Age | Commit message (Collapse) | Author | Files | Lines |
|
Move the habanalabs.h uapi file from include/uapi/misc to
include/uapi/drm, and rename it to habanalabs_accel.h.
This is required before moving the actual driver to the accel
subsystem.
Update MAINTAINERS file accordingly.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Add a uAPI, as part of the INFO IOCTL, to allow users to send
requests directly to f/w, according to a pre-defined set of opcodes
that the f/w exposes.
The f/w will put the result in a kernel-allocated buffer, which the
driver will then copy to the user-supplied buffer.
This will allow f/w tools to communicate directly with the f/w
without the need to add a new uAPI to the driver for each new type
of request.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
A previous commit deprecated the option to export from handle, leaving
the code with no support for devices with virtual memory.
This commit modifies the export API in a way that unifies the uAPI to
user address for both cases (i.e. with and without MMU support) and add
the actual support for devices with virtual memory.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
As the COMMS protocol is being used more widely in our driver,
an available debug tool for the handshake will be handy.
This commit defines tracepoints to various key points of the COMMS
protocol.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.3:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
* EDID: Improved mode parsing and refactoring
* fbdev: Cleanups
* format-helper: Add conversion from XRGB8888 to XBGR8888 and ABGR8888
Driver Changes:
* accel/ivpu: Add driver for Intel VPU accelerator
* bridge: Support i.MX93 LDB plus DT bindings
* exynos: Fixes
* panel: vtdr6130: Fixes; Support AUO A030JTN01 plus DT bindings
* simpledrm: Support system-memory framebuffers plus DT bindings
* ssd130x: Fix sparse warning
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmPQN9YACgkQaA3BHVML
# eiNmmQf/bTV3oaMo55i3tYxhMCWYDtPVk+GGglDAykW7Lid8pvy6mJqJoW6uvgQF
# c6CcoY+6yG2WvnVLhXyhPaACiG5weQSdu3S/DdZ2nuJCb50YCwWNNKcu3qYnLVlz
# 2NQ/s0HN+Xvvy76GJFNarKlxSNADPWCNJ8wExAdBkWr7q8NiDfsWuMGrQRQORrm3
# zEkSJPKtWNHa+vmsQOO9yebD0LFx97CoU40FrVXZTtF0FugGIXjiknQwekzuFxdY
# fGBiFKsI+Y3s51gAppbmRRJ0jGLj3KDF5S+5GM8FNbgJQF67Wxttl/YtY6lJGcsa
# l0vpRoCe1ilhNVvoikzAu7UewkPKKA==
# =GLLt
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 25 Jan 2023 05:56:06 AEST
# gpg: using RSA key 7217FBAC8CE9CF6344A168E5680DC11D530B7A23
# gpg: Can't check signature: No public key
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y9A5ceDknyQixM3R@linux-uq9g
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.3-2023-01-20:
amdgpu:
- Secure display fixes
- Fix scaling
- Misc code cleanups
- Display BW alloc logic updates
- DCN 3.2 fixes
- Fix power reporting on certain firmwares for CZN/RN
- SR-IOV fixes
- Link training cleanup and code rework
- HDCP fixes
- Reserved VMID fix
- Documentation updates
- Colorspace fixes
- RAS updates
- GC11.0 fixes
- VCN instance harvesting fixes
- DCN 3.1.4/5 workarounds for S/G displays
- Add PCIe info to the INFO IOCTL
amdkfd:
- XNACK fix
UAPI:
- Add PCIe gen/lanes info to the amdgpu INFO IOCTL
Nesa ultimately plans to use this to make decisions about buffer placement optimizations
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20790
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120234523.7610-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for $kernel-version:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
* Cleanup unneeded include statements wrt <linux/fb.h>, <drm/drm_fb_helper.h>
and <drm/drm_crtc_helper.h>
* Remove unused helper DRM_DEBUG_KMS_RATELIMITED()
* fbdev: Remove obsolete aperture field from struct fb_device, plus
driver cleanups; Remove unused flag FBINFO_MISC_FIRMWARE
* MIPI-DSI: Fix brightness, plus rsp. driver updates
* scheduler: Deprecate drm_sched_resubmit_jobs()
* ttm: Fix MIPS build; Remove ttm_bo_wait(); Documentation fixes
Driver Changes:
* Remove obsolete drivers for userspace modesetting i810, mga, r128,
savage, sis, tdfx, via
* bridge: Support CDNS DSI J721E, plus DT bindings; lt9611: Various
