| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Resolved the merge conflict in HD-audio Tegra driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
It turned out that the recent simplification of HD-audio bus access
helpers caused a regression on the virtual HD-audio device on QEMU
with ARM platforms. The driver got a CORB/RIRB timeout and couldn't
probe any codecs.
The essential difference that caused a problem was the enforced
aligned MMIO accesses by simplification. Since snd-hda-tegra driver
is enabled on ARM, it enables CONFIG_SND_HDA_ALIGNED_MMIO, which makes
the all HD-audio drivers using the aligned MMIO accesses. While this
is mandatory for snd-hda-tegra, it seems that snd-hda-intel on ARM
gets broken by this access pattern.
For addressing the regression, this patch introduces a new flag,
aligned_mmio, to hdac_bus object, and applies the aligned MMIO only
when this flag is set. This change affects only platforms with
CONFIG_SND_HDA_ALIGNED_MMIO set, i.e. mostly only for ARM platforms.
Unfortunately the patch became a big bigger than it should be, just
because the former calls didn't take hdac_bus object in the argument,
hence we had to extend the call patterns.
Fixes: 19abfefd4c76 ("ALSA: hda: Direct MMIO accesses")
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1161152
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200120104127.28985-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In the commit 8e85def5723e ("ALSA: hda: enable regmap internal
locking"), we re-enabled the regmap lock due to the reported
regression that showed the possible concurrent accesses. It was a
temporary workaround, and there are still a few opened races even
after the revert. In this patch, we cover those still opened windows
with a proper mutex lock and disable the regmap internal lock again.
First off, the patch introduces a new snd_hdac_device.regmap_lock
mutex that is applied for each snd_hdac_regmap_*() call, including
read, write and update helpers. The mutex is applied carefully so
that it won't block the self-power-up procedure in the helper
function. Also, this assures the protection for the accesses without
regmap, too.
The snd_hdac_regmap_update_raw() is refactored to use the standard
regmap_update_bits_check() function instead of the open-code. The
non-regmap case is still open-coded but it's an easy part. The all
read and write operations are in the single mutex protection, so it's
now race-free.
In addition, a couple of new helper functions are added:
snd_hdac_regmap_update_raw_once() and snd_hdac_regmap_sync(). Both
are called from HD-audio legacy driver. The former is to initialize
the given verb bits but only once when it's not initialized yet. Due
to this condition, the function invokes regcache_cache_only(), and
it's now performed inside the regmap_lock (formerly it was racy) too.
The latter function is for simply invoking regcache_sync() inside the
regmap_lock, which is called from the codec resume call path.
Along with that, the HD-audio codec driver code is slightly modified /
simplified to adapt those new functions.
And finally, snd_hdac_regmap_read_raw(), *_write_raw(), etc are
rewritten with the helper macro. It's just for simplification because
the code logic is identical among all those functions.
Tested-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200109090104.26073-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Declare the arrays passed to the helper functions for legacy resources
(mostly for ISA drivers) as const, so that each caller can make its
static data as const for minor optimizations, too.
Link: https://lore.kernel.org/r/20200105144823.29547-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The current implementation of ALSA control API fully relies on the
callbacks of each driver, and there is no verification of the values
passed via API. This patch is an attempt to improve the situation
slightly by adding the validation code for the values stored via info
and get callbacks.
The patch adds a new kconfig, CONFIG_SND_CTL_VALIDATION. It depends
on CONFIG_SND_DEBUG and off as default since the validation would
require a slight overhead including the additional call of info
callback at each get callback invocation.
When this config is enabled, the values stored by each info callback
invocation are verified, namely:
- Whether the info type is valid
- Whether the number of enum items is non-zero
- Whether the given info count is within the allowed boundary
Similarly, the values stored at each get callback are verified as
well:
- Whether the values are within the given range
- Whether the values are aligned with the given step
- Whether any further changes are seen in the data array over the
given info count
The last point helps identifying a possibly invalid data type access,
typically a case where the info callback declares the type being
SNDRV_CTL_ELEM_TYPE_ENUMERATED while the get/put callbacks store
the values in value.integer.value[] array.
When a validation fails, the ALSA core logs an error message including
the device and the control ID, and the API call also returns an
error. So, with the new validation turned on, the driver behavior
difference may be visible on user-space, too -- it's intentional,
though, so that we can catch an error more clearly.
The patch also introduces a new ctl access type,
SNDRV_CTL_ELEM_ACCESS_SKIP_CHECK. A driver may pass this flag with
other access bits to indicate that the ctl element won't be verified.
It's useful when a driver code is specially written to access the data
greater than info->count size by some reason. For example, this flag
is actually set now in HD-audio HDMI codec driver which needs to clear
the data array in the case of the disconnected monitor.
Also, the PCM channel-map helper code is slightly modified to avoid
the false-positive hit by this validation code, too.
Link: https://lore.kernel.org/r/20200104083556.27789-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Both snd_vx_hardware and snd_vx_ops are only referred without
modification, hence they can be constified gracefully for further
optimizations.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-31-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Change the argument of snd_midi_process_event() to receive a const
snd_midi_op pointer and its callers respectively. This allows further
optimizations.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-30-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The reference to snd_info_entry_ops is rather read-only, so declare it
as a const pointer. This allows a bit more optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-29-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This is a preliminary patch to allow const for snd_ac97_bus_ops
definitions in each driver's code. The ops reference is read-only,
hence it can be declared as const for further optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-23-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This is a preliminary patch to allow const for snd_device_ops
definitions in each driver's code. The ops reference is read-only,
hence it can be declared as const for further optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
A few uapi/sound/*.h headers have been corrected for recovering from
the compile errors with the existing user-space code (alsa-lib) by the
recent commits. OTOH, these introduced another regression, as now
linux/types.h inclusion became mandatory for the uapi header checks.
As a compromise, this patch re-adds linux/types.h inclusions again,
but conditionally not to break other non-standard user-space stuff
again.
Fixes: 2e4688676392 ("ALSA: emu10k1: Make uapi/emu10k1.h compilable again")
Fixes: d63e63d42107 ("ALSA: hdsp: Make uapi/hdsp.h compilable again")
Fixes: 4fa406caf950 ("ALSA: hdspm: Drop linux/types.h inclusion in uapi header")
Reported-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20191230212742.28925-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The recent change to bump the ALSA control API protocol version from
2.0.7 to 2.1.0 caused a regression on user-space; while the user-space
expects both the major and the minor versions to be identical with the
supported numbers, we changed the minor number from 0 to 1.
For recovering from the incompatibility, this patch changes the
protocol version again to 2.0.8, which is compatible, but yet higher
than the original number 2.0.7, indicating that the protocol change.
