summaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)AuthorFilesLines
2020-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller17-88/+122
Simple overlapping changes to linux/vermagic.h Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-25Merge branch 'for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull pid leak fix from Eric Biederman: "Oleg noticed that put_pid(thread_pid) was not getting called when proc was not compiled in. Let's get that fixed before 5.7 is released and causes problems for anyone" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: proc: Put thread_pid in release_task not proc_flush_pid
2020-04-25Merge tag 'sched-urgent-2020-04-25' of ↵Linus Torvalds1-7/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Misc fixes: - an uclamp accounting fix - three frequency invariance fixes and a readability improvement" * tag 'sched-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Fix reset-on-fork from RT with uclamp x86, sched: Move check for CPU type to caller function x86, sched: Don't enable static key when starting secondary CPUs x86, sched: Account for CPUs with less than 4 cores in freq. invariance x86, sched: Bail out of frequency invariance if base frequency is unknown
2020-04-25Merge tag 'perf-urgent-2020-04-25' of ↵Linus Torvalds1-3/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Two changes: - fix exit event records - extend x86 PMU driver enumeration to add Intel Jasper Lake CPU support" * tag 'perf-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: fix parent pid/tid in task exit events perf/x86/cstate: Add Jasper Lake CPU support
2020-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds3-14/+39
Pull networking fixes from David Miller: 1) Fix memory leak in netfilter flowtable, from Roi Dayan. 2) Ref-count leaks in netrom and tipc, from Xiyu Yang. 3) Fix warning when mptcp socket is never accepted before close, from Florian Westphal. 4) Missed locking in ovs_ct_exit(), from Tonghao Zhang. 5) Fix large delays during PTP synchornization in cxgb4, from Rahul Lakkireddy. 6) team_mode_get() can hang, from Taehee Yoo. 7) Need to use kvzalloc() when allocating fw tracer in mlx5 driver, from Niklas Schnelle. 8) Fix handling of bpf XADD on BTF memory, from Jann Horn. 9) Fix BPF_STX/BPF_B encoding in x86 bpf jit, from Luke Nelson. 10) Missing queue memory release in iwlwifi pcie code, from Johannes Berg. 11) Fix NULL deref in macvlan device event, from Taehee Yoo. 12) Initialize lan87xx phy correctly, from Yuiko Oshino. 13) Fix looping between VRF and XFRM lookups, from David Ahern. 14) etf packet scheduler assumes all sockets are full sockets, which is not necessarily true. From Eric Dumazet. 15) Fix mptcp data_fin handling in RX path, from Paolo Abeni. 16) fib_select_default() needs to handle nexthop objects, from David Ahern. 17) Use GFP_ATOMIC under spinlock in mac80211_hwsim, from Wei Yongjun. 18) vxlan and geneve use wrong nlattr array, from Sabrina Dubroca. 19) Correct rx/tx stats in bcmgenet driver, from Doug Berger. 20) BPF_LDX zero-extension is encoded improperly in x86_32 bpf jit, fix from Luke Nelson. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (100 commits) selftests/bpf: Fix a couple of broken test_btf cases tools/runqslower: Ensure own vmlinux.h is picked up first bpf: Make bpf_link_fops static bpftool: Respect the -d option in struct_ops cmd selftests/bpf: Add test for freplace program with expected_attach_type bpf: Propagate expected_attach_type when verifying freplace programs bpf: Fix leak in LINK_UPDATE and enforce empty old_prog_fd bpf, x86_32: Fix logic error in BPF_LDX zero-extension bpf, x86_32: Fix clobbering of dst for BPF_JSET bpf, x86_32: Fix incorrect encoding in BPF_LDX zero-extension bpf: Fix reStructuredText markup net: systemport: suppress warnings on failed Rx SKB allocations net: bcmgenet: suppress warnings on failed Rx SKB allocations macsec: avoid to set wrong mtu mac80211: sta_info: Add lockdep condition for RCU list usage mac80211: populate debugfs only after cfg80211 init net: bcmgenet: correct per TX/RX ring statistics net: meth: remove spurious copyright text net: phy: bcm84881: clear settings on link down chcr: Fix CPU hard lockup ...
