summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2021-04-21x86/hyperv: Move hv_do_rep_hypercall to asm-genericJoseph Salisbury1-0/+31
This patch makes no functional changes. It simply moves hv_do_rep_hypercall() out of arch/x86/include/asm/mshyperv.h and into asm-generic/mshyperv.h hv_do_rep_hypercall() is architecture independent, so it makes sense that it should be in the architecture independent mshyperv.h, not in the x86-specific mshyperv.h. This is done in preperation for a follow up patch which creates a consistent pattern for checking Hyper-V hypercall status. Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1618620183-9967-1-git-send-email-joseph.salisbury@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-04-21net: dsa: Allow default tag protocol to be overridden from DTTobias Waldekranz1-0/+5
Some combinations of tag protocols and Ethernet controllers are incompatible, and it is hard for the driver to keep track of these. Therefore, allow the device tree author (typically the board vendor) to inform the driver of this fact by selecting an alternate protocol that is known to work. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-21Merge tag 'mac80211-next-for-net-next-2021-04-20' of ↵David S. Miller4-24/+67
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Another set of updates, all over the map: * set sk_pacing_shift for 802.3->802.11 encap offload * some monitor support for 802.11->802.3 decap offload * HE (802.11ax) spec updates * userspace API for TDLS HE support * along with various other small features, cleanups and fixups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-21net: phy: marvell: add support for Amethyst internal PHYMarek Behún1-0/+1
Add support for Amethyst internal PHY. The only difference from Peridot is HWMON. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-21Merge tag 'mlx5-updates-2021-04-19' of ↵David S. Miller2-9/+41
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2021-04-19 This patchset provides some updates to mlx5e and mlx5 SW steering drivers: 1) Tariq and Vladyslav they both provide some trivial update to mlx5e netdev. The next 12 patches in the patchset are focused toward mlx5 SW steering: 2) 3 trivial cleanup patches 3) Dynamic Flex parser support: Flex parser is a HW parser that can support protocols that are not natively supported by the HCA, such as Geneve (TLV options) and GTP-U. There are 8 such parsers, and each of them can be assigned to parse a specific set of protocols. 4) Enable matching on Geneve TLV options 5) Use Flex parser for MPLS over UDP/GRE 6) Enable matching on tunnel GTP-U and GTP-U first extension header using 7) Improved QoS for SW steering internal QPair for a better insertion rate ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-21net: dsa: enable selftest support for all switches by defaultOleksij Rempel1-0/+2
Most of generic selftest should be able to work with probably all ethernet controllers. The DSA switches are not exception, so enable it by default at least for DSA. This patch was tested with SJA1105 and AR9331. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-21net: add generic selftest supportOleksij Rempel1-0/+12
Port some parts of the stmmac selftest and reuse it as basic generic selftest library. This patch was tested with following combinations: - iMX6DL FEC -> AT8035 - iMX6DL FEC -> SJA1105Q switch -> KSZ8081 - iMX6DL FEC -> SJA1105Q switch -> KSZ9031 - AR9331 ag71xx -> AR9331 PHY - AR9331 ag71xx -> AR9331 switch -> AR9331 PHY Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-21net: phy: genphy_loopback: add link speed configurationOleksij Rempel1-0/+1
In case of loopback, in most cases we need to disable autoneg support and force some speed configuration. Otherwise, depending on currently active auto negotiated link speed, the loopback may or may not work. This patch was tested with following PHYs: TJA1102, KSZ8081, KSZ9031, AT8035, AR9331. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-21capabilities: require CAP_SETFCAP to map uid 0Serge E. Hallyn2-1/+5
cap_setfcap is required to create file capabilities. Since commit 8db6c34f1dbc ("Introduce v3 namespaced file capabilities"), a process running as uid 0 but without cap_setfcap is able to work around this as follows: unshare a new user namespace which maps parent uid 0 into the child namespace. While this task will not have new capabilities against the parent namespace, there is a loophole due to the way namespaced file capabilities are represented as xattrs. File capabilities valid in userns 1 are distinguished from file capabilities valid in userns 2 by the kuid which underlies uid 0. Therefore the restricted root process can unshare a new self-mapping namespace, add a namespaced file capability onto a file, then use that file capability in the parent namespace. To prevent that, do not allow mapping parent uid 0 if the process which opened the uid_map file does not have CAP_SETFCAP, which is the capability for setting