have a prior stack slot write by the BPF program
to avoid such data leaking issue.
However, this is not enough: for example, when the pointer arithmetic
operation moves the stack pointer from the last valid stack offset to
the first valid offset, the sanitation logic allows for any intermediate
offsets during speculative execution, which could then be used to
extract any restricted stack content via side-channel.
Given for unprivileged stack pointer arithmetic the use of unknown
but bounded scalars is generally forbidden, we can simply turn the
register-based arithmetic operation into an immediate-based arithmetic
operation without the need for masking. This also gives the benefit
of reducing the needed instructions for the operation. Given after
the work in 7fedb63a8307 ("bpf: Tighten speculative pointer arithmetic
mask"), the aux->alu_limit already holds the final immediate value for
the offset register with the known scalar. Thus, a simple mov of the
immediate to AX register with using AX as the source for the original
instruction is sufficient and possible now in this case.
Reported-by: Piotr Krysiuk <piotras@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Piotr Krysiuk <piotras@gmail.com>
Reviewed-by: Piotr Krysiuk <piotras@gmail.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
The negation logic for the case where the off_reg is sitting in the
dst register is not correct given then we cannot just invert the add
to a sub or vice versa. As a fix, perform the final bitwise and-op
unconditionally into AX from the off_reg, then move the pointer from
the src to dst and finally use AX as the source for the original
pointer arithmetic operation such that the inversion yields a correct
result. The single non-AX mov in between is possible given constant
blinding is retaining it as it's not an immediate based operation.
Fixes: 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer arithmetic")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Piotr Krysiuk <piotras@gmail.com>
Reviewed-by: Piotr Krysiuk <piotras@gmail.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull Landlock LSM from James Morris:
"Add Landlock, a new LSM from Mickaël Salaün.
Briefly, Landlock provides for unprivileged application sandboxing.
From Mickaël's cover letter:
"The goal of Landlock is to enable to restrict ambient rights (e.g.
global filesystem access) for a set of processes. Because Landlock
is a stackable LSM [1], it makes possible to create safe security
sandboxes as new security layers in addition to the existing
system-wide access-controls. This kind of sandbox is expected to
help mitigate the security impact of bugs or unexpected/malicious
behaviors in user-space applications. Landlock empowers any
process, including unprivileged ones, to securely restrict
themselves.
Landlock is inspired by seccomp-bpf but instead of filtering
syscalls and their raw arguments, a Landlock rule can restrict the
use of kernel objects like file hierarchies, according to the
kernel semantic. Landlock also takes inspiration from other OS
sandbox mechanisms: XNU Sandbox, FreeBSD Capsicum or OpenBSD
Pledge/Unveil.
In this current form, Landlock misses some access-control features.
This enables to minimize this patch series and ease review. This
series still addresses multiple use cases, especially with the
combined use of seccomp-bpf: applications with built-in sandboxing,
init systems, security sandbox tools and security-oriented APIs [2]"
The cover letter and v34 posting is here:
https://lore.kernel.org/linux-security-module/20210422154123.13086-1-mic@digikod.net/
See also:
https://landlock.io/
This code has had extensive design discussion and review over several
years"
Link: https://lore.kernel.org/lkml/50db058a-7dde-441b-a7f9-f6837fe8b69f@schaufler-ca.com/ [1]
Link: https://lore.kernel.org/lkml/f646e1c7-33cf-333f-070c-0a40ad0468cd@digikod.net/ [2]
* tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
landlock: Enable user space to infer supported features
landlock: Add user and kernel documentation
samples/landlock: Add a sandbox manager example
selftests/landlock: Add user space tests
landlock: Add syscall implementations
arch: Wire up Landlock syscalls
fs,security: Add sb_delete hook
landlock: Support filesystem access-control
LSM: Infrastructure management of the superblock
landlock: Add ptrace restrictions
landlock: Set up the security framework and manage credentials
landlock: Add ruleset and domain management
landlock: Add object management
|
|
Pull kvm updates from Paolo Bonzini:
"This is a large update by KVM standards, including AMD PSP (Platform
Security Processor, aka "AMD Secure Technology") and ARM CoreSight
(debug and trace) changes.
ARM:
- CoreSight: Add support for ETE and TRBE
- Stage-2 isolation for the host kernel when running in protected
mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- AMD PSP driver changes
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation, zap under
read lock, enable/disably dirty page logging under read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing the
architecture-specific code
- a handful of "Get rid of oprofile leftovers" patches
- Some selftests improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
KVM: selftests: Speed up set_memory_region_test
selftests: kvm: Fix the check of return value
KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
KVM: SVM: Skip SEV cache flush if no ASIDs have been used
KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
KVM: SVM: Drop redundant svm_sev_enabled() helper
KVM: SVM: Move SEV VMCB tracking allocation to sev.c
KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
KVM: SVM: Unconditionally invoke sev_hardware_teardown()
KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
KVM: SVM: Move SEV module params/variables to sev.c
KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
KVM: SVM: Zero out the VMCB array used to track SEV ASID association
x86/sev: Drop redundant and potentially misleading 'sev_enabled'
KVM: x86: Move reverse CPUID helpers to separate header file
KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
...
|
|
The pattern prefixed with '/' matches files in the same directory,
but not ones in sub-directories.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Andra Paraschiv <andraprs@amazon.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Gabriel Krisman Bertazi <krisman@collabora.com>
|
|
If the timestamp of the .config file is updated, config_data.gz is
regenerated, then vmlinux is re-linked. This occurs even if the content
of the .config has not changed at all.
This issue was mitigated by commit 67424f61f813 ("kconfig: do not write
.config if the content is the same"); Kconfig does not update the
.config when it ends up with the identical configuration.
The issue is remaining when the .config is created by *_defconfig with
some config fragment(s) applied on top.
This is typical for powerpc and mips, where several *_defconfig targets
are constructed by using merge_config.sh.
One workaround is to have the copy of the .config. The filechk rule
updates the copy, kernel/config_data, by checking the content instead
of the timestamp.
With this commit, the second run with the same configuration avoids
the needless rebuilds.
$ make ARCH=mips defconfig all
[ snip ]
$ make ARCH=mips defconfig all
*** Default configuration is based on target '32r2el_defconfig'
Using ./arch/mips/configs/generic_defconfig as base
Merging arch/mips/configs/generic/32r2.config
Merging arch/mips/configs/generic/el.config
Merging ./arch/mips/configs/generic/board-boston.config
Merging ./arch/mips/configs/generic/board-ni169445.config
Merging ./arch/mips/configs/generic/board-ocelot.config
Merging ./arch/mips/configs/generic/board-ranchu.config
Merging ./arch/mips/configs/generic/board-sead-3.config
Merging ./arch/mips/configs/generic/board-xilfpga.config
#
# configuration written to .config
#
SYNC include/config/auto.conf
CALL scripts/checksyscalls.sh
CALL scripts/atomic/check-atomics.sh
CHK include/generated/compile.h
CHK include/generated/autoksyms.h
Reported-by: Elliot Berman <eberman@codeaurora.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
timeconst.h and hz.bc used to exist in kernel/.
Commit 5cee96459726 ("time/timers: Move all time(r) related files into
kernel/time") moved them to kernel/time/.
Commit 0a227985d4a9 ("time: Move timeconst.h into include/generated")
moved timeconst.h to include/generated/ and removed hz.bc .
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Merge misc updates from Andrew Morton:
"A few misc subsystems and some of MM.
175 patches.
