| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance optimized
for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
* tag 'soc-fsl-next-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: enable acpi support in RCPM driver
Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
tty: serial: ucc_uart: replace qe_io{read,write}* wrappers by generic io{read,write}*
soc: fsl: qe: replace qe_io{read,write}* wrappers by generic io{read,write}*
soc: fsl: guts: fix comment syntax in file
soc: fsl: guts: remove unneeded semicolon
soc: fsl: qe: Use DEFINE_SPINLOCK() for spinlock
soc: fsl: qbman: Delete useless kfree code
soc: fsl: qbman: Ensure device cleanup is run for kexec
Link: https://lore.kernel.org/r/20210409205719.27927-1-leoyang.li@nxp.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into arm/drivers
arm64: soc: ZynqMP SoC changes for v5.13
- Fix firmware removal path
- Cleanup eemi doc and *ops()
* tag 'zynqmp-soc-for-v5.13' of https://github.com/Xilinx/linux-xlnx:
firmware: xilinx: Remove zynqmp_pm_get_eemi_ops() in IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE)
firmware: xilinx: Fix dereferencing freed memory
Link: https://lore.kernel.org/r/a44f8e9f-cea7-57ef-c3bc-10f5f5e064fc@monstr.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
In 'bpf_ringbuf_reserve()' we require the flag to '0' at the moment.
For 'bpf_ringbuf_{discard,submit,output}' a flag of '0' might send a
notification to the process if needed.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210412192434.944343-1-pctammela@mojatatu.com
|
|
Add an argument to nfs_revalidate_inode() to allow callers to specify
which attributes they need to check for validity.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix NAT IPv6 offload in the flowtable.
2) icmpv6 is printed as unknown in /proc/net/nf_conntrack.
3) Use div64_u64() in nft_limit, from Eric Dumazet.
4) Use pre_exit to unregister ebtables and arptables hooks,
from Florian Westphal.
5) Fix out-of-bound memset in x_tables compat match/target,
also from Florian.
6) Clone set elements expression to ensure proper initialization.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce the ability for kernel ULPs to adjust the minimum RNR Retry
timer. The INIT -> RTR transition executed by RDMA CM will be used for
this adjustment. This avoids an additional ib_modify_qp() call.
rdma_set_min_rnr_timer() must be called before the call to rdma_connect()
on the active side and before the call to rdma_accept() on the passive
side.
The default value of RNR Retry timer is zero, which translates to 655
ms. When the receiver is not ready to accept a send messages, it encodes
the RNR Retry timer value in the NAK. The requestor will then wait at
least the specified time value before retrying the send.
The 5-bit value to be supplied to the rdma_set_min_rnr_timer() is
documented in IBTA Table 45: "Encoding for RNR NAK Timer Field".
Link: https://lore.kernel.org/r/1617216194-12890-2-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Since commit fee2d546414d ("net: phy: marvell: mv88e6390 temperature
sensor reading"), Linux reports the temperature of Topaz hwmon as
constant -75°C.
This is because switches from the Topaz family (88E6141 / 88E6341) have
the address of the temperature sensor register different from Peridot.
This address is instead compatible with 88E1510 PHYs, as was used for
Topaz before the above mentioned commit.
Create a new mapping table between switch family and PHY ID for families
which don't have a model number. And define PHY IDs for Topaz and Peridot
families.
Create a new PHY ID and a new PHY driver for Topaz's internal PHY.
The only difference from Peridot's PHY driver is the HWMON probing
method.
Prior this change Topaz's internal PHY is detected by kernel as:
PHY [...] driver [Marvell 88E6390] (irq=63)
And afterwards as:
PHY [...] driver [Marvell 88E6341 Family] (irq=63)
Signed-off-by: Pali Rohár <pali@kernel.org>
BugLink: https://github.com/globalscaletechnologies/linux/issues/1
Fixes: fee2d546414d ("net: phy: marvell: mv88e6390 temperature sensor reading")
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As currently set, the calls to nfs4_bitmask_adjust() will end up
overwriting the contents of the nfs_server cache_consistency_bitmask
field.
The intention here should be to modify a private copy of that mask in
the close/delegreturn/write arguments.
Fixes: 76bd5c016ef4 ("NFSv4: make cache consistency bitmask dynamic")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
This pr contains changes from mlx5-next branch,
already reviewed on netdev and rdma mailing lists, links below.