Fixes: bd3eb4e87eb3 ("ALSA: ctl: bump protocol version up to v2.1.0")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/s5h1rsr769i.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In a development period for v5.6 kernel, some changes are introduced to
structures in ALSA control interface:
- 'tstamp' member is removed from 'struct snd_ctl_elem_value
- 'TSTAMP' flag is removed from a set of access flags for 'struct
snd_ctl_elem_info'
- 'dimen' member is removed from 'struct snd_ctl_elem_info
Although these changes were introduced with enough consideration for
backward compatibility, they include slightly lose of it. This commit
bumps protocol version of ALSA control interface up to v2.1.0.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191223023921.8151-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The 'dimen' member of 'struct snd_ctl_elem_info' is designed to deliver
information to use an array of value as multi-dimensional values. This
feature is used just by echoaudio PCI driver, and fortunately it's not
used by the other applications than 'echomixer' in alsa-tools.
In a previous commit, usage of 'dimen' member is removed from echoaudio
PCI driver. Nowadays no driver/application use the feature.
This commit removes the member from structure.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191223023921.8151-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In a former commit, 'tstamp' member was removed from 'struct
snd_ctl_elem_value' in a middle way toward solution of Y2038 issue. In a
protocol of ALSA control interface, this member is designed to deliver
timestamp information in the value structure when the target element
supports SNDRV_CTL_ELEM_ACCESS_TIMESTAMP flag.
Actually, the feature is neither used by kernel space nor user space,
especiall alsa-lib has no API for the feature. Therefore it's reasonable
to remove both of them. Practically, the timestamp information
corresponds to no information about type of clock ID. It can bring
confusions to applications.
Reference: a4e7dd35b9da ("ALSA: Avoid using timespec for struct snd_ctl_elem_value")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191223023921.8151-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We kept some typedefs in uapi/sound/*.h so that the programs in
alsa-tools can be built. Now that alsa-lib takes these and applies
the workarounds in its own, we don't need these typedefs any longer in
the kernel uapi side. Let's drop them.
Link: https://lore.kernel.org/r/20191220161555.20232-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The asound.h isn't always available while asoc.h itself is distributed
in alsa-lib package. So we need to avoid the unnecessary inclusion of
asound.h from there.
Link: https://lore.kernel.org/r/20191220153415.2740-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The recent changes in uapi/asoundlib.h caused some build errors in
alsa-lib side because of a typo and the new included files.
Basically asound.h is supposed to be usable also on non-Linux systems,
so we've tried to avoid the Linux-specific include files.
This patch is an attempt to recover from those changes.
Fixes: 3ddee7f88aaf ("ALSA: Avoid using timespec for struct snd_pcm_status")
Fixes: 80fe7430c708 ("ALSA: add new 32-bit layout for snd_pcm_mmap_status/control")
Link: https://lore.kernel.org/r/20191220153415.2740-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The hdspm.h uapi header has been used also from non-Linux or platforms
that don't have linux/*.h. It was OK in the past because alsa-lib
contained the modified version of this header file, but now it tries
to the verbatim copy, so it broke the build. This fixes it again.
Link: https://lore.kernel.org/r/20191220153415.2740-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Recently alsa-lib updated its content of sound/hdsp.h just by copying
the latest Linus kernel uapi/*.h, and this broke the build of
alsa-tools programs. We used to modify the headers so that they can
be built without asoundlib.h and linux kernel headers, and the
verbatim copy doesn't work as is.
This patch removes again the linux/types.h inclusion and drop __user
prefix that broke the build and adjusts the corresponding code.
Link: https://lore.kernel.org/r/20191220153415.2740-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Recently we updated the content in alsa-lib uapi header files by just
copying from the latest Linus kernel uapi/*.h, and noticed that it
broke the build of some alsa-tools programs. The reason is that we
used to have a modified version in the past, so that the program can
be built without referring to the unexported stuff like
snd_ctl_elem_id or __user prefix.
This patch attempts to restore that, i.e. dropping the stuff that
can't be referred in the user-space. For adapting the changes in
uapi/emu10k1.h, the emu10k1 driver code is also slightly modified.
Most of changes are pointer cast.
Link: https://lore.kernel.org/r/20191220153415.2740-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Taking the 5.5 devel branch back into the main devel branch.
A USB-audio fix needs to be adjusted to adapt the changes that have
been formerly applied for stop_sync.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground into for-next
ALSA: Fix year 2038 issue for sound subsystem
This is a series I worked on with Baolin in 2017 and 2018, but we
never quite managed to finish up the last pieces. During the
ALSA developer meetup at ELC-E 2018 in Edinburgh, a decision was
made to go with this approach for keeping best compatibility
with existing source code, and then I failed to follow up by
resending the patches.
Now I have patches for all remaining time_t uses in the kernel,
so it's absolutely time to revisit them. I have done more
review of the patches myself and found a couple of minor issues
that I have fixed up, otherwise the series is still the same as
before.
Conceptually, the idea of these patches is:
- 64-bit applications should see no changes at all, neither
compile-time nor run-time.
- 32-bit code compiled with a 64-bit time_t currently
does not work with ALSA, and requires kernel changes and/or
sound/asound.h changes
- Most 32-bit code using these interfaces will work correctly
on a modified kernel, with or without the uapi header changes.
- 32-bit code using SNDRV_TIMER_IOCTL_TREAD requires the
updated header file for 64-bit time_t support
- 32-bit i386 user space with 64-bit time_t is broken for
SNDRV_PCM_IOCTL_STATUS, SNDRV_RAWMIDI_IOCTL_STATUS and
SNDRV_PCM_IOCTL_SYNC_PTR because of i386 alignment. This is also
addressed by the updated uapi header.
- PCM mmap is currently supported on native x86 kernels
(both 32-bit and 64-bit) but not for compat mode. This series breaks
the 32-bit native mmap support for 32-bit time_t, but instead allows
it for 64-bit time_t on both native and compat kernels. This seems to
be the best trade-off, as mmap support is optional already, and most
32-bit code runs in compat mode anyway.
- I've tried to avoid breaking compilation of 32-bit code
as much as possible. Anything that does break however is likely code
that is already broken on 64-bit time_t and needs source changes to
fix them.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git y2038-alsa-v8
[2] https://lore.kernel.org/lkml/CAK8P3a2Os66+iwQYf97qh05W2JP8rmWao8zmKoHiXqVHvyYAJA@mail.gmail.com/T/#m6519cb07cfda08adf1dedea6596bb98892b4d5dc
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Changes since v7: (Arnd):
- Fix a typo found by Ben Hutchings
Changes since v6: (Arnd):
- Add a patch to update the API versions
- Hide a timespec reference in #ifndef __KERNEL__ to remove the
last reference to time_t
- Use a more readable way to do padding and describe it in the
changelog
- Rebase to linux-5.5-rc1, changing include/sound/soc-component.h
and sound/drivers/aloop.c as needed.
