| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This reverts commit 757055ae8dedf5333af17b3b5b4b70ba9bc9da4e.
The commit caused that ttynull was used as the default console
on several systems[1][2][3]. As a result, the console was
blank even when a better alternative existed.
It happened when there was no console configured
on the command line and ttynull_init() was the first initcall
calling register_console().
Or it happened when /dev/ did not exist when console_on_rootfs()
was called. It was not able to open /dev/console even though
a console driver was registered. It tried to add ttynull console
but it obviously did not help. But ttynull became the preferred
console and was used by /dev/console when it was available later.
The commit tried to fix a historical problem that have been there
for ages. The primary motivation was the commit 3cffa06aeef7ece30f6
("printk/console: Allow to disable console output by using console=""
or console=null"). It provided a clean solution for a workaround
that was widely used and worked only by chance.
This revert causes that the console="" or console=null command line
options will again work only by chance. These options will cause that
a particular console will be preferred and the default (tty) ones
will not get enabled. There will be no console registered at
all. As a result there won't be stdin, stdout, and stderr for
the init process. But it worked exactly this way even before.
The proper solution has to fulfill many conditions:
+ Register ttynull only when explicitly required or as
the ultimate fallback.
+ ttynull should get associated with /dev/console but it must
not become preferred console when used as a fallback.
Especially, it must still be possible to replace it
by a better console later.
Such a change requires clean up of the register_console() code.
Otherwise, it would be even harder to follow. Especially, the use
of has_preferred_console and CON_CONSDEV flag is tricky. The clean
up is risky. The ordering of consoles is not well defined. And
any changes tend to break existing user settings.
Do the revert at the least risky solution for now.
[1] https://lore.kernel.org/linux-kselftest/20201221144302.GR4077@smile.fi.intel.com/
[2] https://lore.kernel.org/lkml/d2a3b3c0-e548-7dd1-730f-59bc5c04e191@synopsys.com/
[3] https://patchwork.ozlabs.org/project/linux-um/patch/20210105120128.10854-1-thomas@m3y3r.de/
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: Vineet Gupta <vgupta@synopsys.com>
Reported-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fix from Paul McKenney:
"This is a fix for a regression in the v5.10 merge window, but it was
reported quite late in the v5.10 process, plus generating and testing
the fix took some time.
The regression is due to commit 36dadef23fcc ("kprobes: Init kprobes
in early_initcall") which on powerpc can use RCU Tasks before
initialization, resulting in boot failures.
The fix is straightforward, simply moving initialization of RCU Tasks
before the early_initcall()s. The fix has been exposed to -next and
kbuild test robot testing, and has been tested by the PowerPC guys"
* 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
rcu-tasks: Move RCU-tasks initialization to before early_initcall()
|
|
This is a preparatory commit for the upcoming addition of a new hardware
tag-based (MTE-based) KASAN mode.
Hardware tag-based KASAN won't use kasan_depth. Only define and use it
when one of the software KASAN modes are enabled.
No functional changes for software modes.
Link: https://lkml.kernel.org/r/e16f15aeda90bc7fb4dfc2e243a14b74cc5c8219.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull block updates from Jens Axboe:
"Another series of killing more code than what is being added, again
thanks to Christoph's relentless cleanups and tech debt tackling.
This contains:
- blk-iocost improvements (Baolin Wang)
- part0 iostat fix (Jeffle Xu)
- Disable iopoll for split bios (Jeffle Xu)
- block tracepoint cleanups (Christoph Hellwig)
- Merging of struct block_device and hd_struct (Christoph Hellwig)
- Rework/cleanup of how block device sizes are updated (Christoph
Hellwig)
- Simplification of gendisk lookup and removal of block device
aliasing (Christoph Hellwig)
- Block device ioctl cleanups (Christoph Hellwig)
- Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig)
- Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig)
- sbitmap improvements (Pavel Begunkov)
- Hybrid polling fix (Pavel Begunkov)
- bvec iteration improvements (Pavel Begunkov)
- Zone revalidation fixes (Damien Le Moal)
- blk-throttle limit fix (Yu Kuai)
- Various little fixes"
* tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits)
blk-mq: fix msec comment from micro to milli seconds
blk-mq: update arg in comment of blk_mq_map_queue
blk-mq: add helper allocating tagset->tags
Revert "block: Fix a lockdep complaint triggered by request queue flushing"
nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class
blk-mq: add new API of blk_mq_hctx_set_fq_lock_class
block: disable iopoll for split bio
block: Improve blk_revalidate_disk_zones() checks
sbitmap: simplify wrap check
sbitmap: replace CAS with atomic and
sbitmap: remove swap_lock
sbitmap: optimise sbitmap_deferred_clear()
blk-mq: skip hybrid polling if iopoll doesn't spin
blk-iocost: Factor out the base vrate change into a separate function
blk-iocost: Factor out the active iocgs' state check into a separate function
blk-iocost: Move the usage ratio calculation to the correct place
blk-iocost: Remove unnecessary advance declaration
blk-iocost: Fix some typos in comments
blktrace: fix up a kerneldoc comment
block: remove the request_queue to argument request based tracepoints
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Finally allow parallel writes and reads into/from the lockless
ringbuffer. But it is not a complete solution. Readers are still
serialized against each other. And nested writes are still prevented
by printk_safe per-CPU buffers.