Subsystems affected by this patch series: ia64, kbuild, scripts, sh,
ocfs2, kfifo, vfs, kernel/watchdog, and mm (slab-generic, slub,
kmemleak, debug, pagecache, msync, gup, memremap, memcg, pagemap,
mremap, dma, sparsemem, vmalloc, documentation, kasan, initialization,
pagealloc, and memory-failure)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (175 commits)
mm/memory-failure: unnecessary amount of unmapping
mm/mmzone.h: fix existing kernel-doc comments and link them to core-api
mm: page_alloc: ignore init_on_free=1 for debug_pagealloc=1
net: page_pool: use alloc_pages_bulk in refill code path
net: page_pool: refactor dma_map into own function page_pool_dma_map
SUNRPC: refresh rq_pages using a bulk page allocator
SUNRPC: set rq_page_end differently
mm/page_alloc: inline __rmqueue_pcplist
mm/page_alloc: optimize code layout for __alloc_pages_bulk
mm/page_alloc: add an array-based interface to the bulk page allocator
mm/page_alloc: add a bulk page allocator
mm/page_alloc: rename alloced to allocated
mm/page_alloc: duplicate include linux/vmalloc.h
mm, page_alloc: avoid page_to_pfn() in move_freepages()
mm/Kconfig: remove default DISCONTIGMEM_MANUAL
mm: page_alloc: dump migrate-failed pages
mm/mempolicy: fix mpol_misplaced kernel-doc
mm/mempolicy: rewrite alloc_pages_vma documentation
mm/mempolicy: rewrite alloc_pages documentation
mm/mempolicy: rename alloc_pages_current to alloc_pages
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"There is a lot going on!
Core changes:
- A semantic change to handle pinmux and pinconf in explicit order
while up until now we depended on the semantic order in the device
tree. The device tree is a functional programming language and does
not imply any order, so the right thing is for the pin control core
to provide these semantics.
- Add a new pinmux-select debugfs file which makes it possible to go
in and select functions for a pin manually (iteratively, at the
prompt) for debugging purposes.
- Fixes to gpio regmap handling for a new pin control driver making
use of regmap-gpio.
- Use octal permissions on debugfs files.
New drivers:
- A massive rewrite of the former custom pin control driver for MIPS
Broadcom devices to instead use the pin control subsystem. New pin
control drivers for BCM6345, BCM6328, BCM6358, BCM6362, BCM6368,
BCM63268 and BCM6318 SoC variants are implemented.
- Support for PM8350, PM8350B, PM8350C, PMK8350, PMR735A and PMR735B
in the Qualcomm PMIC GPIO driver. Also the two GPIOs on PM8008 are
supported.
- Support for the Rockchip RK3568/RK3566 pin controller.
- Support for Ingenic JZ4730, JZ4750, JZ4755, JZ4775 and X2000.
- Support for Mediatek MTK8195.
- Add a new Xilinx ZynqMP pin control driver.
Driver improvements and non-urgent fixes:
- Modularization and improvements of the Rockchip drivers.
- Some new pins added to the description of new Renesas SoCs.
- Clarifications of the GPIO base calculation in the Intel driver.
- Fix the function names for the MPP54 and MPP55 pins in the Armada
CP110 pin controller.
- GPIO wakeup interrupt map for Qualcomm SC7280 and SM8350.
- Support for ACPI probing of the Qualcomm SC8180x.
- Fix interrupt clear status on rockchip
- Fix some missing pins on the Ingenic JZ4770, some semantic fixes
for the behaviour of the Ingenic pin controller. Add DMIC pins for
JZ4780, X1000, X1500 and X1830.
- A slew of janitorial like of_node_put() calls"
* tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits)
pinctrl: Add Xilinx ZynqMP pinctrl driver support
firmware: xilinx: Add pinctrl support
pinctrl: rockchip: do coding style for mux route struct
pinctrl: Add PIN_CONFIG_MODE_PWM to enum pin_config_param
pinctrl: Introduce MODE group in enum pin_config_param
pinctrl: Keep enum pin_config_param ordered by name
dt-bindings: pinctrl: Add binding for ZynqMP pinctrl driver
pinctrl: core: Fix kernel doc string for pin_get_name()
pinctrl: mediatek: use spin lock in mtk_rmw
pinctrl: add drive for I2C related pins on MT8195
pinctrl: add pinctrl driver on mt8195
dt-bindings: pinctrl: mt8195: add pinctrl file and binding document
pinctrl: Ingenic: Add pinctrl driver for X2000.
pinctrl: Ingenic: Add pinctrl driver for JZ4775.
pinctrl: Ingenic: Add pinctrl driver for JZ4755.
pinctrl: Ingenic: Add pinctrl driver for JZ4750.
pinctrl: Ingenic: Add pinctrl driver for JZ4730.
dt-bindings: pinctrl: Add bindings for new Ingenic SoCs.
pinctrl: Ingenic: Reformat the code.
pinctrl: Ingenic: Add DMIC pins support for Ingenic SoCs.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Fix an age old bug involving jump_calls and static_labels when
CONFIG_MODULE_UNLOAD=n.
When CONFIG_MODULE_UNLOAD=n, it means you can't unload modules, so
normally the __exit sections of a module are not loaded at all.
However, dynamic code patching (jump_label, static_call, alternatives)
can have sites in __exit sections even if __exit is never executed.
Reported by Peter Zijlstra:
'Alternatives, jump_labels and static_call all can have relocations
into __exit code. Not loading it at all would be BAD.'
Therefore, load the __exit sections even when CONFIG_MODULE_UNLOAD=n,
and discard them after init"
* tag 'modules-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: treat exit sections the same as init sections when !CONFIG_MODULE_UNLOAD
|
|
Add the irq_work_queue() call stack into the KASAN auxiliary stack in
order to improve KASAN reports. this will let us know where the irq work
be queued.
Link: https://lkml.kernel.org/r/20210331063202.28770-1-qiang.zhang@windriver.com
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Walter Wu <walter-zh.wu@mediatek.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Why record task_work_add() call stack? Syzbot reports many use-after-free
issues for task_work, see [1]. After seeing the free stack and the
current auxiliary stack, we think they are useless, we don't know where
the work was registered. This work may be the free call stack, so we miss
the root cause and don't solve the use-after-free.
Add the task_work_add() call stack into the KASAN auxiliary stack in order
to improve KASAN reports. It helps programmers solve use-after-free
issues.
[1]: https://groups.google.com/g/syzkaller-bugs/search?q=kasan%20use-after-free%20task_work_run
Link: https://lkml.kernel.org/r/20210316024410.19967-1-walter-zh.wu@mediatek.com
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
vunmap will remove ptes.
Link: https://lkml.kernel.org/r/20210322021806.892164-3-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Cédric Le Goater <clg@kaod.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Current users of the rstat code can source root-level statistics from
the native counters of their respective subsystem, allowing them to
forego aggregation at the root level. This optimization is currently
implemented inside the generic rstat code, which doesn't track the root
cgroup and doesn't invoke the subsystem flush callbacks on it.
However, the memory controller cannot do this optimization, because
cgroup1 breaks out memory specifically for the local level, including at
the root level. In preparation for the memory controller switching to
rstat, move the optimization from rstat core to the controllers.
Afterwards, rstat will always track the root cgroup for changes and
invoke the subsystem callbacks on it; and it's up to the subsystem to
special-case and skip aggregation of the root cgroup if it can source
this information through other, cheaper means.
This is the case for the io controller and the cgroup base stats. In
their respective flush callbacks, check whether the parent is the root
cgroup, and if so, skip the unnecessary upward propagation.
The extra cost of tracking the root cgroup is negligible: on stat
changes, we actually remove a branch that checks for the root. The
queueing for a flush touches only per-cpu data, and only the first stat
change since a flush requires a (per-cpu) lock.