fixes and improvements; sil902x: Various fixes; Fixes
* nouveau: Removed support for legacy ioctls; Replace zero-size array;
Cleanups
* panel: Fixes
* radeon: Use new DRM logging helpers
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8kDk5YX7Yz3eRhM@linux-uq9g
|
|
This optional callback was added in the commit 1f45f9dbb392 ("fb_defio:
add first_io callback") but it was never used by a driver. Let's remove
it since it's unlikely that will be used after a decade that was added.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230121192418.2814955-2-javierm@redhat.com
|
|
Add XB24 and AB24 to the list of supported formats. The format helpers
support conversion to these formats and they are documented in the
simple-framebuffer device tree bindings.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-8-thierry.reding@gmail.com
|
|
The original goal with drm_edid_connector_update() was to have a single
call for updating the connector and adding probed modes, in this order,
but that turned out to be problematic. Drivers that need to update the
connector in the .detect() callback would end up updating the probed
modes as well. Turns out the callback may be called so many times that
the probed mode list fills up without bounds, and this is amplified by
add_alternate_cea_modes() duplicating the CEA modes on every call,
actually running out of memory on some machines.
Kudos to Imre Deak <imre.deak@intel.com> for explaining this to me.
Go back to having separate drm_edid_connector_update() and
drm_edid_connector_add_modes() calls. The former may be called from
.detect(), .force(), or .get_modes(), but the latter only from
.get_modes().
Unlike drm_add_edid_modes(), have drm_edid_connector_add_modes() update
the probed modes from the EDID property instead of the passed in
EDID. This is mainly to enforce two things:
1) drm_edid_connector_update() must be called before
drm_edid_connector_add_modes().
Display info and quirks are needed for parsing the modes, and we
don't want to call update_display_info() again to ensure the info is
available, like drm_add_edid_modes() does.
2) The same EDID is used for both updating the connector and adding the
probed modes.
Fortunately, the change is easy, because no driver has actually adopted
drm_edid_connector_update(). Not even i915, and that's mainly because of
the problem described above.
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e86fff1579f14ebf6334692526c8f6831cd02cac.1674144945.git.jani.nikula@intel.com
|
|
For computing PCIe bandwidth in userspace and troubleshooting PCIe
bandwidth issues. Note that this intentionally fills holes and padding
in drm_amdgpu_info_device.
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20790
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Although the quirks are internal to EDID parsing, it'll be helpful to
store them in display info to avoid having to pass them around.
This will also help separate adding probed modes (which needs the
quirks) from updating display info.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/819b908f64ad2d158245917f436f24d33a65b95d.1672826282.git.jani.nikula@intel.com
|
|
Each of the user contexts has two command queues, one for compute engine
and one for the copy engine. Command queues are allocated and registered
in the device when the first job (command buffer) is submitted from
the user space to the VPU device. The userspace provides a list of
GEM buffer object handles to submit to the VPU, the driver resolves
buffer handles, pins physical memory if needed, increments ref count
for each buffer and stores pointers to buffer objects in
the ivpu_job objects that track jobs submitted to the device.
The VPU signals job completion with an asynchronous message that
contains the job id passed to firmware when the job was submitted.
Currently, the driver supports simple scheduling logic
where jobs submitted from user space are immediately pushed
to the VPU device command queues. In the future, it will be
extended to use hardware base scheduling and/or drm_sched.
Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-7-jacek.lawrynowicz@linux.intel.com
|
|
Read, parse and boot VPU firmware image.
Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-6-jacek.lawrynowicz@linux.intel.com
|
|
Adds four types of GEM-based BOs for the VPU:
- shmem
- internal
- prime
All types are implemented as struct ivpu_bo, based on
struct drm_gem_object. VPU address is allocated when buffer is created
except for imported prime buffers that allocate it in BO_INFO IOCTL due
to missing file_priv arg in gem_prime_import callback.
Internal buffers are pinned on creation, the rest of buffers types
can be pinned on demand (in SUBMIT IOCTL).
Buffer VPU address, allocated pages and mappings are released when the
buffer is destroyed.
Eviction mechanism is planned for future versions.
Add two new IOCTLs: BO_CREATE, BO_INFO
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-4-jacek.lawrynowicz@linux.intel.com
|
|
VPU Memory Management Unit is based on ARM MMU-600.
It allows the creation of multiple virtual address spaces for
the device and map noncontinuous host memory (there is no dedicated
memory on the VPU).
Address space is implemented as a struct ivpu_mmu_context, it has an ID,
drm_mm allocator for VPU addresses and struct ivpu_mmu_pgtable that
holds actual 3-level, 4KB page table.
Context with ID 0 (global context) is created upon driver initialization
and it's mainly used for mapping memory required to execute
the firmware.
Contexts with non-zero IDs are user contexts allocated each time
the devices is open()-ed and they map command buffers and other
workload-related memory.
Workloads executing in a given contexts have access only
to the memory mapped in this context.
This patch is has two main files:
- ivpu_mmu_context.c handles MMU page tables and memory mapping
- ivpu_mmu.c implements a driver that programs the MMU device
Co-developed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-3-jacek.lawrynowicz@linux.intel.com
|
|
VPU stands for Versatile Processing Unit and it's a CPU-integrated
inference accelerator for Computer Vision and Deep Learning
applications.
The VPU device consist of following components:
- Buttress - provides CPU to VPU integration, interrupt, frequency and
power management.
- Memory Management Unit (based on ARM MMU-600) - translates VPU to
host DMA addresses, isolates user workloads.
- RISC based microcontroller - executes firmware that provides job
execution API for the kernel-mode driver
- Neural Compute Subsystem (NCS) - does the actual work, provides
Compute and Copy engines.
- Network on Chip (NoC) - network fabric connecting all the components
This driver supports VPU IP v2.7 integrated into Intel Meteor Lake
client CPUs (14th generation).
Module sources are at drivers/accel/ivpu and module name is
"intel_vpu.ko".
This patch includes only very besic functionality:
- module, PCI device and IRQ initialization
- register definitions and low level register manipulation functions
- SET/GET_PARAM ioctls
- power up without firmware
Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-2-jacek.lawrynowicz@linux.intel.com
|
|
Backmerging into drm-misc-next to get DRM accelerator infrastructure,
which is required by ipuv driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Now that we have pre-parsed CTA VDB VICs stored in info->vics, leverage
that to simplify CTA Y420CMDB parsing. Move updating the y420_cmdb_modes
bitmap to the display info parsing stage, instead of updating it during
add modes. This allows us to drop the intermediate y420_cmdb_map from
display info, and replace it with a local variable.
This is prerequisite work for overall better separation of the two
parsing steps (updating display info and adding modes).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7a0e5e99a83f203b6a8981d263b89b2bb7d2fe15.1672826282.git.jani.nikula@intel.com
|
|
A number of places need access to the VICs. Just parse them early for
easy access. Gracefully handle multiple CTA VDBs. It's unlikely to have
more than one, but the CTA-861 references "Video Data Block(s)", so err
on the safe side.
Start parsing them now, convert users in follow-up to have fewer moving
parts in one go.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7989b2b37837be68953c5d20afd3e93762bfd626.1672826282.git.jani.nikula@intel.com
|
|
The MIPI DCS specification demands that brightness values are sent in
big endian byte order. It also states that one parameter (i.e. one byte)
shall be sent/received for 8 bit wide values, and two parameters shall
be used for values that are between 9 and 16 bits wide.
Add new functions to properly handle 16-bit brightness in big endian,
since the two 8- and 16-bit cases are distinct from each other.