- Use ttynull as the ultimate fallback for /dev/console.
- Officially allow disabling console output by using console="" or
console=null
- A few code cleanups
* tag 'printk-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: remove logbuf_lock writer-protection of ringbuffer
printk: inline log_output(),log_store() in vprintk_store()
printk: remove obsolete dead assignment
printk/console: Allow to disable console output by using console="" or console=null
init/console: Use ttynull as a fallback when there is no console
printk: ringbuffer: Reference text_data_ring directly in callees.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull exec-update-lock update from Eric Biederman:
"The key point of this is to transform exec_update_mutex into a
rw_semaphore so readers can be separated from writers.
This makes it easier to understand what the holders of the lock are
doing, and makes it harder to contend or deadlock on the lock.
The real deadlock fix wound up in perf_event_open"
* 'exec-update-lock-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
exec: Transform exec_update_mutex into a rw_semaphore
|
|
Merge misc updates from Andrew Morton:
- a few random little subsystems
- almost all of the MM patches which are staged ahead of linux-next
material. I'll trickle to post-linux-next work in as the dependents
get merged up.
Subsystems affected by this patch series: kthread, kbuild, ide, ntfs,
ocfs2, arch, and mm (slab-generic, slab, slub, dax, debug, pagecache,
gup, swap, shmem, memcg, pagemap, mremap, hmm, vmalloc, documentation,
kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction,
oom-kill, migration, cma, page-poison, userfaultfd, zswap, zsmalloc,
uaccess, zram, and cleanups).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (200 commits)
mm: cleanup kstrto*() usage
mm: fix fall-through warnings for Clang
mm: slub: convert sysfs sprintf family to sysfs_emit/sysfs_emit_at
mm: shmem: convert shmem_enabled_show to use sysfs_emit_at
mm:backing-dev: use sysfs_emit in macro defining functions
mm: huge_memory: convert remaining use of sprintf to sysfs_emit and neatening
mm: use sysfs_emit for struct kobject * uses
mm: fix kernel-doc markups
zram: break the strict dependency from lzo
zram: add stat to gather incompressible pages since zram set up
zram: support page writeback
mm/process_vm_access: remove redundant initialization of iov_r
mm/zsmalloc.c: rework the list_add code in insert_zspage()
mm/zswap: move to use crypto_acomp API for hardware acceleration
mm/zswap: fix passing zero to 'PTR_ERR' warning
mm/zswap: make struct kernel_param_ops definitions const
userfaultfd/selftests: hint the test runner on required privilege
userfaultfd/selftests: fix retval check for userfaultfd_open()
userfaultfd/selftests: always dump something in modes
userfaultfd: selftests: make __{s,u}64 format specifiers portable
...
|
|
init_on_alloc/free parameters
Patch series "cleanup page poisoning", v3.
I have identified a number of issues and opportunities for cleanup with
CONFIG_PAGE_POISON and friends:
- interaction with init_on_alloc and init_on_free parameters depends on
the order of parameters (Patch 1)
- the boot time enabling uses static key, but inefficienty (Patch 2)
- sanity checking is incompatible with hibernation (Patch 3)
- CONFIG_PAGE_POISONING_NO_SANITY can be removed now that we have
init_on_free (Patch 4)
- CONFIG_PAGE_POISONING_ZERO can be most likely removed now that we
have init_on_free (Patch 5)
This patch (of 5):
Enabling page_poison=1 together with init_on_alloc=1 or init_on_free=1
produces a warning in dmesg that page_poison takes precedence. However,
as these warnings are printed in early_param handlers for
init_on_alloc/free, they are not printed if page_poison is enabled later
on the command line (handlers are called in the order of their
parameters), or when init_on_alloc/free is always enabled by the
respective config option - before the page_poison early param handler is
called, it is not considered to be enabled. This is inconsistent.
We can remove the dependency on order by making the init_on_* parameters
only set a boolean variable, and postponing the evaluation after all early
params have been processed. Introduce a new
init_mem_debugging_and_hardening() function for that, and move the related
debug_pagealloc processing there as well.
As a result init_mem_debugging_and_hardening() knows always accurately if
init_on_* and/or page_poison options were enabled. Thus we can also
optimize want_init_on_alloc() and want_init_on_free(). We don't need to
check page_poisoning_enabled() there, we can instead not enable the
init_on_* static keys at all, if page poisoning is enabled. This results
in a simpler and more effective code.