1) From Leon, Dynamically assign MSI-X vectors count
Already Acked by Bjorn Helgaas.
https://patchwork.kernel.org/project/netdevbpf/cover/20210314124256.70253-1-leon@kernel.org/
2) Cleanup series:
https://patchwork.kernel.org/project/netdevbpf/cover/20210311070915.321814-1-saeed@kernel.org/
From Mark, E-Switch cleanups and refactoring, and the addition
of single FDB mode needed HW bits.
From Mikhael, Remove unused struct field
From Saeed, Cleanup W=1 prototype warning
From Zheng, Esw related cleanup
From Tariq, User order-0 page allocation for EQs
====================
* mlx5-next:
net/mlx5: Implement sriov_get_vf_total_msix/count() callbacks
net/mlx5: Dynamically assign MSI-X vectors count
net/mlx5: Add dynamic MSI-X capabilities bits
PCI/IOV: Add sysfs MSI-X vector assignment interface
net/mlx5: Use order-0 allocations for EQs
net/mlx5: Add IFC bits needed for single FDB mode
net/mlx5: E-Switch, Refactor send to vport to be more generic
RDMA/mlx5: Use representor E-Switch when getting netdev and metadata
net/mlx5: E-Switch, Add eswitch pointer to each representor
net/mlx5: E-Switch, Add match on vhca id to default send rules
net/mlx5: Remove unused mlx5_core_health member recover_work
net/mlx5: simplify the return expression of mlx5_esw_offloads_pair()
net/mlx5: Cleanup prototype warning
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The driver core standard is to pass in the properly typed object, the
properly typed attribute and the buffer data. It stems from the root
kobject method:
ssize_t (*show)(struct kobject *kobj, struct kobj_attribute *attr,..)
Each subclass of kobject should provide their own function with the same
signature but more specific types, eg struct device uses:
ssize_t (*show)(struct device *dev, struct device_attribute *attr,..)
In this case the existing signature is:
ssize_t (*show)(struct kobject *kobj, struct device *dev,..)
Where kobj is a 'struct mdev_type *' and dev is 'mdev_type->parent->dev'.
Change the mdev_type related sysfs attribute functions to:
ssize_t (*show)(struct mdev_type *mtype, struct mdev_type_attribute *attr,..)
In order to restore type safety and match the driver core standard
There are no current users of 'attr', but if it is ever needed it would be
hard to add in retroactively, so do it now.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <18-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The kobj here is a type-erased version of mdev_type, which is already
stored in the struct mdev_device being passed in. It was only ever used to
compute the type_group_id, which is now extracted directly from the mdev.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <17-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Replace ugly #if (!IS_ENABLED) by if (!IS_ENABLED), remove
cross-module dependencies and use classic mechanism to pass
information to the machine driver.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210409220121.1542362-7-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We currently have an ugly way of handling the SOF nocodec mode, with
blatant violations between layers. To create the nocodec card, let's
add two new fields and the existing mach_params structure, that way
there will be no differences with regular cards.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210409220121.1542362-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Using sk_psock() to retrieve psock pointer from sock requires
RCU read lock, but we already get psock pointer before calling
->psock_update_sk_prot() in both cases, so we can just pass it
without bothering sk_psock().
Fixes: 8a59f9d1e3d4 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()")
Reported-by: syzbot+320a3bc8d80f478c37e4@syzkaller.appspotmail.com
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+320a3bc8d80f478c37e4@syzkaller.appspotmail.com
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210407032111.33398-1-xiyou.wangcong@gmail.com
|
|
bio_list_copy_data is only used by pktcdvd, so move it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210412134658.2623190-2-hch@lst.de
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
zero_fill_bio_iter is only used to implement zero_fill_bio, so
remove the indirection.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210412134658.2623190-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Per net/bpf/test_run.c, particular prog types have additional
restrictions around the parameters that can be provided, so document
these in the header.
I didn't bother documenting the limitation on duration for raw
tracepoints since that's an output parameter anyway.
Tested with ./tools/testing/selftests/bpf/test_doc_build.sh.
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210410174549.816482-1-joe@cilium.io
|
|
Remove vfs_ioc_setflags_prepare(), vfs_ioc_fssetxattr_check() and
simple_fill_fsxattr(), which are no longer used.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
There's a substantial amount of boilerplate in filesystems handling
FS_IOC_[GS]ETFLAGS/ FS_IOC_FS[GS]ETXATTR ioctls.