[richard: use separate functions instead of switch/case]
[richard: split into 16-bit component]
Fixes: 1a9d759331b8 ("drm/dsi: Implement DCS set/get display brightness")
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Link: https://android.googlesource.com/kernel/msm/+/754affd62d0ee268c686c53169b1dbb7deac8550
[richard: fix 16-bit brightness_get]
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Tested-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116224909.23884-2-mailingradian@gmail.com
|
|
Not used anymore by other drivers or TTM itself.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125102137.1801-9-christian.koenig@amd.com
|
|
Remove some not implemented function define
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109095010.141189-4-christian.koenig@amd.com
|
|
There are no current users of DRM_DEBUG_KMS_RATELIMITED()
so remove it.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117180417.21066-2-nirmoy.das@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Remove most include statements from crm_crtc_helper.h and forward-
declare the contained types in drm_crtc_helper.h. Only keep <linux/types.h>
for the definition of 'bool'.
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116131235.18917-23-tzimmermann@suse.de
|
|
Several DRM core and helper source files include drm_crtc_helper.h
without needing it or only to get its transitive include statements;
leading to unnecessary compile-time dependencies.
Directly include required headers and drop drm_crtc_helper.h where
possible. The header file, drm_fixed.h, includes <linux/kernel.h>
for lower_32_bits().
v2:
* include drm_crtc_helper.h in drm_crtc_helper.c (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116131235.18917-3-tzimmermann@suse.de
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 feature pull #1 for v6.3:
Features and functionality:
- Meteorlake display enabling (Animesh, Luca, Stan, Jouni, Anusha)
- DP MST DSC support (Stan)
- Gamma/degamma readout support for the state checker (Ville)
- Enable SDP split support for DP 2.0 (Vinod)
- Add probe blocking support to i915.force_probe parameter (Rodrigo)
- Enable Xe HP 4tile support (Jonathan)
Refactoring and cleanups:
- Color refactoring, especially related to DSB usage (Ville)
- DSB refactoring (Ville)
- DVO refactoring (Ville)
- Backlight register and logging cleanups (Jani)
- Avoid display direct calls to uncore (Maarten, Jani)
- Add new "soc" sub-directory (Jani)
- Refactor DSC platform support checks (Swati)
Fixes:
- Interlace modes are no longer supported starting at display version 12 (Ankit)
- Use polling read for aux control (Arun)
- DMC firmware no longer requires specific versions (Gustavo)
- Fix PSR flickering and freeze issues (Jouni)
- Fix ICL+ DSI GPIO handling (Jani)
- Ratelimit errors in display engine irqs (Lucas)
- Fix DP MST DSC bpp and timeslot calculations (Stan)
- Fix CDCLK squash and crawl sequences (Ville, Anusha)
- Fix bigjoiner checks for fused pipes (Ville)
- Fix ADP+ degamma LUT size (Ville)
- Fix DVO ch7xxx and sil164 suspend/resume (Ville)
- Fix memory leak in VBT parsing (Xia Fukun)
- Fix VBT packet port selection for dual link DSI (Mikko Kovanen)
- Fix SDP infoframe product string for discrete graphics (Clint)
- Fix VLV/CHV HDMI/DP audio enable (Ville)
- Fix VRR delays and calculations (Ville)
- No longer disable transcoder for PHY test pattern change (Khaled)
- Fix dual PPS handling (Ville)
- Fix timeout and wait for DDI BUF CTL active after enabling (Ankit)
Merges:
- Backmerge drm-next to sync up with v6.2-rc1 (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87tu0wez34.fsf@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.3:
UAPI Changes:
* fourcc: Document Open Source user waiver
Cross-subsystem Changes:
* firmware: fix color-format selection for system framebuffers
Core Changes:
* format-helper: Add conversion from XRGB8888 to various sysfb formats;
Make XRGB8888 the only driver-emulated legacy format
* fb-helper: Avoid blank consoles from selecting an incorrect color format
* probe-helper: Enable/disable HPD on connectors plus driver updates
* Use drm_dbg_ helpers in several places
* docs: Document defaults for CRTC backgrounds; Document use of drm_minor
Driver Changes:
* arm/hdlcd: Use new debugfs helpers
* gud: Use new debugfs helpers
* panel: Support Visionox VTDR6130 AMOLED DSI; Support Himax HX8394; Convert
many drivers to common generic DSI write-sequence helper
* v3d: Do not opencode drm_gem_object_lookup()
* vc4: Various HVS an CRTC fixes
