summaryrefslogtreecommitdiff
path: root/kernel/sys.c
AgeCommit message (Collapse)AuthorFilesLines
2020-03-03sys/sysinfo: Respect boottime inside time namespaceCyril Hrubis1-0/+2
The sysinfo() syscall includes uptime in seconds but has no correction for time namespaces which makes it inconsistent with the /proc/uptime inside of a time namespace. Add the missing time namespace adjustment call. Signed-off-by: Cyril Hrubis <chrubis@suse.cz> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Dmitry Safonov <dima@arista.com> Link: https://lkml.kernel.org/r/20200303150638.7329-1-chrubis@suse.cz
2020-01-28prctl: PR_{G,S}ET_IO_FLUSHER to support controlling memory reclaimMike Christie1-0/+25
There are several storage drivers like dm-multipath, iscsi, tcmu-runner, amd nbd that have userspace components that can run in the IO path. For example, iscsi and nbd's userspace deamons may need to recreate a socket and/or send IO on it, and dm-multipath's daemon multipathd may need to send SG IO or read/write IO to figure out the state of paths and re-set them up. In the kernel these drivers have access to GFP_NOIO/GFP_NOFS and the memalloc_*_save/restore functions to control the allocation behavior, but for userspace we would end up hitting an allocation that ended up writing data back to the same device we are trying to allocate for. The device is then in a state of deadlock, because to execute IO the device needs to allocate memory, but to allocate memory the memory layers want execute IO to the device. Here is an example with nbd using a local userspace daemon that performs network IO to a remote server. We are using XFS on top of the nbd device, but it can happen with any FS or other modules layered on top of the nbd device that can write out data to free memory. Here a nbd daemon helper thread, msgr-worker-1, is performing a write/sendmsg on a socket to execute a request. This kicks off a reclaim operation which results in a WRITE to the nbd device and the nbd thread calling back into the mm layer. [ 1626.609191] msgr-worker-1 D 0 1026 1 0x00004000 [ 1626.609193] Call Trace: [ 1626.609195] ? __schedule+0x29b/0x630 [ 1626.609197] ? wait_for_completion+0xe0/0x170 [ 1626.609198] schedule+0x30/0xb0 [ 1626.609200] schedule_timeout+0x1f6/0x2f0 [ 1626.609202] ? blk_finish_plug+0x21/0x2e [ 1626.609204] ? _xfs_buf_ioapply+0x2e6/0x410 [ 1626.609206] ? wait_for_completion+0xe0/0x170 [ 1626.609208] wait_for_completion+0x108/0x170 [ 1626.609210] ? wake_up_q+0x70/0x70 [ 1626.609212] ? __xfs_buf_submit+0x12e/0x250 [ 1626.609214] ? xfs_bwrite+0x25/0x60 [ 1626.609215] xfs_buf_iowait+0x22/0xf0 [ 1626.609218] __xfs_buf_submit+0x12e/0x250 [ 1626.609220] xfs_bwrite+0x25/0x60 [ 1626.609222] xfs_reclaim_inode+0x2e8/0x310 [ 1626.609224] xfs_reclaim_inodes_ag+0x1b6/0x300 [ 1626.609227] xfs_reclaim_inodes_nr+0x31/0x40 [ 1626.609228] super_cache_scan+0x152/0x1a0 [ 1626.609231] do_shrink_slab+0x12c/0x2d0 [ 1626.609233] shrink_slab+0x9c/0x2a0 [ 1626.609235] shrink_node+0xd7/0x470 [ 1626.609237] do_try_to_free_pages+0xbf/0x380 [ 1626.609240] try_to_free_pages+0xd9/0x1f0 [ 1626.609245] __alloc_pages_slowpath+0x3a4/0xd30 [ 1626.609251] ? ___slab_alloc+0x238/0x560 [ 1626.609254] __alloc_pages_nodemask+0x30c/0x350 [ 1626.609259] skb_page_frag_refill+0x97/0xd0 [ 1626.609274] sk_page_frag_refill+0x1d/0x80 [ 1626.609279] tcp_sendmsg_locked+0x2bb/0xdd0 [ 1626.609304] tcp_sendmsg+0x27/0x40 [ 1626.609307] sock_sendmsg+0x54/0x60 [ 1626.609308] ___sys_sendmsg+0x29f/0x320 [ 1626.609313] ? sock_poll+0x66/0xb0 [ 1626.609318] ? ep_item_poll.isra.15+0x40/0xc0 [ 1626.609320] ? ep_send_events_proc+0xe6/0x230 [ 1626.609322] ? hrtimer_try_to_cancel+0x54/0xf0 [ 1626.609324] ? ep_read_events_proc+0xc0/0xc0 [ 1626.609326] ? _raw_write_unlock_irq+0xa/0x20 [ 1626.609327] ? ep_scan_ready_list.constprop.19+0x218/0x230 [ 1626.609329] ? __hrtimer_init+0xb0/0xb0 [ 1626.609331] ? _raw_spin_unlock_irq+0xa/0x20 [ 1626.609334] ? ep_poll+0x26c/0x4a0 [ 1626.609337] ? tcp_tsq_write.part.54+0xa0/0xa0 [ 1626.609339] ? release_sock+0x43/0x90 [ 1626.609341] ? _raw_spin_unlock_bh+0xa/0x20 [ 1626.609342] __sys_sendmsg+0x47/0x80 [ 1626.609347] do_syscall_64+0x5f/0x1c0 [ 1626.609349] ? prepare_exit_to_usermode+0x75/0xa0 [ 1626.609351] entry_SYSCALL_64_after_hwframe+0x44/0xa9 This patch adds a new prctl command that daemons can use after they have done their initial setup, and before they start to do allocations that are in the IO path. It sets the PF_MEMALLOC_NOIO and PF_LESS_THROTTLE flags so both userspace block and FS threads can use it to avoid the allocation recursion and try to prevent from being throttled while writing out data to free up memory. Signed-off-by: Mike Christie <mchristi@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Tested-by: Masato Suzuki <masato.suzuki@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Link: https://lore.kernel.org/r/20191112001900.9206-1-mchristi@redhat.