Changes since v5 (Arnd):
- Rebased to linux-5.4-rc4
- Updated to completely remove timespec and time_t references from alsa
- found and fixed a few bugs
Changes since v4 (Baolin):
- Add patch 5 to change trigger_tstamp member of struct snd_pcm_runtime.
- Add patch 8 to change internal timespec.
- Add more explanation in commit message.
- Use ktime_get_real_ts64() in patch 6.
- Split common code out into a separate function in patch 6.
- Fix tu->tread bug in patch 6 and remove #if __BITS_PER_LONG == 64 macro.
Changes since v3:
- Move struct snd_pcm_status32 to pcm.h file.
- Modify comments and commit message.
- Add new patch2 ~ patch6.
Changes since v2:
- Renamed all structures to make clear.
- Remove CONFIG_X86_X32 macro and introduced new compat_snd_pcm_status64_x86_32.
Changes since v1:
- Add one macro for struct snd_pcm_status_32 which only active in 32bits kernel.
- Convert pcm_compat.c to use struct snd_pcm_status_64.
- Convert pcm_native.c to use struct snd_pcm_status_64.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.5
A collection of fixes since the merge window, mostly driver specific but
there's a few in the core that clean up fallout from the refactorings
done in the last cycle.
|
|
Now most of the get_response handling became quite similar between
HDA-core and legacy drivers, and the only differences are:
- the handling of extra-long polling delay for some codecs
- the debug message for the stalled communication
and both are worth to share in the common code.
This patch unifies the code into snd_hdac_bus_get_response(), and use
this from the legacy get_response callback. It results in a good
amount of code reduction in the end.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191212191101.19517-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Change SNDRV_PCM_VERSION, SNDRV_RAWMIDI_VERSION and SNDRV_TIMER_VERSION
to indicate the addition of the time64 version of the mmap interface and
these ioctl commands:
SNDRV_PCM_IOCTL_SYNC
SNDRV_RAWMIDI_IOCTL_STATUS
SNDRV_PCM_IOCTL_STATUS
SNDRV_PCM_IOCTL_STATUS_EXT
SNDRV_TIMER_IOCTL_TREAD
SNDRV_TIMER_IOCTL_STATUS
32-bit applications built with 64-bit time_t require both the headers
and the running kernel to support at least the new API version. When
built with earlier kernel headers, some of these may not work
correctly, so applications are encouraged to fail compilation like
#if SNDRV_PCM_VERSION < SNDRV_PROTOCOL_VERSION(2, 0, 15)
extern int __fail_build_for_time_64[sizeof(long) - sizeof(time_t)];
#endif
or provide their own updated copy of the header file.
At runtime, the interface is unchanged for 32-bit time_t, but new
kernels are required to work with user compiled with 64-bit time_t.
A runtime check can be used to detect old kernel versions and
warn about those.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The snd_pcm_mmap_status and snd_pcm_mmap_control interfaces are one of the
trickiest areas to get right when moving to 64-bit time_t in user space.
The snd_pcm_mmap_status structure layout is incompatible with user space
that uses a 64-bit time_t, so we need a new layout for it. Since the
SNDRV_PCM_IOCTL_SYNC_PTR ioctl combines it with snd_pcm_mmap_control
into snd_pcm_sync_ptr, we need to change those two as well.
Both structures are also exported via an mmap() operation on certain
architectures, and this suffers from incompatibility between 32-bit
and 64-bit user space. As we have to change both structures anyway,
this is a good opportunity to fix the mmap() problem as well, so let's
standardize on the existing 64-bit layout of the structure where possible.
The downside is that we lose mmap() support for existing 32-bit x86 and
powerpc applications, adding that would introduce very noticeable runtime
overhead and complexity. My assumption here is that not too many people
will miss the removed feature, given that:
- Almost all x86 and powerpc users these days are on 64-bit kernels,
the majority of today's 32-bit users are on architectures that never
supported mmap (ARM, MIPS, ...).
- It never worked in compat mode (it was intentionally disabled there)
- The application already needs to work with a fallback to
SNDRV_PCM_IOCTL_SYNC_PTR, which will keep working with both the old
and new structure layout.
Both the ioctl() and mmap() based interfaces are changed at the same
time, as they are based on the same structures. Unlike other interfaces,
we change the uapi header to export both the traditional structure and
a version that is portable between 32-bit and 64-bit user space code
and that corresponds to the existing 64-bit layout. We further check the
__USE_TIME_BITS64 macro that will be defined by future C library versions
whenever we use the new time_t definition, so any existing user space
source code will not see any changes until it gets rebuilt against a new
C library. However, the new structures are all visible in addition to the
old ones, allowing applications to explicitly request the new structures.
In order to detect the difference between the old snd_pcm_mmap_status and
the new __snd_pcm_mmap_status64 structure from the ioctl command number,
we rely on one quirk in the structure definition: snd_pcm_mmap_status
must be aligned to alignof(time_t), which leads the compiler to insert
four bytes of padding in struct snd_pcm_sync_ptr after 'flags' and a
corresponding change in the size of snd_pcm_sync_ptr itself. On x86-32
(and only there), the compiler doesn't use 64-bit alignment in structure,
so I'm adding an explicit pad in the structure that has no effect on the
existing 64-bit architectures but ensures that the layout matches for x86.
The snd_pcm_uframes_t type compatibility requires another hack: we can't
easily make that 64 bit wide, so I leave the type as 'unsigned long',
but add padding before and after it, to ensure that the data is properly
aligned to the respective 64-bit field in the in-kernel structure.
For the SNDRV_PCM_MMAP_OFFSET_STATUS/CONTROL constants that are used
as the virtual file offset in the mmap() function, we also have to
introduce new constants that depend on hte __USE_TIME_BITS64 macro:
The existing macros are renamed to SNDRV_PCM_MMAP_OFFSET_STATUS_OLD
and SNDRV_PCM_MMAP_OFFSET_CONTROL_OLD, they continue to work fine on
64-bit architectures, but stop working on native 32-bit user space.
The replacement _NEW constants are now used by default for user space
built with __USE_TIME_BITS64, those now work on all new kernels for x86,
ppc and alpha (32 and 64 bit, native and compat). It might be a good idea
for a future alsa-lib to support both the _OLD and _NEW macros and use
the corresponding structures directly. Unmodified alsa-lib source code
will retain the current behavior, so it will no longer be able to use
mmap() for the status/control structures on 32-bit systems, until either
the C library gets updated to 64-bit time_t or alsa-lib gets updated to
support both mmap() layouts.
Co-developed-with: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The struct snd_timer_tread will use 'timespec' type variables to record
timestamp, which is not year 2038 safe on 32bits system.