* vkms: Fix SEGFAULT from incorrect GEM-buffer mapping
* Convert various drivers to i2c probe_new()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8ADeSzZDj+tpibF@linux-uq9g
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.3-2023-01-06:
amdgpu:
- secure display support for multiple displays
- DML optimizations
- DCN 3.2 updates
- PSR updates
- DP 2.1 updates
- SR-IOV RAS updates
- VCN RAS support
- SMU 13.x updates
- Switch 1 element arrays to flexible arrays
- Add RAS support for DF 4.3
- Stack size improvements
- S0ix rework
- Soft reset fix
- Allow 0 as a vram limit on APUs
- Display fixes
- Misc code cleanups
- Documentation fixes
- Handle profiling modes for SMU13.x
amdkfd:
- Error handling fixes
- PASID fixes
radeon:
- Switch 1 element arrays to flexible arrays
drm:
- Add DP adaptive sync DPCD definitions
UAPI:
- Add new INFO queries for peak and min sclk/mclk for profile modes on newer chips
Proposed mesa patch: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/278
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230106222037.7870-1-alexander.deucher@amd.com
|
|
Define enum mode_set_atomic next to the only interface that uses
the type. This will allow for removing several include statements
for drm_fb_helper.h. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230111130206.29974-7-tzimmermann@suse.de
|
|
Including <linux/fb.h> in drm_crtc_helper.h is not required. Remove
the include statement and avoid rebuilding DRM whenever the fbdev
header changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230111130206.29974-4-tzimmermann@suse.de
|
|
There are no users left of struct fb_info.apertures and the flag
FBINFO_MISC_FIRMWARE. Remove both and the aperture-ownership code
in the fbdev core. All code for aperture ownership is now located
in the fbdev drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219160516.23436-19-tzimmermann@suse.de
|
|
Commit 399516ab0fee ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked these drivers obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
3dfx Glide-->driver/gpu/drm/tdfx
Matrox-->driver/gpu/drm/mga
Intel i810-->driver/gpu/drm/i810
S3 Savage-->drivers/gpu/drm/savage
ATI Rage 128->drivers/gpu/drm/r128
Silicon Integrated Systems->drivers/gpu/drm/sis
VIA Unichrome->drivers/gpu/drm/via
It's time to remove these drivers.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-10-cai.huoqing@linux.dev
|
|
Commit 399516ab0fee ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked via driver obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
VIA Unichrome->drivers/gpu/drm/via
It's time to remove this driver.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-8-cai.huoqing@linux.dev
|
|
Commit 399516ab0fee ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked sis driver obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
Silicon Integrated Systems->drivers/gpu/drm/sis
It's time to remove this driver.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-6-cai.huoqing@linux.dev
|
|
Commit 399516ab0fee ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked savage driver obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
S3 Savage-->drivers/gpu/drm/savage
It's time to remove this driver.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-5-cai.huoqing@linux.dev
|
|
Commit 399516ab0fee ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked r128 driver obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
ATI Rage 128->drivers/gpu/drm/r128
It's time to remove this driver.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-4-cai.huoqing@linux.dev
|
|
Commit 399516ab0fee ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked mga driver obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
Matrox-->driver/gpu/drm/mga
It's time to remove this driver.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-3-cai.huoqing@linux.dev
|
|
Commit 399516ab0fee ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked i810 driver obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
Intel i810-->driver/gpu/drm/i810
It's time to remove this driver.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-2-cai.huoqing@linux.dev
|
|
Remove nouveau's support for legacy contexts and buffers. It was
required by libdrm earlier than 2.4.33, released in March 2012. A
previous attempt in 2013 to remove the functionality [1] had to be
reverted [2] as there were still users left. Libdrm 2.4.33 is now
almost 11 years old and it is time for userspace to move on.