Link: https://lkml.kernel.org/r/20210209163304.77088-6-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Rstat currently only supports the default hierarchy in cgroup2. In
order to replace memcg's private stats infrastructure - used in both
cgroup1 and cgroup2 - with rstat, the latter needs to support cgroup1.
The initialization and destruction callbacks for regular cgroups are
already in place. Remove the cgroup_on_dfl() guards to handle cgroup1.
The initialization of the root cgroup is currently hardcoded to only
handle cgrp_dfl_root.cgrp. Move those callbacks to cgroup_setup_root()
and cgroup_destroy_root() to handle the default root as well as the
various cgroup1 roots we may set up during mounting.
The linking of css to cgroups happens in code shared between cgroup1 and
cgroup2 as well. Simply remove the cgroup_on_dfl() guard.
Linkage of the root css to the root cgroup is a bit trickier: per
default, the root css of a subsystem controller belongs to the default
hierarchy (i.e. the cgroup2 root). When a controller is mounted in its
cgroup1 version, the root css is stolen and moved to the cgroup1 root;
on unmount, the css moves back to the default hierarchy. Annotate
rebind_subsystems() to move the root css linkage along between roots.
Link: https://lkml.kernel.org/r/20210209163304.77088-5-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For simplification commit 991e7673859e ("mm: memcontrol: account kernel
stack per node") changed the per zone vmalloc backed stack pages
accounting to per node.
By doing that we have lost a certain precision because those pages might
live in different NUMA nodes. In the end NR_KERNEL_STACK_KB exported to
the userspace might be over estimated on some nodes while underestimated
on others. But this is not a real world problem, just a problem found
by reading the code. So there is no actual data to showing how much
impact it has on users.
This doesn't impose any real problem to correctnes of the kernel
behavior as the counter is not used for any internal processing but it
can cause some confusion to the userspace.
Address the problem by accounting each vmalloc backing page to its own
node.
Link: https://lkml.kernel.org/r/20210303151843.81156-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit d6ad3e286d2c ("softlockup: Add sched_clock_tick() to avoid kernel
warning on kgdb resume") introduced touch_softlockup_watchdog_sync().
It solved a problem when the watchdog was touched in an atomic context,
the timer callback was proceed right after releasing interrupts, and the
local clock has not been updated yet. In this case, sched_clock_tick()
was called in watchdog_timer_fn() before updating the timer.
So far so good.
Later commit 5d1c0f4a80a6 ("watchdog: add check for suspended vm in
softlockup detector") added two kvm_check_and_clear_guest_paused()
calls. They touch the watchdog when the guest has been sleeping.
The code makes my head spin around.
Scenario 1:
+ guest did sleep:
+ PVCLOCK_GUEST_STOPPED is set
+ 1st watchdog_timer_fn() invocation:
+ the watchdog is not touched yet
+ is_softlockup() returns too big delay
+ kvm_check_and_clear_guest_paused():
+ clear PVCLOCK_GUEST_STOPPED
+ call touch_softlockup_watchdog_sync()
+ set SOFTLOCKUP_DELAY_REPORT
+ set softlockup_touch_sync
+ return from the timer callback
+ 2nd watchdog_timer_fn() invocation:
+ call sched_clock_tick() even though it is not needed.
The timer callback was invoked again only because the clock
has already been updated in the meantime.
+ call kvm_check_and_clear_guest_paused() that does nothing
because PVCLOCK_GUEST_STOPPED has been cleared already.
+ call update_report_ts() and return. This is fine. Except
that sched_clock_tick() might allow to set it already
during the 1st invocation.
Scenario 2:
+ guest did sleep
+ 1st watchdog_timer_fn() invocation
+ same as in 1st scenario
+ guest did sleep again:
+ set PVCLOCK_GUEST_STOPPED again
+ 2nd watchdog_timer_fn() invocation
+ SOFTLOCKUP_DELAY_REPORT is set from 1st invocation
+ call sched_clock_tick()
+ call kvm_check_and_clear_guest_paused()
+ clear PVCLOCK_GUEST_STOPPED
+ call touch_softlockup_watchdog_sync()
+ set SOFTLOCKUP_DELAY_REPORT
+ set softlockup_touch_sync
+ call update_report_ts() (set real timestamp immediately)
+ return from the timer callback
+ 3rd watchdog_timer_fn() invocation
+ timestamp is set from 2nd invocation
+ softlockup_touch_sync is set but not checked because
the real timestamp is already set
Make the code more straightforward:
1. Always call kvm_check_and_clear_guest_paused() at the very
beginning to handle PVCLOCK_GUEST_STOPPED. It touches the watchdog
when the quest did sleep.
2. Handle the situation when the watchdog has been touched
(SOFTLOCKUP_DELAY_REPORT is set).
Call sched_clock_tick() when touch_*sync() variant was used. It makes
sure that the timestamp will be up to date even when it has been
touched in atomic context or quest did sleep.
As a result, kvm_check_and_clear_guest_paused() is called on a single
location. And the right timestamp is always set when returning from the
timer callback.
Link: https://lkml.kernel.org/r/20210311122130.6788-7-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Any parallel softlockup reports are skipped when one CPU is already
printing backtraces from all CPUs.
The exclusive rights are synchronized using one bit in
soft_lockup_nmi_warn. There is also one memory barrier that does not make
much sense.
Use two barriers on the right location to prevent mixing two reports.
[pmladek@suse.com: use bit lock operations to prevent multiple soft-lockup reports]
Link: https://lkml.kernel.org/r/YFSVsLGVWMXTvlbk@alley
Link: https://lkml.kernel.org/r/20210311122130.6788-6-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The softlockup detector does some gymnastic with the variable
soft_watchdog_warn. It was added by the commit 58687acba59266735ad
("lockup_detector: Combine nmi_watchdog and softlockup detector").
The purpose is not completely clear. There are the following clues. They
describe the situation how it looked after the above mentioned commit:
1. The variable was checked with a comment "only warn once".
2. The variable was set when softlockup was reported. It was cleared
only when the CPU was not longer in the softlockup state.
3. watchdog_touch_ts was not explicitly updated when the softlockup
was reported. Without this variable, the report would normally
be printed again during every following watchdog_timer_fn()
invocation.
The logic has got even more tangled up by the commit ed235875e2ca98
("kernel/watchdog.c: print traces for all cpus on lockup detection").
After this commit, soft_watchdog_warn is set only when
softlockup_all_cpu_backtrace is enabled. But multiple reports from all
CPUs are prevented by a new variable soft_lockup_nmi_warn.
Conclusion:
The variable probably never worked as intended. In each case, it has not
worked last many years because the softlockup was reported repeatedly
after the full period defined by watchdog_thresh.
The reason is that watchdog gets touched in many known slow paths, for
example, in printk_stack_address(). This code is called also when
printing the softlockup report. It means that the watchdog timestamp gets
updated after each report.
Solution:
Simply remove the logic. People want the periodic report anyway.
Link: https://lkml.kernel.org/r/20210311122130.6788-5-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The softlockup detector currently shows the time spent since the last
report. As a result it is not clear whether a CPU is infinitely hogged by
a single task or if it is a repeated event.
The situation can be simulated with a simply busy loop:
while (true)
cpu_relax();
The softlockup detector produces:
[ 168.277520] watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [cat:4865]
[ 196.277604] watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [cat:4865]
[ 236.277522] watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [cat:4865]
But it should be, something like:
[ 480.372418] watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [cat:4943]
[ 508.372359] watchdog: BUG: soft lockup - CPU#2 stuck for 52s! [cat:4943]
[ 548.372359] watchdog: BUG: soft lockup - CPU#2 stuck for 89s! [cat:4943]
[ 576.372351] watchdog: BUG: soft lockup - CPU#2 stuck for 115s! [cat:4943]
For the better output, add an additional timestamp of the last report.
