| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit 84676c1f21 ("genirq/affinity: assign vectors to all possible CPUs")
tried to spread the interrupts accross all possible CPUs to make sure that
in case of phsyical hotplug (e.g. virtualization) the CPUs which get
plugged in after the device was initialized are targeted by a hardware
queue and the corresponding interrupt.
This has a downside in cases where the ACPI tables claim that there are
more possible CPUs than present CPUs and the number of interrupts to spread
out is smaller than the number of possible CPUs. These bogus ACPI tables
are unfortunately not uncommon.
In such a case the vector spreading algorithm assigns interrupts to CPUs
which can never be utilized and as a consequence these interrupts are
unused instead of being mapped to present CPUs. As a result the performance
of the device is suboptimal.
To fix this spread the interrupt vectors in two stages:
1) Spread as many interrupts as possible among the present CPUs
2) Spread the remaining vectors among non present CPUs
On a 8 core system, where CPU 0-3 are present and CPU 4-7 are not present,
for a device with 4 queues the resulting interrupt affinity is:
1) Before 84676c1f21 ("genirq/affinity: assign vectors to all possible CPUs")
irq 39, cpu list 0
irq 40, cpu list 1
irq 41, cpu list 2
irq 42, cpu list 3
2) With 84676c1f21 ("genirq/affinity: assign vectors to all possible CPUs")
irq 39, cpu list 0-2
irq 40, cpu list 3-4,6
irq 41, cpu list 5
irq 42, cpu list 7
3) With the refined vector spread applied:
irq 39, cpu list 0,4
irq 40, cpu list 1,6
irq 41, cpu list 2,5
irq 42, cpu list 3,7
On a 8 core system, where all CPUs are present the resulting interrupt
affinity for the 4 queues is:
irq 39, cpu list 0,1
irq 40, cpu list 2,3
irq 41, cpu list 4,5
irq 42, cpu list 6,7
This is independent of the number of CPUs which are online at the point of
initialization because in such a system the offline CPUs can be easily
onlined afterwards, while in non-present CPUs need to be plugged physically
or virtually which requires external interaction.
The downside of this approach is that in case of physical hotplug the
interrupt vector spreading might be suboptimal when CPUs 4-7 are physically
plugged. Suboptimal from a NUMA point of view and due to the single target
nature of interrupt affinities the later plugged CPUs might not be targeted
by interrupts at all.
Though, physical hotplug systems are not the common case while the broken
ACPI table disease is wide spread. So it's preferred to have as many
interrupts as possible utilized at the point where the device is
initialized.
Block multi-queue devices like NVME create a hardware queue per possible
CPU, so the goal of commit 84676c1f21 to assign one interrupt vector per
possible CPU is still achieved even with physical/virtual hotplug.
[ tglx: Changed from online to present CPUs for the first spreading stage,
renamed variables for readability sake, added comments and massaged
changelog ]
Reported-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Link: https://lkml.kernel.org/r/20180308105358.1506-5-ming.lei@redhat.com
|
|
To support two stage irq vector spreading, it's required to add a starting
point to the spreading function. No functional change, just preparatory
work for the actual two stage change.
[ tglx: Renamed variables, tidied up the code and massaged changelog ]
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Link: https://lkml.kernel.org/r/20180308105358.1506-4-ming.lei@redhat.com
|
|
No functional change, just prepare for converting to 2-stage irq vector
spreading.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Link: https://lkml.kernel.org/r/20180308105358.1506-3-ming.lei@redhat.com
|
|
The following patches will introduce two stage irq spreading for improving
irq spread on all possible CPUs.
No functional change.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Link: https://lkml.kernel.org/r/20180308105358.1506-2-ming.lei@redhat.com
|
|
When the allocation of node_to_possible_cpumask fails, then
irq_create_affinity_masks() returns with a pointer to the empty affinity
masks array, which will cause malfunction.
Reorder the allocations so the masks array allocation comes last and every
failure path returns NULL.
Fixes: 9a0ef98e186d ("genirq/affinity: Assign vectors to all present CPUs")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
|
|
These config switches enable the same code in the core and the not yet
converted architecture code. They can be selected both by randconfig builds
and cause linker error because the same symbols are defined twice.
Make the new GENERIC_IRQ_MULTI_HANDLER depend on !MULTI_IRQ_HANDLER to
prevent that. The dependency will be removed once all architectures are
converted over.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20180404043130.31277-4-palmer@sifive.com
|
|
Now that SPDX identifiers are in place, remove the boilerplate or
references.
The change in timings.c has been acked by the author.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Link: https://lkml.kernel.org/r/20180314212030.668321222@linutronix.de
|
|
Add SPDX identifiers to files
- which contain an explicit license boiler plate or reference
- which do not contain a license reference and were not updated in the
initial SPDX conversion because the license was deduced by the scanners
via EXPORT_SYMBOL_GPL as GPL2.0 only.
