| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
firmware: tegra: Changes for v6.15-rc1
Not much to this except for a simple typofix.
* tag 'tegra-for-6.15-firmware' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: bpmp: Fix typo in bpmp-abi.h
Link: https://lore.kernel.org/r/20250307162332.3451523-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
All the big Linux distros enable CONFIG_SCHED_DEBUG, because
the various features it provides help not just with kernel
development, but with system administration and user-space
software development as well.
Reflect this reality and enable this functionality
unconditionally.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250317104257.3496611-4-mingo@kernel.org
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New peripheral the sdhci controller on rk3528. Enablement of hdmi and hdmi
audio on a number of additional boards. Better handling for scmi shared
memory on rk3568 and a fix for the used SCMI clock ids on rk3576.
As well as some fixes that were a bit late for trying to stuff them into
6.14 at this late stage of the cycle.
* tag 'v6.15-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: remove ethm0_clk0_25m_out from Sige5 gmac0
arm64: dts: rockchip: Fix PWM pinctrl names
arm64: dts: rockchip: fix RK3576 SCMI clock IDs
dt-bindings: clock: rk3576: add SCMI clocks
arm64: dts: rockchip: Fix pcie reset gpio on Orange Pi 5 Max
arm64: dts: rockchip: Enable HDMI audio output for ArmSoM Sige7
arm64: dts: rockchip: Enable onboard eMMC on Radxa E20C
arm64: dts: rockchip: Add SDHCI controller for RK3528
arm64: dts: rockchip: Remove bluetooth node from rock-3a
arm64: dts: rockchip: Move rk356x scmi SHMEM to reserved memory
arm64: dts: rockchip: Add AP6275P wireless support to ArmSoM Sige7
arm64: dts: rockchip: Enable HDMI audio outputs for Orange Pi 5 Plus
arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Plus
arm64: dts: rockchip: Enable HDMI audio outputs for Orange Pi 5 Max
arm64: dts: rockchip: Enable HDMI0 audio output for Orange Pi 5/5B
Link: https://lore.kernel.org/r/23866869.6Emhk5qWAg@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/dt
arm64: ZynqMP DT changes for 6.15
- Align clock nodes with DT binding
- Add the first VN-X Versal NET board
- Move constants out of DT bindings
* tag 'zynqmp-dt-for-6.14' of https://github.com/Xilinx/linux-xlnx:
dt-bindings: xilinx: Deprecate header with firmware constants
arm64: zynqmp: Use DT header for firmware constants
arm64: versal-net: Add description for b2197-00 revA board
dt-bindings: soc: Add new VN-X board description based on Versal NET
arm64: zynqmp: add clock-output-names property in clock nodes
Link: https://lore.kernel.org/r/CAHTX3d+u1VmxP4vm0peQS-ST7o0BuCpKUPRVCSLMfAAb=eV3Xg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_event: Fix connection regression between LE and non-LE adapters
- Fix error code in chan_alloc_skb_cb()
* tag 'for-net-2025-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_event: Fix connection regression between LE and non-LE adapters
Bluetooth: Fix error code in chan_alloc_skb_cb()
====================
Link: https://patch.msgid.link/20250314163847.110069-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, netconsole has two methods of configuration - module
parameter and configfs. The former interface allows for netconsole
activation earlier during boot (by specifying the module parameter on
the kernel command line), so it is preferred for debugging issues which
arise before userspace is up/the configfs interface can be used. The
module parameter syntax requires specifying the egress interface name.
This requirement makes it hard to use for a couple reasons:
- The egress interface name can be hard or impossible to predict. For
example, installing a new network card in a system can change the
interface names assigned by the kernel.
- When constructing the module parameter, one may have trouble
determining the original (kernel-assigned) name of the interface
(which is the name that should be given to netconsole) if some stable
interface naming scheme is in effect. A human can usually look at
kernel logs to determine the original name, but this is very painful
if automation is constructing the parameter.
