summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2023-04-21Merge tag 'nf-23-04-21' of ↵Jakub Kicinski1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Set on IPS_CONFIRMED before change_status() otherwise EBUSY is bogusly hit. This bug was introduced in the 6.3 release cycle. 2) Fix nfnetlink_queue conntrack support: Set/dump timeout accordingly for unconfirmed conntrack entries. Make sure this is done after IPS_CONFIRMED is set on. This is an old bug, it happens since the introduction of this feature. * tag 'nf-23-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: conntrack: fix wrong ct->timeout value netfilter: conntrack: restore IPS_CONFIRMED out of nf_conntrack_hash_check_insert() ==================== Link: https://lore.kernel.org/r/20230421105700.325438-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-21Merge tag 'wireless-next-2023-04-21' of ↵Jakub Kicinski3-43/+60
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.4 Most likely the last -next pull request for v6.4. We have changes all over. rtw88 now supports SDIO bus and iwlwifi continues to work on Wi-Fi 7 support. Not much stack changes this time. Major changes: cfg80211/mac80211 - fix some Fine Time Measurement (FTM) frames not being bufferable - flush frames before key removal to avoid potential unencrypted transmission depending on the hardware design iwlwifi - preparation for Wi-Fi 7 EHT and multi-link support rtw88 - SDIO bus support - RTL8822BS, RTL8822CS and RTL8821CS SDIO chipset support rtw89 - framework firmware backwards compatibility brcmfmac - Cypress 43439 SDIO support mt76 - mt7921 P2P support - mt7996 mesh A-MSDU support - mt7996 EHT support - mt7996 coredump support wcn36xx - support for pronto v3 hardware ath11k - PCIe DeviceTree bindings - WCN6750: enable SAR support ath10k - convert DeviceTree bindings to YAML * tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (261 commits) wifi: rtw88: Update spelling in main.h wifi: airo: remove ISA_DMA_API dependency wifi: rtl8xxxu: Simplify setting the initial gain wifi: rtl8xxxu: Add rtl8xxxu_write{8,16,32}_{set,clear} wifi: rtl8xxxu: Don't print the vendor/product/serial wifi: rtw88: Fix memory leak in rtw88_usb wifi: rtw88: call rtw8821c_switch_rf_set() according to chip variant wifi: rtw88: set pkg_type correctly for specific rtw8821c variants wifi: rtw88: rtw8821c: Fix rfe_option field width wifi: rtw88: usb: fix priority queue to endpoint mapping wifi: rtw88: 8822c: add iface combination wifi: rtw88: handle station mode concurrent scan with AP mode wifi: rtw88: prevent scan abort with other VIFs wifi: rtw88: refine reserved page flow for AP mode wifi: rtw88: disallow PS during AP mode wifi: rtw88: 8822c: extend reserved page number wifi: rtw88: add port switch for AP mode wifi: rtw88: add bitmap for dynamic port settings wifi: rtw89: mac: use regular int as return type of DLE buffer request wifi: mac80211: remove return value check of debugfs_create_dir() ... ==================== Link: https://lore.kernel.org/r/20230421104726.800BCC433D2@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-21spi: Add TPM HW flow flagKrishna Yarlagadda1-3/+13
TPM specification [1] defines flow control over SPI. Client device can insert a wait state on MISO when address is transmitted by controller on MOSI. Detecting the wait state in software is only possible for full duplex controllers. For controllers that support only half- duplex, the wait state detection needs to be implemented in hardware. Add a flag SPI_TPM_HW_FLOW for TPM device to set when software flow control is not possible and hardware flow control is expected from SPI controller. Reference: [1] https://trustedcomputinggroup.org/resource/pc-client-platform-tpm -profile-ptp-specification/ Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Link: https://lore.kernel.org/r/20230421091309.2672-2-kyarlagadda@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-04-21posix-cpu-timers: Implement the missing timer_wait_running callbackThomas Gleixner1-6/+11
For some unknown reason the introduction of the timer_wait_running callback missed to fixup posix CPU timers, which went unnoticed for almost four years. Marco reported recently that the WARN_ON() in timer_wait_running() triggers with a posix CPU timer test case. Posix CPU timers have two execution models for expiring timers depending on CONFIG_POSIX_CPU_TIMERS_TASK_WORK: 1) If not enabled, the expiry happens in hard interrupt context so spin waiting on the remote CPU is reasonably time bound. Implement an empty stub function for that case. 2) If enabled, the expiry happens in task work before returning to user space or guest mode. The expired timers are marked as firing and moved from the timer queue