2020-04-25bpf: Make bpf_link_fops staticZou Wei1-1/+1
Fix the following sparse warning: kernel/bpf/syscall.c:2289:30: warning: symbol 'bpf_link_fops' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/1587609160-117806-1-git-send-email-zou_wei@huawei.com
2020-04-25bpf: Propagate expected_attach_type when verifying freplace programsToke Høiland-Jørgensen1-0/+8
For some program types, the verifier relies on the expected_attach_type of the program being verified in the verification process. However, for freplace programs, the attach type was not propagated along with the verifier ops, so the expected_attach_type would always be zero for freplace programs. This in turn caused the verifier to sometimes make the wrong call for freplace programs. For all existing uses of expected_attach_type for this purpose, the result of this was only false negatives (i.e., freplace functions would be rejected by the verifier even though they were valid programs for the target they were replacing). However, should a false positive be introduced, this can lead to out-of-bounds accesses and/or crashes. The fix introduced in this patch is to propagate the expected_attach_type to the freplace program during verification, and reset it after that is done. Fixes: be8704ff07d2 ("bpf: Introduce dynamic program extensions") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/158773526726.293902.13257293296560360508.stgit@toke.dk
2020-04-25bpf: Fix leak in LINK_UPDATE and enforce empty old_prog_fdAndrii Nakryiko1-2/+9
Fix bug of not putting bpf_link in LINK_UPDATE command. Also enforce zeroed old_prog_fd if no BPF_F_REPLACE flag is specified. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200424052045.4002963-1-andriin@fb.com
2020-04-24proc: Put thread_pid in release_task not proc_flush_pidEric W. Biederman1-0/+1
Oleg pointed out that in the unlikely event the kernel is compiled with CONFIG_PROC_FS unset that release_task will now leak the pid. Move the put_pid out of proc_flush_pid into release_task to fix this and to guarantee I don't make that mistake again. When possible it makes sense to keep get and put in the same function so it can easily been seen how they pair up. Fixes: 7bc3e6e55acf ("proc: Use a list of inodes to flush from proc") Reported-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-04-24Merge tag 'trace-v5.7-rc2' of ↵Linus Torvalds3-3/+11
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "A few tracing fixes: - Two fixes for memory leaks detected by kmemleak - Removal of some dead code - A few local functions turned static" * tag 'trace-v5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Convert local functions in tracing_map.c to static tracing: Remove DECLARE_TRACE_NOARGS ftrace: Fix memory leak caused by not freeing entry in unregister_ftrace_direct() tracing: Fix memory leaks in trace_events_hist.c
2020-04-23Merge branch 'for-linus' of ↵Linus Torvalds1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull SIGCHLD fix from Eric Biederman: "Christof Meerwald reported that do_notify_parent has not been successfully populating si_pid and si_uid for multi-threaded processes. This is the one-liner fix. Strictly speaking a one-liner plus comment" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal: Avoid corrupting si_pid and si_uid in do_notify_parent
2020-04-23xdp: export the DEV_MAP_BULK_SIZE macroIoana Ciornei1-1/+0
Export the DEV_MAP_BULK_SIZE macro to the header file so that drivers can directly use it as the maximum number of xdp_frames received in the .ndo_xdp_xmit() callback. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23tracing: Convert local functions in tracing_map.c to staticJason Yan1-3/+3
Fix the following sparse warning: kernel/trace/tracing_map.c:286:6: warning: symbol 'tracing_map_array_clear' was not declared. Should it be static? kernel/trace/tracing_map.c:297:6: warning: symbol 'tracing_map_array_free' was not declared. Should it be static? kernel/trace/tracing_map.c:319:26: warning: symbol 'tracing_map_array_alloc' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20200410073312.38855-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-04-23ftrace: Fix memory leak caused by not freeing entry in ↵Steven Rostedt (VMware)1-0/+1
unregister_ftrace_direct() kmemleak reported the following: unreferenced object 0xffff90d47127a920 (size 32): comm "modprobe", pid 1766, jiffies 4294792031 (age 162.568s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 22 01 00 00 00 00 ad de ........"....... 00 78 12 a7 ff ff ff ff 00 00 b6 c0 ff ff ff ff .x.............. backtrace: [<00000000bb79e72e>] register_ftrace_direct+0xcb/0x3a0 [<00000000295e4f79>] do_one_initcall+0x72/0x340 [<00000000873ead18>] do_init_module+0x5a/0x220 [<00000000974d9de5>] load_module+0x2235/0x2550 [<0000000059c3d6ce>] __do_sys_finit_module+0xc0/0x120 [<000000005a8611b4>] do_syscall_64+0x60/0x230 [<00000000a0cdc49e>] entry_SYSCALL_64_after_hwframe+0x49/0xb3 The entry used to save the direct descriptor needs to be freed when unregistering. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-04-23tracing: Fix memory leaks in trace_events_hist.cVamshi K Sthambamkadi1-0/+7
kmemleak report 1: [<9092c50b>] kmem_cache_alloc_trace+0x138/0x270 [<05a2c9ed>] create_field_var+0xcf/0x180 [<528a2d68>] action_create+0xe2/0xc80 [<63f50b61>] event_hist_trigger_func+0x15b5/0x1920 [<28ea5d3d>] trigger_process_regex+0x7b/0xc0 [<3138e86f>] event_trigger_write+0x4d/0xb0 [<ffd66c19>] __vfs_write+0x30/0x200 [<4f424a0d>] vfs_write+0x96/0x1b0 [<da59a290>] ksys_write+0x53/0xc0 [<3717101a>] __ia32_sys_write+0x15/0x20 [<c5f23497>] do_fast_syscall_32+0x70/0x250 [<46e2629c>] entry_SYSENTER_32+0xaf/0x102 This is because save_vars[] of struct hist_trigger_data are not destroyed kmemleak report 2: [<9092c50b>] kmem_cache_alloc_trace+0x138/0x270 [<6e5e97c5>] create_var+0x3c/0x110 [<de82f1b9>] create_field_var+0xaf/0x180 [<528a2d68>] action_create+0xe2/0xc80 [<63f50b61>] event_hist_trigger_func+0x15b5/0x1920 [<28ea5d3d>] trigger_process_regex+0x7b/0xc0 [<3138e86f>] event_trigger_write+0x4d/0xb0 [<ffd66c19>] __vfs_write+0x30/0x200 [<4f424a0d>] vfs_write+0x96/0x1b0 [<da59a290>] ksys_write+0x53/0xc0 [<3717101a>] __ia32_sys_write+0x15/0x20 [<c5f23497>] do_fast_syscall_32+0x70/0x250 [<46e2629c>] entry_SYSENTER_32+0xaf/0x102 struct hist_field allocated through create_var() do not initialize "ref" field to 1. The code in __destroy_hist_field() does not destroy object if "ref" is initialized to zero, the condition if (--hist_field->ref > 1) always passes since unsigned int wraps. kmemleak report 3: [<f8666fcc>] __kmalloc_track_caller+0x139/0x2b0 [<bb7f80a5>] kstrdup+0x27/0x50 [<39d70006>] init_var_ref+0x58/0xd0 [<8ca76370>] create_var_ref+0x89/0xe0 [<f045fc39>] action_create+0x38f/0xc80 [<7c146821>] event_hist_trigger_func+0x15b5/0x1920 [<07de3f61>] trigger_process_regex+0x7b/0xc0 [<e87daf8f>] event_trigger_write+0x4d/0xb0 [<19bf1512>] __vfs_write+0x30/0x200 [<64ce4d27>] vfs_write+0x96/0x1b0 [<a6f34170>] ksys_write+0x53/0xc0 [<7d4230cd>] __ia32_sys_write+0x15/0x20 [<8eadca00>] do_fast_syscall_32+0x70/0x250 [<235cf985>] entry_SYSENTER_32+0xaf/0x102 hist_fields (system & event_name) are not freed Link: http://lkml.kernel.org/r/20200422061503.GA5151@cosmos Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-04-23perf/core: fix parent pid/tid in task exit eventsIan Rogers1-3/+10
Current logic yields the child task as the parent. Before: $ perf record bash -c "perf list > /dev/null" $ perf script -D |grep 'FORK\|EXIT' 4387036190981094 0x5a70 [0x30]: PERF_RECORD_FORK(10472:10472):(10470:10470) 4387036606207580 0xf050 [0x30]: PERF_RECORD_EXIT(10472:10472):(10472:10472) 4387036607103839 0x17150 [0x30]: PERF_RECORD_EXIT(10470:10470):(10470:10470) ^ Note the repeated values here -------------------/ After: 383281514043 0x9d8 [0x30]: PERF_RECORD_FORK(2268:2268):(2266:2266) 383442003996 0x2180 [0x30]: PERF_RECORD_EXIT(2268:2268):(2266:2266) 383451297778 0xb70 [0x30]: PERF_RECORD_EXIT(2266:2266):(2265:2265) Fixes: 94d5d1b2d891 ("perf_counter: Report the cloning task as parent on perf_counter_fork()") Reported-by: KP Singh <kpsingh@google.com> Signed-off-by: Ian Rogers <irogers@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200417182842.12522-1-irogers@google.com
2020-04-23sched/core: Fix reset-on-fork from RT with uclampQuentin Perret1-7/+2
uclamp_fork() resets the uclamp values to their default when the reset-on-fork flag is set. It also checks whether the task has a RT policy, and sets its uclamp.min to 1024 accordingly. However, during reset-on-fork, the task's policy is lowered to SCHED_NORMAL right after, hence leading to an erroneous uclamp.min setting for the new task if it was forked from RT. Fix this by removing the unnecessary check on rt_task() in uclamp_fork() as this doesn't make sense if the reset-on-fork flag is set. Fixes: 1a00d999971c ("sched/uclamp: Set default clamps for RT tasks") Reported-by: Chitti Babu Theegala <ctheegal@codeaurora.org> Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Patrick Bellasi <patrick.bellasi@matbug.net> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Link: https://lkml.kernel.org/r/20200416085956.217587-1-qperret@google.com
2020-04-21kernel/module: Hide vermagic header file from general useLeon Romanovsky1-0/+3
VERMAGIC* definitions are not supposed to be used by the drivers, see this [1] bug report, so introduce special define to guard inclusion of this header file and define it in kernel/modules.h and in internal script that generates *.mod.c files. In-tree module build: ➜ kernel git:(vermagic) ✗ make clean ➜ kernel git:(vermagic) ✗ make M=drivers/infiniband/hw/mlx5 ➜ kernel git:(vermagic) ✗ modinfo drivers/infiniband/hw/mlx5/mlx5_ib.ko filename: /images/leonro/src/kernel/drivers/infiniband/hw/mlx5/mlx5_ib.ko <...> vermagic: 5.6.0+ SMP mod_unload modversions Out-of-tree module build: ➜ mlx5 make -C /images/leonro/src/kernel clean M=/tmp/mlx5 ➜ mlx5 make -C /images/leonro/src/kernel M=/tmp/mlx5 ➜ mlx5 modinfo /tmp/mlx5/mlx5_ib.ko filename: /tmp/mlx5/mlx5_ib.ko <...> vermagic: 5.6.0+ SMP mod_unload modversions [1] https://lore.kernel.org/lkml/20200411155623.GA22175@zn.tnic Reported-by: Borislav Petkov <bp@suse.de> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Jessica Yu <jeyu@kernel.org> Co-developed-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-21signal: Avoid corrupting si_pid and si_uid in do_notify_parentEric W. Biederman1-1/+5
Christof Meerwald <cmeerw@cmeerw.org> writes: > Hi, > > this is probably related to commit > 7a0cf094944e2540758b7f957eb6846d5126f535 (signal: Correct namespace > fixups of si_pid and si_uid). > > With a 5.6.5 kernel I am seeing SIGCHLD signals that don't include a > properly set si_pid field - this seems to happen for multi-threaded > child processes. > > A simple test program (based on the sample from the signalfd man page): > > #include <sys/signalfd.h> > #include <signal.h> > #include <unistd.h> > #include <spawn.h> > #include <stdlib.h> > #include <stdio.h> > > #define handle_error(msg) \ > do { perror(msg); exit(EXIT_FAILURE); } while (0) > > int main(int argc, char *argv[]) > { > sigset_t mask; > int sfd; > struct signalfd_siginfo fdsi; > ssize_t s; > > sigemptyset(&mask); > sigaddset(&mask, SIGCHLD); > > if (sigprocmask(SIG_BLOCK, &mask, NULL) == -1) > handle_error("sigprocmask"); > > pid_t chldpid; > char *chldargv[] = { "./sfdclient", NULL }; > posix_spawn(&chldpid, "./sfdclient", NULL, NULL, chldargv, NULL); > > sfd = signalfd(-1, &mask, 0); > if (sfd == -1) > handle_error("signalfd"); > > for (;;) { > s = read(sfd, &fdsi, sizeof(struct signalfd_siginfo)); > if (s != sizeof(struct signalfd_siginfo)) > handle_error("read"); > > if (fdsi.ssi_signo == SIGCHLD) { > printf("Got SIGCHLD %d %d %d %d\n", > fdsi.ssi_status, fdsi.ssi_code, > fdsi.ssi_uid, fdsi.ssi_pid); > return 0; > } else { > printf("Read unexpected signal\n"); > } > } > } > > > and a multi-threaded client to test with: > > #include <unistd.h> > #include <pthread.h> > > void *f(void *arg) > { > sleep(100); > } > > int main() > { > pthread_t t[8]; > > for (int i = 0; i != 8; ++i) > { > pthread_create(&t[i], NULL, f, NULL); > } > } > > I tried