Link: https://lkml.kernel.org/r/20201113104033.22907-1-vbabka@suse.cz
Link: https://lkml.kernel.org/r/20201113104033.22907-2-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mateusz Nosek <mateusznosek0@gmail.com>
Cc: Laura Abbott <labbott@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In the booting phase if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set,
we have following callchain:
start_kernel
...
mm_init
mem_init
memblock_free_all
reset_all_zones_managed_pages
free_low_memory_core_early
...
buffer_init
nr_free_buffer_pages
zone->managed_pages
...
rest_init
kernel_init
kernel_init_freeable
page_alloc_init_late
kthread_run(deferred_init_memmap, NODE_DATA(nid), "pgdatinit%d", nid);
wait_for_completion(&pgdat_init_all_done_comp);
...
files_maxfiles_init
It's clear that buffer_init depends on zone->managed_pages, but it's reset
in reset_all_zones_managed_pages after that pages are readded into
zone->managed_pages, but when buffer_init runs this process is half done
and most of them will finally be added till deferred_init_memmap done. In
large memory couting of nr_free_buffer_pages drifts too much, also
drifting from kernels to kernels on same hardware.
Fix is simple, it delays buffer_init run till deferred_init_memmap all
done.
But as corrected by this patch, max_buffer_heads becomes very large, the
value is roughly as many as 4 times of totalram_pages, formula:
max_buffer_heads = nrpages * (10%) * (PAGE_SIZE / sizeof(struct
buffer_head));
Say in a 64GB memory box we have 16777216 pages, then max_buffer_heads
turns out to be roughly 67,108,864. In common cases, should a buffer_head
be mapped to one page/block(4KB)? So max_buffer_heads never exceeds
totalram_pages. IMO it's likely to make buffer_heads_over_limit bool
value alwasy false, then make codes 'if (buffer_heads_over_limit)' test in
vmscan unnecessary.
So this patch will change the original behavior related to
buffer_heads_over_limit in vmscan since we used a half done value of
zone->managed_pages before, or should we use a smaller factor(<10%) in
previous formula.
akpm: I think this is OK - the max_buffer_heads code is only needed on
highmem machines, to prevent ZONE_NORMAL from being consumed by large
amounts of buffer_heads attached to highmem pagecache. This problem will
not occur on 64-bit machines, so this feature's non-functionality on such
machines is a feature, not a bug.
Link: https://lkml.kernel.org/r/20201123110500.103523-1-linf@wangsu.com
Signed-off-by: Lin Feng <linf@wangsu.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Page owner of pages used by page owner itself used is missing on arm32
targets. The reason is dummy_handle and failure_handle is not initialized
correctly. Buddy allocator is used to initialize these two handles.
However, buddy allocator is not ready when page owner calls it. This
change fixed that by initializing page owner after buddy initialization.
The working flow before and after this change are:
original logic:
1. allocated memory for page_ext(using memblock).
2. invoke the init callback of page_ext_ops like page_owner(using buddy
allocator).
3. initialize buddy.
after this change:
1. allocated memory for page_ext(using memblock).
2. initialize buddy.
3. invoke the init callback of page_ext_ops like page_owner(using buddy
allocator).
with the change, failure/dummy_handle can get its correct value and page
owner output for example has the one for page owner itself:
Page allocated via order 2, mask 0x6202c0(GFP_USER|__GFP_NOWARN), pid 1006, ts 67278156558 ns
PFN 543776 type Unmovable Block 531 type Unmovable Flags 0x0()
init_page_owner+0x28/0x2f8
invoke_init_callbacks_flatmem+0x24/0x34
start_kernel+0x33c/0x5d8
Link: https://lkml.kernel.org/r/1603104925-5888-1-git-send-email-zhenhuah@codeaurora.org
Signed-off-by: Zhenhua Huang <zhenhuah@codeaurora.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull misc fixes from Christian Brauner:
"This contains several fixes which felt worth being combined into a
single branch:
- Use put_nsproxy() instead of open-coding it switch_task_namespaces()
- Kirill's work to unify lifecycle management for all namespaces. The
lifetime counters are used identically for all namespaces types.
Namespaces may of course have additional unrelated counters and
these are not altered. This work allows us to unify the type of the
counters and reduces maintenance cost by moving the counter in one
place and indicating that basic lifetime management is identical
for all namespaces.
- Peilin's fix adding three byte padding to Dmitry's
PTRACE_GET_SYSCALL_INFO uapi struct to prevent an info leak.
- Two smal patches to convert from the /* fall through */ comment
annotation to the fallthrough keyword annotation which I had taken
into my branch and into -next before df561f6688fe ("treewide: Use
fallthrough pseudo-keyword") made it upstream which fixed this
tree-wide.