Also due to userspace buffers being involved in the ioctl API this is
difficult to stack, as shown by overlayfs issues related to these ioctls.
Introduce a new internal API named "fileattr" (fsxattr can be confused with
xattr, xflags is inappropriate, since this is more than just flags).
There's significant overlap between flags and xflags and this API handles
the conversions automatically, so filesystems may choose which one to use.
In ->fileattr_get() a hint is provided to the filesystem whether flags or
xattr are being requested by userspace, but in this series this hint is
ignored by all filesystems, since generating all the attributes is cheap.
If a filesystem doesn't implemement the fileattr API, just fall back to
f_op->ioctl(). When all filesystems are converted, the fallback can be
removed.
32bit compat ioctls are now handled by the generic code as well.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Sometimes we need to get the corresponding gendisk from request_queue.
It is preferred that block drivers store private data in
gendisk->private_data rather than request_queue->queuedata, e.g. see:
commit c4a59c4e5db3 ("dm: stop using ->queuedata").
So if only request_queue is given, we need to get its corresponding
gendisk to get the private data stored in that gendisk.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull OPP (Operating Performance Points) framework updates for v5.13
from Viresh Kumar:
"This adds devm variants for OPP APIs and updates few of the users
as well (Yangtao Li and Dmitry Osipenko)."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
memory: samsung: exynos5422-dmc: Convert to use resource-managed OPP API
drm/panfrost: Convert to use resource-managed OPP API
drm/lima: Convert to use resource-managed OPP API
mmc: sdhci-msm: Convert to use resource-managed OPP API
spi: spi-qcom-qspi: Convert to use resource-managed OPP API
spi: spi-geni-qcom: Convert to use resource-managed OPP API
serial: qcom_geni_serial: Convert to use resource-managed OPP API
opp: Change return type of devm_pm_opp_attach_genpd()
opp: Change return type of devm_pm_opp_register_set_opp_helper()
opp: Add devres wrapper for dev_pm_opp_of_add_table
opp: Add devres wrapper for dev_pm_opp_set_supported_hw
opp: Add devres wrapper for dev_pm_opp_set_regulators
opp: Add devres wrapper for dev_pm_opp_set_clkname
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq updates for v5.13 from Viresh Kumar:
"- Fix typos in s5pv210 cpufreq driver (Bhaskar Chowdhury).
- Armada 37xx: Fix cpufreq changing base CPU speed to 800 MHz from
1000 MHz (Pali Rohár and Marek Behún).
- cpufreq-dt: Return -EPROBE_DEFER on failure to add table (Quanyang
Wang).
- Minor cleanup in cppc driver (Tom Saeger).
- Add frequency invariance support for CPPC driver and generalize
freq invariance support arch-topology driver (Viresh Kumar)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: armada-37xx: Fix module unloading
cpufreq: armada-37xx: Remove cur_frequency variable
cpufreq: armada-37xx: Fix determining base CPU frequency
cpufreq: armada-37xx: Fix driver cleanup when registration failed
clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0
clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz
cpufreq: armada-37xx: Fix the AVS value for load L1
clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock
cpufreq: armada-37xx: Fix setting TBG parent for load levels
cpufreq: dt: dev_pm_opp_of_cpumask_add_table() may return -EPROBE_DEFER
cpufreq: cppc: simplify default delay_us setting
cpufreq: Rudimentary typos fix in the file s5pv210-cpufreq.c
cpufreq: CPPC: Add support for frequency invariance
arch_topology: Export arch_freq_scale and helpers
arch_topology: Allow multiple entities to provide sched_freq_tick() callback
arch_topology: Rename freq_scale as arch_freq_scale
|
|
The delta_rec_size and crc_val in the completion record should
be 32bits and not 16bits.
Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Reported-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161645618572.2003490.14466173451736323035.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now __io_uring_cancel() and __io_uring_files_cancel() are very similar
and mostly differ by how we count requests, merge them and allow
tctx_inflight() to handle counting.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1a5986a97df4dc1378f3fe0ca1eb483dbcf42112.1618101759.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The only exported helper we have right now is task_work_cancel(), which
cancels any task_work from a given task where func matches the queued
work item. This is a bit too coarse for some use cases. Add a
task_work_cancel_match() that allows to more specifically target
individual work items outside of purely the callback function used.
task_work_cancel() can be trivially implemented on top of that, hence do
so.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This adds two new POLL_ADD flags, IORING_POLL_UPDATE_EVENTS and
IORING_POLL_UPDATE_USER_DATA. As with the other POLL_ADD flag, these are
masked into sqe->len. If set, the POLL_ADD will have the following
behavior:
- sqe->addr must contain the the user_data of the poll request that
needs to be modified. This field is otherwise invalid for a POLL_ADD
command.