to do a bit of debugging and what seems to be happening is > that > > /* From an ancestor pid namespace? */ > if (!task_pid_nr_ns(current, task_active_pid_ns(t))) { > > fails inside task_pid_nr_ns because the check for "pid_alive" fails. > > This code seems to be called from do_notify_parent and there we > actually have "tsk != current" (I am assuming both are threads of the > current process?) I instrumented the code with a warning and received the following backtrace: > WARNING: CPU: 0 PID: 777 at kernel/pid.c:501 __task_pid_nr_ns.cold.6+0xc/0x15 > Modules linked in: > CPU: 0 PID: 777 Comm: sfdclient Not tainted 5.7.0-rc1userns+ #2924 > Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 > RIP: 0010:__task_pid_nr_ns.cold.6+0xc/0x15 > Code: ff 66 90 48 83 ec 08 89 7c 24 04 48 8d 7e 08 48 8d 74 24 04 e8 9a b6 44 00 48 83 c4 08 c3 48 c7 c7 59 9f ac 82 e8 c2 c4 04 00 <0f> 0b e9 3fd > RSP: 0018:ffffc9000042fbf8 EFLAGS: 00010046 > RAX: 000000000000000c RBX: 0000000000000000 RCX: ffffc9000042faf4 > RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff81193d29 > RBP: ffffc9000042fc18 R08: 0000000000000000 R09: 0000000000000001 > R10: 000000100f938416 R11: 0000000000000309 R12: ffff8880b941c140 > R13: 0000000000000000 R14: 0000000000000000 R15: ffff8880b941c140 > FS: 0000000000000000(0000) GS:ffff8880bca00000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 00007f2e8c0a32e0 CR3: 0000000002e10000 CR4: 00000000000006f0 > Call Trace: > send_signal+0x1c8/0x310 > do_notify_parent+0x50f/0x550 > release_task.part.21+0x4fd/0x620 > do_exit+0x6f6/0xaf0 > do_group_exit+0x42/0xb0 > get_signal+0x13b/0xbb0 > do_signal+0x2b/0x670 > ? __audit_syscall_exit+0x24d/0x2b0 > ? rcu_read_lock_sched_held+0x4d/0x60 > ? kfree+0x24c/0x2b0 > do_syscall_64+0x176/0x640 > ? trace_hardirqs_off_thunk+0x1a/0x1c > entry_SYSCALL_64_after_hwframe+0x49/0xb3 The immediate problem is as Christof noticed that "pid_alive(current) == false". This happens because do_notify_parent is called from the last thread to exit in a process after that thread has been reaped. The bigger issue is that do_notify_parent can be called from any process that manages to wait on a thread of a multi-threaded process from wait_task_zombie. So any logic based upon current for do_notify_parent is just nonsense, as current can be pretty much anything. So change do_notify_parent to call __send_signal directly. Inspecting the code it appears this problem has existed since the pid namespace support started handling this case in 2.6.30. This fix only backports to 7a0cf094944e ("signal: Correct namespace fixups of si_pid and si_uid") where the problem logic was moved out of __send_signal and into send_signal. Cc: stable@vger.kernel.org Fixes: 6588c1e3ff01 ("signals: SI_USER: Masquerade si_pid when crossing pid ns boundary") Ref: 921cf9f63089 ("signals: protect cinit from unblocked SIG_DFL signals") Link: https://lore.kernel.org/lkml/20200419201336.GI22017@edge.cmeerw.net/ Reported-by: Christof Meerwald <cmeerw@cmeerw.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-04-21bpf: Fix handling of XADD on BTF memoryJann Horn1-1/+1
check_xadd() can cause check_ptr_to_btf_access() to be executed with atype==BPF_READ and value_regno==-1 (meaning "just check whether the access is okay, don't tell me what type it will result in"). Handle that case properly and skip writing type information, instead of indexing into the registers at index -1 and writing into out-of-bounds memory. Note that at least at the moment, you can't actually write through a BTF pointer, so check_xadd() will reject the program after calling check_ptr_to_btf_access with atype==BPF_WRITE; but that's after the verifier has already corrupted memory. This patch assumes that BTF pointers are not available in unprivileged programs. Fixes: 9e15db66136a ("bpf: Implement accurate raw_tp context access via BTF") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200417000007.10734-2-jannh@google.com
2020-04-21bpf: Forbid XADD on spilled pointers for unprivileged usersJann Horn1-9/+19
When check_xadd() verifies an XADD operation on a pointer to a stack slot containing a spilled pointer, check_stack_read() verifies that the read, which is part of XADD, is valid. However, since the placeholder value -1 is passed as `value_regno`, check_stack_read() can only return a binary decision and can't return the type of the value that was read. The intent here is to verify whether the value read from the stack slot may be used as a SCALAR_VALUE; but since check_stack_read() doesn't check the type, and the type information is lost when check_stack_read() returns, this is not enforced, and a malicious user can abuse XADD to leak spilled kernel pointers. Fix it by letting check_stack_read() verify that the value is usable as a SCALAR_VALUE if no type information is passed to the caller. To be able to use __is_pointer_value() in check_stack_read(), move it up. Fix up the expected unprivileged error message for a BPF selftest that, until now, assumed that unprivileged users can use XADD on stack-spilled pointers. This also gives us a test for the behavior introduced in this patch for free. In theory, this could also be fixed by forbidding XADD on stack spills entirely, since XADD is a locked operation (for operations on memory with concurrency) and there can't be any concurrency on the BPF stack; but Alexei has said that he wants to keep XADD on stack slots working to avoid changes to the test suite [1]. The following BPF program demonstrates how to leak a BPF map pointer as an unprivileged user using this bug: // r7 = map_pointer BPF_LD_MAP_FD(BPF_REG_7, small_map), // r8 = launder(map_pointer) BPF_STX_MEM(BPF_DW, BPF_REG_FP, BPF_REG_7, -8), BPF_MOV64_IMM(BPF_REG_1, 0), ((struct bpf_insn) { .code = BPF_STX | BPF_DW | BPF_XADD, .dst_reg = BPF_REG_FP, .src_reg = BPF_REG_1, .off = -8 }), BPF_LDX_MEM(BPF_DW, BPF_REG_8, BPF_REG_FP, -8), // store r8 into map BPF_MOV64_REG(BPF_REG_ARG1, BPF_REG_7), BPF_MOV64_REG(BPF_REG_ARG2, BPF_REG_FP), BPF_ALU64_IMM(BPF_ADD, BPF_REG_ARG2, -4), BPF_ST_MEM(BPF_W, BPF_REG_ARG2, 0, 0), BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem), BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1), BPF_EXIT_INSN(), BPF_STX_MEM(BPF_DW, BPF_REG_0, BPF_REG_8, 0), BPF_MOV64_IMM(BPF_REG_0, 0), BPF_EXIT_INSN() [1] https://lore.kernel.org/bpf/20200416211116.qxqcza5vo2ddnkdq@ast-mbp.dhcp.thefacebook.com/ Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200417000007.10734-1-jannh@google.com