Since I didn't want to invalidate all testing for other commits I
didn't rebase and kept them"
* tag 'fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
nsproxy: use put_nsproxy() in switch_task_namespaces()
sys: Convert to the new fallthrough notation
signal: Convert to the new fallthrough notation
time: Use generic ns_common::count
cgroup: Use generic ns_common::count
mnt: Use generic ns_common::count
user: Use generic ns_common::count
pid: Use generic ns_common::count
ipc: Use generic ns_common::count
uts: Use generic ns_common::count
net: Use generic ns_common::count
ns: Add a common refcount into ns_common
ptrace: Prevent kernel-infoleak in ptrace_get_syscall_info()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add support for the hugetlb_cma command line option to allocate
gigantic hugepages using CMA
- Add arch_get_random_long() support.
- Add ap bus userspace notifications.
- Increase default size of vmalloc area to 512GB and otherwise let it
increase dynamically by the size of physical memory. This should fix
all occurrences where the vmalloc area was not large enough.
- Completely get rid of set_fs() (aka select SET_FS) and rework address
space handling while doing that; making address space handling much
more simple.
- Reimplement getcpu vdso syscall in C.
- Add support for extended SCLP responses (> 4k). This allows e.g. to
handle also potential large system configurations.
- Simplify KASAN by removing 3-level page table support and only
supporting 4-levels from now on.
- Improve debug-ability of the kernel decompressor code, which now
prints also stack traces and symbols in case of problems to the
console.
- Remove more power management leftovers.
- Other various fixes and improvements all over the place.
* tag 's390-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (62 commits)
s390/mm: add support to allocate gigantic hugepages using CMA
s390/crypto: add arch_get_random_long() support
s390/smp: perform initial CPU reset also for SMT siblings
s390/mm: use invalid asce for user space when switching to init_mm
s390/idle: fix accounting with machine checks
s390/idle: add missing mt_cycles calculation
s390/boot: add build-id to decompressor
s390/kexec_file: fix diag308 subcode when loading crash kernel
s390/cio: fix use-after-free in ccw_device_destroy_console
s390/cio: remove pm support from ccw bus driver
s390/cio: remove pm support from css-bus driver
s390/cio: remove pm support from IO subchannel drivers
s390/cio: remove pm support from chsc subchannel driver
s390/vmur: remove unused pm related functions
s390/tape: remove unsupported PM functions
s390/cio: remove pm support from eadm-sch drivers
s390: remove pm support from console drivers
s390/dasd: remove unused pm related functions
s390/zfcp: remove pm support from zfcp driver
s390/ap: let bus_register() add the AP bus sysfs attributes
...
|
|
PowerPC testing encountered boot failures due to RCU Tasks not being
fully initialized until core_initcall() time. This commit therefore
initializes RCU Tasks (along with Rude RCU and RCU Tasks Trace) just
before early_initcall() time, thus allowing waiting on RCU Tasks grace
periods from early_initcall() handlers.
Link: https://lore.kernel.org/rcu/87eekfh80a.fsf@dja-thinkpad.axtens.net/
Fixes: 36dadef23fcc ("kprobes: Init kprobes in early_initcall")
Tested-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
|
|
There is only one function in init/initramfs.c that is in the .text
section, and it is marked __weak. When building with clang-12 and the
integrated assembler, this leads to a bug with recordmcount:
./scripts/recordmcount "init/initramfs.o"
Cannot find symbol for section 2: .text.
init/initramfs.o: failed
I'm not quite sure what exactly goes wrong, but I notice that this
function is only ever called from an __init function, and normally
inlined. Marking it __init as well is clearly correct and it leads to
recordmcount no longer complaining.
Link: https://lkml.kernel.org/r/20201204165742.3815221-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Barret Rhoden <brho@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Recently syzbot reported[0] that there is a deadlock amongst the users
of exec_update_mutex. The problematic lock ordering found by lockdep
was:
perf_event_open (exec_update_mutex -> ovl_i_mutex)
chown (ovl_i_mutex -> sb_writes)
sendfile (sb_writes -> p->lock)
by reading from a proc file and writing to overlayfs
proc_pid_syscall (p->lock -> exec_update_mutex)
While looking at possible solutions it occured to me that all of the
users and possible users involved only wanted to state of the given
process to remain the same. They are all readers. The only writer is
exec.
There is no reason for readers to block on each other. So fix
this deadlock by transforming exec_update_mutex into a rw_semaphore
named exec_update_lock that only exec takes for writing.
Cc: Jann Horn <jannh@google.com>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Bernd Edlinger <bernd.edlinger@hotmail.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christopher Yeoh <cyeoh@au1.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Fixes: eea9673250db ("exec: Add exec_update_mutex to replace cred_guard_mutex")
[0] https://lkml.kernel.org/r/00000000000063640c05ade8e3de@google.com
Reported-by: syzbot+db9cdf3dd1f64252c6ef@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/87ft4mbqen.fsf@x220.int.ebiederm.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Move -Wcast-align to W=3, which tends to be false-positive and there
is no tree-wide solution.
