| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
pci_setup_bridge() is only used within setup-bus.c. Therefore, make it a
static function.
Link: https://lore.kernel.org/r/20250311174701.3586-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Neither pci_reassign_bridge_resources() nor pci_reassign_resource() is used
outside of the PCI subsystem. They seem to be naturally static functions
but since resource fitting/assignment is split between setup-bus.c and
setup-res.c, they fall into different sides of the divide and need to be
declared.
Move the declarations of pci_reassign_bridge_resources() and
pci_reassign_resource() into pci/pci.h to keep them internal to PCI
subsystem.
Link: https://lore.kernel.org/r/20250311174701.3586-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
pci_rescan_bus_bridge_resize() is only used by code inside PCI subsystem.
The comment also falsely advertises it to be for hotplug drivers, yet the
only caller is from sysfs store function. Move the function declaration
into pci/pci.h.
Link: https://lore.kernel.org/r/20250311174701.3586-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Since commit 4e1a7df45480 ("cpumask: Add enabled cpumask
for present CPUs that can be brought online") introduced
cpu_enabled_mask, the comment line describing the mask
has been slightly out of alignment with the adjacent
lines.
Fix this by removing a single space character.
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
A few additional definitions are required for the mshv driver code
(to follow). Introduce those here and clean up a little bit while
at it.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-10-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-10-git-send-email-nunodasneves@linux.microsoft.com>
|
|
Add mshv_handler() to process messages related to managing guest
partitions such as intercepts, doorbells, and scheduling messages.
In a (non-nested) root partition, the same interrupt vector is shared
between the vmbus and mshv_root drivers.
Introduce a stub for mshv_handler() and call it in
sysvec_hyperv_callback alongside vmbus_handler().
Even though both handlers will be called for every Hyper-V interrupt,
the messages for each driver are delivered to different offsets
within the SYNIC message page, so they won't step on each other.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-9-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-9-git-send-email-nunodasneves@linux.microsoft.com>
|
|
Factor out the check for enabling auto eoi, to be reused in root
partition code.
No functional changes.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-5-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-5-git-send-email-nunodasneves@linux.microsoft.com>
|
|
These non-nested msr and fast hypercall functions are present in x86,
but they must be available in both architectures for the root partition
driver code.
While at it, remove the redundant 'extern' keywords from the
hv_do_hypercall() variants in asm-generic/mshyperv.h.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-4-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-4-git-send-email-nunodasneves@linux.microsoft.com>
|
|
Extend the "ms_hyperv_info" structure to include a new field,
"ext_features", for capturing extended Hyper-V features.
Update the "ms_hyperv_init_platform" function to retrieve these features
using the cpuid instruction and include them in the informational output.
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1741980536-3865-3-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-3-git-send-email-nunodasneves@linux.microsoft.com>
|
|
Introduce hv_status_printk() macros as a convenience to log hypercall
errors, formatting them with the status code (HV_STATUS_*) as a raw hex
value and also as a string, which saves some time while debugging.
Create a table of HV_STATUS_ codes with strings and mapped errnos, and
use it for hv_result_to_string() and hv_result_to_errno().
Use the new hv_status_printk()s in hv_proc.c, hyperv-iommu.c, and
irqdomain.c hypercalls to aid debugging in the root partition.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-2-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-2-git-send-email-nunodasneves@linux.microsoft.com>
|
|
The union vmpacket_largest_possible_header and several structs have not
been used for a long time afaict - remove them.
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250311091634.494888-2-thorsten.blum@linux.dev
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250311091634.494888-2-thorsten.blum@linux.dev>
|
|
CONFIG_MSHV_ROOT allows kernels built to run as a normal Hyper-V guest
to exclude the root partition code, which is expected to grow
significantly over time.
This option is a tristate so future driver code can be built as a
(m)odule, allowing faster development iteration cycles.
If CONFIG_MSHV_ROOT is disabled, don't compile hv_proc.c, and stub
hv_root_partition() to return false unconditionally. This allows the
compiler to optimize away root partition code blocks since they will
be disabled at compile time.
In the case of booting as root partition *without* CONFIG_MSHV_ROOT
enabled, print a critical error (the kernel will likely crash).
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1740167795-13296-4-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1740167795-13296-4-git-send-email-nunodasneves@linux.microsoft.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc8).