- If IORING_POLL_UPDATE_EVENTS is set, sqe->poll_events must contain the
new mask for the existing poll request. There are no checks for whether
these are identical or not, if a matching poll request is found, then it
is re-armed with the new mask.
- If IORING_POLL_UPDATE_USER_DATA is set, sqe->off must contain the new
user_data for the existing poll request.
A POLL_ADD with any of these flags set may complete with any of the
following results:
1) 0, which means that we successfully found the existing poll request
specified, and performed the re-arm procedure. Any error from that
re-arm will be exposed as a completion event for that original poll
request, not for the update request.
2) -ENOENT, if no existing poll request was found with the given
user_data.
3) -EALREADY, if the existing poll request was already in the process of
being removed/canceled/completing.
4) -EACCES, if an attempt was made to modify an internal poll request
(eg not one originally issued ass IORING_OP_POLL_ADD).
The usual -EINVAL cases apply as well, if any invalid fields are set
in the sqe for this command type.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The default io_uring poll mode is one-shot, where once the event triggers,
the poll command is completed and won't trigger any further events. If
we're doing repeated polling on the same file or socket, then it can be
more efficient to do multishot, where we keep triggering whenever the
event becomes true.
This deviates from the usual norm of having one CQE per SQE submitted. Add
a CQE flag, IORING_CQE_F_MORE, which tells the application to expect
further completion events from the submitted SQE. Right now the only user
of this is POLL_ADD in multishot mode.
Since sqe->poll_events is using the space that we normally use for adding
flags to commands, use sqe->len for the flag space for POLL_ADD. Multishot
mode is selected by setting IORING_POLL_ADD_MULTI in sqe->len. An
application should expect more CQEs for the specificed SQE if the CQE is
flagged with IORING_CQE_F_MORE. In multishot mode, only cancelation or an
error will terminate the poll request, in which case the flag will be
cleared.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We should be including the completion flags for better introspection on
exactly what completion event was logged.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The new netlink API for reading SFP data requires a new op to be
implemented. The idea of the new netlink SFP code is that userspace is
responsible to parsing the EEPROM data and requesting pages, rather
than have the kernel decide what pages are interesting and returning
them. This allows greater flexibility for newer formats.
Currently the generic SFP code only supports simple SFPs. Allow i2c
address 0x50 and 0x51 to be accessed with page and bank must always be
0. This interface will later be extended when for example QSFP support
is added.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow the driver to recognise DSFP transceiver module ID and therefore
allow its EEPROM dumps using ethtool.
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement ethtool_ops::get_module_eeprom_by_page() to enable
support of new SFP standards.
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prepare for ethtool_ops::get_module_eeprom_data() implementation by
extracting common part of mlx5_query_module_eeprom() into a separate
function.
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Define get_module_eeprom_by_page() ethtool callback and implement
netlink infrastructure.
get_module_eeprom_by_page() allows network drivers to dump a part of
module's EEPROM specified by page and bank numbers along with offset and
length. It is effectively a netlink replacement for get_module_info()
and get_module_eeprom() pair, which is needed due to emergence of
complex non-linear EEPROM layouts.
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into locking/core
Pull KCSAN changes from Paul E. McKenney: misc updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU changes from Paul E. McKenney:
- Bitmap support for "N" as alias for last bit
- kvfree_rcu updates
- mm_dump_obj() updates. (One of these is to mm, but was suggested by Andrew Morton.)
- RCU callback offloading update
- Polling RCU grace-period interfaces
- Realtime-related RCU updates
- Tasks-RCU updates
- Torture-test updates
- Torture-test scripting updates
- Miscellaneous fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
KASAN provides an asynchronous mode of execution.
Add reporting functionality for this mode.
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/20210315132019.33202-5-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next
Manivannan writes:
MHI changes for v5.13
core:
- Added support for Flash Programmer execution environment which allows the
host machine (like x86) to flash the modem firmware to NAND or eMMC in the
modem. The MHI bus will expose EDL channels (34, 35) and then the opensource
QDL tool [1] can be used to flash the firmware from the host.