file capabilities. As a further wrinkle: a task can unshare its user namespace, then open its uid_map file itself, and map (only) its own uid. In this case we do not have the credential from before unshare, which was potentially more restricted. So, when creating a user namespace, we record whether the creator had CAP_SETFCAP. Then we can use that during map_write(). With this patch: 1. Unprivileged user can still unshare -Ur ubuntu@caps:~$ unshare -Ur root@caps:~# logout 2. Root user can still unshare -Ur ubuntu@caps:~$ sudo bash root@caps:/home/ubuntu# unshare -Ur root@caps:/home/ubuntu# logout 3. Root user without CAP_SETFCAP cannot unshare -Ur: root@caps:/home/ubuntu# /sbin/capsh --drop=cap_setfcap -- root@caps:/home/ubuntu# /sbin/setcap cap_setfcap=p /sbin/setcap unable to set CAP_SETFCAP effective capability: Operation not permitted root@caps:/home/ubuntu# unshare -Ur unshare: write failed /proc/self/uid_map: Operation not permitted Note: an alternative solution would be to allow uid 0 mappings by processes without CAP_SETFCAP, but to prevent such a namespace from writing any file capabilities. This approach can be seen at [1]. Background history: commit 95ebabde382 ("capabilities: Don't allow writing ambiguous v3 file capabilities") tried to fix the issue by preventing v3 fscaps to be written to disk when the root uid would map to the same uid in nested user namespaces. This led to regressions for various workloads. For example, see [2]. Ultimately this is a valid use-case we have to support meaning we had to revert this change in 3b0c2d3eaa83 ("Revert 95ebabde382c ("capabilities: Don't allow writing ambiguous v3 file capabilities")"). Link: https://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux.git/log/?h=2021-04-15/setfcap-nsfscaps-v4 [1] Link: https://github.com/containers/buildah/issues/3071 [2] Signed-off-by: Serge Hallyn <serge@hallyn.com> Reviewed-by: Andrew G. Morgan <morgan@kernel.org> Tested-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Tested-by: Giuseppe Scrivano <gscrivan@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-20RDMA/mlx5: Expose private query portMark Bloch2-0/+34
Expose a non standard query port via IOCTL that will be used to expose port attributes that are specific to mlx5 devices. The new interface receives a port number to query and returns a structure that contains the available attributes for that port. This will be used to fill the gap between pure DEVX use cases and use cases where a kernel needs to inform userspace about various kernel driver configurations that userspace must use in order to work correctly. Flags is used to indicate which fields are valid on return. MLX5_IB_UAPI_QUERY_PORT_VPORT: The vport number of the queered port. MLX5_IB_UAPI_QUERY_PORT_VPORT_VHCA_ID: The VHCA ID of the vport of the queered port. MLX5_IB_UAPI_QUERY_PORT_VPORT_STEERING_ICM_RX: The vport's RX ICM address used for sw steering. MLX5_IB_UAPI_QUERY_PORT_VPORT_STEERING_ICM_TX: The vport's TX ICM address used for sw steering. MLX5_IB_UAPI_QUERY_PORT_VPORT_REG_C0: The metadata used to tag egress packets of the vport. MLX5_IB_UAPI_QUERY_PORT_ESW_OWNER_VHCA_ID: The E-Switch owner vhca id of the vport. Link: https://lore.kernel.org/r/6e2ef13e5a266a6c037eb0105eb1564c7bb52f23.1618743394.git.leonro@nvidia.com Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-04-20btrfs: zoned: automatically reclaim zonesJohannes Thumshirn1-0/+12
When a file gets deleted on a zoned file system, the space freed is not returned back into the block group's free space, but is migrated to zone_unusable. As this zone_unusable space is behind the current write pointer it is not possible to use it for new allocations. In the current implementation a zone is reset once all of the block group's space is accounted as zone unusable. This behaviour can lead to premature ENOSPC errors on a busy file system. Instead of only reclaiming the zone once it is completely unusable, kick off a reclaim job once the amount of unusable bytes exceeds a user configurable threshold between 51% and 100%. It can be set per mounted filesystem via the sysfs tunable bg_reclaim_threshold which is set to 75% by default. Similar to reclaiming unused block groups, these dirty block groups are added to a to_reclaim list and then on a transaction commit, the reclaim process is triggered but after we deleted unused block groups, which will free space for the relocation process. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-20platform/chrome: cros_ec: Add Type C hard resetPrashant Malani1-0/+1
Update the EC command header to include the new event bit. This bit is included in the latest version of the Chrome EC headers[1]. [1] https://chromium.googlesource.com/chromiumos/platform/ec/+/refs/heads/main/include/ec_commands.h Signed-off-by: Prashant Malani <pmalani@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20210420171617.3830902-1-pmalani@chromium.org
2021-04-20spi: altera: separate core code from platform codeMatthew Gerlach1-0/+21
