| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This release we've seen a couple of updates to make some DT based APIs
use fwnode instead, allowing their use with ACPI systems, and a few
cleanups"
* tag 'regmap-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: fix duplicated word in <linux/regmap.h>
regmap: Switch to use fwnode instead of OF one
regmap-irq: use fwnode instead of device node in add_irq_chip()
regmap: remove stray space
regmap: convert all regmap_update_bits() and co. macros to static inlines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A fairly quiet release for SPI, nothing really going on in the core
although there's been quite a bit of driver related activity.
This includes the addition of some shared code in drivers/memory for
the Renesas RPC-IF which is used by a newly added SPI driver, the
memory subsystem doesn't seem to have a fixed maintainer at the minute
and this seemed like the most sensible way to get that hardware
supported.
- Quite a few cleanups and optimizations for the Altera, Qualcomm
GENI, sun6i and lantiq drivers.
- Several more GPIO descriptor conversions.
- Move the Cadence QuadSPI driver from drivers/mtd to drivers/spi.
- New support for Mediatek MT8192 and Renesas RPC-IF, R8A7742 and
R8A774e1"
* tag 'spi-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (119 commits)
dt-bindings: lpspi: New property in document DT bindings for LPSPI
spi: lpspi: fix using CS discontinuously on i.MX8DXLEVK
spi: lpspi: remove unused fsl_lpspi->chipselect
spi: lpspi: Fix kernel warning dump when probe fail after calling spi_register
spi: rockchip: Fix error in SPI slave pio read
spi: rockchip: Support 64-location deep FIFOs
spi: rockchip: Config spi rx dma burst size depend on xfer length
spi: spi-topcliff-pch: drop call to wakeup-disable
spi: spidev: Align buffers for DMA
spi: correct kernel-doc inconsistency
spi: sun4i: update max transfer size reported
spi: imx: enable runtime pm support
spi: update bindings for MT8192 SoC
spi: mediatek: add spi support for mt8192 IC
spi: Add bindings for Lightning Mountain SoC
spi: lantiq: Add support to Lightning Mountain SoC
spi: lantiq: Move interrupt configuration to SoC specific data structure
spi: lantiq: Add fifo size bit mask in SoC specific data structure
spi: lantiq: Add support to acknowledge interrupt
spi: lantiq: Move interrupt control register offesets to SoC specific data structure
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This time around the bulk of the work on the regulator API has been
cleanups of various kinds, partly but not entirely inspired by the W=1
stuff that 0day turned on.
There's also been a fairly large crop of new drivers, and a few
bugfixes for existing drivers.
- Mode setting support for MT6397 and DA9211.
- New drivers for ChromeOS embedded controllers, Fairchild FAN53880,
NXP PCA9450, Qualcomm LABIBB, MP5496, and VBUS booster, and Silergy
SY8827N"
* tag 'regulator-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (67 commits)
regulator: add the sub node names for the MP5496 PMIC
regulator: cros-ec-regulator: Fix double free of desc->name.
platform/chrome: cros_ec: Fix host command for regulator control.
regulator: pca9450: Convert to use module_i2c_driver
regulator: fix memory leak on error path of regulator_register()
regulator: Replace HTTP links with HTTPS ones
regulator: convert QCOM SMD-RPM regulator document to YAML schema
regulator: gpio: Honor regulator-boot-on property
regulator: core: Add destroy_regulator()
regulator: Correct kernel-doc inconsistency
regulator: Add labibb regulator binding
regulator: qcom: Add labibb driver
regulator: Allow regulators to verify enabled during enable()
regulator: cros-ec: Constify cros_ec_regulator_voltage_ops
regulator: devres: Standardise on function documentation headers
regulator: of_regulator: Add missing colon for rdev kerneldoc argument
regulator: devres: Fix issues with kerneldoc headers
regulator: fan53880: Add support for COMPILE_TEST
regulator: fan53880: Add missing .owner field in regulator_desc
dt-bindings: regulator: add pca9450 regulator yaml
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Tony Luck:
"Boris is on vacation and aske me to send you the EDAC changes"
* tag 'edac_updates_for_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC: Fix reference count leaks
EDAC: Remove edac_get_dimm_by_index()
EDAC/ghes: Scan the system once on driver init
EDAC/ghes: Remove unused members of struct ghes_edac_pvt, rename it to ghes_pvt
EDAC/ghes: Setup DIMM label from DMI and use it in error reports
EDAC, {skx,i10nm}: Use CPU stepping macro to pass configurations
EDAC/mc: Call edac_inc_ue_error() before panic
EDAC, pnd2: Set MCE_PRIO_EDAC priority for pnd2_mce_dec notifier
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new ARM SoC support from Arnd Bergmann:
"There are three SoC families newly dded to the 32-bit and 64-bit Arm
architecture code in the kernel this time:
- Daniel Palmer adds initial support for two chips made by MStar, a
taiwanese SoC manufacturer that became part of Mediatek in 2012.
For now, the added support is fairly minimal, with just two of its
Cortex-A7 based 32-bit camera chips getting support for a limited
set of on-chip peripherals.
- Lars Povlsen from Microchip adds support for their new Sparx5
family of ethernet switch chips using 64-bit Cortex-A53 cores.
These are descended from earlier VSC7xxx SparX and Ocelot chips
using 32-bit MIPS cores.
- Daniele Alessandrelli from Intel adds support for the new Keem Bay
SoC for computer vision, built around a Movidius VPU with Linux
running on Arm Cortex-A53 cores"
* tag 'arm-newsoc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
ARM: mstar: Correct the compatible string for pmsleep
dt-bindings: arm: mstar: remove the binding description for mstar,pmsleep
dt-bindings: mfd: syscon: add compatible string for mstar,msc313-pmsleep
ARM: mstar: Add reboot support
ARM: mstar: Add "pmsleep" node to base dtsi
ARM: mstar: Add PMU
ARM: mstar: Adjust IMI size for infinity3
ARM: mstar: Adjust IMI size for mercury5
ARM: mstar: Adjust IMI size of infinity
ARM: mstar: Add IMI SRAM region
dt-bindings: arm: mstar: Move existing MStar binding descriptions
dt-bindings: arm: mstar: Add binding details for mstar, pmsleep
ARM: mstar: Fix dts filename for 70mai midrive d08
ARM: mstar: Add dts for 70mai midrive d08
ARM: mstar: Add dts for msc313(e) based BreadBee boards
ARM: mstar: Add mercury5 series dtsis
ARM: mstar: Add infinity/infinity3 family dtsis
ARM: mstar: Add Armv7 base dtsi
ARM: mstar: Add binding details for mstar,l3bridge
ARM: mstar: Add machine for MStar/Sigmastar Armv7 SoCs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers
itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory subsystem
and its drivers, starting out with a set of cleanup patches.
A larger driver for the Tegra memory controller that was
accidentally missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware
blobs The tegra firmware driver gets extended to export some debug
information Various updates to i.MX firmware drivers, mostly
cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space. A new
firmware based trusted platform module (fTPM) driver is added based
on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for
identifying a machine through the SMCCC ARCH_SOC_ID firmware
interface rather than by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device
code.
There are also a number of updates to SoC specific drivers, the main
ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver"
* tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits)
soc: qcom: geni: Fix unused label warning
soc: qcom: smd-rpm: Fix kerneldoc
memory: jz4780_nemc: Only request IO memory the driver will use
soc: qcom: pdr: Reorder the PD state indication ack
MAINTAINERS: Add Git repository for memory controller drivers
memory: brcmstb_dpfe: Fix language typo
memory: samsung: exynos5422-dmc: Correct white space issues
memory: samsung: exynos-srom: Correct alignment
memory: pl172: Enclose macro argument usage in parenthesis
memory: of: Correct kerneldoc
memory: omap-gpmc: Fix language typo
memory: omap-gpmc: Correct white space issues
memory: omap-gpmc: Use 'unsigned int' for consistency
memory: omap-gpmc: Enclose macro argument usage in parenthesis
memory: omap-gpmc: Correct kerneldoc
memory: mvebu-devbus: Align with open parenthesis
memory: mvebu-devbus: Add missing braces to all arms of if statement
memory: bt1-l2-ctl: Add blank lines after declarations
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
...
|
|
Pull ARM SoC updates from Arnd Bergmann:
"These are mostly cosmetic changes and minor bugfixes for the SoC
specific code, across the 32-bit at91, mvebu, davinci, samsung, and
omap platforms.