[ tglx: Moved adding identifiers from the patch which removes the
references/boilerplate ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Link: https://lkml.kernel.org/r/20180314212030.668321222@linutronix.de
|
|
Use the proper SPDX-Identifier format.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Link: https://lkml.kernel.org/r/20180314212030.492674761@linutronix.de
|
|
Remove pointless references to the file name itself and condense the
information so it wastes less space.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Link: https://lkml.kernel.org/r/20180314212030.412095827@linutronix.de
|
|
Given that irq_to_desc() is a radix_tree_lookup and the reverse
operation is only a pointer dereference and that all callers of
__free_irq already have the desc, pass the desc instead of the irq
number.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel@pengutronix.de
Link: https://lkml.kernel.org/r/20180319105202.9794-1-u.kleine-koenig@pengutronix.de
|
|
The arm multi irq handler registration mechanism has been copied into a
handful of architectures, including arm64 and openrisc. RISC-V needs the
same mechanism.
Instead of adding yet another copy for RISC-V copy the arm implementation
into the core code depending on a new Kconfig symbol:
CONFIG_GENERIC_MULTI_IRQ_HANDLER.
Subsequent patches will convert the various architectures.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: jonas@southpole.se
Cc: catalin.marinas@arm.com
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux@armlinux.org.uk
Cc: stefan.kristiansson@saunalahti.fi
Cc: openrisc@lists.librecores.org
Cc: shorne@gmail.com
Cc: linux-riscv@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lkml.kernel.org/r/20180307235731.22627-2-palmer@sifive.com
|
|
|
|
Returning the base of the allocated interrupt range from irq_sim_init() and
devm_irq_sim_init() allows users to handle the logic of associating irq
numbers with any other driver-specific resources without having to use
irq_sim_irqnum().
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20180304121018.640-4-brgl@bgdev.pl
|
|
As discussed with Marc Zyngier: irq_sim_init() and its devres variant
should return the base of the allocated interrupt range on success rather
than 0.
Make devm_irq_sim_init() check for an error code. This is a preparatory
change for modifying irq_sim_init() itself.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20180304121018.640-3-brgl@bgdev.pl
|
|
kfree() is used in the irq_sim code but slab.h is pulled in indirectly via
irq.h. Include it explicitly.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20180304121018.640-2-brgl@bgdev.pl
|
|
Surprisingly there is no simple way to see if the IRQ line in question
is wakeup source or not.
Note that wakeup might be an OOB (out-of-band) source like GPIO line
which makes things slightly more complicated.
Add a sysfs node to cover this case.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tony Lindgren <tony@atomide.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20180226155043.67937-1-andriy.shevchenko@linux.intel.com
|
|
At CPU hotunplug the corresponding per cpu matrix allocator is shut down and
the allocated interrupt bits are discarded under the assumption that all
allocated bits have been either migrated away or shut down through the
managed interrupts mechanism.
This is not true because interrupts which are not started up might have a
vector allocated on the outgoing CPU. When the interrupt is started up
later or completely shutdown and freed then the allocated vector is handed
back, triggering warnings or causing accounting issues which result in
suspend failures and other issues.
Change the CPU hotplug mechanism of the matrix allocator so that the
remaining allocations at unplug time are preserved and global accounting at
hotplug is correctly readjusted to take the dormant vectors into account.
Fixes: 2f75d9e1c905 ("genirq: Implement bitmap matrix allocator")
Reported-by: Yuriy Vostrikov <delamonpansie@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Yuriy Vostrikov <delamonpansie@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180222112316.849980972@linutronix.de
|
|
In case of threaded interrupts the thread follows the affinity setting of
the hard interrupt. The related function uses the affinity mask which was
set by either from user space or via one of the kernel mechanisms. This
mask can be wider than the resulting effective affinity of the hard
interrupt. As a consequence the thread might become affine to a completely
different CPU.
Use the effective interrupt affinity if the architecture supports it, so
the hard interrupt and the thread stay on the same CPU.
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
...instead of open coding file operations followed by custom ->open()
callbacks per each attribute.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
The file was converted from print_symbol() to %pf some time ago in
commit ef26f20cd117 ("genirq: Print threaded handler in spurious debug
output"). kallsyms does not seem to be needed anymore.
Link: http://lkml.kernel.org/r/20171208025616.16267-10-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Two small changes:
- a fix for a interrupt regression caused by the vector management
changes in 4.15 affecting museum pieces which rely on interrupt
probing for legacy (e.g. parallel port) devices.
One of the startup calls in the autoprobe code was not changed to
the new activate_and_startup() function resulting in a warning and
as a consequence failing to discover the device interrupt.
- a trivial update to the copyright/license header of the STM32 irq
chip driver"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Make legacy autoprobing work again
irqchip/stm32: Fix copyright
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Add a console_msg_format command line option:
The value "default" keeps the old "[time stamp] text\n" format. The
value "syslog" allows to see the syslog-like "<log
level>[timestamp] text" format.
This feature was requested by people doing regression tests, for
example, 0day robot. They want to have both filtered and full logs
at hands.
- Reduce the risk of softlockup:
Pass the console owner in a busy loop.
This is a new approach to the old problem. It was first proposed by
Steven Rostedt on Kernel Summit 2017. It marks a context in which
the console_lock owner calls console drivers and could not sleep.
On the other side, printk() callers could detect this state and use
a busy wait instead of a simple console_trylock(). Finally, the
console_lock owner checks if there is a busy waiter at the end of
the special context and eventually passes the console_lock to the
waiter.
The hand-off works surprisingly well and helps in many situations.
Well, there is still a possibility of the softlockup, for example,
when the flood of messages stops and the last owner still has too
much to flush.