to a local list head with sighand lock held. Once the timers are moved, sighand lock is dropped and the expiry happens in fully preemptible context. That means the expiring task can be scheduled out, migrated, interrupted etc. So spin waiting on it is more than suboptimal. The timer wheel has a timer_wait_running() mechanism for RT, which uses a per CPU timer-base expiry lock which is held by the expiry code and the task waiting for the timer function to complete blocks on that lock. This does not work in the same way for posix CPU timers as there is no timer base and expiry for process wide timers can run on any task belonging to that process, but the concept of waiting on an expiry lock can be used too in a slightly different way: - Add a mutex to struct posix_cputimers_work. This struct is per task and used to schedule the expiry task work from the timer interrupt. - Add a task_struct pointer to struct cpu_timer which is used to store a the task which runs the expiry. That's filled in when the task moves the expired timers to the local expiry list. That's not affecting the size of the k_itimer union as there are bigger union members already - Let the task take the expiry mutex around the expiry function - Let the waiter acquire a task reference with rcu_read_lock() held and block on the expiry mutex This avoids spin-waiting on a task which might not even be on a CPU and works nicely for RT too. Fixes: ec8f954a40da ("posix-timers: Use a callback for cancel synchronization on PREEMPT_RT") Reported-by: Marco Elver <elver@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Marco Elver <elver@google.com> Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87zg764ojw.ffs@tglx
2023-04-21Merge branch irq/gic-6.4 into irq/irqchip-nextMarc Zyngier2-6/+18
* irq/gic-6.4: : . : Collection of GIC/GICv3 fixes and cleanups : : - Workaround for the nvidia T241 chip that gets confused : in 3 and 4 socket configurations, leading to the GIC : malfunctionning in some contexts : : - Drop support for non-firmware driven GIC configurarations : now that the old ARM11MP Cavium board is gone : : - Workaround for the Rockchip 3588 chip that doesn't : correctly deal with the shareability attributes. : . irqchip/gic-v3: Add Rockchip 3588001 erratum workaround irqchip/gicv3: Workaround for NVIDIA erratum T241-FABRIC-4 irqchip/gic: Drop support for board files Signed-off-by: Marc Zyngier <maz@kernel.org>
2023-04-21sched: Fix performance regression introduced by mm_cidMathieu Desnoyers3-8/+82
Introduce per-mm/cpu current concurrency id (mm_cid) to fix a PostgreSQL sysbench regression reported by Aaron Lu. Keep track of the currently allocated mm_cid for each mm/cpu rather than freeing them immediately on context switch. This eliminates most atomic operations when context switching back and forth between threads belonging to different memory spaces in multi-threaded scenarios (many processes, each with many threads). The per-mm/per-cpu mm_cid values are serialized by their respective runqueue locks. Thread migration is handled by introducing invocation to sched_mm_cid_migrate_to() (with destination runqueue lock held) in activate_task() for migrating tasks. If the destination cpu's mm_cid is unset, and if the source runqueue is not actively using its mm_cid, then the source cpu's mm_cid is moved to the destination cpu on migration. Introduce a task-work executed periodically, similarly to NUMA work, which delays reclaim of cid values when they are unused for a period of time. Keep track of the allocation time for each per-cpu cid, and let the task work clear them when they are observed to be older than SCHED_MM_CID_PERIOD_NS and unused. This task work also clears all mm_cids which are greater or equal to the Hamming weight of the mm cidmask to keep concurrency ids compact. Because we want to ensure the mm_cid converges towards the smaller values as migrations happen, the prior optimization that was done when context switching between threads belonging to the same mm is removed, because it could delay the lazy release of the destination runqueue mm_cid after it has been replaced by a migration. Removing this prior optimization is not an issue performance-wise because the introduced per-mm/per-cpu mm_cid tracking also covers this more specific case. Fixes: af7f588d8f73 ("sched: Introduce per-memory-map concurrency ID") Reported-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Aaron Lu <aaron.lu@intel.com> Link: https://lore.kernel.org/lkml/20230327080502.GA570847@ziqianlu-desk2/
2023-04-21Merge branch 'v6.3-rc7'Peter Zijlstra43-83/+267
Sync with the urgent patches; in particular: a53ce18cacb4 ("sched/fair: Sanitize vruntime of entity being migrated") Signed-off-by: Peter Zijlstra <peterz@infradead.org>