Since the struct snd_timer_tread is passed through read() rather than
ioctl(), and the read syscall has no command number that lets us pick
between the 32-bit or 64-bit version of this structure.
Thus we introduced one new command SNDRV_TIMER_IOCTL_TREAD64 and new
struct snd_timer_tread64 replacing timespec with s64 type to handle
64bit time_t. That means we will set tu->tread = TREAD_FORMAT_64BIT
when user space has a 64bit time_t, then we will copy to user with
struct snd_timer_tread64. Otherwise we will use 32bit time_t variables
when copying to user.
Moreover this patch replaces timespec type with timespec64 type and
related y2038 safe APIs.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The struct snd_rawmidi_status will use 'timespec' type variables to record
timestamp, which is not year 2038 safe on 32bits system.
Thus we introduced 'struct snd_rawmidi_status32' and 'struct snd_rawmidi_status64'
to handle 32bit time_t and 64bit time_t in native mode, which replace
timespec with s64 type.
In compat mode, we renamed or introduced new structures to handle 32bit/64bit
time_t in compatible mode. The 'struct snd_rawmidi_status32' and
snd_rawmidi_ioctl_status32() are used to handle 32bit time_t in compat mode.
'struct compat_snd_rawmidi_status64' is used to handle 64bit time_t.
When glibc changes time_t to 64-bit, any recompiled program will issue ioctl
commands that the kernel does not understand without this patch.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The struct snd_pcm_status will use 'timespec' type variables to record
timestamp, which is not year 2038 safe on 32bits system.
Userspace will use SNDRV_PCM_IOCTL_STATUS and SNDRV_PCM_IOCTL_STATUS_EXT
as commands to issue ioctl() to fill the 'snd_pcm_status' structure in
userspace. The command number is always defined through _IOR/_IOW/IORW,
so when userspace changes the definition of 'struct timespec' to use
64-bit types, the command number also changes.
Thus in the kernel, we now need to define two versions of each such ioctl
and corresponding ioctl commands to handle 32bit time_t and 64bit time_t
in native mode:
struct snd_pcm_status32 {
......
s32 trigger_tstamp_sec;
s32 trigger_tstamp_nsec;
......
s32 audio_tstamp_sec;
s32 audio_tstamp_nsec;
......
};
struct snd_pcm_status64 {
......
s32 trigger_tstamp_sec;
s32 trigger_tstamp_nsec;
......
s32 audio_tstamp_sec;
s32 audio_tstamp_nsec;
......
};
Moreover in compat file, we renamed or introduced new structures to handle
32bit/64bit time_t in compatible mode. The 'struct snd_pcm_status32' and
snd_pcm_status_user32() are used to handle 32bit time_t in compat mode.
'struct compat_snd_pcm_status64' and snd_pcm_status_user_compat64() are used
to handle 64bit time_t.
The implicit padding before timespec is made explicit to avoid incompatible
structure layout between 32-bit and 64-bit x86 due to the different
alignment requirements, and the snd_pcm_status structure is now hidden
from the kernel to avoid relying on the timespec definitio definitionn
Finally we can replace SNDRV_PCM_IOCTL_STATUS and SNDRV_PCM_IOCTL_STATUS_EXT
with new commands and introduce new functions to fill new 'struct snd_pcm_status64'
instead of using unsafe 'struct snd_pcm_status'. Then in future, the new
commands can be matched when userspace changes 'timespec' to 64bit type
to make a size change of 'struct snd_pcm_status'. When glibc changes time_t
to 64-bit, any recompiled program will issue ioctl commands that the kernel
does not understand without this patch.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The struct snd_ctl_elem_value will use 'timespec' type variables to record
timestamp, which is not year 2038 safe on 32bits system.
Since there are no drivers will implemented the tstamp member of the
struct snd_ctl_elem_value, and also the stucture size will not be changed
if we change timespec to s64 for tstamp member of struct snd_ctl_elem_value.
From Takashi's comments, "In the library, applications are not expected
to access to this structure directly. The applications get opaque pointer
to the structure and must use any control APIs to operate it. Actually the
library produce no API to handle 'struct snd_ctl_elem_value.tstamp'. This
means that we can drop this member from alsa-lib without decline of
functionality." Thus we can simply remove the tstamp member to avoid using
the type which is not year 2038 safe on 32bits system.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
struct snd_timer_status uses 'timespec' type variables to record
timestamp, which will be changed to an incompatible layout with
updated user space using 64-bit time_t.
To handle both the old and the new layout on 32-bit architectures,
this patch introduces 'struct snd_timer_status32' and 'struct snd_timer_status64'
to handle 32bit time_t and 64bit time_t in native mode and compat mode,
which replaces timespec with s64 type.
When glibc changes time_t to 64-bit, any recompiled program will issue
ioctl commands that the kernel does not understand without this patch.
In the public uapi header, snd_timer_status is now guarded by
an #ifndef __KERNEL__ to avoid referencing 'struct timespec'.
The timespec definition will be removed from the kernel to prevent
new y2038 bugs and to avoid the conflict with an incompatible libc
type of the same name.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Since timespec is not year 2038 safe on 32bit system, and we need to
convert all timespec variables to timespec64 type for sound subsystem.
This patch is used to do preparation for following patches, that will
convert all structures defined in uapi/sound/asound.h to use 64-bit
time_t.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The HD-audio CORB/RIRB communication was programmed in a way that was
documented in the reference in decades ago, which is essentially a
polling in the waiter side. It's working fine but costs CPU cycles on
some platforms that support only slow communications. Also, for some
platforms that had unreliable communications, we put longer wait time
(2 ms), which accumulate quite long time if you execute many verbs in
a shot (e.g. at the initialization or resume phase).
This patch attempts to improve the situation by introducing the
standard waitqueue in the RIRB waiter side instead of polling. The
test results on my machine show significant improvements. The time
spent for "cat /proc/asound/card*/codec#*" were changed like:
* Intel SKL + Realtek codec
before the patch:
0.00user 0.04system 0:00.10elapsed 40.0%CPU
after the patch:
0.00user 0.01system 0:00.10elapsed 10.0%CPU
* Nvidia GP107GL + Nvidia HDMI codec
before the patch:
0.00user 0.00system 0:02.76elapsed 0.0%CPU
after the patch:
0.00user 0.00system 0:00.01elapsed 17.0%CPU
So, for Intel chips, the total time is same, while the total time is
greatly reduced (from 2.76 to 0.01s) for Nvidia chips.
The only negative data here is the increase of CPU time for Nvidia,
but this is the unavoidable cost for faster wakeups, supposedly.
Link: https://lore.kernel.org/r/20191210145727.22054-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull networking fixes from David Miller:
1) More jumbo frame fixes in r8169, from Heiner Kallweit.