There is increasing number of people having problems with
printk-related softlockups. We might eventually need to get better
solution. Anyway, this looks like a good start and promising
direction.
- Do not allow to schedule in console_unlock() called from printk():
This reverts an older controversial commit. The reschedule helped
to avoid softlockups. But it also slowed down the console output.
This patch is obsoleted by the new console waiter logic described
above. In fact, the reschedule made the hand-off less effective.
- Deprecate "%pf" and "%pF" format specifier:
It was needed on ia64, ppc64 and parisc64 to dereference function
descriptors and show the real function address. It is done
transparently by "%ps" and "pS" format specifier now.
Sergey Senozhatsky found that all the function descriptors were in
a special elf section and could be easily detected.
- Remove printk_symbol() API:
It has been obsoleted by "%pS" format specifier, and this change
helped to remove few continuous lines and a less intuitive old API.
- Remove redundant memsets:
Sergey removed unnecessary memset when processing printk.devkmsg
command line option.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (27 commits)
printk: drop redundant devkmsg_log_str memsets
printk: Never set console_may_schedule in console_trylock()
printk: Hide console waiter logic into helpers
printk: Add console owner and waiter logic to load balance console writes
kallsyms: remove print_symbol() function
checkpatch: add pF/pf deprecation warning
symbol lookup: introduce dereference_symbol_descriptor()
parisc64: Add .opd based function descriptor dereference
powerpc64: Add .opd based function descriptor dereference
ia64: Add .opd based function descriptor dereference
sections: split dereference_function_descriptor()
openrisc: Fix conflicting types for _exext and _stext
lib: do not use print_symbol()
irq debug: do not use print_symbol()
sysfs: do not use print_symbol()
drivers: do not use print_symbol()
x86: do not use print_symbol()
unicore32: do not use print_symbol()
sh: do not use print_symbol()
mn10300: do not use print_symbol()
...
|
|
Meelis reported the following warning on a quad P3 HP NetServer museum piece:
WARNING: CPU: 3 PID: 258 at kernel/irq/chip.c:244 __irq_startup+0x80/0x100
EIP: __irq_startup+0x80/0x100
irq_startup+0x7e/0x170
probe_irq_on+0x128/0x2b0
parport_irq_probe.constprop.18+0x8d/0x1af [parport_pc]
parport_pc_probe_port+0xf11/0x1260 [parport_pc]
parport_pc_init+0x78a/0xf10 [parport_pc]
parport_parse_param.constprop.16+0xf0/0xf0 [parport_pc]
do_one_initcall+0x45/0x1e0
This is caused by the rewrite of the irq activation/startup sequence which
missed to convert a callsite in the irq legacy auto probing code.
To fix this irq_activate_and_startup() needs to gain a return value so the
pending logic can work proper.
Fixes: c942cee46bba ("genirq: Separate activation and startup")
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Meelis Roos <mroos@linux.ee>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801301935410.1797@nanos
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"A rather small set of irq updates this time:
- removal of the old and now obsolete irq domain debugging code
- the new Goldfish PIC driver
- the usual pile of small fixes and updates"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqdomain: Kill CONFIG_IRQ_DOMAIN_DEBUG
irq/work: Improve the flag definitions
irqchip/gic-v3: Fix the driver probe() fail due to disabled GICC entry
irqchip/irq-goldfish-pic: Add Goldfish PIC driver
dt-bindings/goldfish-pic: Add device tree binding for Goldfish PIC driver
irqchip/ompic: fix return value check in ompic_of_init()
dt-bindings/bcm283x: Define polarity of per-cpu interrupts
irqchip/irq-bcm2836: Add support for DT interrupt polarity
dt-bindings/bcm2836-l1-intc: Add interrupt polarity support
|
|
Pull block updates from Jens Axboe:
"This is the main pull request for block IO related changes for the
4.16 kernel. Nothing major in this pull request, but a good amount of
improvements and fixes all over the map. This contains:
- BFQ improvements, fixes, and cleanups from Angelo, Chiara, and
Paolo.
- Support for SMR zones for deadline and mq-deadline from Damien and
Christoph.
- Set of fixes for bcache by way of Michael Lyle, including fixes
from himself, Kent, Rui, Tang, and Coly.
- Series from Matias for lightnvm with fixes from Hans Holmberg,
Javier, and Matias. Mostly centered around pblk, and the removing
rrpc 1.2 in preparation for supporting 2.0.
- A couple of NVMe pull requests from Christoph. Nothing major in
here, just fixes and cleanups, and support for command tracing from
Johannes.
- Support for blk-throttle for tracking reads and writes separately.
From Joseph Qi. A few cleanups/fixes also for blk-throttle from
Weiping.
- Series from Mike Snitzer that enables dm to register its queue more
logically, something that's alwways been problematic on dm since
it's a stacked device.
- Series from Ming cleaning up some of the bio accessor use, in
preparation for supporting multipage bvecs.
- Various fixes from Ming closing up holes around queue mapping and
quiescing.
- BSD partition fix from Richard Narron, fixing a problem where we
can't mount newer (10/11) FreeBSD partitions.
- Series from Tejun reworking blk-mq timeout handling. The previous
scheme relied on atomic bits, but it had races where we would think
a request had timed out if it to reused at the wrong time.