2023-04-21net/packet: support mergeable feature of virtioJianfeng Tan1-0/+1
Packet sockets, like tap, can be used as the backend for kernel vhost. In packet sockets, virtio net header size is currently hardcoded to be the size of struct virtio_net_hdr, which is 10 bytes; however, it is not always the case: some virtio features, such as mrg_rxbuf, need virtio net header to be 12-byte long. Mergeable buffers, as a virtio feature, is worthy of supporting: packets that are larger than one-mbuf size will be dropped in vhost worker's handle_rx if mrg_rxbuf feature is not used, but large packets cannot be avoided and increasing mbuf's size is not economical. With this virtio feature enabled by virtio-user, packet sockets with hardcoded 10-byte virtio net header will parse mac head incorrectly in packet_snd by taking the last two bytes of virtio net header as part of mac header. This incorrect mac header parsing will cause packet to be dropped due to invalid ether head checking in later under-layer device packet receiving. By adding extra field vnet_hdr_sz with utilizing holes in struct packet_sock to record currently used virtio net header size and supporting extra sockopt PACKET_VNET_HDR_SZ to set specified vnet_hdr_sz, packet sockets can know the exact length of virtio net header that virtio user gives. In packet_snd, tpacket_snd and packet_recvmsg, instead of using hardcoded virtio net header size, it can get the exact vnet_hdr_sz from corresponding packet_sock, and parse mac header correctly based on this information to avoid the packets being mistakenly dropped. Signed-off-by: Jianfeng Tan <henry.tjf@antgroup.com> Co-developed-by: Anqi Shen <amy.saq@antgroup.com> Signed-off-by: Anqi Shen <amy.saq@antgroup.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21ALSA: pcm: rewrite snd_pcm_playback_silence()Oswald Buddenhagen2-10/+15
The auto-silencer supports two modes: "thresholded" to fill up "just enough", and "top-up" to fill up "as much as possible". The two modes used rather distinct code paths, which this patch unifies. The only remaining distinction is how much we actually want to fill. This fixes a bug in thresholded mode, where we failed to use new_hw_ptr, resulting in under-fill. Top-up mode is now more well-behaved and much easier to understand in corner cases. This also updates comments in the proximity of silencing-related data structures. Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20230420113324.877164-1-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-04-21Merge branch kvm-arm64/smccc-filtering into kvmarm-master/nextMarc Zyngier2-3/+12
* kvm-arm64/smccc-filtering: : . : SMCCC call filtering and forwarding to userspace, courtesy of : Oliver Upton. From the cover letter: : : "The Arm SMCCC is rather prescriptive in regards to the allocation of : SMCCC function ID ranges. Many of the hypercall ranges have an : associated specification from Arm (FF-A, PSCI, SDEI, etc.) with some : room for vendor-specific implementations. : : The ever-expanding SMCCC surface leaves a lot of work within KVM for : providing new features. Furthermore, KVM implements its own : vendor-specific ABI, with little room for other implementations (like : Hyper-V, for example). Rather than cramming it all into the kernel we : should provide a way for userspace to handle hypercalls." : . KVM: selftests: Fix spelling mistake "KVM_HYPERCAL_EXIT_SMC" -> "KVM_HYPERCALL_EXIT_SMC" KVM: arm64: Test that SMC64 arch calls are reserved KVM: arm64: Prevent userspace from handling SMC64 arch range KVM: arm64: Expose SMC/HVC width to userspace KVM: selftests: Add test for SMCCC filter KVM: selftests: Add a helper for SMCCC calls with SMC instruction KVM: arm64: Let errors from SMCCC emulation to reach userspace KVM: arm64: Return NOT_SUPPORTED to guest for unknown PSCI version KVM: arm64: Introduce support for userspace SMCCC filtering KVM: arm64: Add support for KVM_EXIT_HYPERCALL KVM: arm64: Use a maple tree to represent the SMCCC filter KVM: arm64: Refactor hvc filtering to support different actions KVM: arm64: Start handling SMCs from EL1 KVM: arm64: Rename SMC/HVC call handler to reflect reality KVM: arm64: Add vm fd device attribute accessors KVM: arm64: Add a helper to check if a VM has ran once KVM: x86: Redefine 'longmode' as a flag for KVM_EXIT_HYPERCALL Signed-off-by: Marc Zyngier <maz@kernel.org>
2023-04-21Merge branch kvm-arm64/timer-vm-offsets into kvmarm-master/nextMarc Zyngier4-6/+33