For these reasons, allow selection of the egress interface via MAC
address when configuring netconsole using the module parameter. Update
the netconsole documentation with an example of the new syntax.
Selection of egress interface by MAC address via configfs is far less
interesting (since when this interface can be used, one should be able
to easily convert between MAC address and interface name), so it is left
unimplemented.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Tested-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312-netconsole-v6-2-3437933e79b8@purestorage.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There are a few places in the tree which compute the length of the
string representation of a MAC address as 3 * ETH_ALEN - 1. Define a
constant for this and use it where relevant. No functionality changes
are expected.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@verge.net.au>
Link: https://patch.msgid.link/20250312-netconsole-v6-1-3437933e79b8@purestorage.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Lockdep complains about circular lock in 1 -> 2 -> 3 (see below).
Change the lock ordering to be:
- rtnl_lock
- dev_addr_sem
- netdev_ops (only for lower devices!)
- team_lock (or other per-upper device lock)
1. rtnl_lock -> netdev_ops -> dev_addr_sem
rtnl_setlink
rtnl_lock
do_setlink IFLA_ADDRESS on lower
netdev_ops
dev_addr_sem
2. rtnl_lock -> team_lock -> netdev_ops
rtnl_newlink
rtnl_lock
do_setlink IFLA_MASTER on lower
do_set_master
team_add_slave
team_lock
team_port_add
dev_set_mtu
netdev_ops
3. rtnl_lock -> dev_addr_sem -> team_lock
rtnl_newlink
rtnl_lock
do_setlink IFLA_ADDRESS on upper
dev_addr_sem
netif_set_mac_address
team_set_mac_address
team_lock
4. rtnl_lock -> netdev_ops -> dev_addr_sem
rtnl_lock
dev_ifsioc
dev_set_mac_address_user
__tun_chr_ioctl
rtnl_lock
dev_set_mac_address_user
tap_ioctl
rtnl_lock
dev_set_mac_address_user
dev_set_mac_address_user
netdev_lock_ops
netif_set_mac_address_user
dev_addr_sem
v2:
- move lock reorder to happen after kmalloc (Kuniyuki)
Cc: Kohei Enju <enjuk@amazon.com>
Fixes: df43d8bf1031 ("net: replace dev_addr_sem with netdev instance lock")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250312190513.1252045-3-sdf@fomichev.me
Tested-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit df43d8bf10316a7c3b1e47e3cc0057a54df4a5b8.
Cc: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Fixes: df43d8bf1031 ("net: replace dev_addr_sem with netdev instance lock")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250312190513.1252045-2-sdf@fomichev.me
Tested-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Allow platform glue to instruct stmmac to make use of the PHY transmit
clock stop capability when deciding whether to allow the transmit clock
from the DWMAC core to be stopped.
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsITp-005vG9-Px@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pick a more descriptive name for the cmd async data cache.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20250319061251.21452-2-sidong.yang@furiosa.ai
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since out-of-order unlocks are unsupported for rqspinlock, and irqsave
variants enforce strict FIFO ordering anyway, make the same change for
normal non-irqsave variants, such that FIFO ordering is enforced.
Two new verifier state fields (active_lock_id, active_lock_ptr) are used
to denote the top of the stack, and prev_id and prev_ptr are ascertained
whenever popping the topmost entry through an unlock.
Take special care to make these fields part of the state comparison in
refsafe.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250316040541.108729-25-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce verifier-side support for rqspinlock kfuncs. The first step is
allowing bpf_res_spin_lock type to be defined in map values and
allocated objects, so BTF-side is updated with a new BPF_RES_SPIN_LOCK
field to recognize and validate.
Any object cannot have both bpf_spin_lock and bpf_res_spin_lock, only
one of them (and at most one of them per-object, like before) must be
present. The bpf_res_spin_lock can also be used to protect objects that
require lock protection for their kfuncs, like BPF rbtree and linked
list.