In preparation of adding support for a new bus type, separate the core spi-altera code from the platform driver code. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Link: https://lore.kernel.org/r/20210416165720.554144-2-matthew.gerlach@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-20ASoC: audio-graph: move audio_graph_remove() to simple-card-utils.cKuninori Morimoto2-3/+1
audio-graph-card2 can reuse audio_graph_remove() / asoc_simple_remove(). This patch moves it to simple-card-utils.c. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87y2df3uby.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-20ASoC: audio-graph: move audio_graph_card_probe() to simple-card-utils.cKuninori Morimoto2-2/+3
audio-graph-card2 can reuse audio_graph_card_probe(). This patch moves it to simple-card-utils.c. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87zgxv3uc4.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-20floppy: cleanups: remove trailing whitespacesDenis Efremov1-23/+23
Cleanup trailing whitespaces as checkpatch.pl suggests. Signed-off-by: Denis Efremov <efremov@linux.com> Link: https://lore.kernel.org/r/20210416083449.72700-2-efremov@linux.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-20PCI/MSI: Let PCI host bridges declare their reliance on MSI domainsMarc Zyngier1-0/+1
There is a whole class of host bridges that cannot know whether MSIs will be provided or not, as they rely on other blocks to provide the MSI functionnality, using MSI domains. This is the case for example on systems that use the ARM GIC architecture. Introduce a new attribute ('msi_domain') indicating that implicit dependency, and use this property to set the NO_MSI flag when no MSI domain is found at probe time. Link: https://lore.kernel.org/r/20210330151145.997953-11-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-20PCI/MSI: Kill default_teardown_msi_irqs()Marc Zyngier1-1/+0
It doesn't have any caller left. Link: https://lore.kernel.org/r/20210330151145.997953-10-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-20PCI/MSI: Kill msi_controller structureMarc Zyngier1-15/+1
msi_controller had a good, long life as the abstraction for a driver providing MSIs to PCI devices. But it has been replaced in all drivers by the more expressive generic MSI framework. Farewell, struct msi_controller. Link: https://lore.kernel.org/r/20210330151145.997953-9-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-20PCI/MSI: Drop use of msi_controller from core codeMarc Zyngier1-2/+0
As there is no driver using msi_controller, we can now safely remove its use from the PCI probe code. Link: https://lore.kernel.org/r/20210330151145.997953-8-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-20Merge branch 'fixes' into nextVinod Koul1-2/+2
2021-04-20KVM: x86: Add capability to grant VM access to privileged SGX attributeSean Christopherson1-0/+1
Add a capability, KVM_CAP_SGX_ATTRIBUTE, that can be used by userspace to grant a VM access to a priveleged attribute, with args[0] holding a file handle to a valid SGX attribute file. The SGX subsystem restricts access to a subset of enclave attributes to provide additional security for an uncompromised kernel, e.g. to prevent malware from using the PROVISIONKEY to ensure its nodes are running inside a geniune SGX enclave and/or to obtain a stable fingerprint. To prevent userspace from circumventing such restrictions by running an enclave in a VM, KVM restricts guest access to privileged attributes by default. Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Kai Huang <kai.huang@intel.com> Message-Id: <0b099d65e933e068e3ea934b0523bab070cb8cea.1618196135.git.kai.huang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-20KVM: Stop looking for coalesced MMIO zones if the bus is destroyedSean Christopherson1-2/+2
Abort the walk of coalesced MMIO zones if kvm_io_bus_unregister_dev() fails to allocate memory for the new instance of the bus. If it can't instantiate a new bus, unregister_dev() destroys all devices _except_ the target device. But, it doesn't tell the caller that it obliterated the bus and invoked the destructor for all devices that were on the bus. In the coalesced MMIO case, this can result in a deleted list entry dereference due to attempting to continue iterating on coalesced_zones after future entries (in the walk) have been deleted. Opportunistically add curly braces to the for-loop, which encompasses many lines but sneaks by without braces due to the guts being a single if statement. Fixes: f65886606c2d ("KVM: fix memory leak in kvm_io_bus_unregister_dev()") Cc: stable@vger.kernel.org Reported-by: Hao Sun <sunhao.th@gmail.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210412222050.876100-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-20Merge tag 'v5.12-rc8' into sched/core, to pick up fixesIngo Molnar94-240/+555
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-04-20net/mlx5: DR, Add support for isolate_vl_tc QPYevgeny Kliteynik1-1/+3