2) Fix bpf build in minimal configuration, from Alexei Starovoitov.
3) Use after free in slcan driver, from Jouni Hogander.
4) Flower classifier port ranges don't work properly in the HW offload
case, from Yoshiki Komachi.
5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin.
6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk.
7) Fix flow dissection in dsa TX path, from Alexander Lobakin.
8) Stale syncookie timestampe fixes from Guillaume Nault.
[ Did an evil merge to silence a warning introduced by this pull - Linus ]
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
r8169: fix rtl_hw_jumbo_disable for RTL8168evl
net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add()
r8169: add missing RX enabling for WoL on RTL8125
vhost/vsock: accept only packets with the right dst_cid
net: phy: dp83867: fix hfs boot in rgmii mode
net: ethernet: ti: cpsw: fix extra rx interrupt
inet: protect against too small mtu values.
gre: refetch erspan header from skb->data after pskb_may_pull()
pppoe: remove redundant BUG_ON() check in pppoe_pernet
tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE()
tcp: tighten acceptance of ACKs not matching a child socket
tcp: fix rejected syncookies due to stale timestamps
lpc_eth: kernel BUG on remove
tcp: md5: fix potential overestimation of TCP option space
net: sched: allow indirect blocks to bind to clsact in TC
net: core: rename indirect block ingress cb function
net-sysfs: Call dev_hold always in netdev_queue_add_kobject
net: dsa: fix flow dissection on Tx path
net/tls: Fix return values to avoid ENOTSUPP
net: avoid an indirect call in ____sys_recvmsg()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull more input updates from Dmitry Torokhov:
- fixups for Synaptics RMI4 driver
- a quirk for Goodinx touchscreen on Teclast tablet
- a new keycode definition for activating privacy screen feature found
on a few "enterprise" laptops
- updates to snvs_pwrkey driver
- polling uinput device for writing (which is always allowed) now works
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers
Input: synaptics-rmi4 - re-enable IRQs in f34v7_do_reflash
Input: goodix - add upside-down quirk for Teclast X89 tablet
Input: add privacy screen toggle keycode
Input: uinput - fix returning EPOLLOUT from uinput_poll
Input: snvs_pwrkey - remove gratuitous NULL initializers
Input: snvs_pwrkey - send key events for i.MX6 S, DL and Q
|
|
Pull nfsd updates from Bruce Fields:
"This is a relatively quiet cycle for nfsd, mainly various bugfixes.
Possibly most interesting is Trond's fixes for some callback races
that were due to my incomplete understanding of rpc client shutdown.
Unfortunately at the last minute I've started noticing a new
intermittent failure to send callbacks. As the logic seems basically
correct, I'm leaving Trond's patches in for now, and hope to find a
fix in the next week so I don't have to revert those patches"
* tag 'nfsd-5.5' of git://linux-nfs.org/~bfields/linux: (24 commits)
nfsd: depend on CRYPTO_MD5 for legacy client tracking
NFSD fixing possible null pointer derefering in copy offload
nfsd: check for EBUSY from vfs_rmdir/vfs_unink.
nfsd: Ensure CLONE persists data and metadata changes to the target file
SUNRPC: Fix backchannel latency metrics
nfsd: restore NFSv3 ACL support
nfsd: v4 support requires CRYPTO_SHA256
nfsd: Fix cld_net->cn_tfm initialization
lockd: remove __KERNEL__ ifdefs
sunrpc: remove __KERNEL__ ifdefs
race in exportfs_decode_fh()
nfsd: Drop LIST_HEAD where the variable it declares is never used.
nfsd: document callback_wq serialization of callback code
nfsd: mark cb path down on unknown errors
nfsd: Fix races between nfsd4_cb_release() and nfsd4_shutdown_callback()
nfsd: minor 4.1 callback cleanup
SUNRPC: Fix svcauth_gss_proxy_init()
SUNRPC: Trace gssproxy upcall results
sunrpc: fix crash when cache_head become valid before update
nfsd: remove private bin2hex implementation
...
|
|
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Features:
- NFSv4.2 now supports cross device offloaded copy (i.e. offloaded
copy of a file from one source server to a different target
server).
- New RDMA tracepoints for debugging congestion control and Local
Invalidate WRs.
Bugfixes and cleanups
- Drop the NFSv4.1 session slot if nfs4_delegreturn_prepare waits for
layoutreturn
- Handle bad/dead sessions correctly in nfs41_sequence_process()
- Various bugfixes to the delegation return operation.
- Various bugfixes pertaining to delegations that have been revoked.
- Cleanups to the NFS timespec code to avoid unnecessary conversions
between timespec and timespec64.
- Fix unstable RDMA connections after a reconnect
- Close race between waking an RDMA sender and posting a receive
- Wake pending RDMA tasks if connection fails
- Fix MR list corruption, and clean up MR usage
- Fix another RPCSEC_GSS issue with MIC buffer space"
* tag 'nfs-for-5.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (79 commits)
SUNRPC: Capture completion of all RPC tasks
SUNRPC: Fix another issue with MIC buffer space
NFS4: Trace lock reclaims
NFS4: Trace state recovery operation
NFSv4.2 fix memory leak in nfs42_ssc_open
NFSv4.2 fix kfree in __nfs42_copy_file_range
NFS: remove duplicated include from nfs4file.c
NFSv4: Make _nfs42_proc_copy_notify() static
NFS: Fallocate should use the nfs4_fattr_bitmap
NFS: Return -ETXTBSY when attempting to write to a swapfile
fs: nfs: sysfs: Remove NULL check before kfree
NFS: remove unneeded semicolon
NFSv4: add declaration of current_stateid
NFSv4.x: Drop the slot if nfs4_delegreturn_prepare waits for layoutreturn
NFSv4.x: Handle bad/dead sessions correctly in nfs41_sequence_process()
nfsv4: Move NFSPROC4_CLNT_COPY_NOTIFY to end of list
SUNRPC: Avoid RPC delays when exiting suspend
NFS: Add a tracepoint in nfs_fh_to_dentry()
NFSv4: Don't retry the GETATTR on old stateid in nfs4_delegreturn_done()
NFSv4: Handle NFS4ERR_OLD_STATEID in delegreturn
...
|
|
This code is ancient, and goes back to when we only had a single page
for the pipe buffers. The exact history is hidden in the mists of time
(ie "before git", and in fact predates the BK repository too).
At that long-ago point in time, it actually helped to try to merge big
back-and-forth pipe reads and writes, and not limit pipe reads to the
single pipe buffer in length just because that was all we had at a time.
However, since then we've expanded the pipe buffers to multiple pages,
and this logic really doesn't seem to make sense. And a lot of it is
somewhat questionable (ie "hmm, the user asked for a non-blocking read,
but we see that there's a writer pending, so let's wait anyway to get
the extra data that the writer will have").