Conflict:
tools/testing/selftests/net/Makefile
03544faad761 ("selftest: net: add proc_net_pktgen")
3ed61b8938c6 ("selftests: net: test for lwtunnel dst ref loops")
tools/testing/selftests/net/config:
85cb3711acb8 ("selftests: net: Add test cases for link and peer netns")
3ed61b8938c6 ("selftests: net: test for lwtunnel dst ref loops")
Adjacent commits:
tools/testing/selftests/net/Makefile
c935af429ec2 ("selftests: net: add support for testing SO_RCVMARK and SO_RCVPRIORITY")
355d940f4d5a ("Revert "selftests: Add IPv6 link-local address generation tests for GRE devices."")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The immediate issue being fixed here is a nVMX bug where KVM fails to
detect that, after nested VM-Exit, L1 has a pending IRQ (or NMI).
However, checking for a pending interrupt accesses the legacy PIC, and
x86's kvm_arch_destroy_vm() currently frees the PIC before destroying
vCPUs, i.e. checking for IRQs during the forced nested VM-Exit results
in a NULL pointer deref; that's a prerequisite for the nVMX fix.
The remaining patches attempt to bring a bit of sanity to x86's VM
teardown code, which has accumulated a lot of cruft over the years. E.g.
KVM currently unloads each vCPU's MMUs in a separate operation from
destroying vCPUs, all because when guest SMP support was added, KVM had a
kludgy MMU teardown flow that broke when a VM had more than one 1 vCPU.
And that oddity lived on, for 18 years...
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Some Turris devices support signing messages with a per-device unique
asymmetric key that was created on the device at manufacture time.
Add helper module that helps to expose this ability via the keyctl()
syscall.
A device-specific driver can register a signing key by calling
devm_turris_signing_key_create().
Both the `.turris-signing-keys` keyring and the signing key are created
with only the VIEW, READ and SEARCH permissions for userspace - it is
impossible to link / unlink / move them, set their attributes, or unlink
the keyring from userspace.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.15
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU implementations
where a VM may run, addressing a longstanding issue of guest CPU
errata awareness in big-little systems and cross-implementation VM
migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
|
|
Now that the rstat lock is being re-acquired on every CPU iteration in
cgroup_rstat_flush_locked(), having the initially acquire the lock is
unnecessary and unclear.
Inline cgroup_rstat_flush_locked() into cgroup_rstat_flush() and move
the lock/unlock calls to the beginning and ending of the loop body to
make the critical section obvious.
cgroup_rstat_flush_hold/release() do not make much sense with the lock
being dropped and reacquired internally. Since it has no external
callers, remove it and explicitly acquire the lock in
cgroup_base_stat_cputime_show() instead.
This leaves the code with a single flushing function,
cgroup_rstat_flush().
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, bluetooth and ipsec.
This contains a last minute revert of a recent GRE patch, mostly to
allow me stating there are no known regressions outstanding.
Current release - regressions:
- revert "gre: Fix IPv6 link-local address generation."
- eth: ti: am65-cpsw: fix NAPI registration sequence
Previous releases - regressions:
- ipv6: fix memleak of nhc_pcpu_rth_output in fib_check_nh_v6_gw().
- mptcp: fix data stream corruption in the address announcement
- bluetooth: fix connection regression between LE and non-LE adapters
- can:
- flexcan: only change CAN state when link up in system PM
- ucan: fix out of bound read in strscpy() source
Previous releases - always broken:
- lwtunnel: fix reentry loops
- ipv6: fix TCP GSO segmentation with NAT
- xfrm: force software GSO only in tunnel mode
- eth: ti: icssg-prueth: add lock to stats
Misc:
- add Andrea Mayer as a maintainer of SRv6"
* tag 'net-6.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (33 commits)
MAINTAINERS: Add Andrea Mayer as a maintainer of SRv6
Revert "gre: Fix IPv6 link-local address generation."