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2019-12-05kernel/sys.c: avoid copying possible padding bytes in copy_to_userJoe Perches1-1/+3
Initialization is not guaranteed to zero padding bytes so use an explicit memset instead to avoid leaking any kernel content in any possible padding bytes. Link: http://lkml.kernel.org/r/dfa331c00881d61c8ee51577a082d8bebd61805c.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-15y2038: rusage: use __kernel_old_timevalArnd Bergmann1-2/+2
There are two 'struct timeval' fields in 'struct rusage'. Unfortunately the definition of timeval is now ambiguous when used in user space with a libc that has a 64-bit time_t, and this also changes the 'rusage' definition in user space in a way that is incompatible with the system call interface. While there is no good solution to avoid all ambiguity here, change the definition in the kernel headers to be compatible with the kernel ABI, using __kernel_old_timeval as an unambiguous base type. In previous discussions, there was also a plan to add a replacement for rusage based on 64-bit timestamps and nanosecond resolution, i.e. 'struct __kernel_timespec'. I have patches for that as well, if anyone thinks we should do that. Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-17Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-13/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core timer updates from Thomas Gleixner: "Timers and timekeeping updates: - A large overhaul of the posix CPU timer code which is a preparation for moving the CPU timer expiry out into task work so it can be properly accounted on the task/process. An update to the bogus permission checks will come later during the merge window as feedback was not complete before heading of for travel. - Switch the timerqueue code to use cached rbtrees and get rid of the homebrewn caching of the leftmost node. - Consolidate hrtimer_init() + hrtimer_init_sleeper() calls into a single function - Implement the separation of hrtimers to be forced to expire in hard interrupt context even when PREEMPT_RT is enabled and mark the affected timers accordingly. - Implement a mechanism for hrtimers and the timer wheel to protect RT against priority inversion and live lock issues when a (hr)timer which should be canceled is currently executing the callback. Instead of infinitely spinning, the task which tries to cancel the timer blocks on a per cpu base expiry lock which is held and released by the (hr)timer expiry code. - Enable the Hyper-V TSC page based sched_clock for Hyper-V guests resulting in faster access to timekeeping functions. - Updates to various clocksource/clockevent drivers and their device tree bindings. - The usual small improvements all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits) posix-cpu-timers: Fix permission check regression posix-cpu-timers: Always clear head pointer on dequeue hrtimer: Add a missing bracket and hide `migration_base' on !SMP posix-cpu-timers: Make expiry_active check actually work correctly posix-timers: Unbreak CONFIG_POSIX_TIMERS=n build tick: Mark sched_timer to expire in hard interrupt context hrtimer: Add kernel doc annotation for HRTIMER_MODE_HARD x86/hyperv: Hide pv_ops access for CONFIG_PARAVIRT=n posix-cpu-timers: Utilize timerqueue for storage posix-cpu-timers: Move state tracking to struct posix_cputimers posix-cpu-timers: Deduplicate rlimit handling posix-cpu-timers: Remove pointless comparisons posix-cpu-timers: Get rid of 64bit divisions posix-cpu-timers: Consolidate timer expiry further posix-cpu-timers: Get rid of zero checks rlimit: Rewrite non-sensical RLIMIT_CPU comment posix-cpu-timers: Respect INFINITY for hard RTTIME limit posix-cpu-timers: Switch thread group sampling to array posix-cpu-timers: Restructure expiry array posix-cpu-timers: Remove cputime_expires ...