The main notable changes are for the Samsung Exynos platform, which
sees a rewrite of gpio handling and a change to restore and adds a
workaround for a problem with cpuidle support"
* tag 'arm-soc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: socfpga: PM: add missing put_device() call in socfpga_setup_ocram_self_refresh()
MAINTAINERS: arm/amlogic: add designated reviewers
ARM: davinci: dm646x-evm: Simplify error handling in 'evm_sw_setup()'
ARM: davinci: Fix trivial spelling
ARM: davinci: Replace HTTP links with HTTPS ones
ARM: s3c24xx: Replace HTTP links with HTTPS ones
ARM: orion/gpio: Make use of for_each_requested_gpio()
ARM: at91: Replace HTTP links with HTTPS ones
ARM: at91: pm: add missing put_device() call in at91_pm_sram_init()
ARM: rpc: Change blacklist to quirklist in ecode.c file
ARM: OMAP: Replace HTTP links with HTTPS ones
ARM: s3c24xx: leds: Convert to use GPIO descriptors
udc: lpc32xx: mark local function static
ARM: exynos: MCPM: Restore big.LITTLE cpuidle support
ARM: exynos: clear L310_AUX_CTRL_FULL_LINE_ZERO in default l2c_aux_val
|
|
Pull ARM SoC DT updates from Arnd Bergmann:
"As usual, there are many patches addressing minor issues in existing
DTS files, such as DTC warnings, or adding support for additional
peripherals.
There are three added SoCs in existing product families:
- Amazon:
Alpine v3 is a 16-core Cortex-A72 SoC from Amazon's Annapurna Labs,
otherwise known as AL73400 or first-generation Graviton, and
following the already supported Cortex-A1`5 and Cortex-A57 based
Alpine chips. This one is added together with the official
Evaluation platform.
- Qualcomm:
The Snapdragon SDM630 platform is a family of mid-range mobile
phone chips from 2017 based on Cortex-A53 or Kryo 260 CPUs. A total
of five end-user products are added based on these, all Android
phones from Sony: Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra.
- Renesas:
RZ/G2H (r8a774e1) is currently the top model in the Renesas RZ/G
family, and apparently closely related to the RZ/G2N and RZ/G2M
models we already support but has a faster GPU and additional
on-chip peripherals. It is added along with the HopeRun HiHope
RZ/G2H development board
A small number of new boards for already supported SoCs also debut:
- Allwinner sunxi:
Only one new machine, revision v1.2 of the Pine64 PinePhone
(non-Android) smartphone, containing minor changes compared to
earlier versions.
- Amlogic Meson:
WeTek Core2 is an Amlogic S912 (GXM) based Set-top-box
- Aspeed:
EthanolX is AMD's EPYC data center rerence platform, using an
ASpeed AST2600 baseboard management controller.
- Mediatek:
Lenovo IdeaPad Duet 10.1" (kukui/krane) is a new Chromebook based
on the MT8183 (Helio P60t) SoC.
- Nvidia Tegra:
ASUS Google Nexus 7 and Acer Iconia Tab A500 are two Android
tablets from around 2012 using Tegra 3 and Tegra 2, respectively.
Thanks to PostmarketOS, these can now run mainline kernels and
become useful again.
The Jetson Xavier NX Developer Kit uses a SoM and carrier board for
the Tegra194, their latest 64-bit chip based on Carmel CPU cores
and Volta graphics.
- NXP i.MX:
Five new boards based on the 32-bit i.MX6 series are added: The
MYiR MYS-6ULX single-board computer, and four different models of
industrial computers from Protonic.
- Qualcomm:
MikroTik RouterBoard 3011 is a rackmounted router based on the
32-bit IPQ8064 networking SoC
Three older phones get added, the Snapdragon 808 (msm8992) based
Xiaomi Libra (Mi 4C) and Microsoft Lumia 950, originally running
Windows Phone, and the Snapdragon 810 (msm8994) based Sony Xperia
Z5.
- Renesas:
In addition to the HiHope RZ/G2H board mentioned above, we gain
support for board versions 3.0 and 4.0 of the earlier RZ/G2M and
RZ/G2N reference boards. Beacon EmbeddedWorks adds another
SoM+Carrier development board for RZ/G2M.
- Rockchips:
Radxa Rock Pi N8 development board and the VMARC RK3288 SoM it is
based on, using the high-end 32-bit rk3288 SoC.
Notable updates to existing platforms are usually for added on-chip
peripherals, including:
- ASpeed AST2xxx (various)
- Allwinner (cpufreq, thermal, Pinephone touchscreen)
- Amlogic Meson (audio, gpu dvdfs, board updates)
- Arm Versatile
- Broadcom (board updates for switch ports, Raspberry pi clock updates)
- Hisilicon (various)
- Intel/Altera SoCFPGA (various)
- Marvell Armada 7xxx/8xxx (smmu)
- Marvell MMP (GPU on mmp2/mmp3)
- Mediatek mt8183 (USB, pericfg)
- NXP Layerscape (VPU, thermal, DSPI)
- NXP i.MX (VPU, bindings, board updates)
- Nvidia Tegra194 (GPU)
- Qualcomm (GPU, Interconnect, ...)
- Renesas R-Car (SPI, IPMMU, board updates)
- STMicroelectronics STM32 (various)
- Samsung Exynos (various)
- Socionext Uniphier (updates to serial, and pcie)
- TI K3 (serdes, usb3, audio, sd, chipid)
- TI OMAP (IPU/DSP remoteproc changes, dropping platform data)"
* tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (605 commits)
arm64: dts: meson: odroid-n2: add jack audio output support
arm64: dts: meson: odroid-n2: enable audio loopback
ARM: dts: berlin: Align L2 cache-controller nodename with dtschema
arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree
arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree
arm64: dts: qcom: msm8992: Add RPMCC node
arm64: dts: qcom: msm8992: Add PSCI support.
arm64: dts: qcom: msm8992: Add PMU node
arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes
arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter device
arm64: dts: qcom: msm8992: Add a SCM node
arm64: dts: qcom: msm8992: Add a proper CPU map
arm64: dts: qcom: bullhead: Move UART pinctrl to SoC
arm64: dts: qcom: bullhead: Add qcom,msm-id
arm64: dts: qcom: msm8992: Fix SDHCI1
arm64: dts: qcom: msm8992: Modernize the DTS style
arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead.
arm64: dts: qcom: msm8994: Add support for SMD RPM
arm64: dts: qcom: msm8992: Add a label to rpm-requests
...