When using SW steering, rule insertion rate depends on the RDMA RC QP performance used for writing to the ICM. During stress this QP is competing on the HW resources with all the other QPs that are used to send data. To protect SW steering QP's performance in such cases, we set this QP to use isolated VL. The VL number is reserved by FW and is not exposed to the driver. Support for this QP on isolated VL exists only when both force-loopback and isolate_vl_tc capabilities are set. Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-20net/mlx5: DR, Add support for force-loopback QPYevgeny Kliteynik1-2/+5
When supported by the device, SW steering RoCE RC QP that is used to write/read to/from ICM will be created with force-loopback attribute. Such QP doesn't require GID index upon creation. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-20net/mlx5: mlx5_ifc updates for flex parserYevgeny Kliteynik1-4/+28
Added the required definitions for supporting more protocols by flex parsers (GTP-U, Geneve TLV options), and for using the right flex parser that was configured for this protocol. Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-20net/mlx5e: RX, Add checks for calculated Striding RQ attributesTariq Toukan1-2/+5
Striding RQ attributes below are mutually dependent. An unaware change to one might take the others out of the valid range derived by the HW caps: - The MPWQE size in bytes - The number of strides in a MPWQE - The stride size Add checks to verify they are valid and comply to the HW spec and SW assumptions/requirements. This is not a fix, no particular issue exists today. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-20net: phy: add genphy_c45_pma_suspend/resumeRadu Pirea (NXP OSS)1-0/+2
Add generic PMA suspend and resume callback functions for C45 PHYs. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller5-15/+36
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Add vlan match and pop actions to the flowtable offload, patches from wenxu. 2) Reduce size of the netns_ct structure, which itself is embedded in struct net Make netns_ct a read-mostly structure. Patches from Florian Westphal. 3) Add FLOW_OFFLOAD_XMIT_UNSPEC to skip dst check from garbage collector path, as required by the tc CT action. From Roi Dayan. 4) VLAN offload fixes for nftables: Allow for matching on both s-vlan and c-vlan selectors. Fix match of VLAN id due to incorrect byteorder. Add a new routine to properly populate flow dissector ethertypes. 5) Missing keys in ip{6}_route_me_harder() results in incorrect routes. This includes an update for selftest infra. Patches from Ido Schimmel. 6) Add counter hardware offload support through FLOW_CLS_STATS. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20netlink: simplify nl_set_extack_cookie_u64(), nl_set_extack_cookie_u32()Alexey Dobriyan1-8/+4
Taking address of a function argument directly works just fine. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20bpf: Add a bpf_snprintf helperFlorent Revest2-0/+29
The implementation takes inspiration from the existing bpf_trace_printk helper but there are a few differences: To allow for a large number of format-specifiers, parameters are provided in an array, like in bpf_seq_printf. Because the output string takes two arguments and the array of parameters also takes two arguments, the format string needs to fit in one argument. Thankfully, ARG_PTR_TO_CONST_STR is guaranteed to point to a zero-terminated read-only map so we don't need a format string length arg. Because the format-string is known at verification time, we also do a first pass of format string validation in the verifier logic. This makes debugging easier. Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210419155243.1632274-4-revest@chromium.org
2021-04-20bpf: Add a ARG_PTR_TO_CONST_STR argument typeFlorent Revest1-0/+1
This type provides the guarantee that an argument is going to be a const pointer to somewhere in a read-only map value. It also checks that this pointer is followed by a zero character before the end of the map value. Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210419155243.1632274-3-revest@chromium.org
2021-04-20bpf: Factorize bpf_trace_printk and bpf_seq_printfFlorent Revest1-0/+20