2019-09-17Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds1-14/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu-feature updates from Ingo Molnar: - Rework the Intel model names symbols/macros, which were decades of ad-hoc extensions and added random noise. It's now a coherent, easy to follow nomenclature. - Add new Intel CPU model IDs: - "Tiger Lake" desktop and mobile models - "Elkhart Lake" model ID - and the "Lightning Mountain" variant of Airmont, plus support code - Add the new AVX512_VP2INTERSECT instruction to cpufeatures - Remove Intel MPX user-visible APIs and the self-tests, because the toolchain (gcc) is not supporting it going forward. This is the first, lowest-risk phase of MPX removal. - Remove X86_FEATURE_MFENCE_RDTSC - Various smaller cleanups and fixes * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) x86/cpu: Update init data for new Airmont CPU model x86/cpu: Add new Airmont variant to Intel family x86/cpu: Add Elkhart Lake to Intel family x86/cpu: Add Tiger Lake to Intel family x86: Correct misc typos x86/intel: Add common OPTDIFFs x86/intel: Aggregate microserver naming x86/intel: Aggregate big core graphics naming x86/intel: Aggregate big core mobile naming x86/intel: Aggregate big core client naming x86/cpufeature: Explain the macro duplication x86/ftrace: Remove mcount() declaration x86/PCI: Remove superfluous returns from void functions x86/msr-index: Move AMD MSRs where they belong x86/cpu: Use constant definitions for CPU models lib: Remove redundant ftrace flag removal x86/crash: Remove unnecessary comparison x86/bitops: Use __builtin_constant_p() directly instead of IS_IMMEDIATE() x86: Remove X86_FEATURE_MFENCE_RDTSC x86/mpx: Remove MPX APIs ...
2019-08-28posix-cpu-timers: Get rid of zero checksThomas Gleixner1-9/+0
Deactivation of the expiry cache is done by setting all clock caches to 0. That requires to have a check for zero in all places which update the expiry cache: if (cache == 0 || new < cache) cache = new; Use U64_MAX as the deactivated value, which allows to remove the zero checks when updating the cache and reduces it to the obvious check: if (new < cache) cache = new; This also removes the weird workaround in do_prlimit() which was required to convert a RLIMIT_CPU value of 0 (immediate expiry) to 1 because handing in 0 to the posix CPU timer code would have effectively disarmed it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lkml.kernel.org/r/20190821192922.275086128@linutronix.de
2019-08-28rlimit: Rewrite non-sensical RLIMIT_CPU commentThomas Gleixner1-4/+3
The comment above the function which arms RLIMIT_CPU in the posix CPU timer code makes no sense at all. It claims that the kernel does not return an error code when it rejected the attempt to set RLIMIT_CPU. That's clearly bogus as the code does an error check and the rlimit is only set and activated when the permission checks are ok. In case of a rejection an appropriate error code is returned. This is a historical and outdated comment which got dragged along even when the rlimit handling code was rewritten. Replace it with an explanation why the setup function is not called when the rlimit value is RLIM_INFINITY and how the 'disarming' is handled. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lkml.kernel.org/r/20190821192922.185511287@linutronix.de
2019-08-20arm64: Tighten the PR_{SET, GET}_TAGGED_ADDR_CTRL prctl() unused argumentsCatalin Marinas1-0/+4
Require that arg{3,4,5} of the PR_{SET,GET}_TAGGED_ADDR_CTRL prctl and arg2 of the PR_GET_TAGGED_ADDR_CTRL prctl() are zero rather than ignored for future extensions. Acked-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-08-06arm64: Introduce prctl() options to control the tagged user addresses ABICatalin Marinas1-0/+12
It is not desirable to relax the ABI to allow tagged user addresses into the kernel indiscriminately. This patch introduces a prctl() interface for enabling or disabling the tagged ABI with a global sysctl control for preventing applications from enabling the relaxed ABI (meant for testing user-space prctl() return error checking without reconfiguring the kernel). The ABI properties are inherited by threads of the same application and fork()'ed children but cleared on execve(). A Kconfig option allows the overall disabling of the relaxed ABI. The PR_SET_TAGGED_ADDR_CTRL will be expanded in the future to handle MTE-specific settings like imprecise vs precise exceptions. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-07-22x86/mpx: Remove MPX APIsDave Hansen1-14/+2
MPX is being removed from the kernel due to a lack of support in the toolchain going forward (gcc). The first step is to remove the userspace-visible ABIs so that applications will stop using it. The most visible one are the enable/disable prctl()s. Remove them first. This is the most minimal and least invasive change needed to ensure that apps stop using MPX with new kernels. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190705175321.DB42F0AD@viggo.jf.intel.com
2019-06-02prctl_set_mm: downgrade mmap_sem to read lockMichal Koutný1-2/+9