|
|
git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
- ASUS WMI driver honors BAT1 name of the battery (quite a few new
laptops are using it)
- Dell WMI driver supports new key codes and backlight events
- ThinkPad ACPI driver now may use standard charge threshold interface,
it also has been updated to provide Laptop or Desktop mode to the
user
- Intel Speed Select Technology gained support on Sapphire Rapids
platform
- Regular update of Speed Select Technology tools
- Mellanox has been updated to support complex attributes
- PMC core driver has been fixed to show correct names for LPM0
register
- HTTP links were replaced by HTTPS ones where it applies
- Miscellaneous fixes and cleanups here and there
* tag 'platform-drivers-x86-v5.9-1' of git://git.infradead.org/linux-platform-drivers-x86: (42 commits)
platform/x86: asus-nb-wmi: Drop duplicate DMI quirk structures
platform/x86: thinkpad_acpi: Make some symbols static
platform/x86: thinkpad_acpi: add documentation for battery charge control
platform/x86: thinkpad_acpi: use standard charge control attribute names
platform/x86: thinkpad_acpi: remove unused defines
platform/x86: ISST: drop a duplicated word in isst_if.h
tools/power/x86/intel-speed-select: Update version for v5.9
tools/power/x86/intel-speed-select: Add retries for mail box commands
tools/power/x86/intel-speed-select: Add option to delay mbox commands
tools/power/x86/intel-speed-select: Ignore -o option processing on error
tools/power/x86/intel-speed-select: Change path for caching topology info
platform/x86: acerhdf: Replace HTTP links with HTTPS ones
platform/x86: apple-gmux: Replace HTTP links with HTTPS ones
platform/x86: pcengines-apuv2: revert wiring up simswitch GPIO as LED
platform/x86: mlx-platform: Extend FAN platform data description
platform_data/mlxreg: Add presence register field for FAN devices
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform/mellanox: mlxreg-io: Add support for complex attributes
platform/x86: mlx-platform: Add more definitions for system attributes
platform_data/mlxreg: Add support for complex attributes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Misc cleanups all around the place"
* tag 'x86-cleanups-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioperm: Initialize pointer bitmap with NULL rather than 0
x86: uv: uv_hub.h: Delete duplicated word
x86: cmpxchg_32.h: Delete duplicated word
x86: bootparam.h: Delete duplicated word
x86/mm: Remove the unused mk_kernel_pgd() #define
x86/tsc: Remove unused "US_SCALE" and "NS_SCALE" leftover macros
x86/ioapic: Remove unused "IOAPIC_AUTO" define
x86/mm: Drop unused MAX_PHYSADDR_BITS
x86/msr: Move the F15h MSRs where they belong
x86/idt: Make idt_descr static
initrd: Remove erroneous comment
x86/mm/32: Fix -Wmissing prototypes warnings for init.c
cpu/speculation: Add prototype for cpu_show_srbds()
x86/mm: Fix -Wmissing-prototypes warnings for arch/x86/mm/init.c
x86/asm: Unify __ASSEMBLY__ blocks
x86/cpufeatures: Mark two free bits in word 3
x86/msr: Lift AMD family 0x15 power-specific MSRs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
"The main change in this cycle was to add support for ZSTD-compressed
kernel and initrd images.
ZSTD has a very fast decompressor, yet it compresses better than gzip"
* tag 'x86-boot-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: dontdiff: Add zstd compressed files
.gitignore: Add ZSTD-compressed files
x86: Add support for ZSTD compressed kernel
x86: Bump ZO_z_extra_bytes margin for zstd
usr: Add support for zstd compressed initramfs
init: Add support for zstd compressed kernel
lib: Add zstd support to decompress
lib: Prepare zstd for preboot environment, improve performance
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve uclamp performance by using a static key for the fast path
- Add the "sched_util_clamp_min_rt_default" sysctl, to optimize for
better power efficiency of RT tasks on battery powered devices.
(The default is to maximize performance & reduce RT latencies.)
- Improve utime and stime tracking accuracy, which had a fixed boundary
of error, which created larger and larger relative errors as the
values become larger. This is now replaced with more precise
arithmetics, using the new mul_u64_u64_div_u64() helper in math64.h.
- Improve the deadline scheduler, such as making it capacity aware
- Improve frequency-invariant scheduling
- Misc cleanups in energy/power aware scheduling
- Add sched_update_nr_running tracepoint to track changes to nr_running
- Documentation additions and updates
- Misc cleanups and smaller fixes
* tag 'sched-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
sched/doc: Factorize bits between sched-energy.rst & sched-capacity.rst
sched/doc: Document capacity aware scheduling
sched: Document arch_scale_*_capacity()
arm, arm64: Fix selection of CONFIG_SCHED_THERMAL_PRESSURE
Documentation/sysctl: Document uclamp sysctl knobs
sched/uclamp: Add a new sysctl to control RT default boost value
sched/uclamp: Fix a deadlock when enabling uclamp static key
sched: Remove duplicated tick_nohz_full_enabled() check
sched: Fix a typo in a comment
sched/uclamp: Remove unnecessary mutex_init()
arm, arm64: Select CONFIG_SCHED_THERMAL_PRESSURE
sched: Cleanup SCHED_THERMAL_PRESSURE kconfig entry
arch_topology, sched/core: Cleanup thermal pressure definition
trace/events/sched.h: fix duplicated word
linux/sched/mm.h: drop duplicated words in comments
smp: Fix a potential usage of stale nr_cpus
sched/fair: update_pick_idlest() Select group with lowest group_util when idle_cpus are equal
sched: nohz: stop passing around unused "ticks" parameter.
sched: Better document ttwu()
sched: Add a tracepoint to track rq->nr_running
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event updates from Ingo Molnar:
"HW support updates:
- Add uncore support for Intel Comet Lake
- Add RAPL support for Hygon Fam18h
- Add Intel "IIO stack to PMON mapping" support on Skylake-SP CPUs,
which enumerates per device performance counters via sysfs and
enables the perf stat --iiostat functionality
- Add support for Intel "Architectural LBRs", which generalized the
model specific LBR hardware tracing feature into a
model-independent, architected performance monitoring feature.
Usage is mostly seamless to tooling, as the pre-existing LBR
features are kept, but there's a couple of advantages under the
hood, such as faster context-switching, faster LBR reads, cleaner
exposure of LBR features to guest kernels, etc.
( Since architectural LBRs are supported via XSAVE, there's related
changes to the x86 FPU code as well. )
ftrace/perf updates:
- Add support to add a text poke event to record changes to kernel
text (i.e. self-modifying code) in order to support tracers like
Intel PT decoding through jump labels, kprobes and ftrace
trampolines.
Misc cleanups, smaller fixes..."
* tag 'perf-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
perf/x86/rapl: Add Hygon Fam18h RAPL support
kprobes: Remove unnecessary module_mutex locking from kprobe_optimizer()
x86/perf: Fix a typo
perf: <linux/perf_event.h>: drop a duplicated word
perf/x86/intel/lbr: Support XSAVES for arch LBR read
perf/x86/intel/lbr: Support XSAVES/XRSTORS for LBR context switch
x86/fpu/xstate: Add helpers for LBR dynamic supervisor feature
x86/fpu/xstate: Support dynamic supervisor feature for LBR
x86/fpu: Use proper mask to replace full instruction mask
perf/x86: Remove task_ctx_size
perf/x86/intel/lbr: Create kmem_cache for the LBR context data
perf/core: Use kmem_cache to allocate the PMU specific data
perf/core: Factor out functions to allocate/free the task_ctx_data
perf/x86/intel/lbr: Support Architectural LBR
perf/x86/intel/lbr: Factor out intel_pmu_store_lbr
perf/x86/intel/lbr: Factor out rdlbr_all() and wrlbr_all()
perf/x86/intel/lbr: Mark the {rd,wr}lbr_{to,from} wrappers __always_inline
perf/x86/intel/lbr: Unify the stored format of LBR information
perf/x86/intel/lbr: Support LBR_CTL
perf/x86: Expose CPUID enumeration bits for arch LBR
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- LKMM updates: mostly documentation changes, but also some new litmus
tests for atomic ops.
- KCSAN updates: the most important change is that GCC 11 now has all
fixes in place to support KCSAN, so GCC support can be enabled again.
Also more annotations.
- futex updates: minor cleanups and simplifications
- seqlock updates: merge preparatory changes/cleanups for the
'associated locks' facilities.