The verifier plumbing to simulate success and failure cases when calling
the kfuncs is done by pushing a new verifier state to the verifier state
stack which will verify the failure case upon calling the kfunc. The
path where success is indicated creates all lock reference state and IRQ
state (if necessary for irqsave variants). In the case of failure, the
state clears the registers r0-r5, sets the return value, and skips kfunc
processing, proceeding to the next instruction.
When marking the return value for success case, the value is marked as
0, and for the failure case as [-MAX_ERRNO, -1]. Then, in the program,
whenever user checks the return value as 'if (ret)' or 'if (ret < 0)'
the verifier never traverses such branches for success cases, and would
be aware that the lock is not held in such cases.
We push the kfunc state in check_kfunc_call whenever rqspinlock kfuncs
are invoked. We introduce a kfunc_class state to avoid mixing lock
irqrestore kfuncs with IRQ state created by bpf_local_irq_save.
With all this infrastructure, these kfuncs become usable in programs
while satisfying all safety properties required by the kernel.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250316040541.108729-24-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce four new kfuncs, bpf_res_spin_lock, and bpf_res_spin_unlock,
and their irqsave/irqrestore variants, which wrap the rqspinlock APIs.
bpf_res_spin_lock returns a conditional result, depending on whether the
lock was acquired (NULL is returned when lock acquisition succeeds,
non-NULL upon failure). The memory pointed to by the returned pointer
upon failure can be dereferenced after the NULL check to obtain the
error code.
Instead of using the old bpf_spin_lock type, introduce a new type with
the same layout, and the same alignment, but a different name to avoid
type confusion.
Preemption is disabled upon successful lock acquisition, however IRQs
are not. Special kfuncs can be introduced later to allow disabling IRQs
when taking a spin lock. Resilient locks are safe against AA deadlocks,
hence not disabling IRQs currently does not allow violation of kernel
safety.
__irq_flag annotation is used to accept IRQ flags for the IRQ-variants,
with the same semantics as existing bpf_local_irq_{save, restore}.
These kfuncs will require additional verifier-side support in subsequent
commits, to allow programs to hold multiple locks at the same time.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250316040541.108729-23-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Ensure that the rqspinlock code is only built when the BPF subsystem is
compiled in. Depending on queued spinlock support, we may or may not end
up building the queued spinlock slowpath, and instead fallback to the
test-and-set implementation. Also add entries to MAINTAINERS file.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250316040541.108729-18-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce helper macros that wrap around the rqspinlock slow path and
provide an interface analogous to the raw_spin_lock API. Note that
in case of error conditions, preemption and IRQ disabling is
automatically unrolled before returning the error back to the caller.
Ensure that in absence of CONFIG_QUEUED_SPINLOCKS support, we fallback
to the test-and-set implementation.
Add some comments describing the subtle memory ordering logic during
unlock, and why it's safe.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250316040541.108729-17-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We ripped out PV and virtualization related bits from rqspinlock in an
earlier commit, however, a fair lock performs poorly within a virtual
machine when the lock holder is preempted. As such, retain the
virt_spin_lock fallback to test and set lock, but with timeout and
deadlock detection. We can do this by simply depending on the
resilient_tas_spin_lock implementation from the previous patch.
We don't integrate support for CONFIG_PARAVIRT_SPINLOCKS yet, as that
requires more involved algorithmic changes and introduces more
complexity. It can be done when the need arises in the future.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250316040541.108729-15-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Include a test-and-set fallback when queued spinlock support is not
available. Introduce a rqspinlock type to act as a fallback when
qspinlock support is absent.
Include ifdef guards to ensure the slow path in this file is only
compiled when CONFIG_QUEUED_SPINLOCKS=y. Subsequent patches will add
further logic to ensure fallback to the test-and-set implementation
when queued spinlock support is unavailable on an architecture.