The commit a3b609ef9f8b ("proc read mm's {arg,env}_{start,end} with mmap semaphore taken.") added synchronization of reading argument/environment boundaries under mmap_sem. Later commit 88aa7cc688d4 ("mm: introduce arg_lock to protect arg_start|end and env_start|end in mm_struct") avoided the coarse use of mmap_sem in similar situations. But there still remained two places that (mis)use mmap_sem. get_cmdline should also use arg_lock instead of mmap_sem when it reads the boundaries. The second place that should use arg_lock is in prctl_set_mm. By protecting the boundaries fields with the arg_lock, we can downgrade mmap_sem to reader lock (analogous to what we already do in prctl_set_mm_map). [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20190502125203.24014-3-mkoutny@suse.com Fixes: 88aa7cc688d4 ("mm: introduce arg_lock to protect arg_start|end and env_start|end in mm_struct") Signed-off-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Co-developed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-02prctl_set_mm: refactor checks from validate_prctl_mapMichal Koutný1-26/+25
Despite comment of validate_prctl_map claims there are no capability checks, it is not completely true since commit 4d28df6152aa ("prctl: Allow local CAP_SYS_ADMIN changing exe_file"). Extract the check out of the function and make the function perform purely arithmetic checks. This patch should not change any behavior, it is mere refactoring for following patch. [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20190502125203.24014-2-mkoutny@suse.com Signed-off-by: Michal Koutný <mkoutny@suse.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14kernel/sys.c: prctl: fix false positive in validate_prctl_map()Cyrill Gorcunov1-1/+1
While validating new map we require the @start_data to be strictly less than @end_data, which is fine for regular applications (this is why this nit didn't trigger for that long). These members are set from executable loaders such as elf handers, still it is pretty valid to have a loadable data section with zero size in file, in such case the start_data is equal to end_data once kernel loader finishes. As a result when we're trying to restore such programs the procedure fails and the kernel returns -EINVAL. From the image dump of a program: | "mm_start_code": "0x400000", | "mm_end_code": "0x8f5fb4", | "mm_start_data": "0xf1bfb0", | "mm_end_data": "0xf1bfb0", Thus we need to change validate_prctl_map from strictly less to less or equal operator use. Link: http://lkml.kernel.org/r/20190408143554.GY1421@uranus.lan Fixes: f606b77f1a9e3 ("prctl: PR_SET_MM -- introduce PR_SET_MM_MAP operation") Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Andrey Vagin <avagin@gmail.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-08Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-0/+1
Merge more updates from Andrew Morton: - some of the rest of MM - various misc things - dynamic-debug updates - checkpatch - some epoll speedups - autofs - rapidio - lib/, lib/lzo/ updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (83 commits) samples/mic/mpssd/mpssd.h: remove duplicate header kernel/fork.c: remove duplicated include include/linux/relay.h: fix percpu annotation in struct rchan arch/nios2/mm/fault.c: remove duplicate include unicore32: stop printing the virtual memory layout MAINTAINERS: fix GTA02 entry and mark as orphan mm: create the new vm_fault_t type arm, s390, unicore32: remove oneliner wrappers for memblock_alloc() arch: simplify several early memory allocations openrisc: simplify pte_alloc_one_kernel() sh: prefer memblock APIs returning virtual address microblaze: prefer memblock API returning virtual address powerpc: prefer memblock APIs returning virtual address lib/lzo: separate lzo-rle from lzo lib/lzo: implement run-length encoding lib/lzo: fast 8-byte copy on arm64 lib/lzo: 64-bit CTZ on arm64 lib/lzo: tidy-up ifdefs ipc/sem.c: replace kvmalloc/memset with kvzalloc and use struct_size ipc: annotate implicit fall through ...
2019-03-08kernel/sys: annotate implicit fall throughMathieu Malaterre1-0/+1
There is a plan to build the kernel with -Wimplicit-fallthrough and this place in the code produced a warning (W=1). This commit remove the following warning: kernel/sys.c:1748:6: warning: this statement may fall through [-Wimplicit-fallthrough=] Link: http://lkml.kernel.org/r/20190114203347.17530-1-malat@debian.org Signed-off-by: Mathieu Malaterre <malat@debian.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-25LSM: add SafeSetID module that gates setid callsMicah Morton1-5/+5
This change ensures that the set*uid family of syscalls in kernel/sys.c (setreuid, setuid, setresuid, setfsuid) all call ns_capable_common with the CAP_OPT_INSETID flag, so capability checks in the security_capable hook can know whether they are being called from within a set*uid syscall. This change is a no-op by itself, but is needed for the proposed SafeSetID LSM. Signed-off-by: Micah Morton <mortonm@chromium.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-01-14kernel/sys.c: Clarify that UNAME26 does not generate unique versions anymoreJonathan Neuschäfer1-1/+2
UNAME26 is a mechanism to report Linux's version as 2.6.x, for compatibility with old/broken software. Due to the way it is implemented, it would have to be updated after 5.0, to keep the resulting versions unique. Linus Torvalds argued: "Do we actually need this? I'd rather let it bitrot, and just let it return random versions. It will just start again at 2.4.60, won't it? Anybody who uses UNAME26 for a 5.x kernel might as well think it's still 4.x. The user space is so old that it can't possibly care about differences between 4.x and 5.x, can it? The only thing that matters is that it shows "2.4.<largeenough>", which it will do regardless" Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04Remove 'type' argument from access_ok() functionLinus Torvalds1-1/+1