- lockdep updates:
- simplify IRQ trace event handling
- add various new debug checks
- simplify header dependencies, split out <linux/lockdep_types.h>,
decouple lockdep from other low level headers some more
- fix NMI handling
- misc cleanups and smaller fixes
* tag 'locking-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
kcsan: Improve IRQ state trace reporting
lockdep: Refactor IRQ trace events fields into struct
seqlock: lockdep assert non-preemptibility on seqcount_t write
lockdep: Add preemption enabled/disabled assertion APIs
seqlock: Implement raw_seqcount_begin() in terms of raw_read_seqcount()
seqlock: Add kernel-doc for seqcount_t and seqlock_t APIs
seqlock: Reorder seqcount_t and seqlock_t API definitions
seqlock: seqcount_t latch: End read sections with read_seqcount_retry()
seqlock: Properly format kernel-doc code samples
Documentation: locking: Describe seqlock design and usage
locking/qspinlock: Do not include atomic.h from qspinlock_types.h
locking/atomic: Move ATOMIC_INIT into linux/types.h
lockdep: Move list.h inclusion into lockdep.h
locking/lockdep: Fix TRACE_IRQFLAGS vs. NMIs
futex: Remove unused or redundant includes
futex: Consistently use fshared as boolean
futex: Remove needless goto's
futex: Remove put_futex_key()
rwsem: fix commas in initialisation
docs: locking: Replace HTTP links with HTTPS ones
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
- kfree_rcu updates
- RCU tasks updates
- Read-side scalability tests
- SRCU updates
- Torture-test updates
- Documentation updates
- Miscellaneous fixes
* tag 'core-rcu-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (109 commits)
torture: Remove obsolete "cd $KVM"
torture: Avoid duplicate specification of qemu command
torture: Dump ftrace at shutdown only if requested
torture: Add kvm-tranform.sh script for qemu-cmd files
torture: Add more tracing crib notes to kvm.sh
torture: Improve diagnostic for KCSAN-incapable compilers
torture: Correctly summarize build-only runs
torture: Pass --kmake-arg to all make invocations
rcutorture: Check for unwatched readers
torture: Abstract out console-log error detection
torture: Add a stop-run capability
torture: Create qemu-cmd in --buildonly runs
rcu/rcutorture: Replace 0 with false
torture: Add --allcpus argument to the kvm.sh script
torture: Remove whitespace from identify_qemu_vcpus output
rcutorture: NULL rcu_torture_current earlier in cleanup code
rcutorture: Handle non-statistic bang-string error messages
torture: Set configfile variable to current scenario
rcutorture: Add races with task-exit processing
locktorture: Use true and false to assign to bool variables
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull header cleanup from Ingo Molnar:
"Separate out the instrumentation_begin()/end() bits from compiler.h"
* tag 'core-headers-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
compiler.h: Move instrumentation_begin()/end() to new <linux/instrumentation.h> header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Fix a recent IRQ affinities regression, add in a missing debugfs
printout that helps the debugging of IRQ affinity logic bugs, and fix
a memory leak"
* tag 'irq-urgent-2020-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/debugfs: Add missing irqchip flags
genirq/affinity: Make affinity setting if activated opt-in
irqdomain/treewide: Free firmware node after domain removal
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 and cross-arch updates from Catalin Marinas:
"Here's a slightly wider-spread set of updates for 5.9.
Going outside the usual arch/arm64/ area is the removal of
read_barrier_depends() series from Will and the MSI/IOMMU ID
translation series from Lorenzo.
The notable arm64 updates include ARMv8.4 TLBI range operations and
translation level hint, time namespace support, and perf.
Summary:
- Removal of the tremendously unpopular read_barrier_depends()
barrier, which is a NOP on all architectures apart from Alpha, in
favour of allowing architectures to override READ_ONCE() and do
whatever dance they need to do to ensure address dependencies
provide LOAD -> LOAD/STORE ordering.
This work also offers a potential solution if compilers are shown
to convert LOAD -> LOAD address dependencies into control
dependencies (e.g. under LTO), as weakly ordered architectures will
effectively be able to upgrade READ_ONCE() to smp_load_acquire().
The latter case is not used yet, but will be discussed further at
LPC.
- Make the MSI/IOMMU input/output ID translation PCI agnostic,
augment the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID
bus-specific parameter and apply the resulting changes to the
device ID space provided by the Freescale FSL bus.
- arm64 support for TLBI range operations and translation table level
hints (part of the ARMv8.4 architecture version).
- Time namespace support for arm64.
- Export the virtual and physical address sizes in vmcoreinfo for
makedumpfile and crash utilities.
- CPU feature handling cleanups and checks for programmer errors
(overlapping bit-fields).
- ACPI updates for arm64: disallow AML accesses to EFI code regions
and kernel memory.
- perf updates for arm64.
- Miscellaneous fixes and cleanups, most notably PLT counting
optimisation for module loading, recordmcount fix to ignore
relocations other than R_AARCH64_CALL26, CMA areas reserved for
gigantic pages on 16K and 64K configurations.
- Trivial typos, duplicate words"
Link: http://lkml.kernel.org/r/20200710165203.31284-1-will@kernel.org
Link: http://lkml.kernel.org/r/20200619082013.13661-1-lorenzo.pieralisi@arm.com
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (82 commits)
arm64: use IRQ_STACK_SIZE instead of THREAD_SIZE for irq stack
arm64/mm: save memory access in check_and_switch_context() fast switch path
arm64: sigcontext.h: delete duplicated word
arm64: ptrace.h: delete duplicated word
arm64: pgtable-hwdef.h: delete duplicated words
bus: fsl-mc: Add ACPI support for fsl-mc
bus/fsl-mc: Refactor the MSI domain creation in the DPRC driver
of/irq: Make of_msi_map_rid() PCI bus agnostic
of/irq: make of_msi_map_get_device_domain() bus agnostic
dt-bindings: arm: fsl: Add msi-map device-tree binding for fsl-mc bus
of/device: Add input id to of_dma_configure()
of/iommu: Make of_map_rid() PCI agnostic
ACPI/IORT: Add an input ID to acpi_dma_configure()
ACPI/IORT: Remove useless PCI bus walk
ACPI/IORT: Make iort_msi_map_rid() PCI agnostic
ACPI/IORT: Make iort_get_device_domain IRQ domain agnostic
ACPI/IORT: Make iort_match_node_callback walk the ACPI namespace for NC
arm64: enable time namespace support
arm64/vdso: Restrict splitting VVAR VMA
arm64/vdso: Handle faults on timens page
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add support for function error injection.
- Add support for custom exception handlers, as required by
BPF_PROBE_MEM.
- Add support for BPF_PROBE_MEM.
- Add trace events for idle enter / exit for the s390 specific idle
implementation.
- Remove unused zcore memmmap device.
- Remove unused "raw view" from s390 debug feature.
- AP bus + zcrypt device driver code refactoring.
- Provide cex4 cca sysfs attributes for cex3 for zcrypt device driver.
- Expose only minimal interface to walk physmem for mm/memblock. This
is a common code change and it has been agreed on with Mike Rapoport
and Andrew Morton that this can go upstream via the s390 tree.
- Rework of the s390 vmem/vmmemap code to allow for future memory hot
remove.
- Get rid of FORCE_MAX_ZONEORDER to finally allow for order-10
allocations again, instead of only order-8 allocations.
- Various small improvements and fixes.
* tag 's390-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
s390/vmemmap: coding style updates
s390/vmemmap: avoid memset(PAGE_UNUSED) when adding consecutive sections
s390/vmemmap: remember unused sub-pmd ranges
s390/vmemmap: fallback to PTEs if mapping large PMD fails
s390/vmem: cleanup empty page tables
s390/vmemmap: take the vmem_mutex when populating/freeing
s390/vmemmap: cleanup when vmemmap_populate() fails
s390/vmemmap: extend modify_pagetable() to handle vmemmap
s390/vmem: consolidate vmem_add_range() and vmem_remove_range()
s390/vmem: rename vmem_add_mem() to vmem_add_range()
s390: enable HAVE_FUNCTION_ERROR_INJECTION
s390/pci: clarify comment in s390_mmio_read/write
s390/time: improve comparison for tod steering
s390/time: select CLOCKSOURCE_VALIDATE_LAST_CYCLE
s390/time: use CLOCKSOURCE_MASK
s390/bpf: implement BPF_PROBE_MEM
s390/kernel: expand exception table logic to allow new handling options
s390/kernel: unify EX_TABLE* implementations
s390/mm: allow order 10 allocations
s390/mm: avoid trimming to MAX_ORDER
...