- null_blk now supports faking timeouts, to enable us to better
exercise and test that functionality separately. From me.
- Kill the separate atomic poll bit in the request struct. After
this, we don't use the atomic bits on blk-mq anymore at all. From
me.
- sgl_alloc/free helpers from Bart.
- Heavily contended tag case scalability improvement from me.
- Various little fixes and cleanups from Arnd, Bart, Corentin,
Douglas, Eryu, Goldwyn, and myself"
* 'for-4.16/block' of git://git.kernel.dk/linux-block: (186 commits)
block: remove smart1,2.h
nvme: add tracepoint for nvme_complete_rq
nvme: add tracepoint for nvme_setup_cmd
nvme-pci: introduce RECONNECTING state to mark initializing procedure
nvme-rdma: remove redundant boolean for inline_data
nvme: don't free uuid pointer before printing it
nvme-pci: Suspend queues after deleting them
bsg: use pr_debug instead of hand crafted macros
blk-mq-debugfs: don't allow write on attributes with seq_operations set
nvme-pci: Fix queue double allocations
block: Set BIO_TRACE_COMPLETION on new bio during split
blk-throttle: use queue_is_rq_based
block: Remove kblockd_schedule_delayed_work{,_on}()
blk-mq: Avoid that blk_mq_delay_run_hw_queue() introduces unintended delays
blk-mq: Rename blk_mq_request_direct_issue() into blk_mq_request_issue_directly()
lib/scatterlist: Fix chaining support in sgl_alloc_order()
blk-throttle: track read and write request individually
block: add bdev_read_only() checks to common helpers
block: fail op_is_write() requests to read-only partitions
blk-throttle: export io_serviced_recursive, io_service_bytes_recursive
...
|
|
CONFIG_IRQ_DOMAIN_DEBUG is similar to CONFIG_GENERIC_IRQ_DEBUGFS,
just with less information.
Spring cleanup time.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Yang Shunyong <shunyong.yang@hxt-semitech.com>
Link: https://lkml.kernel.org/r/20180117142647.23622-1-marc.zyngier@arm.com
|
|
Keith reported an issue with vector space exhaustion on a server machine
which is caused by the i40e driver allocating 168 MSI interrupts when the
driver is initialized, even when most of these interrupts are not used at
all.
The x86 vector allocation code tries to avoid the immediate allocation with
the reservation mode, but the card uses MSI and does not support MSI entry
masking, which prevents reservation mode and requires immediate vector
allocation.
The matrix allocator is a bit naive and prefers the first CPU in the
cpumask which describes the possible target CPUs for an allocation. That
results in allocating all 168 vectors on CPU0 which later causes vector
space exhaustion when the NVMe driver tries to allocate managed interrupts
on each CPU for the per CPU queues.
Avoid this by finding the CPU which has the lowest vector allocation count
to spread out the non managed interrupt accross the possible target CPUs.
Fixes: 2f75d9e1c905 ("genirq: Implement bitmap matrix allocator")
Reported-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Keith Busch <keith.busch@intel.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801171557330.1777@nanos
|
|
Currently we assign managed interrupt vectors to all present CPUs. This
works fine for systems were we only online/offline CPUs. But in case of
systems that support physical CPU hotplug (or the virtualized version of
it) this means the additional CPUs covered for in the ACPI tables or on
the command line are not catered for. To fix this we'd either need to
introduce new hotplug CPU states just for this case, or we can start
assining vectors to possible but not present CPUs.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Fixes: 4b855ad37194 ("blk-mq: Create hctx for each present CPU")
Cc: linux-kernel@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
print_symbol() is a very old API that has been obsoleted by %pS format
specifier in a normal printk() call.
Replace print_symbol() with a direct printk("%pS") call and avoid
using continuous lines.
Link: http://lkml.kernel.org/r/20171212073453.21455-1-sergey.senozhatsky@gmail.com
To: Andrew Morton <akpm@linux-foundation.org>
To: Russell King <linux@armlinux.org.uk>
To: Catalin Marinas <catalin.marinas@arm.com>
To: Mark Salter <msalter@redhat.com>
To: Tony Luck <tony.luck@intel.com>
To: David Howells <dhowells@redhat.com>
To: Yoshinori Sato <ysato@users.sourceforge.jp>
To: Guan Xuetao <gxt@mprc.pku.edu.cn>
To: Borislav Petkov <bp@alien8.de>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: Thomas Gleixner <tglx@linutronix.de>
To: Peter Zijlstra <peterz@infradead.org>
To: Vineet Gupta <vgupta@synopsys.com>
To: Fengguang Wu <fengguang.wu@intel.com>
To: David Laight <David.Laight@ACULAB.COM>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-am33-list@redhat.com
Cc: linux-sh@vger.kernel.org
Cc: linux-edac@vger.kernel.org
Cc: x86@kernel.org
Cc: linux-snps-arc@lists.infradead.org
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
[pmladek@suse.com: updated commit message]
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
The new reservation mode for interrupts assigns a dummy vector when the
interrupt is allocated and assigns a real vector when the interrupt is
requested. The reservation mode prevents vector pressure when devices with
a large amount of queues/interrupts are initialized, but only a minimal
subset of those queues/interrupts is actually used.