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-13arm64: add prctl control for resetting ptrauth keysKristina Martsenko1-0/+8
Add an arm64-specific prctl to allow a thread to reinitialize its pointer authentication keys to random values. This can be useful when exec() is not used for starting new processes, to ensure that different processes still have different keys. Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-09-20kernel/sys.c: remove duplicated includeYueHaibing1-3/+0
Link: http://lkml.kernel.org/r/20180821133424.18716-1-yuehaibing@huawei.com Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24Merge branch 'userns-linus' of ↵Linus Torvalds1-50/+45
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull namespace fixes from Eric Biederman: "This is a set of four fairly obvious bug fixes: - a switch from d_find_alias to d_find_any_alias because the xattr code perversely takes a dentry - two mutex vs copy_to_user fixes from Jann Horn - a fix to use a sanitized size not the size userspace passed in from Christian Brauner" * 'userns-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: getxattr: use correct xattr length sys: don't hold uts_sem while accessing userspace memory userns: move user access out of the mutex cap_inode_getsecurity: use d_find_any_alias() instead of d_find_alias()
2018-08-11sys: don't hold uts_sem while accessing userspace memoryJann Horn1-50/+45
Holding uts_sem as a writer while accessing userspace memory allows a namespace admin to stall all processes that attempt to take uts_sem. Instead, move data through stack buffers and don't access userspace memory while uts_sem is held. Cc: stable@vger.kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2018-06-19sysinfo: Remove get_monotonic_boottime()Arnd Bergmann1-2/+2
get_monotonic_boottime() is deprecated because it uses the old 'timespec' structure. This replaces one of the last callers with a call to ktime_get_boottime. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: y2038@lists.linaro.org Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Link: https://lkml.kernel.org/r/20180618150114.849216-1-arnd@arndb.de
2018-06-08mm: introduce arg_lock to protect arg_start|end and env_start|end in mm_structYang Shi1-2/+8
mmap_sem is on the hot path of kernel, and it very contended, but it is abused too. It is used to protect arg_start|end and evn_start|end when reading /proc/$PID/cmdline and /proc/$PID/environ, but it doesn't make sense since those proc files just expect to read 4 values atomically and not related to VM, they could be set to arbitrary values by C/R. And, the mmap_sem contention may cause unexpected issue like below: INFO: task ps:14018 blocked for more than 120 seconds. Tainted: G E 4.9.79-009.ali3000.alios7.x86_64 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. ps D 0 14018 1 0x00000004 Call Trace: schedule+0x36/0x80 rwsem_down_read_failed+0xf0/0x150 call_rwsem_down_read_failed+0x18/0x30 down_read+0x20/0x40 proc_pid_cmdline_read+0xd9/0x4e0 __vfs_read+0x37/0x150 vfs_read+0x96/0x130 SyS_read+0x55/0xc0 entry_SYSCALL_64_fastpath+0x1a/0xc5 Both Alexey Dobriyan and Michal Hocko suggested to use dedicated lock for them to mitigate the abuse of mmap_sem. So, introduce a new spinlock in mm_struct to protect the concurrent access to arg_start|end, env_start|end and others, as well as replace write map_sem to read to protect the race condition between prctl and sys_brk which might break check_data_rlimit(), and makes prctl more friendly to other VM operations. This patch just eliminates the abuse of mmap_sem, but it can't resolve the above hung task warning completely since the later access_remote_vm() call needs acquire mmap_sem. The mmap_sem scalability issue will be solved in the future. [yang.shi@linux.alibaba.com: add comment about mmap_sem and arg_lock] Link: http://lkml.kernel.org/r/1524077799-80690-1-git-send-email-yang.shi@linux.alibaba.com Link: http://lkml.kernel.org/r/1523730291-109696-1-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-26kernel/sys.c: fix potential Spectre v1 issueGustavo A. R. Silva1-0/+5
`resource' can be controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: kernel/sys.c:1474 __do_compat_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap) kernel/sys.c:1455 __do_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap) Fix this by sanitizing *resource* before using it to index current->signal->rlim Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Link: http://lkml.kernel.org/r/20180515030038.GA11822@embeddedor.com Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-03nospec: Allow getting/setting on non-current taskKees Cook1-4/+5
Adjust arch_prctl_get/set_spec_ctrl() to operate on tasks other than current. This is needed both for /proc/$pid/status queries and for seccomp (since thread-syncing can trigger seccomp in non-current threads). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2018-05-03prctl: Add speculation control prctlsThomas Gleixner1-0/+22