|
|
Pull io_uring updates from Jens Axboe:
"Lots of cleanups in here, hardening the code and/or making it easier
to read and fixing bugs, but a core feature/change too adding support
for real async buffered reads. With the latter in place, we just need
buffered write async support and we're done relying on kthreads for
the fast path. In detail:
- Cleanup how memory accounting is done on ring setup/free (Bijan)
- sq array offset calculation fixup (Dmitry)
- Consistently handle blocking off O_DIRECT submission path (me)
- Support proper async buffered reads, instead of relying on kthread
offload for that. This uses the page waitqueue to drive retries
from task_work, like we handle poll based retry. (me)
- IO completion optimizations (me)
- Fix race with accounting and ring fd install (me)
- Support EPOLLEXCLUSIVE (Jiufei)
- Get rid of the io_kiocb unionizing, made possible by shrinking
other bits (Pavel)
- Completion side cleanups (Pavel)
- Cleanup REQ_F_ flags handling, and kill off many of them (Pavel)
- Request environment grabbing cleanups (Pavel)
- File and socket read/write cleanups (Pavel)
- Improve kiocb_set_rw_flags() (Pavel)
- Tons of fixes and cleanups (Pavel)
- IORING_SQ_NEED_WAKEUP clear fix (Xiaoguang)"
* tag 'for-5.9/io_uring-20200802' of git://git.kernel.dk/linux-block: (127 commits)
io_uring: flip if handling after io_setup_async_rw
fs: optimise kiocb_set_rw_flags()
io_uring: don't touch 'ctx' after installing file descriptor
io_uring: get rid of atomic FAA for cq_timeouts
io_uring: consolidate *_check_overflow accounting
io_uring: fix stalled deferred requests
io_uring: fix racy overflow count reporting
io_uring: deduplicate __io_complete_rw()
io_uring: de-unionise io_kiocb
io-wq: update hash bits
io_uring: fix missing io_queue_linked_timeout()
io_uring: mark ->work uninitialised after cleanup
io_uring: deduplicate io_grab_files() calls
io_uring: don't do opcode prep twice
io_uring: clear IORING_SQ_NEED_WAKEUP after executing task works
io_uring: batch put_task_struct()
tasks: add put_task_struct_many()
io_uring: return locked and pinned page accounting
io_uring: don't miscount pinned memory
io_uring: don't open-code recv kbuf managment
...
|
|
Pull core block updates from Jens Axboe:
"Good amount of cleanups and tech debt removals in here, and as a
result, the diffstat shows a nice net reduction in code.
- Softirq completion cleanups (Christoph)
- Stop using ->queuedata (Christoph)
- Cleanup bd claiming (Christoph)
- Use check_events, moving away from the legacy media change
(Christoph)
- Use inode i_blkbits consistently (Christoph)
- Remove old unused writeback congestion bits (Christoph)
- Cleanup/unify submission path (Christoph)
- Use bio_uninit consistently, instead of bio_disassociate_blkg
(Christoph)
- sbitmap cleared bits handling (John)
- Request merging blktrace event addition (Jan)
- sysfs add/remove race fixes (Luis)
- blk-mq tag fixes/optimizations (Ming)
- Duplicate words in comments (Randy)
- Flush deferral cleanup (Yufen)
- IO context locking/retry fixes (John)
- struct_size() usage (Gustavo)
- blk-iocost fixes (Chengming)
- blk-cgroup IO stats fixes (Boris)
- Various little fixes"
* tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits)
block: blk-timeout: delete duplicated word
block: blk-mq-sched: delete duplicated word
block: blk-mq: delete duplicated word
block: genhd: delete duplicated words
block: elevator: delete duplicated word and fix typos
block: bio: delete duplicated words
block: bfq-iosched: fix duplicated word
iocost_monitor: start from the oldest usage index
iocost: Fix check condition of iocg abs_vdebt
block: Remove callback typedefs for blk_mq_ops
block: Use non _rcu version of list functions for tag_set_list
blk-cgroup: show global disk stats in root cgroup io.stat
blk-cgroup: make iostat functions visible to stat printing
block: improve discard bio alignment in __blkdev_issue_discard()
block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers
block: defer flush request no matter whether we have elevator
block: make blk_timeout_init() static
block: remove retry loop in ioc_release_fn()
block: remove unnecessary ioc nested locking
block: integrate bd_start_claiming into __blkdev_get
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add support for allocating transforms on a specific NUMA Node
- Introduce the flag CRYPTO_ALG_ALLOCATES_MEMORY for storage users
Algorithms:
- Drop PMULL based ghash on arm64
- Fixes for building with clang on x86
- Add sha256 helper that does the digest in one go
- Add SP800-56A rev 3 validation checks to dh
Drivers:
- Permit users to specify NUMA node in hisilicon/zip
- Add support for i.MX6 in imx-rngc
- Add sa2ul crypto driver
- Add BA431 hwrng driver
- Add Ingenic JZ4780 and X1000 hwrng driver
- Spread IRQ affinity in inside-secure and marvell/cesa"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (157 commits)
crypto: sa2ul - Fix inconsistent IS_ERR and PTR_ERR
hwrng: core - remove redundant initialization of variable ret
crypto: x86/curve25519 - Remove unused carry variables
crypto: ingenic - Add hardware RNG for Ingenic JZ4780 and X1000
dt-bindings: RNG: Add Ingenic RNG bindings.
crypto: caam/qi2 - add module alias
crypto: caam - add more RNG hw error codes
crypto: caam/jr - remove incorrect reference to caam_jr_register()
crypto: caam - silence .setkey in case of bad key length
crypto: caam/qi2 - create ahash shared descriptors only once
crypto: caam/qi2 - fix error reporting for caam_hash_alloc
crypto: caam - remove deadcode on 32-bit platforms
crypto: ccp - use generic power management
crypto: xts - Replace memcpy() invocation with simple assignment
crypto: marvell/cesa - irq balance
crypto: inside-secure - irq balance
crypto: ecc - SP800-56A rev 3 local public key validation
crypto: dh - SP800-56A rev 3 local public key validation
crypto: dh - check validity of Z before export
lib/mpi: Add mpi_sub_ui()
...
|
|
git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fsverity update from Eric Biggers:
"One fix for fs/verity/ to strengthen a memory barrier which might be
too weak. This mirrors a similar fix in fs/crypto/"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fs-verity: use smp_load_acquire() for ->i_verity_info
|
|
Pull fscrypt updates from Eric Biggers:
"This release, we add support for inline encryption via the blk-crypto
framework which was added in 5.8.
Now when an ext4 or f2fs filesystem is mounted with '-o inlinecrypt',
the contents of encrypted files will be encrypted/decrypted via
blk-crypto, instead of directly using the crypto API. This model
allows taking advantage of the inline encryption hardware that is
integrated into the UFS or eMMC host controllers on most mobile SoCs.
Note that this is just an alternate implementation; the ciphertext
written to disk stays the same.
(This pull request does *not* include support for direct I/O on
encrypted files, which blk-crypto makes possible, since that part is
still being discussed.)
Besides the above feature update, there are also a few fixes and
cleanups, e.g. strengthening some memory barriers that may be too
weak.
All these patches have been in linux-next with no reported issues.
I've also tested them with the fscrypt xfstests, as usual. It's also
been tested that the inline encryption support works with the support
for Qualcomm and Mediatek inline encryption hardware that will be in
the scsi pull request for 5.9. Also, several SoC vendors are already
using a previous, functionally equivalent version of these patches"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: don't load ->i_crypt_info before it's known to be valid
fscrypt: document inline encryption support
fscrypt: use smp_load_acquire() for ->i_crypt_info
fscrypt: use smp_load_acquire() for ->s_master_keys
fscrypt: use smp_load_acquire() for fscrypt_prepared_key
fscrypt: switch fscrypt_do_sha256() to use the SHA-256 library
fscrypt: restrict IV_INO_LBLK_* to AES-256-XTS
fscrypt: rename FS_KEY_DERIVATION_NONCE_SIZE
fscrypt: add comments that describe the HKDF info strings
ext4: add inline encryption support
f2fs: add inline encryption support
fscrypt: add inline encryption support
fs: introduce SB_INLINECRYPT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"We don't have any big feature updates this time, there are lots of
small enhacements or fixes. A highlight perhaps is the parallel fsync
performance improvements, numbers below.
Regarding the dio/iomap that was reverted last time, the required API
changes are likely to land in the upcoming cycle, the btrfs part will
be updated afterwards.