- Added an internal helper for polling the MHI registers with a retry interval.
This helper is used now to poll for the MHI ready state in MHI STATUS
register.
- Various fixes for issues found during the bringup of SDX24/SDX55 based Quectel
and Telit modems.
- Updates to the Execution environment handling for proper downloading of the
AMSS image from SBL (Secondary Bootloader) mode.
- Added support for sending STOP channel command to the MHI device and also made
changes to the MHI core for proper handling of stop and restart.
- Fixed the runtime_pm handling in the core by forcing the device to be in wake
mode until TX completion and allowing it to suspend for RX.
- Added sanity checks for values read from the device to avoid crash if those
are corrupted somehow.
- Fixed warnings generated by sparse (W=2)
- Couple of kernel doc cleanups in mhi.h
pci_generic:
- Added support for runtime PM and generic PM
- Added Firehose channels for flashing the firmware
- Added support for modems such as Quectel EM1XXGR-L, SDX24, SDX65, Foxconn
T99W175 exposing relevant channels.
[1] https://git.linaro.org/landing-teams/working/qualcomm/qdl.git
* tag 'mhi-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi: (49 commits)
bus: mhi: fix typo in comments for struct mhi_channel_config
bus: mhi: core: Fix shadow declarations
bus: mhi: pci_generic: Constify mhi_controller_config struct definitions
bus: mhi: pci_generic: Introduce Foxconn T99W175 support
bus: mhi: core: Sanity check values from remote device before use
bus: mhi: pci_generic: Add FIREHOSE channels
bus: mhi: pci_generic: Implement PCI shutdown callback
bus: mhi: Improve documentation on channel transfer setup APIs
bus: mhi: core: Remove __ prefix for MHI channel unprepare function
bus: mhi: core: Check channel execution environment before issuing reset
bus: mhi: core: Clear configuration from channel context during reset
bus: mhi: core: Hold device wake for channel update commands
bus: mhi: core: Update debug messages to use client device
bus: mhi: core: Improvements to the channel handling state machine
bus: mhi: core: Clear context for stopped channels from remove()
bus: mhi: core: Allow sending the STOP channel command
bus: mhi: pci_generic: Add SDX65 based modem support
bus: mhi: core: Remove pre_init flag used for power purposes
bus: mhi: pm: reduce PM state change verbosity
bus: mhi: core: Fix MHI runtime_pm behavior
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-next
Oded writes:
This tag contains habanalabs driver changes for v5.13:
- Add support to reset device after the user closes the file descriptor.
Because we support a single user, we can reset the device (if needs to)
after a user closes its file descriptor to make sure the device is in
idle and clean state for the next user.
- Add a new feature to allow the user to wait on interrupt. This is needed
for future ASICs
- Replace GFP_ATOMIC with GFP_KERNEL wherever possible and add code to
support failure of allocating with GFP_ATOMIC.
- Update code to support the latest firmware image:
- More security features are done in the firmware
- Remove hard-coded assumptions and replace them with values that are
sent to the firmware on loading.
- Print device unusable error
- Reset device in case the communication between driver and firmware
gets out of sync.
- Support new PCI device ids for secured GAUDI.
- Expose current power draw through the INFO IOCTL.
- Support resetting the device upon a request from the BMC (through F/W).
- Always use only a single MSI in GAUDI, due to H/W limitation.
- Improve data-path code by taking out code from spinlock protection.
- Allow user to specify custom timeout per Command Submission.
- Some enhancements to debugfs.
- Various minor changes and improvements.
* tag 'misc-habanalabs-next-2021-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (41 commits)
habanalabs: print f/w boot unknown error
habanalabs: update to latest F/W communication header
habanalabs/gaudi: skip iATU if F/W security is enabled
habanalabs/gaudi: derive security status from pci id
habanalabs: move dram scrub to free sequence
habanalabs: send dynamic msi-x indexes to f/w
habanalabs/gaudi: clear QM errors only if not in stop_on_err mode
habanalabs: support DEVICE_UNUSABLE error indication from FW
habanalabs: use strscpy instead of sprintf and strlcpy
habanalabs: remove the store jobs array from CS IOCTL
habanalabs/gaudi: add debugfs to DMA from the device
habanalabs/gaudi: sync stream add protection to SOB reset flow
habanalabs: add custom timeout flag per cs
habanalabs: improve utilization calculation
habanalabs: support legacy and new pll indexes
habanalabs: move relevant datapath work outside cs lock
habanalabs: avoid soft lockup bug upon mapping error
habanalabs/gaudi: Update async events header
habanalabs/gaudi: unsecure TPC cfg status registers
habanalabs/gaudi: always use single-msi mode
...