This mode has an issue with MSI interrupts which cannot be masked. If the
driver is not careful or the hardware emits an interrupt before the device
irq is requestd by the driver then the interrupt ends up on the dummy
vector as a spurious interrupt which can cause malfunction of the device or
in the worst case a lockup of the machine.
Change the logic for the reservation mode so that the early activation of
MSI interrupts checks whether:
- the device is a PCI/MSI device
- the reservation mode of the underlying irqdomain is activated
- PCI/MSI masking is globally enabled
- the PCI/MSI device uses either MSI-X, which supports masking, or
MSI with the maskbit supported.
If one of those conditions is false, then clear the reservation mode flag
in the irq data of the interrupt and invoke irq_domain_activate_irq() with
the reserve argument cleared. In the x86 vector code, clear the can_reserve
flag in the vector allocation data so a subsequent free_irq() won't create
the same situation again. The interrupt stays assigned to a real vector
until pci_disable_msi() is invoked and all allocations are undone.
Fixes: 4900be83602b ("x86/vector/msi: Switch to global reservation mode")
Reported-by: Alexandru Chirvasitu <achirvasub@gmail.com>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexandru Chirvasitu <achirvasub@gmail.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Mikael Pettersson <mikpelinux@gmail.com>
Cc: Josh Poulson <jopoulso@microsoft.com>
Cc: Mihai Costache <v-micos@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-pci@vger.kernel.org
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Simon Xiao <sixiao@microsoft.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Jork Loeser <Jork.Loeser@microsoft.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: devel@linuxdriverproject.org
Cc: KY Srinivasan <kys@microsoft.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Sakari Ailus <sakari.ailus@intel.com>,
Cc: linux-media@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712291406420.1899@nanos
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712291409460.1899@nanos
|
|
The 'early' argument of irq_domain_activate_irq() is actually used to
denote reservation mode. To avoid confusion, rename it before abuse
happens.
No functional change.
Fixes: 72491643469a ("genirq/irqdomain: Update irq_domain_ops.activate() signature")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexandru Chirvasitu <achirvasub@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Mikael Pettersson <mikpelinux@gmail.com>
Cc: Josh Poulson <jopoulso@microsoft.com>
Cc: Mihai Costache <v-micos@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-pci@vger.kernel.org
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Simon Xiao <sixiao@microsoft.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Jork Loeser <Jork.Loeser@microsoft.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: devel@linuxdriverproject.org
Cc: KY Srinivasan <kys@microsoft.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Sakari Ailus <sakari.ailus@intel.com>,
Cc: linux-media@vger.kernel.org
|
|
Add a new flag to mark interrupts which can use reservation mode. This is
going to be used in subsequent patches to disable reservation mode for a
certain class of MSI devices.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexandru Chirvasitu <achirvasub@gmail.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Mikael Pettersson <mikpelinux@gmail.com>
Cc: Josh Poulson <jopoulso@microsoft.com>
Cc: Mihai Costache <v-micos@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-pci@vger.kernel.org
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Simon Xiao <sixiao@microsoft.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Jork Loeser <Jork.Loeser@microsoft.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: devel@linuxdriverproject.org
Cc: KY Srinivasan <kys@microsoft.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Sakari Ailus <sakari.ailus@intel.com>,
Cc: linux-media@vger.kernel.org
|
|
When analyzing the fallout of the x86 vector allocation rework it turned
out that the error handling in msi_domain_alloc_irqs() is broken.
If MSI_FLAG_MUST_REACTIVATE is set for a MSI domain then it clears the
activation flag for a successfully initialized msi descriptor. If a
subsequent initialization fails then the error handling code path does not
deactivate the interrupt because the activation flag got cleared.
Move the clearing of the activation flag outside of the initialization loop
so that an eventual failure can be cleaned up correctly.
Fixes: 22d0b12f3560 ("genirq/irqdomain: Add force reactivation flag to irq domains")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexandru Chirvasitu <achirvasub@gmail.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Mikael Pettersson <mikpelinux@gmail.com>
Cc: Josh Poulson <jopoulso@microsoft.com>
Cc: Mihai Costache <v-micos@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-pci@vger.kernel.org
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Simon Xiao <sixiao@microsoft.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Jork Loeser <Jork.Loeser@microsoft.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: devel@linuxdriverproject.org
Cc: KY Srinivasan <kys@microsoft.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Sakari Ailus <sakari.ailus@intel.com>,
Cc: linux-media@vger.kernel.org
|
|
An interrupt storm on a bad interrupt will cause the kernel
log to be clogged.
[ 60.089234] ->handle_irq(): ffffffffbe2f803f,
[ 60.090455] 0xffffffffbf2af380
[ 60.090510] handle_bad_irq+0x0/0x2e5
[ 60.090522] ->irq_data.chip(): ffffffffbf2af380,
[ 60.090553] IRQ_NOPROBE set
[ 60.090584] ->handle_irq(): ffffffffbe2f803f,
[ 60.090590] handle_bad_irq+0x0/0x2e5
[ 60.090596] ->irq_data.chip(): ffffffffbf2af380,
[ 60.090602] 0xffffffffbf2af380
[ 60.090608] ->action(): (null)
[ 60.090779] handle_bad_irq+0x0/0x2e5
This was seen when running an upstream kernel on Acer Chromebook R11. The
system was unstable as result.