User visible changes:
- new mount option rescue= to group all recovery-related mount
options so we don't have many specific options, currently
introducing only aliases for existing options, future extensions
are in development to allow read-only mount with partially damaged
structures:
- usebackuproot is an alias for rescue=usebackuproot
- nologreplay is an alias for rescue=nologreplay
- start deprecation of mount option inode_cache, removal scheduled to
v5.11
- removed deprecated mount options alloc_start and subvolrootid
- device stats corruption counter gets incremented when a checksum
mismatch is found
- qgroup information exported in /sys/fs/btrfs/<UUID>/qgroups/<id>
using sysfs
- add link /sys/fs/btrfs/<UUID>/bdi pointing to the associated
backing dev info
- FS_INFO ioctl enhancements:
- add flags to request/describe newly added items
- new item: numeric checksum type and checksum size
- new item: generation
- new item: metadata_uuid
- seed device: with one new read-write device added, print the new
device information in /proc/mounts
- balance: detect cancellation by Ctrl-C in existing cancellation
points
Performance improvements:
- optimized versions of various helpers on little-endian
architectures, where we don't have to do LE/BE conversion from
on-disk format
- tree-log/fsync optimizations leading to lower max latency reported
by dbench, reduced by about 12%
- all chunk tree leaves are prefetched at mount time, can improve
mount time on large (terabyte-sized) filesystems
- speed up parallel fsync of files with reflinked/deduped extents,
with jobs 16 to 1024 the throughput gets improved roughly by 50% on
average and runtime decreased roughly by 30% on average, notable
outlier is 128 jobs with +121.2% on throughput and -54.6% runtime
- another speed up of parallel fsync, reduce number of checksum tree
lookups and contention, the improvements start to show up with 2
tasks with +20% throughput and -16% runtime up to 64 with +200%
throughput and -66% runtime
Core:
- umount-time qgroup leak checker
- qgroups
- add a way to unreserve partial range after failure, avoiding
some EDQUOT errors
- improved flushing logic when EDQUOT is hit
- possible EINTR interruption caused by failed reservations after
transaction start is better handled and documented
- transaction abort errors are unified to EROFS in case it's not the
original reason of abort or we don't have other way to determine
the reason
Fixes:
- make truncate succeed on a NOCOW file even if data space is
exhausted
- fix cancelling balance on filesystem with exhausted metadata space
- anon block device:
- preallocate anon bdev when subvolume is created to report
failure early
- shorten time the anon bdev id is allocated
- don't allocate anon bdev for internal roots
- minor memory leak in ref-verify
- refuse invalid combinations of compression and NOCOW file flags
- lockdep fixes, updating the device locks
- remove obsolete fallback logic for block group profile adjustments
when switching from 1 to more devices, causing allocation of
unwanted block groups
Other cleanups, refactoring, simplifications:
- conversions from struct inode to struct btrfs_inode in internal
functions
- removal of unused struct members"
* tag 'for-5.9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (151 commits)
btrfs: do not set the full sync flag on the inode during page release
btrfs: release old extent maps during page release
btrfs: fix race between page release and a fast fsync
btrfs: open-code remount flag setting in btrfs_remount
btrfs: if we're restriping, use the target restripe profile
btrfs: don't adjust bg flags and use default allocation profiles
btrfs: fix lockdep splat from btrfs_dump_space_info
btrfs: move the chunk_mutex in btrfs_read_chunk_tree
btrfs: open device without device_list_mutex
btrfs: sysfs: use NOFS for device creation
btrfs: return EROFS for BTRFS_FS_STATE_ERROR cases
btrfs: document special case error codes for fs errors
btrfs: don't WARN if we abort a transaction with EROFS
btrfs: reduce contention on log trees when logging checksums
btrfs: remove done label in writepage_delalloc
btrfs: add comments for btrfs_reserve_flush_enum
btrfs: relocation: review the call sites which can be interrupted by signal
btrfs: avoid possible signal interruption of btrfs_drop_snapshot() on relocation tree
btrfs: relocation: allow signal to cancel balance
btrfs: raid56: remove out label in __raid56_parity_recover
...
|
|
Pull tpm updates from Jarkko Sakkinen:
"An issue was fixed with the TPM space buffer size. The buffer is used
to store in-TPM objects while swapped out of the TPM for a /dev/tpmrm0
session. The code incorrectly used PAGE_SIZE, which obviously can
vary. With these changes the buffer has a fixed size of 16 kB.
In addition, this contains support for acquiring TPM even log from
TPM2 ACPI table. This method is used by QEMU in particular"
* tag 'tpmdd-next-v5.9' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm: Add support for event log pointer found in TPM2 ACPI table
acpi: Extend TPM2 ACPI table with missing log fields
tpm: Unify the mismatching TPM space buffer sizes
tpm: Require that all digests are present in TCG_PCR_EVENT2 structures
|
|
That gives us ordering guarantees around the pair.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull networking fixes from David Miller:
1) Encap offset calculation is incorrect in esp6, from Sabrina Dubroca.
2) Better parameter validation in pfkey_dump(), from Mark Salyzyn.
3) Fix several clang issues on powerpc in selftests, from Tanner Love.
4) cmsghdr_from_user_compat_to_kern() uses the wrong length, from Al
Viro.
5) Out of bounds access in mlx5e driver, from Raed Salem.
6) Fix transfer buffer memleak in lan78xx, from Johan Havold.
7) RCU fixups in rhashtable, from Herbert Xu.
8) Fix ipv6 nexthop refcnt leak, from Xiyu Yang.
9) vxlan FDB dump must be done under RCU, from Ido Schimmel.
10) Fix use after free in mlxsw, from Ido Schimmel.
11) Fix map leak in HASH_OF_MAPS bpf code, from Andrii Nakryiko.
12) Fix bug in mac80211 Tx ack status reporting, from Vasanthakumar
Thiagarajan.
13) Fix memory leaks in IPV6_ADDRFORM code, from Cong Wang.
14) Fix bpf program reference count leaks in mlx5 during
mlx5e_alloc_rq(), from Xin Xiong.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
vxlan: fix memleak of fdb
rds: Prevent kernel-infoleak in rds_notify_queue_get()
net/sched: The error lable position is corrected in ct_init_module
net/mlx5e: fix bpf_prog reference count leaks in mlx5e_alloc_rq
net/mlx5e: E-Switch, Specify flow_source for rule with no in_port
net/mlx5e: E-Switch, Add misc bit when misc fields changed for mirroring
net/mlx5e: CT: Support restore ipv6 tunnel
net: gemini: Fix missing clk_disable_unprepare() in error path of gemini_ethernet_port_probe()
ionic: unlock queue mutex in error path
atm: fix atm_dev refcnt leaks in atmtcp_remove_persistent
net: ethernet: mtk_eth_soc: fix MTU warnings
net: nixge: fix potential memory leak in nixge_probe()
devlink: ignore -EOPNOTSUPP errors on dumpit
rxrpc: Fix race between recvmsg and sendmsg on immediate call failure
MAINTAINERS: Replace Thor Thayer as Altera Triple Speed Ethernet maintainer
selftests/bpf: fix netdevsim trap_flow_action_cookie read
ipv6: fix memory leaks on IPV6_ADDRFORM path
net/bpfilter: Initialize pos in __bpfilter_process_sockopt
igb: reinit_locked() should be called with rtnl_lock
e1000e: continue to init PHY even when failed to disable ULP
...
|
|
Use a local var to collect flags in kiocb_set_rw_flags(). That spares
some memory writes and allows to replace most of the jumps with MOVEcc.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into locking/core
Pull v5.9 KCSAN bits from Paul E. McKenney.
Perhaps the most important change is that GCC 11 now has all fixes in place
to support KCSAN, so GCC support can be enabled again.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Rather that hide their purpose in some dark, damp corner of Documentation/,
add some documentation to the default implementations.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200731192016.7484-2-valentin.schneider@arm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2020-07-31
1) Fix policy matching with mark and mask on userspace interfaces.
From Xin Long.
2) Several fixes for the new ESP in TCP encapsulation.
From Sabrina Dubroca.
3) Fix crash when the hold queue is used. The assumption that
xdst->path and dst->child are not a NULL pointer only if dst->xfrm
is not a NULL pointer is true with the exception of using the
hold queue. Fix this by checking for hold queue usage before
dereferencing xdst->path or dst->child.
4) Validate pfkey_dump parameter before sending them.
From Mark Salyzyn.