Unlike other waiting loops in rqspinlock code, the one for test-and-set
has no theoretical upper bound under contention, therefore we need a
longer timeout than usual. Bump it up to a second in this case.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250316040541.108729-14-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
While the timeout logic provides guarantees for the waiter's forward
progress, the time until a stalling waiter unblocks can still be long.
The default timeout of 1/4 sec can be excessively long for some use
cases. Additionally, custom timeouts may exacerbate recovery time.
Introduce logic to detect common cases of deadlocks and perform quicker
recovery. This is done by dividing the time from entry into the locking
slow path until the timeout into intervals of 1 ms. Then, after each
interval elapses, deadlock detection is performed, while also polling
the lock word to ensure we can quickly break out of the detection logic
and proceed with lock acquisition.
A 'held_locks' table is maintained per-CPU where the entry at the bottom
denotes a lock being waited for or already taken. Entries coming before
it denote locks that are already held. The current CPU's table can thus
be looked at to detect AA deadlocks. The tables from other CPUs can be
looked at to discover ABBA situations. Finally, when a matching entry
for the lock being taken on the current CPU is found on some other CPU,
a deadlock situation is detected. This function can take a long time,
therefore the lock word is constantly polled in each loop iteration to
ensure we can preempt detection and proceed with lock acquisition, using
the is_lock_released check.
We set 'spin' member of rqspinlock_timeout struct to 0 to trigger
deadlock checks immediately to perform faster recovery.
Note: Extending lock word size by 4 bytes to record owner CPU can allow
faster detection for ABBA. It is typically the owner which participates
in a ABBA situation. However, to keep compatibility with existing lock
words in the kernel (struct qspinlock), and given deadlocks are a rare
event triggered by bugs, we choose to favor compatibility over faster
detection.
The release_held_lock_entry function requires an smp_wmb, while the
release store on unlock will provide the necessary ordering for us. Add
comments to document the subtleties of why this is correct. It is
possible for stores to be reordered still, but in the context of the
deadlock detection algorithm, a release barrier is sufficient and
needn't be stronger for unlock's case.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250316040541.108729-13-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The pending bit is used to avoid queueing in case the lock is
uncontended, and has demonstrated benefits for the 2 contender scenario,
esp. on x86. In case the pending bit is acquired and we wait for the
locked bit to disappear, we may get stuck due to the lock owner not
making progress. Hence, this waiting loop must be protected with a
timeout check.
To perform a graceful recovery once we decide to abort our lock
acquisition attempt in this case, we must unset the pending bit since we
own it. All waiters undoing their changes and exiting gracefully allows
the lock word to be restored to the unlocked state once all participants
(owner, waiters) have been recovered, and the lock remains usable.
Hence, set the pending bit back to zero before returning to the caller.
Introduce a lockevent (rqspinlock_lock_timeout) to capture timeout
event statistics.
Reviewed-by: Barret Rhoden <brho@google.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250316040541.108729-10-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce policy macro RES_CHECK_TIMEOUT which can be used to detect
when the timeout has expired for the slow path to return an error. It
depends on being passed two variables initialized to 0: ts, ret. The
'ts' parameter is of type rqspinlock_timeout.
This macro resolves to the (ret) expression so that it can be used in
statements like smp_cond_load_acquire to break the waiting loop
condition.
The 'spin' member is used to amortize the cost of checking time by
dispatching to the implementation every 64k iterations. The
'timeout_end' member is used to keep track of the timestamp that denotes
the end of the waiting period. The 'ret' parameter denotes the status of
the timeout, and can be checked in the slow path to detect timeouts
after waiting loops.
The 'duration' member is used to store the timeout duration for each
waiting loop. The default timeout value defined in the header
(RES_DEF_TIMEOUT) is 0.25 seconds.
This macro will be used as a condition for waiting loops in the slow
path. Since each waiting loop applies a fresh timeout using the same
rqspinlock_timeout, we add a new RES_RESET_TIMEOUT as well to ensure the
values can be easily reinitialized to the default state.