- Pass -fmacro-prefix-map to KBUILD_CPPFLAGS because it is a
preprocessor option and makes sense for .S files as well.
- Disable -gdwarf-2 for Clang's integrated assembler to avoid warnings.
- Disable --orphan-handling=warn for LLD 10.0.1 to avoid warnings.
- Fix undesirable line breaks in *.mod files.
* tag 'kbuild-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: avoid split lines in .mod files
kbuild: Disable CONFIG_LD_ORPHAN_WARN for ld.lld 10.0.1
kbuild: Hoist '--orphan-handling' into Kconfig
Kbuild: do not emit debug info for assembly with LLVM_IAS=1
kbuild: use -fmacro-prefix-map for .S sources
Makefile.extrawarn: move -Wcast-align to W=3
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull bootconfig fixes from Steven Rostedt:
"Have bootconfig size and checksum be little endian
In case the bootconfig is created on one kind of endian machine, and
then read on the other kind of endian kernel, the size and checksum
will be incorrect. Instead, have both the size and checksum always be
little endian and have the tool and the kernel convert it from little
endian to or from the host endian"
* tag 'trace-v5.10-rc6-bootconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
docs: bootconfig: Add the endianness of fields
tools/bootconfig: Store size and checksum in footer as le32
bootconfig: Load size and checksum in the footer as le32
|
|
Instead of having two structures that represent each block device with
different life time rules, merge them into a single one. This also
greatly simplifies the reference counting rules, as we can use the inode
reference count as the main reference count for the new struct
block_device, with the device model reference front ending it for device
model interaction.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just use the bd_partno field in struct block_device everywhere.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the partition_meta_info to struct block_device in preparation for
killing struct hd_struct.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Avoid a totally pointless goto label, and use the same style of
comparism for both helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The code in devt_from_partuuid is very convoluted. Refactor a bit by
sanitizing the goto and variable name usage.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Split each case into a self-contained helper, and move the block
dependent code entirely under the pre-existing #ifdef CONFIG_BLOCK.
This allows to remove the blk_lookup_devt stub in genhd.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ld.lld 10.0.1 spews a bunch of various warnings about .rela sections,
along with a few others. Newer versions of ld.lld do not have these
warnings. As a result, do not add '--orphan-handling=warn' to
LDFLAGS_vmlinux if ld.lld's version is not new enough.
Link: https://github.com/ClangBuiltLinux/linux/issues/1187
Link: https://github.com/ClangBuiltLinux/linux/issues/1193
Reported-by: Arvind Sankar <nivedita@alum.mit.edu>
Reported-by: kernelci.org bot <bot@kernelci.org>
Reported-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Currently, '--orphan-handling=warn' is spread out across four different
architectures in their respective Makefiles, which makes it a little
unruly to deal with in case it needs to be disabled for a specific
linker version (in this case, ld.lld 10.0.1).
To make it easier to control this, hoist this warning into Kconfig and
the main Makefile so that disabling it is simpler, as the warning will
only be enabled in a couple places (main Makefile and a couple of
compressed boot folders that blow away LDFLAGS_vmlinx) and making it
conditional is easier due to Kconfig syntax. One small additional
benefit of this is saving a call to ld-option on incremental builds
because we will have already evaluated it for CONFIG_LD_ORPHAN_WARN.
To keep the list of supported architectures the same, introduce
CONFIG_ARCH_WANT_LD_ORPHAN_WARN, which an architecture can select to
gain this automatically after all of the sections are specified and size
asserted. A special thanks to Kees Cook for the help text on this
config.
Link: https://github.com/ClangBuiltLinux/linux/issues/1187
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Load the size and the checksum fields in the footer as le32
instead of u32. This will allow us to apply bootconfig to the
cross build initrd without caring the endianness.
Link: https://lkml.kernel.org/r/160583934457.547349.10504070298990791074.stgit@devnote2
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fixes from Petr Mladek:
- do not lose trailing newline in pr_cont() calls
- two trivial fixes for a dead store and a config description
* tag 'printk-for-5.10-rc6-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: finalize records with trailing newlines
printk: remove unneeded dead-store assignment
init/Kconfig: Fix CPU number in LOG_CPU_MAX_BUF_SHIFT description
|
|
While allmodconfig and allyesconfig build for s390 there are also
various bots running compile tests with randconfig, where PCI is
disabled. This reveals that a lot of drivers should actually depend on
HAS_IOMEM.
Adding this to each device driver would be a never ending story,
therefore just disable COMPILE_TEST for s390.
The reasoning is more or less the same as described in
commit bc083a64b6c0 ("init/Kconfig: make COMPILE_TEST depend on !UML").
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
stdin, stdout, and stderr standard I/O stream are created for the init
process. They are not available when there is no console registered
for /dev/console. It might lead to a crash when the init process
tries to use them, see the commit 48021f98130880dd742 ("printk: handle
blank console arguments passed in.").