Add two new prctls to control aspects of speculation related vulnerabilites and their mitigations to provide finer grained control over performance impacting mitigations. PR_GET_SPECULATION_CTRL returns the state of the speculation misfeature which is selected with arg2 of prctl(2). The return value uses bit 0-2 with the following meaning: Bit Define Description 0 PR_SPEC_PRCTL Mitigation can be controlled per task by PR_SET_SPECULATION_CTRL 1 PR_SPEC_ENABLE The speculation feature is enabled, mitigation is disabled 2 PR_SPEC_DISABLE The speculation feature is disabled, mitigation is enabled If all bits are 0 the CPU is not affected by the speculation misfeature. If PR_SPEC_PRCTL is set, then the per task control of the mitigation is available. If not set, prctl(PR_SET_SPECULATION_CTRL) for the speculation misfeature will fail. PR_SET_SPECULATION_CTRL allows to control the speculation misfeature, which is selected by arg2 of prctl(2) per task. arg3 is used to hand in the control value, i.e. either PR_SPEC_ENABLE or PR_SPEC_DISABLE. The common return values are: EINVAL prctl is not implemented by the architecture or the unused prctl() arguments are not 0 ENODEV arg2 is selecting a not supported speculation misfeature PR_SET_SPECULATION_CTRL has these additional return values: ERANGE arg3 is incorrect, i.e. it's not either PR_SPEC_ENABLE or PR_SPEC_DISABLE ENXIO prctl control of the selected speculation misfeature is disabled The first supported controlable speculation misfeature is PR_SPEC_STORE_BYPASS. Add the define so this can be shared between architectures. Based on an initial patch from Tim Chen and mostly rewritten. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2018-04-02kernel: add ksys_setsid() helper; remove in-kernel call to sys_setsid()Dominik Brodowski1-1/+6
Using this helper allows us to avoid the in-kernel call to the sys_setsid() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_setsid(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02kernel: provide ksys_*() wrappers for syscalls called by kernel/uid16.cDominik Brodowski1-8/+50
Using these helpers allows us to avoid the in-kernel calls to these syscalls: sys_setregid(), sys_setgid(), sys_setreuid(), sys_setuid(), sys_setresuid(), sys_setresgid(), sys_setfsuid(), and sys_setfsgid(). The ksys_ prefix denotes that these function are meant as a drop-in replacement for the syscall. In particular, they use the same calling convention. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02kernel: add do_getpgid() helper; remove internal call to sys_getpgid()Dominik Brodowski1-2/+7
Using the do_getpgid() helper removes an in-kernel call to the sys_getpgid() syscall. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2017-12-15fix typo in assignment of fs default overflow gidWolffhardt Schwabe1-1/+1
The patch remains without practical effect since both macros carry identical values. Still, it might become a problem in the future if (for whatever reason) the default overflow uid and gid differ. The DEFAULT_FS_OVERFLOWGID macro was previously unused. Signed-off-by: Wolffhardt Schwabe <wolffhardt.schwabe@fau.de> Signed-off-by: Anatoliy Cherepantsev <anatoliy.cherepantsev@fau.de> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2017-11-15Merge tag 'arm64-upstream' of ↵Linus Torvalds1-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "The big highlight is support for the Scalable Vector Extension (SVE) which required extensive ABI work to ensure we don't break existing applications by blowing away their signal stack with the rather large new vector context (<= 2 kbit per vector register). There's further work to be done optimising things like exception return, but the ABI is solid now. Much of the line count comes from some new PMU drivers we have, but they're pretty self-contained and I suspect we'll have more of them in future. Plenty of acronym soup here: - initial support for the Scalable Vector Extension (SVE) - improved handling for SError interrupts (required to handle RAS events) - enable GCC support for 128-bit integer types - remove kernel text addresses from backtraces and register dumps - use of WFE to implement long delay()s - ACPI IORT updates from Lorenzo Pieralisi - perf PMU driver for the Statistical Profiling Extension (SPE) - perf PMU driver for Hisilicon's system PMUs - misc cleanups and non-critical fixes" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (97 commits) arm64: Make ARMV8_DEPRECATED depend on SYSCTL arm64: Implement __lshrti3 library function arm64: support __int128 on gcc 5+ arm64/sve: Add documentation arm64/sve: Detect SVE and activate runtime support arm64/sve: KVM: Hide SVE from CPU features exposed to guests arm64/sve: KVM: Treat guest SVE use as undefined instruction execution arm64/sve: KVM: Prevent guests from using SVE arm64/sve: Add sysctl to set the default vector length for new processes arm64/sve: Add prctl controls for userspace vector length management arm64/sve: ptrace and ELF coredump support arm64/sve: Preserve SVE registers around EFI runtime service calls arm64/sve: Preserve SVE registers around kernel-mode NEON use arm64/sve: Probe SVE capabilities and usable vector lengths arm64: cpufeature: Move sys_caps_initialised declarations arm64/sve: Backend logic for setting the vector length arm64/sve: Signal handling support arm64/sve: Support vector length resetting for new processes arm64/sve: Core task context handling arm64/sve: Low-level CPU setup ...