Revert "selftests: Add IPv6 link-local address generation tests for GRE devices."
net/neighbor: add missing policy for NDTPA_QUEUE_LENBYTES
tools headers: Sync uapi/asm-generic/socket.h with the kernel sources
mptcp: Fix data stream corruption in the address announcement
selftests: net: test for lwtunnel dst ref loops
net: ipv6: ioam6: fix lwtunnel_output() loop
net: lwtunnel: fix recursion loops
net: ti: icssg-prueth: Add lock to stats
net: atm: fix use after free in lec_send()
xsk: fix an integer overflow in xp_create_and_assign_umem()
net: stmmac: dwc-qos-eth: use devm_kzalloc() for AXI data
selftests: drv-net: use defer in the ping test
phy: fix xa_alloc_cyclic() error handling
dpll: fix xa_alloc_cyclic() error handling
devlink: fix xa_alloc_cyclic() error handling
ipv6: Set errno after ip_fib_metrics_init() in ip6_route_info_create().
ipv6: Fix memleak of nhc_pcpu_rth_output in fib_check_nh_v6_gw().
net: ipv6: fix TCP GSO segmentation with NAT
...
|
|
Merge series from Francesco Dolcini <francesco@dolcini.it>:
This patch series adds DMIC and DRC support to the WM8904 driver, a new
of_ helper is added to simplify the driver code.
DRC functionality is added in the same patch series to provide the
necessary dynamic range control to make DMIC support useful.
The WM8904 supports digital microphones on two of its inputs:
IN1L/DMICDAT1 and IN1R/DMICDAT2. These two inputs can either be
connected to an ADC or to the DMIC system. There is an ADC for each
line, and only one DMIC block. This DMIC block is either connected to
DMICDAT1 or to DMICDAT2. One DMIC data line supports two digital
microphones via time multiplexing.
The pin's functionality is decided during hardware design (IN1L vs
DMICDAT1 and IN1R vs DMICDAT2). This is reflected in the Device Tree.
If one line is analog and one is DMIC, we need to be able to switch
between ADC and DMIC at runtime. The DMIC source is known from the
Device Tree. If both are DMIC inputs, we need to be able to switch the
DMIC source. There is no need to switch between ADC and DMIC at runtime.
Therefore, kcontrols are dynamically added by the driver depending on
its Device Tree configuration.
This is a heavy rework of a previous patch series provided by Alifer
Moraes and Pierluigi Passaro,
https://lore.kernel.org/lkml/20220307141041.27538-1-alifer.m@variscite.com.
|
|
In particular, serdev_device_write_room() is not called, so the whole
serdev's write_room() can go.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20250317070046.24386-17-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert TTY_DRIVER_TYPE_*, and subtype macros to two enums:
tty_driver_type and tty_driver_subtype. This allows for easier
kernel-doc (later), grouping of these nicely, and proper checking.
The tty_driver's ::type and ::subtype now use these enums instead of
bare "short".
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250317070046.24386-16-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
__tty_alloc_driver()'s kernel-doc needed some care: describe the return
value using the standard "Returns:", and use the new enum tty_driver_flag
for @flags.
Then, the tty_alloc_driver() macro was undocumented, but referenced many
times in the docs. Copy the docs from the above (except the @owner
parameter, obviously).
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250317070046.24386-15-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert TTY_DRIVER_* macros (flags) to an enum. This allows for easier
kernel-doc (the comment needed fine tuning), grouping of these nicely,
and proper checking.
Given these are flags, define them using modern BIT() instead of hex
constants.
It turns out (thanks, kernel-doc checker) that internal
TTY_DRIVER_INSTALLED was undocumented. Fix that too.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250317070046.24386-14-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
So that they can be referenced in structs once converted to enums (in
the next patches).
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250317070046.24386-13-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
"N_TTY_BUF_SIZE" is private to n_tty and shall not be exposed to the
world. Definitely not in tty.h somewhere in the middle of "struct
tty_struct".
This is a remnant of moving "read_flags" to "struct n_tty_data" in
commit 3fe780b379fa ("TTY: move ldisc data from tty_struct: bitmaps").
But some cleanup was needed first (in previous patches).
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250317070046.24386-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert TTY_* macros (flags) to an enum. This allows for easier
kernel-doc (the comment needed fine tuning), grouping of these nicely,
and proper checking.
Note that these are bit positions. So they are used such as
test_bit(TTY_THROTTLED, ...). Given these are not the user API (only
in-kernel API/ABI), the bit positions are NOT preserved in this patch.
All are renumbered naturally using the enum-auto-numbering.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250317070046.24386-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Flag IOMAP_ATOMIC_SW is not really required. The idea of having this flag
is that the FS ->iomap_begin callback could check if this flag is set to
decide whether to do a SW (FS-based) atomic write. But the FS can set
which ->iomap_begin callback it wants when deciding to do a FS-based
atomic write.
Furthermore, it was thought that IOMAP_ATOMIC_HW is not a proper name, as
the block driver can use SW-methods to emulate an atomic write. So change
back to IOMAP_ATOMIC.