Two helpers (trace_printk and seq_printf) have very similar implementations of format string parsing and a third one is coming (snprintf). To avoid code duplication and make the code easier to maintain, this moves the operations associated with format string parsing (validation and argument sanitization) into one generic function. The implementation of the two existing helpers already drifted quite a bit so unifying them entailed a lot of changes: - bpf_trace_printk always expected fmt[fmt_size] to be the terminating NULL character, this is no longer true, the first 0 is terminating. - bpf_trace_printk now supports %% (which produces the percentage char). - bpf_trace_printk now skips width formating fields. - bpf_trace_printk now supports the X modifier (capital hexadecimal). - bpf_trace_printk now supports %pK, %px, %pB, %pi4, %pI4, %pi6 and %pI6 - argument casting on 32 bit has been simplified into one macro and using an enum instead of obscure int increments. - bpf_seq_printf now uses bpf_trace_copy_string instead of strncpy_from_kernel_nofault and handles the %pks %pus specifiers. - bpf_seq_printf now prints longs correctly on 32 bit architectures. - both were changed to use a global per-cpu tmp buffer instead of one stack buffer for trace_printk and 6 small buffers for seq_printf. - to avoid per-cpu buffer usage conflict, these helpers disable preemption while the per-cpu buffer is in use. - both helpers now support the %ps and %pS specifiers to print symbols. The implementation is also moved from bpf_trace.c to helpers.c because the upcoming bpf_snprintf helper will be made available to all BPF programs and will need it. Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210419155243.1632274-2-revest@chromium.org
2021-04-19perf: Extend PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHEKan Liang2-9/+25
Current Hardware events and Hardware cache events have special perf types, PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE. The two types don't pass the PMU type in the user interface. For a hybrid system, the perf subsystem doesn't know which PMU the events belong to. The first capable PMU will always be assigned to the events. The events never get a chance to run on the other capable PMUs. Extend the two types to become PMU aware types. The PMU type ID is stored at attr.config[63:32]. Add a new PMU capability, PERF_PMU_CAP_EXTENDED_HW_TYPE, to indicate a PMU which supports the extended PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE. The PMU type is only required when searching a specific PMU. The PMU specific codes will only be interested in the 'real' config value, which is stored in the low 32 bit of the event->attr.config. Update the event->attr.config in the generic code, so the PMU specific codes don't need to calculate it separately. If a user specifies a PMU type, but the PMU doesn't support the extended type, error out. If an event cannot be initialized in a PMU specified by a user, error out immediately. Perf should not try to open it on other PMUs. The new PMU capability is only set for the X86 hybrid PMUs for now. Other architectures, e.g., ARM, may need it as well. The support on ARM may be implemented later separately. Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/1618237865-33448-22-git-send-email-kan.liang@linux.intel.com
2021-04-19perf/x86: Add structures for the attributes of Hybrid PMUsKan Liang1-0/+12
Hybrid PMUs have different events and formats. In theory, Hybrid PMU specific attributes should be maintained in the dedicated struct x86_hybrid_pmu, but it wastes space because the events and formats are similar among Hybrid PMUs. To reduce duplication, all hybrid PMUs will share a group of attributes in the following patch. To distinguish an attribute from different Hybrid PMUs, a PMU aware attribute structure is introduced. A PMU type is required for the attribute structure. The type is internal usage. It is not visible in the sysfs API. Hybrid PMUs may support the same event name, but with different event encoding, e.g., the mem-loads event on an Atom PMU has different event encoding from a Core PMU. It brings issue if two attributes are created for them. Current sysfs_update_group finds an attribute by searching the attr name (aka event name). If two attributes have the same event name, the first attribute will be replaced. To address the issue, only one attribute is created for the event. The event_str is extended and stores event encodings from all Hybrid PMUs. Each event encoding is divided by ";". The order of the event encodings must follow the order of the hybrid PMU index. The event_str is internal usage as well. When a user wants to show the attribute of a Hybrid PMU, only the corresponding part of the string is displayed. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: https://lkml.kernel.org/r/1618237865-33448-18-git-send-email-kan.liang@linux.intel.com
2021-04-19dm: replace dm_vcalloc()Matthew Wilcox (Oracle)1-5/+0
Use kvcalloc or kvmalloc_array instead (depending whether zeroing is useful). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-04-19btrfs: add and use readahead_batch_lengthMatthew Wilcox (Oracle)1-0/+9
Implement readahead_batch_length() to determine the number of bytes in the current batch of readahead pages and use it in btrfs. Also use the readahead_pos to get the offset. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19fs: introduce a wrapper uuid_to_fsid()Amir Goldstein1-0/+8
Some filesystem's use a digest of their uuid for f_fsid. Create a simple wrapper for this open coded folding. Filesystems that have a non null uuid but use the block device number for f_fsid may also consider using this helper. [JK: Added missing asm/byteorder.h include] Link: https://lore.kernel.org/r/20210322173944.449469-2-amir73il@gmail.com Acked-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2021-04-19KVM: x86/mmu: Re-add const qualifier in kvm_tdp_mmu_zap_collapsible_sptesBen Gardon1-1/+1