2017-11-03arm64/sve: Add prctl controls for userspace vector length managementDave Martin1-0/+12
This patch adds two arm64-specific prctls, to permit userspace to control its vector length: * PR_SVE_SET_VL: set the thread's SVE vector length and vector length inheritance mode. * PR_SVE_GET_VL: get the same information. Although these prctls resemble instruction set features in the SVE architecture, they provide additional control: the vector length inheritance mode is Linux-specific and nothing to do with the architecture, and the architecture does not permit EL0 to set its own vector length directly. Both can be used in portable tools without requiring the use of SVE instructions. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alex Bennée <alex.bennee@linaro.org> [will: Fixed up prctl constants to avoid clash with PDEATHSIG] Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-20prctl: Allow local CAP_SYS_ADMIN changing exe_fileKirill Tkhai1-6/+2
During checkpointing and restore of userspace tasks we bumped into the situation, that it's not possible to restore the tasks, which user namespace does not have uid 0 or gid 0 mapped. People create user namespace mappings like they want, and there is no a limitation on obligatory uid and gid "must be mapped". So, if there is no uid 0 or gid 0 in the mapping, it's impossible to restore mm->exe_file of the processes belonging to this user namespace. Also, there is no a workaround. It's impossible to create a temporary uid/gid mapping, because only one write to /proc/[pid]/uid_map and gid_map is allowed during a namespace lifetime. If there is an entry, then no more mapings can't be written. If there isn't an entry, we can't write there too, otherwise user task won't be able to do that in the future. The patch changes the check, and looks for CAP_SYS_ADMIN instead of zero uid and gid. This allows to restore a task independently of its user namespace mappings. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Serge Hallyn <serge@hallyn.com> CC: "Eric W. Biederman" <ebiederm@xmission.com> CC: Oleg Nesterov <oleg@redhat.com> CC: Michal Hocko <mhocko@suse.com> CC: Andrei Vagin <avagin@openvz.org> CC: Cyrill Gorcunov <gorcunov@openvz.org> CC: Stanislav Kinsburskiy <skinsbursky@virtuozzo.com> CC: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2017-07-12fix a braino in compat_sys_getrlimit()Al Viro1-1/+1
Reported-and-tested-by: Meelis Roos <mroos@linux.ee> Fixes: commit d9e968cb9f84 "getrlimit()/setrlimit(): move compat to native" Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-11mm: make PR_SET_THP_DISABLE immediately activeMichal Hocko1-3/+3
PR_SET_THP_DISABLE has a rather subtle semantic. It doesn't affect any existing mapping because it only updated mm->def_flags which is a template for new mappings. The mappings created after prctl(PR_SET_THP_DISABLE) have VM_NOHUGEPAGE flag set. This can be quite surprising for all those applications which do not do prctl(); fork() & exec() and want to control their own THP behavior. Another usecase when the immediate semantic of the prctl might be useful is a combination of pre- and post-copy migration of containers with CRIU. In this case CRIU populates a part of a memory region with data that was saved during the pre-copy stage. Afterwards, the region is registered with userfaultfd and CRIU expects to get page faults for the parts of the region that were not yet populated. However, khugepaged collapses the pages and the expected page faults do not occur. In more general case, the prctl(PR_SET_THP_DISABLE) could be used as a temporary mechanism for enabling/disabling THP process wide. Implementation wise, a new MMF_DISABLE_THP flag is added. This flag is tested when decision whether to use huge pages is taken either during page fault of at the time of THP collapse. It should be noted, that the new implementation makes PR_SET_THP_DISABLE master override to any per-VMA setting, which was not the case previously. Fixes: a0715cc22601 ("mm, thp: add VM_INIT_DEF_MASK and PRCTL_THP_DISABLE") Link: http://lkml.kernel.org/r/1496415802-30944-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-07Merge branch 'misc.compat' of ↵Linus Torvalds1-1/+99
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc compat stuff updates from Al Viro: "This part is basically untangling various compat stuff. Compat syscalls moved to their native counterparts, getting rid of quite a bit of double-copying and/or set_fs() uses. A lot of field-by-field copyin/copyout killed off. - kernel/compat.c is much closer to containing just the copyin/copyout of compat structs. Not all compat syscalls are gone from it yet, but it's getting there. - ipc/compat_mq.c killed off completely. - block/compat_ioctl.c cleaned up; floppy compat ioctls moved to drivers/block/floppy.c where they belong. Yes, there are several drivers that implement some of the same ioctls. Some are m68k and one is 32bit-only pmac. drivers/block/floppy.c is the only one in that bunch that can be built on biarch" * 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: mqueue: move compat syscalls to native ones usbdevfs: get rid of field-by-field copyin compat_hdio_ioctl: get rid of set_fs() take floppy compat ioctls to sodding floppy.c ipmi: get rid of field-by-field __get_user() ipmi: get COMPAT_IPMICTL_RECEIVE_MSG in sync with the native one rt_sigtimedwait(): move compat to native select: switch compat_{get,put}_fd_set() to compat_{get,put}_bitmap() put_compat_rusage(): switch to copy_to_user() sigpending(): move compat to native getrlimit()/setrlimit(): move compat to native times(2): move compat to native compat_{get,put}_bitmap(): use unsafe_{get,put}_user() fb_get_fscreeninfo(): don't bother with do_fb_ioctl() do_sigaltstack(): lift copying to/from userland into callers take compat_sys_old_getrlimit() to native syscall trim __ARCH_WANT_SYS_OLD_GETRLIMIT