The ->iomap_begin callback needs though to indicate to iomap core that
REQ_ATOMIC needs to be set, so add IOMAP_F_ATOMIC_BIO for that.
These changes were suggested by Christoph Hellwig and Dave Chinner.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250320120250.4087011-4-john.g.garry@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: updates for Linux v6.15
CoreSight self-hosted tracing driver subsystem update for Linux v6.15.
The update includes:
- CoreSight trace capture for Panic/Watchdog timeouts
- Fixes to ETM4x driver to synchronize register reads as required by the TRM
- Support for Qualcomm CoreSight TMC Control Unit driver
- Conversion of device locks to raw_spinlock for components that are used
by the Perf mode.
- Miscellaneous fixes for the subsystem
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (41 commits)
Coresight: Fix a NULL vs IS_ERR() bug in probe
coresight: configfs: Constify struct config_item_type
coresight: docs: Remove target sink from examples
coresight/ultrasoc: change smb_drv_data spinlock's type to raw_spinlock_t
coresight-tmc: change tmc_drvdata spinlock's type to raw_spinlock_t
coresight-replicator: change replicator_drvdata spinlock's type to raw_spinlock_t
coresight-funnel: change funnel_drvdata spinlock's type to raw_spinlock_t
coresight-etb10: change etb_drvdata spinlock's type to raw_spinlock_t
coresight-cti: change cti_drvdata spinlock's type to raw_spinlock_t
coresight: change coresight_trace_id_map's lock type to raw_spinlock_t
coresight-etm4x: change etmv4_drvdata spinlock type to raw_spinlock_t
coresight: change coresight_device lock type to raw_spinlock_t
coresight: add verification process for coresight_etm_get_trace_id
Coresight: Add Coresight TMC Control Unit driver
dt-bindings: arm: Add Coresight TMC Control Unit hardware
Coresight: Change functions to accept the coresight_path
Coresight: Change to read the trace ID from coresight_path
Coresight: Allocate trace ID after building the path
Coresight: Introduce a new struct coresight_path
Coresight: Use coresight_etm_get_trace_id() in traceid_show()
...
|
|
Let's provide an helper to make it easier for bridge drivers to
power-cycle their bridge.
In order to avoid a circular dependency between that new helper and
drm_atomic_helper_reset_crtc(), this new helper will be in a
drm_bridge_helper.c file to follow the pattern we have for other
objects.
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Tested-by: Herve Codina <herve.codina@bootlin.com>
Co-developed-by: Simona Vetter <simona.vetter@intel.com>
Signed-off-by: Simona Vetter <simona.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-8-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
We'll need the HDMI state tests light_up_connector() function in more
tests, so let's promote it to a helper.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-5-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
With the bridges switching over to drm_bridge_connector, the direct
association between a bridge driver and its connector was lost.
This is mitigated for atomic bridge drivers by the fact you can access
the encoder, and then call drm_atomic_get_old_connector_for_encoder() or
drm_atomic_get_new_connector_for_encoder() with drm_atomic_state.
This was also made easier by providing drm_atomic_state directly to all
atomic hooks bridges can implement.
However, bridge drivers don't have a way to access drm_atomic_state
outside of the modeset path, like from the hotplug interrupt path or any
interrupt handler.
Let's introduce a function to retrieve the connector currently assigned
to an encoder, without using drm_atomic_state, to make these drivers'
life easier.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Tested-by: Herve Codina <herve.codina@bootlin.com>
Co-developed-by: Simona Vetter <simona.vetter@intel.com>
Signed-off-by: Simona Vetter <simona.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-4-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The current bridge state is accessible from the drm_bridge structure,
but since it's fairly indirect it's not easy to figure out.
Provide a helper to retrieve it.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-2-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The drm_bridge structure contains an encoder pointer that is widely used
by bridge drivers. This pattern is largely documented as deprecated in
other KMS entities for atomic drivers.
However, one of the main use of that pointer is done in attach to just
call drm_bridge_attach on the next bridge to add it to the bridge list.
While this dereferences the bridge->encoder pointer, it's effectively
the same encoder the bridge was being attached to.
We can make it more explicit by adding the encoder the bridge is
attached to to the list of attach parameters. This also removes the need
to dereference bridge->encoder in most drivers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-1-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Read in optional codec-specific properties from the device tree.