Guard the log message with __printk_ratelimit to reduce the impact. This
won't prevent the interrupt storm from happening, but at least the system
remains stable.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dtor@chromium.org>
Cc: Joe Perches <joe@perches.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197953
Link: https://lkml.kernel.org/r/1512234784-21038-1-git-send-email-linux@roeck-us.net
|
|
The IRQ code already has support for lockdep class for the lock mutex
in an interrupt descriptor. Extend this to add a second class for the
request mutex in the descriptor. Not having a class is resulting in
false positive splats in some code paths.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: linus.walleij@linaro.org
Cc: grygorii.strashko@ti.com
Cc: f.fainelli@gmail.com
Link: https://lkml.kernel.org/r/1512234664-21555-1-git-send-email-andrew@lunn.ch
|
|
The previous commit which made the operator precedence in
irq_matrix_available() explicit made the implicit brokenness explicitely
wrong. It was wrong in the original commit already. The overworked
maintainer did not notice it either when merging the patch.
Replace the confusing '?' construct by a simple and obvious if ().
Fixes: 75f1133873d6 ("genirq/matrix: Make - vs ?: Precedence explicit")
Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Glexiner:
- unbreak the irq trigger type check for legacy platforms
- a handful fixes for ARM GIC v3/4 interrupt controllers
- a few trivial fixes all over the place
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/matrix: Make - vs ?: Precedence explicit
irqchip/imgpdc: Use resource_size function on resource object
irqchip/qcom: Fix u32 comparison with value less than zero
irqchip/exiu: Fix return value check in exiu_init()
irqchip/gic-v3-its: Remove artificial dependency on PCI
irqchip/gic-v4: Add forward definition of struct irq_domain_ops
irqchip/gic-v3: pr_err() strings should end with newlines
irqchip/s3c24xx: pr_err() strings should end with newlines
irqchip/gic-v3: Fix ppi-partitions lookup
irqchip/gic-v4: Clear IRQ_DISABLE_UNLAZY again if mapping fails
genirq: Track whether the trigger type has been set
|
|
Noticed with a Clang build. This improves the readability of the ?:
expression, as it has lower precedence than the - expression. Show
explicitly that - is evaluated first.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20171122205645.GA27125@beast
|
|
This changes all DEFINE_TIMER() callbacks to use a struct timer_list
pointer instead of unsigned long. Since the data argument has already been
removed, none of these callbacks are using their argument currently, so
this renames the argument to "unused".
Done using the following semantic patch:
@match_define_timer@
declarer name DEFINE_TIMER;
identifier _timer, _callback;
@@
DEFINE_TIMER(_timer, _callback);
@change_callback depends on match_define_timer@
identifier match_define_timer._callback;
type _origtype;
identifier _origarg;
@@
void
-_callback(_origtype _origarg)
+_callback(struct timer_list *unused)
{ ... }
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The big highlight is support for the Scalable Vector Extension (SVE)
which required extensive ABI work to ensure we don't break existing
applications by blowing away their signal stack with the rather large
new vector context (<= 2 kbit per vector register). There's further
work to be done optimising things like exception return, but the ABI
is solid now.
Much of the line count comes from some new PMU drivers we have, but
they're pretty self-contained and I suspect we'll have more of them in
future.
Plenty of acronym soup here:
- initial support for the Scalable Vector Extension (SVE)
- improved handling for SError interrupts (required to handle RAS
events)
- enable GCC support for 128-bit integer types
- remove kernel text addresses from backtraces and register dumps
- use of WFE to implement long delay()s
- ACPI IORT updates from Lorenzo Pieralisi
- perf PMU driver for the Statistical Profiling Extension (SPE)
- perf PMU driver for Hisilicon's system PMUs
- misc cleanups and non-critical fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (97 commits)
arm64: Make ARMV8_DEPRECATED depend on SYSCTL
arm64: Implement __lshrti3 library function
arm64: support __int128 on gcc 5+
arm64/sve: Add documentation
arm64/sve: Detect SVE and activate runtime support
arm64/sve: KVM: Hide SVE from CPU features exposed to guests
arm64/sve: KVM: Treat guest SVE use as undefined instruction execution
arm64/sve: KVM: Prevent guests from using SVE
arm64/sve: Add sysctl to set the default vector length for new processes
arm64/sve: Add prctl controls for userspace vector length management
arm64/sve: ptrace and ELF coredump support
arm64/sve: Preserve SVE registers around EFI runtime service calls
arm64/sve: Preserve SVE registers around kernel-mode NEON use
arm64/sve: Probe SVE capabilities and usable vector lengths
arm64: cpufeature: Move sys_caps_initialised declarations
arm64/sve: Backend logic for setting the vector length
arm64/sve: Signal handling support
arm64/sve: Support vector length resetting for new processes
arm64/sve: Core task context handling
arm64/sve: Low-level CPU setup
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip updates for 4.15, take #4 from Marc Zyngier
- A core irq fix for legacy cases where the irq trigger is not reported
by firmware
- A couple of GICv3/4 fixes (Kconfig, of-node refcount, error handling)
- Trivial pr_err fixes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC updates from Thomas Gleixner:
"This update provides a major overhaul of the APIC initialization and
vector allocation code:
- Unification of the APIC and interrupt mode setup which was
scattered all over the place and was hard to follow. This also
distangles the timer setup from the APIC initialization which
brings a clear separation of functionality.