Normally, ttySX and ttyX consoles are used as a fallback when no consoles
are defined via the command line, device tree, or SPCR. But there
will be no console registered when an invalid console name is configured
or when the configured consoles do not exist on the system.
Users even try to avoid the console intentionally, for example,
by using console="" or console=null. It is used on production
systems where the serial port or terminal are not visible to
users. Pushing messages to these consoles would just unnecessary
slowdown the system.
Make sure that stdin, stdout, stderr, and /dev/console are always
available by a fallback to the existing ttynull driver. It has
been implemented for exactly this purpose but it was used only
when explicitly configured.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20201111135450.11214-2-pmladek@suse.com
|
|
Since Grub may align the size of initrd to 4 if user pass
initrd from cpio, we have to check the preceding 3 bytes as well.
Link: https://lkml.kernel.org/r/160520205132.303174.4876760192433315429.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 85c46b78da58 ("bootconfig: Add bootconfig magic word for indicating bootconfig explicitly")
Reported-by: Chen Yu <yu.chen.surf@gmail.com>
Tested-by: Chen Yu <yu.chen.surf@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Currently, LOG_BUF_SHIFT defaults to 17, which is 2 ^ 17 bytes = 128 KB,
and LOG_CPU_MAX_BUF_SHIFT defaults to 12, which is 2 ^ 12 bytes = 4 KB.
Half of 128 KB is 64 KB, so more than 16 CPUs are required for the value
to be used, as then the sum of contributions is greater than 64 KB for
the first time. My guess is, that the description was written with the
configuration values used in the SUSE in mind.
Fixes: 23b2899f7f194f06e ("printk: allow increasing the ring buffer depending on the number of CPUs")
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200811092924.6256-1-pmenzel@molgen.mpg.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull more Kunit updates from Shuah Khan:
- add Kunit to kernel_init() and remove KUnit from init calls entirely.
This addresses the concern that Kunit would not work correctly during
late init phase.
- add a linker section where KUnit can put references to its test
suites.
This is the first step in transitioning to dispatching all KUnit
tests from a centralized executor rather than having each as its own
separate late_initcall.
- add a centralized executor to dispatch tests rather than relying on
late_initcall to schedule each test suite separately. Centralized
execution is for built-in tests only; modules will execute tests when
loaded.
- convert bitfield test to use KUnit framework
- Documentation updates for naming guidelines and how
kunit_test_suite() works.
- add test plan to KUnit TAP format
* tag 'linux-kselftest-kunit-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
lib: kunit: Fix compilation test when using TEST_BIT_FIELD_COMPILE
lib: kunit: add bitfield test conversion to KUnit
Documentation: kunit: add a brief blurb about kunit_test_suite
kunit: test: add test plan to KUnit TAP format
init: main: add KUnit to kernel init
kunit: test: create a single centralized executor for all tests
vmlinux.lds.h: add linker section for KUnit test suites
Documentation: kunit: Add naming guidelines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).
- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.
- Allow more than 255 IPv4 multicast interfaces.
- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.
- Allow more calls to same peer in RxRPC.
- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.
- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
- Add TC actions for implementing MPLS L2 VPNs.
- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.
- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.
- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.
- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.
- Support sleepable BPF programs, initially targeting LSM and tracing.
- Add bpf_d_path() helper for returning full path for given 'struct
path'.
- Make bpf_tail_call compatible with bpf-to-bpf calls.
- Allow BPF programs to call map_update_elem on sockmaps.
- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
- Support listing and getting information about bpf_links via the bpf
syscall.
- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).
- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).
- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
- Add XDP support for Intel's igb driver.
- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.
- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.
- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial updates from Jiri Kosina:
"The latest advances in computer science from the trivial queue"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
xtensa: fix Kconfig typo
spelling.txt: Remove some duplicate entries
mtd: rawnand: oxnas: cleanup/simplify code
selftests: vm: add fragment CONFIG_GUP_BENCHMARK
perf: Fix opt help text for --no-bpf-event
HID: logitech-dj: Fix spelling in comment
bootconfig: Fix kernel message mentioning CONFIG_BOOT_CONFIG
MAINTAINERS: rectify MMP SUPPORT after moving cputype.h
scif: Fix spelling of EACCES
printk: fix global comment
lib/bitmap.c: fix spello
fs: Fix missing 'bit' in comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
"The big new thing is the fully lockless ringbuffer implementation,
including the support for continuous lines. It will allow to store and
read messages in any situation wihtout the risk of deadlocks and
without the need of temporary per-CPU buffers.
The access is still serialized by logbuf_lock. It synchronizes few
more operations, for example, temporary buffer for formatting the
message, syslog and kmsg_dump operations. The lock removal is being
discussed and should be ready for the next release.