The platform_data structure is not populated when using device trees.
This change parses optional dts properties to populate it.
- wlf,in1l-as-dmicdat1
- wlf,in1r-as-dmicdat2
- wlf,gpio-cfg
- wlf,micbias-cfg
- wlf,drc-cfg-regs
- wlf,drc-cfg-names
- wlf,retune-mobile-cfg-regs
- wlf,retune-mobile-cfg-names
- wlf,retune-mobile-cfg-hz
Datasheet: https://statics.cirrus.com/pubs/proDatasheet/WM8904_Rev4.1.pdf
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250319142059.46692-5-francesco@dolcini.it
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is an of_property_read_u32_index and of_property_read_u64_index.
This patch adds a similar helper for u16.
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250319142059.46692-2-francesco@dolcini.it
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge the slab feature branch kfree_rcu_tiny for 6.15:
- Move the TINY_RCU kvfree_rcu() implementation from RCU to SLAB
subsystem and cleanup its integration.
|
|
Similarly to net.mptcp.available_schedulers, this patch adds a new one
net.mptcp.available_path_managers to list the available path managers.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313-net-next-mptcp-pm-ops-intro-v1-11-f4e4a88efc50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In order to allow users to develop their own BPF-based path manager,
this patch defines a struct ops "mptcp_pm_ops" for an MPTCP path
manager, which contains a set of interfaces. Currently only init()
and release() interfaces are included, subsequent patches will add
others step by step.
Add a set of functions to register, unregister, find and validate a
given path manager struct ops.
"list" is used to add this path manager to mptcp_pm_list list when
it is registered. "name" is used to identify this path manager.
mptcp_pm_find() uses "name" to find a path manager on the list.
mptcp_pm_unregister is not used in this set, but will be invoked in
.unreg of struct bpf_struct_ops. mptcp_pm_validate() will be invoked
in .validate of struct bpf_struct_ops. That's why they are exported.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313-net-next-mptcp-pm-ops-intro-v1-6-f4e4a88efc50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In architectures that use the polling bit, current_clr_polling() employs
smp_mb() to ensure that the clearing of the polling bit is visible to
other cores before checking TIF_NEED_RESCHED.
However, smp_mb() can be costly. Given that clear_bit() is an atomic
operation, replacing smp_mb() with smp_mb__after_atomic() is appropriate.
Many architectures implement smp_mb__after_atomic() as a lighter-weight
barrier compared to smp_mb(), leading to performance improvements.
For instance, on x86, smp_mb__after_atomic() is a no-op. This change
eliminates a smp_mb() instruction in the cpuidle wake-up path, saving
several CPU cycles and thereby reducing wake-up latency.
Architectures that do not use the polling bit will retain the original
smp_mb() behavior to ensure that existing dependencies remain unaffected.
Signed-off-by: Yujun Dong <yujundong@pascal-lab.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241230141624.155356-1-yujundong@pascal-lab.net
|
|
1. predict the file was found
2. explicitly compare the ref to "one", ignoring the dead zone
The latter arguably improves the behavior to begin with. Suppose the
count turned bad -- the previously used ref routine is going to check
for it and return 0, indicating the count does not necessitate taking
->f_pos_lock. But there very well may be several users.
i.e. not paying for special-casing the dead zone improves semantics.
While here spell out each condition in a dedicated if statement. This
has no effect on generated code.
Sizes are as follows (in bytes; gcc 13, x86-64):
stock: 321
likely(): 298
likely()+ref: 280
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250319215801.1870660-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
'rockchip', 's390', 'core', 'intel/vt-d' and 'amd/amd-vi' into next
|
|
phy_loopback() leaves it to the PHY driver to select the speed of the
loopback mode. Thus, the speed of the loopback mode depends on the PHY
driver in use.
Add support for speed selection to phy_loopback() to enable loopback
with defined speeds. Ensure that link up is signaled if speed changes
as speed is not allowed to change during link up. Link down and up is
necessary for a new speed.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://patch.msgid.link/20250312203010.47429-3-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
PHY drivers support loopback mode, but it is not possible to select the
speed of the loopback mode. The speed is chosen by the set_loopback()
operation of the PHY driver. Same is valid for genphy_loopback().
There are PHYs that support loopback with different speeds. Extend
set_loopback() to make loopback speed selection possible.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250312203010.47429-2-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.15
Improve the client interface for the Qualcomm ICE driver to avoid
leaking references, including fixing the client drivers to call the new
function.