Great detective work from Dou Lyiang!
- Refactoring of the x86 vector allocation mechanism. The existing
code was based on nested loops and rather convoluted APIC callbacks
which had a horrible worst case behaviour and tried to serve all
different use cases in one go. This led to quite odd hacks when
supporting the new managed interupt facility for multiqueue devices
and made it more or less impossible to deal with the vector space
exhaustion which was a major roadblock for server hibernation.
Aside of that the code dealing with cpu hotplug and the system
vectors was disconnected from the actual vector management and
allocation code, which made it hard to follow and maintain.
Utilizing the new bitmap matrix allocator core mechanism, the new
allocator and management code consolidates the handling of system
vectors, legacy vectors, cpu hotplug mechanisms and the actual
allocation which needs to be aware of system and legacy vectors and
hotplug constraints into a single consistent entity.
This has one visible change: The support for multi CPU targets of
interrupts, which is only available on a certain subset of
CPUs/APIC variants has been removed in favour of single interrupt
targets. A proper analysis of the multi CPU target feature revealed
that there is no real advantage as the vast majority of interrupts
end up on the CPU with the lowest APIC id in the set of target CPUs
anyway. That change was agreed on by the relevant folks and allowed
to simplify the implementation significantly and to replace rather
fragile constructs like the vector cleanup IPI with straight
forward and solid code.
Furthermore this allowed to cleanly separate the allocation details
for legacy, normal and managed interrupts:
* Legacy interrupts are not longer wasting 16 vectors
unconditionally
* Managed interrupts have now a guaranteed vector reservation, but
the actual vector assignment happens when the interrupt is
requested. It's guaranteed not to fail.
* Normal interrupts no longer allocate vectors unconditionally
when the interrupt is set up (IO/APIC init or MSI(X) enable).
The mechanism has been switched to a best effort reservation
mode. The actual allocation happens when the interrupt is
requested. Contrary to managed interrupts the request can fail
due to vector space exhaustion, but drivers must handle a fail
of request_irq() anyway. When the interrupt is freed, the vector
is handed back as well.
This solves a long standing problem with large unconditional
vector allocations for a certain class of enterprise devices
which prevented server hibernation due to vector space
exhaustion when the unused allocated vectors had to be migrated
to CPU0 while unplugging all non boot CPUs.
The code has been equipped with trace points and detailed debugfs
information to aid analysis of the vector space"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
x86/vector/msi: Select CONFIG_GENERIC_IRQ_RESERVATION_MODE
PCI/MSI: Set MSI_FLAG_MUST_REACTIVATE in core code
genirq: Add config option for reservation mode
x86/vector: Use correct per cpu variable in free_moved_vector()
x86/apic/vector: Ignore set_affinity call for inactive interrupts
x86/apic: Fix spelling mistake: "symmectic" -> "symmetric"
x86/apic: Use dead_cpu instead of current CPU when cleaning up
ACPI/init: Invoke early ACPI initialization earlier
x86/vector: Respect affinity mask in irq descriptor
x86/irq: Simplify hotplug vector accounting
x86/vector: Switch IOAPIC to global reservation mode
x86/vector/msi: Switch to global reservation mode
x86/vector: Handle managed interrupts proper
x86/io_apic: Reevaluate vector configuration on activate()
iommu/amd: Reevaluate vector configuration on activate()
iommu/vt-d: Reevaluate vector configuration on activate()
x86/apic/msi: Force reactivation of interrupts at startup time
x86/vector: Untangle internal state from irq_cfg
x86/vector: Compile SMP only code conditionally
x86/apic: Remove unused callbacks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Yet another big pile of changes:
- More year 2038 work from Arnd slowly reaching the point where we
need to think about the syscalls themself.
- A new timer function which allows to conditionally (re)arm a timer
only when it's either not running or the new expiry time is sooner
than the armed expiry time. This allows to use a single timer for
multiple timeout requirements w/o caring about the first expiry
time at the call site.
- A new NMI safe accessor to clock real time for the printk timestamp
work. Can be used by tracing, perf as well if required.
- A large number of timer setup conversions from Kees which got
collected here because either maintainers requested so or they
simply got ignored. As Kees pointed out already there are a few
trivial merge conflicts and some redundant commits which was
unavoidable due to the size of this conversion effort.
- Avoid a redundant iteration in the timer wheel softirq processing.
- Provide a mechanism to treat RTC implementations depending on their
hardware properties, i.e. don't inflict the write at the 0.5
seconds boundary which originates from the PC CMOS RTC to all RTCs.
No functional change as drivers need to be updated separately.