* kvm-arm64/timer-vm-offsets: (21 commits) : . : This series aims at satisfying multiple goals: : : - allow a VMM to atomically restore a timer offset for a whole VM : instead of updating the offset each time a vcpu get its counter : written : : - allow a VMM to save/restore the physical timer context, something : that we cannot do at the moment due to the lack of offsetting : : - provide a framework that is suitable for NV support, where we get : both global and per timer, per vcpu offsetting, and manage : interrupts in a less braindead way. : : Conflict resolution involves using the new per-vcpu config lock instead : of the home-grown timer lock. : . KVM: arm64: Handle 32bit CNTPCTSS traps KVM: arm64: selftests: Augment existing timer test to handle variable offset KVM: arm64: selftests: Deal with spurious timer interrupts KVM: arm64: selftests: Add physical timer registers to the sysreg list KVM: arm64: nv: timers: Support hyp timer emulation KVM: arm64: nv: timers: Add a per-timer, per-vcpu offset KVM: arm64: Document KVM_ARM_SET_CNT_OFFSETS and co KVM: arm64: timers: Abstract the number of valid timers per vcpu KVM: arm64: timers: Fast-track CNTPCT_EL0 trap handling KVM: arm64: Elide kern_hyp_va() in VHE-specific parts of the hypervisor KVM: arm64: timers: Move the timer IRQs into arch_timer_vm_data KVM: arm64: timers: Abstract per-timer IRQ access KVM: arm64: timers: Rationalise per-vcpu timer init KVM: arm64: timers: Allow save/restoring of the physical timer KVM: arm64: timers: Allow userspace to set the global counter offset KVM: arm64: Expose {un,}lock_all_vcpus() to the rest of KVM KVM: arm64: timers: Allow physical offset without CNTPOFF_EL2 KVM: arm64: timers: Use CNTPOFF_EL2 to offset the physical timer arm64: Add HAS_ECV_CNTPOFF capability arm64: Add CNTPOFF_EL2 register definition ... Signed-off-by: Marc Zyngier <maz@kernel.org>
2023-04-21pds_core: publish events to the clientsShannon Nelson1-0/+2
When the Core device gets an event from the device, or notices the device FW to be up or down, it needs to send those events on to the clients that have an event handler. Add the code to pass along the events to the clients. The entry points pdsc_register_notify() and pdsc_unregister_notify() are EXPORTed for other drivers that want to listen for these events. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: add the aux client APIShannon Nelson2-0/+8
Add the client API operations for running adminq commands. The core registers the client with the FW, then the client has a context for requesting adminq services. We expect to add additional operations for other clients, including requesting additional private adminqs and IRQs, but don't have the need yet. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: add auxiliary_bus devicesShannon Nelson2-0/+15
An auxiliary_bus device is created for each vDPA type VF at VF probe and destroyed at VF remove. The aux device name comes from the driver name + VIF type + the unique id assigned at PCI probe. The VFs are always removed on PF remove, so there should be no issues with VFs trying to access missing PF structures. The auxiliary_device names will look like "pds_core.vDPA.nn" where 'nn' is the VF's uid. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: set up the VIF definitions and defaultsShannon Nelson1-0/+19
The Virtual Interfaces (VIFs) supported by the DSC's configuration (vDPA, Eth, RDMA, etc) are reported in the dev_ident struct and made visible in debugfs. At this point only vDPA is supported in this driver so we only setup devices for that feature. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: Add adminq processing and commandsShannon Nelson1-1/+10
Add the service routines for submitting and processing the adminq messages and for handling notifyq events. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: set up device and adminqShannon Nelson1-0/+638
Set up the basic adminq and notifyq queue structures. These are used mostly by the client drivers for feature configuration. These are essentially the same adminq and notifyq as in the ionic driver. Part of this includes querying for device identity and FW information, so we can make that available to devlink dev info. $ devlink dev info pci/0000:b5:00.0 pci/0000:b5:00.0: driver pds_core serial_number FLM18420073 versions: fixed: asic.id 0x0 asic.rev 0x0 running: fw 1.51.0-73 stored: fw.goldfw 1.15.9-C-22 fw.mainfwa 1.60.0-73 fw.mainfwb 1.60.0-57 Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: add devcmd device interfacesShannon Nelson2-0/+193
The devcmd interface is the basic connection to the device through the PCI BAR for low level identification and command services. This does the early device initialization and finds the identity data, and adds devcmd routines to be used by later driver bits. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: initial framework for pds_core PF driverShannon Nelson2-0/+585