But more importantly, it makes the "go to sleep" logic much less
obvious, and considering the wakeup issues we've had, I want to make for
less of those kinds of things.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
syzbot was once again able to crash a host by setting a very small mtu
on loopback device.
Let's make inetdev_valid_mtu() available in include/net/ip.h,
and use it in ip_setup_cork(), so that we protect both ip_append_page()
and __ip_append_data()
Also add a READ_ONCE() when the device mtu is read.
Pairs this lockless read with one WRITE_ONCE() in __dev_set_mtu(),
even if other code paths might write over this field.
Add a big comment in include/linux/netdevice.h about dev->mtu
needing READ_ONCE()/WRITE_ONCE() annotations.
Hopefully we will add the missing ones in followup patches.
[1]
refcount_t: saturated; leaking memory.
WARNING: CPU: 0 PID: 9464 at lib/refcount.c:22 refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 9464 Comm: syz-executor850 Not tainted 5.4.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
panic+0x2e3/0x75c kernel/panic.c:221
__warn.cold+0x2f/0x3e kernel/panic.c:582
report_bug+0x289/0x300 lib/bug.c:195
fixup_bug arch/x86/kernel/traps.c:174 [inline]
fixup_bug arch/x86/kernel/traps.c:169 [inline]
do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267
do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286
invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027
RIP: 0010:refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22
Code: 06 31 ff 89 de e8 c8 f5 e6 fd 84 db 0f 85 6f ff ff ff e8 7b f4 e6 fd 48 c7 c7 e0 71 4f 88 c6 05 56 a6 a4 06 01 e8 c7 a8 b7 fd <0f> 0b e9 50 ff ff ff e8 5c f4 e6 fd 0f b6 1d 3d a6 a4 06 31 ff 89
RSP: 0018:ffff88809689f550 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff815e4336 RDI: ffffed1012d13e9c
RBP: ffff88809689f560 R08: ffff88809c50a3c0 R09: fffffbfff15d31b1
R10: fffffbfff15d31b0 R11: ffffffff8ae98d87 R12: 0000000000000001
R13: 0000000000040100 R14: ffff888099041104 R15: ffff888218d96e40
refcount_add include/linux/refcount.h:193 [inline]
skb_set_owner_w+0x2b6/0x410 net/core/sock.c:1999
sock_wmalloc+0xf1/0x120 net/core/sock.c:2096
ip_append_page+0x7ef/0x1190 net/ipv4/ip_output.c:1383
udp_sendpage+0x1c7/0x480 net/ipv4/udp.c:1276
inet_sendpage+0xdb/0x150 net/ipv4/af_inet.c:821
kernel_sendpage+0x92/0xf0 net/socket.c:3794
sock_sendpage+0x8b/0xc0 net/socket.c:936
pipe_to_sendpage+0x2da/0x3c0 fs/splice.c:458
splice_from_pipe_feed fs/splice.c:512 [inline]
__splice_from_pipe+0x3ee/0x7c0 fs/splice.c:636
splice_from_pipe+0x108/0x170 fs/splice.c:671
generic_splice_sendpage+0x3c/0x50 fs/splice.c:842
do_splice_from fs/splice.c:861 [inline]
direct_splice_actor+0x123/0x190 fs/splice.c:1035
splice_direct_to_actor+0x3b4/0xa30 fs/splice.c:990
do_splice_direct+0x1da/0x2a0 fs/splice.c:1078
do_sendfile+0x597/0xd00 fs/read_write.c:1464
__do_sys_sendfile64 fs/read_write.c:1525 [inline]
__se_sys_sendfile64 fs/read_write.c:1511 [inline]
__x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x441409
Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fffb64c4f78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441409
RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000005
RBP: 0000000000073b8a R08: 0000000000000010 R09: 0000000000000010
R10: 0000000000010001 R11: 0000000000000246 R12: 0000000000402180
R13: 0000000000402210 R14: 0000000000000000 R15: 0000000000000000
Kernel Offset: disabled
Rebooting in 86400 seconds..
Fixes: 1470ddf7f8ce ("inet: Remove explicit write references to sk/inet in ip_append_data")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Syncookies borrow the ->rx_opt.ts_recent_stamp field to store the
timestamp of the last synflood. Protect them with READ_ONCE() and
WRITE_ONCE() since reads and writes aren't serialised.
Use of .rx_opt.ts_recent_stamp for storing the synflood timestamp was
introduced by a0f82f64e269 ("syncookies: remove last_synq_overflow from
struct tcp_sock"). But unprotected accesses were already there when
timestamp was stored in .last_synq_overflow.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When no synflood occurs, the synflood timestamp isn't updated.
Therefore it can be so old that time_after32() can consider it to be
in the future.
That's a problem for tcp_synq_no_recent_overflow() as it may report
that a recent overflow occurred while, in fact, it's just that jiffies
has grown past 'last_overflow' + TCP_SYNCOOKIE_VALID + 2^31.
Spurious detection of recent overflows lead to extra syncookie
verification in cookie_v[46]_check(). At that point, the verification
should fail and the packet dropped. But we should have dropped the
packet earlier as we didn't even send a syncookie.
Let's refine tcp_synq_no_recent_overflow() to report a recent overflow
only if jiffies is within the
[last_overflow, last_overflow + TCP_SYNCOOKIE_VALID] interval. This
way, no spurious recent overflow is reported when jiffies wraps and
'last_overflow' becomes in the future from the point of view of
time_after32().
However, if jiffies wraps and enters the
[last_overflow, last_overflow + TCP_SYNCOOKIE_VALID] interval (with
'last_overflow' being a stale synflood timestamp), then
tcp_synq_no_recent_overflow() still erroneously reports an
overflow. In such cases, we have to rely on syncookie verification
to drop the packet. We unfortunately have no way to differentiate
between a fresh and a stale syncookie timestamp.
In practice, using last_overflow as lower bound is problematic.
If the synflood timestamp is concurrently updated between the time
we read jiffies and the moment we store the timestamp in
'last_overflow', then 'now' becomes smaller than 'last_overflow' and
tcp_synq_no_recent_overflow() returns true, potentially dropping a
valid syncookie.
Reading jiffies after loading the timestamp could fix the problem,
but that'd require a memory barrier. Let's just accommodate for
potential timestamp growth instead and extend the interval using
'last_overflow - HZ' as lower bound.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If no synflood happens for a long enough period of time, then the
synflood timestamp isn't refreshed and jiffies can advance so much
that time_after32() can't accurately compare them any more.
Therefore, we can end up in a situation where time_after32(now,
last_overflow + HZ) returns false, just because these two values are
too far apart. In that case, the synflood timestamp isn't updated as
it should be, which can trick tcp_synq_no_recent_overflow() into
rejecting valid syncookies.