Adopt str_on_off() helper in AOSS driver and mark non-global servreg QMI
element info array in the PDR driver static.
* tag 'qcom-drivers-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: Do not expose internal servreg_location_entry_ei array
soc: qcom: ice: make of_qcom_ice_get() static
scsi: ufs: qcom: fix dev reference leaked through of_qcom_ice_get
mmc: sdhci-msm: fix dev reference leaked through of_qcom_ice_get
soc: qcom: ice: introduce devm_of_qcom_ice_get
dt-bindings: soc: qcom: qcom,pmic-glink: Document SM8750 compatible
soc: qcom: Use str_enable_disable-like helpers
Link: https://lore.kernel.org/r/20250317210158.2025380-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
* kvm-arm64/pmu-fixes:
: vPMU fixes for 6.15 courtesy of Akihiko Odaki
:
: Various fixes to KVM's vPMU implementation, notably ensuring
: userspace-directed changes to the PMCs are reflected in the backing perf
: events.
KVM: arm64: PMU: Reload when resetting
KVM: arm64: PMU: Reload when user modifies registers
KVM: arm64: PMU: Fix SET_ONE_REG for vPMC regs
KVM: arm64: PMU: Assume PMU presence in pmu-emul.c
KVM: arm64: PMU: Set raw values from user to PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/writable-midr:
: Writable implementation ID registers, courtesy of Sebastian Ott
:
: Introduce a new capability that allows userspace to set the
: ID registers that identify a CPU implementation: MIDR_EL1, REVIDR_EL1,
: and AIDR_EL1. Also plug a hole in KVM's trap configuration where
: SMIDR_EL1 was readable at EL1, despite the fact that KVM does not
: support SME.
KVM: arm64: Fix documentation for KVM_CAP_ARM_WRITABLE_IMP_ID_REGS
KVM: arm64: Copy MIDR_EL1 into hyp VM when it is writable
KVM: arm64: Copy guest CTR_EL0 into hyp VM
KVM: selftests: arm64: Test writes to MIDR,REVIDR,AIDR
KVM: arm64: Allow userspace to change the implementation ID registers
KVM: arm64: Load VPIDR_EL2 with the VM's MIDR_EL1 value
KVM: arm64: Maintain per-VM copy of implementation ID regs
KVM: arm64: Set HCR_EL2.TID1 unconditionally
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/pmuv3-asahi:
: Support PMUv3 for KVM guests on Apple silicon
:
: Take advantage of some IMPLEMENTATION DEFINED traps available on Apple
: parts to trap-and-emulate the PMUv3 registers on behalf of a KVM guest.
: Constrain the vPMU to a cycle counter and single event counter, as the
: Apple PMU has events that cannot be counted on every counter.
:
: There is a small new interface between the ARM PMU driver and KVM, where
: the PMU driver owns the PMUv3 -> hardware event mappings.
arm64: Enable IMP DEF PMUv3 traps on Apple M*
KVM: arm64: Provide 1 event counter on IMPDEF hardware
drivers/perf: apple_m1: Provide helper for mapping PMUv3 events
KVM: arm64: Remap PMUv3 events onto hardware
KVM: arm64: Advertise PMUv3 if IMPDEF traps are present
KVM: arm64: Compute synthetic sysreg ESR for Apple PMUv3 traps
KVM: arm64: Move PMUVer filtering into KVM code
KVM: arm64: Use guard() to cleanup usage of arm_pmus_lock
KVM: arm64: Drop kvm_arm_pmu_available static key
KVM: arm64: Use a cpucap to determine if system supports FEAT_PMUv3
KVM: arm64: Always support SW_INCR PMU event
KVM: arm64: Compute PMCEID from arm_pmu's event bitmaps
drivers/perf: apple_m1: Support host/guest event filtering
drivers/perf: apple_m1: Refactor event select/filter configuration
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/pv-cpuid:
: Paravirtualized implementation ID, courtesy of Shameer Kolothum
:
: Big-little has historically been a pain in the ass to virtualize. The
: implementation ID (MIDR, REVIDR, AIDR) of a vCPU can change at the whim
: of vCPU scheduling. This can be particularly annoying when the guest
: needs to know the underlying implementation to mitigate errata.
:
: "Hyperscalers" face a similar scheduling problem, where VMs may freely
: migrate between hosts in a pool of heterogenous hardware. And yes, our
: server-class friends are equally riddled with errata too.