Only this timestamp is reset when the watchdog is intentionally touched
from slow code paths or when printing the report.
Link: https://lkml.kernel.org/r/20210311122130.6788-4-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The softlockup situation might stay for a long time or even forever. When
it happens, the softlockup debug messages are printed in regular intervals
defined by get_softlockup_thresh().
There is a mystery. The repeated message is printed after the full
interval that is defined by get_softlockup_thresh(). But the timer
callback is called more often as defined by sample_period. The code looks
like the soflockup should get reported in every sample_period when it was
once behind the thresh.
It works only by chance. The watchdog is touched when printing the stall
report, for example, in printk_stack_address().
Make the behavior clear and predictable by explicitly updating the
timestamp in watchdog_timer_fn() when the report gets printed.
Link: https://lkml.kernel.org/r/20210311122130.6788-3-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "watchdog/softlockup: Report overall time and some cleanup", v2.
I dug deep into the softlockup watchdog history when time permitted this
year. And reworked the patchset that fixed timestamps and cleaned up the
code[2].
I split it into very small steps and did even more code clean up. The
result looks quite strightforward and I am pretty confident with the
changes.
[1] v2: https://lore.kernel.org/r/20201210160038.31441-1-pmladek@suse.com
[2] v1: https://lore.kernel.org/r/20191024114928.15377-1-pmladek@suse.com
This patch (of 6):
There are many touch_*watchdog() functions. They are called in situations
where the watchdog could report false positives or create unnecessary
noise. For example, when CPU is entering idle mode, a virtual machine is
stopped, or a lot of messages are printed in the atomic context.
These functions set SOFTLOCKUP_RESET instead of a real timestamp. It
allows to call them even in a context where jiffies might be outdated.
For example, in an atomic context.
The real timestamp is set by __touch_watchdog() that is called from the
watchdog timer callback.
Rename this callback to update_touch_ts(). It better describes the effect
and clearly distinguish is from the other touch_*watchdog() functions.
Another motivation is that two timestamps are going to be used. One will
be used for the total softlockup time. The other will be used to measure
time since the last report. The new function name will help to
distinguish which timestamp is being updated.
Link: https://lkml.kernel.org/r/20210311122130.6788-1-pmladek@suse.com
Link: https://lkml.kernel.org/r/20210311122130.6788-2-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It was reported that a fix to the ring buffer recursion detection would
cause a hung machine when performing suspend / resume testing. The
following backtrace was extracted from debugging that case:
Call Trace:
trace_clock_global+0x91/0xa0
__rb_reserve_next+0x237/0x460
ring_buffer_lock_reserve+0x12a/0x3f0
trace_buffer_lock_reserve+0x10/0x50
__trace_graph_return+0x1f/0x80
trace_graph_return+0xb7/0xf0
? trace_clock_global+0x91/0xa0
ftrace_return_to_handler+0x8b/0xf0
? pv_hash+0xa0/0xa0
return_to_handler+0x15/0x30
? ftrace_graph_caller+0xa0/0xa0
? trace_clock_global+0x91/0xa0
? __rb_reserve_next+0x237/0x460
? ring_buffer_lock_reserve+0x12a/0x3f0
? trace_event_buffer_lock_reserve+0x3c/0x120
? trace_event_buffer_reserve+0x6b/0xc0
? trace_event_raw_event_device_pm_callback_start+0x125/0x2d0
? dpm_run_callback+0x3b/0xc0
? pm_ops_is_empty+0x50/0x50
? platform_get_irq_byname_optional+0x90/0x90
? trace_device_pm_callback_start+0x82/0xd0
? dpm_run_callback+0x49/0xc0
With the following RIP:
RIP: 0010:native_queued_spin_lock_slowpath+0x69/0x200
Since the fix to the recursion detection would allow a single recursion to
happen while tracing, this lead to the trace_clock_global() taking a spin
lock and then trying to take it again:
ring_buffer_lock_reserve() {
trace_clock_global() {
arch_spin_lock() {
queued_spin_lock_slowpath() {
/* lock taken */
(something else gets traced by function graph tracer)
ring_buffer_lock_reserve() {
trace_clock_global() {
arch_spin_lock() {
queued_spin_lock_slowpath() {
/* DEAD LOCK! */
Tracing should *never* block, as it can lead to strange lockups like the
above.
Restructure the trace_clock_global() code to instead of simply taking a
lock to update the recorded "prev_time" simply use it, as two events
happening on two different CPUs that calls this at the same time, really
doesn't matter which one goes first. Use a trylock to grab the lock for
updating the prev_time, and if it fails, simply try again the next time.
If it failed to be taken, that means something else is already updating
it.
Link: https://lkml.kernel.org/r/20210430121758.650b6e8a@gandalf.local.home
Cc: stable@vger.kernel.org
Tested-by: Konstantin Kharlamov <hi-angel@yandex.ru>
Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Fixes: b02414c8f045 ("ring-buffer: Fix recursion protection transitions between interrupt context") # started showing the problem
Fixes: 14131f2f98ac3 ("tracing: implement trace_clock_*() APIs") # where the bug happened
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212761
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- Change 'option defconfig' to the environment variable
KCONFIG_DEFCONFIG_LIST
- Refactor tinyconfig without using allnoconfig_y
- Remove 'option allnoconfig_y' syntax
- Change 'option modules' to 'modules'
- Do not use /boot/config-* etc. as base config for cross-compilation
- Fix a search bug in nconf
- Various code cleanups
* tag 'kconfig-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kconfig: refactor .gitignore
kconfig: highlight xconfig 'comment' lines with '***'
kconfig: highlight gconfig 'comment' lines with '***'
kconfig: gconf: remove unused code
kconfig: remove unused PACKAGE definition
kconfig: nconf: stop endless search loops
kconfig: split menu.c out of parser.y
kconfig: nconf: refactor in print_in_middle()
kconfig: nconf: remove meaningless wattrset() call from show_menu()
kconfig: nconf: change set_config_filename() to void function
kconfig: nconf: refactor attributes setup code
kconfig: nconf: remove unneeded default for menu prompt
kconfig: nconf: get rid of (void) casts from wattrset() calls
kconfig: nconf: fix NORMAL attributes
kconfig: mconf,nconf: remove unneeded '\0' termination after snprintf()
kconfig: use /boot/config-* etc. as DEFCONFIG_LIST only for native build
kconfig: change sym_change_count to a boolean flag
kconfig: nconf: fix core dump when searching in empty menu
kconfig: lxdialog: A spello fix and a punctuation added
kconfig: streamline_config.pl: Couple of typo fixes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Evaluate $(call cc-option,...) etc. only for build targets
- Add CONFIG_VMLINUX_MAP to generate .map file when linking vmlinux
- Remove unnecessary --gcc-toolchains Clang flag because the --prefix
flag finds the toolchains
- Do not pass Clang's --prefix flag when using the integrated as
- Check the assembler version in Kconfig time
- Add new CONFIG options, AS_VERSION, AS_IS_GNU, AS_IS_LLVM to clean up
some dependencies in Kconfig
- Fix invalid Module.symvers creation when building only modules
without vmlinux
- Fix false-positive modpost warnings when CONFIG_TRIM_UNUSED_KSYMS is
set, but there is no module to build
- Refactor module installation Makefile
- Support zstd for module compression
- Convert alpha and ia64 to use generic shell scripts to generate the
syscall headers
- Add a new elfnote to indicate if the kernel was built with LTO, which
will be used by pahole
- Flatten the directory structure under include/config/ so CONFIG
options and filenames match
- Change the deb source package name from linux-$(KERNELRELEASE) to
linux-upstream
* tag 'kbuild-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (42 commits)
kbuild: Add $(KBUILD_HOSTLDFLAGS) to 'has_libelf' test
kbuild: deb-pkg: change the source package name to linux-upstream
tools: do not include scripts/Kbuild.include
kbuild: redo fake deps at include/config/*.h
kbuild: remove TMPO from try-run
MAINTAINERS: add pattern for dummy-tools
kbuild: add an elfnote for whether vmlinux is built with lto
ia64: syscalls: switch to generic syscallhdr.sh
ia64: syscalls: switch to generic syscalltbl.sh
alpha: syscalls: switch to generic syscallhdr.sh
alpha: syscalls: switch to generic syscalltbl.sh
sysctl: use min() helper for namecmp()
kbuild: add support for zstd compressed modules
kbuild: remove CONFIG_MODULE_COMPRESS
kbuild: merge scripts/Makefile.modsign to scripts/Makefile.modinst
kbuild: move module strip/compression code into scripts/Makefile.modinst
kbuild: refactor scripts/Makefile.modinst
kbuild: rename extmod-prefix to extmod_prefix
kbuild: check module name conflict for external modules as well
kbuild: show the target directory for depmod log
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"
* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...