This is the initial PCI driver framework for the new pds_core device driver and its family of devices. This does the very basics of registering for the new PF PCI device 1dd8:100c, setting up debugfs entries, and registering with devlink. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21bridge: Allow setting per-{Port, VLAN} neighbor suppression stateIdo Schimmel1-0/+1
Add a new bridge port attribute that allows user space to enable per-{Port, VLAN} neighbor suppression. Example: # bridge -d -j -p link show dev swp1 | jq '.[]["neigh_vlan_suppress"]' false # bridge link set dev swp1 neigh_vlan_suppress on # bridge -d -j -p link show dev swp1 | jq '.[]["neigh_vlan_suppress"]' true # bridge link set dev swp1 neigh_vlan_suppress off # bridge -d -j -p link show dev swp1 | jq '.[]["neigh_vlan_suppress"]' false Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21bridge: vlan: Allow setting VLAN neighbor suppression stateIdo Schimmel1-0/+1
Add a new VLAN attribute that allows user space to set the neighbor suppression state of the port VLAN. Example: # bridge -d -j -p vlan show dev swp1 vid 10 | jq '.[]["vlans"][]["neigh_suppress"]' false # bridge vlan set vid 10 dev swp1 neigh_suppress on # bridge -d -j -p vlan show dev swp1 vid 10 | jq '.[]["vlans"][]["neigh_suppress"]' true # bridge vlan set vid 10 dev swp1 neigh_suppress off # bridge -d -j -p vlan show dev swp1 vid 10 | jq '.[]["vlans"][]["neigh_suppress"]' false # bridge vlan set vid 10 dev br0 neigh_suppress on Error: bridge: Can't set neigh_suppress for non-port vlans. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21bridge: Add internal flags for per-{Port, VLAN} neighbor suppressionIdo Schimmel1-0/+1
Add two internal flags that will be used to enable / disable per-{Port, VLAN} neighbor suppression: 1. 'BR_NEIGH_VLAN_SUPPRESS': A per-port flag used to indicate that per-{Port, VLAN} neighbor suppression is enabled on the bridge port. When set, 'BR_NEIGH_SUPPRESS' has no effect. 2. 'BR_VLFLAG_NEIGH_SUPPRESS_ENABLED': A per-VLAN flag used to indicate that neighbor suppression is enabled on the given VLAN. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21sctp: delete the nested flexible array payloadXin Long1-1/+1
This patch deletes the flexible-array payload[] from the structure sctp_datahdr to avoid some sparse warnings: # make C=2 CF="-Wflexible-array-nested" M=./net/sctp/ net/sctp/socket.c: note: in included file (through include/net/sctp/structs.h, include/net/sctp/sctp.h): ./include/linux/sctp.h:230:29: warning: nested flexible array This member is not even used anywhere. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21sctp: delete the nested flexible array hmacXin Long1-1/+1
This patch deletes the flexible-array hmac[] from the structure sctp_authhdr to avoid some sparse warnings: # make C=2 CF="-Wflexible-array-nested" M=./net/sctp/ net/sctp/auth.c: note: in included file (through include/net/sctp/structs.h, include/net/sctp/sctp.h): ./include/linux/sctp.h:735:29: warning: nested flexible array Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21sctp: delete the nested flexible array peer_initXin Long1-1/+1
This patch deletes the flexible-array peer_init[] from the structure sctp_cookie to avoid some sparse warnings: # make C=2 CF="-Wflexible-array-nested" M=./net/sctp/ net/sctp/sm_make_chunk.c: note: in included file (through include/net/sctp/sctp.h): ./include/net/sctp/structs.h:1588:28: warning: nested flexible array ./include/net/sctp/structs.h:343:28: warning: nested flexible array Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21sctp: delete the nested flexible array variableXin Long1-2/+2
This patch deletes the flexible-array variable[] from the structure sctp_sackhdr and sctp_errhdr to avoid some sparse warnings: # make C=2 CF="-Wflexible-array-nested" M=./net/sctp/ net/sctp/sm_statefuns.c: note: in included file (through include/net/sctp/structs.h, include/net/sctp/sctp.h): ./include/linux/sctp.h:451:28: warning: nested flexible array ./include/linux/sctp.h:393:29: warning: nested flexible array Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21sctp: delete the nested flexible array skipXin Long2-4/+4
This patch deletes the flexible-array skip[] from the structure sctp_ifwdtsn/fwdtsn_hdr to avoid some sparse warnings: # make C=2 CF="-Wflexible-array-nested" M=./net/sctp/ net/sctp/stream_interleave.c: note: in included file (through include/net/sctp/structs.h, include/net/sctp/sctp.h): ./include/linux/sctp.h:611:32: warning: nested flexible array ./include/linux/sctp.h:628:33: warning: nested flexible array Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21sctp: delete the nested flexible array paramsXin Long2-7/+7