With the nouveau code gone, we can also remove the driver-feature
bit DRIVER_KMS_LEGACY_CONTEXT.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7c510133d93dd6f15ca040733ba7b2891ed61fd1 # 1
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c21eb21cb50d58e7cbdcb8b9e7ff68b85cfa5095 # 2
Link: https://patchwork.freedesktop.org/patch/msgid/20230112133858.17087-1-tzimmermann@suse.de
|
|
The documentation for struct drm_minor already states this, but that's
not always that easy to find.
Also due to historical reasons we still have the minor-centric
interfaces (like drm_debugfs_create_files), but since this is now
getting fixed we can put a few more pointers in place as to how this
should be done ideally. Note that debugfs isn't there yet for all
cases (debugfs files on kms objects like crtc/connector aren't
supported, neither debugfs files with full fops), so the debugfs side
of this is still rather aspirational and more for new users than
converting everything existing. todo.rst covers the additional work
needed already.
Motivated by some discussion with Rodrigo on irc about how drm/xe
should lay out its sysfs interfaces.
v2: Make the debugfs situation clearer in the commit message, but
don't elaborate more in the actual kerneldoc to avoid distracting from
the main message around sysfs (Jani)
Also fix some typos.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Wambui Karuga <wambui.karugax@gmail.com>
Cc: Maíra Canal <mcanal@igalia.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Melissa Wen <mwen@igalia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230109164604.3860862-1-daniel.vetter@ffwll.ch
|
|
The structs drm_debugfs_info and drm_debugfs_entry don't have
descriptions for their parameters, which is causing the following warnings:
include/drm/drm_debugfs.h:93: warning: Function parameter or member
'name' not described in 'drm_debugfs_info'
include/drm/drm_debugfs.h:93: warning: Function parameter or member
'show' not described in 'drm_debugfs_info'
include/drm/drm_debugfs.h:93: warning: Function parameter or member
'driver_features' not described in 'drm_debugfs_info'
include/drm/drm_debugfs.h:93: warning: Function parameter or member
'data' not described in 'drm_debugfs_info'
include/drm/drm_debugfs.h:105: warning: Function parameter or member
'dev' not described in 'drm_debugfs_entry'
include/drm/drm_debugfs.h:105: warning: Function parameter or member
'file' not described in 'drm_debugfs_entry'
include/drm/drm_debugfs.h:105: warning: Function parameter or member
'list' not described in 'drm_debugfs_entry'
Therefore, fix the warnings by adding descriptions to all struct
parameters.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230105193039.287677-2-mcanal@igalia.com
|
|
Many panel drivers define dsi_dcs_write_seq() and dsi_generic_write_seq()
macros to send DCS commands and generic write packets respectively, with
the payload specified as a list of parameters instead of using arrays.
There's already a macro for the former, introduced by commit 2a9e9daf75231
("drm/mipi-dsi: Introduce mipi_dsi_dcs_write_seq macro") so drivers can be
changed to use that. But there isn't one yet for the latter, let's add it.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102202542.3494677-2-javierm@redhat.com
|
|
Change made using a `clang-format -i include/drm/drm_mipi_dsi.h` command.
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102202542.3494677-1-javierm@redhat.com
|
|
Now as all drivers stopped calling drm_bridge_connector_enable_hpd() and
drm_bridge_connector_disable_hpd() it is safe to remove them complelely.
Rename our internal helpers to remove the underscore prefix.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102180705.459294-8-dmitry.baryshkov@linaro.org
|
|
Introduce two drm_connector_helper_funcs: enable_hpd() and disable_hpd().
They are called by drm_kms_helper_poll_enable() and
drm_kms_helper_poll_disable() (and thus drm_kms_helper_poll_init() and
drm_kms_helper_poll_fini()) respectively.