For example, let's consider the following scenario on a system
with HZ=1000:
* The synflood timestamp is 0, either because that's the timestamp
of the last synflood or, more commonly, because we're working with
a freshly created socket.
* We receive a new SYN, which triggers synflood protection. Let's say
that this happens when jiffies == 2147484649 (that is,
'synflood timestamp' + HZ + 2^31 + 1).
* Then tcp_synq_overflow() doesn't update the synflood timestamp,
because time_after32(2147484649, 1000) returns false.
With:
- 2147484649: the value of jiffies, aka. 'now'.
- 1000: the value of 'last_overflow' + HZ.
* A bit later, we receive the ACK completing the 3WHS. But
cookie_v[46]_check() rejects it because tcp_synq_no_recent_overflow()
says that we're not under synflood. That's because
time_after32(2147484649, 120000) returns false.
With:
- 2147484649: the value of jiffies, aka. 'now'.
- 120000: the value of 'last_overflow' + TCP_SYNCOOKIE_VALID.
Of course, in reality jiffies would have increased a bit, but this
condition will last for the next 119 seconds, which is far enough
to accommodate for jiffie's growth.
Fix this by updating the overflow timestamp whenever jiffies isn't
within the [last_overflow, last_overflow + HZ] range. That shouldn't
have any performance impact since the update still happens at most once
per second.
Now we're guaranteed to have fresh timestamps while under synflood, so
tcp_synq_no_recent_overflow() can safely use it with time_after32() in
such situations.
Stale timestamps can still make tcp_synq_no_recent_overflow() return
the wrong verdict when not under synflood. This will be handled in the
next patch.
For 64 bits architectures, the problem was introduced with the
conversion of ->tw_ts_recent_stamp to 32 bits integer by commit
cca9bab1b72c ("tcp: use monotonic timestamps for PAWS").
The problem has always been there on 32 bits architectures.
Fixes: cca9bab1b72c ("tcp: use monotonic timestamps for PAWS")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With indirect blocks, a driver can register for callbacks from a device
that is does not 'own', for example, a tunnel device. When registering to
or unregistering from a new device, a callback is triggered to generate
a bind/unbind event. This, in turn, allows the driver to receive any
existing rules or to properly clean up installed rules.
When first added, it was assumed that all indirect block registrations
would be for ingress offloads. However, the NFP driver can, in some
instances, support clsact qdisc binds for egress offload.
Change the name of the indirect block callback command in flow_offload to
remove the 'ingress' identifier from it. While this does not change
functionality, a follow up patch will implement a more more generic
callback than just those currently just supporting ingress offload.
Fixes: 4d12ba42787b ("nfp: flower: allow offloading of matches on 'internal' ports")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A set of fixes that we've merged late, but for the most part that have
been sitting in -next for a while through platform maintainer trees:
- Fixes to suspend/resume on Tegra, caused by the added features this
merge window
- Cleanups and minor fixes to TI additions this merge window
- Tee fixes queued up late before the merge window, included here.
- A handful of other fixlets
There's also a refresh of the shareed config files (multi_v* on
32-bit, and defconfig on 64-bit), to avoid conflicts when we get new
contributions"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
ARM: multi_v7_defconfig: Restore debugfs support
ARM: defconfig: re-run savedefconfig on multi_v* configs
arm64: defconfig: re-run savedefconfig
ARM: pxa: Fix resource properties
soc: mediatek: cmdq: fixup wrong input order of write api
soc: aspeed: Fix snoop_file_poll()'s return type
MAINTAINERS: Switch to Marvell addresses
MAINTAINERS: update Cavium ThunderX drivers
Revert "arm64: dts: juno: add dma-ranges property"
MAINTAINERS: Make Nicolas Saenz Julienne the new bcm2835 maintainer
firmware: arm_scmi: Avoid double free in error flow
arm64: dts: juno: Fix UART frequency
ARM: dts: Fix sgx sysconfig register for omap4
arm: socfpga: execute cold reboot by default
ARM: dts: Fix vcsi regulator to be always-on for droid4 to prevent hangs
ARM: dts: dra7: fix cpsw mdio fck clock
ARM: dts: am57xx-beagle-x15: Update pinmux name to ddr_3_3v
ARM: dts: omap3-tao3530: Fix incorrect MMC card detection GPIO polarity
soc/tegra: pmc: Add reset sources and levels on Tegra194
soc/tegra: pmc: Add missing IRQ callbacks on Tegra194
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
"A few commits splitting the KASAN instrumented bitops header in three,
to match the split of the asm-generic bitops headers.
This is needed on powerpc because we use the generic bitops for the
non-atomic case only, whereas the existing KASAN instrumented bitops
assume all the underlying operations are provided by the arch as
arch_foo() versions.
Thanks to: Daniel Axtens & Christophe Leroy"
* tag 'powerpc-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
docs/core-api: Remove possibly confusing sub-headings from Bit Operations
powerpc: support KASAN instrumentation of bitops
kasan: support instrumented bitops combined with generic bitops
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull more sound updates from Takashi Iwai:
"A few last-minute updates, most of them are the regression fixes:
- AMD HD-audio HDMI runtime PM improvements
- Fixes for HD-audio HDMI regressions wrt DP-MST
- A regression fix for the previous aloop enhancement
- A fix for a long-time problem in PCM OSS layer that was spotted by
fuzzer now
- A few HD-audio quirks"
* tag 'sound-fix-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: pcm: oss: Avoid potential buffer overflows
ALSA: hda: hdmi - Keep old slot assignment behavior for Intel platforms
ALSA: hda: Modify stream stripe mask only when needed
ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen
ALSA: hda: hdmi - preserve non-MST PCM routing for Intel platforms
ALSA: hda: hdmi - fix kernel oops caused by invalid PCM idx
ALSA: hda/realtek - Fix inverted bass GPIO pin on Acer 8951G
ALSA: hda/realtek - Dell headphone has noise on unmute for ALC236
ALSA: hda: hdmi - fix regression in connect list handling
ALSA: aloop: Avoid pointer dereference before null-check
ALSA: hda/hdmi - enable automatic runtime pm for AMD HDMI codecs by default
ALSA: hda/hdmi - enable runtime pm for newer AMD display audio
ALSA: hda/hdmi - Add new pci ids for AMD GPU display audio
ALSA: hda/hdmi - fix vgaswitcheroo detection for AMD
|
|
Pull more drm updates from Dave Airlie:
"Rob pointed out I missed his pull request for msm-next, it's been in
next for a while outside of my tree so shouldn't cause any unexpected
issues, it has some OCMEM support in drivers/soc that is acked by
other maintainers as it's outside my tree.
Otherwise it's a usual fixes pull, i915, amdgpu, the main ones, with
some tegra, omap, mgag200 and one core fix.