2017-06-10getrlimit()/setrlimit(): move compat to nativeAl Viro1-0/+48
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-10times(2): move compat to nativeAl Viro1-1/+27
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-27take compat_sys_old_getrlimit() to native syscallAl Viro1-0/+24
... and sanitize the ifdefs in there Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-21wait4(2)/waitid(2): separate copying rusage to userlandAl Viro1-10/+6
New helpers: kernel_waitid() and kernel_wait4(). sys_waitid(), sys_wait4() and their compat variants switched to those. Copying struct rusage to userland is left to syscall itself. For compat_sys_wait4() that eliminates the use of set_fs() completely. For compat_sys_waitid() it's still needed (for siginfo handling); that will change shortly. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-05Merge branch 'for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull namespace updates from Eric Biederman: "This is a set of small fixes that were mostly stumbled over during more significant development. This proc fix and the fix to posix-timers are the most significant of the lot. There is a lot of good development going on but unfortunately it didn't quite make the merge window" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: proc: Fix unbalanced hard link numbers signal: Make kill_proc_info static rlimit: Properly call security_task_setrlimit signal: Remove unused definition of sig_user_definied ia64: Remove unused IA64_TASK_SIGHAND_OFFSET and IA64_SIGHAND_SIGLOCK_OFFSET ipc: Remove unused declaration of recompute_msgmni posix-timers: Correct sanity check in posix_cpu_nsleep sysctl: Remove dead register_sysctl_root
2017-04-22rlimit: Properly call security_task_setrlimitEric W. Biederman1-2/+1
Modify do_prlimit to call security_task_setrlimit passing the task whose rlimit we are changing not the tsk->group_leader. In general this should not matter as the lsms implementing security_task_setrlimit apparmor and selinux both examine the task->cred to see what should be allowed on the destination task. That task->cred is shared between tasks created with CLONE_THREAD unless thread keyrings are in play, in which case both apparmor and selinux create duplicate security contexts. So the only time when it will matter which thread is passed to security_task_setrlimit is if one of the threads of a process performs an operation that changes only it's credentials. At which point if a thread has done that we don't want to hide that information from the lsms. So fix the call of security_task_setrlimit. With the removal of tsk->group_leader this makes the code slightly faster, more comprehensible and maintainable. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-03-06prlimit,security,selinux: add a security hook for prlimitStephen Smalley1-12/+18
When SELinux was first added to the kernel, a process could only get and set its own resource limits via getrlimit(2) and setrlimit(2), so no MAC checks were required for those operations, and thus no security hooks were defined for them. Later, SELinux introduced a hook for setlimit(2) with a check if the hard limit was being changed in order to be able to rely on the hard limit value as a safe reset point upon context transitions. Later on, when prlimit(2) was added to the kernel with the ability to get or set resource limits (hard or soft) of another process, LSM/SELinux was not updated other than to pass the target process to the setrlimit hook. This resulted in incomplete control over both getting and setting the resource limits of another process. Add a new security_task_prlimit() hook to the check_prlimit_permission() function to provide complete mediation. The hook is only called when acting on another task, and only if the existing DAC/capability checks would allow access. Pass flags down to the hook to indicate whether the prlimit(2) call will read, write, or both read and write the resource limits of the target process. The existing security_task_setrlimit() hook is left alone; it continues to serve a purpose in supporting the ability to make decisions based on the old and/or new resource limit values when setting limits. This is consistent with the DAC/capability logic, where check_prlimit_permission() performs generic DAC/capability checks for acting on another task, while do_prlimit() performs a capability check based on a comparison of the old and new resource limits. Fix the inline documentation for the hook to match the code. Implement the new hook for SELinux. For setting resource limits, we reuse the existing setrlimit permission. Note that this does overload the setrlimit permission to mean the ability to set the resource limit (soft or hard) of another process or the ability to change one's own hard limit. For getting resource limits, a new getrlimit permission is defined. This was not originally defined since getrlimit(2) could only be used to obtain a process' own limits. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-03-02sched/headers: Prepare to move cputime functionality from <linux/sched.h> ↵Ingo Molnar1-0/+1
into <linux/sched/cputime.h> Introduce a trivial, mostly empty <linux/sched/cputime.h> header to prepare for the moving of cputime functionality out of sched.h. Update all code that relies on these facilities. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/task.h> We are going to split <linux/sched/task.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/stat.h> We are going to split <linux/sched/stat.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/stat.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/coredump.h> We are going to split <linux/sched/coredump.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/coredump.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-12 06:55:45 +0300