This patch deletes the flexible-array params[] from the structure sctp_inithdr, sctp_addiphdr and sctp_reconf_chunk to avoid some sparse warnings: # make C=2 CF="-Wflexible-array-nested" M=./net/sctp/ net/sctp/input.c: note: in included file (through include/net/sctp/structs.h, include/net/sctp/sctp.h): ./include/linux/sctp.h:278:29: warning: nested flexible array ./include/linux/sctp.h:675:30: warning: nested flexible array This warning is reported if a structure having a flexible array member is included by other structures. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21virtio_ring: add a struct device forward declarationShunsuke Mie1-0/+1
The virtio_ring header file uses the struct device without a forward declaration. Signed-off-by: Shunsuke Mie <mie@igel.co.jp> Message-Id: <20230417022037.917668-1-mie@igel.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-21virtio-vdpa: add VIRTIO_F_NOTIFICATION_DATA feature supportAlvaro Karsz1-0/+9
Add VIRTIO_F_NOTIFICATION_DATA support for vDPA transport. If this feature is negotiated, the driver passes extra data when kicking a virtqueue. A device that offers this feature needs to implement the kick_vq_with_data callback. kick_vq_with_data receives the vDPA device and data. data includes: 16 bits vqn and 16 bits next available index for split virtqueues. 16 bits vqs, 15 least significant bits of next available index and 1 bit next_wrap for packed virtqueues. This patch follows a patch [1] by Viktor Prutyanov which adds support for the MMIO, channel I/O and modern PCI transports. Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Message-Id: <20230413081855.36643-3-alvaro.karsz@solid-run.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2023-04-21virtio: add VIRTIO_F_NOTIFICATION_DATA feature supportViktor Prutyanov2-0/+8
According to VirtIO spec v1.2, VIRTIO_F_NOTIFICATION_DATA feature indicates that the driver passes extra data along with the queue notifications. In a split queue case, the extra data is 16-bit available index. In a packed queue case, the extra data is 1-bit wrap counter and 15-bit available index. Add support for this feature for MMIO, channel I/O and modern PCI transports. Signed-off-by: Viktor Prutyanov <viktor@daynix.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Message-Id: <20230413081855.36643-2-alvaro.karsz@solid-run.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-21vringh: address kdoc warningsSimon Horman1-2/+15
Address some minor kdoc warnings in vring.h. * Place kdoc for 'struct vringh_config_ops' immediately before the structure * Add missing documentation of members of 'vringh_iov' and 'vringh_kiov' Warnings flagged by: $ ./scripts/kernel-doc -none include/linux/vringh.h include/linux/vringh.h:68: error: Cannot parse struct or union! include/linux/vringh.h:92: warning: Function parameter or member 'iov' not described in 'vringh_iov' include/linux/vringh.h:92: warning: Function parameter or member 'consumed' not described in 'vringh_iov' include/linux/vringh.h:92: warning: Function parameter or member 'i' not described in 'vringh_iov' include/linux/vringh.h:92: warning: Function parameter or member 'used' not described in 'vringh_iov' include/linux/vringh.h:92: warning: Function parameter or member 'max_num' not described in 'vringh_iov' include/linux/vringh.h:104: warning: Function parameter or member 'iov' not described in 'vringh_kiov' include/linux/vringh.h:104: warning: Function parameter or member 'consumed' not described in 'vringh_kiov' include/linux/vringh.h:104: warning: Function parameter or member 'i' not described in 'vringh_kiov' include/linux/vringh.h:104: warning: Function parameter or member 'used' not described in 'vringh_kiov' include/linux/vringh.h:104: warning: Function parameter or member 'max_num' not described in 'vringh_kiov' Signed-off-by: Simon Horman <horms@kernel.org> Message-Id: <20230331-vhost-fixes-v1-2-1f046e735b9e@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-21vdpa: address kdoc warningsSimon Horman1-3/+11
This patch addresses the following minor kdoc problems. * Incorrect spelling of 'callback' and 'notification' * Unrecognised kdoc format for 'struct vdpa_map_file' * Missing documentation of 'get_vendor_vq_stats' member of 'struct vdpa_config_ops' * Missing documentation of 'max_supported_vqs' and 'supported_features' members of 'struct vdpa_mgmt_dev' Most of these problems were flagged by: $ ./scripts/kernel-doc -Werror -none include/linux/vdpa.h include/linux/vdpa.h:20: warning: expecting prototype for struct vdpa_calllback. Prototype was for struct vdpa_callback instead include/linux/vdpa.h:117: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Corresponding file area for device memory mapping include/linux/vdpa.h:357: warning: Function parameter or member 