Reviewed-by: Barret Rhoden <brho@google.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250316040541.108729-8-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This header contains the public declarations usable in the rest of the
kernel for rqspinlock.
Let's also type alias qspinlock to rqspinlock_t to ensure consistent use
of the new lock type. We want to remove dependence on the qspinlock type
in later patches as we need to provide a test-and-set fallback, hence
begin abstracting away from now onwards.
Reviewed-by: Barret Rhoden <brho@google.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250316040541.108729-6-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- Fix a regression on ATI AHCI controllers, where certain Samsung
drives fails to be detected on a warm boot when LPM is enabled.
LPM on ATI AHCI works fine with other drives. Likewise, the
Samsung drives works fine with LPM with other AHI controllers.
Thus, just like the weirdo ATA_QUIRK_NO_NCQ_ON_ATI quirk, add a
new ATA_QUIRK_NO_LPM_ON_ATI quirk to disable LPM only on ATI
AHCI controllers.
* tag 'ata-6.14-final' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Add ATA_QUIRK_NO_LPM_ON_ATI for certain Samsung SSDs
|
|
When we currently create a pidfd we check that the task hasn't been
reaped right before we create the pidfd. But it is of course possible
that by the time we return the pidfd to userspace the task has already
been reaped since we don't check again after having created a dentry for
it.
This was fine until now because that race was meaningless. But now that
we provide PIDFD_INFO_EXIT it is a problem because it is possible that
the kernel returns a reaped pidfd and it depends on the race whether
PIDFD_INFO_EXIT information is available. This depends on if the task
gets reaped before or after a dentry has been attached to struct pid.
Make this consistent and only returned pidfds for reaped tasks if
PIDFD_INFO_EXIT information is available. This is done by performing
another check whether the task has been reaped right after we attached a
dentry to struct pid.
Since pidfs_exit() is called before struct pid's task linkage is removed
the case where the task got reaped but a dentry was already attached to
struct pid and exit information was recorded and published can be
handled correctly. In that case we do return a pidfd for a reaped task
like we would've before.
Link: https://lore.kernel.org/r/20250316-kabel-fehden-66bdb6a83436@brauner
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
KVM x86/mmu changes for 6.15
Add support for "fast" aging of SPTEs in both the TDP MMU and Shadow MMU, where
"fast" means "without holding mmu_lock". Not taking mmu_lock allows multiple
aging actions to run in parallel, and more importantly avoids stalling vCPUs,
e.g. due to holding mmu_lock for an extended duration while a vCPU is faulting
in memory.
For the TDP MMU, protect aging via RCU; the page tables are RCU-protected and
KVM doesn't need to access any metadata to age SPTEs.
For the Shadow MMU, use bit 1 of rmap pointers (bit 0 is used to terminate a
list of rmaps) to implement a per-rmap single-bit spinlock. When aging a gfn,
acquire the rmap's spinlock with read-only permissions, which allows hardening
and optimizing the locking and aging, e.g. locking an rmap for write requires
mmu_lock to also be held. The lock is NOT a true R/W spinlock, i.e. multiple
concurrent readers aren't supported.
To avoid forcing all SPTE updates to use atomic operations (clearing the
Accessed bit out of mmu_lock makes it inherently volatile), rework and rename
spte_has_volatile_bits() to spte_needs_atomic_update() and deliberately exclude
the Accessed bit. KVM (and mm/) already tolerates false positives/negatives
for Accessed information, and all testing has shown that reducing the latency
of aging is far more beneficial to overall system performance than providing
"perfect" young/old information.
|
|
With the addition of the soc_mixer_ctl_to_reg() helper it is now very
clear that the only difference between snd_soc_put_volsw() and
snd_soc_put_volsw_range() is that the former supports double controls
with both values in the same register. As such we can combine both
functions.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250318171459.3203730-11-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With the addition of the soc_mixer_reg_to_ctl() helper it is now very
clear that the only difference between snd_soc_get_volsw() and
snd_soc_get_volsw_range() is that the former supports double controls
with both values in the same register. As such we can combine both
functions.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250318171459.3203730-10-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The only difference between snd_soc_info_volsw() and
snd_soc_info_volsw_range() is that the later will not force a 2
value control to be of type integer if the name ends in "Volume".