|
|
If the user already specified a swiotlb size on the command line,
swiotlb_adjust_size should not overwrite it.
Fixes: 2cbc2776efe4 ("swiotlb: remove swiotlb_nr_tbl")
Reported-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 tlb updates from Ingo Molnar:
"The x86 MM changes in this cycle were:
- Implement concurrent TLB flushes, which overlaps the local TLB
flush with the remote TLB flush.
In testing this improved sysbench performance measurably by a
couple of percentage points, especially if TLB-heavy security
mitigations are active.
- Further micro-optimizations to improve the performance of TLB
flushes"
* tag 'x86-mm-2021-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Micro-optimize smp_call_function_many_cond()
smp: Inline on_each_cpu_cond() and on_each_cpu()
x86/mm/tlb: Remove unnecessary uses of the inline keyword
cpumask: Mark functions as pure
x86/mm/tlb: Do not make is_lazy dirty for no reason
x86/mm/tlb: Privatize cpu_tlbstate
x86/mm/tlb: Flush remote and local TLBs concurrently
x86/mm/tlb: Open-code on_each_cpu_cond_mask() for tlb_is_not_lazy()
x86/mm/tlb: Unify flush_tlb_func_local() and flush_tlb_func_remote()
smp: Run functions concurrently in smp_call_function_many_cond()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
- support for limited fanotify functionality for unpriviledged users
- faster merging of fanotify events
- a few smaller fsnotify improvements
* tag 'fsnotify_for_v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
shmem: allow reporting fanotify events with file handles on tmpfs
fs: introduce a wrapper uuid_to_fsid()
fanotify_user: use upper_32_bits() to verify mask
fanotify: support limited functionality for unprivileged users
fanotify: configurable limits via sysfs
fanotify: limit number of event merge attempts
fsnotify: use hash table for faster events merge
fanotify: mix event info and pid into merge key hash
fanotify: reduce event objectid to 29-bit hash
fsnotify: allow fsnotify_{peek,remove}_first_event with empty queue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota, ext2, reiserfs updates from Jan Kara:
- support for path (instead of device) based quotactl syscall
(quotactl_path(2))
- ext2 conversion to kmap_local()
- other minor cleanups & fixes
* tag 'for_v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fs/reiserfs/journal.c: delete useless variables
fs/ext2: Replace kmap() with kmap_local_page()
ext2: Match up ext2_put_page() with ext2_dotdot() and ext2_find_entry()
fs/ext2/: fix misspellings using codespell tool
quota: report warning limits for realtime space quotas
quota: wire up quotactl_path
quota: Add mountpath based quota support
|
|
Pull io_uring updates from Jens Axboe:
- Support for multi-shot mode for POLL requests
- More efficient reference counting. This is shamelessly stolen from
the mm side. Even though referencing is mostly single/dual user, the
128 count was retained to keep the code the same. Maybe this
should/could be made generic at some point.
- Removal of the need to have a manager thread for each ring. The
manager threads only job was checking and creating new io-threads as
needed, instead we handle this from the queue path.
- Allow SQPOLL without CAP_SYS_ADMIN or CAP_SYS_NICE. Since 5.12, this
thread is "just" a regular application thread, so no need to restrict
use of it anymore.
- Cleanup of how internal async poll data lifetime is managed.
- Fix for syzbot reported crash on SQPOLL cancelation.
- Make buffer registration more like file registrations, which includes
flexibility in avoiding full set unregistration and re-registration.
- Fix for io-wq affinity setting.
- Be a bit more defensive in task->pf_io_worker setup.
- Various SQPOLL fixes.
- Cleanup of SQPOLL creds handling.
- Improvements to in-flight request tracking.
- File registration cleanups.
- Tons of cleanups and little fixes
* tag 'for-5.13/io_uring-2021-04-27' of git://git.kernel.dk/linux-block: (156 commits)
io_uring: maintain drain logic for multishot poll requests
io_uring: Check current->io_uring in io_uring_cancel_sqpoll
io_uring: fix NULL reg-buffer
io_uring: simplify SQPOLL cancellations
io_uring: fix work_exit sqpoll cancellations
io_uring: Fix uninitialized variable up.resv
io_uring: fix invalid error check after malloc
io_uring: io_sq_thread() no longer needs to reset current->pf_io_worker
kernel: always initialize task->pf_io_worker to NULL
io_uring: update sq_thread_idle after ctx deleted
io_uring: add full-fledged dynamic buffers support
io_uring: implement fixed buffers registration similar to fixed files
io_uring: prepare fixed rw for dynanic buffers
io_uring: keep table of pointers to ubufs
io_uring: add generic rsrc update with tags
io_uring: add IORING_REGISTER_RSRC
io_uring: enumerate dynamic resources
io_uring: add generic path for rsrc update
io_uring: preparation for rsrc tagging
io_uring: decouple CQE filling from requests
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Clean up SCHED_DEBUG: move the decades old mess of sysctl, procfs and
debugfs interfaces to a unified debugfs interface.
- Signals: Allow caching one sigqueue object per task, to improve
performance & latencies.
- Improve newidle_balance() irq-off latencies on systems with a large
number of CPU cgroups.
- Improve energy-aware scheduling
- Improve the PELT metrics for certain workloads
- Reintroduce select_idle_smt() to improve load-balancing locality -
but without the previous regressions
- Add 'scheduler latency debugging': warn after long periods of pending
need_resched. This is an opt-in feature that requires the enabling of
the LATENCY_WARN scheduler feature, or the use of the
resched_latency_warn_ms=xx boot parameter.