:
: In absence of an architected solution to this wart on the ecosystem,
: introduce support for paravirtualizing the implementation exposed
: to a VM, allowing the VMM to describe the pool of implementations that a
: VM may be exposed to due to scheduling/migration.
:
: Userspace is expected to intercept and handle these hypercalls using the
: SMCCC filter UAPI, should it choose to do so.
smccc: kvm_guest: Fix kernel builds for 32 bit arm
KVM: selftests: Add test for KVM_REG_ARM_VENDOR_HYP_BMAP_2
smccc/kvm_guest: Enable errata based on implementation CPUs
arm64: Make _midr_in_range_list() an exported function
KVM: arm64: Introduce KVM_REG_ARM_VENDOR_HYP_BMAP_2
KVM: arm64: Specify hypercall ABI for retrieving target implementations
arm64: Modify _midr_range() functions to read MIDR/REVIDR internally
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/nv-vgic:
: NV VGICv3 support, courtesy of Marc Zyngier
:
: Support for emulating the GIC hypervisor controls and managing shadow
: VGICv3 state for the L1 hypervisor. As part of it, bring in support for
: taking IRQs to the L1 and UAPI to manage the VGIC maintenance interrupt.
KVM: arm64: nv: Fail KVM init if asking for NV without GICv3
KVM: arm64: nv: Allow userland to set VGIC maintenance IRQ
KVM: arm64: nv: Fold GICv3 host trapping requirements into guest setup
KVM: arm64: nv: Propagate used_lrs between L1 and L0 contexts
KVM: arm64: nv: Request vPE doorbell upon nested ERET to L2
KVM: arm64: nv: Respect virtual HCR_EL2.TWx setting
KVM: arm64: nv: Add Maintenance Interrupt emulation
KVM: arm64: nv: Handle L2->L1 transition on interrupt injection
KVM: arm64: nv: Nested GICv3 emulation
KVM: arm64: nv: Sanitise ICH_HCR_EL2 accesses
KVM: arm64: nv: Plumb handling of GICv3 EL2 accesses
KVM: arm64: nv: Add ICH_*_EL2 registers to vpcu_sysreg
KVM: arm64: nv: Load timer before the GIC
arm64: sysreg: Add layout for ICH_MISR_EL2
arm64: sysreg: Add layout for ICH_VTR_EL2
arm64: sysreg: Add layout for ICH_HCR_EL2
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.15
1. Add support for Exynos USI v1 serial engines. Drivers already
supported newer IP blocks - USI v2 - present in Exynos850 and newer.
A bit older ARM64 designs, like Exynos8895 use older USI v1 block.
2. Add Exynos ACPM (Alive Clock and Power Manager) protocol driver
for Google GS101 SoC. ACPM protocol allows communication between the
power management firmware and other embedded processors.
3. Exynos2200: Add PMU, ChipID and SYSREG Devicetree bindings.
4. Exynos7870: Add PMU and ChipID Devicetree bindings.
5. Various cleanups.
* tag 'samsung-drivers-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: exynos-usi: Drop unnecessary status from example
soc: samsung: include linux/array_size.h where needed
soc: samsung: exynos-chipid: add support for exynos7870
dt-bindings: soc: samsung: exynos-pmu: add exynos7870-pmu compatible
dt-bindings: hwinfo: samsung,exynos-chipid: add exynos7870-chipid compatible
soc: samsung: exynos-chipid: add exynos2200 SoC support
dt-bindings: hwinfo: samsung,exynos-chipid: add exynos2200 compatible
dt-bindings: soc: samsung: exynos-pmu: add exynos2200 compatible
dt-bindings: soc: samsung: exynos-sysreg: add sysreg compatibles for exynos2200
firmware: Exynos ACPM: Fix spelling mistake "Faile" -> "Failed"
MAINTAINERS: add entry for the Samsung Exynos ACPM mailbox protocol
firmware: add Exynos ACPM protocol driver
dt-bindings: firmware: add google,gs101-acpm-ipc
soc: samsung: usi: implement support for USIv1 and exynos8895
soc: samsung: usi: add a routine for unconfiguring the ip
dt-bindings: soc: samsung: usi: add USIv1 and samsung,exynos8895-usi
soc: samsung: Use syscon_regmap_lookup_by_phandle_args
Link: https://lore.kernel.org/r/20250309185601.10616-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