2020-04-21cpumap: Avoid warning when CONFIG_DEBUG_PER_CPU_MAPS is enabledToke Høiland-Jørgensen1-1/+1
When the kernel is built with CONFIG_DEBUG_PER_CPU_MAPS, the cpumap code can trigger a spurious warning if CONFIG_CPUMASK_OFFSTACK is also set. This happens because in this configuration, NR_CPUS can be larger than nr_cpumask_bits, so the initial check in cpu_map_alloc() is not sufficient to guard against hitting the warning in cpumask_check(). Fix this by explicitly checking the supplied key against the nr_cpumask_bits variable before calling cpu_possible(). Fixes: 6710e1126934 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Xiumei Mu <xmu@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200416083120.453718-1-toke@redhat.com
2020-04-21audit: check the length of userspace generated audit recordsPaul Moore1-0/+3
Commit 756125289285 ("audit: always check the netlink payload length in audit_receive_msg()") fixed a number of missing message length checks, but forgot to check the length of userspace generated audit records. The good news is that you need CAP_AUDIT_WRITE to submit userspace audit records, which is generally only given to trusted processes, so the impact should be limited. Cc: stable@vger.kernel.org Fixes: 756125289285 ("audit: always check the netlink payload length in audit_receive_msg()") Reported-by: syzbot+49e69b4d71a420ceda3e@syzkaller.appspotmail.com Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-04-19Merge tag 'timers-urgent-2020-04-19' of ↵Linus Torvalds1-1/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull time namespace fix from Thomas Gleixner: "An update for the proc interface of time namespaces: Use symbolic names instead of clockid numbers. The usability nuisance of numbers was noticed by Michael when polishing the man page" * tag 'timers-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: proc, time/namespace: Show clock symbolic names in /proc/pid/timens_offsets
2020-04-19Merge tag 'irq-urgent-2020-04-19' of ↵Linus Torvalds1-44/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of fixes/updates for the interrupt subsystem: - Remove setup_irq() and remove_irq(). All users have been converted so remove them before new users surface. - A set of bugfixes for various interrupt chip drivers - Add a few missing static attributes to address sparse warnings" * tag 'irq-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-bcm7038-l1: Make bcm7038_l1_of_init() static irqchip/irq-mvebu-icu: Make legacy_bindings static irqchip/meson-gpio: Fix HARDIRQ-safe -> HARDIRQ-unsafe lock order irqchip/sifive-plic: Fix maximum priority threshold value irqchip/ti-sci-inta: Fix processing of masked irqs irqchip/mbigen: Free msi_desc on device teardown irqchip/gic-v4.1: Update effective affinity of virtual SGIs irqchip/gic-v4.1: Add support for VPENDBASER's Dirty+Valid signaling genirq: Remove setup_irq() and remove_irq()
2020-04-19Merge tag 'sched-urgent-2020-04-19' of ↵Linus Torvalds2-4/+21
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "Two fixes for the scheduler: - Work around an uninitialized variable warning where GCC can't figure it out. - Allow 'isolcpus=' to skip unknown subparameters so that older kernels work with the commandline of a newer kernel. Improve the error output while at it" * tag 'sched-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/vtime: Work around an unitialized variable warning sched/isolation: Allow "isolcpus=" to skip unknown sub-parameters
2020-04-19Merge tag 'core-urgent-2020-04-19' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU fix from Thomas Gleixner: "A single bugfix for RCU to prevent taking a lock in NMI context" * tag 'core-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Don't acquire lock in NMI handler in rcu_nmi_enter_common()
2020-04-18Merge tag 'for-linus-2020-04-18' of ↵Linus Torvalds2-10/+15
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull thread fixes from Christian Brauner: "A few fixes and minor improvements: - Correctly validate the cgroup file descriptor when clone3() is used with CLONE_INTO_CGROUP. - Check that a new enough version of struct clone_args is passed which supports the cgroup file descriptor argument when CLONE_INTO_CGROUP is set in the flags argument. - Catch nonsensical struct clone_args layouts at build time. - Catch extensions of struct clone_args without updating the uapi visible size definitions at build time. - Check whether the signal is valid early in kill_pid_usb_asyncio() before doing further work. - Replace open-coded rcu_read_lock()+kill_pid_info()+rcu_read_unlock() sequence in kill_something_info() with kill_proc_info() which is a dedicated helper to do just that" * tag 'for-linus-2020-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: clone3: add build-time CLONE_ARGS_SIZE_VER* validity checks clone3: add a check for the user struct size if CLONE_INTO_CGROUP is set clone3: fix cgroup argument sanity check signal: use kill_proc_info instead of kill_pid_info in kill_something_info signal: check sig before setting info in kill_pid_usb_asyncio
2020-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds3-12/+9