The continuous lines are handled exactly the same way as before to
avoid regressions in user space. It means that they are appended to
the last message when the caller is the same. Only the last message
can be extended.
The data ring includes plain text of the messages. Except for an
integer at the beginning of each message that points back to the
descriptor ring with other metadata.
The dictionary has to stay. journalctl uses it to filter the log. It
allows to show messages related to a given device. The dictionary
values are stored in the descriptor ring with the other metadata.
This is the first part of the printk rework as discussed at Plumbers
2019, see https://lore.kernel.org/r/87k1acz5rx.fsf@linutronix.de. The
next big step will be handling consoles by kthreads during the normal
system operation. It will require special handling of situations when
the kthreads could not get scheduled, for example, early boot,
suspend, panic.
Other changes:
- Add John Ogness as a reviewer for printk subsystem. He is author of
the rework and is familiar with the code and history.
- Fix locking in serial8250_do_startup() to prevent lockdep report.
- Few code cleanups"
* tag 'printk-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (27 commits)
printk: Use fallthrough pseudo-keyword
printk: reduce setup_text_buf size to LOG_LINE_MAX
printk: avoid and/or handle record truncation
printk: remove dict ring
printk: move dictionary keys to dev_printk_info
printk: move printk_info into separate array
printk: reimplement log_cont using record extension
printk: ringbuffer: add finalization/extension support
printk: ringbuffer: change representation of states
printk: ringbuffer: clear initial reserved fields
printk: ringbuffer: add BLK_DATALESS() macro
printk: ringbuffer: relocate get_data()
printk: ringbuffer: avoid memcpy() on state_var
printk: ringbuffer: fix setting state in desc_read()
kernel.h: Move oops_in_progress to printk.h
scripts/gdb: update for lockless printk ringbuffer
scripts/gdb: add utils.read_ulong()
docs: vmcoreinfo: add lockless printk ringbuffer vmcoreinfo
printk: reduce LOG_BUF_SHIFT range for H8300
printk: ringbuffer: support dataless records
...
|
|
Pull io_uring updates from Jens Axboe:
- Add blkcg accounting for io-wq offload (Dennis)
- A use-after-free fix for io-wq (Hillf)
- Cancelation fixes and improvements
- Use proper files_struct references for offload
- Cleanup of io_uring_get_socket() since that can now go into our own
header
- SQPOLL fixes and cleanups, and support for sharing the thread
- Improvement to how page accounting is done for registered buffers and
huge pages, accounting the real pinned state
- Series cleaning up the xarray code (Willy)
- Various cleanups, refactoring, and improvements (Pavel)
- Use raw spinlock for io-wq (Sebastian)
- Add support for ring restrictions (Stefano)
* tag 'io_uring-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (62 commits)
io_uring: keep a pointer ref_node in file_data
io_uring: refactor *files_register()'s error paths
io_uring: clean file_data access in files_register
io_uring: don't delay io_init_req() error check
io_uring: clean leftovers after splitting issue
io_uring: remove timeout.list after hrtimer cancel
io_uring: use a separate struct for timeout_remove
io_uring: improve submit_state.ios_left accounting
io_uring: simplify io_file_get()
io_uring: kill extra check in fixed io_file_get()
io_uring: clean up ->files grabbing
io_uring: don't io_prep_async_work() linked reqs
io_uring: Convert advanced XArray uses to the normal API
io_uring: Fix XArray usage in io_uring_add_task_file
io_uring: Fix use of XArray in __io_uring_files_cancel
io_uring: fix break condition for __io_uring_register() waiting
io_uring: no need to call xa_destroy() on empty xarray
io_uring: batch account ->req_issue and task struct references
io_uring: kill callback_head argument for io_req_task_work_add()
io_uring: move req preps out of io_issue_sqe()
...
|
|
Pull documentation updates from Jonathan Corbet:
"As hoped, things calmed down for docs this cycle; fewer changes and
almost no conflicts at all. This includes:
- A reworked and expanded user-mode Linux document
- Some simplifications and improvements for submitting-patches.rst
- An emergency fix for (some) problems with Sphinx 3.x
- Some welcome automarkup improvements to automatically generate
cross-references to struct definitions and other documents
- The usual collection of translation updates, typo fixes, etc"
* tag 'docs-5.10' of git://git.lwn.net/linux: (81 commits)
gpiolib: Update indentation in driver.rst for code excerpts
Documentation/admin-guide: tainted-kernels: Fix typo occured
Documentation: better locations for sysfs-pci, sysfs-tagging
docs: programming-languages: refresh blurb on clang support
Documentation: kvm: fix a typo
Documentation: Chinese translation of Documentation/arm64/amu.rst
doc: zh_CN: index files in arm64 subdirectory
mailmap: add entry for <mstarovoitov@marvell.com>
doc: seq_file: clarify role of *pos in ->next()
docs: trace: ring-buffer-design.rst: use the new SPDX tag
Documentation: kernel-parameters: clarify "module." parameters
Fix references to nommu-mmap.rst
docs: rewrite admin-guide/sysctl/abi.rst
docs: fb: Remove vesafb scrollback boot option
docs: fb: Remove sstfb scrollback boot option
docs: fb: Remove matroxfb scrollback boot option
docs: fb: Remove framebuffer scrollback boot option
docs: replace the old User Mode Linux HowTo with a new one
Documentation/admin-guide: blockdev/ramdisk: remove use of "rdev"
Documentation/admin-guide: README & svga: remove use of "rdev"
...