The kernel currently contains no users of snd_soc_info_volsw_range()
that would return a boolean control with this code, so the risk is
quite low and it seems appropriate that it should contain volume
control detection. So remove snd_soc_info_volsw_range() and point its
users at snd_soc_info_volsw().
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250318171459.3203730-9-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In addition to matching vendor/family/model/feature, for hybrid variants it is
required to also match cpu-type. For example, some CPU vulnerabilities like
RFDS only affect a specific cpu-type.
To be able to also match CPUs based on their type, add a new field "type" to
struct x86_cpu_id which is used by the CPU-matching tables. Introduce
X86_CPU_TYPE_ANY for the cases that don't care about the cpu-type.
[ bp: Massage commit message. ]
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250311-add-cpu-type-v8-3-e8514dcaaff2@linux.intel.com
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
For calibration, basic version does not contain any calibration addresses,
it depends on calibration tool to convey the addresses to the driver.
Since Alpha and Beta firmware, all the calibration addresses are saved
into the firmware.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313093238.1184-1-shenghao-ding@ti.com
|
|
Back-merge of 6.14 devel branch for further developments of TAS
codecsBack-merge of 6.14 devel branch for further developments.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There are already a lot of drivers that have been using
i2c_8bit_addr_from_msg() for 7-bit addresses, now it's time
to have the similar for 10-bit addresses.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250213141045.2716943-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The zstd and zlib compression types support setting compression levels.
Enhance the defrag interface to specify the levels as well. For zstd the
negative (realtime) levels are also accepted.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Move the definition of the struct mcs_spinlock from the private
mcs_spinlock.h header in kernel/locking to the mcs_spinlock.h
asm-generic header, since we will need to reference it from the
qspinlock.h header in subsequent commits.
Reviewed-by: Barret Rhoden <brho@google.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250316040541.108729-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The perf_event_read_event_output helper is currently only available to
tracing protrams, but is useful for other BPF programs like sched_ext
schedulers. When the helper is available, provide its bpf_func_proto
directly from the bpf base_proto.
Signed-off-by: Emil Tsalapatis (Meta) <emil@etsalapatis.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250318030753.10949-1-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Aside from the IOPF framework, iommufd provides an additional pathway to
report hardware events, via the vEVENTQ of vIOMMU infrastructure.
Define an iommu_vevent_arm_smmuv3 uAPI structure, and report stage-1 events
in the threaded IRQ handler. Also, add another four event record types that
can be forwarded to a VM.
Link: https://patch.msgid.link/r/5cf6719682fdfdabffdb08374cdf31ad2466d75a.1741719725.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Similar to iommu_report_device_fault, this allows IOMMU drivers to report
vIOMMU events from threaded IRQ handlers to user space hypervisors.
Link: https://patch.msgid.link/r/44be825042c8255e75d0151b338ffd8ba0e4920b.1741719725.git.nicolinc@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This is a reverse search v.s. iommufd_viommu_find_dev, as drivers may want
to convert a struct device pointer (physical) to its virtual device ID for
an event injection to the user space VM.
Again, this avoids exposing more core structures to the drivers, than the
iommufd_viommu alone.
Link: https://patch.msgid.link/r/18b8e8bc1b8104d43b205d21602c036fd0804e56.1741719725.git.nicolinc@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Introduce a new IOMMUFD_OBJ_VEVENTQ object for vIOMMU Event Queue that
provides user space (VMM) another FD to read the vIOMMU Events.