Pull networking fixes from David Miller: 1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel. 2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet. 3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing. 4) Adjust icmp6 message source address selection when routes have a preferred source address set, from Tim Stallard. 5) Be sure to validate HSR protocol version when creating new links, from Taehee Yoo. 6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in non-initial namespaces, from Michael Weiß. 7) Missing release firmware call in mlx5, from Eran Ben Elisha. 8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from Taehee Yoo. 9) Fix pause frame negotiation in marvell phy driver, from Clemens Gruber. 10) Record RX queue early enough in tun packet paths such that XDP programs will see the correct RX queue index, from Gilberto Bertin. 11) Fix double unlock in mptcp, from Florian Westphal. 12) Fix offset overflow in ARM bpf JIT, from Luke Nelson. 13) marvell10g needs to soft reset PHY when coming out of low power mode, from Russell King. 14) Fix MTU setting regression in stmmac for some chip types, from Florian Fainelli. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits) amd-xgbe: Use __napi_schedule() in BH context mISDN: make dmril and dmrim static net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode tipc: fix incorrect increasing of link window Documentation: Fix tcp_challenge_ack_limit default value net: tulip: make early_486_chipsets static dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400 ipv6: remove redundant assignment to variable err net/rds: Use ERR_PTR for rds_message_alloc_sgs() net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge selftests/bpf: Check for correct program attach/detach in xdp_attach test libbpf: Fix type of old_fd in bpf_xdp_set_link_opts libbpf: Always specify expected_attach_type on program load if supported xsk: Add missing check on user supplied headroom size mac80211: fix channel switch trigger from unknown mesh peer mac80211: fix race in ieee80211_register_hw() net: marvell10g: soft-reset the PHY when coming out of low power net: marvell10g: report firmware version net/cxgb4: Check the return from t4_query_params properly ...
2020-04-16proc, time/namespace: Show clock symbolic names in /proc/pid/timens_offsetsAndrei Vagin1-1/+14
Michael Kerrisk suggested to replace numeric clock IDs with symbolic names. Now the content of these files looks like this: $ cat /proc/774/timens_offsets monotonic 864000 0 boottime 1728000 0 For setting offsets, both representations of clocks (numeric and symbolic) can be used. As for compatibility, it is acceptable to change things as long as userspace doesn't care. The format of timens_offsets files is very new and there are no userspace tools yet which rely on this format. But three projects crun, util-linux and criu rely on the interface of setting time offsets and this is why it's required to continue supporting the numeric clock IDs on write. Fixes: 04a8682a71be ("fs/proc: Introduce /proc/pid/timens_offsets") Suggested-by: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200411154031.642557-1-avagin@gmail.com
2020-04-15sched/vtime: Work around an unitialized variable warningBorislav Petkov1-2/+2
Work around this warning: kernel/sched/cputime.c: In function ‘kcpustat_field’: kernel/sched/cputime.c:1007:6: warning: ‘val’ may be used uninitialized in this function [-Wmaybe-uninitialized] because GCC can't see that val is used only when err is 0. Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200327214334.GF8015@zn.tnic
2020-04-15sched/isolation: Allow "isolcpus=" to skip unknown sub-parametersPeter Xu1-2/+19
The "isolcpus=" parameter allows sub-parameters before the cpulist is specified, and if the parser detects an unknown sub-parameters the whole parameter will be ignored. This design is incompatible with itself when new sub-parameters are added. An older kernel will not recognize the new sub-parameter and will invalidate the whole parameter so the CPU isolation will not take effect. It emits a warning: isolcpus: Error, unknown flag The better and compatible way is to allow "isolcpus=" to skip unknown sub-parameters, so that even if new sub-parameters are added an older kernel will still be able to behave as usual even if with the new sub-parameter specified on the command line. Ideally this should have been there when the first sub-parameter for "isolcpus=" was introduced. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200403223517.406353-1-peterx@redhat.com
2020-04-15clone3: add build-time CLONE_ARGS_SIZE_VER* validity checksEugene Syromiatnikov1-0/+8
CLONE_ARGS_SIZE_VER* macros are defined explicitly and not via the offsets of the relevant struct clone_args fields, which makes it rather error-prone, so it probably makes sense to add some compile-time checks for them (including the one that breaks on struct clone_args extension as a reminder to add a relevant size macro and a similar check). Function copy_clone_args_from_user seems to be a good place for such checks. Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200412202658.GA31499@asgard.redhat.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-04-15clone3: add a check for the user struct size if CLONE_INTO_CGROUP is setEugene Syromiatnikov1-1/+2
Passing CLONE_INTO_CGROUP with an under-sized structure (that doesn't properly contain cgroup field) seems like garbage input, especially considering the fact that fd 0 is a valid descriptor. Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200412203123.GA5869@asgard.redhat.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-04-15clone3: fix cgroup argument sanity checkEugene Syromiatnikov1-1/+1
Checking that cgroup field value of struct clone_args is less than 0 is useless, as it is defined as unsigned 64-bit integer. Moreover, it doesn't catch the situations where its higher bits are lost during the assignment to the cgroup field of the cgroup field of the internal struct kernel_clone_args (where it is declared as signed 32-bit integer), so it is still possible to pass garbage there. A check against INT_MAX solves both these issues. Fixes: ef2c41cf38a7559b ("clone3: allow spawning processes into cgroups") Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200412202533.GA29554@asgard.redhat.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-04-15tracing: Fix the race between registering 'snapshot' event trigger and ↵Xiao Yang1-7/+3