|
|
|
|
Although we have not seen any actual examples where KUnit doesn't work
because it runs in the late init phase of the kernel, it has been a
concern for some time that this could potentially be an issue in the
future. So, remove KUnit from init calls entirely, instead call directly
from kernel_init() so that KUnit runs after late init.
Co-developed-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Grab actual references to the files_struct. To avoid circular references
issues due to this, we add a per-task note that keeps track of what
io_uring contexts a task has used. When the tasks execs or exits its
assigned files, we cancel requests based on this tracking.
With that, we can grab proper references to the files table, and no
longer need to rely on stashing away ring_fd and ring_file to check
if the ring_fd may have been closed.
Cc: stable@vger.kernel.org # v5.5+
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
nommu-mmap.rst was moved to Documentation/admin-guide/mm; this patch
updates the remaining stale references to Documentation/mm.
Fixes: 800c02f5d030 ("docs: move nommu-mmap.txt to admin-guide and rename to ReST")
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200812092230.27541-1-steve@sk2.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This eliminates the following sparse warning:
init/main.c:306:6: warning: symbol 'xbc_namebuf' was not declared.
Should it be static?
Link: https://lkml.kernel.org/r/20200915070324.2239473-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Since kprobe_event= cmdline option allows user to put kprobes on the
functions in initmem, kprobe has to make such probes gone after boot.
Currently the probes on the init functions in modules will be handled
by module callback, but the kernel init text isn't handled.
Without this, kprobes may access non-exist text area to disable or
remove it.
Link: https://lkml.kernel.org/r/159972810544.428528.1839307531600646955.stgit@devnote2
Fixes: 970988e19eb0 ("tracing/kprobe: Add kprobe_event= boot parameter")
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The .bss section for the h8300 is relatively small. A value of
CONFIG_LOG_BUF_SHIFT that is larger than 19 will create a static
printk ringbuffer that is too large. Limit the range appropriately
for the H8300.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200812073122.25412-1-john.ogness@linutronix.de
|
|
We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.
Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
init_stat() returns 0 on success, same as vfs_lstat(). When it replaced
vfs_lstat(), the '!' was dropped.
Fixes: 716308a5331b ("init: add an init_stat helper")
Signed-off-by: Barret Rhoden <brho@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix up one typo: CONFIG_BOOTCONFIG -> CONFIG_BOOT_CONFIG
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Introduce sleepable BPF programs that can request such property for themselves
via BPF_F_SLEEPABLE flag at program load time. In such case they will be able
to use helpers like bpf_copy_from_user() that might sleep. At present only
fentry/fexit/fmod_ret and lsm programs can request to be sleepable and only
when they are attached to kernel functions that are known to allow sleeping.
The non-sleepable programs are relying on implicit rcu_read_lock() and
migrate_disable() to protect life time of programs, maps that they use and
per-cpu kernel structures used to pass info between bpf programs and the
kernel. The sleepable programs cannot be enclosed into rcu_read_lock().
migrate_disable() maps to preempt_disable() in non-RT kernels, so the progs
should not be enclosed in migrate_disable() as well. Therefore
rcu_read_lock_trace is used to protect the life time of sleepable progs.
There are many networking and tracing program types. In many cases the
'struct bpf_prog *' pointer itself is rcu protected within some other kernel
data structure and the kernel code is using rcu_dereference() to load that
program pointer and call BPF_PROG_RUN() on it. All these cases are not touched.
Instead sleepable bpf programs are allowed with bpf trampoline only. The
program pointers are hard-coded into generated assembly of bpf trampoline and
synchronize_rcu_tasks_trace() is used to protect the life time of the program.
The same trampoline can hold both sleepable and non-sleepable progs.
When rcu_read_lock_trace is held it means that some sleepable bpf program is
running from bpf trampoline. Those programs can use bpf arrays and preallocated
hash/lru maps. These map types are waiting on programs to complete via
synchronize_rcu_tasks_trace();
Updates to trampoline now has to do synchronize_rcu_tasks_trace() and
synchronize_rcu_tasks() to wait for sleepable progs to finish and for
trampoline assembly to finish.
This is the first step of introducing sleepable progs. Eventually dynamically
allocated hash maps can be allowed and networking program types can become
sleepable too.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200827220114.69225-3-alexei.starovoitov@gmail.com
|