- CPU hotplug fixes for HP-rollback, and for the 'fail' interface. Fix
remaining balance_push() vs. hotplug holes/races
- PSI fixes, plus allow /proc/pressure/ files to be written by
CAP_SYS_RESOURCE tasks as well
- Fix/improve various load-balancing corner cases vs. capacity margins
- Fix sched topology on systems with NUMA diameter of 3 or above
- Fix PF_KTHREAD vs to_kthread() race
- Minor rseq optimizations
- Misc cleanups, optimizations, fixes and smaller updates
* tag 'sched-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
cpumask/hotplug: Fix cpu_dying() state tracking
kthread: Fix PF_KTHREAD vs to_kthread() race
sched/debug: Fix cgroup_path[] serialization
sched,psi: Handle potential task count underflow bugs more gracefully
sched: Warn on long periods of pending need_resched
sched/fair: Move update_nohz_stats() to the CONFIG_NO_HZ_COMMON block to simplify the code & fix an unused function warning
sched/debug: Rename the sched_debug parameter to sched_verbose
sched,fair: Alternative sched_slice()
sched: Move /proc/sched_debug to debugfs
sched,debug: Convert sysctl sched_domains to debugfs
debugfs: Implement debugfs_create_str()
sched,preempt: Move preempt_dynamic to debug.c
sched: Move SCHED_DEBUG sysctl to debugfs
sched: Don't make LATENCYTOP select SCHED_DEBUG
sched: Remove sched_schedstats sysctl out from under SCHED_DEBUG
sched/numa: Allow runtime enabling/disabling of NUMA balance without SCHED_DEBUG
sched: Use cpu_dying() to fix balance_push vs hotplug-rollback
cpumask: Introduce DYING mask
cpumask: Make cpu_{online,possible,present,active}() inline
rseq: Optimise rseq_get_rseq_cs() and clear_rseq_cs()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event updates from Ingo Molnar:
- Improve Intel uncore PMU support:
- Parse uncore 'discovery tables' - a new hardware capability
enumeration method introduced on the latest Intel platforms. This
table is in a well-defined PCI namespace location and is read via
MMIO. It is organized in an rbtree.
These uncore tables will allow the discovery of standard counter
blocks, but fancier counters still need to be enumerated
explicitly.
- Add Alder Lake support
- Improve IIO stacks to PMON mapping support on Skylake servers
- Add Intel Alder Lake PMU support - which requires the introduction of
'hybrid' CPUs and PMUs. Alder Lake is a mix of Golden Cove ('big')
and Gracemont ('small' - Atom derived) cores.
The CPU-side feature set is entirely symmetrical - but on the PMU
side there's core type dependent PMU functionality.
- Reduce data loss with CPU level hardware tracing on Intel PT / AUX
profiling, by fixing the AUX allocation watermark logic.
- Improve ring buffer allocation on NUMA systems
- Put 'struct perf_event' into their separate kmem_cache pool
- Add support for synchronous signals for select perf events. The
immediate motivation is to support low-overhead sampling-based race
detection for user-space code. The feature consists of the following
main changes:
- Add thread-only event inheritance via
perf_event_attr::inherit_thread, which limits inheritance of
events to CLONE_THREAD.
- Add the ability for events to not leak through exec(), via
perf_event_attr::remove_on_exec.
- Allow the generation of SIGTRAP via perf_event_attr::sigtrap,
extend siginfo with an u64 ::si_perf, and add the breakpoint
information to ::si_addr and ::si_perf if the event is
PERF_TYPE_BREAKPOINT.
The siginfo support is adequate for breakpoints right now - but the
new field can be used to introduce support for other types of
metadata passed over siginfo as well.
- Misc fixes, cleanups and smaller updates.
* tag 'perf-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
signal, perf: Add missing TRAP_PERF case in siginfo_layout()
signal, perf: Fix siginfo_t by avoiding u64 on 32-bit architectures
perf/x86: Allow for 8<num_fixed_counters<16
perf/x86/rapl: Add support for Intel Alder Lake
perf/x86/cstate: Add Alder Lake CPU support
perf/x86/msr: Add Alder Lake CPU support
perf/x86/intel/uncore: Add Alder Lake support
perf: Extend PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE
perf/x86/intel: Add Alder Lake Hybrid support
perf/x86: Support filter_match callback
perf/x86/intel: Add attr_update for Hybrid PMUs
perf/x86: Add structures for the attributes of Hybrid PMUs
perf/x86: Register hybrid PMUs
perf/x86: Factor out x86_pmu_show_pmu_cap
perf/x86: Remove temporary pmu assignment in event_init
perf/x86/intel: Factor out intel_pmu_check_extra_regs
perf/x86/intel: Factor out intel_pmu_check_event_constraints
perf/x86/intel: Factor out intel_pmu_check_num_counters
perf/x86: Hybrid PMU support for extra_regs
perf/x86: Hybrid PMU support for event constraints
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- rtmutex cleanup & spring cleaning pass that removes ~400 lines of
code
- Futex simplifications & cleanups
- Add debugging to the CSD code, to help track down a tenacious race
(or hw problem)
- Add lockdep_assert_not_held(), to allow code to require a lock to not
be held, and propagate this into the ath10k driver
- Misc LKMM documentation updates
- Misc KCSAN updates: cleanups & documentation updates
- Misc fixes and cleanups
- Fix locktorture bugs with ww_mutexes
* tag 'locking-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
kcsan: Fix printk format string
static_call: Relax static_call_update() function argument type
static_call: Fix unused variable warn w/o MODULE
locking/rtmutex: Clean up signal handling in __rt_mutex_slowlock()
locking/rtmutex: Restrict the trylock WARN_ON() to debug
locking/rtmutex: Fix misleading comment in rt_mutex_postunlock()
locking/rtmutex: Consolidate the fast/slowpath invocation
locking/rtmutex: Make text section and inlining consistent
locking/rtmutex: Move debug functions as inlines into common header
locking/rtmutex: Decrapify __rt_mutex_init()
locking/rtmutex: Remove pointless CONFIG_RT_MUTEXES=n stubs
locking/rtmutex: Inline chainwalk depth check
locking/rtmutex: Move rt_mutex_debug_task_free() to rtmutex.c
locking/rtmutex: Remove empty and unused debug stubs
locking/rtmutex: Consolidate rt_mutex_init()
locking/rtmutex: Remove output from deadlock detector
locking/rtmutex: Remove rtmutex deadlock tester leftovers
locking/rtmutex: Remove rt_mutex_timed_lock()
MAINTAINERS: Add myself as futex reviewer
locking/mutex: Remove repeated declaration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
- Support for "N" as alias for last bit in bitmap parsing library (eg
using syntax like "nohz_full=2-N")
- kvfree_rcu updates
- mm_dump_obj() updates. (One of these is to mm, but was suggested by
Andrew Morton.)
- RCU callback offloading update
- Polling RCU grace-period interfaces
- Realtime-related RCU updates
- Tasks-RCU updates
- Torture-test updates
- Torture-test scripting updates
- Miscellaneous fixes
* tag 'core-rcu-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
rcutorture: Test start_poll_synchronize_rcu() and poll_state_synchronize_rcu()
rcu: Provide polling interfaces for Tiny RCU grace periods
torture: Fix kvm.sh --datestamp regex check
torture: Consolidate qemu-cmd duration editing into kvm-transform.sh
torture: Print proper vmlinux path for kvm-again.sh runs
torture: Make TORTURE_TRUST_MAKE available in kvm-again.sh environment
torture: Make kvm-transform.sh update jitter commands
torture: Add --duration argument to kvm-again.sh
torture: Add kvm-again.sh to rerun a previous torture-test
torture: Create a "batches" file for build reuse
torture: De-capitalize TORTURE_SUITE
torture: Make upper-case-only no-dot no-slash scenario names official
torture: Rename SRCU-t and SRCU-u to avoid lowercase characters
torture: Remove no-mpstat error message
torture: Record kvm-test-1-run.sh and kvm-test-1-run-qemu.sh PIDs
torture: Record jitter start/stop commands
torture: Extract kvm-test-1-run-qemu.sh from kvm-test-1-run.sh
torture: Record TORTURE_KCONFIG_GDB_ARG in qemu-cmd
torture: Abstract jitter.sh start/stop into scripts
rcu: Provide polling interfaces for Tree RCU grace periods
...
|
|
The default max PID is set by PID_MAX_DEFAULT, and the tracing
infrastructure uses this number to map PIDs to the comm names of the
tasks, such output of the trace can show names from the recorded PIDs in
the ring buffer. This mapping is also exported to user space via the
"saved_cmdlines" file in the tracefs directory.