triggering 'snapshot' operation Traced event can trigger 'snapshot' operation(i.e. calls snapshot_trigger() or snapshot_count_trigger()) when register_snapshot_trigger() has completed registration but doesn't allocate buffer for 'snapshot' event trigger. In the rare case, 'snapshot' operation always detects the lack of allocated buffer so make register_snapshot_trigger() allocate buffer first. trigger-snapshot.tc in kselftest reproduces the issue on slow vm: ----------------------------------------------------------- cat trace ... ftracetest-3028 [002] .... 236.784290: sched_process_fork: comm=ftracetest pid=3028 child_comm=ftracetest child_pid=3036 <...>-2875 [003] .... 240.460335: tracing_snapshot_instance_cond: *** SNAPSHOT NOT ALLOCATED *** <...>-2875 [003] .... 240.460338: tracing_snapshot_instance_cond: *** stopping trace here! *** ----------------------------------------------------------- Link: http://lkml.kernel.org/r/20200414015145.66236-1-yangx.jy@cn.fujitsu.com Cc: stable@vger.kernel.org Fixes: 93e31ffbf417a ("tracing: Add 'snapshot' event trigger command") Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-04-14bpf: remove unneeded conversion to bool in __mark_reg_unknownZou Wei1-2/+1
This issue was detected by using the Coccinelle software: kernel/bpf/verifier.c:1259:16-21: WARNING: conversion to bool not needed here The conversion to bool is unneeded, remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/1586779076-101346-1-git-send-email-zou_wei@huawei.com
2020-04-14bpf: Prevent re-mmap()'ing BPF map as writable for initially r/o mappingAndrii Nakryiko1-9/+7
VM_MAYWRITE flag during initial memory mapping determines if already mmap()'ed pages can be later remapped as writable ones through mprotect() call. To prevent user application to rewrite contents of memory-mapped as read-only and subsequently frozen BPF map, remove VM_MAYWRITE flag completely on initially read-only mapping. Alternatively, we could treat any memory-mapping on unfrozen map as writable and bump writecnt instead. But there is little legitimate reason to map BPF map as read-only and then re-mmap() it as writable through mprotect(), instead of just mmap()'ing it as read/write from the very beginning. Also, at the suggestion of Jann Horn, drop unnecessary refcounting in mmap operations. We can just rely on VMA holding reference to BPF map's file properly. Fixes: fc9702273e2e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jann Horn <jannh@google.com> Link: https://lore.kernel.org/bpf/20200410202613.3679837-1-andriin@fb.com
2020-04-14genirq: Remove setup_irq() and remove_irq()afzal mohammed1-44/+0
Now that all the users of setup_irq() & remove_irq() have been replaced by request_irq() & free_irq() respectively, delete them. Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lkml.kernel.org/r/0aa8771ada1ac8e1312f6882980c9c08bd023148.1585320721.git.afzal.mohd.ma@gmail.com
2020-04-14Merge branch 'urgent-for-mingo' of ↵Ingo Molnar1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/urgent Pull RCU fix from Paul E. McKenney. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-04-12signal: use kill_proc_info instead of kill_pid_info in kill_something_infoZhiqiang Liu1-6/+2
signal.c provides kill_proc_info, we can use it instead of kill_pid_info in kill_something_info func gracefully. Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/80236965-f0b5-c888-95ff-855bdec75bb3@huawei.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-04-12signal: check sig before setting info in kill_pid_usb_asyncioZhiqiang Liu1-3/+3
In kill_pid_usb_asyncio, if signal is not valid, we do not need to set info struct. Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/f525fd08-1cf7-fb09-d20c-4359145eb940@huawei.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-04-12Merge tag 'timers-urgent-2020-04-12' of ↵Linus Torvalds2-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull time(keeping) updates from Thomas Gleixner: - Fix the time_for_children symlink in /proc/$PID/ so it properly reflects that it part of the 'time' namespace - Add the missing userns limit for the allowed number of time namespaces, which was half defined but the actual array member was not added. This went unnoticed as the array has an exessive empty member at the end but introduced a user visible regression as the output was corrupted. - Prevent further silent ucount corruption by adding a BUILD_BUG_ON() to catch half updated data. * tag 'timers-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ucount: Make sure ucounts in /proc/sys/user don't regress again time/namespace: Add max_time_namespaces ucount time/namespace: Fix time_for_children symlink
2020-04-12Merge tag 'sched-urgent-2020-04-12' of ↵Linus Torvalds5-62/+51
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes/updates from Thomas Gleixner: - Deduplicate the average computations in the scheduler core and the fair class code. - Fix a raise between runtime distribution and assignement which can cause exceeding the quota by up to 70%. - Prevent negative results in the imbalanace calculation - Remove a stale warning in the workqueue code which can be triggered since the call site was moved out of preempt disabled code. It's a false positive. - Deduplicate the print macros for procfs - Add the ucmap values to the SCHED_DEBUG procfs output for completness * tag 'sched-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Add task uclamp values to SCHED_DEBUG procfs sched/debug: Factor out printing formats into common macros sched/debug: Remove redundant macro define sched/core: Remove unused rq::last_load_update_tick workqueue: Remove the warning in wq_worker_sleeping() sched/fair: Fix negative imbalance in imbalance calculation sched/fair: Fix race between runtime distribution and assignment sched/fair: Align rq->avg_idle and rq->avg_scan_cost
2020-04-12Merge tag 'perf-urgent-2020-04-12' of ↵Linus Torvalds1-31/+51
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "Three fixes/updates for perf: - Fix the perf event cgroup tracking which tries to track the cgroup even for disabled events. - Add Ice Lake server support for uncore events - Disable pagefaults when retrieving the physical address in the sampling code" * tag 'perf-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Disable page faults when getting phys address perf/x86/intel/uncore: Add Ice Lake server uncore support perf/cgroup: Correct indirection in perf_less_group_idx() perf/core: Fix event cgroup tracking