- The usual small updates to core code clocksource drivers. Nothing
really exciting"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
timers: Add a function to start/reduce a timer
pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
timer: Prepare to change all DEFINE_TIMER() callbacks
netfilter: ipvs: Convert timers to use timer_setup()
scsi: qla2xxx: Convert timers to use timer_setup()
block/aoe: discover_timer: Convert timers to use timer_setup()
ide: Convert timers to use timer_setup()
drbd: Convert timers to use timer_setup()
mailbox: Convert timers to use timer_setup()
crypto: Convert timers to use timer_setup()
drivers/pcmcia: omap1: Fix error in automated timer conversion
ARM: footbridge: Fix typo in timer conversion
drivers/sgi-xp: Convert timers to use timer_setup()
drivers/pcmcia: Convert timers to use timer_setup()
drivers/memstick: Convert timers to use timer_setup()
drivers/macintosh: Convert timers to use timer_setup()
hwrng/xgene-rng: Convert timers to use timer_setup()
auxdisplay: Convert timers to use timer_setup()
sparc/led: Convert timers to use timer_setup()
mips: ip22/32: Convert timers to use timer_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq core updates from Thomas Gleixner:
"A rather large update for the interrupt core code and the irq chip drivers:
- Add a new bitmap matrix allocator and supporting changes, which is
used to replace the x86 vector allocator which comes with separate
pull request. This allows to replace the convoluted nested loop
allocation function in x86 with a facility which supports the
recently added property of managed interrupts proper and allows to
switch to a best effort vector reservation scheme, which addresses
problems with vector exhaustion.
- A large update to the ARM GIC-V3-ITS driver adding support for
range selectors.
- New interrupt controllers:
- Meson and Meson8 GPIO
- BCM7271 L2
- Socionext EXIU
If you expected that this will stop at some point, I have to
disappoint you. There are new ones posted already. Sigh!
- STM32 interrupt controller support for new platforms.
- A pile of fixes, cleanups and updates to the MIPS GIC driver
- The usual small fixes, cleanups and updates all over the place.
Most visible one is to move the irq chip drivers Kconfig switches
into a separate Kconfig menu"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
genirq: Fix type of shifting literal 1 in __setup_irq()
irqdomain: Drop pointless NULL check in virq_debug_show_one
genirq/proc: Return proper error code when irq_set_affinity() fails
irq/work: Use llist_for_each_entry_safe
irqchip: mips-gic: Print warning if inherited GIC base is used
irqchip/mips-gic: Add pr_fmt and reword pr_* messages
irqchip/stm32: Move the wakeup on interrupt mask
irqchip/stm32: Fix initial values
irqchip/stm32: Add stm32h7 support
dt-bindings/interrupt-controllers: Add compatible string for stm32h7
irqchip/stm32: Add multi-bank management
irqchip/stm32: Select GENERIC_IRQ_CHIP
irqchip/exiu: Add support for Socionext Synquacer EXIU controller
dt-bindings: Add description of Socionext EXIU interrupt controller
irqchip/gic-v3-its: Fix VPE activate callback return value
irqchip: mips-gic: Make IPI bitmaps static
irqchip: mips-gic: Share register writes in gic_set_type()
irqchip: mips-gic: Remove gic_vpes variable
irqchip: mips-gic: Use num_possible_cpus() to reserve IPIs
irqchip: mips-gic: Configure EIC when CPUs come online
...
|
|
If ffz() ever returns a value >= 31 then the following shift is undefined
behaviour because the literal 1 which gets shifted is treated as signed
integer.
In practice, the bug is probably harmless, since the first undefined shift
count is 31 which results - ignoring UB - in (int)(0x80000000). This gets
sign extended so bit 32-63 will be set as well and all subsequent
__setup_irq() calls would just end up hitting the -EBUSY branch.
However, a sufficiently aggressive optimizer may use the UB of 1<<31
to decide that doesn't happen, and hence elide the sign-extension
code, so that subsequent calls can indeed get ffz > 31.
In any case, the right thing to do is to make the literal 1UL.
[ tglx: For this to happen a single interrupt would have to be shared by 32
devices. Hardware like that does not exist and would have way more
problems than that. ]
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20171030213548.16831-1-linux@rasmusvillemoes.dk
|
|
data has been already derefenced unconditionally, so it's pointless to do a
NULL pointer check on it afterwards. Drop it.
[ tglx: Depersonify changelog. ]
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20171112212904.28574-1-linux@rasmusvillemoes.dk
|
|
write_irq_affinity() returns the number of written bytes, which means
success, unconditionally whether the actual irq_set_affinity() call
succeeded or not.
Add proper error handling and pass the error code returned from
irq_set_affinity() back to user space in case of failure.
[ tglx: Fixed coding style and massaged changelog ]
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Cc: zhong.weidong@zte.com.cn
Link: https://lkml.kernel.org/r/1510106103-184761-1-git-send-email-wen.yang99@zte.com.cn
|
|
When requesting a shared interrupt, we assume that the firmware
support code (DT or ACPI) has called irqd_set_trigger_type
already, so that we can retrieve it and check that the requester
is being reasonnable.
Unfortunately, we still have non-DT, non-ACPI systems around,
and these guys won't call irqd_set_trigger_type before requesting
the interrupt. The consequence is that we fail the request that
would have worked before.
We can either chase all these use cases (boring), or address it
in core code (easier). Let's have a per-irq_desc flag that
indicates whether irqd_set_trigger_type has been called, and
let's just check it when checking for a shared interrupt.
If it hasn't been set, just take whatever the interrupt
requester asks.
Fixes: 382bd4de6182 ("genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs")
Cc: stable@vger.kernel.org
Reported-and-tested-by: Petr Cvek <petrcvekcz@gmail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Use lockdep to check that IRQs are enabled or disabled as expected. This
way the sanity check only shows overhead when concurrency correctness
debug code is enabled.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David S . Miller <davem@davemloft.net>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1509980490-4285-10-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