Allow a vIOMMU object to allocate vEVENTQs, with a condition that each
vIOMMU can only have one single vEVENTQ per type.
Add iommufd_veventq_alloc() with iommufd_veventq_ops for the new ioctl.
Link: https://patch.msgid.link/r/21acf0751dd5c93846935ee06f93b9c65eff5e04.1741719725.git.nicolinc@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The count field in virtchnl_proto_hdrs and virtchnl_filter_action_set
should never be negative while still being valid. Changing it from
int to u32 ensures proper handling of values in virtchnl messages in
driverrs and prevents unintended behavior.
In its current signed form, a negative count does not trigger
an error in ice driver but instead results in it being treated as 0.
This can lead to unexpected outcomes when processing messages.
By using u32, any invalid values will correctly trigger -EINVAL,
making error detection more robust.
Fixes: 1f7ea1cd6a374 ("ice: Enable FDIR Configure for AVF")
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jan Glaza <jan.glaza@intel.com>
Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The max_bad_eraseblocks_per_lun member of nand_device obviously
describes a number of *maximum* number of bad eraseblocks per LUN.
Fix this obvious typo.
Fixes: 377e517b5fa5 ("mtd: nand: Add max_bad_eraseblocks_per_lun info to memorg")
Cc: <stable+noautosel@kernel.org> # fix kdoc comment
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Let's assume all these macros should not have a trailing comma, this way
the caller can use a more formal and usual C writing style, as reflected
in the Macronix driver.
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
No functional changes.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250313142744.1323281-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
tcp_in_quickack_mode() is called from input path for small packets.
It calls __sk_dst_get() which reads sk->sk_dst_cache which has been
put in sock_read_tx group (for good reasons).
Then dst_metric(dst, RTAX_QUICKACK) also needs extra cache line misses.
Cache RTAX_QUICKACK in icsk->icsk_ack.dst_quick_ack to no longer pull
these cache lines for the cases a delayed ACK is scheduled.
After this patch TCP receive path does not longer access sock_read_tx
group.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250312083907.1931644-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
They are a dependency for applying some changes to the MAINTAINERS
file.
|
|
In the following patch, we no longer assume inet_frag_kill()
callers own a reference.
Consuming two refcounts from inet_frag_kill() would lead in UAF.
Propagate the pointer to the refs that will be consumed later
by the final inet_frag_putn() call.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250312082250.1803501-4-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
inet_frag_putn() can release multiple references
in one step.
Use it in inet_frags_free_cb().
Replace inet_frag_put(X) with inet_frag_putn(X, 1)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250312082250.1803501-2-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since commit a4ea4c477619 ("rxrpc: Don't use a ring buffer for call Tx
queue") this function is not used anymore.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312063450.183652-1-yuehaibing@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This feature/cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- drop batadv_priv_debug_log struct, by Sven Eckelmann
- adopt netdev_hold() / netdev_put(), by Eric Dumazet
- add support for jumbo frames, by Sven Eckelmann
- use consistent name for mesh interface, by Sven Eckelmann
- cleanup B.A.T.M.A.N. IV OGM aggregation handling,
by Sven Eckelmann (4 patches)
- add missing newlines for log macros, by Sven Eckelmann
* tag 'batadv-next-pullrequest-20250313' of git://git.open-mesh.org/linux-merge:
batman-adv: add missing newlines for log macros
batman-adv: Limit aggregation size to outgoing MTU
batman-adv: Use actual packet count for aggregated packets
batman-adv: Switch to bitmap helper for aggregation handling
batman-adv: Limit number of aggregated packets directly
batman-adv: Use consistent name for mesh interface
batman-adv: Add support for jumbo frames
batman-adv: adopt netdev_hold() / netdev_put()
batman-adv: Drop batadv_priv_debug_log struct
batman-adv: Start new development cycle
====================
Link: https://patch.msgid.link/20250313164519.72808-1-sw@simonwunderlich.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