2020-04-12Merge tag 'locking-urgent-2020-04-12' of ↵Linus Torvalds2-21/+33
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "Three small fixes/updates for the locking core code: - Plug a task struct reference leak in the percpu rswem implementation. - Document the refcount interaction with PID_MAX_LIMIT - Improve the 'invalid wait context' data dump in lockdep so it contains all information which is required to decode the problem" * tag 'locking-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Improve 'invalid wait context' splat locking/refcount: Document interaction with PID_MAX_LIMIT locking/percpu-rwsem: Fix a task_struct refcount
2020-04-11Merge tag 'dma-mapping-5.7-1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds2-4/+8
Pull dma-mapping fixes from Christoph Hellwig: - fix an integer truncation in dma_direct_get_required_mask (Kishon Vijay Abraham) - fix the display of dma mapping types (Grygorii Strashko) * tag 'dma-mapping-5.7-1' of git://git.infradead.org/users/hch/dma-mapping: dma-debug: fix displaying of dma allocation type dma-direct: fix data truncation in dma_direct_get_required_mask()
2020-04-11Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-3/+3
Merge yet more updates from Andrew Morton: - Almost all of the rest of MM (memcg, slab-generic, slab, pagealloc, gup, hugetlb, pagemap, memremap) - Various other things (hfs, ocfs2, kmod, misc, seqfile) * akpm: (34 commits) ipc/util.c: sysvipc_find_ipc() should increase position index kernel/gcov/fs.c: gcov_seq_next() should increase position index fs/seq_file.c: seq_read(): add info message about buggy .next functions drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings change email address for Pali Rohár selftests: kmod: test disabling module autoloading selftests: kmod: fix handling test numbers above 9 docs: admin-guide: document the kernel.modprobe sysctl fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once() kmod: make request_module() return an error when autoloading is disabled mm/memremap: set caching mode for PCI P2PDMA memory to WC mm/memory_hotplug: add pgprot_t to mhp_params powerpc/mm: thread pgprot_t through create_section_mapping() x86/mm: introduce __set_memory_prot() x86/mm: thread pgprot_t through init_memory_mapping() mm/memory_hotplug: rename mhp_restrictions to mhp_params mm/memory_hotplug: drop the flags field from struct mhp_restrictions mm/special: create generic fallbacks for pte_special() and pte_mkspecial() mm/vma: introduce VM_ACCESS_FLAGS mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS ...
2020-04-11kernel/gcov/fs.c: gcov_seq_next() should increase position indexVasily Averin1-1/+1
If seq_file .next function does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: NeilBrown <neilb@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Waiman Long <longman@redhat.com> Link: http://lkml.kernel.org/r/f65c6ee7-bd00-f910-2f8a-37cc67e4ff88@virtuozzo.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-11kmod: make request_module() return an error when autoloading is disabledEric Biggers1-2/+2
Patch series "module autoloading fixes and cleanups", v5. This series fixes a bug where request_module() was reporting success to kernel code when module autoloading had been completely disabled via 'echo > /proc/sys/kernel/modprobe'. It also addresses the issues raised on the original thread (https://lkml.kernel.org/lkml/20200310223731.126894-1-ebiggers@kernel.org/T/#u) bydocumenting the modprobe sysctl, adding a self-test for the empty path case, and downgrading a user-reachable WARN_ONCE(). This patch (of 4): It's long been possible to disable kernel module autoloading completely (while still allowing manual module insertion) by setting /proc/sys/kernel/modprobe to the empty string. This can be preferable to setting it to a nonexistent file since it avoids the overhead of an attempted execve(), avoids potential deadlocks, and avoids the call to security_kernel_module_request() and thus on SELinux-based systems eliminates the need to write SELinux rules to dontaudit module_request. However, when module autoloading is disabled in this way, request_module() returns 0. This is broken because callers expect 0 to mean that the module was successfully loaded. Apparently this was never noticed because this method of disabling module autoloading isn't used much, and also most callers don't use the return value of request_module() since it's always necessary to check whether the module registered its functionality or not anyway. But improperly returning 0 can indeed confuse a few callers, for example get_fs_type() in fs/filesystems.c where it causes a WARNING to be hit: if (!fs && (request_module("fs-%.*s", len, name) == 0)) { fs = __get_fs_type(name, len); WARN_ONCE(!fs, "request_module fs-%.*s succeeded, but still no fs?\n", len, name); } This is easily reproduced with: echo > /proc/sys/kernel/modprobe mount -t NONEXISTENT none / It causes: request_module fs-NONEXISTENT succeeded, but still no fs? WARNING: CPU: 1 PID: 1106 at fs/filesystems.c:275 get_fs_type+0xd6/0xf0 [...] This should actually use pr_warn_once() rather than WARN_ONCE(), since it's also user-reachable if userspace immediately unloads the module. Regardless, request_module() should correctly return an error when it fails. So let's make it return -ENOENT, which matches the error when the modprobe binary doesn't exist. I've also sent patches to document and test this case. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Jessica Yu <jeyu@kernel.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Ben Hutchings <benh@debian.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200310223731.126894-1-ebiggers@kernel.org Link: http://lkml.kernel.org/r/20200312202552.241885-1-ebiggers@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-30 13:32:14 +0300