|
|
More and more drivers rely on devres to manage their resources, however
if bus' probe() and release() methods are not trivial and control some
of resources as well (for example enable or disable clocks, or attach
device to a power domain), we need to make sure that driver-allocated
resources are released immediately after driver's remove() method
returns, and not postponed until driver core gets around to releasing
resources. To fix that we open a new devres group before calling
driver's probe() and explicitly release it when we return from driver's
remove().
Tested-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Some I2C drivers like Designware and HiSilicon will print the
bus frequency mode information, so add a public one that everyone
can make use of.
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Some I2C controller drivers will only unregister the I2C
adapter in their .remove() callback, which can be done
by simply using a managed variant to add the I2C adapter.
So add the managed functions for adding the I2C adapter.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
|
|
From now on only accepting complete software nodes.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Same problem that also existed in iptables/ip(6)tables, when
arptable_filter is removed there is no longer a wait period before the
table/ruleset is free'd.
Unregister the hook in pre_exit, then remove the table in the exit
function.
This used to work correctly because the old nf_hook_unregister API
did unconditional synchronize_net.
The per-net hook unregister function uses call_rcu instead.
Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Just like ip/ip6/arptables, the hooks have to be removed, then
synchronize_rcu() has to be called to make sure no more packets are being
processed before the ruleset data is released.
Place the hook unregistration in the pre_exit hook, then call the new
ebtables pre_exit function from there.
Years ago, when first netns support got added for netfilter+ebtables,
this used an older (now removed) netfilter hook unregister API, that did
a unconditional synchronize_rcu().
Now that all is done with call_rcu, ebtable_{filter,nat,broute} pernet exit
handlers may free the ebtable ruleset while packets are still in flight.
This can only happens on module removal, not during netns exit.
The new function expects the table name, not the table struct.
This is because upcoming patch set (targeting -next) will remove all
net->xt.{nat,filter,broute}_table instances, this makes it necessary
to avoid external references to those member variables.
The existing APIs will be converted, so follow the upcoming scheme of
passing name + hook type instead.
Fixes: aee12a0a3727e ("ebtables: remove nf_hook_register usage")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When async binder buffer got exhausted, some normal oneway transactions
will also be discarded and may cause system or application failures. By
that time, the binder debug information we dump may not be relevant to
the root cause. And this issue is difficult to debug if without the
backtrace of the thread sending spam.
This change will send BR_ONEWAY_SPAM_SUSPECT to userspace when oneway
spamming is detected, request to dump current backtrace. Oneway spamming
will be reported only once when exceeding the threshold (target process
dips below 80% of its oneway space, and current process is responsible for
either more than 50 transactions, or more than 50% of the oneway space).
And the detection will restart when the async buffer has returned to a
healthy state.
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Hang Lu <hangl@codeaurora.org>
Link: https://lore.kernel.org/r/1617961246-4502-3-git-send-email-hangl@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 30004ac9c090 ("tty: add tty_struct->dev pointer to corresponding
device instance") added a struct device pointer field to struct
tty_struct which was populated with the corresponding tty class device
during initialisation.
Unfortunately, not all ttys have a class device (e.g. pseudoterminals
and serdev) in which case the device pointer will be set to NULL,
something which have bit driver authors over the years.
In retrospect perhaps this field should never have been added, but let's
at least document the current behaviour.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210409073512.6876-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Callout devices are long-gone, but the ASYNC_SPLIT_TERMIOS flag was
never added to the deprecation mask.
Add it so that a warning is printed if it is ever used.
Fixes: 8a8ae62f8296 ("tty: warn on deprecated serial flags")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407095208.31838-7-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drivers should return -ENOTTY ("Inappropriate I/O control operation")
when an ioctl isn't supported, while -EINVAL is used for invalid
arguments.
Fix up the TIOCMGET, TIOCMSET and TIOCGICOUNT helpers which returned
-EINVAL when a tty driver did not implement the corresponding
operations.
Note that the TIOCMGET and TIOCMSET helpers predate git and do not get a
corresponding Fixes tag below.
Fixes: d281da7ff6f7 ("tty: Make tiocgicount a handler")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407095208.31838-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