5) Fix the location of the transport header with ESP in UDPv6
encapsulation. From Sabrina Dubroca.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Some I2C core improvements to prevent NULL pointer usage and a
MAINTAINERS update"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: slave: add sanity check when unregistering
i2c: slave: improve sanity check when registering
MAINTAINERS: Update GENI I2C maintainers list
i2c: also convert placeholder function to return errno
|
|
* for-next/read-barrier-depends:
: Allow architectures to override __READ_ONCE()
arm64: Reduce the number of header files pulled into vmlinux.lds.S
compiler.h: Move compiletime_assert() macros into compiler_types.h
checkpatch: Remove checks relating to [smp_]read_barrier_depends()
include/linux: Remove smp_read_barrier_depends() from comments
tools/memory-model: Remove smp_read_barrier_depends() from informal doc
Documentation/barriers/kokr: Remove references to [smp_]read_barrier_depends()
Documentation/barriers: Remove references to [smp_]read_barrier_depends()
locking/barriers: Remove definitions for [smp_]read_barrier_depends()
alpha: Replace smp_read_barrier_depends() usage with smp_[r]mb()
vhost: Remove redundant use of read_barrier_depends() barrier
asm/rwonce: Don't pull <asm/barrier.h> into 'asm-generic/rwonce.h'
asm/rwonce: Remove smp_read_barrier_depends() invocation
alpha: Override READ_ONCE() with barriered implementation
asm/rwonce: Allow __READ_ONCE to be overridden by the architecture
compiler.h: Split {READ,WRITE}_ONCE definitions out into rwonce.h
tools: bpf: Use local copy of headers including uapi/linux/filter.h
|
|
* for-next/tlbi:
: Support for TTL (translation table level) hint in the TLB operations
arm64: tlb: Use the TLBI RANGE feature in arm64
arm64: enable tlbi range instructions
arm64: tlb: Detect the ARMv8.4 TLBI RANGE feature
arm64: tlb: don't set the ttl value in flush_tlb_page_nosync
arm64: Shift the __tlbi_level() indentation left
arm64: tlb: Set the TTL field in flush_*_tlb_range
arm64: tlb: Set the TTL field in flush_tlb_range
tlb: mmu_gather: add tlb_flush_*_range APIs
arm64: Add tlbi_user_level TLB invalidation helper
arm64: Add level-hinted TLB invalidation helper
arm64: Document SW reserved PTE/PMD bits in Stage-2 descriptors
arm64: Detect the ARMv8.4 TTL feature
|
|
'for-next/cpufeature', 'for-next/acpi', 'for-next/perf', 'for-next/timens', 'for-next/msi-iommu' and 'for-next/trivial' into for-next/core
* for-next/misc:
: Miscellaneous fixes and cleanups
arm64: use IRQ_STACK_SIZE instead of THREAD_SIZE for irq stack
arm64/mm: save memory access in check_and_switch_context() fast switch path
recordmcount: only record relocation of type R_AARCH64_CALL26 on arm64.
arm64: Reserve HWCAP2_MTE as (1 << 18)
arm64/entry: deduplicate SW PAN entry/exit routines
arm64: s/AMEVTYPE/AMEVTYPER
arm64/hugetlb: Reserve CMA areas for gigantic pages on 16K and 64K configs
arm64: stacktrace: Move export for save_stack_trace_tsk()
smccc: Make constants available to assembly
arm64/mm: Redefine CONT_{PTE, PMD}_SHIFT
arm64/defconfig: Enable CONFIG_KEXEC_FILE
arm64: Document sysctls for emulated deprecated instructions
arm64/panic: Unify all three existing notifier blocks
arm64/module: Optimize module load time by optimizing PLT counting
* for-next/vmcoreinfo:
: Export the virtual and physical address sizes in vmcoreinfo
arm64/crash_core: Export TCR_EL1.T1SZ in vmcoreinfo
crash_core, vmcoreinfo: Append 'MAX_PHYSMEM_BITS' to vmcoreinfo
* for-next/cpufeature:
: CPU feature handling cleanups
arm64/cpufeature: Validate feature bits spacing in arm64_ftr_regs[]
arm64/cpufeature: Replace all open bits shift encodings with macros
arm64/cpufeature: Add remaining feature bits in ID_AA64MMFR2 register
arm64/cpufeature: Add remaining feature bits in ID_AA64MMFR1 register
arm64/cpufeature: Add remaining feature bits in ID_AA64MMFR0 register
* for-next/acpi:
: ACPI updates for arm64
arm64/acpi: disallow writeable AML opregion mapping for EFI code regions
arm64/acpi: disallow AML memory opregions to access kernel memory
* for-next/perf:
: perf updates for arm64
arm64: perf: Expose some new events via sysfs
tools headers UAPI: Update tools's copy of linux/perf_event.h
arm64: perf: Add cap_user_time_short
perf: Add perf_event_mmap_page::cap_user_time_short ABI
arm64: perf: Only advertise cap_user_time for arch_timer
arm64: perf: Implement correct cap_user_time
time/sched_clock: Use raw_read_seqcount_latch()
sched_clock: Expose struct clock_read_data
arm64: perf: Correct the event index in sysfs
perf/smmuv3: To simplify code for ioremap page in pmcg
* for-next/timens:
: Time namespace support for arm64
arm64: enable time namespace support
arm64/vdso: Restrict splitting VVAR VMA
arm64/vdso: Handle faults on timens page
arm64/vdso: Add time namespace page
arm64/vdso: Zap vvar pages when switching to a time namespace
arm64/vdso: use the fault callback to map vvar pages
* for-next/msi-iommu:
: Make the MSI/IOMMU input/output ID translation PCI agnostic, augment the
: MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID bus-specific parameter
: and apply the resulting changes to the device ID space provided by the
: Freescale FSL bus
bus: fsl-mc: Add ACPI support for fsl-mc
bus/fsl-mc: Refactor the MSI domain creation in the DPRC driver
of/irq: Make of_msi_map_rid() PCI bus agnostic
of/irq: make of_msi_map_get_device_domain() bus agnostic
dt-bindings: arm: fsl: Add msi-map device-tree binding for fsl-mc bus
of/device: Add input id to of_dma_configure()
of/iommu: Make of_map_rid() PCI agnostic
ACPI/IORT: Add an input ID to acpi_dma_configure()
ACPI/IORT: Remove useless PCI bus walk
ACPI/IORT: Make iort_msi_map_rid() PCI agnostic
ACPI/IORT: Make iort_get_device_domain IRQ domain agnostic
ACPI/IORT: Make iort_match_node_callback walk the ACPI namespace for NC
* for-next/trivial:
: Trivial fixes
arm64: sigcontext.h: delete duplicated word
arm64: ptrace.h: delete duplicated word
arm64: pgtable-hwdef.h: delete duplicated words
|
|
Pull rdma fixes from Jason Gunthorpe:
"Two more merge window regressions, a corruption bug in hfi1 and a few
other small fixes.
- Missing user input validation regression in ucma
- Disallowing a previously allowed user combination regression in
mlx5
- ODP prefetch memory leaking triggerable by userspace
- Memory corruption in hf1 due to faulty ring buffer logic
- Missed mutex initialization crash in mlx5
- Two small defects with RDMA DIM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/core: Free DIM memory in error unwind
RDMA/core: Stop DIM before destroying CQ
RDMA/mlx5: Initialize QP mutex for the debug kernels
IB/rdmavt: Fix RQ counting issues causing use of an invalid RWQE
RDMA/mlx5: Allow providing extra scatter CQE QP flag
RDMA/mlx5: Fix prefetch memory leak if get_prefetchable_mr fails
RDMA/cm: Add min length checks to user structure copies
|
|
Conflicts:
arch/arm/include/asm/percpu.h
As Stephen Rothwell noted, there's a conflict between this commit
in locking/core:
a21ee6055c30 ("lockdep: Change hardirq{s_enabled,_context} to per-cpu variables")
and this fresh upstream commit:
aa54ea903abb ("ARM: percpu.h: fix build error")
a21ee6055c30 is a simpler solution to the dependency problem and doesn't
further increase header hell - so this conflict resolution effectively
reverts aa54ea903abb and uses the a21ee6055c30 solution.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
To improve the general usefulness of the IRQ state trace events with
KCSAN enabled, save and restore the trace information when entering and
exiting the KCSAN runtime as well as when generating a KCSAN report.
Without this, reporting the IRQ trace events (whether via a KCSAN report
or outside of KCSAN via a lockdep report) is rather useless due to
continuously being touched by KCSAN. This is because if KCSAN is
enabled, every instrumented memory access causes changes to IRQ trace
events (either by KCSAN disabling/enabling interrupts or taking
report_lock when generating a report).