'get_vendor_vq_stats' not described in 'vdpa_config_ops' include/linux/vdpa.h:518: warning: Function parameter or member 'supported_features' not described in 'vdpa_mgmt_dev' include/linux/vdpa.h:518: warning: Function parameter or member 'max_supported_vqs' not described in 'vdpa_mgmt_dev' The misspelling of 'notification' was flagged by: $ ./scripts/checkpatch.pl --codespell --showfile --strict -f include/linux/vdpa.h include/linux/vdpa.h:171: CHECK: 'notifcation' may be misspelled - perhaps 'notification'? ... Signed-off-by: Simon Horman <horms@kernel.org> Message-Id: <20230331-vhost-fixes-v1-1-1f046e735b9e@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2023-04-21vringh: support VA with iotlbStefano Garzarella1-0/+9
vDPA supports the possibility to use user VA in the iotlb messages. So, let's add support for user VA in vringh to use it in the vDPA simulators. Acked-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20230404131716.45855-1-sgarzare@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-21vdpa: add bind_mm/unbind_mm callbacksStefano Garzarella1-0/+10
These new optional callbacks is used to bind/unbind the device to a specific address space so the vDPA framework can use VA when these callbacks are implemented. Suggested-by: Jason Wang <jasowang@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20230404131326.44403-2-sgarzare@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-21vdpa: Add eventfd for the vdpa callbackXie Yongji1-0/+6
Add eventfd for the vdpa callback so that user can signal it directly instead of triggering the callback. It will be used for vhost-vdpa case. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Message-Id: <20230323053043.35-9-xieyongji@bytedance.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2023-04-21vdpa: Add set/get_vq_affinity callbacks in vdpa_config_opsXie Yongji1-0/+13
This introduces set/get_vq_affinity callbacks in vdpa_config_ops to support virtqueue affinity management for vdpa device drivers. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230323053043.35-3-xieyongji@bytedance.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-21virtio_ring: Use const to annotate read-only pointer paramsFeng Liu1-7/+7
Add const to make the read-only pointer parameters clear, similar to many existing functions. To implement this change, the commit also introduces the use of `container_of_const` to implement `to_vvq`, which ensures the const-ness of read-only parameters and avoids accidental modification of their members. Signed-off-by: Feng Liu <feliu@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Gavin Li <gavinl@nvidia.com> Reviewed-by: Bodong Wang <bodong@nvidia.com> Message-Id: <20230310053428.3376-4-feliu@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-21virtio: Reorder fields in 'struct virtqueue'Christophe JAILLET1-1/+1
Group some variables based on their sizes to reduce hole and avoid padding. On x86_64, this shrinks the size of 'struct virtqueue' from 72 to 68 bytes. It saves a few bytes of memory. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Message-Id: <8f3d2e49270a2158717e15008e7ed7228196ba02.1676707807.git.christophe.jaillet@wanadoo.fr> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Peter Lafreniere <peter@n8pjl.ca> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2023-04-21mac80211: use the new drop reasons infrastructureJohannes Berg1-0/+12
It can be really hard to analyse or debug why packets are going missing in mac80211, so add the needed infrastructure to use use the new per-subsystem drop reasons. We actually use two drop reason subsystems here because of the different handling of frames that are dropped but still go to monitor for old versions of hostapd, and those that are just completely unusable (e.g. crypto failed.) Annotate a few reasons here just to illustrate this, we'll need to go through and annotate more of them later. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-21net: extend drop reasons for multiple subsystemsJohannes Berg2-4/+41
Extend drop reasons to make them usable by subsystems other than core by reserving the high 16 bits for a new subsystem ID, of which 0 of course is used for the existing reasons immediately. To still be able to have string reasons, restructure that code a bit to make the loopup under RCU, the only user of this (right now) is drop_monitor. Link: https://lore.kernel.org/netdev/00659771ed54353f92027702c5bbb84702da62ce.camel@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-21net: move dropreason.h to dropreason-core.hJohannes Berg4-6/+7
This will, after the next patch, hold only the core drop reasons and minimal infrastructure. Fix a small kernel-doc issue while at it, to avoid the move triggering a checker. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-21ipv6: add icmpv6_error_anycast_as_unicast for ICMPv6Mahesh Bandewar1-0/+1