This allows DRM drivers to rely on drm_kms_helper_poll for enabling and
disabling HPD detection rather than doing that manually.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102180705.459294-3-dmitry.baryshkov@linaro.org
|
|
It's a bit a FAQ, and we really can't claim to be the authoritative
source for allocating these numbers used in many standard extensions
if we tell closed source or vendor stacks in general to go away.
Iirc this was already clarified in some vulkan discussions, but I
can't find that anywhere anymore. At least not in a public link.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Neil Trevett <ntrevett@nvidia.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: David Airlie <airlied@gmail.com>
Acked-by: Marek Olšák <maraeo@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123192437.1065826-1-daniel.vetter@ffwll.ch
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.3:
UAPI Changes:
* connector: Support analog-TV mode property
* media: Add MEDIA_BUS_FMT_RGB565_1X24_CPADHI,
MEDIA_BUS_FMT_RGB666_1X18 and MEDIA_BUS_FMT_RGB666_1X24_CPADHI
Cross-subsystem Changes:
* dma-buf: Documentation fixes
* i2c: Introduce i2c_client_get_device_id() helper
Core Changes:
* Improve support for analog TV output
* bridge: Remove unused drm_bridge_chain functions
* debugfs: Add per-device helpers and convert various DRM drivers
* dp-mst: Various fixes
* fbdev emulation: Always pick 32 bpp as default
* KUnit: Add tests for managed helpers; Various cleanups
* panel-orientation: Add quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50
* TTM: Open-code ttm_bo_wait() and remove the helper
Driver Changes:
* Fix preferred depth and bpp values throughout DRM drivers
* Remove #CONFIG_PM guards throughout DRM drivers
* ast: Various fixes
* bridge: Implement i2c's probe_new in various drivers; Fixes; ite-it6505:
Locking fixes, Cache EDID data; ite-it66121: Support IT6610 chip,
Cleanups; lontium-tl9611: Fix HDMI on DragonBoard 845c; parade-ps8640:
Use atomic bridge functions
* gud: Convert to DRM shadow-plane helpers; Perform flushing synchronously
during atomic update
* ili9486: Support 16-bit pixel data
* imx: Split off IPUv3 driver; Various fixes
* mipi-dbi: Convert to DRM shadow-plane helpers plus rsp driver changes;i
Support separate I/O-voltage supply
* mxsfb: Depend on ARCH_MXS or ARCH_MXC
* omapdrm: Various fixes
* panel: Use ktime_get_boottime() to measure power-down delay in various
drivers; Fix auto-suspend delay in various drivers; orisetech-ota5601a:
Add support
* sprd: Cleanups
* sun4i: Convert to new TV-mode property
* tidss: Various fixes
* v3d: Various fixes
* vc4: Convert to new TV-mode property; Support Kunit tests; Cleanups;
dpi: Support RGB565 and RGB666 formats; dsi: Convert DSI driver to
bridge
* virtio: Improve tracing
* vkms: Support small cursors in IGT tests; Various fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y7QIwlfElAYWxRcR@linux-uq9g
|
|
The DRM helper drm_fb_build_fourcc_list() creates a list of color
formats for primary planes of the generic drivers. Simplify the helper:
- It used to mix and filter native and emulated formats as provided
by the driver. Now the only emulated format is XRGB8888, which is
required as fallback by legacy software. Drop support for emulating
any other formats.
- Also convert alpha formats to their non-alpha counterparts. Generic
drivers don't support primary planes with alpha formats and some
DTs incorrectly advertise alpha channels for non-alpha hardware. So
only export non-alpha formats for primary planes.
With the simplified helper, scrap format lists of the affected generic
drivers. All they need is the firmware buffer's native format, from which
the helper creates the list of color formats.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-13-tzimmermann@suse.de
|
|
Add conversion from XRGB8888 to XRGB1555, ARGB1555 and RGBA5551, which
are the formats currently supported by the simplefb infrastructure. The
new helpers allow the output of XRGB8888 framebuffers to firmware
scanout buffers in one of the 15-bit formats.
v3:
* use __le* for destination buffers (Jose, kernel test robot)
v2:
* test 15-bit results with local endianness (Jose)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-10-tzimmermann@suse.de
|