Before "lockdep: Prepare for NMI IRQ state tracking", KCSAN avoided
touching the IRQ trace events via raw_local_irq_save/restore() and
lockdep_off/on().
Fixes: 248591f5d257 ("kcsan: Make KCSAN compatible with new IRQ state tracking")
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200729110916.3920464-2-elver@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Refactor the IRQ trace events fields, used for printing information
about the IRQ trace events, into a separate struct 'irqtrace_events'.
This improves readability by separating the information only used in
reporting, as well as enables (simplified) storing/restoring of
irqtrace_events snapshots.
No functional change intended.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200729110916.3920464-1-elver@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
- Add unzstd() and the zstd decompress interface.
- Add zstd support to decompress_method().
The decompress_method() and unzstd() functions are used to decompress
the initramfs and the initrd. The __decompress() function is used in
the preboot environment to decompress a zstd compressed kernel.
The zstd decompression function allows the input and output buffers to
overlap because that is used by x86 kernel decompression.
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200730190841.2071656-3-nickrterrell@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DT additional updates for 5.9
For SC7180 this adds the necessary properties for blowing fuses in
qfprom, Coresight fixes, GPU interconnect votes and specifies max speed
for USB controller.
SM8150 and SM8250 gains Adreno SMMU, the graphics management unit and
the GPU nodes, to enable headless GPU usage.
SDM845 gains tracing support for deep idle, GPU bus bandwidth scaling
and DB845c gains the LT9611 HDMI bridge wired up.
MSM8994 gains SMD RPM and SCM support and a new dts for the Sony Xperia
Z5.
MSM8992 is refactored and modernized and gets support for SCM, SPMI,
BLSP2 UART and I2C nodes, PMU, RPM clock controller, PSCI and proper CPU
definitions. Support for the Xiaomi Libra and Microsoft Lumia 950 are
added.
* tag 'qcom-arm64-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (31 commits)
arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree
arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree
arm64: dts: qcom: msm8992: Add RPMCC node
arm64: dts: qcom: msm8992: Add PSCI support.
arm64: dts: qcom: msm8992: Add PMU node
arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes
arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter device
arm64: dts: qcom: msm8992: Add a SCM node
arm64: dts: qcom: msm8992: Add a proper CPU map
arm64: dts: qcom: bullhead: Move UART pinctrl to SoC
arm64: dts: qcom: bullhead: Add qcom,msm-id
arm64: dts: qcom: msm8992: Fix SDHCI1
arm64: dts: qcom: msm8992: Modernize the DTS style
arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead.
arm64: dts: qcom: msm8994: Add support for SMD RPM
arm64: dts: qcom: msm8992: Add a label to rpm-requests
arm64: dts: qcom: msm8994: Add SCM node
arm64: dts: qcom: sdm845-db845c: Add hdmi bridge nodes
arm64: dts: qcom: add sm8250 GPU nodes
...
Link: https://lore.kernel.org/r/20200730052003.649940-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add mpi_sub_ui() based on Gnu MP mpz_sub_ui() function from file
mpz/aors_ui.h[1] from change id 510b83519d1c adapting the code to the
kernel's data structures, helper functions and coding style and also
removing the defines used to produce mpz_sub_ui() and mpz_add_ui()
from the same code.
[1] https://gmplib.org/repo/gmp-6.2/file/510b83519d1c/mpz/aors.h
Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
IPV6_ADDRFORM causes resource leaks when converting an IPv6 socket
to IPv4, particularly struct ipv6_ac_socklist. Similar to
struct ipv6_mc_socklist, we should just close it on this path.
This bug can be easily reproduced with the following C program:
#include <stdio.h>
#include <string.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <arpa/inet.h>
int main()
{
int s, value;
struct sockaddr_in6 addr;
struct ipv6_mreq m6;
s = socket(AF_INET6, SOCK_DGRAM, 0);
addr.sin6_family = AF_INET6;
addr.sin6_port = htons(5000);
inet_pton(AF_INET6, "::ffff:192.168.122.194", &addr.sin6_addr);
connect(s, (struct sockaddr *)&addr, sizeof(addr));
inet_pton(AF_INET6, "fe80::AAAA", &m6.ipv6mr_multiaddr);
m6.ipv6mr_interface = 5;
setsockopt(s, SOL_IPV6, IPV6_JOIN_ANYCAST, &m6, sizeof(m6));
value = AF_INET;
setsockopt(s, SOL_IPV6, IPV6_ADDRFORM, &value, sizeof(value));
close(s);
return 0;
}
Reported-by: ch3332xr@gmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull the v5.9 RCU bits from Paul E. McKenney:
- Documentation updates
- Miscellaneous fixes
- kfree_rcu updates
- RCU tasks updates
- Read-side scalability tests
- SRCU updates
- Torture-test updates
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Daniel Díaz and Kees Cook independently reported that commit
f227e3ec3b5c ("random32: update the net random state on interrupt and
activity") broke arm64 due to a circular dependency on include files
since the addition of percpu.h in random.h.
The correct fix would definitely be to move all the prandom32 stuff out
of random.h but for backporting, a smaller solution is preferred.
This one replaces linux/percpu.h with asm/percpu.h, and this fixes the
problem on x86_64, arm64, arm, and mips. Note that moving percpu.h
around didn't change anything and that removing it entirely broke
differently. When backporting, such options might still be considered
if this patch fails to help.
[ It turns out that an alternate fix seems to be to just remove the
troublesome <asm/pointer_auth.h> remove from the arm64 <asm/smp.h>
that causes the circular dependency.
But we might as well do the whole belt-and-suspenders thing, and
minimize inclusion in <linux/random.h> too. Either will fix the
problem, and both are good changes. - Linus ]
Reported-by: Daniel Díaz <daniel.diaz@linaro.org>
Reported-by: Kees Cook <keescook@chromium.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Fixes: f227e3ec3b5c
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It turns out that the plugin right now ends up being really unhappy
about the change from 'static' to 'extern' storage that happened in
commit f227e3ec3b5c ("random32: update the net random state on interrupt
and activity").
This is probably a trivial fix for the latent_entropy plugin, but for
now, just remove net_rand_state from the list of things the plugin
worries about.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Cited commit mistakenly removed the trap group for externally routed
packets (e.g., via the management interface) and grouped locally routed
and externally routed packet traps under the same group, thereby
subjecting them to the same policer.
This can result in problems, for example, when FRR is restarted and
suddenly all transient traffic is trapped to the CPU because of a
default route through the management interface. Locally routed packets
required to re-establish a BGP connection will never reach the CPU and
the routing tables will not be re-populated.
Fix this by using a different trap group for externally routed packets.
Fixes: 8110668ecd9a ("mlxsw: spectrum_trap: Register layer 3 control traps")
Reported-by: Alex Veber <alexve@mellanox.com>
Tested-by: Alex Veber <alexve@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The lookaside count is improperly initialized to the size of the
Receive Queue with the additional +1. In the traces below, the
RQ size is 384, so the count was set to 385.
The lookaside count is then rarely refreshed. Note the high and
incorrect count in the trace below:
rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9008 wr_id 55c7206d75a0 qpn c
qpt 2 pid 3018 num_sge 1 head 1 tail 0, count 385
rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1
The head,tail indicate there is only one RWQE posted although the count
says 385 and we correctly return the element 0.
The next call to rvt_get_rwqe with the decremented count:
rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9058 wr_id 0 qpn c
qpt 2 pid 3018 num_sge 0 head 1 tail 1, count 384
rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1
Note that the RQ is empty (head == tail) yet we return the RWQE at tail 1,
which is not valid because of the bogus high count.
Best case, the RWQE has never been posted and the rc logic sees an RWQE
that is too small (all zeros) and puts the QP into an error state.
In the worst case, a server slow at posting receive buffers might fool
rvt_get_rwqe() into fetching an old RWQE and corrupt memory.
Fix by deleting the faulty initialization code and creating an
inline to fetch the posted count and convert all callers to use
new inline.
Fixes: f592ae3c999f ("IB/rdmavt: Fracture single lock used for posting and processing RWQEs")
Link: https://lore.kernel.org/r/20200728183848.22226.29132.stgit@awfm-01.aw.intel.com
Reported-by: Zhaojuan Guo <zguo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.4.x
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Tested-by: Honggang Li <honli@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