ICMPv6 error packets are not sent to the anycast destinations and this prevents things like traceroute from working. So create a setting similar to ECHO when dealing with Anycast sources (icmpv6_echo_ignore_anycast). Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20230419013238.2691167-1-maheshb@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-21kill the last remaining user of proc_ns_fget()Al Viro1-1/+0
lookups by descriptor are better off closer to syscall surface... Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-04-21fs: introduce lock_rename_child() helperAl Viro1-0/+1
Pass the dentry of a source file and the dentry of a destination directory to lock parent inodes for rename. As soon as this function returns, ->d_parent of the source file dentry is stable and inodes are properly locked for calling vfs-rename. This helper is needed for ksmbd server. rename request of SMB protocol has to rename an opened file, no matter which directory it's in. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-04-21ksmbd: remove internal.h includeNamjae Jeon1-0/+2
Since vfs_path_lookup is exported, It should not be internal. Move vfs_path_lookup prototype in internal.h to linux/namei.h. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-04-21net: skbuff: update and rename __kfree_skb_defer()Jakub Kicinski1-1/+1
__kfree_skb_defer() uses the old naming where "defer" meant slab bulk free/alloc APIs. In the meantime we also made __kfree_skb_defer() feed the per-NAPI skb cache, which implies bulk APIs. So take away the 'defer' and add 'napi'. While at it add a drop reason. This only matters on the tx_action path, if the skb has a frag_list. But getting rid of a SKB_DROP_REASON_NOT_SPECIFIED seems like a net benefit so why not. Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://lore.kernel.org/r/20230420020005.815854-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-21flow_dissector: Address kdoc warningsSimon Horman1-18/+20
Address a number of warnings flagged by ./scripts/kernel-doc -none include/net/flow_dissector.h include/net/flow_dissector.h:23: warning: Function parameter or member 'addr_type' not described in 'flow_dissector_key_control' include/net/flow_dissector.h:23: warning: Function parameter or member 'flags' not described in 'flow_dissector_key_control' include/net/flow_dissector.h:46: warning: Function parameter or member 'padding' not described in 'flow_dissector_key_basic' include/net/flow_dissector.h:145: warning: Function parameter or member 'tipckey' not described in 'flow_dissector_key_addrs' include/net/flow_dissector.h:157: warning: cannot understand function prototype: 'struct flow_dissector_key_arp ' include/net/flow_dissector.h:171: warning: cannot understand function prototype: 'struct flow_dissector_key_ports ' include/net/flow_dissector.h:203: warning: cannot understand function prototype: 'struct flow_dissector_key_icmp ' Also improve indentation on adjacent lines to those changed to address the above. No functional changes intended. Signed-off-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230419-flow-dissector-kdoc-v1-1-1aa0cca1118b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-21page_pool: unlink from napi during destroyJakub Kicinski1-0/+5
Jesper points out that we must prevent recycling into cache after page_pool_destroy() is called, because page_pool_destroy() is not synchronized with recycling (some pages may still be outstanding when destroy() gets called). I assumed this will not happen because NAPI can't be scheduled if its page pool is being destroyed. But I missed the fact that NAPI may get reused. For instance when user changes ring configuration driver may allocate a new page pool, stop NAPI, swap, start NAPI, and then destroy the old pool. The NAPI is running so old page pool will think it can recycle to the cache, but the consumer at that point is the destroy() path, not NAPI. To avoid extra synchronization let the drivers do "unlinking" during the "swap" stage while NAPI is indeed disabled. Fixes: 8c48eea3adf3 ("page_pool: allow caching from safely localized NAPI") Reported-by: Jesper Dangaard Brouer <jbrouer@redhat.com> Link: https://lore.kernel.org/all/e8df2654-6a5b-3c92-489d-2fe5e444135f@redhat.com/ Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/r/20230419182006.719923-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-21net/mlx5: Update op_mode to op_mod for port selectionRoi Dayan1-1/+1
To be consistent with the other enum keys use OP_MOD instead of OP_MODE. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 13:31:22 +0300