But currently the mapping expects the PIDs to be less than
PID_MAX_DEFAULT, which is the default maximum and not the real maximum.
Recently, systemd will increases the maximum value of a PID on the system,
and when tasks are traced that have a PID higher than PID_MAX_DEFAULT, its
comm is not recorded. This leads to the entire trace to have "<...>" as
the comm name, which is pretty useless.
Instead, keep the array mapping the size of PID_MAX_DEFAULT, but instead
of just mapping the index to the comm, map a mask of the PID
(PID_MAX_DEFAULT - 1) to the comm, and find the full PID from the
map_cmdline_to_pid array (that already exists).
This bug goes back to the beginning of ftrace, but hasn't been an issue
until user space started increasing the maximum value of PIDs.
Link: https://lkml.kernel.org/r/20210427113207.3c601884@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: bc0c38d139ec7 ("ftrace: latency tracer infrastructure")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup changes from Tejun Heo:
"The only notable change is Vipin's new misc cgroup controller.
This implements generic support for resources which can be controlled
by simply counting and limiting the number of resource instances - ie
there's X number of these on the system and this cgroup subtree can
have upto Y of those.
The first user is the address space IDs used for virtual machine
memory encryption and expected future usages are similar - niche
hardware features with concrete resource limits and simple usage
models"
* 'for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: use tsk->in_iowait instead of delayacct_is_task_waiting_on_io()
cgroup/cpuset: fix typos in comments
cgroup: misc: mark dummy misc_cg_res_total_usage() static inline
svm/sev: Register SEV and SEV-ES ASIDs to the misc controller
cgroup: Miscellaneous cgroup documentation.
cgroup: Add misc cgroup controller
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching update from Petr Mladek:
- Use TIF_NOTIFY_SIGNAL infrastructure instead of the fake signal
* tag 'livepatching-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Replace the fake signal sending with TIF_NOTIFY_SIGNAL infrastructure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Stop synchronizing kernel log buffer readers by logbuf_lock. As a
result, the access to the buffer is fully lockless now.
Note that printk() itself still uses locks because it tries to flush
the messages to the console immediately. Also the per-CPU temporary
buffers are still there because they prevent infinite recursion and
serialize backtraces from NMI. All this is going to change in the
future.
- kmsg_dump API rework and cleanup as a side effect of the logbuf_lock
removal.
- Make bstr_printf() aware that %pf and %pF formats could deference the
given pointer.
- Show also page flags by %pGp format.
- Clarify the documentation for plain pointer printing.
- Do not show no_hash_pointers warning multiple times.
- Update Senozhatsky email address.
- Some clean up.
* tag 'printk-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (24 commits)
lib/vsprintf.c: remove leftover 'f' and 'F' cases from bstr_printf()
printk: clarify the documentation for plain pointer printing
kernel/printk.c: Fixed mundane typos
printk: rename vprintk_func to vprintk
vsprintf: dump full information of page flags in pGp
mm, slub: don't combine pr_err with INFO
mm, slub: use pGp to print page flags
MAINTAINERS: update Senozhatsky email address
lib/vsprintf: do not show no_hash_pointers message multiple times
printk: console: remove unnecessary safe buffer usage
printk: kmsg_dump: remove _nolock() variants
printk: remove logbuf_lock
printk: introduce a kmsg_dump iterator
printk: kmsg_dumper: remove @active field
printk: add syslog_lock
printk: use atomic64_t for devkmsg_user.seq
printk: use seqcount_latch for clear_seq
printk: introduce CONSOLE_LOG_MAX
printk: consolidate kmsg_dump_get_buffer/syslog_print_all code
printk: refactor kmsg_dump_get_buffer()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"Exclusively tidy ups this cycle. Most of them are thanks to Sumit Garg
and, as it happens, the clean ups do result in a slight increase in
the line count. This is due to registering kdb commands using data
structures rather than function calls which, in turn, simplifies the
memory management during command registration.
In addition to changes to command registration we also have some dead
code removal, a clearer implementation of environment variable
handling and a typo fix"
* tag 'kgdb-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kdb: Refactor env variables get/set code
kernel: debug: Ordinary typo fixes in the file gdbstub.c
kdb: Simplify kdb commands registration
kdb: Remove redundant function definitions/prototypes
|
|
Uses the already in-place infrastructure provided by the
'generic_map_*_batch' functions.
No tweak was needed as it transparently handles the percpu variant.
As arrays don't have delete operations, let it return a error to
user space (default behaviour).
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210424214510.806627-2-pctammela@mojatatu.com
|
|
BPF has three formatted output helpers: bpf_trace_printk, bpf_seq_printf
and bpf_snprintf. Their signatures specify that all arguments are
provided from the BPF world as u64s (in an array or as registers). All
of these helpers are currently implemented by calling functions such as
snprintf() whose signatures take a variable number of arguments, then
placed in a va_list by the compiler to call vsnprintf().
"d9c9e4db bpf: Factorize bpf_trace_printk and bpf_seq_printf" introduced
a bpf_printf_prepare function that fills an array of u64 sanitized
arguments with an array of "modifiers" which indicate what the "real"
size of each argument should be (given by the format specifier). The
BPF_CAST_FMT_ARG macro consumes these arrays and casts each argument to
its real size. However, the C promotion rules implicitely cast them all
back to u64s. Therefore, the arguments given to snprintf are u64s and
the va_list constructed by the compiler will use 64 bits for each
argument. On 64 bit machines, this happens to work well because 32 bit
arguments in va_lists need to occupy 64 bits anyway, but on 32 bit
architectures this breaks the layout of the va_list expected by the
called function and mangles values.
In "88a5c690b6 bpf: fix bpf_trace_printk on 32 bit archs", this problem
had been solved for bpf_trace_printk only with a "horrid workaround"
that emitted multiple calls to trace_printk where each call had
different argument types and generated different va_list layouts. One of
the call would be dynamically chosen at runtime. This was ok with the 3
arguments that bpf_trace_printk takes but bpf_seq_printf and
bpf_snprintf accept up to 12 arguments. Because this approach scales
code exponentially, it is not a viable option anymore.
Because the promotion rules are part of the language and because the
construction of a va_list is an arch-specific ABI, it's best to just
avoid variadic arguments and va_lists altogether. Thankfully the
kernel's snprintf() has an alternative in the form of bstr_printf() that
accepts arguments in a "binary buffer representation". These binary
buffers are currently created by vbin_printf and used in the tracing
subsystem to split the cost of printing into two parts: a fast one that
only dereferences and remembers values, and a slower one, called later,
that does the pretty-printing.
This patch refactors bpf_printf_prepare to construct binary buffers of
arguments consumable by bstr_printf() instead of arrays of arguments and
modifiers. This gets rid of BPF_CAST_FMT_ARG and greatly simplifies the
bpf_printf_prepare usage but there are a few gotchas that change how
bpf_printf_prepare needs to do things.
Currently, bpf_printf_prepare uses a per cpu temporary buffer as a
generic storage for strings and IP addresses. With this refactoring, the
temporary buffers now holds all the arguments in a structured binary
format.