kvm_tdp_mmu_zap_collapsible_sptes unnecessarily removes the const qualifier from its memlsot argument, leading to a compiler warning. Add the const annotation and pass it to subsequent functions. Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20210401233736.638171-2-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-19wireless: fix spelling of A-MSDU in HE capabilitiesJohannes Berg1-1/+1
In the HE capabilities, spell A-MSDU correctly, not "A-MDSU". Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210409123755.9e6ff1af1181.If6868bc6902ccd9a95c74c78f716c4b41473ef14@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-19wireless: align HE capabilities A-MPDU Length Exponent ExtensionJohannes Berg1-6/+4
The A-MPDU length exponent extension is defined differently in 802.11ax D6.1, align with that. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210409123755.c2a257d3e2df.I3455245d388c52c61dace7e7958dbed7e807cfb6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-19wireless: align some HE capabilities with the specJohannes Berg1-7/+7
Some names were changed, align that with the spec as of 802.11ax-D6.1. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210409123755.b1e5fbab0d8c.I3eb6076cb0714ec6aec6b8f9dee613ce4a05d825@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-19flow: remove spi key from flowi structFlorian Westphal1-3/+0
xfrm session decode ipv4 path (but not ipv6) sets this, but there are no consumers. Remove it. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2021-04-19nl80211: Add new RSNXE related nl80211 extended featuresIlan Peer1-0/+13
Draft P802.11ax_D2.5 defines the following capabilities that can be negotiated using RSNXE capabilities: - Secure LTF measurement exchange protocol. - Secure RTT measurement exchange protocol. - Management frame protection for all management frames exchanged during the negotiation and range measurement procedure. Extend the nl80211 API to allow drivers to declare support for these new capabilities as part of extended feature. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210409123755.8280e31d8091.Ifcb29f84f432290338f80c8378aa5c9e0a390c93@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-19mac80211: make ieee80211_vif_to_wdev work when the vif isn't in the driverEmmanuel Grumbach1-4/+1
This will allow the low level driver to get the wdev during the add_interface flow. In order to do that, remove a few checks from there and do not return NULL for vifs that were not yet added to the driver. Note that all the current callers of this helper function assume that the vif already exists: - The callers from the drivers already have a vif pointer. Before this change, ieee80211_vif_to_wdev would return NULL in some cases, but those callers don't even check they get a non-NULL pointer from ieee80211_vif_to_wdev. - The callers from net/mac80211/cfg.c assume the vif is already added to the driver as well. So, this change has no impact on existing callers of this helper function. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210409123755.6078d3517095.I1907a45f267a62dab052bcc44428aa7a2005ffc9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-19nl80211/cfg80211: add a flag to negotiate for LMR feedback in NDP rangingAvraham Stern2-1/+8
Add a flag that indicates that the ISTA shall indicate support for LMR feedback in NDP ranging negotiation. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210409123755.eff546283504.I2606161e700ac24d94d0b50c8edcdedd4c0395c2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-19ieee80211: add the values of ranging parameters max LTF total fieldAvraham Stern1-0/+7
Add an enum with the values of the ranging parameters max LTF total field, as defined in IEEE802.11az_D2.6, table Table 9-322h23fc. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210409123755.d2588ebb1974.I9424c8ade13c4c938cb9999d8ce99d0d4c1cc198@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-19cfg80211: constify ieee80211_get_response_rate returnJoe Perches1-1/+1
It's not modified so make it const with the eventual goal of moving data to text for various static struct ieee80211_rate arrays. Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/8b210b5f5972e39eded269b35a1297cf824c4181.camel@perches.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-19cfg80211: fix a few kernel-doc warningsRandy Dunlap1-2/+2
Fix multiple kernel-doc warnings in cfg80211.h. cfg80211.h:363: warning: missing initial short description on line: * struct ieee80211_sband_iftype_data cfg80211.h:6743: warning: missing initial short description on line: * cfg80211_vendor_cmd_get_sender Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20210417060142.1648-1-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-11 02:10:17 +0300