Summary:
msm-next:
- OCMEM support for a3xx and a4xx GPUs.
- a510 support + display support
core:
- mst payload deletion fix
i915:
- uapi alignment fix
- fix for power usage regression due to security fixes
- change default preemption timeout to 640ms from 100ms
- EHL voltage level display fixes
- TGL DGL PHY fix
- gvt - MI_ATOMIC cmd parser fix, CFL non-priv warning
- CI spotted deadlock fix
- EHL port D programming fix
amdgpu:
- VRAM lost fixes on BACO for CI/VI
- navi14 DC fixes
- misc SR-IOV, gfx10 fixes
- XGMI fixes for arcturus
- SRIOV fixes
amdkfd:
- KFD on ppc64le enabled
- page table optimisations
radeon:
- fix for r1xx/2xx register checker.
tegra:
- displayport regression fixes
- DMA API regression fixes
mgag200:
- fix devices that can't scanout except at 0 addr
omap:
- fix dma_addr refcounting"
* tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drm: (100 commits)
drm/dp_mst: Correct the bug in drm_dp_update_payload_part1()
drm/omap: fix dma_addr refcounting
drm/tegra: Run hub cleanup on ->remove()
drm/tegra: sor: Make the +5V HDMI supply optional
drm/tegra: Silence expected errors on IOMMU attach
drm/tegra: vic: Export module device table
drm/tegra: sor: Implement system suspend/resume
drm/tegra: Use proper IOVA address for cursor image
drm/tegra: gem: Remove premature import restrictions
drm/tegra: gem: Properly pin imported buffers
drm/tegra: hub: Remove bogus connection mutex check
ia64: agp: Replace empty define with do while
agp: Add bridge parameter documentation
agp: remove unused variable num_segments
agp: move AGPGART_MINOR to include/linux/miscdevice.h
agp: remove unused variable size in agp_generic_create_gatt_table
drm/dp_mst: Fix build on systems with STACKTRACE_SUPPORT=n
drm/radeon: fix r1xx/r2xx register checker for POT textures
drm/amdgpu: fix GFX10 missing CSIB set(v3)
drm/amdgpu: should stop GFX ring in hw_fini
...
|
|
Pull more block and io_uring updates from Jens Axboe:
"I wasn't expecting this to be so big, and if I was, I would have used
separate branches for this. Going forward I'll be doing separate
branches for the current tree, just like for the next kernel version
tree. In any case, this contains:
- Series from Christoph that fixes an inherent race condition with
zoned devices and revalidation.
- null_blk zone size fix (Damien)
- Fix for a regression in this merge window that caused busy spins by
sending empty disk uevents (Eric)
- Fix for a regression in this merge window for bfq stats (Hou)
- Fix for io_uring creds allocation failure handling (me)
- io_uring -ERESTARTSYS send/recvmsg fix (me)
- Series that fixes the need for applications to retain state across
async request punts for io_uring. This one is a bit larger than I
would have hoped, but I think it's important we get this fixed for
5.5.
- connect(2) improvement for io_uring, handling EINPROGRESS instead
of having applications needing to poll for it (me)
- Have io_uring use a hash for poll requests instead of an rbtree.
This turned out to work much better in practice, so I think we
should make the switch now. For some workloads, even with a fair
amount of cancellations, the insertion sort is just too expensive.
(me)
- Various little io_uring fixes (me, Jackie, Pavel, LimingWu)
- Fix for brd unaligned IO, and a warning for the future (Ming)
- Fix for a bio integrity data leak (Justin)
- bvec_iter_advance() improvement (Pavel)
- Xen blkback page unmap fix (SeongJae)
The major items in here are all well tested, and on the liburing side
we continue to add regression and feature test cases. We're up to 50
topic cases now, each with anywhere from 1 to more than 10 cases in
each"
* tag 'for-linus-20191205' of git://git.kernel.dk/linux-block: (33 commits)
block: fix memleak of bio integrity data
io_uring: fix a typo in a comment
bfq-iosched: Ensure bio->bi_blkg is valid before using it
io_uring: hook all linked requests via link_list
io_uring: fix error handling in io_queue_link_head
io_uring: use hash table for poll command lookups
io-wq: clear node->next on list deletion
io_uring: ensure deferred timeouts copy necessary data
io_uring: allow IO_SQE_* flags on IORING_OP_TIMEOUT
null_blk: remove unused variable warning on !CONFIG_BLK_DEV_ZONED
brd: warn on un-aligned buffer
brd: remove max_hw_sectors queue limit
xen/blkback: Avoid unmapping unmapped grant pages
io_uring: handle connect -EINPROGRESS like -EAGAIN
block: set the zone size in blk_revalidate_disk_zones atomically
block: don't handle bio based drivers in blk_revalidate_disk_zones
block: allocate the zone bitmaps lazily
block: replace seq_zones_bitmap with conv_zones_bitmap
block: simplify blkdev_nr_zones
block: remove the empty line at the end of blk-zoned.c
...
|
|
Pull vfs d_inode/d_flags memory ordering fixes from Al Viro:
"Fallout from tree-wide audit for ->d_inode/->d_flags barriers use.
Basically, the problem is that negative pinned dentries require
careful treatment - unless ->d_lock is locked or parent is held at
least shared, another thread can make them positive right under us.
Most of the uses turned out to be safe - the main surprises as far as
filesystems are concerned were
- race in dget_parent() fastpath, that might end up with the caller
observing the returned dentry _negative_, due to insufficient
barriers. It is positive in memory, but we could end up seeing the
wrong value of ->d_inode in CPU cache. Fixed.
- manual checks that result of lookup_one_len_unlocked() is positive
(and rejection of negatives). Again, insufficient barriers (we
might end up with inconsistent observed values of ->d_inode and
->d_flags). Fixed by switching to a new primitive that does the
checks itself and returns ERR_PTR(-ENOENT) instead of a negative
dentry. That way we get rid of boilerplate converting negatives
into ERR_PTR(-ENOENT) in the callers and have a single place to
deal with the barrier-related mess - inside fs/namei.c rather than
in every caller out there.
The guts of pathname resolution *do* need to be careful - the race
found by Ritesh is real, as well as several similar races.
Fortunately, it turns out that we can take care of that with fairly
local changes in there.
The tree-wide audit had not been fun, and I hate the idea of repeating
it. I think the right approach would be to annotate the places where
we are _not_ guaranteed ->d_inode/->d_flags stability and have sparse
catch regressions. But I'm still not sure what would be the least
invasive way of doing that and it's clearly the next cycle fodder"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs/namei.c: fix missing barriers when checking positivity
fix dget_parent() fastpath race
new helper: lookup_positive_unlocked()
fs/namei.c: pull positivity check into follow_managed()
|