To comply with the format expected by bstr_printf, certain format
specifiers also need to be pre-formatted: %pB and %pi6/%pi4/%pI4/%pI6.
Because vsnprintf subroutines for these specifiers are hard to expose,
we pre-format these arguments with calls to snprintf().
Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210427174313.860948-3-revest@chromium.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Another small pull request for audit, most of the patches are
documentation updates with only two real code changes: one to fix a
compiler warning for a dummy function/macro, and one to cleanup some
code since we removed the AUDIT_FILTER_ENTRY ages ago (v4.17)"
* tag 'audit-pr-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: drop /proc/PID/loginuid documentation Format field
audit: avoid -Wempty-body warning
audit: document /proc/PID/sessionid
audit: document /proc/PID/loginuid
MAINTAINERS: update audit files
audit: further cleanup of AUDIT_FILTER_ENTRY deprecation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Add support for measuring the SELinux state and policy capabilities
using IMA.
- A handful of SELinux/NFS patches to compare the SELinux state of one
mount with a set of mount options. Olga goes into more detail in the
patch descriptions, but this is important as it allows more
flexibility when using NFS and SELinux context mounts.
- Properly differentiate between the subjective and objective LSM
credentials; including support for the SELinux and Smack. My clumsy
attempt at a proper fix for AppArmor didn't quite pass muster so John
is working on a proper AppArmor patch, in the meantime this set of
patches shouldn't change the behavior of AppArmor in any way. This
change explains the bulk of the diffstat beyond security/.
- Fix a problem where we were not properly terminating the permission
list for two SELinux object classes.
* tag 'selinux-pr-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: add proper NULL termination to the secclass_map permissions
smack: differentiate between subjective and objective task credentials
selinux: clarify task subjective and objective credentials
lsm: separate security_task_getsecid() into subjective and objective variants
nfs: account for selinux security context when deciding to share superblock
nfs: remove unneeded null check in nfs_fill_super()
lsm,selinux: add new hook to compare new mount to an existing mount
selinux: fix misspellings using codespell tool
selinux: fix misspellings using codespell tool
selinux: measure state and policy capabilities
selinux: Allow context mounts for unpriviliged overlayfs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull CFI on arm64 support from Kees Cook:
"This builds on last cycle's LTO work, and allows the arm64 kernels to
be built with Clang's Control Flow Integrity feature. This feature has
happily lived in Android kernels for almost 3 years[1], so I'm excited
to have it ready for upstream.
The wide diffstat is mainly due to the treewide fixing of mismatched
list_sort prototypes. Other things in core kernel are to address
various CFI corner cases. The largest code portion is the CFI runtime
implementation itself (which will be shared by all architectures
implementing support for CFI). The arm64 pieces are Acked by arm64
maintainers rather than coming through the arm64 tree since carrying
this tree over there was going to be awkward.
CFI support for x86 is still under development, but is pretty close.
There are a handful of corner cases on x86 that need some improvements
to Clang and objtool, but otherwise works well.
Summary:
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)"
* tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
arm64: allow CONFIG_CFI_CLANG to be selected
KVM: arm64: Disable CFI for nVHE
arm64: ftrace: use function_nocfi for ftrace_call
arm64: add __nocfi to __apply_alternatives
arm64: add __nocfi to functions that jump to a physical address
arm64: use function_nocfi with __pa_symbol
arm64: implement function_nocfi
psci: use function_nocfi for cpu_resume
lkdtm: use function_nocfi
treewide: Change list_sort to use const pointers
bpf: disable CFI in dispatcher functions
kallsyms: strip ThinLTO hashes from static functions
kthread: use WARN_ON_FUNCTION_MISMATCH
workqueue: use WARN_ON_FUNCTION_MISMATCH
module: ensure __cfi_check alignment
mm: add generic function_nocfi macro
cfi: add __cficanonical
add support for Clang CFI
|
|
Fix the type of index from unsigned int to int since find_slots() might
return -1.
Fixes: 26a7e094783d ("swiotlb: refactor swiotlb_tbl_map_single")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Claire Chang <tientzu@chromium.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
- Fix "cacheable" typo in comments (Cui GaoSheng)
- Fix CONFIG for /proc/$pid/status Seccomp_filters (Kenta.Tada@sony.com)
* tag 'seccomp-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: Fix "cacheable" typo in comments
seccomp: Fix CONFIG tests for Seccomp_filters
|
|
Rely on netif_receive_skb_list routine to send skbs converted from
xdp_frames in cpu_map_kthread_run in order to improve i-cache usage.
The proposed patch has been tested running xdp_redirect_cpu bpf sample
available in the kernel tree that is used to redirect UDP frames from
ixgbe driver to a cpumap entry and then to the networking stack. UDP
frames are generated using pktgen. Packets are discarded by the UDP
layer.
$ xdp_redirect_cpu --cpu <cpu> --progname xdp_cpu_map0 --dev <eth>
bpf-next: ~2.35Mpps
bpf-next + cpumap skb-list: ~2.72Mpps
Rename drops counter in kmem_alloc_drops since now it reports just
kmem_cache_alloc_bulk failures
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/c729f83e5d7482d9329e0f165bdbe5adcefd1510.1619169700.git.lorenzo@kernel.org
|
|
Similarly as b02709587ea3 ("bpf: Fix propagation of 32-bit signed bounds
from 64-bit bounds."), we also need to fix the propagation of 32 bit
unsigned bounds from 64 bit counterparts. That is, really only set the
u32_{min,max}_value when /both/ {umin,umax}_value safely fit in 32 bit
space. For example, the register with a umin_value == 1 does /not/ imply
that u32_min_value is also equal to 1, since umax_value could be much
larger than 32 bit subregister can hold, and thus u32_min_value is in
the interval [0,1] instead.
Before fix, invalid tracking result of R2_w=inv1:
[...]
5: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0) R10=fp0
5: (35) if r2 >= 0x1 goto pc+1
[...] // goto path
7: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,umin_value=1) R10=fp0
7: (b6) if w2 <= 0x1 goto pc+1
[...] // goto path
9: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,smin_value=-9223372036854775807,smax_value=9223372032559808513,umin_value=1,umax_value=18446744069414584321,var_off=(0x1; 0xffffffff00000000),s32_min_value=1,s32_max_value=1,u32_max_value=1) R10=fp0
9: (bc) w2 = w2
10: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv1 R10=fp0
[...]
After fix, correct tracking result of R2_w=inv(id=0,umax_value=1,var_off=(0x0; 0x1)):
[...]
5: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0) R10=fp0
5: (35) if r2 >= 0x1 goto pc+1
[...] // goto path
7: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,umin_value=1) R10=fp0
7: (b6) if w2 <= 0x1 goto pc+1
[...] // goto path
9: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,smax_value=9223372032559808513,umax_value=18446744069414584321,var_off=(0x0; 0xffffffff00000001),s32_min_value=0,s32_max_value=1,u32_max_value=1) R10=fp0
9: (bc) w2 = w2
10: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0,umax_value=1,var_off=(0x0; 0x1)) R10=fp0
[...]
Thus, same issue as in b02709587ea3 holds for unsigned subregister tracking.
Also, align __reg64_bound_u32() similarly to __reg64_bound_s32() as done in
b02709587ea3 to make them uniform again.
Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: Manfred Paul (@_manfp)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
bpf_trace_printk uses a shared static buffer to hold strings before they
are printed. A recent refactoring moved the locking of that buffer after
it gets filled by mistake.
Fixes: d9c9e4db186a ("bpf: Factorize bpf_trace_printk and bpf_seq_printf")
Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210427112958.773132-1-revest@chromium.org
|
